The limit for the number of struct members is parameterized using
command line options.
Add --max-struct-depth command line option.
Add --max-switch-branches command line option.
Add --max-function-args command line option.
Add --max-control-flow-nesting-depth option.
Add --max-access-chain-indexes option.
If a merge block is reachable, then it must be *strictly* dominated
by its header. Until now we've allowed the header and the merge
block to be the same.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/551
Also: Use dominates and postdominates methods on BasicBlock to
improve readability.
When applied to a structure-type member, all members of that structure
type must also be decorated with BuiltIn. (No allowed mixing of built-in
variables and non-built-in variables within a single structure.)
When applied to a structure-type member, that structure type cannot be
contained as a member of another structure type.
There is at most one object per Storage Class that can contain a
structure type containing members decorated with BuiltIn, consumed per
entry-point.
It is acceptable for OpAccessChain, OpInBoundsAccessChain,
OpPtrAccessChain, OpInBoundsPtrAccessChain, OpCompositeInsert, and
OpCompositeExtract to not take any indexes as arguments. In such cases,
no indexing will be done on the Base pointer/composite.
Added a new file where all the decoration validation can be performed.
In this change the SPIRV Spec Section 2.16.1 is implemented:
"It is illegal to initialize an imported variable. This means
that a module-scope OpVariable with initialization value cannot be
marked with the Import Linkage Type."
Also added unit tests.
* Added the decoration class as well as the code that registers the
decorations for each <id> and also decorations for struct members.
* Added unit tests for decorations in ValidationState as well as
decoration id tests.
According to the SPIRV Spec (2.16.1):
* There is at least one OpEntryPoint instruction, unless the Linkage
capability is being used.
* No function can be targeted by both an OpEntryPoint instruction and an
OpFunctionCall instruction.
Also updated unit tests to includ OpEntryPoint.
We are adding a new API which can be called to run the SPIR-V validator,
and retrieve the ValidationState_t object. This is very useful for
unit testing.
I have also added basic unit tests that demonstrate usage of this flow
and ease of use to verify correctness.
The validity of each command is checked based on the descripton in
SPIR-V Spec Section 3.32.12 (Composite Instructions).
Also checked that the number of indexes passed to these commands does
not exceed the limit described in 2.17 (Universal Limits).
Also added unit tests for each one.
entry_block_to_construct_ maps an entry block to its construct. The key
in this map (the entry block) is not unique, and therefore the entry for
the continue construct gets overwritten when the selection construct is
discovered.
Since a given block may be the entry block of different types of
constructs, the (basic_block, construct_type) pair should be able to
uniquely identify the construct.
Adds test:
- In this test, a basic block is the entry block of a continue construct
as well as the entry block of a selection construct.
It can be shown that this unit test would crash without the fix in this
PR and passes with the fix in this PR.
Validation for OpPtrAccessChain is similar to OpAccessChain with the
following difference: OpPtrAccessChain takes an extra argument (word 4)
which is the Element <id> argument.
Validation for OpInBoundsPtrAccessChain is also similar to OpPtrAccessChain.
Also added tests for all access chain instructions:
Modified the existing parameterized tests to accommodate OpPtrAccessChain and
OpInBoundsPtrAccessChain.
Also fixed a typo in previous commits.
According to Section 2.17 (Universal Limits) of the SPIR-V Spec, the
control flow nesting depth may not be larger than 1023.
This is checked only when we are required to have structured
control flow. Otherwise it's not clear how to compute control
flow nesting depth.
- Parse CHANGES file with Universal Python line endings in case
the source tree was checked out with Windows line endings.
- Use our own clone of strnlen_s which might not be available
everywhere.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/508
Generate a vim syntax file for SPIR-V assembly.
Copy the resulting spvasm.vim into your $HOME/.vim/syntax directory
to get syntax highlighting in Vim.
Also, suggest that the grammar file include information
about what opcodes can be used in OpSpecConstantOp.
According to sectin 2.17 in SPIR-V Spec, the structure nesting depth may
not be larger than 255. This is interpreted as structures nested in
structures. The code does not look into arrays or follow pointers to see
if it reaches a structure downstream.
Use memoization to avoid exponential runtime.
The validation code for OpAccessChain was missing OpTypeRuntimeArray as
a possible type that can be indexed into.
This was caught by running the validator on VKCTS.
Also adding unit tests for it.
* Result Type must be an OpTypePointer. Its Type operand must be the
type reached by walking the Base’s type hierarchy down to the last
provided index in Indexes, and its Storage Class operand must be the
same as the Storage Class of Base.
* Base must be a pointer, pointing to the base of a composite object.
* Indexes walk the type hierarchy to the desired depth, potentially down
to scalar granularity. The first index in Indexes will select the
top-level member/element/component/element of the base composite. All
composite constituents use zero-based numbering, as described by their
OpType... instruction. The second index will apply similarly to that
result, and so on. Once any non-composite type is reached, there must
be no remaining (unused) indexes. Each of the Indexes must:
- be a scalar integer type,
- be an OpConstant when indexing into a structure.
* Check for the case where no indexes are passed to OpAccessChain.
Minor improvements based on code review.
According to the Universal Limits section of the SPIR-V Spec (2.17), the
number of global variables may not exceed 65,535 and the number of local
variables may not exceed 524,287.
Also added unit tests for each one.
According to the SPIR-V spec (section 2.17: Universal Limits), the
OpTypeFunction instruction may not take more than 255 arguments for the
function. Also added unit tests for it.
The number of (literal, label) pairs passed to OpSwitch may not exceed
16,383. Added code to validate this and added unit tests for it.
Also fixed a typo in another validor error message.
This is described in Section 2.17 of the SPIR-V Spec.
* Updated existing unit test 'SemanticsIdIsAnIdNotALiteral' to pass by
manipulating the ID bound in its binary header.
* Fixed boundary check in the code.
* Added unit test to check the case that the largest ID is equal to the
ID bound.
This change implements the validation for usages of OpSampledImage
instruction as described in the Data Rules section of the Universal
Validation Rules of the SPIR-V Spec.
SpecConstantComposite may specialize to a vector, matrix, array, or
struct. In each case, the number of components and type of components
that are being specialized to must match the expected result type.
Removed use of macros in these tests.
Now using the spvValidateBase class. Using CompileSuccessfully(), and
ValidateInstructions() to compile to binary and run the validator. Also
using getDiagnosticString() to check the proper error message string.
All the heavy lifting is done in ValidateBase class.
According to the Data Rules section of 2.16.1. Universal Validation
Rules of the SPIR-V Spec:
Forward reference operands in an OpTypeStruct
* must be later declared with OpTypePointer
* the type pointed to must be an OpTypeStruct
* had an earlier OpTypeForwardPointer forward reference to the same <id>
These rules are under "Data Rules" in 2.16.1 (Universal Validation
Rules) part of the SPIR-V 1.1 Specification document:
* Scalar floating-point types can be parameterized only as 32 bit, plus
any additional sizes enabled by capabilities.
* Scalar integer types can be parameterized only as 32 bit, plus any
additional sizes enabled by capabilities.
* Vector types can only be parameterized with numerical types or the
OpTypeBool type.
* Matrix types can only be parameterized with floating-point types.
* Matrix types can only be parameterized as having only 2, 3, or 4
columns.
* Specialization constants (see Specialization) are limited to integers,
Booleans, floating-point numbers, and vectors of these.
Number of components in a vector can be 2 or 3 or 4. If Vector16
capability is used, 8 and 16 components are also allowed.
Also added unit tests for vector data rule.
Example of an error:
spirv-tools/source/validate_cfg.cpp:516:45: error: chosen constructor is
explicit in copy-initialization:
_.current_function().RegisterBlockEnd({}, opcode);
* Allows OpTypeForwardPointer to reference IDs not yet declared in
the module
* Allows OpTypeStruct to reference IDs not yet declared in
the module
Possible Issue: OpTypeStruct should only allow forward references
if the ID is a pointer that is referenced by a forward pointer. Need
Type support in Validator which is currently a work in progress.
There is no difference between the previous IgnoreMessage() function
and a null std::function, from functionality's perspective.
The user can set nullptr as the MessageConsumer, so need to guard
against nullptr before calling the consumer anyway. It's better
we use it internally so that it may expose problems by us instead
of the user.
Default-constructed Pass/PassManager will have a MessageConsumer
which ignores all messages. SetMessageConsumer() should be called
to supply a meaningful MessageConsumer.
Requires use of SPIRV-Headers that has support
for SPV_KHR_shader_ballot.
Adds assembler, disassembler, binary parser support.
Adds general support for allowing an operand to be
only enabled by a set of extensions.
TODO: Validator support for extension checking.
* Use PIMPL idiom in the C++ interface.
* Clean up interface for assembling and disassembling.
* Add validation into C++ interface.
* Add more tests for the C++ interface.
Add the following macros for logging purpose:
* SPIRV_ASSERT
* SPIRV_DEBUG
* SPIRV_UNIMPLEMENTED
* SPIRV_UNREACHABLE
The last two is always turned on, while the first two can only
be turned on in debug build.
Every time an event happens in the library that the user should be
aware of, the callback will be invoked.
The existing diagnostic mechanism is hijacked internally by a
callback that creates an diagnostic object each time an event
happens.
Defer removal of a Phi's result id from the undefined-forward-reference
set until after you've scanned the arguments. The reordering is only
significant for Phi.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/415
ParseNumber(): Returns false if the given string is a nullptr.
ParseAndEncodeXXXX(): Returns kInvalidText and populate error message:
"The given text is a nullptr", if the givne string is a nullptr.
The pass instance is constructed with a map from spec id (uint32_t) to
default values in string format. The default value strings will be
parsed to numbers according to the target spec constant type.
If the Spec Id decoration is found to be applied on multiple different
target ids, that decoration instruction (OpDecorate or OpGroupDecorate)
will be skipped. But other decoration instrucitons may still be
processed.
Pull out the number parsing logic from
AssemblyContext::binaryEncodeNumericLiteral() to utilities.
The new utility function: `ParseAndEncodeNumber()` now accepts:
* number text to parse
* number type
* a emit function, which is a function which will be called with each
parsed uint32 word.
* a pointer to std::string to be overwritten with error messages.
(pass nullptr if expect no error message)
and returns:
* an enum result type to indicate the status
Type/Structs moved to utility:
* template<typename T> class ClampToZeroIfUnsignedType
New type:
* enum EncodeNumberStatus: success or error code
* NumberType: hold the number type information for the number to be parsed.
* several helper functions are also added for NumberType.
Functions moved to utility:
* Helpers:
* template<typename T> checkRangeAndIfHexThenSignExtend() -> CheckRangeAndIfHex....()
* Interfaces:
* template<typename T> parseNumber() -> ParseNumber()
* binaryEncodeIntegerLiteral() -> ParseAndEncodeIntegerNumber()
* binaryEncodeFloatingPointLiteral() -> ParseAndEncodeFloatingPointNumber()
* binaryEncodeNumericLiteral() -> ParseAndEncodeNumber()
Tests added/moved to test/ParseNumber.cpp, including tests for:
* ParseNumber(): This is moved from TextToBinary.cpp to ParseNumber.cpp
* ParseAndEncodeIntegerNumber(): New added
* ParseAndEncodeFloatingPointNumber(): New added
* ParseAndEncodeNumber(): New added
Note that the error messages are kept almost the same as before, but
they may be inappropriate for an utility function. Those will be fixed
in another CL.
De-duplicate constants and unifies the uses of constants for a SPIR-V
module. If two constants are defined exactly the same, only one of them
will be kept and all the uses of the removed constant will be redirected
to the kept one.
This pass handles normal constants (defined with
OpConstant{|True|False|Composite}), some spec constants (those defined
with OpSpecConstant{Op|Composite}) and null constants (defined with
OpConstantNull).
There are several cases not handled by this pass:
1) If there are decorations for the result id of a constant defining
instruction, that instruction will not be processed. This means the
instruction won't be used to replace other instructions and other
instructions won't be used to replace it either.
2) This pass does not unify null constants (defined with
OpConstantNull instruction) with their equivalent zero-valued normal
constants (defined with OpConstant{|False|Composite} with zero as the
operand values or component values).
Also removed the default argument value of `skip_nop` for function
`SinglePassRunAndCheck()` and `SinglePassRunAndDisassemble()`. This is
required to support variadic arguments.
Use libspirv::CapabilitySet instead of a 64-bit mask.
Remove dead function spvOpcodeRequiresCapability and its tests.
The JSON grammar parser is simplified since it just writes the
list of capabilities as a braced list, and takes advantage of
the CapabilitySet intializer-list constructor.
For the spec constants defined by OpSpecConstantOp and
OpSpecContantComposite, if all of their operands are constants with
determined values (normal constants whose values are fixed), calculate
the correct values of the spec constants and re-define them as normal
constants.
In short, this pass replaces all the spec constants defined by
OpSpecContantOp and OpSpecConstantComposite with normal constants when
possible. So far not all valid operations of OpSpecConstantOp are
supported, we have several constriction here:
1) Only 32-bit integer and boolean (both scalar and vector) are
supported for any arithmetic operations. Integers in other width (like
64-bit) are not supported.
2) OpSConvert, OpFConvert, OpQuantizeToF16, and all the
operations under Kernel capability, are not supported.
3) OpCompositeInsert is not supported.
Note that this pass does not unify normal constants. This means it is
possible to have new generatd constants defining the same values.
This lets us write smaller test cases with the IrLoader, avoiding
boilerplate for function begin/end, and basic block begin/end.
Also ForEachInst is more forgiving of cases where a basic block
doesn't have a label, and when a function doesn't have a defining
or end instruction.
Also:
- Add const forms of ForEachInst
- Rewrite Module::ToBinary in terms of ForEachInst
- Add Instruction::ToBinaryWithoutAttachedDebugInsts
- Delete the ToBinary method on Function, BasicBlock, and Instruction
since it can now be implemented with ForEachInst in a less confusing
way, e.g. without recursion.
- Preserve debug line instructions on OpFunctionEnd (and store that
instruction as a unique-pointer, for regularity).
* Fix the behavior when analyzing an individual instruction:
* exisiting instruction:
Clear the original records and re-analyze it as a new instruction.
* new instruction with exisiting result id:
Clear the original records of the exisiting result id. This means
the records of the analyzed result-id-defining instruction will be
overwritten by the record of the new instruction with the same
result id.
* new instruction with new result id or without result id:
Just update the internal records to incorperate the new
instruction.
* Add tests for analyzing individual instruction w/o an exisiting module.
* Refactor ClearInst() implementation
* Remove ClearDef() function.
* Fixed a bug in DefUseManager::ReplaceAllUsesWith() that OpName
instruction may trigger the assertion incorrectly.
* update the blurbs for EraseUseRecordsOfOperandIds()
By deriving from std::iterator, iterator_traits will be properly
set up for our custom iterator type, thus we can use algorithms
from STL with our custom iterators.
Previously we use vectors of objects and move semantics to handle
ownership. That approach has the flaw that inserting an object into
the middle of a vector, which may trigger a vector reallocation,
can invalidate some addresses taken from instructions.
Now the in-memory representation internally uses vector of unique
pointers to handle ownership. Since objects are explicitly heap-
allocated now, pointers to them won't be invalidated by vector
resizing anymore.
- Find unreachable continue targets. Look for back edges
with a DFS traversal separate from the dominance traversals,
where we count the OpLoopMerge from the header to the continue
target as an edge in the graph.
- It's ok for a loop to have multiple back edges, provided
they are all from the same block, and we call that the latch block.
This may require a clarification/fix in the SPIR-V spec.
- Compute postdominance correctly for infinite loop:
Bias *predecessor* traversal root finding so that you use
a later block in the original list. This ensures that
for certain simple infinite loops in the CFG where neither
block branches to a node without successors, that we'll
compute the loop header as dominating the latch block, and the
latch block as postdominating the loop header.
Fixes dominance calculation when there is a forward arc from an
unreachable block A to a reachable block B. Before this fix, we would
say that B is not dominated by the graph entry node, and instead say
that the immediate dominator of B is the psuedo-entry node of the
augmented CFG.
The fix:
- Dominance is defined in terms of a traversal from the entry block
of the CFG. So the forward DFS should start from the function
entry block, not the pseudo-entry-block.
- When following edges backward during dominance calculations, only go to
nodes that are actually reachable in the forward traversal.
Important: the sense of reachability flips around when computing
post-dominance.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/297
The def-use dominance checker doesn't have enough info to know
that a particular use is in an OpPhi, so skip tracking those uses
for now. Add a TODO to do a proper OpPhi variable-argument check
in the future.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/286
Ensure the dominance calculation visits all nodes in the CFG.
The successor list of the pseudo-entry node is augmented with
a single node in each cycle that otherwise would not be visited.
Similarly, the predecssors list of the pseduo-exit node is augmented
with the a single node in each cycle that otherwise would not
be visited.
Pulls DepthFirstSearch out so it's accessible outside of the dominator
calculation.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/279
Add a pass to freeze spec constants to their default values. This pass does
not fold the frozen spec constants and does not handle SpecConstantOp
instructions and SpecConstantComposite instructions.
* Creates an ID class which manages definition and use of IDs
* Moved tracking code from validate.cpp to validate_id.cpp
* Rename and combine SsaPass and ProcessIds into IdPass
* Remove module dependency in Function
Works around issue 248 by weakening the test:
https://github.com/KhronosGroup/SPIRV-Tools/issues/248
The validator should try to track (32-bit) constant values, and then
for capability checks on IDs, check the referenced value, not the
raw ID number.
For dominance calculations we use an "augmented" CFG
where we always add a pseudo-entry node that is the predecessor
in the augmented CFG to any nodes that have no predecessors in the
regular CFG. Similarly, we add a pseudo-exit node that is the
predecessor in the augmented CFG that is a successor to any
node that has no successors in the regular CFG.
Pseudo entry and exit blocks live in the Function object.
Fixes a subtle problem where we were implicitly creating
the block_details for the pseudo-exit node since it didn't
appear in the idoms map, and yet we referenced it. In such a case the
contents of the block details could be garbage, or zero-initialized.
That sometimes caused incorrect calculation of immediate dominators
and post-dominators. For example, on a debug build where the details
could be zero-initialized, the dominator of an unreachable block would
be given as the pseudo-exit node. Bizarre.
Also, enforce the rule that you must have an OpFunctionEnd to close off
the last function.
Refactor the way the post order vector is created. This new method
will allow for the extraction of backedges and create the post order
vector in one pass.
diagnostic.cpp:
- unreachable code
operand.cpp
- conversion between int and uint32_t
- unreachable code
hex_float.h:
- conversion from 'const int' to 'unsigned int'
- unreachable code
validate_id.cpp
- forcing value to bool 'true' or 'false'
validate_types.cpp:
- forcing value to bool 'true' or 'false'
* ValidationState_t and idUsage now store the addressing model and memory model of the SPIR-V module (this is necessary for certain instructions that need different checks depending on if the logical or physical addressing model is used)
* removed SpvOpPtrAccessChain and SpvOpInBoundsPtrAccessChain from spvOpcodeIsPointer again as these are disallowed in logical addressing mode and only allowed in physical addressing mode (which doesn't use/need spvOpcodeIsPointer in the first place)
* added SpvOpImageTexelPointer and SpvOpCopyObject to spvOpcodeIsPointer
* OpLoad/OpStore now only check if the used pointer operand originated from a valid pointer producing opcode in logical addressing mode (as per 2.16.1)
* moved bitcast pointer tests to the kernel / physical addressing model part (+cleanup)
* renamed spvOpcodeIsPointer to spvOpcodeReturnsLogicalPointer to clarify this function is only meant to be used with the logical addressing model
Add a high level version number for SPIRV-Tools, beginning
with v2016.0-dev. The README describes the format of the
version number.
The high level version number is extracted from the CHANGES
file. That works around:
- stale-bait for when we don't add tags to the repository
- our inability to add tags to the repository
Option --version causes spirv-as, spirv-dis, and spirv-val to
show the high level version number.
Add spvSoftwareVersionString to return the C-string for
the high level version number.
Add spvSoftwareVersionDetailsString() so that clients can get
more information if they want to.
Also allows us to clean up the uses in the tool executables files,
so now only one file includes build-version.inc.
Move the update-build-version logic to the only
CMakeLists file that needs it.
The update build version script takes a new argument
to name the output file.
* IdType is renamed to IdResultType.
* version is splitted into major_version and minor_version.
* Seperate Scope and IdScope operand kinds. Same for MemorySemantics.
For fulfilling this purpose, the |opcode| field in the
|spv_parsed_instruction_t| struct is changed to of type uint16_t.
Also add functions to query the information of a given SPIR-V
target environment.
This patch uses a Python script to parse the JSON grammar file to
generate the opcode table and operand kind tables.
Now we don't need to do the post-processing (from OperandClass
to spv_operand_type_t) and copying of the opcode info table is
not required anymore!
Previously, the grammar allowed many execution modes for a single
OpExecutionMode instruction.
Removes the variable- and optional- execution mode operand type
enum values.
Issue found by antiagainst@
Recognize SpvOpInBoundsPtrAccessChain and SpvOpPtrAccessChain as opcodes
returning a pointer.
* spvOpcodeIsPointer: recognize SpvOpInBoundsPtrAccessChain and SpvOpPtrAccessChain as opcodes returning a pointer
* isValid<SpvOpEntryPoint>: don't check kernel function signatures (these don't have to be 'void main(void)')
* added tests for kernel OpEntryPoint, OpInBoundsPtrAccessChain and OpPtrAccessChain, as well as facilities to actually test kernel/OpenCL SPIR-V
* fixed pow and pown specification (both should take 2 parameters), spec bug reported at https://www.khronos.org/bugzilla/show_bug.cgi?id=1469
* use ASSERT_TRUE instead of ASSERT_EQ
* added pow and pown test (pow(val, 2.0f) and pown(val, 3))
Revert " * fixed pow and pown specification (both should take 2 parameters), spec bug reported at https://www.khronos.org/bugzilla/show_bug.cgi?id=1469"
This reverts commit c3d5a87e73.
Revert " * added pow and pown test (pow(val, 2.0f) and pown(val, 3))"
This reverts commit 7624aec720.
Users always want to run all the checks. The spv_validate_options_t
mechanism, which provides little benefits to users, complicates the
internal implementation and also makes the tests exercise different
paths as users do.
Right now the tests are more like integration tests instead of
unit tests, which should be our next refactoring aim.
Now we have public headers arranged as follows:
$SPIRV_TOOLS_ROOT/include/spirv-tools/libspirv.h
$SPIRV_TOOLS_ROOT/include/spirv/spirv.h
$SPIRV_TOOLS_ROOT/include/spirv/GLSL.std.450.h
$SPIRV_TOOLS_ROOT/include/spirv/OpenCL.std.h
A project should use -I$SPIRV_TOOLS_ROOT/include
and then #include "spirv-tools/libspirv.h"
The headers from the SPIR-V Registry can be accessed as "spirv/spirv."
for example.
The install target should also install the headers from the SPIR-V
Registry. The libspirv.h header is broken otherwise.
The SPIRV-Tools library depends on the headers from the SPIR-V Registry.
The util/bitutils.h and util/hex_float.h are pulled into the internal
source tree. Those are not part of the public API to SPIRV-Tools.
This showed up in mips and mips64 builds. A combination of templates
and the error reporting were causing gcc to crash. This splits up the
functionality in a way that now successfully compiles.
- The SPIR-V spec generator has changed how it represents optional
operands. Now it tracks a separate boolean flag indicating optionality.
However, SPIRV-Tools still wants to represent both operand class
and optionality in the same enums space (SPV_OPERAND_TYPE_*).
So there's extra work in the patch.
- In the spec generator, OperandImage is now OperandImageOperands.
This affects enum translation in opcode.cpp.
- In the spec generator, image operands are explicitly followed by
Id, and VariableIds. However, SPIRV-Tools uses the bits set
in the image operand bitmask to control the number and meaning
of the Ids that follow. So in writing the opcode.inc syntax
table, drop all operands after OperandImageOperands.
- Some enums are now more explicitly represented in the generated
opcode.inc:
- AccessQualifier (e.g. on OpTypeImage), in both required and
optional flavours.
- MemoryAccess (e.g. on loads and stores)
- Add SPV_OPERAND_TYPE_OPTIONAL_ACCESS_QUALIFIER
- Add tests for the optional AccessQualifier operand on OpTypeImage.
- Update the AccessQualifier test for OpTypeImage so it's a round
trip test through the disassembler as well.
Also
- Add type_id to spv_id_info_t.
- Use spv_id_info_t::type_id instead of words[1].
Triggered some asserts on tests, where the code incorrectly assumed
words[1] had a type. Remove the asserts and handle gracefully.
- Add tests for OpStore of a label, a void, and a function.
Remove redundant validations of OpConstant and OpConstantComposite.
Binary parser already performs these checks, so the validations can
never be triggered.
Enable bad-constant tests.
Replace two other, imperfect mechanisms for use-def tracking.
Use ValidationState_t::entry_points to track entry points.
Concentrate undefined-ID diagnostics in a single place.
Move validate_types.h content into validate.h due to increased
inter-dependency.
Track uses of all IDs: TYPE_ID, SCOPE_ID, ...
Also update some blurbs.
Fix entry-point accumulation and move it outside ProcessIds().
Remove validate_types.h from CMakeLists.txt.
Blurb for spvIsIdType.
Remove redundant diagnostics for undefined IDs.
Join "can not" and reformat.
