On i386, the double version of exp can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 fixes, the expf changes may in fact not be needed to
ensure underflow exceptions, but are included for consistency and to
fix the exp part of bug 18875 by ensuring that excess range and
precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18961]
* sysdeps/i386/fpu/e_exp.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp): For small results, force underflow exception and
remove excess range and precision from return value.
(__exp_finite): Likewise.
* sysdeps/i386/fpu/e_expf.S (flt_min): New object.
(MO): New macro.
(__ieee754_expf): For small results, force underflow exception and
remove excess range and precision from return value.
(__expf_finite): Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
Various exp2 implementations in glibc can miss underflow exceptions
when the scaling down part of the calculation is exact (or, in the x86
case, when the conversion from extended precision to the target
precision is exact). This patch forces the exception in a similar way
to previous fixes.
The x86 exp2f changes may in fact not be needed for this purpose -
it's likely to be the case that no argument of type float has an exp2
result so close to an exact subnormal float value that it equals that
value when rounded to 64 bits (even taking account of variation
between different x86 implementations). However, they are included
for consistency with the changes to exp2 and so as to fix the exp2f
part of bug 18875 by ensuring that excess range and precision is
removed from underflowing return values.
Tested for x86_64, x86 and mips64.
[BZ #16521]
[BZ #18875]
* math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for
small results.
* sysdeps/i386/fpu/e_exp2.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp2): For small results, force underflow exception and
remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp2f): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* math/auto-libm-test-in: Add more tests or exp2.
* math/auto-libm-test-out: Regenerated.
Profiling git's test suite, Linus noted [1] that a disproportionately
large amount of time was spent reading /proc/meminfo. This is done by
the glibc functions get_phys_pages and get_avphys_pages, but they only
need the MemTotal and MemFree fields, respectively. That same
information can be obtained with a single syscall, sysinfo, instead of
six: open, fstat, mmap, read, close, munmap. While sysinfo also
provides more than necessary, it does a lot less work than what the
kernel needs to do to provide the entire /proc/meminfo. Both strace -T
and in-app microbenchmarks shows that the sysinfo() approach is
roughly an order of magnitude faster.
sysinfo() is much older than what glibc currently requires, so I don't
think there's any reason to keep the old parsing code. Moreover, this
makes get_[av]phys_pages work even in the absence of /proc.
Linus noted that something as simple as 'bash -c "echo"' would trigger
the reading of /proc/meminfo, but gdb says that many more applications
than just bash are affected:
Starting program: /bin/bash "-c" "echo"
Breakpoint 1, __get_phys_pages () at ../sysdeps/unix/sysv/linux/getsysstats.c:283
283 ../sysdeps/unix/sysv/linux/getsysstats.c: No such file or directory.
(gdb) bt
So it seems that any application that uses qsort on a moderately sized
array will incur this cost (once), which is obviously proportionately
more expensive for lots of short-lived processes (such as the git test
suite).
[1] http://thread.gmane.org/gmane.linux.kernel/2019285
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
* sysdeps/unix/sysv/linux/getsysstats.c (__get_phys_pages):
Use sysinfo system call instead of parsing /proc/meminfo.
* sysdeps/unix/sysv/linux/getsysstats.c (__get_avphys_pages):
Likewise.
This patch adds more libm test inputs found through random test
generation to increase previously known ulps. This particular test
generation was run for mips64, so most of the increased ulps are for
ldbl-128 (float and double having been fairly well covered by such
testing for x86_64), but there's the odd ulps increase for other
formats.
Tested for x86_64, x86 and mips64.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp,
exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and
tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
The ldbl-128 / ldbl-128ibm implementation of lgammal converts (the
floor of minus) non-integer negative arguments to int to determine the
value of signgam. When those values are outside the range of int,
this produces spurious "invalid" exceptions and incorrect values of
signgam. This patch fixes this by instead determining signgam through
comparing half the integer in question to floor of half the integer.
Tested for mips64, x86_64 and x86.
[BZ #18952]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Do
not convert non-integer negative arguments to int to determine the
value of signgam.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
This patch adds more libm test inputs found through random test
generation to increase observed ulps on x86_64.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acosh, atanh, cbrt,
cosh, csqrt, erfc, expm1 and lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments. This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).
This patch fixes this inaccuracy. For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant. Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.
Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values. The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy. The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.
In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x). Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations. Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).
Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range. Outside that range,
the previous implementation continues to be used.
Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.
[BZ #2542]
[BZ #2543]
[BZ #2558]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
__lgamma_neg for arguments from -28.0 to -2.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
__lgamma_negf for arguments from -15.0 to -2.0.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -33.0 to -2.0.
* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
(__lgamma_neg): Likewise.
(__lgamma_negl): Likewise.
(__lgamma_product): Likewise.
(__lgamma_productl): Likewise.
* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
There are a few .set mips* assembler directives used in the MIPS specific
sysdep code that force an instruction to be assembled for a specific ISA.
The reason for these is to allow an instruction to be encoded when it might
not be supported in the current ISA (when the code is run the Linux kernel
will trap and emulate any unsupported instructions). Unfortunately forcing
a specific ISA means that when assembling for a newer ISA, where the
instruction has a different encoding, the wrong encoding will be used.
* sysdeps/mips/bits/atomic.h [_MIPS_SIM == _ABIO32] (MIPS_PUSH_MIPS2):
Only use .set mips2 if the current ISA is below mips2.
* sysdeps/mips/sys/tas.h [_MIPS_SIM == _ABIO32] (_test_and_set):
Likewise.
* sysdeps/mips/nptl/tls.h (READ_THREAD_POINTER): Only use .set
mips32r2 if the current ISA is below mips32r2.
* sysdeps/mips/tls-macros.h (TLS_RDHWR): New define.
(TLS_IE): Updated to use the TLD_RDHWR macro.
(TLS_LE): Likewise.
* sysdeps/unix/mips/sysdep.h (__mips_isa_rev): Moved out of #ifdef
__ASSEMBLER__ condition.
when initial make call has subdir= explicitly set.
* sysdeps/mach/Makefile ($(patsubst
mach%,m\%h%,$(mach-before-compile))): Force subdir to mach when
calling $(MAKE).
* sysdeps/mach/hurd/Makefile ($(patsubst %,$(hurd-objpfx)hurd/%.%,auth
io fs process)): Force subdir to hurd when calling $(MAKE).
($(common-objpfx)hurd/../mach/RPC_task_get_sampled_pcs.c): Force
subdir to mach when calling $(MAKE).
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/linkmap.h to plain linkmap.h to follow that
convention.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/linkmap.h: Move to ...
* sysdeps/generic/linkmap.h: ...here.
* sysdeps/aarch64/bits/linkmap.h: Move to ...
* sysdeps/aarch64/linkmap.h: ...here.
* sysdeps/arm/bits/linkmap.h: Move to ...
* sysdeps/arm/linkmap.h: ...here.
* sysdeps/hppa/bits/linkmap.h: Move to ...
* sysdeps/hppa/linkmap.h: ...here.
* sysdeps/ia64/bits/linkmap.h: Move to ...
* sysdeps/ia64/linkmap.h: ...here.
* sysdeps/mips/bits/linkmap.h: Move to ...
* sysdeps/mips/linkmap.h: ...here.
* sysdeps/s390/bits/linkmap.h: Move to ...
* sysdeps/s390/linkmap.h: ...here.
* sysdeps/sh/bits/linkmap.h: Move to ...
* sysdeps/sh/linkmap.h: ...here.
* sysdeps/x86/bits/linkmap.h: Move to ...
* sysdeps/x86/linkmap.h: ...here.
* include/link.h: Include <linkmap.h> instead of <bits/linkmap.h>.
Commit f4491417cc introduced some warnings
when building GLIBC with GCC 5.x. similar to those fixed by commit
dd6e8af6ba. This patch fixes those warnings.
* sysdeps/unix/sysv/linux/socketpair.c: Use the address of the
first member of struct sv in syscall macro.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/stdio-lock.h to plain stdio-lock.h to follow
that convention.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/stdio-lock.h: Move to ...
* sysdeps/generic/stdio-lock.h: ...here.
(_BITS_STDIO_LOCK_H): Rename macro to _STDIO_LOCK_H.
* sysdeps/nptl/bits/stdio-lock.h: Move to ...
* sysdeps/nptl/stdio-lock.h: ...here.
(_BITS_STDIO_LOCK_H): Rename macro to _STDIO_LOCK_H.
* include/libio.h: Include <stdio-lock.h> instead of
<bits/stdio-lock.h>.
* sysdeps/nptl/fork.c: Likewise.
* sysdeps/pthread/flockfile.c: Likewise.
* sysdeps/pthread/ftrylockfile.c: Likewise.
* sysdeps/pthread/funlockfile.c: Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/m68k-vdso.h to plain m68k-vdso.h to follow
that convention.
[BZ #14912]
* sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.h: ...here.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Include
<m68k-vdso.h> instead of <bits/m68k-vdso.h>.
* sysdeps/unix/sysv/linux/m68k/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.c: Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/libc-tsd.h to plain libc-tsd.h to follow that
convention.
Tested for x86_64 (testing, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/libc-tsd.h: Move to ...
* sysdeps/generic/libc-tsd.h: ...here.
(_GENERIC_BITS_LIBC_TSD_H): Rename macro to _GENERIC_LIBC_TSD_H.
* sysdeps/mach/hurd/bits/libc-tsd.h: Move to ...
* sysdeps/mach/hurd/libc-tsd.h: ...here.
(_BITS_LIBC_TSD_H): Rename macro to _LIBC_TSD_H.
* include/ctype.h: Include <libc-tsd.h> instead of
<bits/libc-tsd.h>.
* include/rpc/rpc.h: Likewise.
* locale/localeinfo.h: Likewise.
* sunrpc/rpc_thread.c: Likewise.
* sysdeps/mach/hurd/malloc-machine.h: Likewise.
* sysdeps/nptl/malloc-machine.h: Likewise.
This patch adds new constants from Linux 4.2 to netinet/in.h:
IPPROTO_MPLS and IP_BIND_ADDRESS_NO_PORT (both in
include/uapi/linux/in.h in Linux; one directly in netinet/in.h, one in
bits/in.h in glibc).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
* inet/netinet/in.h (IPPROTO_MPLS): New enum value and macro.
* sysdeps/unix/sysv/linux/bits/in.h (IP_BIND_ADDRESS_NO_PORT): New
macro.
This patch adds move TCP_* values to sysdeps/gnu/netinet/tcp.h to
bring it up to date with Linux 4.2. TCP_SAVE_SYN and TCP_SAVED_SYN
are new in 4.2, TCP_NOTSENT_LOWAT and TCP_CC_INFO are older (Szabolcs
previously noted in
<https://sourceware.org/ml/libc-alpha/2015-06/msg00938.html> that this
header was out of date in glibc).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
* sysdeps/gnu/netinet/tcp.h (TCP_NOTSENT_LOWAT): New macro.
(TCP_CC_INFO): Likewise.
(TCP_SAVE_SYN): Likewise.
(TCP_SAVED_SYN): Likewise.
This patch fixes the default wordsize-32 mmap implementation offset
calculation for negative values. Current code uses signed shift
operation to calculate the multiple size to use with syscall and
it is implementation defined. Change it to use a division base
on mmap page size (default being as before, 4096).
Tested on armv7hf.
[BZ #18877]
* posix/Makefile (tests): Add tst-mmap-offset.
* posix/tst-mmap.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c (__mmap): Fix
offset calculation for negative values.
We detect i586 and i686 features at run-time by checking CX8 and CMOV
CPUID features bits. We can use these information to select the best
implementation in ix86 multiarch. HAS_I586/HAS_I686 is true if i586/i686
instructions are available on the processor.
Due to the reordering and the other nifty extensions in i686, it is not
really good to use heavily i586 optimized code on an i686. It's better
to use i486 code if it isn't an i586. USE_I586/USE_I686 is true if
i586/i686 implementation should be used for the processor. USE_I586
is true only if i686 instructions aren't available. If i686 instructions
are available, we always choose i686 or i486 implementation, in that order,
and we never choose i586 implementation for i686-class processors.
* sysdeps/i386/init-arch.h: New file.
* sysdeps/i386/i586/init-arch.h: Likewise.
* sysdeps/i386/i686/init-arch.h: Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Set bit_I586
bit if CX8 is available. Set bit_I686 bit if CMOV is available.
* sysdeps/x86/cpu-features.h (bit_I586): New.
(bit_I686): Likewise.
(bit_CX8): Likewise.
(bit_CMOV): Likewise.
(index_CX8): Likewise.
(index_CMOV): Likewise.
(index_I586): Likewise.
(index_I686): Likewise.
(reg_CX8): Likewise.
(reg_CMOV): Likewise.
(HAS_I586): Defined as HAS_ARCH_FEATURE (I586) if i586 isn't
available at compile-time.
(HAS_I686): Defined as HAS_ARCH_FEATURE (I686) if i686 isn't
available at compile-time.
* sysdeps/x86/init-arch.h (USE_I586): New macro.
(USE_I686): Likewise.
Since glibc doesn't support i386 any more, we can remove i486 subdirectory.
* sysdeps/i386/i586/Implies: Removed.
* sysdeps/i386/i686/Implies: Likewise.
Since glibc doesn't support i386 any more, we can move i486/strlen.S
to strlen.S.
* sysdeps/i386/i486/strlen.S: Moved to ...
* sysdeps/i386/strlen.S: Here.
Since glibc doesn't support i386 any more, we can move i486/strcat.S
to strcat.S.
* sysdeps/i386/i486/strcat.S: Moved to ...
* sysdeps/i386/strcat.S: Here.
* sysdeps/i386/i686/multiarch/strcat.S: Updated.
Since glibc doesn't support i386 any more, we can move
i486/pthread_spin_trylock.S to pthread_spin_trylock.S
* sysdeps/i386/i486/pthread_spin_trylock.S: Moved to ...
* sysdeps/i386/pthread_spin_trylock.S: Here.
* sysdeps/i386/i586/pthread_spin_trylock.S: Removed.
* sysdeps/i386/i686/pthread_spin_trylock.S: Updated.
Since glibc doesn't support i386 any more, we can move
i486/string-inlines.c to string-inlines.c.
* sysdeps/i386/i486/string-inlines.c: Moved to ...
* sysdeps/i386/string-inlines.c: Here.
Since glibc doesn't support i386 any more, we can move i486/bits/atomic.h
to bits/atomic.h.
* sysdeps/i386/i486/bits/atomic.h: Moved to ...
* sysdeps/i386/bits/atomic.h: Here.
As with other spots in the code, GCC 4.8 unnecessarily complains about
an uninitialized variable in tanl calcs, so this patch disables. With
it, the library and sees the usual set of test passes.
* sysdeps/ieee754/ldbl-96/k_tanl.c: Include <libc-internal.h>.
(__kernel_tanl): Ignore uninitialized warnings around use of SIGN.
Linux commit b4b56f9ecab40f3b4ef53e130c9f6663be491894 introduced
a new HWCAP2 bit to indicate that the kernel now aborts a memory
transaction when a syscall is made. This patch adds that bit to
sysdeps/powerpc/bits/hwcap.h.
2015-08-26 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_HTM_NOSC.
* sysdeps/powerpc/dl-procinfo.c:
(_dl_powerpc_cap_flags): Added descriptor for this hwcap
feature so it shows when LD_SHOW_AUXV=1.
Power ISA 2.07B section B.5.5 relaxed the barrier requirement around a
TLE enabled lock. It is now identical to a traditional lock.
2015-08-26 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__arch_compare_and_exchange_val_32_acq): Remove and use common
definition. ISA 2.07B no longer requires full sync.
Replace BZERO_P with USE_AS_BZERO in i586/i686 memset.S to support i386
multi-arch memset. Also we should check SHARED not PIC for libc.so
since libc.a may be compiled with PIC.
* sysdeps/i386/i586/bzero.S (USE_AS_BZERO): New.
* sysdeps/i386/i686/bzero.S (USE_AS_BZERO): Likewise.
* sysdeps/i386/i586/memset.S (BZERO_P): Removed.
Check USE_AS_BZERO/SHARED instead of BZERO_P/PIC.
(__memset_zero_constant_len_parameter): New.
* sysdeps/i386/i686/memset.S (BZERO_P): Removed.
Check USE_AS_BZERO/SHARED instead of BZERO_P/PIC.
(__memset_zero_constant_len_parameter): Don't define if
__memset_chk or USE_AS_BZERO are defined.
Replace MEMPCPY_P with USE_AS_MEMPCPY in i586 memcpy.S to support i386
multi-arch memcpy. Also we should check SHARED not PIC for libc.so
since libc.a may be compiled with PIC.
* sysdeps/i386/i586/memcpy.S (MEMPCPY_P): Removed.
Check USE_AS_MEMPCPY/SHARED instead of MEMPCPY_P/PIC.
* sysdeps/i386/i586/mempcpy.S (USE_AS_MEMPCPY): New.
Since x86-64 ld.so preserves vector registers now, we can use SSE in
x86-64 ld.so. We should run tst-ld-sse-use.sh only on i386.
* sysdeps/x86/Makefile [$(subdir) == elf] (CFLAGS-.os,
tests-special, $(objpfx)tst-ld-sse-use.out): Moved to ...
* sysdeps/i386/Makefile [$(subdir) == elf] (CFLAGS-.os,
tests-special, $(objpfx)tst-ld-sse-use.out): Here. Update
comments.
* sysdeps/x86_64/Makefile [$(subdir) == elf] (CFLAGS-.os): Add
-mno-mmx for $(all-rtld-routines).
* sysdeps/x86/tst-ld-sse-use.sh: Moved to ...
* sysdeps/i386/tst-ld-sse-use.sh: Here. Replace x86-64 with
i386.
Building glibc on s390-32 with gcc option -mzarch produces the error due to
sysdeps/s390/jmpbuf-unwind.h:37:10: (void *) (_Unwind_GetCFA (_context):
cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
Building on s390-32 in esa-mode or s390-64 is fine.
_Unwind_GetCFA returns an _Unwind_Word which is an unsigned
with a size of 4 bytes on s390-32 (esa-mode) and 8 bytes on s390-64.
On s390-32 (zarch-mode), _Unwind_Word has a size of 8 bytes, too.
_Unwind_Word is defined in sysdeps/generic/unwind.h as
typedef unsigned _Unwind_Word __attribute__((__mode__(__word__)));
In libgcc unwind header (<gcc-src>/libgcc/unwind-generic.h) this typedef has
changed to "typedef unsigned _Unwind_Word __attribute__((__mode__(__unwind_word__)));"
in June 2008.
With this mode, _Unwind_Word has a size of 4 bytes on s390-32 (zarch-mode).
The same change applies to _Unwind_Sword.
Thus this patch updates the unwind header according to these changes.
Afterwards, the int-to-pointer-cast-warning is gone away on s390-32 (zarch-mode)
and the testsuite runs with the same test-failures as s390-32 (esa-mode)
plus FAIL: c++-types-check. Here register_t is expected to has a size of 4 bytes,
but it has a size of 8 bytes due to:
posix/sys/types.h:205:typedef int register_t __attribute__ ((__mode__ (__word__)));
The libgcc-patch for gcc 4.4 can be found here:
"[PATCH, spu, unwind] Remove attribute ((mode (word))) from unwind.h"
https://gcc.gnu.org/ml/gcc-patches/2008-06/msg00969.html
ChangeLog:
* sysdeps/generic/unwind.h
(_Unwind_Word): Use __mode__(__unwind_word__)
instead of __mode__(__word__).
(_Unwind_Sword): Likewise.
This patch fixes the build error with gcc6:
array subscript is above array bounds [-Werror=array-bounds]
While including loop.c to construct the SINGLE(LOOPFCT) method
for converting from UTF-16 to UTF-8, the bytebuf array with length
MAX_NEEDED_INPUT is used as inptr. MAX_NEEDED_INPUT defaults to
MIN_NEEDED_INPUT if not defined before including loop.c.
Thus bytebuf has a length of 2.
This patch defines MAX_NEEDED_INPUT to MAX_NEEDED_TO, which is 4.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c
(MAX_NEEDED_INPUT): New define.
(MAX_NEEDED_OUTPUT): New define.
This patch provides optimized version of memrchr with the z13 vector
instructions.
ChangeLog:
* sysdeps/s390/multiarch/memrchr-c.c: New File.
* sysdeps/s390/multiarch/memrchr-vx.S: Likewise.
* sysdeps/s390/multiarch/memrchr.c: Likewise.
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Add memrchr functions.
* sysdeps/s390/multiarch/ifunc-impl-list-common.c
(__libc_ifunc_impl_list_common): Add ifunc test for memrchr.
