Commit Graph

102 Commits

Author SHA1 Message Date
Ben L. Titzer
6aa2a25313 [wasm] Add WasmFeatures to enable/detect features
This CL introduces a set of configuration options implemented as
a struct of booleans that together comprise the set of enabled
or detected features. The configuration options replace command-line
flags that were checked deep in the implementation. As such, it is
necessary to plumb them through multiple levels of abstraction.

R=ahaas@chromium.org
CC=mstarzinger@chromium.org
BUG=chromium:868844

Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I1b82f5826e4fd263f68e8cafcd923bac5818a637
Reviewed-on: https://chromium-review.googlesource.com/1163670
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55018}
2018-08-09 10:58:22 +00:00
Michael Starzinger
7579b1e3c8 [wasm] Support concurrent patching of jump table.
This adds initial support for concurrently patching jump table slots. It
is needed once different Isolates share code (for the --wasm-shared-code
feature). We need to ensure that instructions holding the target address
within a jump table slot do not cross cache-line boundaries. To do this,
the jump table has been split into consecutive pages.

Note that this also adds a stress test for multiple threads hammering at
a single slot concurrently. The test is currently limited to the ia32
and the x64 architecture, but will be extended to cover others. The test
reliably triggers tearing of the target address on almost every run of
the test and hence serves to prevent regressions.

R=clemensh@chromium.org
TEST=cctest/test-jump-table-assembler
BUG=v8:8018

Change-Id: Ife56bbb61ffcae5d8906ca7b8c604b195603707c
Reviewed-on: https://chromium-review.googlesource.com/1163664
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54942}
2018-08-07 11:20:09 +00:00
Georgia Kouveli
079eee4387 [arm][arm64] Fix TurboAssembler tests for hard aborts
The tests were not flushing the i-cache before calling the generated
code. Use Factory::NewCode to make sure that the i-cache is flushed
instead.

Bug: v8:7977
Change-Id: I9c7c6f0d0e31700634e50279e75858a5d74603d8
Reviewed-on: https://chromium-review.googlesource.com/1150165
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Georgia Kouveli <georgia.kouveli@arm.com>
Cr-Commit-Position: refs/heads/master@{#54711}
2018-07-26 09:12:58 +00:00
Clemens Hammacher
d324382e1c Reland "[turboassembler] Introduce hard-abort mode"
This is a reland of a462a7854a

Original change's description:
> [turboassembler] Introduce hard-abort mode
> 
> For checks and assertions (mostly for debug code, like stack alignment
> or zero extension), we had two modes: Emit a call to the {Abort}
> runtime function (the default), and emit a debug break (used for
> testing, enabled via --trap-on-abort).
> In wasm, where we cannot just call a runtime function because code must
> be isolate independent, we always used the trap-on-abort behaviour.
> This causes problems for our fuzzers, which do not catch SIGTRAP, and
> hence do not detect debug code failures.
> 
> This CL introduces a third mode ("hard abort"), which calls a C
> function via {ExternalReference}. The C function still outputs the
> abort reason, but does not print the stack trace. It then aborts via
> "OS::Abort", just like the runtime function.
> This will allow fuzzers to detect the crash and even find a nice error
> message.
> 
> Even though this looks like a lot of code churn, it is actually not.
> Most added lines are new tests, and other changes are minimal.
> 
> R=mstarzinger@chromium.org
> 
> Bug: chromium:863799
> Change-Id: I77c58ff72db552d49014614436259ccfb49ba87b
> Reviewed-on: https://chromium-review.googlesource.com/1142163
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#54592}

Bug: chromium:863799
Change-Id: I7729a47b4823a982a8e201df36520aa2b6ef5326
Reviewed-on: https://chromium-review.googlesource.com/1146100
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54656}
2018-07-24 15:58:46 +00:00
Michael Starzinger
131fb7248a [wasm] Remove Isolate from module decoder entry points.
R=ahaas@chromium.org

Change-Id: I7c6fd17f36d33451ce7605e74002515295c7ad1c
Reviewed-on: https://chromium-review.googlesource.com/1145195
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54629}
2018-07-24 08:59:32 +00:00
Sigurd Schneider
039c18e19a Speculatively revert "[turboassembler] Introduce hard-abort mode"
This reverts commit a462a7854a.

Reason for revert: Breaks a TurboAssembler test:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Arm/7726

Original change's description:
> [turboassembler] Introduce hard-abort mode
> 
> For checks and assertions (mostly for debug code, like stack alignment
> or zero extension), we had two modes: Emit a call to the {Abort}
> runtime function (the default), and emit a debug break (used for
> testing, enabled via --trap-on-abort).
> In wasm, where we cannot just call a runtime function because code must
> be isolate independent, we always used the trap-on-abort behaviour.
> This causes problems for our fuzzers, which do not catch SIGTRAP, and
> hence do not detect debug code failures.
> 
> This CL introduces a third mode ("hard abort"), which calls a C
> function via {ExternalReference}. The C function still outputs the
> abort reason, but does not print the stack trace. It then aborts via
> "OS::Abort", just like the runtime function.
> This will allow fuzzers to detect the crash and even find a nice error
> message.
> 
> Even though this looks like a lot of code churn, it is actually not.
> Most added lines are new tests, and other changes are minimal.
> 
> R=​mstarzinger@chromium.org
> 
> Bug: chromium:863799
> Change-Id: I77c58ff72db552d49014614436259ccfb49ba87b
> Reviewed-on: https://chromium-review.googlesource.com/1142163
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#54592}

TBR=mstarzinger@chromium.org,clemensh@chromium.org

Change-Id: I60c011cfe262ccebbb9abf32699a9fe17e72a3c8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:863799
Reviewed-on: https://chromium-review.googlesource.com/1145431
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54597}
2018-07-20 17:28:49 +00:00
Clemens Hammacher
a462a7854a [turboassembler] Introduce hard-abort mode
For checks and assertions (mostly for debug code, like stack alignment
or zero extension), we had two modes: Emit a call to the {Abort}
runtime function (the default), and emit a debug break (used for
testing, enabled via --trap-on-abort).
In wasm, where we cannot just call a runtime function because code must
be isolate independent, we always used the trap-on-abort behaviour.
This causes problems for our fuzzers, which do not catch SIGTRAP, and
hence do not detect debug code failures.

This CL introduces a third mode ("hard abort"), which calls a C
function via {ExternalReference}. The C function still outputs the
abort reason, but does not print the stack trace. It then aborts via
"OS::Abort", just like the runtime function.
This will allow fuzzers to detect the crash and even find a nice error
message.

Even though this looks like a lot of code churn, it is actually not.
Most added lines are new tests, and other changes are minimal.

R=mstarzinger@chromium.org

Bug: chromium:863799
Change-Id: I77c58ff72db552d49014614436259ccfb49ba87b
Reviewed-on: https://chromium-review.googlesource.com/1142163
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54592}
2018-07-20 14:44:29 +00:00
Dan Elphick
1b0d4a151a [explicit isolates] Remove GetIsolates from Map
This removes several GetIsolate calls from Map:: methods and instead
passes the Isolate in. This is a very noisy change but mostly it is just
adding Isolate to method declarations and forwarding it on.

Bug: v8:7786
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I159505e50a9462d01066f14da0fcc29762bd5531
Reviewed-on: https://chromium-review.googlesource.com/1075267
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Dan Elphick <delphick@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53826}
2018-06-19 09:59:58 +00:00
Clemens Hammacher
6be6ec0091 [wasm] Store WasmModule in shared_ptr during async compilation
We currently store the {WasmModule} (generated during decoding) in a
unique_ptr and pass ownership to the {WasmModuleObject} after
compilation.
I plan to move the {Managed<NativeModule>} from {WasmCompiledModule} to
{WasmModuleObject}, which will force us to create the
{WasmModuleObject} *before* compilation, so that the {CompilationState}
is available during compilation.

This CL prepares that refactoring by storing the {WasmModule} in a
{shared_ptr} in the {AsyncCompileJob}. Note that it will eventually be
stored in a {shared_ptr} in the {Managed} anyway.

R=titzer@chromium.org

Change-Id: Iac5e3c1067af2801e938f77a455a68807801526a
Reviewed-on: https://chromium-review.googlesource.com/1104117
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53801}
2018-06-18 15:10:03 +00:00
Andreas Haas
6380476c71 [wasm] Make wasm::ValueType independent of the MachineRepresentation
R=clemensh@chromium.org
CC=​titzer@chromium.org

Change-Id: I4951bf7ffc8baf51225e7bef60349186811b9f76
Reviewed-on: https://chromium-review.googlesource.com/1024037
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53020}
2018-05-07 11:54:56 +00:00
Marja Hölttä
98eebe1c8d [iwyu] Wasm iwyu.
BUG=v8:7490,v8:7570

Change-Id: I74fa43a747b0d399c700acc43eb82e15ea90ba16
Reviewed-on: https://chromium-review.googlesource.com/1032736
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52876}
2018-04-30 08:13:51 +00:00
Andreas Haas
3a56441a8c [wasm][cleanup] Move ValueType into its own header file
This CL splits the definition of ValueType and its helper functions
into its own header file.

R=clemensh@chromium.org

Bug: v8:7570
Change-Id: I3aa776edb45839d7d38836e131df45732c685310
Reviewed-on: https://chromium-review.googlesource.com/1021810
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52758}
2018-04-24 13:55:18 +00:00
Ben L. Titzer
a6d974fe00 [wasm] Merge the WasmContext into WasmInstanceObject
This change makes lifetime management of WasmCode much simpler.
By using the WasmInstanceObject as the context for WASM code execution,
including the pointer to the memory base and indirect function tables,
this keeps the instance alive when WASM code is on the stack, since
the instance object is passed as a parameter and spilled onto the stack.
This is in preparation of sharing the code between instances and
isolates.

Bug: v8:7424

R=mstarzinger@chromium.org

Change-Id: Ia35a3ce91a8f6135767fa764e185cde8bbc889f4
Reviewed-on: https://chromium-review.googlesource.com/997932
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52436}
2018-04-06 12:13:26 +00:00
Andreas Haas
ae958346a0 [wasm][anyref] Decode anyref globals
Add support for decoding anyref globals, and some drive-by cleanups.

R=titzer@chromium.org

Bug: v8:7581
Change-Id: I3527f996a3fa1a890918a5924e951fbafa394cf2
Reviewed-on: https://chromium-review.googlesource.com/997655
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52391}
2018-04-05 12:17:41 +00:00
Ben Titzer
8adb94fc81 Revert "[wasm] Merge the WasmContext into WasmInstanceObject"
This reverts commit 57bf0bfefb.

Reason for revert: <INSERT REASONING HERE>

Original change's description:
> [wasm] Merge the WasmContext into WasmInstanceObject
> 
> This change makes lifetime management of WasmCode much simpler.
> By using the WasmInstanceObject as the context for WASM code execution,
> including the pointer to the memory base and indirect function tables,
> this keeps the instance alive when WASM code is on the stack, since
> the instance object is passed as a parameter and spilled onto the stack.
> This is in preparation of sharing the code between instances and
> isolates.
> 
> Bug: v8:7424
> 
> Change-Id: Ic2e4b7bcc2feb20001d0553a615a8a9dff36317e
> Reviewed-on: https://chromium-review.googlesource.com/958520
> Commit-Queue: Ben Titzer <titzer@chromium.org>
> Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#52361}

TBR=mstarzinger@chromium.org,titzer@chromium.org,ahaas@chromium.org,clemensh@chromium.org

Change-Id: I653e27b46dbc43ad773eda4292d521a508f42d79
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7424
Reviewed-on: https://chromium-review.googlesource.com/995418
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52364}
2018-04-04 17:08:02 +00:00
Ben L. Titzer
57bf0bfefb [wasm] Merge the WasmContext into WasmInstanceObject
This change makes lifetime management of WasmCode much simpler.
By using the WasmInstanceObject as the context for WASM code execution,
including the pointer to the memory base and indirect function tables,
this keeps the instance alive when WASM code is on the stack, since
the instance object is passed as a parameter and spilled onto the stack.
This is in preparation of sharing the code between instances and
isolates.

Bug: v8:7424

Change-Id: Ic2e4b7bcc2feb20001d0553a615a8a9dff36317e
Reviewed-on: https://chromium-review.googlesource.com/958520
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52361}
2018-04-04 16:34:50 +00:00
Andreas Haas
68b4026c20 [wasm][anyref] Implement decoding of new instructions
R=titzer@chromium.org

Bug: v8:7581
Change-Id: I66bf50bc1243cb5e4b9f2693febf91f74077a2f4
Reviewed-on: https://chromium-review.googlesource.com/978002
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52176}
2018-03-23 12:21:58 +00:00
Karl Schimpf
7f981c6c21 [wasm] Add remaining saturating conversions
Adds the remaining saturating float to int conversion opcodes.

Bug: v8:7226
Change-Id: If84e564a7816eb4aedbc336f5c2e614da22bb10a
Reviewed-on: https://chromium-review.googlesource.com/905472
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51157}
2018-02-07 19:45:39 +00:00
Karl Schimpf
ef98172d5d [wasm] Implement i64.trunc_s:sat/f32
Implements the saturating opcode i64.trunc_s:sat/f32.

Also does some refactoring of the i32 saturating opcodes use a simplier
solution (calling a single method to handle all i32 values).

Also refactors code so that the remaining i64 saturating conversions
should be easy to add to the wasm compiler.

Bug: v8:7226
Change-Id: I031aca1e059b4baa989a56ecbc16941f591ff9b3
Reviewed-on: https://chromium-review.googlesource.com/887333
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51001}
2018-01-31 15:35:13 +00:00
Deepti Gandluri
1abeb5a3b1 [wasm] Implement wasm sign extension opcodes
- Shift opcode numbers for asmjs-compat opcodes
 - Add --experimental-wasm-se flag to gate sign extension opccodes
 - Fix codegen for ia32 movsx instructions

Bug: v8:6532
Change-Id: If7c9eff5ac76d24496effb2314ae2601bb8bba85
Reviewed-on: https://chromium-review.googlesource.com/838403
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50875}
2018-01-25 23:18:08 +00:00
Ben L. Titzer
e4d7995cfd [wasm] Move SyncCompile* and AsyncCompile* methods to WasmEngine
This is a further step to separate the implementation of the JavaScript
API from the internals of the WASM implementation. Now, wasm-js.cc
only needs to interact with the WASM engine and is (almost) independent
of module-decoder.h and module-compiler.h.

Also, move SyncCompileAndInstantiate() into wasm-module-runner.cc.

Bug: v8:7316

R=clemensh@chromium.org, mstarzinger@chromium.org

Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I7765af54ac16f53a5ff88c17a22c5d36bacaf926
Reviewed-on: https://chromium-review.googlesource.com/870871
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50679}
2018-01-18 13:27:46 +00:00
Karl Schimpf
1607614a91 [wasm] Add more saturating float to int conversions
Adds I32UConvertF32, I32SConvertF64, and I32UConvertF64 instructions.

Refactors code to use templates where appropriate, and to use
previously committed template function is_inbounds() when appropriate
in tests.

Bug: v8:7226
Change-Id: I2701e5fd0b21cefa1f285677f20616cfde29ab0d
Reviewed-on: https://chromium-review.googlesource.com/862609
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50632}
2018-01-16 21:47:08 +00:00
Ben L. Titzer
3a79d5bcc5 [wasm] Move (almost all) constants to wasm-constants.h
This CL centralizes constants related to decoding from several places
into one place and makes it no longer necessary to include
wasm-opcodes.h for some simple constants.

R=clemensh@chromium.org

Bug: 
Change-Id: I53aa81e34167df467bc7455b717bf67083033943
Reviewed-on: https://chromium-review.googlesource.com/859764
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50503}
2018-01-11 12:25:54 +00:00
Karl Schimpf
013e86b838 Add saturating f32 to i32 conversion to WASM
This CL adds the i32.trunc_s:sat/f32 WASM opcode to the turbofan
compiler and interpreter (more saturating operators will be added in
later CLs).

The operatation has been added under an experimental flag.

Bug: v8:7226
Change-Id: Ia69e981ffddb2da682e53ba25f489fc9d0cd2db5
Reviewed-on: https://chromium-review.googlesource.com/834670
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50311}
2017-12-27 19:27:19 +00:00
Mathias Bynens
822be9b238 Normalize casing of hexadecimal digits
This patch normalizes the casing of hexadecimal digits in escape
sequences of the form `\xNN` and integer literals of the form
`0xNNNN`.

Previously, the V8 code base used an inconsistent mixture of uppercase
and lowercase.

Google’s C++ style guide uses uppercase in its examples:
https://google.github.io/styleguide/cppguide.html#Non-ASCII_Characters

Moreover, uppercase letters more clearly stand out from the lowercase
`x` (or `u`) characters at the start, as well as lowercase letters
elsewhere in strings.

BUG=v8:7109
TBR=marja@chromium.org,titzer@chromium.org,mtrofin@chromium.org,mstarzinger@chromium.org,rossberg@chromium.org,yangguo@chromium.org,mlippautz@chromium.org
NOPRESUBMIT=true

Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel;master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I790e21c25d96ad5d95c8229724eb45d2aa9e22d6
Reviewed-on: https://chromium-review.googlesource.com/804294
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49810}
2017-12-02 01:24:40 +00:00
Andreas Haas
09323a6a17 [wasm] Use activations of the interpreter in the fuzzers
Typically the interpreter returns 0xdeadbeef to indicate an exception.
However, for stack overflows a normal exception is used. The interpreter
requires an activation, however, to deal with normal exceptions. With
this CL we start an activation before we execute the fuzzer input in the
interpreter.

R=clemensh@chromium.org

Bug: chromium:781103
Change-Id: I4fc3a18bfc2076aab9ff7d2324a3311fe222954a
Reviewed-on: https://chromium-review.googlesource.com/776835
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49545}
2017-11-21 14:49:55 +00:00
Andreas Rossberg
06061b7ddf [wasm] Support block parameters
This adds support for parameters on block, loop, if, cf the multi-value proposal at:
https://github.com/WebAssembly/multi-value/blob/master/proposals/multi-value/Overview.md

With this CL, we ssucceed on all tests in:
https://github.com/WebAssembly/multi-value/pull/2
except those involving multiple returns from functions.

R=titzer@chromium.org

Change-Id: I14a33e86450148f6aed2b8b8cc6bebb2303625c6
Reviewed-on: https://chromium-review.googlesource.com/712578
Commit-Queue: Andreas Rossberg <rossberg@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48871}
2017-10-24 11:44:26 +00:00
Andreas Rossberg
5d3dfc855d [wasm] [multival] Reland: Allow function types as block types
Only change over original: Init sig_index to 0 at
function-body-decoder-impl.h:168, to make MSAN happy on error path.

R=titzer@chromium.org

Change-Id: I9ac17215360523b656b10d2466201001b65992c0
Reviewed-on: https://chromium-review.googlesource.com/712655
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Rossberg <rossberg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48463}
2017-10-11 14:59:49 +00:00
Ben L. Titzer
b54bd06bdb [wasm] Use Handle<WasmInstanceObject> in wasm-module-runner.*
R=clemensh@chromium.org

Bug: 
Change-Id: I54e4d02cd5665d3ba3fd2e91da05599a915c0317
Reviewed-on: https://chromium-review.googlesource.com/712654
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48457}
2017-10-11 13:33:59 +00:00
Michael Achenbach
a8590f9d6c Revert "[wasm] [multival] Allow function types as block types"
This reverts commit e44fdc7067.

Reason for revert: Breaks msan:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/builds/17482

Original change's description:
> [wasm] [multival] Allow function types as block types
> 
> Changes the binary encoding of multi-return blocks to contain a function type index instead of a vector of value types.
> 
> Cf. https://github.com/WebAssembly/multi-value/blob/master/proposals/multi-value/Overview.md#binary-format
> 
> Bug: v8:6672
> Change-Id: I506d9323bfd6dba1e7a24c8590bcf5a08b68c433
> Reviewed-on: https://chromium-review.googlesource.com/599807
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Commit-Queue: Andreas Rossberg <rossberg@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48453}

TBR=titzer@chromium.org,rossberg@chromium.org

Change-Id: Ia711d16ec6bd1c0731a96d38b8661f05be71f64b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6672
Reviewed-on: https://chromium-review.googlesource.com/712634
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48455}
2017-10-11 12:50:37 +00:00
Andreas Rossberg
e44fdc7067 [wasm] [multival] Allow function types as block types
Changes the binary encoding of multi-return blocks to contain a function type index instead of a vector of value types.

Cf. https://github.com/WebAssembly/multi-value/blob/master/proposals/multi-value/Overview.md#binary-format

Bug: v8:6672
Change-Id: I506d9323bfd6dba1e7a24c8590bcf5a08b68c433
Reviewed-on: https://chromium-review.googlesource.com/599807
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Rossberg <rossberg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48453}
2017-10-11 12:21:13 +00:00
Deepti Gandluri
3dcb40c9b3 [wasm] Add disassembly for Atomic ops in wasm-text
Fix disassembly of atomic operations for the inspector.

BUG=v8:6842,v8:6532

Change-Id: I3701b55c28b10561d1726e2c0b9fe2e1b2c76b8e
Reviewed-on: https://chromium-review.googlesource.com/703468
Commit-Queue: Brad Nelson <bradnelson@chromium.org>
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Reviewed-by: Ben Smith <binji@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48324}
2017-10-05 23:00:51 +00:00
Ben L. Titzer
afb7bdc46a [wasm] Move compilation methods to module-compiler.h
Note that this also makes it possible to move several classes
into the module-compiler.cc file and inline their implementations.

This also allows removing several uses of wasm-module.h from
other places in V8 that include wasm-objects.h.

R=yangguo@chromium.org,clemensh@chromium.org,ahaas@chromium.org

Bug: 
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: I303ee2bb49dc53c951d377a1b65699c1e0e91da7
Reviewed-on: https://chromium-review.googlesource.com/687494
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48204}
2017-09-28 13:14:26 +00:00
Karl Schimpf
49106e4858 Add capability of throwing values in WASM
This is a second attempt at landing CL 644866 which was reverted by
CL 667019.

Extends the current implementation of WASM exceptions to be able to
throw exceptions with values (not just tags).

A JS typed (uint_16) array is used to hold the thrown values. This
allows all WASM types to be stored (i32, i64, f32, and f64) as well as
be inspected in JS.

The previous CL was reverted because the WASM compiler made calls to
run time functions with tagged objects, which must not be done. To fix
this, all run time calls use the thread-level isolate to hold the
exception being processed.

Bug: v8:6577
Change-Id: I4b1ef7e2847b71a2fab8e9934a0531057db9de63
Reviewed-on: https://chromium-review.googlesource.com/677056
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48148}
2017-09-25 16:58:19 +00:00
Camillo Bruni
28620d1929 Revert "Add capability of throwing values in WASM"
This reverts commit 7b5a40222e.

Reason for revert: GC stress-test failures exposed by 7742e534a8
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20GC%20Stress%20-%20custom%20snapshot/builds/15110/steps/Mjsunit/logs/exceptions


Original change's description:
> Add capability of throwing values in WASM
> 
> Extends the current implementation of WASM exceptions to be able to
> throw exceptions with values (not just tags).
> 
> An JS typed array (uint_16) is used to hold thrown values, so that the
> thrown values can be inspected in JS.
> 
> Bug: v8:6577
> Change-Id: I1007e79ceaffd64386b62562919cfbb920fc10c5
> Reviewed-on: https://chromium-review.googlesource.com/633866
> Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
> Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Eric Holk <eholk@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#48001}

TBR=bbudge@chromium.org,mtrofin@chromium.org,eholk@chromium.org,clemensh@chromium.org,kschimpf@chromium.org

# Not skipping CQ checks because original CL landed > 1 day ago.

Bug: v8:6577
Change-Id: I8f545183c2d2abb1bf4a0b3ee23379f3754ffd55
Reviewed-on: https://chromium-review.googlesource.com/667019
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Commit-Queue: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48050}
2017-09-15 20:27:39 +00:00
Karl Schimpf
7b5a40222e Add capability of throwing values in WASM
Extends the current implementation of WASM exceptions to be able to
throw exceptions with values (not just tags).

An JS typed array (uint_16) is used to hold thrown values, so that the
thrown values can be inspected in JS.

Bug: v8:6577
Change-Id: I1007e79ceaffd64386b62562919cfbb920fc10c5
Reviewed-on: https://chromium-review.googlesource.com/633866
Commit-Queue: Karl Schimpf <kschimpf@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Eric Holk <eholk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#48001}
2017-09-13 19:29:15 +00:00
Andreas Haas
d2da19c780 [wasm][fuzzer] Check 'main' export to be a function before execution
In the test case the module contained a memory which got exported by the
name 'main'. The fuzzer crashed when it tried to cast the memory to a
function to execute it. This CL checks that 'main' is a function before
doint the cast.

R=clemensh@chromium.org

Bug: chromium:763349
Change-Id: I9a21413c8038a7547f8b59057afea2870b15499a
Reviewed-on: https://chromium-review.googlesource.com/659978
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47941}
2017-09-11 11:44:19 +00:00
Clemens Hammacher
3ced15cb03 [wasm] [fuzzer] Fix segfault
Even though we were generating additional arguments with default value
in the case that the caller was not providing enough, we then passed
the original pointer, leading to potential out-of-bounds accesses.

R=ahaas@chromium.org

Bug: chromium:763294,chromium:763297
Change-Id: Id18622d0d40e0408e26a5fc6f97494b5f9e18d17
Reviewed-on: https://chromium-review.googlesource.com/657699
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47930}
2017-09-08 19:12:27 +00:00
Andreas Haas
7b53a0e010 [wasm] Avoid executing infinite loops in the wasm fuzzers
The wasm-async fuzzer uses the bytes provided by the fuzzer engine
directly as wasm module bytes, compiles them with async compilation, and
then tries to execute the "main" function of the module. This "main"
can have an infinite loop which causes a timeout in the fuzzer. With
this CL the "main" function is first executed with the interpreter. If
the execution in the interpreter finishes within 16k steps, which means
that there is no infinite loop, also the compiled code is executed.

I added the raw fuzzer input as a test case because in this case I
really want to test the fuzzer and not V8.

R=clemensh@chromium.org

Bug: chromium:761784
Change-Id: Id1fe5da0da8670ec821ab9979fdb9454dbde1162
Reviewed-on: https://chromium-review.googlesource.com/651046
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47874}
2017-09-07 12:35:45 +00:00
Ben L. Titzer
6377519f2e [asmjs] --validate-asm should not expose the WASM API.
R=mstarzinger@chromium.org

Bug: v8:6756
Change-Id: Ic748a4848f66dfcd9b8577d615669b61670e5431
Reviewed-on: https://chromium-review.googlesource.com/647757
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47799}
2017-09-04 13:31:32 +00:00
Ben L. Titzer
c35c54bb20 [wasm] Naming consistency for min/max pages and sizes in wasm-module.h
This is a pure renaming CL; no functionality changes.

R=mtrofin@chromium.org

Bug: 
Change-Id: I2f8262bdb17b9256d5b66fad56a7e51063f6f0d9
Reviewed-on: https://chromium-review.googlesource.com/610007
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47282}
2017-08-10 15:43:10 +00:00
Mircea Trofin
3f1e32b336 [wasm] Clarify source of runtime information for interpreter.
This is part of the effort to consolidate the ownership of
wasm instantiation/specialization parameters.

This change is focused solely on the interpreter part of that effort, to
verify we're not regressing performance in interpreter benchmarks.

There are two aspects being addressed:
- dataflow-wise, we always fetch the interpreter's memory view from the
runtime objects (i.e. WasmInstanceObject/WasmCompiledModule). This is
consistent with how other instance-specific information is obtained
(e.g. code, indirect functions).

- representation-wise, we do not reuse ModuleEnv/WasmInstance just for
the memory view, because it is surprising that other instance info isn't
accessed from there. 

Bug: 
Change-Id: I536fbffd8e1f142a315fa1770ba9b08319f56a8e
Reviewed-on: https://chromium-review.googlesource.com/602083
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Mircea Trofin <mtrofin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47205}
2017-08-07 18:14:23 +00:00
Clemens Hammacher
1bf5ac8cd9 [wasm] Extract WasmVal to own header and rename to WasmValue
This allows to reuse the class e.g. in the baseline compiler.

R=titzer@chromium.org

Change-Id: I7251af16e8c74f267834a9cefb676edf3c9f3a07
Reviewed-on: https://chromium-review.googlesource.com/570020
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46735}
2017-07-18 13:12:56 +00:00
Clemens Hammacher
b53141eca3 Reland "[wasm] Don't store global handles in the interpreter"
This is a reland of 5648aad553.
Previous compile error should be fixed by disabling strict aliasing
assumptions on gyp: https://chromium-review.googlesource.com/c/571806

Original change's description:
> [wasm] Don't store global handles in the interpreter
> 
> Storing global handles in the interpreter is dangerous, because the
> global handles are strong roots into the heap. The interpreter itself is
> referenced from the heap via a Managed. Hence the interpreter keeps the
> instance alive, while the instance keeps the Managed alive. So the GC
> will never collect them.
> 
> This CL refactors this to only store the handle to the instance object
> while executing in the interpreter, and clearing it when returning.
> It also removes the cache of import wrappers, as it should not be
> performance critical, but keeps lots of objects alive. If it turns out
> to be performance critical, we will have to reintroduce such a cache
> stored in the WasmDebugInfo object.
> 
> R=titzer@chromium.org
> CC=ahaas@chromium.org
> 
> Bug: chromium:610330
> Change-Id: I54b489dadc16685887c0c1a98da6fd0df5ad7cbb
> Reviewed-on: https://chromium-review.googlesource.com/567058
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#46629}

TBR=titzer@chromium.org

Bug: chromium:610330
Change-Id: Ic7836b1b1a044a89f2138f0c76f92acd3a1b2f2b
Reviewed-on: https://chromium-review.googlesource.com/570578
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46679}
2017-07-14 14:37:22 +00:00
Clemens Hammacher
199a26f735 Revert "[wasm] Don't store global handles in the interpreter"
This reverts commit 5648aad553.

Reason for revert: Compile error on mips:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Mips%20-%20builder/builds/10732

Original change's description:
> [wasm] Don't store global handles in the interpreter
> 
> Storing global handles in the interpreter is dangerous, because the
> global handles are strong roots into the heap. The interpreter itself is
> referenced from the heap via a Managed. Hence the interpreter keeps the
> instance alive, while the instance keeps the Managed alive. So the GC
> will never collect them.
> 
> This CL refactors this to only store the handle to the instance object
> while executing in the interpreter, and clearing it when returning.
> It also removes the cache of import wrappers, as it should not be
> performance critical, but keeps lots of objects alive. If it turns out
> to be performance critical, we will have to reintroduce such a cache
> stored in the WasmDebugInfo object.
> 
> R=​titzer@chromium.org
> CC=ahaas@chromium.org
> 
> Bug: chromium:610330
> Change-Id: I54b489dadc16685887c0c1a98da6fd0df5ad7cbb
> Reviewed-on: https://chromium-review.googlesource.com/567058
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#46629}

TBR=titzer@chromium.org,clemensh@chromium.org

Change-Id: Ifadfb885f937f37bb3eab4732a97f20ff40c2583
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:610330
Reviewed-on: https://chromium-review.googlesource.com/569962
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46630}
2017-07-13 11:04:36 +00:00
Clemens Hammacher
5648aad553 [wasm] Don't store global handles in the interpreter
Storing global handles in the interpreter is dangerous, because the
global handles are strong roots into the heap. The interpreter itself is
referenced from the heap via a Managed. Hence the interpreter keeps the
instance alive, while the instance keeps the Managed alive. So the GC
will never collect them.

This CL refactors this to only store the handle to the instance object
while executing in the interpreter, and clearing it when returning.
It also removes the cache of import wrappers, as it should not be
performance critical, but keeps lots of objects alive. If it turns out
to be performance critical, we will have to reintroduce such a cache
stored in the WasmDebugInfo object.

R=titzer@chromium.org
CC=ahaas@chromium.org

Bug: chromium:610330
Change-Id: I54b489dadc16685887c0c1a98da6fd0df5ad7cbb
Reviewed-on: https://chromium-review.googlesource.com/567058
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46629}
2017-07-13 10:56:34 +00:00
jgruber
14e80e5c91 Add Smi::ToInt helper method
This adds a convenience method for the common Smi to int conversion
pattern.

Bug: 
Change-Id: I7d7b171c36cfec5f6d10c60f1d9c3e06e3aed0fa
Reviewed-on: https://chromium-review.googlesource.com/563205
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Andreas Rossberg <rossberg@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46516}
2017-07-10 13:33:03 +00:00
Clemens Hammacher
d6aed4435f [wasm] Use pending exceptions consistently
In our internal code, we should only use pending exceptions. They will
be converted to scheduled exceptions on the API boundary.
Hence, the ErrorThrower just sets a pending exception; it should never
have to think about scheduled exceptions. The new
ScheduledErrorThrower inherits from ErrorThrower and reschedules any
pending exceptions in its destructor (turning them into scheduled
exceptions).
In some situations, there might already be a scheduled exception, e.g.
when calling other API methods (v8::Value::Get). In this case, the
ErrorThrower should also not set another pending exception. For the
reasons mentioned above, this can only be handled in the
ScheduledErrorThrower, which is used the API methods.

This fixes one DCHECK failure and one TODO about scheduled exceptions
if no instance can be created, because the start function throws.

R=mtrofin@chromium.org, mstarzinger@chromium.org
BUG=v8:6232,chromium:736256

Change-Id: I4905be04c565df9495de18fb26adbb5c05d193d2
Reviewed-on: https://chromium-review.googlesource.com/548641
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46314}
2017-06-29 10:23:45 +00:00
Karl Schimpf
ab52ddaa3e Fix reverted PR for making histogram timers thread safe.
Removes from CL https://codereview.chromium.org/2929853003 code to fix
histogram timers in class WasmCompilationUnit. This was done because
the CL was reverted due to errors caused by background compiles that
updated UMA histogram timers.

The goal of this CL is to reland the remaining portion of the reverted
CL.

Bug:v8:6361

Change-Id: Ic03ceb118734bd55c463a843521bcd5b09342afe
Reviewed-on: https://chromium-review.googlesource.com/550196
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Commit-Queue: Karl Schimpf <kschimpf@google.com>
Cr-Commit-Position: refs/heads/master@{#46268}
2017-06-27 20:03:12 +00:00
Michael Achenbach
f7d60ab798 Revert "Remove DCHECK for isolate->counters()"
This reverts commit ee0e295d8e.

Suspect for http://crbug.com/736676
Another dcheck fails, starting after the reverted CL, e.g.:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064%20%28dbg%29/builds/8666

BUG=chromium:736676,v8:6361
TBR=kschimpf@chromium.org,mtrofin@chromium.org
NOTRY=true
NOPRESUBMIT=true

Change-Id: I160b996a07d77f90a96864f3ae84f861f495ed42
Reviewed-on: https://chromium-review.googlesource.com/547425
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46196}
2017-06-26 06:41:57 +00:00