Add support for MTE to strncmp. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Co-authored-by: Branislav Rankov <branislav.rankov@arm.com>
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
(cherry picked from commit 03e1378f94)
On Fedora 40/x86-64, linker enables --enable-new-dtags by default which
generates DT_RUNPATH instead of DT_RPATH. Unlike DT_RPATH, DT_RUNPATH
only applies to DT_NEEDED entries in the executable and doesn't applies
to DT_NEEDED entries in shared libraries which are loaded via DT_NEEDED
entries in the executable. Some glibc tests have libstdc++.so.6 in
DT_NEEDED, which has libm.so.6 in DT_NEEDED. When DT_RUNPATH is generated,
/lib64/libm.so.6 is loaded for such tests. If the newly built glibc is
older than glibc 2.36, these tests fail with
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_2.36' not found (required by /lib64/libm.so.6)
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by /lib64/libm.so.6)
Pass -Wl,--disable-new-dtags to linker when building glibc tests with
--enable-hardcoded-path-in-tests. This fixes BZ #31719.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 2dcaf70643)
stdio-common/errlist.o.d and stdio-common/errlist.os.d aren't generated
alongside with stdio-common/errlist-compat.h. Don't make them depend on
stdio-common/errlist-compat.h to avoid infinite loop with make-4.4. This
fixes BZ #31330.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
make-4.4 will add long flags to MAKEFLAGS variable:
* WARNING: Backward-incompatibility!
Previously only simple (one-letter) options were added to the MAKEFLAGS
variable that was visible while parsing makefiles. Now, all options
are available in MAKEFLAGS.
This causes locale builds to fail when long options are used:
$ make --shuffle
...
make -C localedata install-locales
make: invalid shuffle mode: '1662724426r'
The change fixes it by passing eash option via whitespace and dashes.
That way option is appended to both single-word form and whitespace
separated form.
While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering
out --long-options. Otherwise options like --shuffle flag enable silent
mode unintentionally. $(silent-make) variable consolidates the checks.
Resolves: BZ# 29564
CC: Paul Smith <psmith@gnu.org>
CC: Siddhesh Poyarekar <siddhesh@gotplt.org>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 2d7ed98add)
Using int may give false results for future dates (timeouts after the
year 2028).
Fixes commit 04a21e050d64a1193a6daab872bca2528bda44b ("CVE-2024-33601,
CVE-2024-33602: nscd: netgroup: Use two buffers in addgetnetgrentX
(bug 31680)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4bbca1a446)
This avoids potential memory corruption when the underlying NSS
callback function does not use the buffer space to store all strings
(e.g., for constant strings).
Instead of custom buffer management, two scratch buffers are used.
This increases stack usage somewhat.
Scratch buffer allocation failure is handled by return -1
(an invalid timeout value) instead of terminating the process.
This fixes bug 31679.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit c04a21e050)
The addgetnetgrentX call in addinnetgrX may have failed to produce
a result, so the result variable in addinnetgrX can be NULL.
Use db->negtimeout as the fallback value if there is no result data;
the timeout is also overwritten below.
Also avoid sending a second not-found response. (The client
disconnects after receiving the first response, so the data stream did
not go out of sync even without this fix.) It is still beneficial to
add the negative response to the mapping, so that the client can get
it from there in the future, instead of going through the socket.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit b048a482f0)
If we failed to add a not-found response to the cache, the dataset
point can be null, resulting in a null pointer dereference.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 7835b00dbc)
Using alloca matches what other caches do. The request length is
bounded by MAXKEYLEN.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 87801a8fd0)
ISO-2022-CN-EXT uses escape sequences to indicate character set changes
(as specified by RFC 1922). While the SOdesignation has the expected
bounds checks, neither SS2designation nor SS3designation have its;
allowing a write overflow of 1, 2, or 3 bytes with fixed values:
'$+I', '$+J', '$+K', '$+L', '$+M', or '$*H'.
Checked on aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit f9dc609e06)
Ffsll function randomly regress by ~20%, depending on how code gets
aligned in memory. Ffsll function code size is 17 bytes. Since default
function alignment is 16 bytes, it can load on 16, 32, 48 or 64 bytes
aligned memory. When ffsll function load at 16, 32 or 64 bytes aligned
memory, entire code fits in single 64 bytes cache line. When ffsll
function load at 48 bytes aligned memory, it splits in two cache line,
hence random regression.
Ffsll function size reduction from 17 bytes to 12 bytes ensures that it
will always fit in single 64 bytes cache line.
This patch fixes ffsll function random performance regression.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 9d94997b5f)
The:
```
if (shared_per_thread > 0 && threads > 0)
shared_per_thread /= threads;
```
Code was accidentally moved to inside the else scope. This doesn't
match how it was previously (before af992e7abd).
This patch fixes that by putting the division after the `else` block.
(cherry picked from commit 084fb31bc2)
On some machines we end up with incomplete cache information. This can
make the new calculation of `sizeof(total-L3)/custom-divisor` end up
lower than intended (and lower than the prior value). So reintroduce
the old bound as a lower bound to avoid potentially regressing code
where we don't have complete information to make the decision.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 8b9a0af8ca)
After:
```
commit af992e7abd
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 7 13:18:01 2023 -0500
x86: Increase `non_temporal_threshold` to roughly `sizeof_L3 / 4`
```
Split `shared` (cumulative cache size) from `shared_per_thread` (cache
size per socket), the `shared_per_thread` *can* be slightly off from
the previous calculation.
Previously we added `core` even if `threads_l2` was invalid, and only
used `threads_l2` to divide `core` if it was present. The changed
version only included `core` if `threads_l2` was valid.
This change restores the old behavior if `threads_l2` is invalid by
adding the entire value of `core`.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 47f7472178)
Current `non_temporal_threshold` set to roughly '3/4 * sizeof_L3 /
ncores_per_socket'. This patch updates that value to roughly
'sizeof_L3 / 4`
The original value (specifically dividing the `ncores_per_socket`) was
done to limit the amount of other threads' data a `memcpy`/`memset`
could evict.
Dividing by 'ncores_per_socket', however leads to exceedingly low
non-temporal thresholds and leads to using non-temporal stores in
cases where REP MOVSB is multiple times faster.
Furthermore, non-temporal stores are written directly to main memory
so using it at a size much smaller than L3 can place soon to be
accessed data much further away than it otherwise could be. As well,
modern machines are able to detect streaming patterns (especially if
REP MOVSB is used) and provide LRU hints to the memory subsystem. This
in affect caps the total amount of eviction at 1/cache_associativity,
far below meaningfully thrashing the entire cache.
As best I can tell, the benchmarks that lead this small threshold
where done comparing non-temporal stores versus standard cacheable
stores. A better comparison (linked below) is to be REP MOVSB which,
on the measure systems, is nearly 2x faster than non-temporal stores
at the low-end of the previous threshold, and within 10% for over
100MB copies (well past even the current threshold). In cases with a
low number of threads competing for bandwidth, REP MOVSB is ~2x faster
up to `sizeof_L3`.
The divisor of `4` is a somewhat arbitrary value. From benchmarks it
seems Skylake and Icelake both prefer a divisor of `2`, but older CPUs
such as Broadwell prefer something closer to `8`. This patch is meant
to be followed up by another one to make the divisor cpu-specific, but
in the meantime (and for easier backporting), this patch settles on
`4` as a middle-ground.
Benchmarks comparing non-temporal stores, REP MOVSB, and cacheable
stores where done using:
https://github.com/goldsteinn/memcpy-nt-benchmarks
Sheets results (also available in pdf on the github):
https://docs.google.com/spreadsheets/d/e/2PACX-1vS183r0rW_jRX6tG_E90m9qVuFiMbRIJvi5VAE8yYOvEOIEEc3aSNuEsrFbuXw5c3nGboxMmrupZD7K/pubhtml
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit af992e7abd)
The signal handler installed in the ELF constructor cannot easily
be removed again (because the program may have changed handlers
in the meantime). Mark the object as NODELETE so that the registered
handler function is never unloaded.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 23ee92deea)
Previous implementation was adjusting length (rsi) to match
bytes (eax), but since there is no bound to length this can cause
overflow.
Fix is to just convert the byte-count (eax) to length by dividing by
sizeof (wchar_t) before the comparison.
Full check passes on x86-64 and build succeeds w/ and w/o multiarch.
(cherry picked from commit b0969fa53a)
Since strchr-avx2.S updated by
commit 1f745ecc21
Author: noah <goldstein.w.n@gmail.com>
Date: Wed Feb 3 00:38:59 2021 -0500
x86-64: Refactor and improve performance of strchr-avx2.S
uses sarx:
c4 e2 72 f7 c0 sarx %ecx,%eax,%eax
for strchr-avx2 family functions, require BMI2 in ifunc-impl-list.c and
ifunc-avx2.h.
This fixes BZ #29611.
(cherry picked from commit 83c5b36822)
This tests for a bug that was introduced in commit edc1686af0 ("vfprintf:
Reuse work_buffer in group_number") and fixed as a side effect of commit
6caddd34bd ("Remove most vfprintf width/precision-dependent allocations
(bug 14231, bug 26211).").
(cherry picked from commit ca6466e8be)
A recent GCC mainline change introduces errors of the form:
vfprintf-internal.c: In function 'group_number':
vfprintf-internal.c:2093:15: error: 'memmove' specified bound between 9223372036854775808 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]
2093 | memmove (w, s, (front_ptr -s) * sizeof (CHAR_T));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a genuine bug in the glibc code: s > front_ptr is always true
at this point in the code, and the intent is clearly for the
subtraction to be the other way round. The other arguments to the
memmove call here also appear to be wrong; w and s point just *after*
the destination and source for copying the rest of the number, so the
size needs to be subtracted to get appropriate pointers for the
copying. Adjust the memmove call to conform to the apparent intent of
the code, so fixing the -Wstringop-overflow error.
Now, if the original code were ever executed, a buffer overrun would
result. However, I believe this code (introduced in commit
edc1686af0, "vfprintf: Reuse work_buffer
in group_number", so in glibc 2.26) is unreachable in prior glibc
releases (so there is no need for a bug in Bugzilla, no need to
consider any backports unless someone wants to build older glibc
releases with GCC 12 and no possibility of this buffer overrun
resulting in a security issue).
work_buffer is 1000 bytes / 250 wide characters. This case is only
reachable if an initial part of the number, plus a grouped copy of the
rest of the number, fail to fit in that space; that is, if the grouped
number fails to fit in the space. In the wide character case,
grouping is always one wide character, so even with a locale (of which
there aren't any in glibc) grouping every digit, a number would need
to occupy at least 125 wide characters to overflow, and a 64-bit
integer occupies at most 23 characters in octal including a leading 0.
In the narrow character case, the multibyte encoding of the grouping
separator would need to be at least 42 bytes to overflow, again
supposing grouping every digit, but MB_LEN_MAX is 16. So even if we
admit the case of artificially constructed locales not shipped with
glibc, given that such a locale would need to use one of the character
sets supported by glibc, this code cannot be reached at present. (And
POSIX only actually specifies the ' flag for grouping for decimal
output, though glibc acts on it for other bases as well.)
With binary output (if you consider use of grouping there to be
valid), you'd need a 15-byte multibyte character for overflow; I don't
know if any supported character set has such a character (if, again,
we admit constructed locales using grouping every digit and a grouping
separator chosen to have a multibyte encoding as long as possible, as
well as accepting use of grouping with binary), but given that we have
this code at all (clearly it's not *correct*, or in accordance with
the principle of avoiding arbitrary limits, to skip grouping on
running out of internal space like that), I don't think it should need
any further changes for binary printf support to go in.
On the other hand, support for large sizes of _BitInt in printf (see
the N2858 proposal) *would* require something to be done about such
arbitrary limits (presumably using dynamic allocation in printf again,
for sufficiently large _BitInt arguments only - currently only
floating-point uses dynamic allocation, and, as previously discussed,
that could actually be replaced by bounded allocation given smarter
code).
Tested with build-many-glibcs.py for aarch64-linux-gnu (GCC mainline).
Also tested natively for x86_64.
(cherry picked from commit db6c4935fa)
The vfprintf implementation (used for all printf-family functions)
contains complicated logic to allocate internal buffers of a size
depending on the width and precision used for a format, using either
malloc or alloca depending on that size, and with consequent checks
for size overflow and allocation failure.
As noted in bug 26211, the version of that logic used when '$' plus
argument number formats are in use is missing the overflow checks,
which can result in segfaults (quite possibly exploitable, I didn't
try to work that out) when the width or precision is in the range
0x7fffffe0 through 0x7fffffff (maybe smaller values as well in the
wprintf case on 32-bit systems, when the multiplication by sizeof
(CHAR_T) can overflow).
All that complicated logic in fact appears to be useless. As far as I
can tell, there has been no need (outside the floating-point printf
code, which does its own allocations) for allocations depending on
width or precision since commit
3e95f6602b ("Remove limitation on size
of precision for integers", Sun Sep 12 21:23:32 1999 +0000). Thus,
this patch removes that logic completely, thereby fixing both problems
with excessive allocations for large width and precision for
non-floating-point formats, and the problem with missing overflow
checks with such allocations. Note that this does have the
consequence that width and precision up to INT_MAX are now allowed
where previously INT_MAX / sizeof (CHAR_T) - EXTSIZ or more would have
been rejected, so could potentially expose any other overflows where
the value would previously have been rejected by those removed checks.
I believe this completely fixes bugs 14231 and 26211.
Excessive allocations are still possible in the floating-point case
(bug 21127), as are other integer or buffer overflows (see bug 26201).
This does not address the cases where a precision larger than INT_MAX
(embedded in the format string) would be meaningful without printf's
return value overflowing (when it's used with a string format, or %g
without the '#' flag, so the actual output will be much smaller), as
mentioned in bug 17829 comment 8; using size_t internally for
precision to handle that case would be complicated by struct
printf_info being a public ABI. Nor does it address the matter of an
INT_MIN width being negated (bug 17829 comment 7; the same logic
appears a second time in the file as well, in the form of multiplying
by -1). There may be other sources of memory allocations with malloc
in printf functions as well (bug 24988, bug 16060). From inspection,
I think there are also integer overflows in two copies of "if ((width
-= len) < 0)" logic (where width is int, len is size_t and a very long
string could result in spurious padding being output on a 32-bit
system before printf overflows the count of output characters).
Tested for x86-64 and x86.
(cherry picked from commit 6caddd34bd)
This is an updated version of a previous patch [1] with the
following changes:
- Use compiler overflow builtins on done_add_func function.
- Define the scratch +utstring_converted_wide_string using
CHAR_T.
- Added a testcase and mention the bug report.
Both default and wide printf functions might leak memory when
manipulate multibyte characters conversion depending of the size
of the input (whether __libc_use_alloca trigger or not the fallback
heap allocation).
This patch fixes it by removing the extra memory allocation on
string formatting with conversion parts.
The testcase uses input argument size that trigger memory leaks
on unpatched code (using a scratch buffer the threashold to use
heap allocation is lower).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://sourceware.org/pipermail/libc-alpha/2017-June/082098.html
(cherry picked from commit 3cc4a8367c)
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Otherwise the test fails with certain container runtimes.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 5b8e7980c5)
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 23e0e8f5f1)
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit fb7bff12e8)
It is a wrapper for Linux clone syscall, to simplify the call to the
use only the most common arguments and remove architecture specific
handling (such as ia64 different name and signature).
(cherry picked from commit de8995a2a0)
Previously TEST_NAME was passing a function pointer. This didn't fail
because of the -Wno-error flag (to allow for overflow sizes passed
to strncmp/wcsncmp)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit b98d0bbf74)
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 7835d611af)
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c627209832)
Verify that wcsncmp (L("abc"), L("abd"), SIZE_MAX) == 0. The new test
fails without
commit ddf0992cf5
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:21 2022 -0600
x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755]
and
commit 7e08db3359
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:28 2022 -0600
x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755]
This is for BZ #28755.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit aa5a720056)
commit 6f573a27b6
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 23 01:19:34 2021 -0400
x86-64: Add wcslen optimize for sse4.1
added wcsnlen-sse4.1 to the wcslen ifunc implementation list. Since the
random value in the the RSI register is larger than the wide-character
string length in the existing wcslen test, it didn't trigger the wcslen
test failure. Add a test to force 0 into the RSI register before calling
wcslen.
(cherry picked from commit a6e7c3745d)
The following commit
commit 6f573a27b6
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 23 01:19:34 2021 -0400
x86-64: Add wcslen optimize for sse4.1
Added wcsnlen-sse4.1 to the wcslen ifunc implementation list and did
not add wcslen-sse4.1 to wcslen ifunc implementation list. This commit
fixes that by removing wcsnlen-sse4.1 from the wcslen ifunc
implementation list and adding wcslen-sse4.1 to the ifunc
implementation list.
Testing:
test-wcslen.c, test-rsi-wcslen.c, and test-rsi-strlen.c are passing as
well as all other tests in wcsmbs and string.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 0679442def)
From
https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html
* Intel TSX will be disabled by default.
* The processor will force abort all Restricted Transactional Memory (RTM)
transactions by default.
* A new CPUID bit CPUID.07H.0H.EDX[11](RTM_ALWAYS_ABORT) will be enumerated,
which is set to indicate to updated software that the loaded microcode is
forcing RTM abort.
* On processors that enumerate support for RTM, the CPUID enumeration bits
for Intel TSX (CPUID.07H.0H.EBX[11] and CPUID.07H.0H.EBX[4]) continue to
be set by default after microcode update.
* Workloads that were benefited from Intel TSX might experience a change
in performance.
* System software may use a new bit in Model-Specific Register (MSR) 0x10F
TSX_FORCE_ABORT[TSX_CPUID_CLEAR] functionality to clear the Hardware Lock
Elision (HLE) and RTM bits to indicate to software that Intel TSX is
disabled.
1. Add RTM_ALWAYS_ABORT to CPUID features.
2. Set RTM usable only if RTM_ALWAYS_ABORT isn't set. This skips the
string/tst-memchr-rtm etc. testcases on the affected processors, which
always fail after a microcde update.
3. Check RTM feature, instead of usability, against /proc/cpuinfo.
This fixes BZ #28033.
(cherry picked from commit ea8e465a6b)
This commit adds tests for a bug in the wide char variant of the
functions where the implementation may assume that maxlen for wcsnlen
or n for wmemchr/strncat will not overflow when multiplied by
sizeof(wchar_t).
These tests show the following implementations failing on x86_64:
wcsnlen-sse4_1
wcsnlen-avx2
wmemchr-sse2
wmemchr-avx2
strncat would fail as well if it where on a system that prefered
either of the wcsnlen implementations that failed as it relies on
wcsnlen.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit da5a6fba0f)
No bug. This commit optimizes strlen-evex.S. The
optimizations are mostly small things but they add up to roughly
10-30% performance improvement for strlen. The results for strnlen are
bit more ambiguous. test-strlen, test-strnlen, test-wcslen, and
test-wcsnlen are all passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 4ba6558684)
This commit fixes the bug mentioned in the previous commit.
The previous implementations of wmemchr in these files relied
on maxlen * sizeof(wchar_t) which was not guranteed by the standard.
The new overflow tests added in the previous commit now
pass (As well as all the other tests).
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit a775a7a3eb)
No bug. This comment adds the ifunc / build infrastructure
necessary for wcslen to prefer the sse4.1 implementation
in strlen-vec.S. test-wcslen.c is passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 6f573a27b6)
Since strlen.S contains SSE2 version of strlen/strnlen and SSE4.1
version of wcslen/wcsnlen, move strlen.S to multiarch/strlen-vec.S
and include multiarch/strlen-vec.S from SSE2 and SSE4.1 variants.
This also removes the unused symbols, __GI___strlen_sse2 and
__GI___wcsnlen_sse4_1.
(cherry picked from commit a0db678071)
An unknown vector operation occurred in commit 2a76821c30. Fixed it
by using "ymm{k1}{z}" but not "ymm {k1} {z}".
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 6ea916adfa)
