Fixes#2669
* Check capabilities when validating variables
* validate load and store types
* Constant check
* Don't checks pointers for stores, constants and loads
* Validate composite instructions
* Validate conversions for 8- and 16-bit limited types
* Unified tests and expanded them
* Disallow OpCopyMemory
* new tests and update old tests
* Can only be used with Vulkan memory model
* Can only be used with atomics
* Bit setting must match for compare exchange opcodes
* Updated memory semantics checks to allow constant instructions
generally with CooperativeMatrixNV
Also add a Builtin test generator variant that takes
capabilities and extensions.
Tests
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in Vertex, Fragment, TessControl, TessEval, Geometry,
and Compute.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in MeshNV and TaskNV shaders.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in the 6 ray tracing stages
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as Outputs.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-scalar integers (f32, uvec3)
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-32-bit integers (u64)
Fixes#2604
* Allow selection constructs to branch to the nearest selection merge
whose header is terminated by an OpSwitch
* Cleanup break and continue checks generally
* add tests
It is currently not possible to use an Image Format that is
not Unknown without requiring a capability forbidden by the
OpenCL environment. As such the validation of Image Format
currently leans on capability validation entirely.
Fixes#2592.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Validate structured exits from constructs
* Add checks that exits from a construct are valid
* Add Construct::IsStructuredExit()
* uses specific rules for each type of construct
* Added a test and check for #2213
* Adding tests for bad loop and continue exits
* Fix identification of continue block that prevented some selections
from having any blocks
* Make pointers to logically matching types interchangeable with option.
DXC will be generating code where the function parameters will be a more
generic type that the actual parameter. They should be logically
matching and the decorations of the actual parameter must be a superset
of the decorations of the formal parameter.
We want to accept this code with an options so that spirv-opt can then
inline and fix the type mismatch. We will accept this under a new
options `--before-hlsl-legalization`.
The new option will also imply `relax-logical-pointer` so that HLSL
frontends will need to use just the one more generic option.
Moved the |LogicallyMatches| to the validation state to make it
available in more places. Also added a parameter to have it check the
decorations. I did not do a separate function for the decorations
because checking the decorations involves making sure the types
logically match anyway.
Fixes#2535
* Use grammar last version
Fixes#2560
* Parse last version and use it in checks
* Update grammar header generation
* Fix NonWritable tests
* Fix check and add specific tests
Fixes#2555
* Fix a bug in validation where interfaces were considered non-unique
between different entry points targeting the same function
* added a test
* Update private to local pass to remove localized private variables
from entry point interfaces
* added tests
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
Recent change to the spec restricted the valid values for Memory
Semantics in OpAtomics* in the WebGPU env. Implementing enforcing
these changes.
Fixes#2499
Fixes#2470
* Only require the *WithoutFormat capabilities for Unknown image reads
and writes in the Vulkan environment
* update tests and add new vulkan specific tests
Fixes#2488
* Validator doesn't identify back-edge of the loop, so the merge is
never set
* Construct::blocks() has safe uses of `merge` so the assert can be
removed
* Added a test
Changing the stored value for a sampled image consumer to be the
instruction instead of result ID, since not all instructions have
result IDs. Using result IDs led to a potential crash when using
OpReturnValue, which doesn't have a result ID. OpReturnValue is not a
legal consumer, but the validator needs to look at the instruction to
determine this, thus storing the pointer to the instruction, instead
of trying to fetch the pointer using the instruction.
Issue #1528 covers fixing the check.
Fixes#2463
If relax-logical-pointer is enabled, this commit makes Validator
accept function param even when its Storage Class is different from
the expected one.
Related to #2423, #2430
In WebGPU all blocks are required to be reachable, unless they are one of two
specific degenerate cases for merge-block or continue-target. This PR adds in
checking for these conditions.
Fixes#2068
In relaxed addressing mode, we want to accept non memory objects
because this is a very natural translation of hlsl. It should be fixed
by legalization by inlining the calls.
* Remove use of deprecated googletest macro
INSTANTIATE_TEST_CASE_P has been deprecated. We need to use
INSTANTIATE_TEST_SUITE_P instead.
* Remove extra commas from test suites.
This CL adds in the specific checks required for WebGPU, enables
running the builtin checks for WebGPU, and refactors the existing
testing infrastructure to support testing the new checks.
This PR is part of resolving #2276
In a recent PR, we allowed a forward reference for the element type in
an array declaration. However, we do not have other check to make sure
the forward reference is a pointer type first reference in
OpTypeForawrdPointer. We add that check.
Fixes https://crbug.com/920074.
Broader check for ids that require a type
Fixes https://crbug.com/911700
* Adds a broader check for when id operands require a type
* updated a few tests
* added a test to catch the original issue
* Added additional changes for the new AccelerationStructureNV type.
* Added NVIDIA ray tracing storage classes for checking in ValidateVariable.
* For NVIDIA ray tracing storage classes added test to load bool type (allowed) in new storage class.
There is inconsistencies between the different specs about whether or
not this capability is required/allowed, so tooling like glslang
currently ignores it. Once this is resolved the check and test can be
re-enabled.
* Only check for binding and descriptor set on variables that are
statically used by an entry point
* updated tests and added a couple new ones
* new method for collecting entry points that statically reference an
id
* Validate OpForwardPointer
The validator does not have a a check that OpForwardPointer is giving
a forward reference to a pointer type. We add that check.
https://crbug.com/910852
* Remove more specialized check.
There was a check that the forward pointer is actually a poiner type,
but it was only done if it was used in a struct. This was too specific.
Remove it in favour of the more general check that was added.
* Format
* Check the storage type in OpTypeForwardPointer
* Fix typo is test case epxected results.
Fixes#2147
* Checks that device scope is not used for availability and visibility
operations unless VulkanMemoryModelDeviceScopeKHR capability is present
* implemented for atomics, barriers and memory instructions currently
This CL changes the id/name output from the validator to always use a
consistent id[%name] style. This removes the need for getIdOrName. The
name lookup is changed to use the NameMapper so the output is consistent
with what the disassembler will produce.
Fixes#2137
* Validate uses of ids defined in unreachable blocks.
For some reason we do not make sure the uses of ids that are defined
in unreachable blocks are dominated by their def. This is causing
invalid code to pass the validator.
Fixes#2143
* Add test for unreachable code after a return.
We want to allow code like:
```
void foo() {
a = ...;
...
return; // for debugging
<use of a>;
...
}
```
I added a test to make sure that something like this is still accepted
by the validator.
* Add test for unreachable def used in phi.
Fixes#2104
* Checks the rules for logical addressing and variable pointers
* Has an out for relaxed logical pointers
* Updated PassFixture to expose validator options
* enabled relaxed logical pointers for some tests
* New validator tests
Restrict capabilities to WebGPU spec
This covers whitelisting Matrix, Shader, Sampled1D, Image1D,
DerivativeControl, and ImageQuery. These are the allowed capabilities
that don't require an extension. Whitelisting VulkanMemoryModelKHR
will be handled by whitelisting its extension in a seperate patch.
Fixes#2101
Make sure that initialized variable have correct storage class
For WebGPU and Vulkan environments, variables must have the storage
class; Output, Private, or Function, if they have an initializer.
Fixes#2071
Adding validation that the addressing declared by OpMemoryModel is
Logical and the memory model declared is VulkanKHR. Updating a bunch
of tests that were broken by this.
Fixes#2060
Check forbidden Annotation instructions for WebGPU env
From the WebGPU SPIR-V Execution Enviroment spec:
OpDecorationGroup, OpGroupDecorate, OpGroupMemberDecorate are not
allowed.
Fixes#2062
Validate that debugging instructions are not present for WebGPU
For WebGPU execution environments, check that all of the debug
instructions have already been stripped before validation.
Fixes#2063
We had a test that checks that a spirv binary where the depth of the
deepest nested construct is just below the default limit. This test
would take a long time causing a timeout in some builds. We are
questioning the value of the test since we already have a test that can
tell us if we are within a custom limit. We will remove the test.
Add tests for matrix type data rule validation
This covers the data rules for matrix types specified in the SPIR-V
spec, section 2.16.1, and the WebGPU SPIR-V Execution Environment
spec.
Fixes#2065Fixes#2080
Ban sequentially consistent with VulkanKHR
* Added validation check that SequentiallyConsistent memory semantics
are not used if the memory model is VulkanKHR
* Added tests
* Fixed a bug in evaluating constant 32-bit integers and updated some
handling to avoid inferring a value from a spec constant default
Remaining memory semantics validation
* Adds checks that OutputMemoryKHR, MakeAvailableKHR and MakeVisibleKHR
are only used if the VulkanMemoryModelKHR capabailty is present
* Added checks that MakeAvailableKHR requires release semantics
* Added checks that MakeVisibleKHR requires acquire semantics
* Added checks that MakeAvailableKHR and MakeVisibleKHR require a
storage class
Adds validator option to specify scalar block layout rules.
Both VK_KHR_relax_block_layout and VK_EXT_scalar_block_layout can be
enabled at the same time. But scalar block layout is as permissive
as relax block layout.
Also, scalar block layout does not require padding at the end of a
struct.
Add test for scalar layout testing ArrayStride 12 on array of vec3s
Cleanup: The internal getSize method does not need a round-up argument,
so remove it.
From the Vulkan 1.1 spec 14.5.2:
Variables identified with the Uniform storage class are used to access
transparent buffer backed resources. Such variables must be typed as
OpTypeStruct, or an array of this type.
Fixes#1949
Validate variable types for UniformConstant storage in Vulkan (#2008)
From the Vulkan 1.1 spec 14.5.2:
Variables identified with the UniformConstant storage class are used
only as handles to refer to opaque resources. Such variables must be
typed as OpTypeImage, OpTypeSampler, OpTypeSampledImage, or an array
of one of these types.
Fixes#2008
The Vulkan specification does not permit use of the VertexId and
InstanceId BuiltIn decorations, so add a check to ensure they are not
being used when the target environment is Vulkan.
* Validate the id bound.
Validates that the id bound for the module is not larger than the max id
bound. Also adds an option to set the max id bound. Allows the
optimizer option to set the max id bound to also set the id bound for
the validation run done by the optimizer.
Fixes#2030.
The SPV_KHR_8bit_storage extension does not permit 8-bit integers to be
cast directly to floating point types. We are seeing shaders in the
wild, being produced by toolchains like glslang, that are generating
invalid SPIR-V.
This change adds validation to check for the patterns not permitted, and
some tests that expose the failure.
In logical addressing mode, we are not allowed to generate variables
pointers. There is already a check for OpSelect. However, OpPhi
and OpPtrAccessChain are not checked to make sure it does not
generate an variable pointer. I've added those checks.
Fixes#1957.
* MakePointerVisibleKHR cannot be used with OpStore
* MakePointerAvailableKHR cannot be used with OpLoad
* MakePointerAvailableKHR and MakePointerVisibleKHR both require
NonPrivatePointerKHR
* NonPrivatePointerKHR is limited to a subset of storage classes
* many tests
* Validation checks for new image operands MakeTexelAvailableKHR and
MakeTexelVisibleKHR
* added tests
* Tests that NonPrivateTexelKHR is accepted for all image operands
Updating test environments
* fixed build errors
* changed image types for *FetchSuccess tests to use a type defined in
1.3 shader body
This commit checks the following when Shader capability exists:
"The FPRoundingMode decoration can be applied only to a width-only
conversion instruction that is used as the Object operand of an
OpStore storing through a pointer to a 16-bit floating-point object
in the StorageBuffer, Uniform, PushConstant, Input, or Output
Storage Classes.".
This commit will change the message for unknown extensions from an error
to a warning.
Code was added to limit the number of warning messages so that consummer
of the messages are not overwhelmed. This is standard practice in
compilers.
Many other issues were found at while looking into this. They have been
documented in #1950.
Fixes http://crbug.com/875547.
* Check rules from Execution Mode tables, 2.16.2 and the Vulkan
environment spec
* Allows MeshNV execution model with the following execution modes
* LocalSize, LocalSizeId, OutputPoints and OutputVertices
* Done to not break their validation
OpPhi instruction must appear before all non-OpPhi instructions
except for OpLine. Without this commit, Validator does not check
the case that an OpPhi is preceeded by an OpLine and the OpLine is
preceeded by a non-OpPhi instruction that is not OpLine.
Checked all instructions whose object is OpTypeSampledImage or
OpTypeImage as suggested in #487. OpImageTexelPointer instruction
is missing and others look good. This commit adds only
OpImageTexelPointer.
* Validate all type ids.
The validator does not check if the type of an instruction is actually
a type unless the OpCode has a specific requirement. For example,
OpFAdd is checked, but OpUndef is not.
The commit add a generic check that if there is a type id then the id
defines a type.
http://crbug.com/876694
* Merge other checks for type into new one.
There are a couple check that the type id is a type for specific
opcodes. Those have been mereged into 1.
Small changes to other test cases to make them valid enough for the
purpose of the test.
In the specification of `OpTypeFunction`, it says
> OpFunction is the only valid use of OpTypeFunction.
This commit add a check in the validator for this rule.
A test started to fail because the new check happens before the check
the test case is testing. Updated the test case to still fail the
check it was suppose to fail originally.
http://crbug.com/874571
* Split constant opcode validation out of idUsage and into
validate_constants.cpp
* minor style fixes
* reduced duplication
* fixed an issue with array sizing
When doing the validator checks, an instruction is currently registered
at the end of IdPass. This creates an inconsistency. In IdPass, an
instruction that uses its own result will treat that use as a forward
reference. Then in the following passes it will not because the
definition can be found.
It seems best to update the state after all of the check have been done
for the current instruction. This makes it consistent for all of the
passes.
This makes a different when trying to verify OpTypeStruct.
Fixes https://crbug.com/874372.
* Moved function opcode validation out of idUsage and into new files
* minor style changes
* General opcode checking is in validate_function.cpp
* Execution limitation checking is in
validate_execution_limitations.cpp
* Execution limitations was split into a new pass as it requires other
validation to register those limitations first.
* Changed entry point validation to check storage class of variable
instead of pointer
* added a test
* Moved several checks after opcode validation
* These checks should be able to guarantee individual instructions are
ok
* Updated tests due to reordered checks
* Moved type instruction validation out of validation idUsage into a new
file
* Consolidate type unique pass into new file
* Removed one bad test
* Reworked validation ordering
Fixes#1800
* Refactored duplication of code between OpCopyMemory and
OpCopyMemorySized validation
* Fixed some bugs in OpCopyMemorySized validation
* Replaced asserts with checks
* Added new tests
* Replaced uses in opcode validation of current_function()
* Added non-const accessor to function lookup in ValidationState_t
* Updated a couple bad tests due to check reordering
When validating a FunctionCall we can trigger an assert if we are not
currently within a function body. This CL adds verification that we are
within a function before attempting to add a function call.
Issue 1789.
Many of the files have using std::<foo> statements in them, but then the
use of <foo> will be inconsistently std::<foo> or <foo> scattered
through the file. This CL removes all of the using statements and
updates the code to have the required std:: prefix.
This CL removes the two diag() overloads and leaves only the version
which accepts an Instruction. This is safer as we never use the
implicit location from the validation state.
This CL updates the diag() calls in validate_cfg to provide the
associated instruction. This fixes a couple places where we output the
last line of the file instead of the instruction as the disassembly.
This CL changes validate.cpp to use diag providing an explicit
instruction. This changes the result of the function end checks to not
output a disassembly anymore as printing the last line of the module
didn't seem to make sense.
Currently, some instructions will be missing from the list of
ordered_instructions. This will cause issues due to the debug change
which passed the last instruction into subsequent passes.
This CL moves the addition to the ordered list out of the
RegisterInstruction method into AddOrderedInstruction. This method is
called first in ProcessInstruction and the CapabilitiesPass and IdPass
are updated to take an Instruction parameter.
This CL removes the redundant operator name from the error messages in
validate_composites. The operator will be printed on the next line with
the disassembly.
This CL splits the switch in ImagePass into individual validate
functions. The error messages have been updated to drop the
suffix/prefix of the opcode name since it will be displayed in the
disassembly.
This CL updates the code to pull a valid instruction for the line number
when outputting a component error in OpVectorShuffle. The error line
isn't the best at this point as it points at the component, but it's
better then a -1 (turning to max<size_t>) that was being output.
The error messages has been updated to better reflect what the error is
attempting to say.
Issue 1719.
- Vulkan 1.0 uses strict layout rules
- Vulkan 1.0 with relaxed-block-layout validator option
enforces all rules except for the relaxation of vector
offset.
- Vulkan 1.1 and later always supports relaxed block layout
Add spot check tests for the relaxed-block-layout scenarios.
Fixes#1697
This CL moves the various validate files into the val/ directory with
the rest of the validation infrastructure. This matches how opt/ is
setup with the passes with the infrastructure.
Other environments do not.
Add tests for OpenGL 4.5 and SPIR-V universal 1.0 to ensure
they still check monotonic layout.
For universal 1.0, we're assuming it otherwise follows Vulkan
rules for block layout.
Fixes#1685
This CL moves the validation code to the val:: namespace. This makes it
clearer which instance of the Instruction and other classes are being
referred too.
Implement rules for row-major matrices
Use ArrayStride and MatrixStride to compute sizes
Propagate matrix stride and RowMajor/ColumnMajor through array members of structs.
Fixes#1637Fixes#1668
Fixes#1618.
Adds a check that validates acceptable exits from case constructs. Case
constructs may only exit to another case construct, the corresponding
merge, an outer loop continue or outer loop merge.
Fixes#1664 : PushConstant with Block follows storage buffer rules
PushConstant variables were being checked with block rules, which are
too strict.
Fixes#1606 : StorageBuffer with Block layout follows buffer rules
StorageBuffer variables were not being checked before.
Fix layout messages: say storage class and decoration
We need to provide more information about storage class and decoration.
- Add asm/dis test for SPV_KHR_8bit_storage
- validator: SPV_KHR_8bit_storage capabilities enable declaration of 8bit int
TODO:
- validator: ban arithmetic on 8bit unless Int8 is enabled
Covered by https://github.com/KhronosGroup/SPIRV-Tools/issues/1595
Produce better error diagnostics in the CFG validation.
This CL fixes up several issues with the diagnostic error line output
in the CFG validation code. For the cases where we can determine a
better line it has been output. For other cases, we removed the
diagnostic line and the error line number from the results.
Fixes#1657
Fixes#937
Stop std140/430 validation when runtime array is encountered.
Check for standard uniform/storage buffer layout instead of std140/430.
Added validator command line switch to skip block layout checking.
Validate structs decorated as Block/BufferBlock only when they
are used as variable with storage class of uniform or push
constant.
Expose --relax-block-layout to command line.
dneto0 modification:
- Use integer arithmetic instead of floor.
We need this to reduce the test time on Visual Studio debug builds.
AppVeyor times out at 300s for a process.
Artificially lower the local variable limit check for testing purposes.
We don't get much value from using the full 500K+ variables.
Use a limit of 5000 instead.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1632
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
Also add a corresponding check for capabilities in the validator.
Update previously existing test cases where an instruction used to fail
assembling because of a version check, but now they succeed because the
instruction is also guarded by a capability. Now it should assemble.
Add tests to ensure that capabilities are checked appropriately.
The explicitly reserved instructions OpImageSparseSampleProj*
now assemble, but they fail validation.
Fixes#1624
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
This CL reverts the revert of 'Disallow array-of-arrays with DescriptorSets when
validating." Other changes have been committed which should aleviate the
AppVeryor resource constraints.
This reverts commit f2c93c6e12.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
Validate Ids before DataRules.
The DataRule validators call FindDefs with the assumption that they
definitions being looked at can be found. This may not be true if we
have not validated identifiers first.
This CL flips the IdPass and DataRulesPass to fix this issue.
Fixes#491
* Basic blocks now have a link to the terminator
* Check all case sepecific rules
* Missing check for branching into the middle of a case (#1618)
Fixes#1120
Checks that all static uses of the Input and Output variables are listed
as interfaces in each corresponding entry point declaration.
* Changed validation state to track interface lists
* updated many tests
* Modified validation state to store entry point names
* Combined with interface list and called EntryPointDescription
* Updated uses
* Changed interface validation error messages to output entry point name
in addtion to ID
Try to reduce the amount of disk space used by especially by debug builds,
which may be contributing to AppVeyor failures.
Collapses tests in categories:
- validator
- loop optimizations
- dominator analysis
- linker
Contributes to #1615
- Fix tests for basic group operations (e.g. Reduce) to allow for
new capabilities in SPIR-V 1.3 that enable them.
- Refactor operand capability check to avoid code duplication and
to put all checks that don't need table lookup before any table
lookup.
- Test round trip assembly/disassembly support for extension
SPV_NV_viewport_array2
- Test assembly and validation of decoration ViewportRelativeNV
Fixes#1596
Fixes#1281
* New structured cfg check: all non-construct header blocks'
predecessors must come from within the construct
* New function to calculate blocks in a construct
* Fixed a bug in BasicBlock type bitset
Relaxing check to not consider unreachable predecessors
* Fixing broken common uniform elim test
This CL updates the validate_id code to output the name of the object along with
the id number. There were a few instances which already output the name, this
just extends to all of them. Now, the output should say 123[obj] instead of just
123.
Issue #1581
* Disallow array-of-arrays with DescriptorSets when validating.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
According to the SPIR-V Spec, section 2.4 Logical Layout of a Module there
should be a single required OpMemoryModel instruction provided. This CL adds
validation that OpMemoryModel is provided to the SPIR-V validator.
Fixes#1207
SPV_EXT_shader_viewport_index_layer enables using ViewportIndex
and Layer in vertex and tessellation shaders.
Also, as per the Vulkan spec:
> The ViewportIndex decoration must be used only within vertex,
> tessellation evaluation, geometry, and fragment shaders.
> In a vertex, tessellation evaluation, or geometry shader, any
> variable decorated with ViewportIndex must be declared using
> the Output storage class.
> In a fragment shader, any variable decorated with ViewportIndex
> must be declared using the Input storage class.
Similarly for Layer.
* Adds new pass for validating non-uniform group instructions
* Currently on checks execution scope for Vulkan 1.1 and SPIR-V 1.3
* Added test framework
* Reworked how execution model limitations are checked
* Now OpFunction checks which entry points call it and checks its
registered limitations instead of building a call stack in the entry
point
* New tests
* Moving function to entry point mapping into VState
Relaxs checks for per-vertex builtin variables. If the builtin
decoration is applied to a variable, then those checks now allow a level
of arraying on the variable before checking the type consistency.
* Allows arrays of variables to be present for the per-vertex variables:
* Position
* PointSize
* ClipDistance
* CullDistance
* Updated tests
Add test for case where OpBranch branches to a value (a function value).
Previous tests only checked a label value (name of a block.).
Update validate_id.cpp to remove the TODO for OpBranch and say that it
is already checked in validate_cfg.cpp
