245 lines
14 KiB
Markdown
245 lines
14 KiB
Markdown
Command Line Interface for Zstandard library
|
|
============================================
|
|
|
|
Command Line Interface (CLI) can be created using the `make` command without any additional parameters.
|
|
There are however other Makefile targets that create different variations of CLI:
|
|
- `zstd` : default CLI supporting gzip-like arguments; includes dictionary builder, benchmark, and support for decompression of legacy zstd formats
|
|
- `zstd_nolegacy` : Same as `zstd` but without support for legacy zstd formats
|
|
- `zstd-small` : CLI optimized for minimal size; no dictionary builder, no benchmark, and no support for legacy zstd formats
|
|
- `zstd-compress` : version of CLI which can only compress into zstd format
|
|
- `zstd-decompress` : version of CLI which can only decompress zstd format
|
|
|
|
|
|
#### Compilation variables
|
|
`zstd` scope can be altered by modifying the following `make` variables :
|
|
|
|
- __HAVE_THREAD__ : multithreading is automatically enabled when `pthread` is detected.
|
|
It's possible to disable multithread support, by setting `HAVE_THREAD=0`.
|
|
Example : `make zstd HAVE_THREAD=0`
|
|
It's also possible to force multithread support, using `HAVE_THREAD=1`.
|
|
In which case, linking stage will fail if neither `pthread` nor `windows.h` library can be found.
|
|
This is useful to ensure this feature is not silently disabled.
|
|
|
|
- __ZSTD_LEGACY_SUPPORT__ : `zstd` can decompress files compressed by older versions of `zstd`.
|
|
Starting v0.8.0, all versions of `zstd` produce frames compliant with the [specification](../doc/zstd_compression_format.md), and are therefore compatible.
|
|
But older versions (< v0.8.0) produced different, incompatible, frames.
|
|
By default, `zstd` supports decoding legacy formats >= v0.4.0 (`ZSTD_LEGACY_SUPPORT=4`).
|
|
This can be altered by modifying this compilation variable.
|
|
`ZSTD_LEGACY_SUPPORT=1` means "support all formats >= v0.1.0".
|
|
`ZSTD_LEGACY_SUPPORT=2` means "support all formats >= v0.2.0", and so on.
|
|
`ZSTD_LEGACY_SUPPORT=0` means _DO NOT_ support any legacy format.
|
|
if `ZSTD_LEGACY_SUPPORT >= 8`, it's the same as `0`, since there is no legacy format after `7`.
|
|
Note : `zstd` only supports decoding older formats, and cannot generate any legacy format.
|
|
|
|
- __HAVE_ZLIB__ : `zstd` can compress and decompress files in `.gz` format.
|
|
This is ordered through command `--format=gzip`.
|
|
Alternatively, symlinks named `gzip` or `gunzip` will mimic intended behavior.
|
|
`.gz` support is automatically enabled when `zlib` library is detected at build time.
|
|
It's possible to disable `.gz` support, by setting `HAVE_ZLIB=0`.
|
|
Example : `make zstd HAVE_ZLIB=0`
|
|
It's also possible to force compilation with zlib support, using `HAVE_ZLIB=1`.
|
|
In which case, linking stage will fail if `zlib` library cannot be found.
|
|
This is useful to prevent silent feature disabling.
|
|
|
|
- __HAVE_LZMA__ : `zstd` can compress and decompress files in `.xz` and `.lzma` formats.
|
|
This is ordered through commands `--format=xz` and `--format=lzma` respectively.
|
|
Alternatively, symlinks named `xz`, `unxz`, `lzma`, or `unlzma` will mimic intended behavior.
|
|
`.xz` and `.lzma` support is automatically enabled when `lzma` library is detected at build time.
|
|
It's possible to disable `.xz` and `.lzma` support, by setting `HAVE_LZMA=0`.
|
|
Example : `make zstd HAVE_LZMA=0`
|
|
It's also possible to force compilation with lzma support, using `HAVE_LZMA=1`.
|
|
In which case, linking stage will fail if `lzma` library cannot be found.
|
|
This is useful to prevent silent feature disabling.
|
|
|
|
- __HAVE_LZ4__ : `zstd` can compress and decompress files in `.lz4` formats.
|
|
This is ordered through commands `--format=lz4`.
|
|
Alternatively, symlinks named `lz4`, or `unlz4` will mimic intended behavior.
|
|
`.lz4` support is automatically enabled when `lz4` library is detected at build time.
|
|
It's possible to disable `.lz4` support, by setting `HAVE_LZ4=0` .
|
|
Example : `make zstd HAVE_LZ4=0`
|
|
It's also possible to force compilation with lz4 support, using `HAVE_LZ4=1`.
|
|
In which case, linking stage will fail if `lz4` library cannot be found.
|
|
This is useful to prevent silent feature disabling.
|
|
|
|
- __BACKTRACE__ : `zstd` can display a stack backtrace when execution
|
|
generates a runtime exception. By default, this feature may be
|
|
degraded/disabled on some platforms unless additional compiler directives are
|
|
applied. When triaging a runtime issue, enabling this feature can provide
|
|
more context to determine the location of the fault.
|
|
Example : `make zstd BACKTRACE=1`
|
|
|
|
|
|
#### Aggregation of parameters
|
|
CLI supports aggregation of parameters i.e. `-b1`, `-e18`, and `-i1` can be joined into `-b1e18i1`.
|
|
|
|
|
|
#### Symlink shortcuts
|
|
It's possible to invoke `zstd` through a symlink.
|
|
When the name of the symlink has a specific value, it triggers an associated behavior.
|
|
- `zstdmt` : compress using all cores available on local system.
|
|
- `zcat` : will decompress and output target file using any of the supported formats. `gzcat` and `zstdcat` are also equivalent.
|
|
- `gzip` : if zlib support is enabled, will mimic `gzip` by compressing file using `.gz` format, removing source file by default (use `--keep` to preserve). If zlib is not supported, triggers an error.
|
|
- `xz` : if lzma support is enabled, will mimic `xz` by compressing file using `.xz` format, removing source file by default (use `--keep` to preserve). If xz is not supported, triggers an error.
|
|
- `lzma` : if lzma support is enabled, will mimic `lzma` by compressing file using `.lzma` format, removing source file by default (use `--keep` to preserve). If lzma is not supported, triggers an error.
|
|
- `lz4` : if lz4 support is enabled, will mimic `lz4` by compressing file using `.lz4` format. If lz4 is not supported, triggers an error.
|
|
- `unzstd` and `unlz4` will decompress any of the supported format.
|
|
- `ungz`, `unxz` and `unlzma` will do the same, and will also remove source file by default (use `--keep` to preserve).
|
|
|
|
|
|
#### Dictionary builder in Command Line Interface
|
|
Zstd offers a training mode, which can be used to tune the algorithm for a selected
|
|
type of data, by providing it with a few samples. The result of the training is stored
|
|
in a file selected with the `-o` option (default name is `dictionary`),
|
|
which can be loaded before compression and decompression.
|
|
|
|
Using a dictionary, the compression ratio achievable on small data improves dramatically.
|
|
These compression gains are achieved while simultaneously providing faster compression and decompression speeds.
|
|
Dictionary work if there is some correlation in a family of small data (there is no universal dictionary).
|
|
Hence, deploying one dictionary per type of data will provide the greater benefits.
|
|
Dictionary gains are mostly effective in the first few KB. Then, the compression algorithm
|
|
will rely more and more on previously decoded content to compress the rest of the file.
|
|
|
|
Usage of the dictionary builder and created dictionaries with CLI:
|
|
|
|
1. Create the dictionary : `zstd --train PathToTrainingSet/* -o dictionaryName`
|
|
2. Compress with the dictionary: `zstd FILE -D dictionaryName`
|
|
3. Decompress with the dictionary: `zstd --decompress FILE.zst -D dictionaryName`
|
|
|
|
|
|
#### Benchmark in Command Line Interface
|
|
CLI includes in-memory compression benchmark module for zstd.
|
|
The benchmark is conducted using given filenames. The files are read into memory and joined together.
|
|
It makes benchmark more precise as it eliminates I/O overhead.
|
|
Multiple filenames can be supplied, as multiple parameters, with wildcards,
|
|
or names of directories can be used as parameters with `-r` option.
|
|
|
|
The benchmark measures ratio, compressed size, compression and decompression speed.
|
|
One can select compression levels starting from `-b` and ending with `-e`.
|
|
The `-i` parameter selects minimal time used for each of tested levels.
|
|
|
|
|
|
#### Usage of Command Line Interface
|
|
The full list of options can be obtained with `-h` or `-H` parameter:
|
|
```
|
|
Usage :
|
|
zstd [args] [FILE(s)] [-o file]
|
|
|
|
FILE : a filename
|
|
with no FILE, or when FILE is - , read standard input
|
|
Arguments :
|
|
-# : # compression level (1-19, default: 3)
|
|
-d : decompression
|
|
-D file: use `file` as Dictionary
|
|
-o file: result stored into `file` (only if 1 input file)
|
|
-f : overwrite output without prompting and (de)compress links
|
|
--rm : remove source file(s) after successful de/compression
|
|
-k : preserve source file(s) (default)
|
|
-h/-H : display help/long help and exit
|
|
|
|
Advanced arguments :
|
|
-V : display Version number and exit
|
|
-v : verbose mode; specify multiple times to increase verbosity
|
|
-q : suppress warnings; specify twice to suppress errors too
|
|
-c : force write to standard output, even if it is the console
|
|
-l : print information about zstd compressed files
|
|
--ultra : enable levels beyond 19, up to 22 (requires more memory)
|
|
--long : enable long distance matching (requires more memory)
|
|
--no-dictID : don't write dictID into header (dictionary compression)
|
|
--[no-]check : integrity check (default: enabled)
|
|
-r : operate recursively on directories
|
|
--format=gzip : compress files to the .gz format
|
|
--format=xz : compress files to the .xz format
|
|
--format=lzma : compress files to the .lzma format
|
|
--test : test compressed file integrity
|
|
--[no-]sparse : sparse mode (default: disabled)
|
|
-M# : Set a memory usage limit for decompression
|
|
-- : All arguments after "--" are treated as files
|
|
|
|
Dictionary builder :
|
|
--train ## : create a dictionary from a training set of files
|
|
--train-cover[=k=#,d=#,steps=#,split=#] : use the cover algorithm with optional args
|
|
--train-fastcover[=k=#,d=#,f=#,steps=#,split=#,accel=#] : use the fastcover algorithm with optional args
|
|
--train-legacy[=s=#] : use the legacy algorithm with selectivity (default: 9)
|
|
-o file : `file` is dictionary name (default: dictionary)
|
|
--maxdict=# : limit dictionary to specified size (default: 112640)
|
|
--dictID=# : force dictionary ID to specified value (default: random)
|
|
|
|
Benchmark arguments :
|
|
-b# : benchmark file(s), using # compression level (default: 3)
|
|
-e# : test all compression levels from -bX to # (default: 1)
|
|
-i# : minimum evaluation time in seconds (default: 3s)
|
|
-B# : cut file into independent blocks of size # (default: no block)
|
|
--priority=rt : set process priority to real-time
|
|
```
|
|
|
|
#### Restricted usage of Environment Variables
|
|
Using environment variables to set compression/decompression parameters has security implications. Therefore,
|
|
we intentionally restrict its usage. Currently, only `ZSTD_CLEVEL` is supported for setting compression level.
|
|
If the value of `ZSTD_CLEVEL` is not a valid integer, it will be ignored with a warning message.
|
|
Note that command line options will override corresponding environment variable settings.
|
|
|
|
#### Long distance matching mode
|
|
The long distance matching mode, enabled with `--long`, is designed to improve
|
|
the compression ratio for files with long matches at a large distance (up to the
|
|
maximum window size, `128 MiB`) while still maintaining compression speed.
|
|
|
|
Enabling this mode sets the window size to `128 MiB` and thus increases the memory
|
|
usage for both the compressor and decompressor. Performance in terms of speed is
|
|
dependent on long matches being found. Compression speed may degrade if few long
|
|
matches are found. Decompression speed usually improves when there are many long
|
|
distance matches.
|
|
|
|
Below are graphs comparing the compression speed, compression ratio, and
|
|
decompression speed with and without long distance matching on an ideal use
|
|
case: a tar of four versions of clang (versions `3.4.1`, `3.4.2`, `3.5.0`,
|
|
`3.5.1`) with a total size of `244889600 B`. This is an ideal use case as there
|
|
are many long distance matches within the maximum window size of `128 MiB` (each
|
|
version is less than `128 MiB`).
|
|
|
|
Compression Speed vs Ratio | Decompression Speed
|
|
---------------------------|---------------------
|
|
 | 
|
|
|
|
| Method | Compression ratio | Compression speed | Decompression speed |
|
|
|:-------|------------------:|-------------------------:|---------------------------:|
|
|
| `zstd -1` | `5.065` | `284.8 MB/s` | `759.3 MB/s` |
|
|
| `zstd -5` | `5.826` | `124.9 MB/s` | `674.0 MB/s` |
|
|
| `zstd -10` | `6.504` | `29.5 MB/s` | `771.3 MB/s` |
|
|
| `zstd -1 --long` | `17.426` | `220.6 MB/s` | `1638.4 MB/s` |
|
|
| `zstd -5 --long` | `19.661` | `165.5 MB/s` | `1530.6 MB/s`|
|
|
| `zstd -10 --long`| `21.949` | `75.6 MB/s` | `1632.6 MB/s`|
|
|
|
|
On this file, the compression ratio improves significantly with minimal impact
|
|
on compression speed, and the decompression speed doubles.
|
|
|
|
On the other extreme, compressing a file with few long distance matches (such as
|
|
the [Silesia compression corpus]) will likely lead to a deterioration in
|
|
compression speed (for lower levels) with minimal change in compression ratio.
|
|
|
|
The below table illustrates this on the [Silesia compression corpus].
|
|
|
|
[Silesia compression corpus]: http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
|
|
|
|
| Method | Compression ratio | Compression speed | Decompression speed |
|
|
|:-------|------------------:|------------------:|---------------------:|
|
|
| `zstd -1` | `2.878` | `231.7 MB/s` | `594.4 MB/s` |
|
|
| `zstd -1 --long` | `2.929` | `106.5 MB/s` | `517.9 MB/s` |
|
|
| `zstd -5` | `3.274` | `77.1 MB/s` | `464.2 MB/s` |
|
|
| `zstd -5 --long` | `3.319` | `51.7 MB/s` | `371.9 MB/s` |
|
|
| `zstd -10` | `3.523` | `16.4 MB/s` | `489.2 MB/s` |
|
|
| `zstd -10 --long`| `3.566` | `16.2 MB/s` | `415.7 MB/s` |
|
|
|
|
|
|
#### zstdgrep
|
|
|
|
`zstdgrep` is a utility which makes it possible to `grep` directly a `.zst` compressed file.
|
|
It's used the same way as normal `grep`, for example :
|
|
`zstdgrep pattern file.zst`
|
|
|
|
`zstdgrep` is _not_ compatible with dictionary compression.
|
|
|
|
To search into a file compressed with a dictionary,
|
|
it's necessary to decompress it using `zstd` or `zstdcat`,
|
|
and then pipe the result to `grep`. For example :
|
|
`zstdcat -D dictionary -qc -- file.zst | grep pattern`
|