ThrowIfHole bytecodes were handled by introducing deopt points to check
for a hole. To avoid deopt loops a hole check protector was used to
generate control flow if there was a deopt due to a hole. However, the
normal control flow version should be as fast as the deopt version
in general. The deopt version could potentially consume less compile time
but it may not be worth the complexity added. Hence simplifying it to
only construct the control flow.
Bug: v8:6383
Change-Id: Icace11f7a6e21e64e1cebd104496e3f559bc85f7
Reviewed-on: https://chromium-review.googlesource.com/525573
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45783}
The two variants "turbofan" and "turbofan_opt" are not part of any of
the default sets of variants that run-tests.py uses. The only way to
trigger execution would be via the --variants flag directly, which our
infrastructure is not doing.
R=machenbach@chromium.org
Change-Id: Ifa58cb4a83a3760ffba73e8b40b417a845f53506
Reviewed-on: https://chromium-review.googlesource.com/526637
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45772}
This CL contains a few pieces:
- A new mechanism to create "BuiltinContinuation" checkpoints in TurboFan
graphs, which--when triggered--swizzle the values in the the FrameState to be
parameters to a typically TF-generated builtin that resumes execution to finish
the slow-case functionality.
- Continuation builtins that have special handling in the deoptimizer and their own
new frame type to ensure that the values they need to begin executing can be stashed
away and restored immediately before the builtin is called via a trampoline that runs
when the continuation builtin's frame execution resumes.
- An implementation of Array.prototype.forEach in TurboFan that can be used to
inline it. The inlined forEach implementation uses the checkpoints mechanism
described above to deopt in the middle of the forEach in the cases that optimization
invariants are violated. There is a slightly different continuation stub for each
deopt point in the forEach implementation to ensure the correct side-effects, i.e.
that the deopt of the builtin isn't programmatically observable.
Review-Url: https://codereview.chromium.org/2803853005
Cr-Commit-Position: refs/heads/master@{#45764}
This removes the test suite variant for stressing Crankshaft from the
list of supported variants. Other stress variants remain untouched.
R=machenbach@chromium.org
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: Iad236c2b80a1dea21b8be9b931e6a4e88f3ebcc5
Reviewed-on: https://chromium-review.googlesource.com/527094
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45758}
Introduces ThrowReferenceErrorIfHole / ThrowSuperNotCalledIfHole
/ ThrowSuperAlreadyCalledIfNotHole bytecodes to handle hole checks.
In the bytecode-graph builder they are handled by introducing a deopt point
instead of adding explicit control flow. JumpIfNotHole / JumpIfNotHoleConstant
bytecodes are removed since they are no longer required.
Bug: v8:4280, v8:6383
Change-Id: I58b70c556b0ffa30e41a0cd44016874c3e9c5fe1
Reviewed-on: https://chromium-review.googlesource.com/509613
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45720}
This CL updates the hook for the WebAssembly spec repository, and it
updates the WebAssembly spec tests. The WebAssembly spec tests have to
be updated manually with the tools/wasm/update-wasm-spec-tests.sh
script. Mircea, I saw that you updated the WebAssembly spec repository
last time. Can you please take a look?
UPDATE: I improved the update script slightly, and there is one
additional JS API test we fail now and have to fix eventually.
R=mtrofin@chromium.org
Change-Id: I3c0df9cee64d444147db47daa0c1936edf116173
Reviewed-on: https://chromium-review.googlesource.com/509257
Reviewed-by: Mircea Trofin <mtrofin@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45692}
Tests should instead be skipped or fixed.
Existing timeout expectations are either optimistically deleted or replaced by the SLOW keyword.
Change-Id: Ic43f52bf18d0702674c95f9263a109041a1c9cd8
Reviewed-on: https://chromium-review.googlesource.com/518122
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45552}
This patch also adds sharing of code target entries, which requires
sharing the RelocInfo for those entries as well. The disassembler
is also modified in order to print comments for the RelocInfo that
is now shared.
This improves the snapshot size for arm by about 4%.
BUG=
Review-Url: https://codereview.chromium.org/2869683004
Cr-Commit-Position: refs/heads/master@{#45497}
Only FullCodegen code ever gets flushed by code flushing. Since we are
deprecating the old pipeline, the added complexity introduced by code
flushing is no longer worth it. This CL removes it (but keeps code aging,
which is used to unlink SFIs from the compilation cache).
BUG=v8:6389,v8:6379,v8:6409
Change-Id: I90de113a101f86dbeaaf0511c61a090ef12aa365
Reviewed-on: https://chromium-review.googlesource.com/507388
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45446}
... by only looking at the handle.
This is in preparation for running code generation off the main thread.
Bug: v8:6048
Change-Id: I19b105c13278a2821a0b2395033e54abf5552a43
Reviewed-on: https://chromium-review.googlesource.com/506190
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45333}
The output of disassemblers was changed to display instruction offsets as
hexadecimal numbers instead of a decimal numbers. Reflect this change in
turbolizer.
BUG=
Review-Url: https://codereview.chromium.org/2885453002
Cr-Commit-Position: refs/heads/master@{#45315}
heap_find walks all the page of the heap and finds the references to a given
address.
NOTRY=true
Change-Id: I3271ab96d0224acf2361fe5bc4c8b0a608caf091
Reviewed-on: https://chromium-review.googlesource.com/500190
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45202}
This extension imitates user-interaction on a page by randomly clicking on
links matching a given regexp pattern.
Change-Id: I210bebf36ce6e3a3c785953010ce21528093d1af
NOTRY=true
Change-Id: I210bebf36ce6e3a3c785953010ce21528093d1af
Reviewed-on: https://chromium-review.googlesource.com/500247
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45201}
Before this fix, all existing suites would get wastefully initialized in each subprocess.
Bug: v8:6375
Change-Id: I68d961cde143754724735aecbac605852f89c7d9
Reviewed-on: https://chromium-review.googlesource.com/500187
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45188}
This reverts commit 4fa473cb75.
Reason for revert: Problems when v8 isn't located in a folder called "v8".
Original change's description:
> [test] Don't flatten testcfg globals
>
> This loads each test's testcfg.py as a unique module rather than flattening all into testcfg. Other than accessing LoadTestSuite there should be no references into testcfg files.
>
> Bug: v8:6375
> Change-Id: If863c1b35096b2589111e8091bb7d68f135da674
> Reviewed-on: https://chromium-review.googlesource.com/498807
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#45178}
TBR=jkummerow@chromium.org,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Bug: v8:6375
Change-Id: I3600b54279c0d98a39475432c5b2163f510153f0
Reviewed-on: https://chromium-review.googlesource.com/500130
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45180}
This loads each test's testcfg.py as a unique module rather than flattening all into testcfg. Other than accessing LoadTestSuite there should be no references into testcfg files.
Bug: v8:6375
Change-Id: If863c1b35096b2589111e8091bb7d68f135da674
Reviewed-on: https://chromium-review.googlesource.com/498807
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45178}
-fsanitize-coverage={edge,bb,func} are deprecated.
-fsanitize-coverage={edge,bb,func},trace-pc-guard should be used instead (edge is default).
BUG=chromium:651540
Review-Url: https://codereview.chromium.org/2860653002
Cr-Commit-Position: refs/heads/master@{#45072}
The current test/fuzzer/wasm directory is used for two things:
1) as the corpus directory for clusterfuzz
2) to test in v8 that the fuzzer runs correctly.
With the newly added files from the wasm spec tests this directory grew
quite big and adds unnecessary load on the trybots. Therefore I want to
do the following steps:
1) In this CL for V8: create a new directory for the clusterfuzz corpus
2) In chromium: use the new corpus directory
3) In v8: clean up the old directory to use it on the trybots.
R=bradnelson@chromium.orgCC=mmoroz@chromium.org
Change-Id: If690022558bb5780edf5a3649fb9745ef9c7407a
Reviewed-on: https://chromium-review.googlesource.com/490367
Commit-Queue: Brad Nelson <bradnelson@chromium.org>
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44991}
1. Replaces --crankshaft with --opt in tests.
2. Also fixes presubmit to check for --opt flag when
assertOptimized is used.
3. Updates testrunner/local/variants.py and
v8_foozie.py to use --opt flag.
This would mean, nooptimize variant means there are
no optimizations. Not even with %OptimizeFunctionOnNextCall.
Bug:v8:6325
Change-Id: I638e743d0773a6729c6b9749e2ca1e2537f12ce6
Reviewed-on: https://chromium-review.googlesource.com/490206
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44985}
Most of these suppressions were for the old asm-validator or for the old compiler pipeline. Some more are just optimistically removed.
Bug: chromium:681088, chromium:681241, chromium:681806, chromium:662840
NOTRY=true
Change-Id: I4c6851a72d22070026eeaca90ad3394cfce10f90
Reviewed-on: https://chromium-review.googlesource.com/488641
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44942}
I moved the wasm update scripts from tools/ to tools/wasm. In addition
I cleaned up the scripts a bit.
R=machenbach@chromium.org
Change-Id: I545dd556712e272e6509b78e343e9063346abe56
Reviewed-on: https://chromium-review.googlesource.com/488601
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44940}
The spec tests are stored on a mirror and are downloaded with the DEPS
file. The test files on the mirror are updated with a script which has
to be executed manually.
This CL contains the following changes:
* A script which updates the spec tests and uploads the generated files
to the mirror.
* Changes to the DEPS file to download the files from the mirror.
* Changes so that tools/run-tests.py can run the spec tests.
R=machenbach@chromium.org, rossberg@chromium.org
Change-Id: Ia50d09bb1501c0c0f1d1506aa3657a3aa69c2864
Reviewed-on: https://chromium-review.googlesource.com/488083
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44933}
Reason for revert:
Seems to lead to more (completely) misattributed ticks
Original issue's description:
> [tickprocessor] Consider top of the stack as pc if it points to a code object.
>
> Previously, we would only consider it if it pointed to a full-code JS function.
> Thus we could miss both optimized functions and bytecode handlers if they
> called frame-less code.
>
> Review-Url: https://codereview.chromium.org/2822433002
> Cr-Commit-Position: refs/heads/master@{#44640}
> Committed: 4433ac299eTBR=jarin@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
Review-Url: https://codereview.chromium.org/2844053003
Cr-Commit-Position: refs/heads/master@{#44921}
This is a highly requested feature!
Bug: v8:6276
Change-Id: I17b606ae0ff8fa9dfdd0fa74fd1f7ad0dd3fc4f8
Reviewed-on: https://chromium-review.googlesource.com/488044
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44916}
Traditionally, we had a prefix for a function name of "~" for
unoptimized code and "*" for optimized code. Restore this prefix
in v8/tools/ic-processor. It's really cool to know if an IC was
called from optimized code (often a hint of poor performance!).
NOTRY=true
R=cbruni@chromium.org
Review-Url: https://codereview.chromium.org/2835923004
Cr-Commit-Position: refs/heads/master@{#44846}
The data produced by the preparser scope analysis might be large.
ByteArrays are already allowed in the large object space.
This fixes mjsunit/asm/poppler/poppler.js with the flag on.
First version landed as https://chromium-review.googlesource.com/c/484459/
this version includes gen-postmortem-metadata fixes.
BUG=v8:5516
Change-Id: I2218c4729ba9feefd6595a93e5cc6d2e52ebda0e
Reviewed-on: https://chromium-review.googlesource.com/486641
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44835}
I think the WebAssembly format changed since the last time we updated
the corpus.
R=bradnelson@chromium.org
Change-Id: Ic4e24bade8cffbd43025d0961b805757a5e6f4d6
Reviewed-on: https://chromium-review.googlesource.com/485801
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44832}
- Split out code for Intl objects into src/objects/
- Rename i18n to intl (except for the name of the build flag)
- Use build system more broadly to turn on/off Intl code
- Delete a little bit of dead code
Bug: v8:5751
Change-Id: I41bf2825a5cb0df20824922b17c24cae637984da
Reviewed-on: https://chromium-review.googlesource.com/481284
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Daniel Ehrenberg <littledan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44801}
This file is never updated, I think we don't use
it - or we are using a Chromium
revision from 2013 as baseline.
Bug:
Change-Id: I82496d04cfa7c19e8c44ce9d9d2fa914e0c0d706
Reviewed-on: https://chromium-review.googlesource.com/485600
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Franziska Hinkelmann <franzih@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44789}
- Migrate make grokdump to GYP and GN
- Move code from d8 into stand-alone execution
- Add test case to ensure it's up-to-date
Review-Url: https://codereview.chromium.org/2809653003
Cr-Commit-Position: refs/heads/master@{#44687}
This adds a new "ignition_asm" configuration for the correctness fuzzer.
It is intended to compare execution behavior of asm.js modules (either
valid or invalid) that are translated to WASM, against baseline Ignition
execution. There should be no observable difference between these two
configurations.
R=machenbach@chromium.org
BUG=v8:6127
NOTRY=true
Change-Id: Id3bf8ef8251bf60391876d560f35ddd89818898f
Reviewed-on: https://chromium-review.googlesource.com/479653
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44686}
Previously, we would only consider it if it pointed to a full-code JS function.
Thus we could miss both optimized functions and bytecode handlers if they
called frame-less code.
Review-Url: https://codereview.chromium.org/2822433002
Cr-Commit-Position: refs/heads/master@{#44640}
gdb_index is not in declare_args() and has no effect.
NOTRY=true
Change-Id: I88a9558937aa8fea30ab246899bea4a123947f82
Reviewed-on: https://chromium-review.googlesource.com/475772
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44620}
- support new v8.log-based source
- fix function name resolution from v8.log
- simplify displaying and add direct links to source files
Change-Id: Ice1acdd9ebaefb27387fecc5446b973bf323dbcc
NOTRY=true
Change-Id: Ice1acdd9ebaefb27387fecc5446b973bf323dbcc
Reviewed-on: https://chromium-review.googlesource.com/474824
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44579}
Allowing a user handler for segv is default in GN, but not in GYP. We pass it now explicitly to make the last gyp bot temporarily happy.
TBR=vogelheim@chromium.org
Bug: chromium:710409
Change-Id: Ib997245f348481158bd8d64192ac653b60237452
Reviewed-on: https://chromium-review.googlesource.com/474147
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44578}
Reason for revert:
Reland with tests marked as off in no-i18n mode
Original issue's description:
> Revert of [date] Add ICU backend for timezone info behind a flag (patchset #17 id:320001 of https://codereview.chromium.org/2724373002/ )
>
> Reason for revert:
> Breaks noi18n:
> https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20noi18n%20-%20debug/builds/13314
>
> Original issue's description:
> > [date] Add ICU backend for timezone info behind a flag
> >
> > This patch implements a timezone backend which is based on ICU, rather
> > than operating system calls. It can be turned on by passing the
> > --icu-timezone-data flag. The goal here is to take advantage of ICU's
> > data, which is more complete than the data that some system calls expose.
> > For example, without any special code, this patch fixes the time zone
> > of Lord Howe Island to have a correct 30 minute DST offset, rather than
> > 60 minutes as the OS backends assume it to have.
> >
> > Unfortunately, the parenthized timezone name in Date.prototype.toString()
> > differs across platforms. This patch chooses the long timezone name,
> > which matches Windows behavior and might be the most intelligible, but
> > the web compatibility impact is unclear.
> >
> > BUG=v8:6031,v8:2137,v8:6076
> >
> > Review-Url: https://codereview.chromium.org/2724373002
> > Cr-Commit-Position: refs/heads/master@{#44562}
> > Committed: b213f23990
>
> TBR=ulan@chromium.org,jshin@chromium.org,jgruber@chromium.org,littledan@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:6031,v8:2137,v8:6076
>
> Review-Url: https://codereview.chromium.org/2811103002
> Cr-Commit-Position: refs/heads/master@{#44565}
> Committed: 13ad508110TBR=ulan@chromium.org,jshin@chromium.org,jgruber@chromium.org,machenbach@chromium.org
BUG=v8:6031,v8:2137,v8:6076
Review-Url: https://codereview.chromium.org/2813863002
Cr-Commit-Position: refs/heads/master@{#44575}
Reason for revert:
Breaks noi18n:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20noi18n%20-%20debug/builds/13314
Original issue's description:
> [date] Add ICU backend for timezone info behind a flag
>
> This patch implements a timezone backend which is based on ICU, rather
> than operating system calls. It can be turned on by passing the
> --icu-timezone-data flag. The goal here is to take advantage of ICU's
> data, which is more complete than the data that some system calls expose.
> For example, without any special code, this patch fixes the time zone
> of Lord Howe Island to have a correct 30 minute DST offset, rather than
> 60 minutes as the OS backends assume it to have.
>
> Unfortunately, the parenthized timezone name in Date.prototype.toString()
> differs across platforms. This patch chooses the long timezone name,
> which matches Windows behavior and might be the most intelligible, but
> the web compatibility impact is unclear.
>
> BUG=v8:6031,v8:2137,v8:6076
>
> Review-Url: https://codereview.chromium.org/2724373002
> Cr-Commit-Position: refs/heads/master@{#44562}
> Committed: b213f23990TBR=ulan@chromium.org,jshin@chromium.org,jgruber@chromium.org,littledan@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:6031,v8:2137,v8:6076
Review-Url: https://codereview.chromium.org/2811103002
Cr-Commit-Position: refs/heads/master@{#44565}
This patch implements a timezone backend which is based on ICU, rather
than operating system calls. It can be turned on by passing the
--icu-timezone-data flag. The goal here is to take advantage of ICU's
data, which is more complete than the data that some system calls expose.
For example, without any special code, this patch fixes the time zone
of Lord Howe Island to have a correct 30 minute DST offset, rather than
60 minutes as the OS backends assume it to have.
Unfortunately, the parenthized timezone name in Date.prototype.toString()
differs across platforms. This patch chooses the long timezone name,
which matches Windows behavior and might be the most intelligible, but
the web compatibility impact is unclear.
BUG=v8:6031,v8:2137,v8:6076
Review-Url: https://codereview.chromium.org/2724373002
Cr-Commit-Position: refs/heads/master@{#44562}
This was added in commit 40611, but the std::cout calls are gone so the
header is no longer needed.
Remove trailing spaces in html files rom the same commit and from other
html files in the same directory.
Review-Url: https://codereview.chromium.org/2797253009
Cr-Commit-Position: refs/heads/master@{#44535}
and out of the main library. This saves about 5% of binary size
(800KB on x64, 373KB on android_arm).
Only the GN build is supported; the GYP build is maintained working
but does not support the feature.
Previously landed as 4782bc0df8 / r44412.
BUG=v8:6055
CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_linux_nosnap_rel;
Review-Url: https://codereview.chromium.org/2760233005
Cr-Commit-Position: refs/heads/master@{#44489}
- Add long command names for better first-time experience
- Try to auto-detect the context object on the stack
- Mark free space object ranges
- Add print/p command to evaluate arbitrary python code
- Address expressions can now be arbitrary Python expression with auto
register substition
- New dso command finds possible HeapObjects on the stack/memory
- New dsa command prints PushStackTraceAndDie message and values
Change-Id: I0f178077f0ccef887aa3fdd2d2d2d732925948ea
NOTRY=true
Change-Id: I0f178077f0ccef887aa3fdd2d2d2d732925948ea
Reviewed-on: https://chromium-review.googlesource.com/468866
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44430}
Reason for revert:
I think that this CL breaks chromium compilation on windows with clang (). All other CLs in the list looks trivial and don't change test/unittest/BUILD.gn.
[42456/47924] CXX obj/v8/test/unittests/unittests/value-serializer-unittest.obj
[42457/47924] LINK unittests.exe unittests.exe.pdb
FAILED: unittests.exe unittests.exe.pdb
E:/b/depot_tools/python276_bin/python.exe ../../build/toolchain/win/tool_wrapper.py link-wrapper environment.x64 False link.exe /nologo /OUT:./unittests.exe /PDB:./unittests.exe.pdb @./unittests.exe.rsp
bitmap-unittest.obj : error LNK2019: unresolved external symbol "public: void __cdecl v8::internal::List<class v8::internal::AllocationObserver *,class v8::internal::FreeStoreAllocationPolicy>::Add(class v8::internal::AllocationObserver * const &,class v8::internal::FreeStoreAllocationPolicy)" (?Add@?$List@PEAVAllocationObserver@internal@v8@@VFreeStoreAllocationPolicy@23@@internal@v8@@QEAAXAEBQEAVAllocationObserver@23@VFreeStoreAllocationPolicy@23@@Z) referenced in function "public: virtual void __cdecl v8::internal::Space::AddAllocationObserver(class v8::internal::AllocationObserver *)" (?AddAllocationObserver@Space@internal@v8@@UEAAXPEAVAllocationObserver@23@@Z)
slot-set-unittest.obj : error LNK2001: unresolved external symbol "public: void __cdecl v8::internal::List<class v8::internal::AllocationObserver *,class v8::internal::FreeStoreAllocationPolicy>::Add(class v8::internal::AllocationObserver * const &,class v8::internal::FreeStoreAllocationPolicy)" (?Add@?$List@PEAVAllocationObserver@internal@v8@@VFreeStoreAllocationPolicy@23@@internal@v8@@QEAAXAEBQEAVAllocationObserver@23@VFreeStoreAllocationPolicy@23@@Z)
bitmap-unittest.obj : error LNK2019: unresolved external symbol "public: bool __cdecl v8::internal::List<class v8::internal::AllocationObserver *,class v8::internal::FreeStoreAllocationPolicy>::RemoveElement(class v8::internal::AllocationObserver * const &)" (?RemoveElement@?$List@PEAVAllocationObserver@internal@v8@@VFreeStoreAllocationPolicy@23@@internal@v8@@QEAA_NAEBQEAVAllocationObserver@23@@Z) referenced in function "public: virtual void __cdecl v8::internal::Space::RemoveAllocationObserver(class v8::internal::AllocationObserver *)" (?RemoveAllocationObserver@Space@internal@v8@@UEAAXPEAVAllocationObserver@23@@Z)
slot-set-unittest.obj : error LNK2001: unresolved external symbol "public: bool __cdecl v8::internal::List<class v8::internal::AllocationObserver *,class v8::internal::FreeStoreAllocationPolicy>::RemoveElement(class v8::internal::AllocationObserver * const &)" (?RemoveElement@?$List@PEAVAllocationObserver@internal@v8@@VFreeStoreAllocationPolicy@23@@internal@v8@@QEAA_NAEBQEAVAllocationObserver@23@@Z)
./unittests.exe : fatal error LNK1120: 2 unresolved externals
Original issue's description:
> [snapshot] Move builtins generation into mksnapshot
>
> and out of the main library. This saves about 5% of binary size
> (800KB on x64, 373KB on android_arm).
>
> Only the GN build is supported; the GYP build is maintained working
> but does not support the feature.
>
> BUG=v8:6055
> CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_linux_nosnap_rel;
>
> Review-Url: https://codereview.chromium.org/2760233005
> Cr-Commit-Position: refs/heads/master@{#44412}
> Committed: 4782bc0df8TBR=jgruber@chromium.org,rmcilroy@chromium.org,machenbach@chromium.org,jkummerow@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:6055
Review-Url: https://codereview.chromium.org/2803903002
Cr-Commit-Position: refs/heads/master@{#44422}
and out of the main library. This saves about 5% of binary size
(800KB on x64, 373KB on android_arm).
Only the GN build is supported; the GYP build is maintained working
but does not support the feature.
BUG=v8:6055
CQ_INCLUDE_TRYBOTS=master.tryserver.v8:v8_linux_nosnap_rel;
Review-Url: https://codereview.chromium.org/2760233005
Cr-Commit-Position: refs/heads/master@{#44412}
Minor fix: Provide a string for "%s".
R=hablich@chromium.org
Change-Id: Ibae24688c5f69e0fee5108701aa7f483117aea8c
Reviewed-on: https://chromium-review.googlesource.com/457998
Reviewed-by: Michael Hablich <hablich@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44350}
This CL adds support to parse a PushStackTraceAndDie dump on a windows
minidump:
Stack Message:
magic1: 00000000bbbbbbbb
magic2: 00000000bbbbbbbb
ptr1: 00000015f9ca78d1 T
ptr2: 0000000000000000
message start: 00000000002c58f0 S
stack_start: 00000000002cd8f0 S
All addresses within the message are annotated with the address marker to
make it easier to spot objects that are contained in the minidump.
Currently this doesn't work on OSX yet as we do not correctly push the two
magic markers on the stack.
Change-Id: I8385bb66a76bd253c4014bc7e25971d03830dd4d
Reviewed-on: https://chromium-review.googlesource.com/466007
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44339}
- Add new address markers:
T: tagged pointer in the minidump
C: address into a module in the minidump
S: pointer into the exception stack in the minidump
*: other address in the minidump
- Show ASCII decoding of address in dd
- Display potential frame markers on the exception stack:
00000032212fdae8: 0000000300000000 ........ Smi(3) EXIT frame marker
- Display relative addresses, useful to detect stack frames:
00000032212fdb68: 00000032212fdb98 S ........ [+6]=00000032212fdcb0 S
00000032212fdb70: 0000010ff5ca0a84 ........
00000032212fdb78: 000001064c1fa881 ........
00000032212fdb80: 0000016a8e52fcb1 ........
00000032212fdb88: 0000010ff5ca0981 ........
00000032212fdb90: 0000000d00000000 ........ Smi(13) INTERNAL frame marker
00000032212fdb98: 00000032212fdcb0 S ........ [+35]=00000032212fdd61 S
Change-Id: I56bd7e6723a34bcb668719246dd5ff2898224928
Reviewed-on: https://chromium-review.googlesource.com/461862
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44269}
Previously code view was set using innerHTML. This would cause problems
for html characters in the code -- in particular, '<' without a space
after it would start new HTML tags, and the code following it wouldn't
be visible.
Now, the source text is set using textContent, which doesn't parse the
value as HTML and implicitly escapes any HTML characters in the code.
Change-Id: I612a18c37bbb4da6a87063bb39d7f7123a3c4c0d
Reviewed-on: https://chromium-review.googlesource.com/461826
Reviewed-by: Daniel Clifford <danno@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44233}
- support register expression for addresses, e.g.: $r15-1
- show whether addresses are in the minidump with "*"
- show decoded Smis with dd
- dd without arguments continues printing the next words
Change-Id: I1a6a4f9f470c25eee7da1381014252e723ef5f7c
Reviewed-on: https://chromium-review.googlesource.com/461900
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44192}
A step towards removing isolate from ParseInfo.
Removing isolate from ParseInfo will make it easier to create and
execute parse tasks on background threads.
BUG=v8:6093
Change-Id: I0a3546618d01b9232014da94cf8d0f72427a0d1d
Reviewed-on: https://chromium-review.googlesource.com/458006
Commit-Queue: Wiktor Garbacz <wiktorg@google.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Daniel Vogelheim <vogelheim@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44176}
Since we no longer support the ignition-staging configuration
any longer, we can retire the three tier pipeline and the
CompileBaseline functionallity.
We still need support for JSFunction self healing due to
liveedit (which for --no-turbo might end up replacing a
forced Ignition function with a FCG function) - we can
remove this once we remove --no-turbo support.
BUG=v8:4280
Change-Id: I5482abd17785324654e022affd6bdb555b19b181
Reviewed-on: https://chromium-review.googlesource.com/452620
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44141}
The goal of this commit is to add the equivalent to gdbinit but
for lldb. I've tried to replicate the commands as close as possible
but I'm unsure about the jss command and hoping to get some feedback
on it in addition to the bta command which I'm not sure how/when this
could be used. This is probably just inexperience on my part.
The lldbinit file can be placed into a directory prefixed with dot
(.lldbinit) and the python script is currently expected to be in the
same directory. The path to the script can be changed manually if needed
as well.
NOTRY=true
Review-Url: https://codereview.chromium.org/2758373002
Cr-Commit-Position: refs/heads/master@{#44136}
This adds a --stress-validate-asm flag intended to stress test the
validator by running against every single function, independent of
whether a "use asm" directive is present. It mainly tests negative
cases because barely any function in our test corpus will be a valid
module according to the asm.js spec.
R=bradnelson@chromium.org
BUG=v8:6127
Change-Id: Id04b0440628134d4e81c9bb4d71039f940fc9a83
Reviewed-on: https://chromium-review.googlesource.com/457039
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44055}
This adds optimization and deoptimization counts to the Web UI. Also, the function timeline
now shows optimization and deoptimization marks.
Review-Url: https://codereview.chromium.org/2753543006
Cr-Commit-Position: refs/heads/master@{#44033}
It would be better to generate ctags file for specified architecture so
this CL adds a script gen-tags.py to generate architecture specific
ctags.
Usage:
$ tools/dev/gen-tags.py [<arch>...]
The example usage for 'x64' is as follows:
$ tools/dev/gen-tags.py x64
If no <arch> is given, it generates tags file for all arches:
$ tools/dev/gen-tags.py
R=yangguo@chromium.org,jochen@chromium.org,jkummerow@chromium.org,clemensh@chromium.org
NOTRY=true
Review-Url: https://codereview.chromium.org/2762903002
Cr-Commit-Position: refs/heads/master@{#44032}
Inspired by bsuite/compare-baseline.py and tools/perf-to-html.py. The main difference
from the latter is that the new script does not require json files preprocessing and it
is able to compare multiple json files at once (just like bsuite/compare-baseline.py).
This CL also makes tools/run_perf.py relative path friendly.
BUG=
Change-Id: I7be796fa920f8360703806f32767b992eec0f9c2
Reviewed-on: https://chromium-review.googlesource.com/456286
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43982}
In the tick processor, in cases where there are a lot of ticks (e.g.
long running programs), JSON.stringify could throw a range exception
because the created string is too large.
Instead of creating the entire JSON string in memory, we now write the
top-level parts of the JSON manually, writing out the ticks individually
instead of all together.
Review-Url: https://codereview.chromium.org/2754683002
Cr-Commit-Position: refs/heads/master@{#43973}
Makes disassembly jump target printing look more like the output of
objdump, for compatibility with perf's jump arrows. This includes
swapping the order of address and offset, and making the offset and line
numbers hex.
As a drive-by, print comment lines in objdump-v8 so that they can be
shown/hidden as "source" lines by perf.
Review-Url: https://codereview.chromium.org/2757263002
Cr-Commit-Position: refs/heads/master@{#43940}
Don't trash stdout with "dropped: overflow" messages (or other errors)
in the log reader, which then cause generated json files to fail to be
read by other tools.
Change-Id: Ie27639dbbee6fc9e8da0bc6901667c3a2835fbef
Reviewed-on: https://chromium-review.googlesource.com/456499
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43901}
When displaying a single function's timeline, display all its variants
(colour-coded by kind) instead of just the ones with the same code-id.
This allows us to see all optimised versions of a function, as well as
changes between optimised and unoptimised.
Drive-by -- Do some rounding to get rendering pixel-perfect.
Change-Id: I385c83b39414ac5e59208b7a25b488d6a283e2b0
NOTRY=true
Change-Id: I385c83b39414ac5e59208b7a25b488d6a283e2b0
Reviewed-on: https://chromium-review.googlesource.com/455833
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43894}
This reverts commit 58ff145ef0.
Reason for revert: the bug in git-numberer has been fixed and deployed.
Original change's description:
> [release] Temporarily disable gerrit for merge tools.
>
> BUG=chromium:698845
> NOTRY=true
> TBR=hablich@chromium.org,tandrii@chromium.org
>
> Change-Id: I970c984c5e9bd23ca3d951d13243d107fc2a2e3f
> Reviewed-on: https://chromium-review.googlesource.com/451280
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Michael Hablich <hablich@chromium.org>
> Commit-Queue: Michael Hablich <hablich@chromium.org>
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#43646}
R=machenbach@chromium.org,hablich@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
BUG=chromium:698845
Change-Id: I34b12a36c21a2d7a46eb67bce0536298a0582dd5
Reviewed-on: https://chromium-review.googlesource.com/455799
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43840}
This adds one of the release unittests to presubmit.
Different entry points for CI and CQ are required.
More tests will follow in subsequent CLs.
BUG=chromium:701296
NOTRY=true
Change-Id: Ie96fba873f77df14efb1dc54388f075c056b64a6
Reviewed-on: https://chromium-review.googlesource.com/454639
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43831}
This commit will likely capture several perf alerts from bots that hung.
All allerts might be attributable to the I+TF switch.
BUG=v8:6067
NOTRY=true
NOTREECHECKS=true
NOPRESUBMIT=true
TBR=hablich@chromium.org
Change-Id: Ie6d0dc977823f8740856904bdcf157c8b021d60b
Reviewed-on: https://chromium-review.googlesource.com/455776
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43817}
Removes the --ignition-staging flag since it is no longer used
by anything and won't be a shipping configuration. Also removes
ignition_turbo variant from testrunner, since it is now
the same as the turbofan variant.
BUG=v8:4280
Change-Id: I3b96e986879fc70b8e202fe9496334828acdd0ba
Reviewed-on: https://chromium-review.googlesource.com/452621
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43806}
Those tests do real calls to rietveld. As we're moving away from this, we can skip testing it now.
BUG=chromium:701296
NOTRY=true
TBR=hablich@chromium.org
Change-Id: I44249160f7e35d4e2fac7aeb40889a825cfc5678
Reviewed-on: https://chromium-review.googlesource.com/454040
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43774}
This is basically the minimum viable signal handler for Wasm bounds checks.
It includes the TLS check and the fine grained instructions checks. These
two checks provide most of the safety for the signal handler. Future CLs will
add code range and data range checks for more robustness.
The trap handling code and data structures are all in src/trap-handler, with
the code that actually runs in the signal handler confined to
src/trap-handler/signal-handler.cc.
This changes adds a new V8 API that the embedder should call from a signal
handler that will give V8 the chance to handle the fault first. For hosts that
do not want to implement their own signal handler, we include the option to
install a simple one. This simple handler is also used for the tests.
When a Wasm module is instantiated, information about each function is passed
to the trap handler, which is used to classify faults. These are removed during
the instance finalizer.
Several future enhancements are planned before turning this on by default.
Obviously, the additional checks will be added to MaybeHandleFault. We are
also planning to add a two-level CodeObjectData table that is grouped by
isolates to make cleanup easier and also reduce potential for contending on
a single data structure.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2371833007
Cr-Original-Original-Commit-Position: refs/heads/master@{#43523}
Committed: a5af7fe9ee
Review-Url: https://codereview.chromium.org/2371833007
Cr-Original-Commit-Position: refs/heads/master@{#43755}
Committed: 338622d7ca
Review-Url: https://codereview.chromium.org/2371833007
Cr-Commit-Position: refs/heads/master@{#43759}
Reason for revert:
ASAN breakage, such as https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20ASAN/builds/19111/steps/Check/logs/grow-memory
Original issue's description:
> [wasm] Initial signal handler
>
> This is basically the minimum viable signal handler for Wasm bounds checks.
> It includes the TLS check and the fine grained instructions checks. These
> two checks provide most of the safety for the signal handler. Future CLs will
> add code range and data range checks for more robustness.
>
> The trap handling code and data structures are all in src/trap-handler, with
> the code that actually runs in the signal handler confined to
> src/trap-handler/signal-handler.cc.
>
> This changes adds a new V8 API that the embedder should call from a signal
> handler that will give V8 the chance to handle the fault first. For hosts that
> do not want to implement their own signal handler, we include the option to
> install a simple one. This simple handler is also used for the tests.
>
> When a Wasm module is instantiated, information about each function is passed
> to the trap handler, which is used to classify faults. These are removed during
> the instance finalizer.
>
> Several future enhancements are planned before turning this on by default.
> Obviously, the additional checks will be added to MaybeHandleFault. We are
> also planning to add a two-level CodeObjectData table that is grouped by
> isolates to make cleanup easier and also reduce potential for contending on
> a single data structure.
>
> BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
>
> Review-Url: https://codereview.chromium.org/2371833007
> Cr-Original-Commit-Position: refs/heads/master@{#43523}
> Committed: a5af7fe9ee
> Review-Url: https://codereview.chromium.org/2371833007
> Cr-Commit-Position: refs/heads/master@{#43755}
> Committed: 338622d7caTBR=ahaas@chromium.org,bradnelson@google.com,hpayer@chromium.org,jochen@chromium.org,mark@chromium.org,mseaborn@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2744383002
Cr-Commit-Position: refs/heads/master@{#43757}
This is basically the minimum viable signal handler for Wasm bounds checks.
It includes the TLS check and the fine grained instructions checks. These
two checks provide most of the safety for the signal handler. Future CLs will
add code range and data range checks for more robustness.
The trap handling code and data structures are all in src/trap-handler, with
the code that actually runs in the signal handler confined to
src/trap-handler/signal-handler.cc.
This changes adds a new V8 API that the embedder should call from a signal
handler that will give V8 the chance to handle the fault first. For hosts that
do not want to implement their own signal handler, we include the option to
install a simple one. This simple handler is also used for the tests.
When a Wasm module is instantiated, information about each function is passed
to the trap handler, which is used to classify faults. These are removed during
the instance finalizer.
Several future enhancements are planned before turning this on by default.
Obviously, the additional checks will be added to MaybeHandleFault. We are
also planning to add a two-level CodeObjectData table that is grouped by
isolates to make cleanup easier and also reduce potential for contending on
a single data structure.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2371833007
Cr-Original-Commit-Position: refs/heads/master@{#43523}
Committed: a5af7fe9ee
Review-Url: https://codereview.chromium.org/2371833007
Cr-Commit-Position: refs/heads/master@{#43755}
This makes it possible to directly request testing noturbofan_stress on the command line.
BUG=chromium:682617
TBR=mstarzinger@chromium.org,mvstanton@chromium.org,rmcilroy@chromium.org
NOTRY=true
Change-Id: I6ba9a022c4ef24fb5abe6878d3f2f972e8461eb8
Reviewed-on: https://chromium-review.googlesource.com/453180
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43748}
Removing it from default variants set which will substantially increase test speed for developers.
Pure ignition is intended to be tested only on bots unless opted in.
BUG=chromium:682617
R=mstarzinger@chromium.org,mvstanton@chromium.org,rmcilroy@chromium.org
Change-Id: I98adb81951a0a2d16f52e6b34b98d3a90e178d8a
Reviewed-on: https://chromium-review.googlesource.com/452580
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43721}
Also format flags in single lines to make configs easier to read and modify.
BUG=chromium:673246
NOTRY=true
R=mstarzinger@chromium.org,titzer@chromium.org,rmcilroy@chromium.org
Change-Id: If37486c98af161467b639271b035207c3ae1077a
Reviewed-on: https://chromium-review.googlesource.com/452579
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43719}
- lower the cutoff-threshold for bottom up graphs to 1%
- show all builtins/stubs/ics by default
R=jkummerow@chromium.org
Change-Id: I522173155b817ae20a37c40ecf411f2b55d82105
Reviewed-on: https://chromium-review.googlesource.com/452482
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43717}
- lower the cutoff-threshold for bottom up graphs to 1%
- show all builtins/stubs/ics by default
R=jkummerow@chromium.org
Change-Id: I85f8c4f00c5f36407bc5d9f81bead8f39a5ef632
NOTRY=true
Change-Id: I85f8c4f00c5f36407bc5d9f81bead8f39a5ef632
Reviewed-on: https://chromium-review.googlesource.com/452300
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43704}
- supporting appending new data instead of simply replacing the current set
- fix issue when not filtering out groups on initial loading
Change-Id: I77d508e644b247fa236ea64ef919639cac6ee425
NOTRY=true
Change-Id: I77d508e644b247fa236ea64ef919639cac6ee425
Reviewed-on: https://chromium-review.googlesource.com/451276
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43685}
Adds a bar below the current timeline view which can show the time
when an individual function was on the stack. Functions in the call
stack are now clickable to show them in this view.
Sections where the function was on the stack, but not at the top, are
displayed at half height.
Review-Url: https://codereview.chromium.org/2737083003
Cr-Commit-Position: refs/heads/master@{#43673}
This requires serialized data to track the number of API-provided
external references separately.
And it flushes out a case of serialized data corruption (stored "length"
field too large) that we didn't handle without crashing.
BUG=v8:6055
Review-Url: https://codereview.chromium.org/2736923002
Cr-Commit-Position: refs/heads/master@{#43649}
The function list is now filtered by category by default, and sorting improved to break ties better.
Since the butterfly trees get massive, I had to start expanding the call trees on demand. This is implemented by keeping track of all ticks that cross given tree node (+ position where they crosses it). This seems to work quite well - in subsequent CL, I am planning to flip the bottom-up and top-down trees to use this.
Review-Url: https://codereview.chromium.org/2730293002
Cr-Commit-Position: refs/heads/master@{#43602}
The previous method was too brittle as applying a variable number of arguments to Date can be manipulated in too many ways, e.g. concat and apply semantics.
The new method shoud suffice for most cases.
BUG=chromium:698305
NOTRY=true
TBR=yangguo@chromium.org,mstarzinger@chromium.org
Change-Id: If6baf6ca8f1534c41ab8c50a5c507df89fbf0d16
Reviewed-on: https://chromium-review.googlesource.com/449653
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43601}
Adwords dominates the numbers and is flaky. Speedometer is measured elsewhere.
Perf sheriffs: This will change the numbers on the RuntimeStats benchmarks.
Change-Id: Id64863b41b95269987c95d48ce90f24cfa86b86d
Reviewed-on: https://chromium-review.googlesource.com/449674
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43598}
Later manipulation of Array.prototype.concat could lead to calling the Date constructor with empty arguments list. This let a non-mocked date slip in.
BUG=chromium:698097
NOTRY=true
TBR=yangguo@chromium.org,mstarzinger@chromium.org
Change-Id: Ib4bd97e06ea7be8c32d0057d42943f9f82ea6b5f
Reviewed-on: https://chromium-review.googlesource.com/449732
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43570}
The old proxy only mocked out constructor calls and didn't intercept function application. It also kept the original constructor property, through which non-mocked dates could be constructed again.
BUG=chromium:697870
NOTRY=true
R=mstarzinger@chromium.org,yangguo@chromium.org
Change-Id: Icb4ef22342424f95463a7a9c57fa0bb8d910ac19
Reviewed-on: https://chromium-review.googlesource.com/448564
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43569}
Reason for revert:
Breaks tree, i.e. https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20ASAN/builds/18928/steps/Check/logs/grow-memory
Original issue's description:
> [wasm] Initial signal handler
>
> This is basically the minimum viable signal handler for Wasm bounds checks.
> It includes the TLS check and the fine grained instructions checks. These
> two checks provide most of the safety for the signal handler. Future CLs will
> add code range and data range checks for more robustness.
>
> The trap handling code and data structures are all in src/trap-handler, with
> the code that actually runs in the signal handler confined to
> src/trap-handler/signal-handler.cc.
>
> This changes adds a new V8 API that the embedder should call from a signal
> handler that will give V8 the chance to handle the fault first. For hosts that
> do not want to implement their own signal handler, we include the option to
> install a simple one. This simple handler is also used for the tests.
>
> When a Wasm module is instantiated, information about each function is passed
> to the trap handler, which is used to classify faults. These are removed during
> the instance finalizer.
>
> Several future enhancements are planned before turning this on by default.
> Obviously, the additional checks will be added to MaybeHandleFault. We are
> also planning to add a two-level CodeObjectData table that is grouped by
> isolates to make cleanup easier and also reduce potential for contending on
> a single data structure.
>
> BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
>
> Review-Url: https://codereview.chromium.org/2371833007
> Cr-Commit-Position: refs/heads/master@{#43523}
> Committed: a5af7fe9eeTBR=ahaas@chromium.org,bradnelson@google.com,hpayer@chromium.org,jochen@chromium.org,mark@chromium.org,mseaborn@chromium.org,titzer@chromium.org,eholk@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2723133003
Cr-Commit-Position: refs/heads/master@{#43525}
This is basically the minimum viable signal handler for Wasm bounds checks.
It includes the TLS check and the fine grained instructions checks. These
two checks provide most of the safety for the signal handler. Future CLs will
add code range and data range checks for more robustness.
The trap handling code and data structures are all in src/trap-handler, with
the code that actually runs in the signal handler confined to
src/trap-handler/signal-handler.cc.
This changes adds a new V8 API that the embedder should call from a signal
handler that will give V8 the chance to handle the fault first. For hosts that
do not want to implement their own signal handler, we include the option to
install a simple one. This simple handler is also used for the tests.
When a Wasm module is instantiated, information about each function is passed
to the trap handler, which is used to classify faults. These are removed during
the instance finalizer.
Several future enhancements are planned before turning this on by default.
Obviously, the additional checks will be added to MaybeHandleFault. We are
also planning to add a two-level CodeObjectData table that is grouped by
isolates to make cleanup easier and also reduce potential for contending on
a single data structure.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2371833007
Cr-Commit-Position: refs/heads/master@{#43523}
Adding a full run of checkdeps to tools/presubmit.py so that we keep
checkdeps green. PRESUBMIT.py checks only incremental changes.
Temporarily disabling a check rule that's broker in the inspector,
pending owners fix.
BUG=
R=machenbach@chromium.org,dgozman@chromium.org,eholk@chromium.org
Review-Url: https://codereview.chromium.org/2705333005
Cr-Commit-Position: refs/heads/master@{#43397}
Convenience wrapper around building with gn/ninja and running tests.
Follows Makefile syntax, but is more flexible; see --help.
Pro tip: alias gm="tools/dev/gm.py"
NOTRY=true
Review-Url: https://codereview.chromium.org/2713663002
Cr-Commit-Position: refs/heads/master@{#43377}
This should make http://crbug.com/694535 quiet.
BUG=chromium:694535
NOTRY=true
TBR=mstarzinger@chromium.org,jarin@chromium.org
Change-Id: I268c810662b274b45842aa22d840330b5c984277
Reviewed-on: https://chromium-review.googlesource.com/445645
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43349}
For results processor to work, we need to maintain the assumption that the cwd is equal to the currently running benchmark directory.
NOTRY=true
TBR=clemensh@chromium.org
Change-Id: I585c301dea846194652645973470786ad43aa280
Reviewed-on: https://chromium-review.googlesource.com/444784
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43280}
Before this change, presubmit on upload/commit would miss checking status files when e.g. test files were deleted.
But the status file check in CI will enforce that all referenced test files exist.
NOTRY=true
Change-Id: I6069563a0a4e98406977dbce2ae44b299f7cd4b0
Reviewed-on: https://chromium-review.googlesource.com/443467
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43270}
This adds the possibility to specify a python script for post-processing stdout.
This also adds some system tests for testing the new feature.
NOTRY=true
Change-Id: I0383afb3e23513629508feeb639ed2dfce56b54a
Reviewed-on: https://chromium-review.googlesource.com/443449
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43257}
This upgrades to a precompiled plugin version including:
https://chromium.googlesource.com/v8/v8/+/4b0edcf7
BUG=v8:5970
TBR=clemensh@chromium.org,mstarzinger@chromium.org
Change-Id: I28ecdd568e4bc075533b3d14b7946a4a7ce5f9e0
Reviewed-on: https://chromium-review.googlesource.com/443648
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43255}
This wraps float arrays with a proxy to make raw buffer use slow paths avoiding different NAN patterns.
This also mocks out large typed arrays when passing the lenth as third constructor parameter.
BUG=chromium:691287,chromium:690898
NOTRY=true
Change-Id: Ic4295b0d8690e5209aceeda9ed93efdd580194c0
Reviewed-on: https://chromium-review.googlesource.com/441624
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43229}
This CL changes the datastructure to store live variables from a
std::bitset<256> to a std::vector<bool> to support an arbitrary number
of locals. Unfortunately, std::vector<bool> does not define |= and &=
operators, so I added them on the Environment class.
R=vegorov@chromium.org, mstarzinger@chromium.org, machenbach@chromium.org
BUG=v8:5970
Review-Url: https://codereview.chromium.org/2694103005
Cr-Commit-Position: refs/heads/master@{#43216}
The environment variables for swarming shards are leaking into the gtest runs, which read them as well and in turn skip some tests. Now we make sure those environment variables aren't passed to the subprocesses.
BUG=v8:5956
Change-Id: I9c93b1facc703a10a88e633074977743ccd24eb0
Reviewed-on: https://chromium-review.googlesource.com/441745
Reviewed-by: Andrii Shyshkalov <tandrii@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43161}
On bots we don't sort due to not being able to store the duration DB. But we should still run the tests marked as slow first.
BUG=v8:5861
Change-Id: Ifa812b3eef15f48e3d3c752c14c3f546b5dd87d1
Reviewed-on: https://chromium-review.googlesource.com/439284
Reviewed-by: Jochen Eisinger <jochen@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43057}
Tests are queued retaining the order of testing variants and test suites. This reorders the variants and suites to make sure the slowest run first.
Currently the debugger suite contains the slowest tests.
BUG=v8:5861
TBR=jochen@chromium.org,yangguo@chromium.org,jkummerow@chromium.org
Change-Id: Idae349b5e6db2540c6181f9b5e2ffb689733846e
Reviewed-on: https://chromium-review.googlesource.com/439311
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Jochen Eisinger <jochen@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43046}
Previously the runtime stats tool would only show entries which were in
the baseline version. This change adds any entries which exist in any
version to the comparison table, which would otherwise not appear anywhere
unless that version was selected as the baseline version.
NOTRY=true
Review-Url: https://codereview.chromium.org/2683863004
Cr-Commit-Position: refs/heads/master@{#43045}
Reason for revert:
False alarm, bot hiccup
Original issue's description:
> Revert of Reland: [Parse] ParseInfo owns the parsing Zone. (patchset #7 id:140001 of https://codereview.chromium.org/2632123006/ )
>
> Reason for revert:
> Speculative revert because of revert needed for https://codereview.chromium.org/2632123006
>
> Original issue's description:
> > Reland: [Parse] ParseInfo owns the parsing Zone.
> >
> > Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> > in preperation for enabling background compilation jobs for inner functions
> > share the AST in the outer-function's parse zone memory (read-only), with the
> > and zone being released when all compilation jobs have completed.
> >
> > BUG=v8:5203,v8:5215
> >
> > Review-Url: https://codereview.chromium.org/2632123006
> > Cr-Original-Commit-Position: refs/heads/master@{#42993}
> > Committed: 14fb337200
> > Review-Url: https://codereview.chromium.org/2632123006
> > Cr-Commit-Position: refs/heads/master@{#42996}
> > Committed: 9e7d5a6065
>
> TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2683733002
> Cr-Commit-Position: refs/heads/master@{#43008}
> Committed: 9fe08ec067TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2679303003
Cr-Commit-Position: refs/heads/master@{#43015}
Reason for revert:
Speculative revert because of revert needed for https://codereview.chromium.org/2632123006
Original issue's description:
> Reland: [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Original-Commit-Position: refs/heads/master@{#42993}
> Committed: 14fb337200
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42996}
> Committed: 9e7d5a6065TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2683733002
Cr-Commit-Position: refs/heads/master@{#43008}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Original-Commit-Position: refs/heads/master@{#42993}
Committed: 14fb337200
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42996}
Reason for revert:
doesn't compile on ToT
Original issue's description:
> Reland: [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42993}
> Committed: 14fb337200TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2685543003
Cr-Commit-Position: refs/heads/master@{#42994}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42993}
TypeFeedbackVectors are strongly rooted by a closure. However, in modern
JavaScript closures are created and abandoned more freely. An important
closure may not be present in the root-set at time of garbage collection,
even though we've cached optimized code and use it regularly. For
example, consider leaf functions in an event dispatching system. They may
well be "hot," but tragically non-present when we collect the heap.
Until now, we've relied on a weak root to cache the feedback vector in
this case. Since there is no way to signal intent or relative importance,
this weak root is as susceptible to clearing as any other weak root at
garbage collection time.
Meanwhile, the feedback vector has become more important. All of our
ICs store their data there. Literal and regex boilerplates are stored there.
If we lose the vector, then we not only lose optimized code built from
it, we also lose the very feedback which allowed us to create that optimized
code. Therefore it's vital to express that dependency through the root
set.
This CL does this by creating a strong link to a feedback
vector at the instantiation site of the function closure.
This instantiation site is in the code and feedback vector
of the outer closure.
BUG=v8:5456
Review-Url: https://codereview.chromium.org/2674593003
Cr-Commit-Position: refs/heads/master@{#42953}
With the old logic, a suppression shows up in the statistics independent if the test cases caused a difference or not. This doesn't give a signal if a suppression is useful. The new logic will help cleaning up suppressions that never apply.
BUG=chromium:673246
NOTRY=true
R=tandrii@chromium.orgTBR=mstarzinger@chromium.org,jarin@chromium.org
Change-Id: Iaebdac475f408f7d2649a34ccaa580c8d91e34a5
Reviewed-on: https://chromium-review.googlesource.com/437264
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Andrii Shyshkalov <tandrii@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#42932}
We don't track concurrent recompilation/optimization in RCS, disabling it will
give us a better idea of the performance of our compilers.
Change-Id: I8138b09d5f112914f7c7929e9ece6f543423fd03
Reviewed-on: https://chromium-review.googlesource.com/436404
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#42901}
This adds optional multi-architecture builds, allowing to compile
x86 and x64 in one build. The correctness fuzzer can be configured to
compare the two executables, e.g. to compare x86 to x64 run the
launcher with: --second-d8=clang_x86/d8 in an x64 build.
Configuring the executable's architecture is now simplified and
inferred from the gn build configuration.
Building for clusterfuzz has now a new canonical target that can be
used by the infrastructure (defaults to d8).
The clusterfuzz release builder is now defined to compile
multi-arch builds, which will have an effect as soon as the
infrastructure refers to the new clusterfuzz target.
BUG=chromium:673246
NOTRY=true
TBR=mstarzinger,jarin
Review-Url: https://codereview.chromium.org/2649133010
Cr-Commit-Position: refs/heads/master@{#42884}
Reason for revert:
AAAAAHHHHHHH
Original issue's description:
> [tools] Fix RegExp for ticksprocessor.
>
> Properly attribute all builtins, bytecode handlers and other stubs to
> the calling function unless --separate-ic is passed.
>
> R=jarin@chromium.org
> NOTRY=true
>
> Review-Url: https://codereview.chromium.org/2668953002
> Cr-Commit-Position: refs/heads/master@{#42849}
> Committed: 42011d2997TBR=jarin@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2664033005
Cr-Commit-Position: refs/heads/master@{#42851}
Properly attribute all builtins, bytecode handlers and other stubs to
the calling function unless --separate-ic is passed.
R=jarin@chromium.org
NOTRY=true
Review-Url: https://codereview.chromium.org/2668953002
Cr-Commit-Position: refs/heads/master@{#42849}
Previously (and still currently for some of them), post-mortem debugging
tools were using StandardFrameConstants::kContextOffset as the offset to
get the value that represents a frame's type.
However since https://codereview.chromium.org/1696043002, a new, more
general offset was introduced:
CommonFrameConstants::kContextOrFrameTypeOffset.
In order for post-mortem debugging tools to use this constant, it is
included in the generated post-mortem metadata.
R=danno@chromium.org,bmeurer@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2655553006
Cr-Commit-Position: refs/heads/master@{#42746}
This CL adds --crankshaft and --no-always-opt flags to the tests that use
assertOptimized() and assertUnoptimized() respectively.
This CL also adds presubmit checks that ensure that tests have the proper
flags set.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2653753007
Cr-Commit-Position: refs/heads/master@{#42709}
Also tidy some JS style in the file.
BUG=chromium:673246
NOTRY=true
Review-Url: https://codereview.chromium.org/2650353004
Cr-Commit-Position: refs/heads/master@{#42659}
Speculative reason for issue 684481.
BUG=chromium:684481
TBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org,
Original issue's description:
> [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203, v8:5215
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42562}
> Committed: 4b0101d369
Review-Url: https://codereview.chromium.org/2648383005
Cr-Commit-Position: refs/heads/master@{#42633}
This disables optimizations when using typed float arrays in
correctness fuzzer test cases. Otherwise, different NaN patterns
in float typed arrays might lead to different observations when
using the buffer in an int array view.
BUG=chromium:683579
NOTRY=true
TBR=Jarin, mvstanton, Igor Sheludko
Review-Url: https://codereview.chromium.org/2649923008
Cr-Commit-Position: refs/heads/master@{#42626}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Original-Commit-Position: refs/heads/master@{#42539}
Committed: 839b06b64f
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42562}
Reason for revert:
Crashes on Windows in:
CompilerDispatcherJobTest.CompileFailureToFinalize
CompilerDispatcherJobTest.ScopeChain
Original issue's description:
> [Parse] ParseInfo owns the parsing Zone.
>
> Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
> in preperation for enabling background compilation jobs for inner functions
> share the AST in the outer-function's parse zone memory (read-only), with the
> and zone being released when all compilation jobs have completed.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2632123006
> Cr-Commit-Position: refs/heads/master@{#42539}
> Committed: 839b06b64fTBR=marja@chromium.org,mstarzinger@chromium.org,ahaas@chromium.org,verwaest@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2645613008
Cr-Commit-Position: refs/heads/master@{#42542}
Moves ownership of the parsing Zone to ParseInfo with a shared_ptr. This is
in preperation for enabling background compilation jobs for inner functions
share the AST in the outer-function's parse zone memory (read-only), with the
and zone being released when all compilation jobs have completed.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2632123006
Cr-Commit-Position: refs/heads/master@{#42539}
The results are too noisy ATM. This switches off validate-asm for
default comparisons. We can add back dedicated jobs later that switch
it on.
BUG=chromium:663714
NOTRY=true
TBR=bradnelson@chromium.org,titzer@chromium.org
Review-Url: https://codereview.chromium.org/2640743004
Cr-Commit-Position: refs/heads/master@{#42467}
The new ignition config will be used as baseline comparison in new
jobs, e.g. against ignition_turbo. We'll keep --validate-asm off
in ignition_turbo for now as it is very chatty.
BUG=chromium:673246
NOTRY=true
Review-Url: https://codereview.chromium.org/2640043002
Cr-Commit-Position: refs/heads/master@{#42464}
Continuation of:
https://codereview.chromium.org/2620343005/
This removes usage of metadata files entirely. Instead we extract
the instrumentation about source files from the test cases.
This also adds extra output of the original source file in the
detailed failure text for easier debugging. The hashes alone
made it hard to reason.
BUG=chromium:673246
NOTRY=true
TBR=tandrii@chromium.org,mbarbella@chromium.org
Review-Url: https://codereview.chromium.org/2634743004
Cr-Commit-Position: refs/heads/master@{#42371}
The fuzz test cases now print the original test paths during execution.
This exploits this extra information and reports a hash of only one
original source file from the section that caused a difference.
The hash size is now limited to 3 to avoid possible duplicate
explosion, in case this doesn't work out as expected.
This prepares for patch 3 of:
https://chromereviews.googleplex.com/550337016/
BUG=chromium:673246
NOTRY=true
TBR=tandrii@chromium.org,mbarbella@chromium.org
Review-Url: https://codereview.chromium.org/2620343005
Cr-Commit-Position: refs/heads/master@{#42305}
Reason for revert:
Setting the BAD_BUILDS_CHECK env variable should
be enough. Lets revert this as the code doesn't
look particularly good. There must be another
problem still that needs investigation.
Original issue's description:
> [foozzie] Pass startup test
>
> This makes sure the harness passes when called without test case.
>
> BUG=chromium:673246
> NOTRY=true
> TBR=tandrii@chromium.org,mbarbella@chromium.org
>
> Review-Url: https://codereview.chromium.org/2623743004
> Cr-Commit-Position: refs/heads/master@{#42183}
> Committed: ede2fc1ff0TBR=tandrii@chromium.org,mbarbella@chromium.org,mmoroz@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:673246
Review-Url: https://codereview.chromium.org/2628493003
Cr-Commit-Position: refs/heads/master@{#42189}
This adds the correctness fuzzer harness files to the output
directory guarded by a gn arg.
The switch will be turned on on the builder uploading builds to
clusterfuzz.
BUG=chromium:673246
NOTRY=true
TBR=tandrii@chromium.org,jochen@chromium.org
Review-Url: https://codereview.chromium.org/2623843002
Cr-Commit-Position: refs/heads/master@{#42166}
This makes sure the metadata is found during minimization. Also renames
the test files to fit the naming pattern.
BUG=chromium:673246
NOTRY=true
TBR=tandrii@chromium.org,mbarbella@chromium.org
Review-Url: https://codereview.chromium.org/2622653002
Cr-Commit-Position: refs/heads/master@{#42150}
Downside: this adds all kinds of weird includes in the .cc files.
(See design doc linked in the bug.)
BUG=v8:5402
Review-Url: https://codereview.chromium.org/2622503002
Cr-Commit-Position: refs/heads/master@{#42140}
This patch provides improved infrastructure for developing test262 tests
together with V8. It has three parts:
- The test262 test runner is updated to look for local versions of tests
in the /test/test262/local-tests directory, which mirrors
/test/test262/data. Additional tests can be added there and are run
together with tests from upstream. Upstream tests can be locally
updated by using the same name in local-tests; if a same-named test
exists, then only the local version will be run. The local-tests
directory is in the V8 repository, unlike the contents of the data
directory, so tests can be added in the same patch as something else.
- The tool /test/test262/upstream-local-tests.sh is added to create
a patch against the test262 respository based on a patch which changes
the local-tests directory.
- The tool /test/test262/prune-local-tests.sh is added to remove
redundant local tests on a test262 roll.
See design doc:
https://docs.google.com/document/d/16bj7AIDgZLv4WOsUEzQ5NzcEN9_xo095e88Pz8FC5rA/edit
Review-Url: https://codereview.chromium.org/2611793002
Cr-Commit-Position: refs/heads/master@{#42117}
Our test infrastructure ignores missing tests which are listed in
status files. Sometimes, tests are removed and status file lines
are not updated. This patch adds a presubmit check for status
files addressing JavaScript tests to not reference missing tests.
It also cleans up existing violations.
R=machenbach
Review-Url: https://codereview.chromium.org/2610353002
Cr-Commit-Position: refs/heads/master@{#42106}
For benchmarks with multiple measurements (e.g. runtime, compile
time, generated code size), in case of error, we'd get only the
last portion of the name ("Compile"), which is ambiguous and makes
debugging dificult. This change includes the full name, e.g.
"Unity/Physics/Compile".
BUG=
Review-Url: https://codereview.chromium.org/2615623003
Cr-Commit-Position: refs/heads/master@{#42078}
Tracks background compilation of Ignition in a separate bucket from main thread
compilation. Also add some more compilation buckets for functions which can take a
significant proportion of compilation.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2577263002
Cr-Original-Commit-Position: refs/heads/master@{#42026}
Committed: b0e9116d59
Review-Url: https://codereview.chromium.org/2577263002
Cr-Commit-Position: refs/heads/master@{#42042}
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20TSAN/builds/13358
Original issue's description:
> [Compiler] Track Ignition background compilation separately in RuntimeStats.
>
> Tracks background compilation of Ignition in a separate bucket from main thread
> compilation. Also add some more compilation buckets for functions which can take a
> significant proportion of compilation.
>
> BUG=v8:5203,v8:5215
>
> Review-Url: https://codereview.chromium.org/2577263002
> Cr-Commit-Position: refs/heads/master@{#42026}
> Committed: b0e9116d59TBR=jochen@chromium.org,cbruni@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2609773003
Cr-Commit-Position: refs/heads/master@{#42031}
Tracks background compilation of Ignition in a separate bucket from main thread
compilation. Also add some more compilation buckets for functions which can take a
significant proportion of compilation.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2577263002
Cr-Commit-Position: refs/heads/master@{#42026}
This CL changes the displayed names of "Callbacks" and "Runtime" to "Blink C++"
and "V8 C++" respectively.
NOTRY=true
Review-Url: https://codereview.chromium.org/2598993002
Cr-Commit-Position: refs/heads/master@{#41920}
Initial version of the correctness fuzzer harness for manual testing
and experiments.
For automated usage, some outstanding TODOs are left in the code. E.g.
- Hash source file names in error case
- Bundle script in out directory with executables
- Some suppressions are tied to already fixed bugs. We'll keep it like that for now to test
removing those suppressions in production later.
BUG=chromium:673246
NOTRY=true
Review-Url: https://codereview.chromium.org/2578503003
Cr-Commit-Position: refs/heads/master@{#41789}
This splits branch ref creation and landing. The ref now directly uses
heads (without pending) and for landing we use depot_tools.
For simplicity, the check for existing tags is removed, as it now
is very unlikely to happen again without gnumbd.
BUG=chromium:674448
NOTRY=true
TBR=tandrii@chromium.org
Review-Url: https://codereview.chromium.org/2584523002
Cr-Commit-Position: refs/heads/master@{#41716}
