We used to use the Binding decoration for this, but this method is
hopelessly broken. If no explicit MSL resource remapping exists, we
remap automatically in a manner which should always "just work".
Older API was oriented around IDs which are not available unless you're
doing full reflection, which is awkward for certain use cases which know
their set/bindings up front.
Optimize resource bindings to be hashmap rather than doing linear seeks
all the time.
In multiple-entry-point modules, we declared builtin inputs which were
not supposed to be used for that entry point.
Fix this, by being more strict when checking which builtins to emit.
This gets rather complicated because MSL does not support OpArrayLength
natively. We need to pass down a buffer which contains buffer sizes, and
we compute the array length on-demand.
Support both discrete descriptors as well as argument buffers.
Change aux buffer to swizzle buffer.
There is no good reason to expand the aux buffer, so name it
appropriately.
Make the code cleaner by emitting a straight pointer to uint rather than
a dummy struct which only contains a single unsized array member anyways.
This will also end up being very similar to how we implement swizzle
buffers for argument buffers.
Do not use implied binding if it overflows int32_t.
Some support for subgroups is present starting in Metal 2.0 on both iOS
and macOS. macOS gains more complete support in 10.14 (Metal 2.1).
Some restrictions are present. On iOS and on macOS 10.13, the
implementation of `OpGroupNonUniformElect` is incorrect: if thread 0 has
already terminated or is not executing a conditional branch, the first
thread that *is* will falsely believe itself not to be. Unfortunately,
this operation is part of the "basic" feature set; without it, subgroups
cannot be supported at all.
The `SubgroupSize` and `SubgroupLocalInvocationId` builtins are only
available in compute shaders (and, by extension, tessellation control
shaders), despite SPIR-V making them available in all stages. This
limits the usefulness of some of the subgroup operations in fragment
shaders.
Although Metal on macOS supports some clustered, inclusive, and
exclusive operations, it does not support them all. In particular,
inclusive and exclusive min, max, and, or, and xor; as well as cluster
sizes other than 4 are not supported. If this becomes a problem, they
could be emulated, but at a significant performance cost due to the need
for non-uniform operations.
Atomics are not supported on images or texture_buffers in MSL.
Properly throw an error if OpImageTexelPointer is used (since it can
only be used for atomic operations anyways).
- Replace ostringstream with custom implementation.
~30% performance uplift on vector-shuffle-oom test.
Allocations are measurably reduced in Valgrind.
- Replace std::vector with SmallVector.
Classic malloc optimization, small vectors are backed by inline data.
~ 7-8% gain on vector-shuffle-oom on GCC 8 on Linux.
- Use an object pool for IVariant type.
We generally allocate a lot of SPIR* objects. We can amortize these
allocations neatly by pooling them.
- ~15% overall uplift on ./test_shaders.py --iterations 10000 shaders/.
We cannot deduce if OpLoad needs ArrayCopy templates early since it's
heavily context dependent, and we might only know on 3rd iteration of
the compile loop.
This is a pragmatic trick to avoid symbol collision where a project
links against SPIRV-Cross statically, while linking to other projects
which also use SPIRV-Cross statically. We can end up with very awkward
symbol collisions which can resolve themselves silently because
SPIRV-Cross is pulled in as necessary. To fix this, we must use
different symbols and embed two copies of SPIRV-Cross in this scenario,
now with different namespaces, which in turn leads to different symbols.
This adds a new C API for SPIRV-Cross which is intended to be stable,
both API and ABI wise.
The C++ API has been refactored a bit to make the C wrapper easier and
cleaner to write. Especially the vertex attribute / resource interfaces
for MSL has been rewritten to avoid taking mutable pointers into the
interface. This would be very annoying to wrap and it didn't fit well
with the rest of the C++ API to begin with. While doing this, I went
ahead and removed all the old deprecated interfaces.
The CMake build system has also seen an overhaul.
It is now possible to build static/shared/CLI separately with -D
options.
The shared library only exposes the C API, as it is the only ABI-stable
API. pkg-configs as well as CMake modules are exported and installed for
the shared library configuration.
The tessellation levels in Metal are stored as a densely-packed array of
half-precision floating point values. But, stage-in attributes in Metal
have to have offsets and strides aligned to a multiple of four, so we
can't add them individually. Luckily for us, the arrays have lengths
less than 4. So, let's use vectors for them!
Triangles get a single attribute with a `float4`, where the outer levels
are in `.xyz` and the inner levels are in `.w`. The arrays are unpacked
as though we had added the elements individually. Quads get two: a
`float4` with the outer levels and a `float2` with the inner levels.
Further, since vectors can be indexed as arrays, there's no need to
unpack them in this case.
This also saves on precious vertex attributes. Before, we were using up
to 6 of them. Now we need two at most.
Builtin attributes in SPIR-V aren't linked by location, but by their
built-in-ness. This poses a problem for MSL, since builtin inputs in
the vertex pipeline are just regular attributes. We must then assign
them locations so that they can be matched up to the attributes in the
stage input descriptor--and also to avoid duplicate attribute numbers in
tessellation evaluation shaders, where there are two different
stage-in structs, so the member index therein is no longer unique!
In SPIR-V, there are always two inner levels and four outer levels, even
if the input patch isn't a quad patch. But in MSL, due to requirements
imposed by Metal, only one inner level and three outer levels exist when
the input patch is a triangle patch. We must explicitly ignore any write
to the nonexistent second inner and fourth outer levels in this case.
This is intended to be used to support `VK_KHR_maintenance2`'s
tessellation domain origin feature. If `tess_domain_origin_lower_left`
is `true`, the `v` coordinate will be inverted with respect to the
domain. Additionally, in `Triangles` mode, the `v` and `w` coordinates
will be swapped. This is because the winding order is interpreted
differently in lower-left mode.
These are mapped to Metal's post-tessellation vertex functions. The
semantic difference is much less here, so this change should be simpler
than the previous one. There are still some hairy parts, though.
In MSL, the array of control point data is represented by a special
type, `patch_control_point<T>`, where `T` is a valid stage-input type.
This object must be embedded inside the patch-level stage input. For
this reason, I've added a new type to the type system to represent this.
On Mac, the number of input control points to the function must be
specified in the `patch()` attribute. This is optional on iOS.
SPIRV-Cross takes this from the `OutputVertices` execution mode; the
intent is that if it's not set in the shader itself, MoltenVK will set
it from the tessellation control shader. If you're translating these
offline, you'll have to update the control point count manually, since
this number must match the number that is passed to the
`drawPatches:...` family of methods.
Fixes#120.
These are transpiled to kernel functions that write the output of the
shader to three buffers: one for per-vertex varyings, one for per-patch
varyings, and one for the tessellation levels. This structure is
mandated by the way Metal works, where the tessellation factors are
supplied to the draw method in their own buffer, while the per-patch and
per-vertex varyings are supplied as though they were vertex attributes;
since they have different step rates, they must be in separate buffers.
The kernel is expected to be run in a workgroup whose size is the
greater of the number of input or output control points. It uses Metal's
support for vertex-style stage input to a compute shader to get the
input values; therefore, at least one instance must run per input point.
Meanwhile, Vulkan mandates that it run at least once per output point.
Overrunning the output array is a concern, but any values written should
either be discarded or overwritten by subsequent patches. I'm probably
going to put some slop space in the buffer when I integrate this into
MoltenVK to be on the safe side.
This is necessary to deal with indirect draws, where the draw parameters
are given in a buffer instead of passed by the CPU. For normal draws,
the draw parameters are set with Metal's `setVertexBytes:` method.
This undoes the change to add the vertex count to the aux buffer,
rendering that entire discussion largely moot. Oh well. It was a
discussion that needed to happen anyway.
In the past, SPIRV-Cross threw an error in this case because it couldn't
work out which swizzle from the auxiliary buffer needs to be passed.
Now, we pass the swizzle around with the texture object, like a combined
image-sampler and its associated sampler.
If not enough components are provided in the shader,
the shader MSL compiler throws an error rather than make components
undefined. This hurts portability, so we need to add explicit padding
here.
This is a fairly fundamental change on how IDs are handled.
It serves many purposes:
- Improve performance. We only need to iterate over IDs which are
relevant at any one time.
- Makes sure we iterate through IDs in SPIR-V module declaration order
rather than ID space. IDs don't have to be monotonically increasing,
which was an assumption SPIRV-Cross used to have. It has apparently
never been a problem until now.
- Support LUTs of structs. We do this by interleaving declaration of
constants and struct types in SPIR-V module order.
To support this, the ParsedIR interface needed to change slightly.
Before setting any ID with variant_set<T> we let ParsedIR know
that an ID with a specific type has been added. The surface for change
should be minimal.
ParsedIR will maintain a per-type list of IDs which the cross-compiler
will need to consider for later.
Instead of looping over ir.ids[] (which can be extremely large), we loop
over types now, using:
ir.for_each_typed_id<SPIRVariable>([&](uint32_t id, SPIRVariable &var) {
handle_variable(var);
});
Now we make sure that we're never looking at irrelevant types.
