Following the previous work by Carlos O'Donell the category of LC_CTYPE
is correctly set to "i18n:2012" rather than "unicode:2014" and the
i18n_ctype file is once again regenerated from scratch to make sure it
does not contain any manual additions except the copyright message.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* localedata/unicode-gen/gen_unicode_ctype.py (output_head):
category of LC_CTYPE set to "i18n:2012".
* localedata/locales/i18n_ctype: Regenerate.
[BZ #19485]
* localedata/locales/csb_PL (LC_TIME): Fix “abmon” for March
and use a better translation for March in “mon”.
* localedata/locales/csb_PL: Use more ASCII to improve the
readability of the source.
[BZ #13953]
* localedata/locales/km_KH: Use ASCII as much
as possible for better readability of the source and
remove useless comments.
* localedata/locales/km_KH (LC_TIME): Remove era stuff, it
was commented out and apparently wrong anyway because it was
using Lao characters. If Buddhist era should be used
for km_KH, a native speaker should write the correct formaat
for Khmer.
* localedata/locales/km_KH (LC_TIME): Add first_weekday 1
(According to CLDR, the first weekday for Cambodia is Sunday).
* localedata/locales/km_KH (LC_NAME): Remove name_mr and name_mrs
(These were using Lao characters which must be wrong. If we get
the correct data from a native speaker, we could add it back, until
then it is better not to have name_mr and name_mrs at all than
having it wrong).
[BZ #15260]
* localedata/locales/doi_IN (LC_MESSAGES): Match only for the
first letters of yesstr and nostr in yesexpr and noexpr,
not for the full words.
* localedata/locales/hne_IN (LC_MESSAGES): Likewise.
* localedata/locales/kok_IN (LC_MESSAGES): Likewise.
* localedata/locales/mr_IN (LC_MESSAGES): Likewise.
* localedata/locales/sat_IN (LC_MESSAGES): Likewise.
* localedata/locales/km_KH (LC_MESSAGES): Match also for the
first letters of yesstr and nostr in yesexpr and noexpr,
until now only English was matched in yesexpr and noexpr.
* localedata/locales/tl_PH (LC_MESSAGES): Use “copy "fil_PH"”
instead of “copy "en_US"”. CLDR has yesstr and nostr data for
fil but not for tl. As tl and fil are very similar, using fil
is probably better than using English.
Pablo was l10n/i18n coordinator back in the old days but MandrakeSoft is
dead now
* localedata/locales/br_FR (LC_IDENTIFICATON): Add
Thierry Vignaud <thierry.vignaud@gmail.com> as the contact
for the br_FR locale.
"Ket" is the the most used negative answer, as it's the negative answer
to a positively phrased question
It's used as it or with the verb ("Ne ran ket", ...)
As such, "Ket" is used in most translations.
"Nann" is less used as it's the negative answer to a negatively phrased
question
See https://en.wikipedia.org/wiki/Yes_and_no for explanations about
languages with 3 or 4 form systems.
We still keep "Nn" for short answers as:
- new learners are used to "Non" in french
- and they often misuses "Nann"
- for compatibility with english
[BZ #21706]
* localedata/locales/br_FR (LC_MESSAGES): Fix nostr.
From localedef --help:
Output control:
...
--no-warnings=<warnings> Comma-separated list of warnings to disable;
supported warnings are: ascii, intcurrsym
...
--warnings=<warnings> Comma-separated list of warnings to enable;
supported warnings are: ascii, intcurrsym
Locales using SHIFT_JIS and SHIFT_JISX0213 character maps are not ASCII
compatible. In order to build locales using these character maps, and
have localedef exit with a status of 0, we add new option to localedef
to disable or enable specific warnings. The options are --no-warnings
and --warnings, to disable and enable specific warnings respectively.
The options take a comma-separated list of warning names. The warning
names are taken directly from the generated warning. When a warning
that can be disabled is issued it will print something like this: foo is
not defined [--no-warnings=foo]
For the initial implementation we add two controllable warnings; first
'ascii' which is used by the localedata installation makefile target to
install SHIFT_JIS and SHIFT_JISX0213-using locales without error; second
'intcurrsym' which allows a program to use a non-standard international
currency symbol without triggering a warning. The 'intcurrsym' is
useful in the future if country codes are added that are not in our
current ISO 4217 list, and the user wants to avoid the warning. Having
at least two warnings to control gives an example for how the changes
can be extended to more warnings if required in the future.
These changes allow ja_JP.SHIFT_JIS and ja_JP.SHIFT_JISX0213 to be
compiled without warnings using --no-warnings=ascii. The
localedata/Makefile $(INSTALL-SUPPORTED-LOCALES) target is adjusted to
automatically add `--no-warnings=ascii` for such charmaps, and likewise
localedata/gen-locale.sh is adjusted with similar logic.
v2: Bring verbose, be_quiet, and all warning control booleans into
record-status.c, and compile this object file to be used by locale,
iconv, and localedef. Any users include record-status.h.
v3: Fix an instance of boolean coercion in set_warning().
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The localedata collation test data is encoded in a particular
character set. We rename the test data to match the full locale
name with encoding, and adjust the Makefile and sort-test.sh
script. This allows us to have a future C.UTF-8 test that is
disambiguated from the built-in C locale.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
After the transition to generating a distinct file for Unicode ctype
information e.g. i18n_ctype, the check target was left with the wrong
target name. This patch fixes the check target and regenerates the
files with more information than previously used, filling in the the
LC_IDENTIFICATION data.
Tested on x86_64 by regenerating from Unicode source files, and
running checks. Tested by subsequently rebuilding all locales.
No regressions in testsuite.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Reported-by: Rafal Luzynski <digitalfreak@lingonborough.com>
* localedata/locales/hi_IN (LC_MESSAGES): In yesexpr and noexpr,
also check for the first characters of yesstr and nostr.
* localedata/locales/kn_IN (LC_MESSAGES): Likewise.
* localedata/locales/ks_IN@devanagari (LC_MESSAGES): Likewise.
* localedata/locales/chr_US (LC_MESSAGES): In yesexpr and noexpr,
match also for the contents of yesstr and nostr. As the first letter
of yesstr and nostr is equal, checking only for the first letter
is not enough.
* localedata/locales/ug_CN (LC_MESSAGES): Fix noexpr and yesexpr
by including the first letters of nostr and yesexpr in the regexp.
Also make it more readable by using ASCII where possible.
* localedata/locales/te_IN (LC_MESSAGES): Fix noexpr by including
the first letter of nostr in the regexp. It agrees with CLDR now.
Also make it more readable by using ASCII where possible.
* localedata/locales/km_KH (LC_MESSAGES): Fix yestr and nostr.
The yesstr and nostr apparently came from CLDR. And CLDR has a bug there:
these strings contain a U+17D6 (which somewhat looks like a colon)
instead of a real colon to separate the full words for “yes”
and “no” from the single letter responses.
* localedata/locales/ka_GE (LC_MESSAGES): Fix yesexp to make
it agree with CLDR (include the first letter of yesstr).
Also make it more readable by using ASCII where possible.
* localedata/locales/mr_IN (LC_MESSAGES): Fix yesstr and nostr
and improve yesexpr and noexpr. The yesstr and nostr apparently
came from CLDR. And CLDR has a bug there: these strings contain
a U+0903 (which looks like a colon) instead of a real colon
to separate the full words for “yes” and “no” from the single
letter responses.
Using all characters of the full words for yes and no in yesexpr and noexpr
makes no sense here, especially not because the words for yes and no
share one character.
* localedata/locales/bn_BD (LC_MESSAGES): Use only the first
letters of the full yesstr and nostr in yesexpr and noexpr.
* localedata/locales/an_ES (LC_MESSAGES): Add yesstr and nostr.
* localedata/locales/an_ES (LC_ADDRESS): Add lang_term and lang_lib.
* localedata/locales/an_ES: Make source more readable by using ASCII
where possible.
* localedata/locales/tpi_PG (LC_MESSAGES): Fix yesexpr and noexpr
by adding the generic +1 and -0 as in all other locales.
* localedata/locales/tpi_PG (LC_TIME): Fix some typos in the month and
day names and make it more readable by using ASCII where possible.
[BZ #16777]
* localedata/locales/pl_PL (LC_MONETARY): Use U+202F as mon_thousands_sep
and improve readability by using more ASCII.
* localedata/locales/pl_PL (LC_NUMERIC): Use U+202F as thousands_sep
and improve readability by using more ASCII.
The Valencian (meridional Catalan) locale is basically a copy of the
Catalan locale. The point of having a separate locale is only for PO
translations. This locale is already provided by several distributions
and is already supported by various projects like LibreOffice, Mozilla,
Gnome, KDE.
Aurelien Jarno <aurelien@aurel32.net>
[BZ #2522]
* localedata/locales/ca_ES@valencia: New file.
* localedata/SUPPORTED: Add ca_ES@valencia/UTF-8.
CLDR uses this pattern as well.
[BZ #22019]
* localedata/locales/el_GR: Set n_cs_precedes to 0.
* localedata/locales/el_CY: copy "el_GR" because it is identical.
* stdlib/tst-strfmon_l.c: adapt test case.
The error and warning handling in localedef, locale, and iconv
is a bit of a mess.
We use ugly constructs like this:
WITH_CUR_LOCALE (error (1, errno, gettext ("\
cannot read character map directory `%s'"), directory));
to issue errors, and read error_message_count directly from the
error API to detect errors. The problem with that is that the
code also uses error to print warnings, and informative messages.
All of this leads to problems where just having warnings will
produce an exit status as-if errors had been seen.
To fix this situation I have adopted the following high-level
changes:
* All errors are counted distinctly.
* All warnings are counted distinctly.
* All informative messages are not counted.
* Increasing verbosity cannot generate *more* errors, and
it previously did for errors conditional on verbose,
this is now fixed.
* Increasing verbosity *can* generate *more* warnings.
* Making the output quiet cannot generate *fewer* errors,
and it previously did for errors conditional on be_quiet,
this is now fixed.
* Each of error, warning, and informative message has it's
own function to call defined in record-status.h, and they
are: record_error, record_warning, and record_verbose.
* The record_error function always records an error, but
conditional on be_quiet may not print it.
* The record_warning function always records a warning,
but conditional on be_quiet may not print it.
* The record_verbose function only prints the verbose
message if verbose is true and be_quiet is false.
This has allowed the following fix:
* Previously any warnings were being treated as errors
because they incremented error_message_count, but now
we properly return an exit status of 1 if there are
warnings but output was generated.
All of this allows localedef to correctly decide if errors,
or warnings were present, and produce the correct exit code.
The locale and iconv programs now also use record-status.h
and we have removed the WITH_CUR_LOCALE hack, and instead
have internal push_locale/pop_locale functions centralized
in the record routines.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The commit does the following things:
* Move non-transliteration Unicode generated data to i18n_ctype.
* Copy the i18n_ctype data into i18n and add transliteration.
In the future, any locale which needs Unicode LC_CTYPE data can
also just use `copy i18n_ctype` and get the base character classes
and maps without transliteration.
Tested by compiling all the locales and my prototype C.UTF-8 which
uses it.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This code page is identical to code page 850 except that X'D5'
has been changed from LI61 (dotless i) to SC20 (euro symbol).
The code points from /x01 to /x1f in the /localedata/charmaps/IBM858
file have the same mapping as those in localedata/charmaps/ANSI_X3.4-1968.
That means they disagree with with
ftp://ftp.software.ibm.com/software/globalization/gcoc/attachments/CP00858.txt
in that range.
For example, localedata/charmaps/IBM858 and localedata/charmaps/ANSI_X3.4-1968 have:
“<U0001> /x01 START OF HEADING (SOH)”
whereas CP00858.txt has:
“01 SS000000 Smiling Face”
That means that CP00858.txt is not really ASCII-compatible and to make
it ASCII-compatible we deviate fro CP00858.txt in the code points from /x01
to /x1f.
[BZ #21084]
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Add IBM858 and ibm858.c.
* iconvdata/Makefile: Add IBM858.
* iconvdata/gconv-modules: Add IBM858.
* iconvdata/ibm858.c: New file.
* iconvdata/tst-tables.sh: Add IBM858
* localedata/charmaps/IBM858: New file.
“Bengali” still remained in some comments in the bn_BD locale file,
in iso-639.def and in a test input file. Change it there as well.
“Bangla” is now used as the English name for this language in CLDR.
[BZ #14925]
* libio/tst-widetext.input: Change “Bengali” to “Bangla”.
* locale/iso-639.def: Change “Bengali” to “Bangla”.
* localedata/locales/bn_BD: “Bengali” was still used in some
comments. Change it to “Bangla”.
[BZ #22070]
* localedata/unicode-gen/utf8_gen.py: Set the width for
characters with Prepended_Concatenation_Mark property to 1
* localedata/charmaps/UTF-8: Updated using the improved script.
