Originally the public interface for getdents64 was declared in
<unistd.h> in 51ea67d548. Later, b8b3d5a14e moved it to <dirent.h>.
Fixes: b8b3d5a14e ("Linux: Move getdents64 to <dirent.h>")
Building the test cases in parallel might make tst-strftime2 and
tst-strftime3 fail. Simply re-running the test case (or building
serially) makes the problem go away. This patch adds the necessary
dependency to allow parallel builds in the time subdirectory.
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Once wordexp switches to posix_spawn, testing for command execution
based on fork handlers will not work anymore. Therefore, move these
subtests into a new test, posix/tst-wordexp-nocmd, which uses a
different form of command execution detection, based on PID
namespaces.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_var_init is used to patch the read-only data section after
relocation. Several architectures use this to update
GLRO(page_size) with the correct value for the static dlopen case,
where _rtld_global_ro has not been initialized by the dynamic
loader.
RISC-V does not need this. The RISC-V Instruction Set Manual,
Volume II: Privileged Architecture, Document Version
20190608-Priv-MSU-Ratified says this:
After much deliberation, we have settled on a conventional
page size of 4 KiB for both RV32 and RV64. We expect this
decision to ease the porting of low-level runtime software
and device drivers. The TLB reach problem is ameliorated by
transparent superpage support in modern operating systems
[2]. Additionally, multi-level TLB hierarchies are quite
inexpensive relative to the multi-level cache hierarchies
whose address space they map.
[2] Juan Navarro, Sitaram Iyer, Peter Druschel, and
Alan Cox. Practical, transparent operating system support
for superpages. SIGOPS Oper. Syst. Rev., 36(SI):89–104,
December 2002.
This means that the initialization of
_rtld_global_ro._dl_page_size in elf/rtld.c with EXEC_PAGESIZE
is sufficient for RISC-V.
Commit a42faf59d6 ("Fix BZ #16634.")
attempted to fix a TLS modid consistency issue by adding additional
checks to the open_verify function. However, this is fragile
because open_verify cannot reliably predict whether
_dl_map_object_from_fd will later fail in the more complex cases
(such as memory allocation failures). Therefore, this commit
assigns the TLS modid as late as possible. At that point, the link
map pointer will eventually be passed to _dl_close, which will undo
the TLS modid assignment.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
If the loader is invoked explicitly and loads the main executable,
it stores the file ID of the main executable in l_file_id. This
information is not available if the main excutable is loaded by the
kernel, so this is another case where the two cases differ.
This enhances commit 23d2e5faf0
("elf: Self-dlopen failure with explict loader invocation
[BZ #24900]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
To work around <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91691>
for RV32, we recently disabled -Wmaybe-uninitialized for some inline
functions in inet/net-internal.h, as included by sunrpc/clnt_udp.c.
The same error has now appeared with current GCC trunk for MIPS, in a
form that is located at the definition of the variable in question and
so unaffected by the disabling in inet/net-internal.h. Thus, this
patch adds the same disabling around the definition of that variable,
to cover the MIPS case.
Tested with build-many-glibcs.py (compilers and glibcs stages) for
mips64-linux-gnu with GCC mainline.
* sunrpc/clnt_udp.c: Include <libc-diag.h>.
(clntudp_call): Disable -Wmaybe-uninitialized around declaration
of total_deadline.
Commit 69fd157a3 "time: Add padding for the timespec if required"
caused a breakage in the glibc tests as the endian.h include file was
kept in the networking headers while the __USE_MISC #ifdefs had been
removed. This resulted in namespace violations in the networking
headers.
This patche restores the __USE_MISC conditionals in endian.h to fix the
test failures.
* string/endian.h: Restore the __USE_MISC conditionals.
string/tester.c contains code that correctly triggers various GCC
warnings about dubious uses of string functions (uses that are being
deliberately tested there), and duly disables those warnings around
the relevant code.
A change in GCC mainline resulted in this code failing to compile with
a -Warray-bounds error, despite the location with the error having
-Warray-bounds already disabled. This has been reported as
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91890>. This patch
avoids that problem and possible future issues with these diagnostics
by moving all the warning disabling in this file to top level, as
suggested by Florian in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00033.html>, rather
than only doing it locally around specific function calls.
Tested with build-many-glibcs.py for aarch64-linux-gnu with GCC
mainline (with only the conform/ failures noted in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00043.html>).
* string/tester.c: Ignore -Warray-bounds and
-Wmemset-transposed-args at top level.
[__GNUC_PREREQ (7, 0)]: Ignore -Wrestrict and -Wstringop-overflow=
at top level.
[__GNUC_PREREQ (8, 0)]: Ignore -Wstringop-truncation at top level.
(test_stpncpy): Do not ignore warnings here.
(test_strncat): Likewise.
(test_strncpy): Likewise.
(test_memset): Likewise.
The HURD requires explicit inclusion of <bits/types/struct_timeval.h> to use
struct timeval in ./include/time.h.
For this particular glibc port, the proper header hasn't been included before
inclusion of time.h.
Tested with build-many-glibcs.py with i686-gnu and x86_64-linux-gnu:
build-many-glibcs.py /home/lukma/work/glibc/glibc-many-build --keep all compilers i686-gnu
build-many-glibcs.py /home/lukma/work/glibc/glibc-many-build --keep all glibcs i686-gnu
Also run of xcheck on x86_64:
./src/configure --prefix=/usr
make PARALLELMFLAGS="-j12" && make xcheck PARALLELMFLAGS="-j12"
* include/time.h: Add #include <bits/types/struct_timeval.h>
Since at least POWER8, there is no performance advantage to entering
"Ignore Exceptions Mode", and doing so conditionally requires
- the conditional logic, and
- a system call.
Make it a no-op for uses within glibc.
This patch adds the ability to run debugglibc.sh's inferior program with
arguments specified on the command line. This enables convenient debugging
of non-testcase programs such as iconv/iconv_prog or other dynamically
linked programs. Program arguments may be passed using `--' as a separator.
For example:
$ ./debugglibc.sh -b iconv -- iconv/iconv_prog -f ASCII -t UTF-8 input.txt
If we are running on a 32-bit system with a 64-bit time_t we need to
ensure there is padding around the tv_nsec variable. This is requried as
the timespec is #defined to the __timespec64 struct.
* time/bits/types/struct_timespec.h: Add padding for the timespec if
required.
With only two exceptions (sys/types.h and sys/param.h, both of which
historically might have defined BYTE_ORDER) the public headers that
include <endian.h> only want to be able to test __BYTE_ORDER against
__*_ENDIAN.
This patch creates a new bits/endian.h that can be included by any
header that wants to be able to test __BYTE_ORDER and/or
__FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs
__LONG_LONG_PAIR. It only defines macros in the implementation
namespace.
The existing bits/endian.h (which could not be included independently
of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER)
is renamed to bits/endianness.h. I also took the opportunity to
canonicalize the form of this header, which we are stuck with having
one copy of per architecture. Since they are so short, this means git
doesn’t understand that they were renamed from existing headers, sigh.
endian.h itself is a nonstandard header and its only remaining use
from a standard header is guarded by __USE_MISC, so I dropped the
__USE_MISC conditionals from around all of the public-namespace things
it defines. (This means, an application that requests strict library
conformance but includes endian.h will still see the definition of
BYTE_ORDER.)
A few changes to specific bits/endian(ness).h variants deserve
mention:
- sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to
sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did
have selectable endianness, but we have assembly code in
sysdeps/ia64 that assumes it’s little-endian, so there is no reason
to treat the ia64 endianness.h as linux-specific.
- The C-SKY port does not fully support big-endian mode, the compile
will error out if __CSKYBE__ is defined.
- The PowerPC port had extra logic in its bits/endian.h to detect a
broken compiler, which strikes me as unnecessary, so I removed it.
- The only files that defined __FLOAT_WORD_ORDER always defined it to
the same value as __BYTE_ORDER, so I removed those definitions.
The SH bits/endian(ness).h had comments inconsistent with the
actual setting of __FLOAT_WORD_ORDER, which I also removed.
- I *removed* copyright boilerplate from the few bits/endian(ness).h
headers that had it; these files record a single fact in a fashion
dictated by an external spec, so I do not think they are copyrightable.
As long as I was changing every copy of ieee754.h in the tree, I
noticed that only the MIPS variant includes float.h, because it uses
LDBL_MANT_DIG to decide among three different versions of
ieee854_long_double. This patch makes it not include float.h when
GCC’s intrinsic __LDBL_MANT_DIG__ is available.
* string/endian.h: Unconditionally define LITTLE_ENDIAN,
BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping
macros only on !__ASSEMBLER__. Move the definitions of
__BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER,
and __LONG_LONG_PAIR to...
* string/bits/endian.h: ...this new file, which includes
the renamed header bits/endianness.h for the definition of
__BYTE_ORDER and possibly __FLOAT_WORD_ORDER.
* string/Makefile: Install bits/endianness.h.
* include/bits/endian.h: New wrapper.
* bits/endian.h: Rename to bits/endianness.h.
Add multiple-include guard. Rewrite the comment explaining what
the machine-specific variants of this file should do.
* sysdeps/unix/sysv/linux/ia64/bits/endian.h:
Move to sysdeps/ia64.
* sysdeps/aarch64/bits/endian.h
* sysdeps/alpha/bits/endian.h
* sysdeps/arm/bits/endian.h
* sysdeps/csky/bits/endian.h
* sysdeps/hppa/bits/endian.h
* sysdeps/ia64/bits/endian.h
* sysdeps/m68k/bits/endian.h
* sysdeps/microblaze/bits/endian.h
* sysdeps/mips/bits/endian.h
* sysdeps/nios2/bits/endian.h
* sysdeps/powerpc/bits/endian.h
* sysdeps/riscv/bits/endian.h
* sysdeps/s390/bits/endian.h
* sysdeps/sh/bits/endian.h
* sysdeps/sparc/bits/endian.h
* sysdeps/x86/bits/endian.h:
Rename to endianness.h; canonicalize form of file; remove
redundant definitions of __FLOAT_WORD_ORDER.
* sysdeps/powerpc/bits/endianness.h: Remove logic to check for
broken compilers.
* ctype/ctype.h
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h
* sysdeps/ia64/ieee754.h
* sysdeps/ieee754/ieee754.h
* sysdeps/ieee754/ldbl-128/ieee754.h
* sysdeps/ieee754/ldbl-128ibm/ieee754.h
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
* sysdeps/mips/ieee754/ieee754.h
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
* sysdeps/nptl/pthread.h
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
* sysdeps/sparc/sparc32/ieee754.h
* sysdeps/unix/sysv/linux/generic/bits/stat.h
* sysdeps/unix/sysv/linux/generic/bits/statfs.h
* sysdeps/unix/sysv/linux/sys/acct.h
* wctype/bits/wctype-wchar.h:
Include bits/endian.h, not endian.h.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h.
* sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__
in ifdefs, instead of LDBL_MANT_DIG. Only include float.h
when __LDBL_MANT_DIG__ is not predefined, in which case
define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
Sync these values with CLDR and langtable as much as possible. Add
missing values.
If possible, take the values from CLDR, if CLDR does not have it,
take it from langtable. The values from langtable which are not from
CLDR are from Wikipedia or native speakers.
This patch makes build-many-glibcs.py default to binutils 2.33 branch.
Tested with build-many-glibcs.py (compilers and glibcs builds).
* scripts/build-many-glibcs.py (Context.checkout): Default
binutils version to 2.33 branch.
Those functions allow easy conversion between Y2038 safe struct
__timespec64 and other time related data structures (like struct timeval
or struct timespec).
* include/time.h (valid_timeval_to_timespec64): Add.
* include/time.h (valid_timespec_to_timespec64): Likewise.
* include/time.h (valid_timespec64_to_timespec): Likewise.
* include/time.h (valid_timespec64_to_timeval): Likewise.
The Linux 5.3 uapi headers have some rearrangement relating to MAP_*
constants, which includes the effect of adding definitions of MAP_SYNC
on powerpc and sparc. This patch updates the corresponding glibc
bits/mman.h headers accordingly, and updates the Linux kernel version
number in tst-mman-consts.py to reflect that these constants are now
current with that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC]
(MAP_SYNC): New macro.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC]
(MAP_SYNC): Likewise.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.3.
This patch adds a new make rule that generates a helper script for
debugging glibc test cases. The new script, debugglibc.sh, is similar
to testrun.sh, in the sense that it allows the execution of the
specified test case, however, it opens the test case in GDB, setting the
library path the same way that testrun.sh does. The commands are based
on the instructions on the wiki for glibc debugging [1,2].
By default, the script tells GDB to load the test case for symbol
information, so that, when a breakpoint is hit, the call stack is
displayed correctly (instead of printing lots of '??'s). For instance,
after running 'make' and 'make check', one could do the following:
$ ./debugglibc.sh nptl/tst-exec1 -b pthread_join
Reading symbols from /home/gabriel/build/powerpc64le/glibc//elf/ld.so...done.
Breakpoint 1 at 0x1444
add symbol table from file "nptl/tst-exec1"
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/home/gabriel/build/powerpc64le/glibc//nptl_db/libthread_db.so.1".
Breakpoint 1, 0x00007ffff7fb1444 in _dl_start_user () from /home/gabriel/build/powerpc64le/glibc/elf/ld.so
Breakpoint 2 at 0x7ffff7f49d48: file pthread_join.c, line 23.
Notice that the script will always start GDB with the program running
and halted at _dl_start_user. So, in order to reach the actual
breakpoint of interest, one should hit 'c', not 'r':
>>> c
Continuing.
[New Thread 0x7ffff7d1f180 (LWP 76443)]
[Switching to Thread 0x7ffff7d1f180 (LWP 76443)]
Thread 2 "ld.so" hit Breakpoint 2, __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
24 return __pthread_timedjoin_ex (threadid, thread_return, NULL, true);
Then inspect the call stack with 'bt', as usual, and see symbols from
both the test case and from the libraries themselves:
>>> bt
#0 __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
#1 0x0000000010001f4c in tf (arg=<optimized out>) at tst-exec1.c:37
#2 0x00007ffff7f487e8 in start_thread (arg=0x7ffff7510000) at pthread_create.c:479
#3 0x00007ffff7e523a8 in clone () at ../sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S:82
Tested for powerpc64le and x86_64.
[1] https://sourceware.org/glibc/wiki/Debugging/Loader_Debugging
[2] https://sourceware.org/glibc/wiki/Testing/Builds#Required_gdb_setup
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
fesetenv_mode is used variously to write the FPSCR exception enable
bits and rounding mode bits. These are referred to as the control
bits in the POWER ISA. Change the name to be reflective of its
current and expected use, and match up well with fegetenv_control.
libc_feholdsetround_noex_ppc_ctx currently performs:
1. Read FPSCR, save to context.
2. Create new FPSCR value: clear enables and set new rounding mode.
3. Write new value to FPSCR.
Since other bits just pass through, there is no need to write them.
Instead, write just the changed values (enables and rounding mode),
which can be a bit more efficient.
fegetenv_status is used variously to retrieve the FPSCR exception enable
bits, rounding mode bits, or both. These are referred to as the control
bits in the POWER ISA. FPSCR status bits are also returned by the
'mffs' and 'mffsl' instructions, but they are uniformly ignored by all
uses of fegetenv_status. Change the name to be reflective of its
current and expected use.
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
On POWER9, use more efficient means to update the 2-bit rounding mode
via the 'mffscrn' instruction (instead of two 'mtfsb0/1' instructions
or one 'mtfsfi' instruction that modifies 4 bits).
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
ROUND_TO_ODD and a couple of other places use libc_feupdateenv_test to
restore the rounding mode and exception enables, preserve exception flags,
and test whether given exception(s) were generated.
If the exception flags haven't changed, then it is sufficient and a bit
more efficient to just restore the rounding mode and enables, rather than
writing the full Floating-Point Status and Control Register (FPSCR).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
fenv_private.h includes unused functions, magic macro constants, and
some replicated common code fragments.
Remove unused functions, replace magic constants with constants from
fenv_libc.h, and refactor replicated code.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
This patch adds the new TCP_TX_DELAY constant from Linux 5.3 to
sysdeps/gnu/netinet/tcp.h.
Tested for x86_64.
* sysdeps/gnu/netinet/tcp.h (TCP_TX_DELAY): New macro.
This type is a glibc's "internal" type similar to struct timespec but
whose tv_sec field is a __time64_t rather than a time_t, which makes it
Y2038-proof and usable to pass syscalls between user code and Y2038-proof
kernel.
To support passing this structure to the kernel - the unnamed 32 bit
padding bit-field has been introduced. The placement of it depends on
the endianness of the SoC.
Tested on x86_64 and ARM.
It moves the missing CFLAGS from rt/Makefile to time/Makefile missing
from 7b5af2d8f2 (Finish move of clock_* functions to libc. [BZ #24959]).
Checked on powerpc64le-linux-gnu.
* rt/Makefile (CFLAGS-clock_nanosleep.c): Move to ...
* time/Makefile (CFLAGS-clock_nanosleep.c): ... here.
The total_deadline variable inside the clntudp_call() function inside
sunrpc/clnt_udp.c can cause uninitalised variable warnings when building
with GCC 8.3 or 9.2 on a platform with a 64-bit tv_nsec on a 32-bit
architecture. To fix the warning let's use the DIAG_* macros to hide the
warning.
A GCC bug case has also been submitted:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91691
2019-09-24 Alistair Francis <alistair.francis@wdc.com>
* inet/net-internal.h: Fix uninitalised clntudp_call() variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Co-authored-by: Gabriel F. T. Gomes <gabriel@inconstante.net.br>
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.net.br>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
The utility of a ChangeLog file has been discussed in various mailing
list threads and GNU Tools Cauldrons in the past years and the general
consensus is that while the file may have been very useful in the past
when revision control did not exist or was not as powerful as it is
today, it's current utility is fast diminishing. Further, the
ChangeLog format gets in the way of modernisation of processes since
it almost always results in rewriting of a commit, thus preventing use
of any code review tools to automatically manage patches in the glibc
project.
There is consensus in the glibc community that documentation of why a
change was done (i.e. a detailed description in a git commit) is more
useful than what changed (i.e. a ChangeLog entry) since the latter can
be deduced from the patch. The GNU community would however like to
keep the option of ascertaining what changed through a ChangeLog-like
output and as a compromise, it was proposed that a script be developed
that generates this output.
The script below is the result of these discussions. This script
takes two git revisions references as input and generates the git log
between those revisions in a form that resembles a ChangeLog. Its
capabilities and limitations are listed in a comment in the script.
On a high level it is capable of parsing C code and telling what
changed at the top level, but not within constructs such as functions.
Design
------
At a high level, the script analyses the raw output of a VCS, parses
the source files that have changed and attempts to determine what
changed. The script driver needs three distinct components to be
fully functional for a repository:
- A vcstocl_quirks.py file that helps it parse weird patterns in
sources that may result from preprocessor defines.
- A VCS plugin backend; the git backend is implemented for glibc
- A programming language parser plugin. C is currently implemented.
Additional programming language parsers can be added to give more
detailed output for changes in those types of files.
For input in languages other than those that have a parser, the script
only identifies if a file has been added, removed, modified,
permissions changed, etc. but cannot understand the change in content.
The C Parser
------------
The C parser is capable of parsing C programs with preprocessor macros
in place, as if they were part of the language. This presents some
challenges with parsing code that expands macros on the fly and to
help work around that, a vcstocl_quirks.py file has transformations to
ease things.
The C parser currently can identify macro definitions and scopes and
all global and static declarations and definitions. It cannot parse
(and compare) changes inside functions yet, it could be a future
enhancement if the need for it arises.
Testing
-------
The script has been tested with the glibc repository up to glibc-2.29
and also in the past with emacs. While it would be ideal to have
something like this in a repository like gnulib, that should not be a
bottleneck for glibc to start using this, so this patch proposes to
add these scripts into glibc.
And here is (hopefully!) one of the last ChangeLog entries we'd have
to write for glibc:
* scripts/gitlog_to_changelog.py: New script to auto-generate
ChangeLog.
* scripts/vcs_to_changelog/frontend_c.py: New file.
* scripts/vcs_to_changelog/misc_util.py: New file.
* scripts/vcs_to_changelog/vcs_git.py: New file.
* scripts/vcs_to_changelog/vcstocl_quirks.py: Likewise.
SET_RESTORE_ROUND brackets a block of code, temporarily setting and
restoring the rounding mode and letting everything else, including
exceptions generated within the block, pass through.
On powerpc, the current code clears the exception enables, which will hide
exceptions generated within the block. This issue was introduced by me
in commit e905212627.
Fix this by not clearing exception enable bits in the prologue.
Also, since we are no longer changing the enable bits in either the
prologue or the epilogue, there is no need to test for entering/exiting
non-stop mode.
Also, optimize the prologue get/save/set rounding mode operations for
POWER9 and later by using 'mffscrn' when possible.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Fixes: e905212627
2019-09-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_and_set_rn): New.
(__fe_mffscrn): New.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc_ctx):
Do not clear enable bits, remove obsolete code, use
fegetenv_and_set_rn.
(libc_feresetround_ppc): Remove obsolete code, use
fegetenv_and_set_rn.
On i686-gnu the build is broken:
In file included from support_ptrace.c:22:
../include/sys/prctl.h:2:15: fatal error: sys/prctl.h: No such file or directory
#include_next <sys/prctl.h>
This patch just removes the unused prctl.h inclusion.
ChangeLog:
* support/support_ptrace.c: Remove inclusion of sys/prctl.h.
Use macro _HP_TIMING_S390_H instead of _HP_TIMING_H
in s390 specific hp-timing.h
ChangeLog:
* sysdeps/s390/hp-timing.h (_HP_TIMING_H): Undefine.
(_HP_TIMING_S390_H): Define.
This patch updates syscall-names.list for Linux 5.3, adding two new
syscalls.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.3.
(clone3): New syscall.
(pidfd_open): Likewise.
This patch makes build-many-glibcs.py use Linux 5.3.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 5.3.
This patch adds support for HP_TIMING_NOW if we build at least
with -march=z10 -mzarch. Otherwise we are still using the
generic hp-timing.h.
ChangeLog:
* sysdeps/s390/hp-timing.h: New file.
Building glibc for RISC-V with Linux 5.3 kernel headers fails because
<linux/sched.h>, included in vfork.S for CLONE_* constants, contains a
structure definition not safe for inclusion in assembly code.
All other architectures already avoid use of that header in vfork.S,
either defining the CLONE_* constants locally or embedding the
required values directly in the relevant instruction, where they
implement vfork using the clone syscall (see the implementations for
aarch64, ia64, mips and nios2). This patch makes the RISC-V version
define the constants locally like the other architectures.
Tested build for all three RISC-V configurations in
build-many-glibcs.py with Linux 5.3 headers.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Do not include
<linux/sched.h>.
(CLONE_VM): New macro.
(CLONE_VFORK): Likewise.
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
There is no need to sparc64 provide an arch-specific implementation to
route to POSIX one (which uses gettimeofday). Linux one already handles
the case for architecture that does not have __NR_time.
No semantic changes, checked against a build for sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/sparc/sparc64/time.c: Remove file.
This patch consolidates the mips, mips64, and mips64-n32
INTERNAL_VSYSCALL_CALL on a single implementation.
No semantic changes. I checked against a build for mips-linux-gnu,
mips64-linux-gnu, and mips64-n32-linux-gnu.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Remove.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_VSYSCALL_CALL):
New macro.
