This CL refactors the handling of metadata associated with WebAssembly
modules to reduce the duplicate marshalling of data from the C++ world
to the JavaScript world. It does this by wrapping the C++ WasmModule*
object in a Foreign that is rooted from the on-heap WasmCompiledModule
(which is itself just a FixedArray). Upon serialization, the C++ object
is ignored and the original WASM wire bytes are serialized. Upon
deserialization, the C++ object is reconstituted by reparsing the bytes.
This is motivated by increasing complications in implementing the JS
API, in particular WebAssembly.Table, which must perform signature
canonicalization across instances.
Additionally, this CL implements the proper base + offset initialization
behavior for tables.
R=rossberg@chromium.org,bradnelson@chromium.org,mtrofin@chromium.org,yangguo@chromium.org
BUG=v8:5507, chromium:575167, chromium:657316
Review-Url: https://chromiumcodereview.appspot.com/2424623002
Cr-Commit-Position: refs/heads/master@{#40434}
MIPS64 doesn't support Word32 compare instructions. Instead it relies
that the values in registers are correctly sign-extended and uses
Word64 comparison instead. This behavior is correct in most cases,
but doesn't work when comparing signed with unsigned operands.
The solution proposed here tries to match a comparison of signed
with unsigned operand, and perform Word32Compare simulation only
in those cases. Unfortunately, the solution is not complete because
it might skip cases where Word32 compare simulation is needed, so
basically it is a hack.
BUG=
TEST=mjsunit/compiler/uint32
Review-Url: https://codereview.chromium.org/2391393003
Cr-Commit-Position: refs/heads/master@{#40398}
EffectPhis can cause a cycle in a TurboFan graph. We delay the
processing of EffectPhis in the Int64Lowering to break these cycles. We
do the same already for Phis.
R=titzer@chromium.org
BUG=v8:5518
TEST=unittests/Int64LoweringTest.EffectPhiLoop
Review-Url: https://codereview.chromium.org/2428583002
Cr-Commit-Position: refs/heads/master@{#40378}
This adds more useful information to the v8-heap-stats tool.
BUG=v8:5489
Review-Url: https://codereview.chromium.org/2394213003
Cr-Commit-Position: refs/heads/master@{#40361}
Adds a boolean flag to the liveness analysis which makes it also analyze
the accumulator. This can help prevent the accumulator escaping loops,
as well as decreasing the number of distinct state values nodes in the
graph.
The flag is a kind of ugly way to hack this in, however it is probably
the simplest to add, and (more importantly) to remove once the AST graph
builder is gone.
I measure a 2.6% improvement on Mandreel on my x64 machine, and a ~2%
improvement on Navier-Stokes. Other improvements are expected.
Review-Url: https://codereview.chromium.org/2428503002
Cr-Commit-Position: refs/heads/master@{#40359}
This allows people writing code stubs to just verify the graph of the stub they're working on, at least until we fix all of the issues we have and enable the verification by default.
Also fixes representations in CodeStubAssembler::SmiOr and InterpreterAssembler::StarDispatchLookahead.
R=bmeurer@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2413653006
Cr-Commit-Position: refs/heads/master@{#40320}
This CL also introduces a NoBarrierAtomicValue with NoBarrier accessors.
BUG=chromium:648568
Review-Url: https://codereview.chromium.org/2408233004
Cr-Commit-Position: refs/heads/master@{#40213}
For the asm.js to WASM pipeline, the current stack traces only show
low-level WASM information.
This CL maps this back to asm.js source positions.
It does so by attaching the asm.js source Script to the compiled WASM
module, and emitting a delta-encoded table which maps from WASM byte
offsets to positions within that Script. As asm.js code does not throw
exceptions, we only store a mapping for call instructions.
The new AsmJsWasmStackFrame implementation inherits from
WasmStackFrame, but contains the logic to provide the source script and
the position inside of it.
What is still missing is the JSFunction object returned by
CallSite.getFunction(). We currently return null.
R=jgruber@chromium.org, titzer@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2404253002
Cr-Commit-Position: refs/heads/master@{#40205}
If passing <nullptr, 0> to the decoder and trying to decode something,
it correctly detects the error and sets an error message, but still
returns true on ok(), and returns a valid result.
I triggered this error by passing a null Vector, returned by FindSection(), to
the decoder.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2410913002
Cr-Commit-Position: refs/heads/master@{#40204}
- Adds an optional representation field to VReg and TestOperand structs.
- Adds a simple FP allocation test to register-allocator-unittest.cc.
- Adds some simple FP tests to move-optimizer-unittest.cc.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2400513002
Cr-Commit-Position: refs/heads/master@{#40117}
There were once plans to generate cross-context code with TurboFan,
however that doesn't fit into the model anymore, and so all of this
is essentially dead untested code (and thus most likely already broken
in subtle ways). With this mode still in place it would also be a lot
harder to make inlining based on SharedFunctionInfo work.
BUG=v8:2206,v8:5499
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2406803002
Cr-Commit-Position: refs/heads/master@{#40109}
Found with libfuzzer. The length is automatically converted to int (thus
large sizes could become negative, even though they are legal "array sizes").
Besides that, the length is coerced to a SMI (which is an even tighter
constraint on 32-bit systems, where it limits the legal sizes to 2^30 - 1).
Add checks that the length of a dense array is below that threshold, and also
fail fast if a length that is provided obviously could not be the correct dense
length (because there isn't enough data left in the buffer to populate such an
array).
BUG=chromium:148757
Review-Url: https://codereview.chromium.org/2399873002
Cr-Commit-Position: refs/heads/master@{#40094}
Previously this would result in applying trying to find a size modulo zero,
which causes SIGFPE. This approach was preferred over adding a default case
to preserve the ability of the compiler to detect unhandled switch cases
(within the valid range of the enum).
BUG=chromium:148757
Review-Url: https://codereview.chromium.org/2395073003
Cr-Commit-Position: refs/heads/master@{#40088}
This reverts commit 7db0ecdec3.
Manual revert since automatic revert is too large for the web interface.
BUG=
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,yangguo@chromium.org,ahaas@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
Review-Url: https://codereview.chromium.org/2396353002
Cr-Commit-Position: refs/heads/master@{#40082}
Imports and exports in 0xC can be much more than functions, including
tables, memories, and globals. This CL refactors the underlying
organization of imports and exports to support these new import types.
BUG=
Committed: https://crrev.com/599f8a83420346d9cba5ff97bd2a7520468207b6
Review-Url: https://codereview.chromium.org/2390113003
Cr-Original-Commit-Position: refs/heads/master@{#40033}
Cr-Commit-Position: refs/heads/master@{#40050}
With this CL, we devolve all Constants introduced as they are with an object handle into
* Range - for integers
* Nan
* MinusZero
* OtherNumberConstant - for doubles
* HeapConstant
We reduce the amount we have to inspect an object handle during optimization. Also, simplifications result. For example, you never have to check if a Range contains a HeapConstant.
BUG=
Review-Url: https://codereview.chromium.org/2381523002
Cr-Commit-Position: refs/heads/master@{#40041}
Imports and exports in 0xC can be much more than functions, including
tables, memories, and globals. This CL refactors the underlying
organization of imports and exports to support these new import types.
BUG=
Review-Url: https://codereview.chromium.org/2390113003
Cr-Commit-Position: refs/heads/master@{#40033}
Reason for revert:
Speculative revert due to very strange-looking win/dbg failures
which reference SignedDivisionByConstant:
https://build.chromium.org/p/client.v8/builders/V8%20Win64%20-%20debug/builds/12736
Original issue's description:
> Reland "Turn libbase into a component"
>
> Original issue's description:
> > Turn libbase into a component
> >
> > This is a precondition for turning libplatform into a component
> >
> > BUG=v8:5412
> > R=jgruber@chromium.org,machenbach@chromium.org
> > CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_
> dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe
> >
> > Committed: https://crrev.com/614e615775f732d71b5ee94ed29737d8de687104
> > Cr-Commit-Position: refs/heads/master@{#39950}
>
> BUG=v8:5412
> TBR=jgruber@chromium.org,machenbach@chromium.org
> CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe;master.tryserver.chromium.mac:mac_chromium_compile_dbg_ng
>
> Committed: https://crrev.com/17cb51254cafa932025e9980b60f89f756d411cb
> Cr-Commit-Position: refs/heads/master@{#39969}
TBR=jgruber@chromium.org,machenbach@chromium.org,jochen@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5412
Review-Url: https://codereview.chromium.org/2396933002
Cr-Commit-Position: refs/heads/master@{#40009}
If possible, take the constant map from the (known) native context for
JSCreateIterResultObject, so that subsequent map checks can be
eliminated in case of iterator inlining.
R=jarin@chromium.org
BUG=v8:3822
Review-Url: https://codereview.chromium.org/2394783002
Cr-Commit-Position: refs/heads/master@{#39974}
Original issue's description:
> Turn libbase into a component
>
> This is a precondition for turning libplatform into a component
>
> BUG=v8:5412
> R=jgruber@chromium.org,machenbach@chromium.org
> CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_
dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe
>
> Committed: https://crrev.com/614e615775f732d71b5ee94ed29737d8de687104
> Cr-Commit-Position: refs/heads/master@{#39950}
BUG=v8:5412
TBR=jgruber@chromium.org,machenbach@chromium.org
CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe;master.tryserver.chromium.mac:mac_chromium_compile_dbg_ng
Review-Url: https://codereview.chromium.org/2395553002
Cr-Commit-Position: refs/heads/master@{#39969}
Reason for revert:
Main suspect for roll block:
https://codereview.chromium.org/2387403002/
Original issue's description:
> Turn libbase into a component
>
> This is a precondition for turning libplatform into a component
>
> BUG=v8:5412
> R=jgruber@chromium.org,machenbach@chromium.org
> CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe
>
> Committed: https://crrev.com/614e615775f732d71b5ee94ed29737d8de687104
> Cr-Commit-Position: refs/heads/master@{#39950}
TBR=jgruber@chromium.org,jochen@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5412
Review-Url: https://codereview.chromium.org/2393603002
Cr-Commit-Position: refs/heads/master@{#39960}
This is a precondition for turning libplatform into a component
BUG=v8:5412
R=jgruber@chromium.org,machenbach@chromium.org
CQ_INCLUDE_TRYBOTS=master.tryserver.chromium.linux:linux_chromium_compile_dbg_ng;master.tryserver.chromium.android:android_clang_dbg_recipe
Review-Url: https://codereview.chromium.org/2381273002
Cr-Commit-Position: refs/heads/master@{#39950}
There are only a few occasions where we allocate a register in an outer
expression allocation scope, which makes the costly free-list approach
of the BytecodeRegisterAllocator unecessary. This CL replaces all
occurrences with moves to the accumulator and stores to a register
allocated in the correct scope. By doing this, we can simplify the
BytecodeRegisterAllocator to be a simple bump-pointer allocator
with registers released in the same order as allocated.
The following changes are also made:
- Make BytecodeRegisterOptimizer able to use registers which have been
unallocated, but not yet reused
- Remove RegisterExpressionResultScope and rename
AccumulatorExpressionResultScope to ValueExpressionResultScope
- Introduce RegisterList to represent consecutive register
allocations, and use this for operands to call bytecodes.
By avoiding the free-list handling, this gives another couple of
percent on CodeLoad.
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2369873002
Cr-Commit-Position: refs/heads/master@{#39905}
This patch replaces cumulative counters with the counters for the current GC cycle.
It also replaces the ring buffer of record incremental marking speeds with a single variable.
Review-Url: https://codereview.chromium.org/2361563004
Cr-Commit-Position: refs/heads/master@{#39826}
This matches current Crankshaft/fullcodegen behavior more closely and
thus reduces the chances that we run into unnecessary polymorphism due
to the field representation tracking in our object model.
Drive-by-fixes: Make sure the JSRegExp::lastIndex field stays Smi
if possible (otherwise we tank the regexp benchmark in Octane).
CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_mac64_rel,v8_mac64_dbg
R=jarin@chromium.org
BUG=v8:5267
Committed: 6a939714e9
Committed: https://crrev.com/ee158e6c4cc896479a32245432a3c2fdd31bcb73
Committed: https://crrev.com/ddf792beb3a72f6dba83e94fc8ada03ebf1630bd
Review-Url: https://codereview.chromium.org/2367593003
Cr-Original-Original-Commit-Position: refs/heads/master@{#39692}
Cr-Original-Commit-Position: refs/heads/master@{#39748}
Cr-Commit-Position: refs/heads/master@{#39803}
[0xC] Convert to stack machine semantics.
[0xC] Use section codes instead of names.
[0xC] Add elements section decoding.
[0xC] Decoding of globals section.
[0xC] Decoding of memory section.
[0xC] Decoding of imports section.
[0xC] Decoding of exports section.
[0xC] Decoding of data section.
[0xC] Remove CallImport bytecode.
[0xC] Function bodies have an implicit block.
[0xC] Remove the bottom label from loops.
[0xC] Add signatures to blocks.
[0xC] Remove arities from branches.
Add tests for init expression decoding.
Rework compilation of import wrappers and how they are patched.
Rework function indices in debugging.
Fix ASM->WASM builder for stack machine.
Reorganize asm.js foreign functions due to import indices change.
R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
BUG=chromium:575167
LOG=Y
Committed: https://crrev.com/76eb976a67273b8c03c744f64ad850b0432554b9
Review-Url: https://codereview.chromium.org/2345593003
Cr-Original-Commit-Position: refs/heads/master@{#39678}
Cr-Commit-Position: refs/heads/master@{#39795}
The lowering of {JSToBoolean} operators in {JSTypedLowering} inserts
loads that are not part of the effect chain. This does not play well
with effect-sensitive data flow analysis (e.g. escape analysis). This
removes the lowering in question, we can implement it using a dedicated
simplified operator eventually if needed.
R=bmeurer@chromium.org
TEST=mjsunit/wasm/embenchen/lua_binarytrees
Review-Url: https://codereview.chromium.org/2366363003
Cr-Commit-Position: refs/heads/master@{#39773}
They are nops, but will be used when verifying the machine graph.
BUG=
Review-Url: https://codereview.chromium.org/2367413002
Cr-Commit-Position: refs/heads/master@{#39758}
The MachineOperatorReducer was only reducing word32 expressions of the type x << y | x >>> (32 - y) (and variants) to the equivalent Word32Ror. This CL applies the same pattern-matching logic to Word32Xor.
BUG=
Committed: https://crrev.com/a86397d890d3caa01a947e2a6e71beb1f58e6e6b
Review-Url: https://codereview.chromium.org/2199323003
Cr-Original-Commit-Position: refs/heads/master@{#38284}
Cr-Commit-Position: refs/heads/master@{#39757}
Reason for revert:
Tanks EarleyBoyer.
Original issue's description:
> [compiler] Properly guard the speculative optimizations for instanceof.
>
> Add a general feedback slot for instanceof similar to what we already have
> for for-in, which basically has a fast (indicated by the uninitialized
> sentinel) and a slow (indicated by the megamorphic sentinel) mode. Now
> we can only take the fast path when the feedback slot says it hasn't
> seen any funky inputs and nothing funky appeared in the prototype chain.
> In the TurboFan code we also deoptimize whenever we see a funky object
> (i.e. a proxy or an object that requires access checks) in the prototype
> chain (similar to what Crankshaft already did).
>
> Drive-by-fix: Also make Crankshaft respect the mode and therefore
> address the deopt loop in Crankshaft around instanceof.
>
> We might want to introduce an InstanceOfIC mechanism at some point and
> track the map of the right-hand side.
>
> BUG=v8:5267
> R=mvstanton@chromium.org
>
> Committed: https://crrev.com/a0484bc6116ebc2b855de87d862945e2ae07169b
> Cr-Commit-Position: refs/heads/master@{#39718}
TBR=mvstanton@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2365223003
Cr-Commit-Position: refs/heads/master@{#39736}
Add a general feedback slot for instanceof similar to what we already have
for for-in, which basically has a fast (indicated by the uninitialized
sentinel) and a slow (indicated by the megamorphic sentinel) mode. Now
we can only take the fast path when the feedback slot says it hasn't
seen any funky inputs and nothing funky appeared in the prototype chain.
In the TurboFan code we also deoptimize whenever we see a funky object
(i.e. a proxy or an object that requires access checks) in the prototype
chain (similar to what Crankshaft already did).
Drive-by-fix: Also make Crankshaft respect the mode and therefore
address the deopt loop in Crankshaft around instanceof.
We might want to introduce an InstanceOfIC mechanism at some point and
track the map of the right-hand side.
BUG=v8:5267
R=mvstanton@chromium.org
Review-Url: https://codereview.chromium.org/2370693002
Cr-Commit-Position: refs/heads/master@{#39718}
This matches current Crankshaft/fullcodegen behavior more closely and
thus reduces the chances that we run into unnecessary polymorphism due
to the field representation tracking in our object model.
R=jarin@chromium.org
BUG=v8:5267
Committed: 6a939714e9
Review-Url: https://codereview.chromium.org/2367593003
Cr-Commit-Position: refs/heads/master@{#39692}
Reason for revert:
Main suspect for tsan:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20TSAN/builds/11893
Also changes layout tests:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/10036
+mips builder:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Mips%20-%20builder/builds/4032
Original issue's description:
> [wasm] Master CL for Binary 0xC changes.
>
> [0xC] Convert to stack machine semantics.
> [0xC] Use section codes instead of names.
> [0xC] Add elements section decoding.
> [0xC] Decoding of globals section.
> [0xC] Decoding of memory section.
> [0xC] Decoding of imports section.
> [0xC] Decoding of exports section.
> [0xC] Decoding of data section.
> [0xC] Remove CallImport bytecode.
> [0xC] Function bodies have an implicit block.
> [0xC] Remove the bottom label from loops.
> [0xC] Add signatures to blocks.
> [0xC] Remove arities from branches.
> Add tests for init expression decoding.
> Rework compilation of import wrappers and how they are patched.
> Rework function indices in debugging.
> Fix ASM->WASM builder for stack machine.
> Reorganize asm.js foreign functions due to import indices change.
>
> R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
> BUG=chromium:575167
> LOG=Y
>
> Committed: https://crrev.com/76eb976a67273b8c03c744f64ad850b0432554b9
> Cr-Commit-Position: refs/heads/master@{#39678}
TBR=ahaas@chromium.org,bradnelson@chromium.org,mtrofin@chromium.org,rossberg@chromium.org,bradnelson@google.com,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:575167
Review-Url: https://codereview.chromium.org/2361053004
Cr-Commit-Position: refs/heads/master@{#39685}
[0xC] Convert to stack machine semantics.
[0xC] Use section codes instead of names.
[0xC] Add elements section decoding.
[0xC] Decoding of globals section.
[0xC] Decoding of memory section.
[0xC] Decoding of imports section.
[0xC] Decoding of exports section.
[0xC] Decoding of data section.
[0xC] Remove CallImport bytecode.
[0xC] Function bodies have an implicit block.
[0xC] Remove the bottom label from loops.
[0xC] Add signatures to blocks.
[0xC] Remove arities from branches.
Add tests for init expression decoding.
Rework compilation of import wrappers and how they are patched.
Rework function indices in debugging.
Fix ASM->WASM builder for stack machine.
Reorganize asm.js foreign functions due to import indices change.
R=ahaas@chromium.org,rossberg@chromium.org,bradnelson@chromium.org
BUG=chromium:575167
LOG=Y
Review-Url: https://codereview.chromium.org/2345593003
Cr-Commit-Position: refs/heads/master@{#39678}
This makes sure the {EscapeAnalysisReducer} inserts proper {TypeGuard}
nodes if the replacement node is not a subtype of the original node.
This happens predominantly for code that has been made unreachable by
type checks.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-crbug-640497
BUG=chromium:640497
Review URL: https://codereview.chromium.org/2363573003 .
Cr-Commit-Position: refs/heads/master@{#39656}
This matches current Crankshaft/fullcodegen behavior more closely and
thus reduces the chances that we run into unnecessary polymorphism due
to the field representation tracking in our object model.
R=jarin@chromium.org
BUG=v8:5267
Review URL: https://codereview.chromium.org/2367593003 .
Cr-Commit-Position: refs/heads/master@{#39655}
Rename the high-level operators CheckTaggedSigned to CheckSmi and
CheckTaggedPointer to CheckHeapObject, to better match the naming
convention (i.e. ObjectIsSmi and CheckSmi, ObjectIsString and
CheckString, etc.).
For lowering CheckSmi, always report TaggedSigned representation
and let the RepresentationChanger come up with a reasonable conversion
from whatever input representation to TaggedSigned. This way we no
longer insert the useless ChangeSomethingToTagged and then Smi check
the result sequences, i.e. mostly reduces the amount of useless code
being generated. But we also observe a few performance improvements
on some crypto benchmarks.
This would enable us to avoid the Smi canonicalization when going from
Float64 to Tagged completely and thus match the representation selection
of Crankshaft in many areas (which might reduce the amount of
polymorphism until we fix our object model).
A follow-up CL will do the same for CheckHeapObject.
BUG=v8:5267
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/2362173003 .
Cr-Commit-Position: refs/heads/master@{#39654}
This CL optimizes the code in BytecodeArrayBuilder and
BytecodeArrayWriter by making the following main changes:
- Move operand scale calculation out of BytecodeArrayWriter to the
BytecodeNode constructor, where the decision on which operands are
scalable can generally be statically decided by the compiler.
- Move the maximum register calculation out of BytecodeArrayWriter
and into BytecodeRegisterOptimizer (which is the only place outside
BytecodeGenerator which updates which registers are used). This
avoids the BytecodeArrayWriter needing to know the operand types
of a node as it writes it.
- Modify EmitBytecodes to use individual push_backs rather than
building a buffer and calling insert, since this turns out to be faster.
- Initialize BytecodeArrayWriter's bytecode vector by reserving 512
bytes,
- Make common functions in Bytecodes constexpr so that they
can be statically calculated by the compiler.
- Move common functions and constructors in Bytecodes and
BytecodeNode to the header so that they can be inlined.
- Change large static switch statements in Bytecodes to const array
lookups, and move to the header to allow inlining.
I also took the opportunity to remove a number of unused helper
functions, and rework some others for consistency.
This reduces the percentage of time spent in making BytecodeArrays
in CodeLoad from ~15% to ~11% according to perf. The
CoadLoad score increase by around 2%.
BUG=v8:4280
Committed: https://crrev.com/b11a8b4d41bf09d6b3d6cf214fe3fb61faf01a64
Review-Url: https://codereview.chromium.org/2351763002
Cr-Original-Commit-Position: refs/heads/master@{#39599}
Cr-Commit-Position: refs/heads/master@{#39637}
Generate TBZ/TBNZ for certain comparisons against zero. E.g. instead of:
cmp w0, 0x0
b.lt/ge <addr>
we can generate:
tbnz/tbz w0, 31, <addr>
BUG=
Review-Url: https://codereview.chromium.org/2359723004
Cr-Commit-Position: refs/heads/master@{#39620}
Port for VisitFloat32Add, VisitFloat64Add, VisitFloat32Sub and
VisitFloat64Sub in InstructionSelector.
TEST=unittests/InstructionSelectorTest.Float32AddWithFloat32Mul,
unittests/InstructionSelectorTest.Float64AddWithFloat64Mul,
unittests/InstructionSelectorTest.Float32SubWithFloat32Mul,
unittests/InstructionSelectorTest.Float64SubWithFloat64Mul
BUG=
Review-Url: https://codereview.chromium.org/2341303002
Cr-Commit-Position: refs/heads/master@{#39616}
This makes sure cycles in the object states graph are detected early by
escape analysis instead of late in the scheduler. This is mainly done
for improved debuggability.
R=bmeurer@chromium.org
BUG=chromium:613923
Review-Url: https://codereview.chromium.org/2354263002
Cr-Commit-Position: refs/heads/master@{#39614}
Reason for revert:
Prime suspect for roll blocker: https://codereview.chromium.org/2362503002/
Original issue's description:
> [Interpreter] Optimize BytecodeArrayBuilder and BytecodeArrayWriter.
>
> This CL optimizes the code in BytecodeArrayBuilder and
> BytecodeArrayWriter by making the following main changes:
>
> - Move operand scale calculation out of BytecodeArrayWriter to the
> BytecodeNode constructor, where the decision on which operands are
> scalable can generally be statically decided by the compiler.
> - Move the maximum register calculation out of BytecodeArrayWriter
> and into BytecodeRegisterOptimizer (which is the only place outside
> BytecodeGenerator which updates which registers are used). This
> avoids the BytecodeArrayWriter needing to know the operand types
> of a node as it writes it.
> - Modify EmitBytecodes to use individual push_backs rather than
> building a buffer and calling insert, since this turns out to be faster.
> - Initialize BytecodeArrayWriter's bytecode vector by reserving 512
> bytes,
> - Make common functions in Bytecodes constexpr so that they
> can be statically calculated by the compiler.
> - Move common functions and constructors in Bytecodes and
> BytecodeNode to the header so that they can be inlined.
> - Change large static switch statements in Bytecodes to const array
> lookups, and move to the header to allow inlining.
>
> I also took the opportunity to remove a number of unused helper
> functions, and rework some others for consistency.
>
> This reduces the percentage of time spent in making BytecodeArrays
> in CodeLoad from ~15% to ~11% according to perf. The
> CoadLoad score increase by around 2%.
>
> BUG=v8:4280
>
> Committed: https://crrev.com/b11a8b4d41bf09d6b3d6cf214fe3fb61faf01a64
> Cr-Commit-Position: refs/heads/master@{#39599}
TBR=mythria@chromium.org,leszeks@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2360193003
Cr-Commit-Position: refs/heads/master@{#39612}
This CL optimizes the code in BytecodeArrayBuilder and
BytecodeArrayWriter by making the following main changes:
- Move operand scale calculation out of BytecodeArrayWriter to the
BytecodeNode constructor, where the decision on which operands are
scalable can generally be statically decided by the compiler.
- Move the maximum register calculation out of BytecodeArrayWriter
and into BytecodeRegisterOptimizer (which is the only place outside
BytecodeGenerator which updates which registers are used). This
avoids the BytecodeArrayWriter needing to know the operand types
of a node as it writes it.
- Modify EmitBytecodes to use individual push_backs rather than
building a buffer and calling insert, since this turns out to be faster.
- Initialize BytecodeArrayWriter's bytecode vector by reserving 512
bytes,
- Make common functions in Bytecodes constexpr so that they
can be statically calculated by the compiler.
- Move common functions and constructors in Bytecodes and
BytecodeNode to the header so that they can be inlined.
- Change large static switch statements in Bytecodes to const array
lookups, and move to the header to allow inlining.
I also took the opportunity to remove a number of unused helper
functions, and rework some others for consistency.
This reduces the percentage of time spent in making BytecodeArrays
in CodeLoad from ~15% to ~11% according to perf. The
CoadLoad score increase by around 2%.
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2351763002
Cr-Commit-Position: refs/heads/master@{#39599}
This is some initial cleanup to keep /src clean. The
AccountingAllocator is actually exclusively used by zones and this
common subfolder makes that more clear.
BUG=v8:5409
Review-Url: https://codereview.chromium.org/2344143003
Cr-Commit-Position: refs/heads/master@{#39558}
This means we can no longer take the closure's context to parse, but
need to rely on the outer scope info.
Since it's not possible to get that, however, for lazy functions, we
introduce a new field to SharedFunctionInfo that stores the outer scope
info whenever available.
BUG=v8:5215
R=marja@chromium.org,verwaest@chromium.org,jgruber@chromium.org
Review-Url: https://codereview.chromium.org/2358503002
Cr-Commit-Position: refs/heads/master@{#39548}
Adds a fast path for loading DYNAMIC_GLOBAL variables, which are lookup
variables that can be globally loaded, without calling the runtime, as long as
there was no context extension by a sloppy eval along their context chain.
BUG=v8:5263
Review-Url: https://codereview.chromium.org/2347143002
Cr-Commit-Position: refs/heads/master@{#39537}
For denominators that are powers of two, replace Float64 division with
multiplication by the reciprocal.
Additionally, replace division by -1 with negation, and multiplication by two
with addition.
BUG=
Review-Url: https://codereview.chromium.org/2347573002
Cr-Commit-Position: refs/heads/master@{#39478}
Adds a fast path for loading DYNAMIC_LOCAL variables, which are lookup
variables that can be context loaded, without calling the runtime, as
long as there was no context extension by a sloppy eval along their
context chain.
BUG=v8:5263
Review-Url: https://codereview.chromium.org/2343633002
Cr-Commit-Position: refs/heads/master@{#39473}
To avoid a dependency on the heap during parsing, we only create a scope chain
without linking to the associated ScopeInfo objects before parsing. This is
enough to avoid special cases during parsing of arrow functions / eval.
Looking at the outer scope's variables during parsing was only needed for hosting
sloppy block functions inside eval. To be able to do this now, we hoist for the
outer-most eval scope after parsing, in DeclarationScope::Analyze.
DeclarationScope::Analyze is also where we replace the outer scope chain with the
fully deserialized version, so variables can be resolved.
Also, this unifies background and foreground thread parsing, as we don't have to
worry about ScopeInfos getting accessed before we're back on the main thread.
BUG=v8:5215
R=verwaest@chromium.org,marja@chromium.org,adamk@chromium.org
Review-Url: https://codereview.chromium.org/2306413002
Cr-Commit-Position: refs/heads/master@{#39452}
