inline allocation code used the expected number of properties to
calculate the number of inobject properties for an object instead of
getting the actual number from the initial map.
It is safer to use the inobject property count from the initial map in
any case because that is the amount the instances will get. I think
this disconnect got introduced when adding shrinking of objects.
Unfortuntely I haven't been able to create a simple reproduction for a
test case but this fixes the webpage that exhibits the crash. I'll see
if I can create a reproduction tomorrow.
Review URL: http://codereview.chromium.org/5278003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5879 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Contextual load requires only a map check followed by a cell hole
check so we can generate pretty compact code for that. The fact that
we have inlined code is marked by mov ecx, offset instruction after
the IC call. Inlining is only enabled inside loops and in non-builtin
functions.
The generated code size increase is about 3%. This descreased the
pc-to-code cache hit rate in some of the benchmarks that trigger
GC. To compensate we now have 4 times as much entries in the cache.
Review URL: http://codereview.chromium.org/3402014
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5497 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Object model changes
----------------------------------------
New fixed_cow_array_map is used for the elements array of a JSObject
to mark it as COW. The JSObject's map and other fields are not
affected. The JSObject's map still has the "fast elements" bit set. It
means we can do only the receiver map check in keyed loads and the
receiver and the elements map checks in keyed stores. So introducing
COW arrays doesn't hurt performance of these operations. But note that
the elements map check is necessary in all mutating operations because
the "has fast elements" bit now means "has fast elements for reading".
EnsureWritableFastElements can be used in runtime functions to perform
the necessary lazy copying.
Generated code changes
----------------------------------------
Generic keyed load is updated to only do the receiver map check (this
could have been done earlier). FastCloneShallowArrayStub now has two
modes: clone elements and use COW elements. AssertFastElements macro
is added to check the elements when necessary. The custom call IC
generators for Array.prototype.{push,pop} are updated to avoid going
to the slow case (and patching the IC) when calling the builtin should
work.
COW enablement
----------------------------------------
Currently we only put shallow and simple literal arrays in the COW
mode. This is done by the parser.
Review URL: http://codereview.chromium.org/3144002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5275 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
These string methods can be composed from two basic blocks: charCodeAt
and fromCharCode, both of which have fast cases for certain types of
inputs. In this patch these two blocks are refactored to allow
generating the fast cases without having to jump around the slow
cases. In the slow cases since they can now be invoked both from
inline runtime functions and from IC stubs we either have to
save/restore state of the current frame or enter/leave a new internal
frame. This is handled by new RuntimeCallHelper interface. Its
implementation for virtual frame is based on FrameRegisterState class
extracted from DeferredCode class.
Review URL: http://codereview.chromium.org/2087009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4733 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1) do not push receiver early---that simplifies tail call preparation
on ia32/x64 and renders special cleanup unnecessary;
2) do not do second map check if interceptor's and cached holder
are the same;
3) do not push/pop receiver if receiver and holder registers are the same
(means that receiver is interceptor's holder);
4) do batch pushes on arm;
5) minor cosmetic improvements.
Review URL: http://codereview.chromium.org/2282001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4732 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The calling convention for keyed store IC on ARM is changed to receive the arguments value, key and receiver in registers r0, r1 and r2 instead of on the stack. When calling keyed store IC with a virtual frame the arguments are passed through the virtual frame and consumed by the call.
Changed the register usage in the IC code to postpone spilling the registers holding value, key and receiver to the stack until making a call into the runtime system.
Runs all the tests with:
--special-command="@ --nofull-compiler"
--special-command="@ --always-full-compiler"
--special-command="@ --noenable-vfp3"
Review URL: http://codereview.chromium.org/2116003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4668 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Chromium build.
v8.gyp no longer sets any V8_TARGET_ARCH_* macro on the Mac. Instead, the
proper V8_TARGET_ARCH_* macro will be set by src/globals.h in the same way as
the V8_HOST_ARCH_* macro when it detects that no target macro is currently
defined. The Mac build will attempt to compile all ia32 and x86_64 .cc files.
#ifdef guards in each of these target-specific source files prevent their
compilation when the associated target is not selected. For completeness,
these #ifdef guards are also provided for the arm and mips .cc files.
BUG=706
TEST=x86_64 Mac GYP/Xcode-based Chromium build (still depends on other changes)
Review URL: http://codereview.chromium.org/2133003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4666 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The calling convention for keyed load IC's on ARM now passes the key and receiver in registers r0 and r1.
The code path in the ARM full compiler for handling keyed property load now has the same structure as for ia32 where the keyed load IC is also called with key end receiver in registers.
This change have been tested with an exhaustive combinations of the flags
--special-command="@ --nofull-compiler"
--special-command="@ --always-full-compiler"
--special-command="@ --noenable-vfp3"
to the test runner.
Review URL: http://codereview.chromium.org/2024002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4608 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The calling convention for keyed load IC is changed to have the key passed both in a register (r0) and on the stack.
Next steps will be first to remove the key from the stack and then pass the receiver in a register (r1).
Review URL: http://codereview.chromium.org/1937003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4584 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
is both on top of the stack and also in r0. This makes
sense because the receiver is usually in r0 anyway. We may
remove it from the stack later. Also removes some spilled
scopes from the code generator allowing it to keep expression
temporaries in registers more.
Review URL: http://codereview.chromium.org/1751019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4518 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
We need to be careful to check global property cells for the property
encountered during lookup. Therefore, the ICs have to be specific to
the name of the property if global objects are involved. In
principle, this means that we could get a large number of monomorphic
ICs for the same map if there is a global object in the prototype
chain. However, since this is only done for normal load ICs and not
for keyed load ICs I do not expect this to be a problem. I will
experiment with it once this goes in.
BUG=675
Review URL: http://codereview.chromium.org/1559033
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4426 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
registration of external references in Proxy objects).
I moved the declaration of the two functions to stub-cache.h
because with all the types they use it's hard to declare them
anywhere else. But the actual definition is still in runtime.cc
near to the place where they are used.
Review URL: http://codereview.chromium.org/1079012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4231 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Replaced IsValid by IsPropertyOrTransition and used IsProperty in most
of the places where IsValid was used before. Most of the time when
inspecting a lookup result we really want to know if there is a real
property present. Only for stores are we interested in transitions.
BUG=http://crbug.com/20104
TEST=cctest/test-api/NamedInterceptorMapTransitionRead
Review URL: http://codereview.chromium.org/647015
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3901 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When a function is called with a value type as the receiver this is now boxed as an object.
This is a low-impact solution where the receiver is only boxed when required. For IC calls to the V8 builtins values are not boxed and as most of the functions on String.prototype, Number.prototype and Boolean.prototype are sitting there most IC calls on values will not need any boxing of the receiver.
For calls which are not IC calls but calls through the CallFunctionStub a flag is used to determine whether the receiver might be a value and only when that is the case will the receiver be boxed.
No changtes to Function.call and Function.apply - they already boxed values. According to the ES5 spec the receiver should not be boxed for these functions, but current browsers have not adopted that change yet.
BUG=223
TEST=test/mjsunit/value-wrapper.js
TEST=test/mjsunit/regress/regress-crbug-3184.js
Review URL: http://codereview.chromium.org/542087
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3617 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The different length string types was used to encode the string length and the hash in one field. This is now split into two fields one for length and one for hash. The hash field still encodes the array index of the string if it has one. If an array index is encoded in the hash field the string length is added to the top bits of the hash field to avoid a hash value of zero.
On 32-bit this causes an additional 4 bytes to be used for all string objects. On 64-bit this will be half on average dur to pointer alignment.
Review URL: http://codereview.chromium.org/436001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3350 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
For objects which only have simple assignments of the form this.x = ...; a
specialized constructor stub is now generated. This generated code allocates the
object and fills in the initial properties directly. If this fails for some
reason code continues in the generic constructor stub which in turn might pass
control to the runtime system.
Added counter to see how many objects are constructed using a specialized stub.
The specialized stub is only implemented for ia32 architecture in this change.
For x64 and ARM the generic construct stub is used.
This is change is identical to http://codereview.chromium.org/174392 (committed in r2753 and reverted in r2754) except that a few parts have already been committed from http://codereview.chromium.org/173469 (committed in r2762).
Review URL: http://codereview.chromium.org/173470
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2764 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
For objects which only have simple assignments of the form this.x = ...; a specialized constructor stub is now generated. This generated code allocates the object and fills in the initial properties directly. If this fails for some reason code continues in the generic constructor stub which in turn might pass control to the runtime system.
Added counter to see how many objects are constructed using a specialized stub.
The specialized stub is only implemented for ia32 architecture in this change. For x64 and ARM the generic construct stub is used.
Review URL: http://codereview.chromium.org/174392
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2753 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Remove the check for deleted properties in the global load inline cache if the property is known to be read only.
Propegate the in loop flag for the global call inline cache.
Changed the propagation of the code flags in the call stub compiler to compute these the same way for all types of call stubs and assert that the flags for the generated code is the same as those used for the cache lookup.
Addressed a few comments from previous review in test-api.cc.
Review URL: http://codereview.chromium.org/150101
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2308 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
submitted in revisions 2093, 2094, 2099, and 2106.
There's no evidence that supports that these changes
should be the cause of the unexplained performance
regressions on the intl2 and DHTML page cyclers.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2109 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
called from within a loop or not. In the past we lost the
information if a call site went megamorphic before a lazily
compiled callee was called for the first time. Now we track
that correctly (this is an issue that affects richards).
We still don't manage to track the in-loop state through a
constructor call, since constructor calls use LoadICs instead
of CallICs. This issue affects delta-blue. So in this patch
we assume that lazy compilations that don't happen through a
CallIC happen from inside a loop. I have an idea to fix this
but this patch is big enough already.
With our improved tracking of in-loop state I have switched
off the inlining of in-object loads for code that is not in
a loop. This benefits compile speed. One issue is that
eagerly compiled code now doesn't get the in-object loads
inlined. We need to eagerly compile less code to fix this.
Review URL: http://codereview.chromium.org/115744
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2046 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This issue was raised by Brett Wilson while reviewing my changelist for readability. Craig Silverstein (one of C++ SG maintainers) confirmed that we should declare one namespace per line. Our way of namespaces closing seems not violating style guides (there is no clear agreement on it), so I left it intact.
Review URL: http://codereview.chromium.org/115756
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2038 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
