This patch provides new __futimens64 explicit 64 bit function for
setting access and modification time of file (by using its file descriptor).
Moreover, a 32 bit version - __futimens has been refactored to internally use
__futimens64.
The __futimens is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit
struct __timespec64.
When pointer to struct __timespec64 is NULL - the file access and modification
time is set to the current one (by the kernel) and no conversions from struct
timespec to __timespec64 are performed.
The __futimens64 reuses __utimensat64_helper defined for __utimensat64.
The test procedure for __futimens64 is the same as for __utimensat64 conversion
patch.
This patch provides new __utimensat64 explicit 64 bit function for
setting access and modification time of a file. Moreover, a 32 bit version
- __utimensat has been refactored to internally use __utimensat64.
The __utimensat is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit
struct __timespec64.
When pointer to struct __timespec64 is NULL - the file access and modification
time is set to the current one and no conversions from struct timespec to
__timespec64 are performed.
The new utimensat_time64 syscall available from Linux 5.1+ has been used,
when applicable.
The new helper function - __utimensat64_helper - has been introduced to
facilitate code re-usage on function providing futimens syscall handling.
The Linux kernel checks if passed tv_nsec value overflows, so there is no
need to repeat it in glibc.
When utimensat syscall on systems supporting 32 bit time ABI is used,
the check is performed if passed data (which may have 64 bit tv_sec) fits
into 32 bit range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with utimensat_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports utimensat_time64
syscall.
- Linux v4.19 (no utimensat_time64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support utimensat_time64 syscall, so the fallback
to utimensat is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
Passing NULL as the timeout parameter to pthread_timedjoin_np has resulted
in it behaving like pthread_join for a long time. Since that is now the
documented behaviour, we ought to test that both it and the new
pthread_clockjoin_np support it.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the generic futex_lock_pi and futex_unlock_pi to wrap
around the syscall machinery required to issue the syscall calls. It
simplifies a bit the futex code required to implement PI mutexes.
No function changes, checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To help y2038 work avoid duplicate all the logic of nanosleep on
non cancellable version, the patch replace it with a new futex
operation, lll_timedwait. The changes are:
- Add a expected value for __lll_clocklock_wait, so it can be used
to wait for generic values.
- Remove its internal atomic operation and move the logic to
__lll_clocklock. It makes __lll_clocklock_wait even more generic
and __lll_clocklock slight faster on fast-path (since it won't
require a function call anymore).
- Add lll_timedwait, which uses __lll_clocklock_wait, to replace both
__pause_nocancel and __nanosleep_nocancel.
It also allows remove the sparc32 __lll_clocklock_wait implementation
(since it is similar to the generic one).
Checked on x86_64-linux-gnu, sparcv9-linux-gnu, and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
NPTL is already Linux specific, there is no need to parametrize low
level lock futex operations and add a sysdep Linux specific
implementation. This patch moves the relevant Linux code to nptl one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
NPTL is already Linux specific, there is no need to parametrize futex
operations and add a sysdep Linux specific implementation. This patch
moves the relevant Linux code to nptl one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
set_max_fast sets the "impossibly small" value based on,
eventually, MALLOC_ALIGNMENT. The comparisons for the smallest
chunk used is, eventually, MIN_CHUNK_SIZE. Note that i386
is the only platform where these are the same, so a smallest
chunk *would* be put in a no-fastbins fastbin.
This change calculates the "impossibly small" value
based on MIN_CHUNK_SIZE instead, so that we can know it will
always be impossibly small.
This is a thorough revision of all the material relating to the
functions time, stime, gettimeofday, settimeofday, clock_gettime,
clock_getres, clock_settime, and difftime, spilling over into the
discussion of time-related data types (which now get their own
section) and touching the adjtime family as well (which deserves its
own thorough revision, but I'd have to do a bunch of research first).
Substantive changes are:
* Document clock_gettime, clock_getres, and clock_settime. (Only
CLOCK_REALTIME and CLOCK_MONOTONIC are documented; the others are
either a bit too Linux-specific, or have more to do with measuring
CPU/processor time. That section _also_ deserves its own thorough
revision but again I'd have to do a bunch of research first.)
* Present gettimeofday, settimeofday, and struct timeval as obsolete
relative to clock_*.
* Remove the documentation of struct timezone. Matching POSIX,
say that the type of the second argument to gettimeofday and
settimeofday is [const] void *.
* Clarify ISO C and POSIX's requirements on time_t. Clarify the
circumstances under which difftime is equivalent to simple
subtraction.
* Consolidate documentation of most of the time-related data types
into a new section "Time Types," right after "Time Basics." (The
exceptions are struct tm, which stays in "Broken-down Time," and
struct times, which stays in "Processor And CPU Time."
* The "Elapsed Time" section is now called "Calculating Elapsed Time"
and includes only difftime and the discussion of how to compute
timeval differences by hand.
* Fold the "Simple Calendar Time," "High Resolution Calendar," and
"High Accuracy Clock" sections together into two new sections titled
"Getting the Time" and "Setting and Adjusting the Time."
Also make the public prototype of gettimeofday declare its second
argument with type "void *" unconditionally, consistent with POSIX.
It is also consistent with POSIX.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
timespec_get is the same function as clock_gettime, with an obnoxious
coating of NIH painted on it by the ISO C committee. In addition to
the rename, it takes its arguments in a different order, it returns 0
on *failure* or a positive number on *success*, and it requires that
all of its TIME_* constants be positive. This last means we cannot
directly reuse the existing CLOCK_* constants for it, because
those have been allocated starting with CLOCK_REALTIME = 0 on all
existing platforms.
This patch simply promotes the sysdeps/posix implementation to
universal, and removes the Linux-specific implementation, whose
apparent reason for existing was to cut out one function call's worth
of overhead.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
As for gettimeofday, time will be implemented based on clock_gettime
on all platforms and internal code should use clock_gettime
directly. In addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot
fail, using the same rationale for gettimeofday change. And internal
helper was added (time_now).
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Change the default implementation of time to call clock_gettime,
to align with new Linux ports that are expected to only implement
__NR_clock_gettime. Arch-specific implementation that either call
the time vDSO or route to gettimeofday vDSO are not removed.
Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic
CLOCK_REALTIME clockid. This takes less CPU time and its behavior
better matches what the current glibc does.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement stime,
not settimeofday or a direct syscall. Then convert stime into a
compatibility symbol and remove its prototype from time.h.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Linux/Alpha has two versions of several system call wrappers that take
or return data of type "struct timeval" (possibly nested inside a
larger structure). The GLIBC_2.0 version is a compat symbol that
calls __NR_osf_foo or __NR_old_foo and uses a struct timeval with a
32-bit tv_sec field. The GLIBC_2.1 version is used for current code,
calls __NR_foo, and uses a struct timeval with a 64-bit tv_sec field.
This patch changes all of the compat symbols of this type to be
wrappers around their GLIBC_2.1 counterparts; the compatibility system
calls will no longer be used. It serves as a proposal for part of how
we do the transition to 64-bit time_t on systems that currently use
32-bit time_t:
* The patched glibc will NOT use system calls that involve 32-bit
time_t to implement its compatibility symbols. This will make both
our lives and the kernel maintainers' lives easier. The primary
argument I've seen against it is that the kernel could warn about
uses of the old system calls, helping people find old binaries that
need to be recompiled. I think there are several other ways we
could accomplish this, e.g. scripts to scan the filesystem for
binaries with references to the old symbol versions, or issuing
diagnostics ourselves.
* The compat symbols do NOT report failure after the Y2038 deadline.
An earlier revision of this patch had them return -1 and set errno
to EOVERFLOW, but Adhemerval pointed out that many of them have
already performed side effects at the point where we discover the
overflow, so that would break more than it fixes. Also, we don't
want people to be _checking_ for EOVERFLOW from these functions; we
want them to recompile with 64-bit time_t. So it's not actually
useful for them to report failure to the calling code.
* What they do do, when they encounter overflow, is saturate the
overflowed "struct timeval"(s): tv_sec is set to INT32_MAX and
tv_nsec is set to 999999. That means time stops advancing for
programs with 32-bit time_t when they reach the deadline. That's
obviously going to break stuff, but I think wrapping around is
probably going to break _more_ stuff. I'd be interested to hear
arguments against, if anyone has one.
The new header file tv32-compat.h is currently Alpha-specific but I
mean for it to be reused to aid in writing wrappers for all affected
architectures. I only put it in sysdeps/unix/sysv/linux/alpha for now
because I haven't checked whether the various "foo32" structures it
defines agree with the ABI for ports other than Linux/Alpha.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In commit 4b7c74179c the nsswitch.conf
file was harmonized with downstream distributions, but this change
included adding "initgroups: files". We should not add initgroups by
default, we can have it, but it should be commented out to allow it
to inherit the settings for group. The problem is principally that
downstream authconfig won't update initgroups and it will get out of
sync with the setting for group.
This patch provides new __clock_getres64 explicit 64 bit function for
getting the resolution (precision) of specified clock ID. Moreover, a
32 bit version - __clock_getres has been refactored to internally use
__clock_getres64.
The __clock_getres is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion from 64 bit
struct __timespec64 to struct timespec.
The new clock_getres_time64 syscall available from Linux 5.1+ has been used,
when applicable.
On systems which are not supporting clock_getres_time64 (as their
clock_getres supports 64 bit time ABI) the vDSO syscall is attempted.
On the contrary the non-vDSO syscall is used for clock_getres_time64 as
up till now the kernel is not providing such interface.
No additional checks (i.e. if tv_nsec value overflow) are performed on
values returned via clock_getres{_time64} syscall, as it is assumed that
the Linux kernel will either return 0 and provide correct value or error.
The check for tv_sec being out of range on systems still supporting 32 bit
time (__TIMESIZE != 64) without Y2038 time support is also omitted as it is
_very_ unlikely that we would have a timer with resolution which exceeds 32
bit time_t range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_getres_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
clock_getres_time64 syscall.
- Linux v4.19 (no clock_getres_time64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support clock_getres_time64 syscall, so the fallback
to clock_getres is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
This commit adds previously missing transliterations for several code points
in the Unicode blocks "Miscellaneous Mathematical Symbols-A/B" -
transliterated to their approximate ASCII representations. It also adds a
corresponding iconv transliteration test.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The testroot does not have a gunzip command, so the charmap files
should not be installed gzipped else they cannot be used (and thus
tested). With this patch, installing with INSTALL_UNCOMPRESSED=yes
installs uncompressed charmaps instead.
Note that we must purge the $(symbolic_link_list) as it contains
references to $(DESTDIR), which we change during the testroot
installation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If WAIT_FOR_DEBUGGER is set to a non-zero value in the environment,
any test that runs will print some useful gdb information and wait
for gdb to attach to it and clear the "wait_for_debugger" variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add a new macro __STATFS_MATCHES_STATFS64 that specifies if fsblkcnt_t
matches fsblkcnt64_t and if fsfilcnt_t matches fsfilcnt64_t.
As we don't have the padding we also need to update the overflow checker
to not access the undefined members.
Commit 95c1056962 ("elf: Use nocancel
pread64() instead of lseek()+read()") added calls to __pread64 to
the dynamic loader. On Hurd, this needs an implementation in the
dynamic loader because the rtld-pread64 rebuild pulls in too many
symbols.
Fixes: 95c1056962
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
On a 32-bit platform with a 64-bit ino_t type (__INO_T_MATCHES_INO64_T
defined) we want to update the stat struct to remove the padding as it
isn't required. As we don't have the padding we also need to update the
overflow checker to not access the undefined members.
As an svc invocation does not clobber any user space registers
despite of the return value r2 and it does not need a special
stack frame. This patch gets rid of the extra frame.
We just have to save and restore r6 and r7 as those are
preserved across function calls.
This patch addresses an issue reported in
<https://sourceware.org/ml/libc-alpha/2019-07/msg00661.html> where the
creation of testroot.pristine, on encountering
LD_TRACE_LOADED_OBJECTS=1 of the form
libc.so.6 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/libc.so.6 (0x772dd000)
/lib32/ld.so.1 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/elf/ld.so.1 (0x7747b000)
tries to copy /lib32/ld.so.1 (which does not exist) into the testroot
instead of copying the path on the RHS of "=>", which does exist,
because the Makefile logic assumes that the path on such a line with
'/' should be copied, when if there are such paths on both the LHS and
the RHS of "=>", only the one on the RHS necessarily exists and so
only that should be copied. The patch follows the approach suggested
by DJ in <https://sourceware.org/ml/libc-alpha/2019-07/msg00662.html>,
with the suggestion from Andreas in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00514.html> of a
single sed command in place of pipeline of grep and three sed
commands.
Tested for x86_64, with and without --enable-hardcoded-path-in-tests;
a previous version with multiple sed commands, implementing the same
logic, also tested for MIPS, with and without
--enable-hardcoded-path-in-tests, to confirm it fixes the original
problem.
Co-authored-by: DJ Delorie <dj@redhat.com>
Remove _finite tests and references from x86_64. Rather than calling
__exp_finite, use exp directly (since it's the same entry point).
x86_64 builds and passes testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the finite-math tests from the testsuite - these are no longer
useful after removing math-finite.h header.
Passes buildmanyglibc, build&test on x86_64 and AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The rewritten clock_settime code (which now supports 64 bit time on systems
with __WORDSIZE == 32) for Linux now relies on the
__ASSUME_TIME64_SYSCALLS flag set.
Lets explicitly include the header file where it is defined to avoid
any indirect inclusion (which may pose some unwanted API definitions).
Tested with scripts/build-many-glibcs.py script.
_nl_load_locale_from_archive() checks for a zero size, but
divides by both (size) and (size-2). Extend the check to
guard against a size of two or less.
Tested by manually corrupting locale-archive and running a program
that calls setlocale() with LOCPATH unset (size is typically very
large).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I had a local commit fed33b0fb0 which crossed the boundary
between when we had and didn't have ChangeLog's and this
caused me to have an odd behaviour with the file rename,
despite cleaning up the original ChangeLog changes.
Sorry. Corrected now.
Document in comments that __pthread_enable_asynccancel and
__pthread_disable_asynccancel must be AS-safe in general with
the exception of the act of cancellation.
This is in preparation for changes in the dynamic linker so that
pread() is used instead of lseek()+read().
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
