The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
This includes bindresvport and the NSS-related RPC functions. This will
simplify the removal of the sunrpc functionality because these functions
no longer have to be treated specially.
RETURN_ADDRESS is used at several places in glibc to mean a valid
code address of the call site, but with pac-ret it may contain a
pointer authentication code (PAC), so its definition is adjusted.
This is gcc PR target/94891: __builtin_return_address should not
expose signed pointers to user code where it can cause ABI issues.
In glibc RETURN_ADDRESS is only changed if it is built with pac-ret.
There is no detection for the specific gcc issue because it is
hard to test and the additional xpac does not cause problems.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently gcc -pg -mbranch-protection=pac-ret passes signed return
address to _mcount, so _mcount now has to always strip pac from the
frompc since that's from user code that may be built with pac-ret.
This is gcc PR target/94791: signed pointers should not escape and get
passed across extern call boundaries, since that's an ABI break, but
because existing gcc has this issue we work it around in glibc until
that is resolved. This is compatible with a fixed gcc and it is a nop
on systems without PAuth support. The bug was introduced in gcc-7 with
-msign-return-address=non-leaf|all support which in gcc-9 got renamed
to -mbranch-protection=pac-ret|pac-ret+leaf|standard.
strip_pac uses inline asm instead of __builtin_aarch64_xpaclri since
that is not a documented api and not available in all supported gccs.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use return address signing in assembly files for functions that save
LR when pac-ret is enabled in the compiler.
The GNU property note for PAC-RET is not meaningful to the dynamic
linker so it is not strictly required, but it may be used to track
the security property of binaries. (The PAC-RET property is only set
if BTI is set too because BTI implies working GNU property support.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Return address signing requires unwinder support, which is
present in libgcc since >=gcc-7, however due to bugs the
support may be broken in <gcc-10 (and similarly there may
be issues in custom unwinders), so pac-ret is not always
safe to use. So in assembly code glibc should only use
pac-ret if the compiler uses it too. Unfortunately there
is no predefined feature macro for it set by the compiler
so pac-ret is inferred from the code generation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When glibc is built with branch protection (i.e. with a gcc configured
with --enable-standard-branch-protection), all glibc binaries should
be BTI compatible and marked as such.
It is easy to link BTI incompatible objects by accident and this is
silent currently which is usually not the expectation, so this is
changed into a link error. (There is no linker flag for failing on
BTI incompatible inputs so all warnings are turned into fatal errors
outside the test system when building glibc with branch protection.)
Unfortunately, outlined atomic functions are not BTI compatible in
libgcc (PR libgcc/96001), so to build glibc with current gcc use
'CC=gcc -mno-outline-atomics', this should be fixed in libgcc soon
and then glibc can be built and tested without such workarounds.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Binaries can opt-in to using BTI via an ELF object file marking.
The dynamic linker has to then mprotect the executable segments
with PROT_BTI. In case of static linked executables or in case
of the dynamic linker itself, PROT_BTI protection is done by the
operating system.
On AArch64 glibc uses PT_GNU_PROPERTY instead of PT_NOTE to check
the properties of a binary because PT_NOTE can be unreliable with
old linkers (old linkers just append the notes of input objects
together and add them to the output without checking them for
consistency which means multiple incompatible GNU property notes
can be present in PT_NOTE).
BTI property is handled in the loader even if glibc is not built
with BTI support, so in theory user code can be BTI protected
independently of glibc. In practice though user binaries are not
marked with the BTI property if glibc has no support because the
static linked libc objects (crt files, libc_nonshared.a) are
unmarked.
This patch relies on Linux userspace API that is not yet in a
linux release but in v5.8-rc1 so scheduled to be in Linux 5.8.
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tailcalls must use x16 or x17 for the indirect branch instruction
to be compatible with code that uses BTI c at function entries.
(Other forms of indirect branches can only land on BTI j.)
Also added a BTI c at the ELF entry point of rtld, this is not
strictly necessary since the kernel does not use indirect branch
to get there, but it seems safest once building glibc itself with
BTI is supported.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
setcontext returns to the specified context via an indirect jump,
so there should be a BTI j.
In case of getcontext (and all other returns_twice functions) the
compiler adds BTI j at the call site, but swapcontext is a normal
c call that is currently not handled specially by the compiler.
So we change swapcontext such that the saved context returns to a
local address that has BTI j and then swapcontext returns to the
caller via a normal RET. For this we save the original return
address in the slot for x1 of the context because x1 need not be
preserved by swapcontext but it is restored when the context saved
by swapcontext is resumed.
The alternative fix (which is done on x86) would make swapcontext
special in the compiler so BTI j is emitted at call sites, on
x86 there is an indirect_return attribute for this, on AArch64
we would have to use returns_twice. It was decided against because
such fix may need user code updates: the attribute has to be added
when swapcontext is called via a function pointer and it breaks
always_inline functions with swapcontext.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To enable building glibc with branch protection, assembly code
needs BTI landing pads and ELF object file markings in the form
of a GNU property note.
The landing pads are unconditionally added to all functions that
may be indirectly called. When the code segment is not mapped
with PROT_BTI these instructions are nops. They are kept in the
code when BTI is not supported so that the layout of performance
critical code is unchanged across configurations.
The GNU property notes are only added when there is support for
BTI in the toolchain, because old binutils does not handle the
notes right. (Does not know how to merge them nor to put them in
PT_GNU_PROPERTY segment instead of PT_NOTE, and some versions
of binutils emit warnings about the unknown GNU property. In
such cases the produced libc binaries would not have valid
ELF marking so BTI would not be enabled.)
Note: functions using ENTRY or ENTRY_ALIGN now start with an
additional BTI c, so alignment of the following code changes,
but ENTRY_ALIGN_AND_PAD was fixed so there is no change to the
existing code layout. Some string functions may need to be
tuned for optimal performance after this commit.
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The compiler can add required elf markings based on CFLAGS
but the assembler cannot, so using C code for empty files
creates less of a maintenance problem.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Check BTI support in the compiler and linker. The check also
requires READELF that understands the BTI GNU property note.
It is expected to succeed with gcc >=gcc-9 configured with
--enable-standard-branch-protection and binutils >=binutils-2.33.
Note: passing -mbranch-protection=bti in CFLAGS when building glibc
may not be enough to get a glibc that supports BTI because crtbegin*
and crtend* provided by the compiler needs to be BTI compatible too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Using C code allows the compiler to add target specific object file
markings based on CFLAGS.
The arm specific abi-note.S is removed and similar object file fix
up will be avoided on AArch64 with standard branch protection.
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy.
This commit fixes the armv7 version.
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy and memmove.
This commit fixes the generic arm implementation of memcpy amd memmove.
It is generally not possible to add hidden aliases for global data
symbols: If the main executable contains a copy relocation against
the symbol, the hidden aliases keep pointing to the glibc-internal
copy of the symbol, instead of the symbol actually used by the
application.
Fixes commit 89aacb513e ("sunrpc:
Remove stray exports without --enable-obsolete-rpc [BZ #23166]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string/tst-strsignal.c (do_test): Actually check that RT signals are
available by comparing SIGRTMAX to SIGRTMIN. Check that SIGRTMAX is 64
before testing for a message reporting 65 for SIGRTMAX+1.
This commit replaces string manipulation during `iconv_open' and iconv_prog
option parsing with a structured, flag based conversion specification. In
doing so, it alters the internal `__gconv_open' interface and accordingly
adjusts its uses.
This change fixes several hangs in the iconv program and therefore includes
a new test to exercise iconv_prog options that originally led to these hangs.
It also includes a new regression test for option handling in the iconv
function.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The interface has hard-coded buffer sizes and is therefore tied to
DES. It also does not match current practice where different
services on the same host use different key material.
This change simplifies removal of the sunrpc code.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use snprintf instead of mempcpy plus itoa_word and remove unused
definitions. There is no potential for infinite recursion because
snprintf only use strerror_r for the %m specifier.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The buffer allocation uses the same strategy of strsignal.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The per-thread state is refactored two use two strategies:
1. The default one uses a TLS structure, which will be placed in the
static TLS space (using __thread keyword).
2. Linux allocates via struct pthread and access it through THREAD_*
macros.
The default strategy has the disadvantage of increasing libc.so static
TLS consumption and thus decreasing the possible surplus used in
some scenarios (which might be mitigated by BZ#25051 fix).
It is used only on Hurd, where accessing the thread storage in the in
single thread case is not straightforward (afaiu, Hurd developers could
correct me here).
The fallback static allocation used for allocation failure is also
removed: defining its size is problematic without synchronizing with
translated messages (to avoid partial translation) and the resulting
usage is not thread-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The __NSIG_WORDS value is based on minimum number of words to hold
the maximum number of signals supported by the architecture.
This patch also adds __NSIG_BYTES, which is the number of bytes
required to represent the supported number of signals. It is used in
syscalls which takes a sigset_t.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It refactor how signals are defined by each architecture. Instead of
include a generic header (bits/signum-generic.h) and undef non-default
values in an arch specific header (bits/signum.h) the new scheme uses a
common definition (bits/signum-generic.h) and each architectures add
its specific definitions on a new header (bits/signum-arch.h).
For Linux it requires copy some system default definitions to alpha,
hppa, and sparc. They are historical values and newer ports uses
the generic Linux signum-arch.h.
For Hurd the BSD signum is removed and moved to a new header (it is
used currently only on Hurd).
Checked on a build against all affected ABIs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The vfprintf implementation (used for all printf-family functions)
contains complicated logic to allocate internal buffers of a size
depending on the width and precision used for a format, using either
malloc or alloca depending on that size, and with consequent checks
for size overflow and allocation failure.
As noted in bug 26211, the version of that logic used when '$' plus
argument number formats are in use is missing the overflow checks,
which can result in segfaults (quite possibly exploitable, I didn't
try to work that out) when the width or precision is in the range
0x7fffffe0 through 0x7fffffff (maybe smaller values as well in the
wprintf case on 32-bit systems, when the multiplication by sizeof
(CHAR_T) can overflow).
All that complicated logic in fact appears to be useless. As far as I
can tell, there has been no need (outside the floating-point printf
code, which does its own allocations) for allocations depending on
width or precision since commit
3e95f6602b ("Remove limitation on size
of precision for integers", Sun Sep 12 21:23:32 1999 +0000). Thus,
this patch removes that logic completely, thereby fixing both problems
with excessive allocations for large width and precision for
non-floating-point formats, and the problem with missing overflow
checks with such allocations. Note that this does have the
consequence that width and precision up to INT_MAX are now allowed
where previously INT_MAX / sizeof (CHAR_T) - EXTSIZ or more would have
been rejected, so could potentially expose any other overflows where
the value would previously have been rejected by those removed checks.
I believe this completely fixes bugs 14231 and 26211.
Excessive allocations are still possible in the floating-point case
(bug 21127), as are other integer or buffer overflows (see bug 26201).
This does not address the cases where a precision larger than INT_MAX
(embedded in the format string) would be meaningful without printf's
return value overflowing (when it's used with a string format, or %g
without the '#' flag, so the actual output will be much smaller), as
mentioned in bug 17829 comment 8; using size_t internally for
precision to handle that case would be complicated by struct
printf_info being a public ABI. Nor does it address the matter of an
INT_MIN width being negated (bug 17829 comment 7; the same logic
appears a second time in the file as well, in the form of multiplying
by -1). There may be other sources of memory allocations with malloc
in printf functions as well (bug 24988, bug 16060). From inspection,
I think there are also integer overflows in two copies of "if ((width
-= len) < 0)" logic (where width is int, len is size_t and a very long
string could result in spurious padding being output on a 32-bit
system before printf overflows the count of output characters).
Tested for x86-64 and x86.
The auditing interface identifies namespaces by their first loaded
module. Once the namespace is empty, it is no longer possible to signal
LA_ACT_CONSISTENT for it because the first loaded module is already gone
at that point.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On s390x, I've recognize various -Werror=stringop-overflow messages
in iconv/loop.c and iconv/skeleton.c if build with gcc10 -O3.
With this commit gcc knows the size and do not raise those errors anymore.
Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables
to update thresholds for "rep movsb" and "rep stosb" at run-time.
Note that the user specified threshold for "rep movsb" smaller than
the minimum threshold will be ignored.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In TS 18661-1, getpayload had an unspecified return value for a
non-NaN argument, while C2x requires the return value -1 in that case.
This patch implements the return value of -1. I don't think this is
worth having a new symbol version that's an alias of the old one,
although occasionally we do that in such cases where the new function
semantics are a refinement of the old ones (to avoid programs relying
on the new semantics running on older glibc versions but not behaving
as intended).
Tested for x86_64 and x86; also ran math/ tests for aarch64 and
powerpc.
An extension called extended feature disable (XFD) is an extension added
for Intel AMX to the XSAVE feature set that allows an operating system
to enable a feature while preventing specific user threads from using
the feature.
