IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
We cannot use fnegd in this code, as fnegd was added in v9.
Only fnegs exists in v8 and earlier.
[BZ #15985]
* sysdeps/sparc/sparc32/fpu/s_fdim.S (__fdim): Do not use fnegd
on pre-v9 cpus, use a fnegs+fmovs sequence instead.
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
[BZ #15442] This adds support for the inverse interpretation of the
quiet bit of IEEE 754 floating-point NaN data that some processors
use. This includes in particular MIPS architecture processors; the
payload used for the canonical qNaN encoding is updated accordingly
so as not to interfere with the quiet bit.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Use %g0 as second
argument of CAS if possible.
* sysdeps/sparc/sparc64/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Likewise.
(__arch_compare_and_exchange_val_64_acq): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
trunc{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
nearbyint{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
fdim/fdimf to libm-sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/mul_1.S: Properly optimize for 32-bit
sparc V9 rather than using V8 code.
* sysdeps/sparc/sparc32/sparcv9/addmul_1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/submul_1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/mul_1.S: Properly optimize for 32-bit
sparc V9 rather than using V8 code.
* sysdeps/sparc/sparc32/sparcv9/addmul_1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/submul_1.S: Likewise.
* crypt/Makefile: Move test targets after toplevel Rules
inclusion. Grab any necessary sysdep routines when linking.
* crypt/md5.c (md5_process_block): Remove define, we will always
name it __md5_process_block.
(md5_finish_ctx): Update md5_process_block call.
(md5_stream): Likewise.
(md5_process_bytes): Likewise.
(md5_process_block): Rename to __md5_process_block and move to ...
* crypt/md5-block.c: ... here.
* crypt/sha256.c (sha256_process_block): Move to ...
* crypt/sha256-block.c: ... here.
* crypt/sha512.c (sha512_process_block): Move to ...
* crypt/sha512-block.c: ... here.
* locale/Makefile (CFLAGS-md5.c): Define to add crypt/ to include
path.
* sysdeps/sparc/sparc-ifunc.c (sparc_libc_ifunc): Define.
* sysdeps/sparc/sparc64/multiarch/Makefile
(libcrypt-sysdep_routines): Add crypto assembler sysdeps when in
crypt subdir.
(localedef-aux): Add md5 crypto assembler when in locale subdir.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Mirror sparc64
multiarch changes.
* sysdeps/sparc/sparc64/multiarch/md5-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/md5-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/sha256-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/sha256-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/sha512-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/sha512-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/md5-block.c: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/md5-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha256-block.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha256-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha512-block.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha512-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara4.S: New
file.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add to
sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/multiarch/memset.S: Use Niagara-4 memset
and bzero when HWCAP_SPARC_CRYPTO is present.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-niagara4.S: New
file.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add to
sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Use Niagara-4 memcpy
and mempcpy when HWCAP_SPARC_CRYPTO is set.
* sysdeps/sparc/sparc32/sparcv9/addmul_1.S: New file.
* sysdeps/sparc/sparc32/sparcv9/submul_1.S: New file.
* sysdeps/sparc/sparc32/sparcv9/mul_1.S: New file.
* sysdeps/sparc/sparc32/soft-fp/q_util.c
(___Q_simulate_exceptions): Use real FP ops rather than writing
into the %fsr.
* sysdeps/sparc/sparc32/soft-fp/q_util.c (__Qp_handle_exceptions):
Likewise.
* soft-fp/soft-fp.h (FP_CUR_EXCEPTIONS): Define.
(FP_TRAPPING_EXCEPTIONS): Provide default implementation.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* soft-fp/op-common.h (_FP_PACK_SEMIRAW): Signal underflow for
subnormals only when inexact has been signalled or underflow
exceptions are enabled.
(_FP_PACK_CANONICAL): Likewise.
* sysdeps/sparc/sparc32/bits/atomic.h: Include sysdep.h to get
HWCAP_* values only after the memory barriers have been defined.
(atomic_full_barrier): Define.
(atomic_read_barrier): Define.
(atomic_write_barrier): Define.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/rtld-memcpy.c: New file.
* sysdeps/sparc/Makefile: Add -fPIC to ASFLAGS-.os here....
* sysdeps/sparc/sparc32/Makefile: rather than here...
* sysdeps/sparc/sparc64/Makefile: and here.
* sysdeps/sparc/sparc64/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new vis3
fmin/fmax sysdep routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/unix/sysv/linux/multiarch/Implies:
New file.
* sysdeps/sparc/configure.in: New file.
* sysdeps/sparc/configure: Generate.
* configure.in (libc_cv_sparc_as_vis3): Substitute.
* configure: Regenerate.
* config.h.in (HAVE_AS_VIS3_SUPPORT): New.
* config.make.in (have-as-vis3): New.
* sysdeps/sparc/sparc32/sparcv9/Makefile (ASFLAGS-*): If VIS3 is
available use -Av9d instead of -Av9a.
* sysdeps/sparc/sparc64/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: New file.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Protect local
variables with appropriate CPP guards.
* sysdeps/sparc/sparc32/dl-trampoline.S: Propagate the stack_ptr from the
frame pointer, not the stack pointer. Correct layout comments. Fix test
on resulting framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit call.
* sysdeps/sparc/sparc64/dl-trampoline.S: Fix test on resulting
framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit
call.
* elf/sotruss-lib.c (la_sparc32_gnu_pltenter, la_sparc64_gnu_pltenter,
la_sparc32_gnu_pltexit, la_sparc64_gnu_pltexit): New functions.
(print_exit): Fix format string for return register value.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: New file.
* sysdeps/sparc/sparc32/__longjmp.S: Unwind in the 'thread' path
using a normal save/restore sequence, rather than allocating a
dummy stack frame just to store a frame pointer and restore.
* sysdeps/unix/sysv/linux/sparc/sparc32/____longjmp_chk.S: Likewise.
/
* sysdeps/sparc/Makefile: Add -fPIC when building crt{i,n}.S
* sysdeps/sparc/crti.S: New file.
* sysdeps/sparc/crtn.S: New file.
* sysdeps/sparc/sparc32/Makefile: Remove initfini handling.
* sysdeps/sparc/sparc64/Makefile: Likewise.
nptl/
* sysdeps/sparc/Makefile: Add -fPIC when building pt-crti.S and crtn.S
2010-03-03 David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_lazy_rel): Must
pass '1' for 't' argument to sparc_fixup_plt.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_lazy_rel):
Likewise.
* sysdeps/sparc/sparc32/dl-plt.h (OPCODE_BA_PT): Define.
(sparc_fixup_plt): Document 't' argument. Enable branch
optimization and use v9 branches when possible. Explain why we
cannot unconditionally patch the branch into the first PLT
instruction.
* sysdeps/sparc/sparc64/dl-plt.h (sparc64_fixup_plt): Document 't'
argument. Use v9 branches when possible. Explain why we can in
fact unconditionally use a branch in the first PLT instruction
here.
When prelinking fails we have to rewrite the PLT, but the code
doing so forgets to adjust all rela->r_offset addresses by the
location of where the object was actually mapped.
* sysdeps/sparc/sparc64/Makefile: Use -mcpu=v9 for initfini.s build.
2008-05-05 David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc32/Makefile: Use -mcpu=v7 for initfini.s build.
* sysdeps/sparc/sparc64/Makefile: Use -mcpu=v9 for initfini.s build.
need to check GLRO(dl_hwcap) & HWCAP_SPARC_FLUSH on sparcv9.
(sparc_fixup_plt): Add do_flush argument instead of figuring whether
flush should be used or not inside of the function.
(elf_machine_fixup_plt, elf_machine_rela): Adjust caller.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone,
__thread_start): Use HIDDEN_JUMPTARGET.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone,
__thread_start): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (JUMPTARGET): Define.
nptl/
* sysdeps/unix/sysv/linux/lowlevellock.c: Comment fix.
* sysdeps/unix/sysv/linux/sparc/sparc32/lowlevellock.c
(__lll_timedwait_tid): Pass LLL_SHARED as 4th argument to
lll_futex_timed_wait.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_runtime_setup): No
need to check GLRO(dl_hwcap) & HWCAP_SPARC_FLUSH on sparcv9.
(sparc_fixup_plt): Add do_flush argument instead of figuring whether
flush should be used or not inside of the function.
(elf_machine_fixup_plt, elf_machine_rela): Adjust caller.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone,
__thread_start): Use HIDDEN_JUMPTARGET.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone,
__thread_start): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (JUMPTARGET): Define.
