Chris Robinson
5e189624b7
Add JACK to the config utility
2014-12-22 18:56:15 -08:00
Chris Robinson
b8d98dd6d0
Add an option for an increased ringbuffer size with JACK
2014-12-22 18:48:54 -08:00
Chris Robinson
7e6d0d6b4f
Fill out the JACK playback backend
...
A few notes about it:
The OpenAL device's requested buffer metrics are ignored, and instead the
device will keep one JACK-sized buffer's worth of audio prepared for JACK's
next process request.
Output is restricted to 32-bit float stereo. Part of this is because JACK
requires a buffer size that's a power of 2 (measured in samples), and the
ringbuffer requires a buffer size that's a power of 2 (measured in bytes). A
channel count of 6 (5.1) or 7 (6.1) will not work without causing a sample to
split over the edge of the ringbuffer. Additioanlly, JACK doesn't provide
information about what channel configuration a device or set of ports has, so
there's no way to know what ports 3 and up map to (even the first two ports are
unknown, but assuming stereo seems to work well enough).
There is no device latency measurement (for AL_SOFT_source_latency) due to the
non-atomicity between the ringbuffer's read size and port latency. A method is
needed to ensure the ringbuffer's read size and port latency can both be
measured between the end of a JACK update cycle (when the port latency has been
updated with the newly-retrieved audio) and the following ringbuffer read
update.
2014-12-22 13:30:35 -08:00
Chris Robinson
23197ddbc3
Add a skeleton backend for JACK
2014-12-21 15:51:16 -08:00
Chris Robinson
f2d59671b2
Add a cmake module to find JACK
2014-12-21 15:48:40 -08:00
Chris Robinson
b56d50912e
Set error if capture device fails to start
2014-12-21 12:46:04 -08:00
Chris Robinson
c2975b5f44
Trace lparam and wparam message values
2014-12-21 12:37:02 -08:00
Chris Robinson
a91bca64f8
Check the PROPVARIANT type before use
2014-12-21 12:20:31 -08:00
Chris Robinson
13092d94b7
Use VECTOR_FOR_EACH instead of a manual loop
2014-12-21 10:45:10 -08:00
Chris Robinson
28a9f0826c
Use a macro for the record thread name
2014-12-21 10:38:40 -08:00
Chris Robinson
6574fa4863
Cast to the pointer-to-type to increment the buffer
2014-12-21 09:48:36 -08:00
Chris Robinson
aa4cf99e63
Fix logging on Windows
2014-12-20 06:24:55 -08:00
Chris Robinson
abf0bd13ca
Support capture with mmdevapi
2014-12-19 15:49:37 -08:00
Chris Robinson
f300be00ae
Handle logging Unicode strings on Windows
2014-12-19 10:14:02 -08:00
Chris Robinson
7f696edf13
Set the right variable when assuming CPU extensions
2014-12-19 08:50:30 -08:00
Chris Robinson
c3a36d9b19
Do up to 256 samples at a time with multi-step loops
2014-12-18 09:23:55 -08:00
Chris Robinson
9897fca794
Inline a couple functions
2014-12-18 08:52:04 -08:00
Chris Robinson
13c2dd7115
Offset to the buffer's channel start first
2014-12-18 08:42:03 -08:00
Chris Robinson
94ad5b289f
Avoid duplicate calculations
2014-12-18 07:42:14 -08:00
Chris Robinson
6086c344dc
Assert that there's a buffer for mixing
...
For Clang's static analysis.
2014-12-17 10:57:35 -08:00
Chris Robinson
4b91d34d58
Set a couple pulse callbacks to NULL during reset, and minor cleanups
2014-12-17 10:10:28 -08:00
Chris Robinson
af193e9fb3
Don't kill pulseaudio's mixer thread if it's already killed
2014-12-17 09:47:58 -08:00
Chris Robinson
c37275efdc
Use aluVector and aluMatrix in a couple more places
2014-12-16 10:36:44 -08:00
Chris Robinson
c48a6196ad
Constify some variables
2014-12-16 09:20:35 -08:00
Chris Robinson
d2adefe063
Pass a vectory to aluMatrixVector
2014-12-16 07:42:17 -08:00
Chris Robinson
3b8f54d572
Use aluVector in some more places
2014-12-16 07:20:27 -08:00
Chris Robinson
97f6d302fe
Add explicit matrix and vector types to operate with
2014-12-16 06:29:31 -08:00
Chris Robinson
1b7c554068
Multiply samples with the cubic coeffs before transposing
...
This avoids having to transpose the cubic coefficients.
2014-12-15 17:13:31 -08:00
Chris Robinson
a0e7ad493b
Load samples with _mm_loadu_ps in the cubic SSE resamplers
2014-12-15 15:27:31 -08:00
Chris Robinson
177dd95686
Add SSE2 and SSE4.1 cubic resamplers
2014-12-15 13:58:41 -08:00
Chris Robinson
a606bbc7f1
Use a lookup table to do cubic resampling
2014-12-15 12:23:28 -08:00
Chris Robinson
4b77f4ef07
Transpose the cubic matrix op
2014-12-15 11:06:44 -08:00
Chris Robinson
e60e0761f5
Use the default channel layout in alffplay if one isn't specified
2014-12-12 06:10:23 -08:00
Chris Robinson
05529d66ae
Don't pass float literals for unsigned ints
2014-12-06 18:58:16 -08:00
Chris Robinson
3d1f1ffd7f
Fix a potential leak when opening a data file on Windows
2014-12-01 19:27:09 -08:00
Chris Robinson
0c74a14543
Remove IrSize from DirectParams
2014-11-29 03:32:25 -08:00
Chris Robinson
cf50f44f4d
Remove an unnecessary maxf()
2014-11-29 02:06:08 -08:00
Chris Robinson
6883619b14
Check mmdevice endpoint for being headphones
2014-11-27 17:43:37 -08:00
Chris Robinson
8d6d2e9a2b
Avoid unnecessary uses of ALCdevice_Lock and ALCdevice_Unlock
2014-11-27 15:27:43 -08:00
Chris Robinson
82780a703b
Set headphones when dsound reports headphones
2014-11-27 02:30:52 -08:00
Chris Robinson
1db8392344
Improve ambient gain calculations
2014-11-25 22:24:29 -08:00
Chris Robinson
bdbf6613ef
Support B-Format output with the wave file writer
2014-11-25 22:20:00 -08:00
Chris Robinson
be476b3729
Halve the gain of the Cube8 coefficients
2014-11-25 18:11:45 -08:00
Chris Robinson
0a3e11b75e
Fix reverb panning direction
2014-11-25 17:55:17 -08:00
Chris Robinson
aa231d25a7
Shorten a couple lines
2014-11-25 16:47:39 -08:00
Chris Robinson
efb5c5eecd
Use linear gain stepping
2014-11-25 02:08:48 -08:00
Chris Robinson
42ef85d3f6
Pass the step count to the Update*Stepping methods
2014-11-25 01:38:27 -08:00
Chris Robinson
70ddca33ba
Fix __ALSOFT_REVERSE_Z with non-HRTF output
2014-11-25 01:15:26 -08:00
Chris Robinson
8e6c131b36
Use a separate method to set initial HRTF coefficients
2014-11-24 22:26:42 -08:00
Chris Robinson
cbe22763ee
Require at least pulse client 0.9.16
2014-11-24 13:15:04 -08:00
