The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
This fixes the following:
- On error, poll must not return without polling, including EBADF, and instead
report POLLHUP/POLLERR/POLLNVAL
- Select must report EBADF if some set contains an invalid FD.
The idea is to move error management to after all select calls, in the
poll/select final treatment. The error is instead recorded in a new `error'
field, and a new SELECT_ERROR bit set.
Thanks Svante Signell for the initial version of the patch.
* hurd/hurdselect.c (SELECT_ERROR): New macro.
(_hurd_select):
- Add `error' field to `d' structures array.
- If a poll descriptor is bogus, set EBADF, but continue with a zero
timeout.
- Go through the whole fd_set, not only until _hurd_dtablesize. Return
EBADF there is any bit set above _hurd_dtablesize.
- Do not request io_select on bogus descriptors (SELECT_ERROR).
- On io_select request error, record the error.
- On io_select bogus reply, use EIO error code.
- On io_select bogus or error reply, record the error.
- Do not destroy reply port for bogus FDs.
- On error, make poll set POLLHUP in the EPIPE case, POLLNVAL in the
EBADF case, or else POLLERR.
- On error, make select simulated readiness.
Rely on servers to implement timeouts, so that very short values (including
0) don't make mach_msg return before valid replies can be received. The
purpose of this scheme is to guarantee a full client-server round-trip,
whatever the timeout value.
This change depends on the new io_select_timeout RPC being implemented by
servers.
* hurd/Makefile (user-interfaces): Add io_reply and io_request.
* hurd/hurdselect.c: Include <sys/time.h>, <hurd/io_request.h> and
<limits.h>.
(_hurd_select): Replace the call to __io_select with either
__io_select_request or __io_select_timeout_request, depending on the
timeout. Count the number of ready descriptors (replies for which at
least one type bit is set). Implement the timeout locally when there is
no file descriptor.
The function attempts to optimize this case by performing one IPC system
call with the timeout included among the parameters, but in the absence
of a reply, it will call mach_msg again with the same timeout later,
effectively doubling the total timeout of the select/poll call.
Remove this optimization for the time being.
* hurd/hurdselect.c (_hurd_select): Always call __io_select with no
timeout.
This removes code which actually never happens, and is already taken
care of in the function.
This is in the second part of select, when the __mach_msg() function
over the portset has returned something else than MACH_MSG_SUCCESS. I
guess in the past the value returned by __mach_msg() was stored in err,
so this code was necessary to set back err to 0, but now it is stored in
msgerr, so err is already still 0 by default. It can thus never contain
MACH_RCV_TIMED_OUT, i.e. the code is dead. The first case mentioned in
the comment is already handled: on time out with no message, err is
already still the default 0. On time out due to poll, err would still be
0, unless some of the io_select RPCs has returned EINTR, in which case
it contains EINTR. If any other io_select RPCs had returned a proper
answer, got!=0, and thus err is set to 0 just below. The code is thus
indeed not useful any more.
MACH_MSG_TYPE_INTEGER_T -> integer_t in sizeof.
Use a union rather than casts to compare mach_msg_type_t as int.
2002-03-25 Roland McGrath <roland@frob.com>
* hurd/hurdchdir.c (_hurd_change_directory_port_from_name): Don't
check off the end of NAME when it's shorter than 2 chars.
Reported by Ognyan Kulev <ogi@fmi.uni-sofia.bg>.
2002-03-17 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/i386/sys/io.h: New file.
* sysdeps/mach/hurd/i386/ioperm.c: New file.
* sysdeps/mach/hurd/i386/Dist: Add them.
* sysdeps/mach/hurd/i386/Versions
(libc: GLIBC_2.2.6): New set, add ioperm.
* sysdeps/mach/configure.in: New check to set HAVE_I386_IO_PERM_MODIFY.
(mach_interface_list): Check for mach_i386.defs.
* config.h.in (HAVE_I386_IO_PERM_MODIFY): #undef it.
* sysdeps/mach/configure: Regenerated.
Use untyped Mach IPC message format.
* sysdeps/mach/hurd/ioctl.c (__ioctl) [! MACH_MSG_TYPE_BIT]: Handle
Handle untyped Mach IPC message formats.
* hurd/catch-exc.c (_S_catch_exception_raise) [EXC_MASK_ALL]:
Expect different argument conventions when this is defined.
[EXC_MASK_ALL] (_S_catch_exception_raise_state): New stub function.
[EXC_MASK_ALL] (_S_catch_exception_raise_state_identity): Likewise.
* hurd/hurdfault.c: Likewise for _hurdsig_fault_catch_exception_*.
[NDR_CHAR_ASCII] (mig_reply_header_t): #define as mig_reply_error_t
for OSF Mach variant.
(faulted): Use mig_reply_error_t for REPLY.
(_hurdsig_fault_init) [EXC_MASK_ALL]: Use EXCEPTION_STATE_IDENTITY
in __thread_set_exception_ports call.
(_hurdsig_fault_init) [MACH_PORT_RECEIVE_STATUS]: Use
__mach_port_set_attributes in place of __mach_port_set_qlimit.
* sysdeps/mach/powerpc/sysdep.h (_MACH_MACHINE_ASM_H): Define this
before include <sysdeps/mach/sysdep.h>, to inhibit <mach/machine/asm.h>
on Darwin, which includes bogons.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* sysdeps/mach/hurd/pselect.c: New file.
* sysdeps/mach/hurd/poll.c: New file.
* hurd/Makefile (routines): Add hurdselect.
* hurd/hurdselect.c: New file.
(_hurd_select): New function, guts taken from ...
* sysdeps/mach/hurd/select.c (__select): ... here.
Now work by just calling _hurd_select.
* hurd/hurd/fd.h: Declare _hurd_select.
1998-12-05 Roland McGrath <roland@baalperazim.frob.com>
* time/strptime.c: Fix unterminated comment in last change.
* argp/argp.h: Add __restrict.
