`min_lod_clamp()` was actually added in MSL 2.2 on iOS 13. The
restriction was based on the beta versions which didn't have it. Since
the beta versions didn't support family 6, this leads me to suspect that
the reason they lacked `min_lod_clamp()` is that it requires family 6.
This does not seem to be documented anywhere.
`simd_is_helper_thread()` was added in MSL 2.3 to iOS. I neglected to
update this when I finished up `SPV_EXT_demote_to_helper_invocation`.
`barycentric_coord` and `primitive_id` were added in MSL 2.3 on iOS 14.
They are only supported on family 7.
New in MSL 2.3 is a template that can be used in the place of a scalar
type in a stage-in struct. This template has methods which interpolate
the varying at the given points. Curiously, you can't set interpolation
attributes on such a varying; perspective-correctness is encoded in the
type, while interpolation must be done using one of the methods. This
makes using this somewhat awkward from SPIRV-Cross, requiring us to jump
through a bunch of hoops to make this all work.
Using varyings from functions in particular is a pain point, requiring
us to pass the stage-in struct itself around. An alternative is to pass
references to the interpolants; except this will fall over badly with
composite types, which naturally must be flattened. As with
tessellation, dynamic indexing isn't supported with pull-model
interpolation. This is because of the need to reference the original
struct member in order to call one of the pull-model interpolation
methods on it. Also, this is done at the variable level; this means that
if one varying in a struct is used with the pull-model functions, then
the entire struct is emitted as pull-model interpolants.
For some reason, this was not documented in the MSL spec, though there
is a property on `MTLDevice`, `supportsPullModelInterpolation`,
indicating support for this, which *is* documented. This does not appear
to be implemented yet for AMD: it returns `NO` from
`supportsPullModelInterpolation`, and pipelines with shaders using the
templates fail to compile. It *is* implemeted for Intel. It's probably
also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to
Metal, and it wouldn't be possible to use the interpolation functions
without this implemented in Metal.
Based on my testing, where SPIR-V and GLSL have the offset relative to
the pixel center, in Metal it appears to be relative to the pixel's
upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375,
i.e. one half minus one sixteenth, to all arguments to
`interpolate_at_offset()`.
This also fixes a long-standing bug: if a pull-model interpolation
function is used on a varying, make sure that varying is declared. We
were already doing this only for the AMD pull-model function,
`interpolateAtVertexAMD()`; for reasons which are completely beyond me,
we weren't doing this for the base interpolation functions. I also note
that there are no tests for the interpolation functions for GLSL or
HLSL.
I kept the code to replace constant zero arguments, because `Bias` and
`Grad` still have some problems on desktop GPUs.
`Bias` works on AMD GPUs. `Grad` does not. Both work on Intel. Still
needs testing on NV. It will definitely work with Apple GPUs.
(GL_EXT_nonuniform_qualifier/SPV_EXT_descriptor_indexing).
MSLResourceBinding includes array size through API, and substitutes
in that size if the image or sampler array is not explicitly sized.
OpCopyObject supports SPIRCombinedImageSampler type in MSL.
Writing to buffers actually works starting in MSL 2.1 (macOS 10.14,
iOS 12). Writing to textures works starting in MSL 2.2 (macOS 10.15, iOS
13).
No tests unfortunately, because the MSL 2.2 compiler and above produce a
warning that cannot be disabled, because it has no associated option.
Metal doesn't support broadcasting or shuffling boolean values, but we
can work around that by casting it to `ushort`, then casting it back to
`bool`. I used `ushort` instead of `uint` because 16-bit values give
better throughput on Apple GPUs.
Only the least *n* bits are significant, where *n* is the subgroup size.
The Vulkan CTS actually checks this.
The `FindLSB` tests weren't actually failing, but I masked that anyway,
in case there's some corner case the CTS is missing.
`SubgroupEqMask` had a fencepost error that gave wrong values for
invocation ID 32.
For `SubgroupGeMask` and `SubgroupGtMask`, I forgot to shift the values
from `extract_bits()` up so that the mask is in the correct position.
Using `insert_bits()` instead should fold these two operations into one.
`SubgroupLtMask` and `SubgroupLeMask` were already correct.
`half` cannot be bitcasted to `float`, because the two types are not the
same size. Use an expanding cast instead.
We were already doing this for stores to the tessellation levels; why I
didn't also do this for loads is beyond me.
Fix reversed coordinates: `y` should be used to calculate the row
address. Align row address to the row stride.
I've made the row alignment a function constant; this makes it possible
to override it at pipeline compile time.
Honestly, I don't know how this worked at all for Epic. It definitely
didn't work in the CTS prior to this.
MSL 2.3 has everything needed to support this extension on all
platforms. The existing `discard_fragment()` function was given demote
semantics, similar to Direct3D, and the `simd_is_helper_thread()`
function was finally added to iOS.
I've left the old test alone. Should I remove it in favor of these?
In some cases, we need to get a literal value from a spec constant op.
Mostly relevant when emitting buffers, so implement a 32-bit integer
scalar subset of the evaluator. Can be extended as needed to support
evaluating any specialization constant operation.
These need to use arrayed texture types, or Metal will complain when
binding the resource. The target layer is addressed relative to the
Layer output by the vertex pipeline, or to the ViewIndex if in a
multiview pipeline. Unlike with the s/t coordinates, Vulkan does not
forbid non-zero layer coordinates here, though this cannot be expressed
in Vulkan GLSL.
Supporting 3D textures will require additional work. Part of the problem
is that Metal does not allow texture views to subset a 3D texture, so we
need some way to pass the base depth to the shader.
Some older iOS devices don't support layered rendering. In that case,
don't set `[[render_target_array_index]]`, because the compiler will
reject the shader in that case. The client will then have to unroll the
render pass manually.
Account for a non-zero base instance when calculating the view index and
the "real" instance index. Before, it was likely broken with a non-zero
base instance, since the calculated instance index could be less than
the base instance.
- Do not silently drop reserved identifiers in the parser. This makes it
possible to reflect identifiers which are reserved by the
cross-compiler module.
- Instead of dropping the name, emit _RESERVED_IDENTIFIER_FIXUP in the
source to make it clear that a name has been rewritten.
- Document what is reserved and not.
Prior to this point, we were treating them as flattened, as they are in
old-style tessellation control shaders, and still are for structs in
new-style shaders. This is not true for outputs; output composites are
not flattened at all. This semantic mismatch broke a Vulkan CTS test.
It should now pass.
In Metal render pipelines don't have an option to set a sampleMask
parameter, the only way to get that functionality is to set the
sample_mask output of the fragment shader to this value directly.
We also need to take care to combine the fixed sample mask with the
one that the shader might possibly output.
This should hopefully reduce underutilization of the GPU, especially on
GPUs where the thread execution width is greater than the number of
control points.
This also simplifies initialization by reading the buffer directly
instead of using Metal's vertex-attribute-in-compute support. It turns
out the only way in which shader stages are allowed to differ in their
interfaces is in the number of components per vector; the base type must
be the same. Since we are using the raw buffer instead of attributes, we
can now also emit arrays and matrices directly into the buffer, instead
of flattening them and then unpacking them. Structs are still flattened,
however; this is due to the need to handle vectors with fewer components
than were output, and I think handling this while also directly emitting
structs could get ugly.
Another advantage of this scheme is that the extra invocations needed to
read the attributes when there were more input than output points are
now no more. The number of threads per workgroup is now lcm(SIMD-size,
output control points). This should ensure we always process a whole
number of patches per workgroup.
To avoid complexity handling indices in the tessellation control shader,
I've also changed the way vertex shaders for tessellation are handled.
They are now compute kernels using Metal's support for vertex-style
stage input. This lets us always emit vertices into the buffer in order
of vertex shader execution. Now we no longer have to deal with indexing
in the tessellation control shader. This also fixes a long-standing
issue where if an index were greater than the number of vertices to
draw, the vertex shader would wind up writing outside the buffer, and
the vertex would be lost.
This is a breaking change, and I know SPIRV-Cross has other clients, so
I've hidden this behind an option for now. In the future, I want to
remove this option and make it the default.
Without this change, code such as:
```
OpStore %param_var_mipLevelSizes_0 %heightmapMipSizes
```
within a function that then forwards the value `%param_var_mipLevelSizes_0` to another function will not have `%heightmapMipSizes` registered as an argument to the function.
