It uses __clock_nanosleep64 and adds the __nanosleep64 symbol.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The generic version does not have time64 support and Linux default
uses utimensat. With hppa version gone, __ASSUME_UTIMES is not used
anymore.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The syscall __NR_clock_getres_time64 (for 32-bit) or __NR_clock_getres
(for 64-bit) is used as default. The 32-bit fallback is used iff
__ASSUME_TIME64_SYSCALLS is not defined, which assumes the kernel ABI
provides either __NR_rt_sigtimedwait (32-bit time_t).
Since the symbol does not use any type which might be affected by the
time_t, there is no need to add a 64-bit variant.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The syscall __NR_sigtimedwait_time64 (for 32-bit) or __NR_sigtimedwait
(for 64-bit) is used as default. The 32-bit fallback is used iff
__ASSUME_TIME64_SYSCALLS is not defined, which assumes the kernel ABI
provides either __NR_rt_sigtimedwait (32-bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The syscall __NR_pselect6_time64 (32-bit) or __NR_pselect6 (64-bit)
is used as default. For architectures with __ASSUME_TIME64_SYSCALLS
the 32-bit fallback uses __NR_select/__NR__newselect or __NR_pselect6
(it should cover the microblaze case where older kernels do not
provide __NR_pselect6).
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Similar to 64-bit time __futex_abstimed_wait_cancellable64, it should
check for overflow and convert to 32-bit timespec iff timeout is not
NULL.
It fixes some regression on i686-linux-gnu running on a 4.15 kernel.
dl_powerpc_cpu_features also needs to be protected by __GLRO to check
for the _rtld_global_ro realocation before accessing it.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The behavior of isnan/__builtin_isnan on bit patterns that do not
correspond to something that the CPU would produce from valid inputs
is currently under-defined in the toolchain. (The GCC built-in and
glibc disagree.)
The isnan check in PRINTF_FP_FETCH in stdio-common/printf_fp.c
assumes the GCC behavior that returns true for non-normal numbers
which are not specified as NaN. (The glibc implementation returns
false for such numbers.)
At present, passing non-normal numbers to __mpn_extract_long_double
causes this function to produce irregularly shaped multi-precision
integers, triggering undefined behavior in __printf_fp_l.
With GCC 10 and glibc 2.32, this behavior is not visible because
__builtin_isnan is used, which avoids calling
__mpn_extract_long_double in this case. This commit updates the
implementation of __mpn_extract_long_double so that regularly shaped
multi-precision integers are produced in this case, avoiding
undefined behavior in __printf_fp_l.
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is similar to commit a26e2e9fea
"Allow memset local PLT reference for powerpc soft-float.".
GCC 10.1 results in the localplt test failing for RISC-V.
From the original commit for power-pc:
Since memset is documented as a function GCC may always implicitly
generate calls to, it seems reasonable to allow that local PLT
reference (just like those for libgcc functions that GCC implicitly
generates calls to and that are also exported from libc.so), which
this patch does.
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
commit 04bba1e5d8
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Aug 5 13:51:56 2020 -0700
x86: Set CPU usable feature bits conservatively [BZ #26552]
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
no longer turns on the usable bits of IBT and SHSTK since we don't know
if IBT and SHSTK are usable until much later. Use HAS_CPU_FEATURE to
check if the processor supports IBT and SHSTK.
Add Intel Key Locker:
https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html
support to <sys/platform/x86.h>. Intel Key Locker has
1. KL: AES Key Locker instructions.
2. WIDE_KL: AES wide Key Locker instructions.
3. AESKLE: AES Key Locker instructions are enabled by OS.
Applications should use
if (CPU_FEATURE_USABLE (KL))
and
if (CPU_FEATURE_USABLE (WIDE_KL))
to check if AES Key Locker instructions and AES wide Key Locker
instructions are usable.
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
The syscall __NR_pselect6_time64 (32-bit) or __NR_pselect6 (64-bit)
is used as default. For architectures with __ASSUME_TIME64_SYSCALLS
the 32-bit fallback uses __NR_pselec6.
To accomodate microblaze missing pselect6 support on kernel older
than 3.15 the fallback is moved to its own function to the microblaze
specific implementation can override it.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Either the __NR_semtimedop_time64 (for 32-bit) or the __NR_semtimedop
(for 64-bit) syscall is used as default. The 32-bit fallback is used
iff __ASSUME_TIME64_SYSCALLS is not defined, which assumes the kernel
ABI provides either __NR_ipc or __NR_semtimeop (for 32-bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
It avoid continuing issue the __NR_ppoll_time64 syscall once the kernel
advertise it does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_getres or __NR_clock_getres_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
It also uses the time64-support functions to simplify it further.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The __NR_mknodat syscall is supported on all kernels, so the generic
implementation is used as default.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The LFS support is implemented on fxstat64.c, instead of fxstat.c for
64-bit architectures. The fxstatat.c implements the non-LFS and it is
a no-op for !XSTAT_IS_XSTAT64.
The generic non-LFS implementation handles two cases:
1. New kABIs which uses generic pre 64-bit time Linux ABI (csky and
nios): it issues __NR_fstatat64 plus handle the overflow on st_ino,
st_size, or st_blocks. It only handles _STAT_VER_KERNEL.
2. Old kABIs with old non-LFS support (arm, i386, hppa, m68k, mips32,
microblaze, s390, sh, powerpc, and sparc32). it issues
__NR_fstatat64 and convert to non-LFS stat struct based on the
version.
Also non-LFS mips64 is an outlier and it has its own implementation
since _STAT_VER_LINUX requires a different conversion function (it
uses the kernel_stat as the sysissues argument since its exported ABI
is different than the kernel one for both non-LFS and LFS
implementation).
The generic LFS implementation handles multiple cases:
1. XSTAT_IS_XSTAT64 being 1:
1.1. 64-bit kABI (aarch64, ia64, powerpc64*, s390x, riscv64, and
x86_64): it issues __NR_newfstatat for _STAT_VER_KERNEL or
_STAT_VER_LINUX.
1.2. 64-bit kABI outlier (sparc64): it issuess fstatat64 with a
temporary stat64 and convert to output stat64 based on the
input version (and using a sparc64 specific __xstat32_conv).
1.3. New 32-bit kABIs with only 64-bit time_t support (arc and
riscv32): it issues __NR_statx and covert to struct stat64.
2. Old ABIs with XSTAT_IS_XSTAT64 being 0 (arm, csky, i386, hppa, m68k,
microblaze, mips32, nios2, sh, powerpc32, and sparc32): it issues
__NR_fstat64.
Also, two special cases requires specific implementations:
1. alpha: it uses the __NR_fstatat64 syscall instead.
2. mips64: as for non-LFS implementation its ABIs differ from
glibc exported one, which requires an specific conversion
function to handle the kernel_stat.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The LFS support is implemented on fxstat64.c, instead of fxstat.c for
64-bit architectures. The fxstat.c implements the non-LFS and it is
a no-op for !XSTAT_IS_XSTAT64.
The generic non-LFS implementation handles two cases:
1. New kABIs which uses generic pre 64-bit time Linux ABI (csky and
nios): it issuess __NR_fstat64 plus handle the overflow on st_ino,
st_size, or st_blocks. It only handles _STAT_VER_KERNEL.
2. Old KABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, s390, sh, powerpc, and sparc32). For _STAT_VER_KERNEL
it issues __NR_fstat, otherwise it calls __NR_fstat64 and convert
to non-LFS stat struct and handle possible overflows on st_ino,
st_size, or st_blocks.
Also non-LFS mips is an outlier and it has its own implementation since
_STAT_VER_LINUX requires a different conversion function (it uses the
kernel_stat as the sysissues argument since its exported ABI is
different than the kernel one for both non-LFS and LFS implementation).
The generic LFS implementation handles multiple cases:
1. XSTAT_IS_XSTAT64 being 1:
1.1. 64-bit kABI (aarch64, ia64, powerpc64*, s390x, riscv64, and
x86_64): it issuess __NR_fstat for _STAT_VER_KERNEL or
_STAT_VER_LINUX.
1.2. Old 64-bit kABI with defines __NR_fstat64 instead of __NR_fstat
(sparc64): it issues __NR_fstat for _STAT_VER_KERNEL or
__NR_fstat64 and convert to struct stat64.
1.3. New 32-bit kABIs with only 64-bit time_t support (arc and
riscv32): it issuess __NR_statx and covert to struct stat64.
2. Old ABIs with XSTAT_IS_XSTAT64 being 0 (arm, csky, i386, hppa,
m68k, microblaze, mips32, nios2, sh, powerpc32, and sparc32): it
issues __NR_fstat64.
Also, two special cases requires specific implementations:
1. alpha: it requires to handle _STAT_VER_KERNEL64 to issues
__NR_fstat64 and use the kernel_stat with __NR_fstat otherwise.
2. mips64: as for non-LFS implementation its ABIs differ from
glibc exported one, which requires an specific conversion
function to handle the kernel_stat.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The LFS support is implemented on lxstat64.c, instead of lxstat.c for
64-bit architectures. The xstat.c implements the non-LFS and it is
a no-op for !XSTAT_IS_XSTAT64.
The generic non-LFS implementation handles two cases:
1. New kABIs which uses generic pre 64-bit time Linux ABI (csky and
nios): it issues __NR_fstat64 with AT_SYMLINK_NOFOLLOW plus handles
the possible overflow off st_ino, st_size, or st_blocks. It only
handles _STAT_VER_KERNEL.
2. Old KABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, s390, sh, powerpc, and sparc32). For _STAT_VER_KERNEL
it issues __NR_lstat, otherwise it isseus __NR_lstat64 and convert
to non-LFS stat struct and handle possible overflows on st_ino,
st_size, or st_blocks.
Also non-LFS mips is an outlier and it has its own implementation since
_STAT_VER_LINUX requires a different conversion function (it uses the
kernel_stat as the syscall argument since its exported ABI is different
than the kernel one for both non-LFS and LFS implementation).
The generic LFS implementation handles multiple cases:
1. XSTAT_IS_XSTAT64 being 1:
1.1. Old 64-bit kABI (ia64, powerpc64*, s390x, sparc64, x86_64): it
issues __NR_lstat for _STAT_VER_KERNEL or _STAT_VER_LINUX.
1.2. Old 64-bit kABI with defines __NR_lstat64 instead of __NR_lstat
(sparc64): it issues __NR_lstat for _STAT_VER_KERNEL or
__NR_lstat64 and convert to struct stat64.
1.3. New kABIs which uses generic 64-bit Linux ABI (aarch64 and
riscv64): it issues __NR_newfstatat with AT_SYMLINK_NOFOLLOW
and only for _STAT_VER_KERNEL.
1.4. New 32-bit kABIs with only 64-bit time_t support (arc and
riscv32): it issues __NR_statx and covert to struct stat64.
2. Old ABIs with XSTAT_IS_XSTAT64 being 0:
2.1. New kABIs which uses generic pre 64-bit time Linux ABI (csky
and nios2): it issues __NR_fstatat64 for _STAT_VER_KERNEL.
2.2. Old kABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, s390, sh, mips32, powerpc32, and sparc32): it
issues __NR_lstat64.
Also, two special cases requires specific LFS implementations:
1. alpha: it requires to handle _STAT_VER_KERNEL64 to issue
__NR_lstat64 and use the kernel_stat with __NR_lstat otherwise.
2. mips64: as for non-LFS implementation its ABIs differ from
glibc exported one, which requires a specific conversion
function to handle the kernel_stat.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The LFS support is implemented on xstat64.c, instead of xstat.c for
64-bit architectures. The xstat.c implements the non-LFS it is
no-op for !XSTAT_IS_XSTAT64.
The generic non-LFS implementation handle two cases:
1. New kABIs which uses generic pre 64-bit time Linux ABI (csky and
nios): it issues __NR_fstat64 plus handle the overflow on st_ino,
st_size, or st_blocks. It only handles _STAT_VER_KERNEL.
2. Old KABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, s390, sh, powerpc, and sparc32). For _STAT_VER_KERNEL
it issues __NR_stat, otherwise it issues __NR_stat64 and convert
to non-LFS stat struct handling possible overflows on st_ino,
st_size, or st_blocks.
Also the non-LFS mips is an outlier and it has its own implementation
since _STAT_VER_LINUX requires a different conversion function (it uses
the kernel_stat as the syscall argument since its exported ABI is
different than the kernel one for both non-LFS and LFS implementation).
The generic LFS implementation handles multiple cases:
1. XSTAT_IS_XSTAT64 being 1:
1.1. Old 64-bit kABI (ia64, powerpc64*, s390x, x86_64): it
issues __NR_stat for _STAT_VER_KERNEL or _STAT_VER_LINUX.
1.2. Old 64-bit kABI with defines __NR_stat64 instead of __NR_stat
(sparc64): it issues __NR_stat for _STAT_VER_KERNEL or
__NR_stat64 and convert to struct stat64.
1.3. New kABIs which uses generic 64-bit Linux ABI (aarch64 and
riscv64): it issues __NR_newfstatat and only for
_STAT_VER_KERNEL.
1.4. New 32-bit kABIs with only 64-bit time_t support (arc and
riscv32): it issues __NR_statx and covert to struct stat64.
2. Old ABIs with XSTAT_IS_XSTAT64 being 0:
2.1. New kABIs which uses generic pre 64-bit time Linux ABI (csky
and nios2): it issues __NR_fstatat64 for _STAT_VER_KERNEL.
2.2. Old kABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, s390, sh, mips32, powerpc32, and sparc32): it
issues __NR_stat64.
Also, two special cases requires specific LFS implementations:
1. alpha: it requires to handle _STAT_VER_KERNEL64 to call __NR_stat64
or use the kernel_stat with __NR_stat otherwise.
2. mips64: as for non-LFS implementation its ABIs differ from glibc
exported one, which requires an specific conversion function to
handle the kernel_stat.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It indicates that the glibc export stat64 is similar in size and
layout of the kernel stat64 used on the syscall. It is not currently
used on stat implementation, but the idea is to indicate whether
to use the kernel_stat to issue on the syscall on the *stat*64
variant (more specifically on mips which its exported ABI does not
match the kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Before this patch, the following tests were failing:
ppc and ppc64:
FAIL: math/test-ldouble-j0
ppc64le:
FAIL: math/test-float128-j0
FAIL: math/test-float64x-j0
FAIL: math/test-ibm128-j0
FAIL: math/test-ldouble-j0
- tst-mtx-recursive.c: mtx_init fails to use mtx_plain. Per C11
specs, using mtx_recursive alone is not supported. This isn't
catched because mtx_plain is defined as 0.
- tst-thrd-sleep.c: thrd_sleep returns 0 on success, a negative
value on failure. Testing against thrd_success is incorrect.
- tst-tss-basic.c: tss_set is incorrectly checkd for a non-0
value. The test should test aginst C11 threads error codes.
This isn't catched because thrd_success is defined as 0.
Note that all three tests fail on FreeBSD, which defines all mutex type
values, as well as all C11 threads error codes with non-0 values.
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
Without this ULP patch these 3 tests fail on i686:
FAIL: math/test-float128-j0
FAIL: math/test-float64x-j0
FAIL: math/test-ldouble-j0
CPU info:
Vendor ID: GenuineIntel
CPU family: 6
Model: 85
Model name: Intel Xeon Processor (Cascadelake)
This is the first of a series of patches to sync with Gnulib commit
615b43e1f9. This patch adopts most of the changes of Gnulib, except it
retains GETCWD_RETURN_TYPE and does not always use a 64-bit internal
API. These remaining discrepancies will be addressed in later patches
in this series.
Checked on x86_64-linux-gnu and i686-linux-gnu.
A typo in commit 107e6a3c22 causes the
FMA4 code path to be taken on systems that support FMA, even if they do
not support FMA4. Fix this to detect FMA4.
The pthread_cond_clockwait and pthread_cond_timedwait have been converted
to support 64 bit time.
This change introduces new futex_abstimed_wait_cancelable64 function in
./sysdeps/nptl/futex-helpers.c, which uses futex_time64 where possible
and tries to replace low-level preprocessor macros from
lowlevellock-futex.h
The pthread_cond_{clock|timed}wait only accepts absolute time. Moreover,
there is no need to check for NULL passed as *abstime pointer as
__pthread_cond_wait_common() always passes non-NULL struct __timespec64
pointer to futex_abstimed_wait_cancellable64().
For systems with __TIMESIZE != 64 && __WORDSIZE == 32:
- Conversions between 64 bit time to 32 bit are necessary
- Redirection to __pthread_cond_{clock|timed}wait64 will provide support
for 64 bit time
The futex_abstimed_wait_cancelable64 function has been put into a separate
file on the purpose - to avoid issues apparent on the m68k architecture
related to small number of available registers (there is not enough
registers to put all necessary arguments in them if the above function
would be added to futex-internal.h with __always_inline attribute).
In fact - new function - namely __futex_abstimed_wait_cancellable32 is
used to reduce number of needed registers (as some in-register values are
stored on the stack when function call is made).
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without
to test the proper usage of both __pthread_cond_{clock|timed}wait64 and
__pthread_cond_{clock|timed}wait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
X32 uses the same 64-bit syscall interface for set_thread_area. But
__NR_set_thread_area is missing from <asm/unistd_x32.h>. A kernel patch
was submitted:
From 7b05d5b43ae2545e0d4a3edb24205d18bc883626 Mon Sep 17 00:00:00 2001
From: "H.J. Lu" <hjl.tools@gmail.com>
Date: Sat, 15 Aug 2020 10:34:00 -0700
Subject: [PATCH] x86-64: Enable x32 set_thread_area
X32 uses the common 64-bit syscall interface for set_thread_area. Add
<fixup-asm-unistd.h> to provide __NR_set_thread_area.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
On some microarchitectures performance of the backwards memmove improves if
the stores use STR with decreasing addresses. So change the memmove loop
in memcpy_advsimd.S to use 2x STR rather than STP.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch lays out the top-level organisation of the RISC-V 32-bit port.
It provides all the Implies files as well as various other fragments of
the build infrastructure.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Specify the minimum kernel version for RISC-V 32-bit as the 5.4 kernel.
We require this commit: "waitid: Add support for waiting for the current
process group" for the kernel as it adds support for the P_PGID id for
the waitid syscall. Without this patch we can't replace the wait4
syscall on 64-bit time_t only systems.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Conversions from a float to a long long on 32-bit RISC-V (RV32) may not
raise the correct exceptions on overflow, it also may raise spurious
"inexact" exceptions on non overflow cases. This patch fixes the
problem, similarly to the fix for MIPS, ARM and S390.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Add a libm-test-ulps for RV32, this is the same as the RV64 one.
This dosn't match what is generated by running `make regen-ulps` on RV32
QEMU, but the current in tree RV64 doesn't match that either.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
This patch adds the ABI implementation for 32-bit RISC-V. It contains
the Linux-specific and RISC-V architecture code.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
With RV32 support the list of possible RISC-V system directories
increases to:
- /lib64/lp64d
- /lib64/lp64
- /lib32/ilp32d
- /lib32/ilp32
- /lib (only ld.so)
This patch changes the add_system_dir () macro to support the new ilp32d
and ilp32 directories for RV32. While refactoring this code let's split
out the confusing if statements into a loop to make it easier to
understand and extend.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
sysdep.h redefines only the syscall where the generic implementation
still does not have actual 64-bit time_t support:
/* Workarounds for generic code needing to handle 64-bit time_t. */
/* Fix sysdeps/unix/sysv/linux/clock_getcpuclockid.c. */
#define __NR_clock_getres __NR_clock_getres_time64
/* Fix sysdeps/nptl/lowlevellock-futex.h. */
#define __NR_futex __NR_futex_time64
[...]
This patch also adds a comment that it is a workaround to handle 64-bit
time_t and on each #define comment for which implementation it intends
to.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Remove a duplicate inclusion of <sysdeps/unix/sysdep.h> which is already
pulled via <sysdeps/unix/sysv/linux/generic/sysdep.h>, and the inclusion
of <errno.h> whose definition of `__set_errno' is not needed here.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Using the original glibc headers under bits/ let's make small
modifications to use 64-bit time_t and off_t for both RV32 and RV64.
For the typesizes.h, here are justifications for the changes from the
generic version (based on Arnd's very helpful feedback):
- All the !__USE_FILE_OFFSET64 types (__off_t, __ino_t, __rlim_t, ...)
are changed to match the 64-bit replacements.
- __time_t is defined to 64 bit, but no __time64_t is added. This makes
sense as we don't have the time64 support for other 32-bit
architectures yet, and it will be easy to change when that happens.
- __suseconds_t is 64-bit. This matches what we use the kernel ABI for
the few drivers that are relying on 'struct timeval' input arguments
in ioctl, as well as the adjtimex system call. It means that timeval
has to be defined without the padding, unlike timespec, which needs
padding.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
With arch-syscall.h it can now assumes the existance of either
__NR_utimensat or __NR_utimensat_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_settime or __NR_time_settime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_gettime or __NR_time_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_sched_rr_get_interval or __NR_sched_rr_get_interval_time64.
The 32-bit time_t support is now only build for
!__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_ppoll or __NR_ppoll_time64. The 32-bit time_t support is now
only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedsend or __NR_mq_timedsend_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedreceive or __NR_mq_timedreceive_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_settime or __NR_clock_settime_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_nanosleep or __NR_clock_nanosleep_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_gettime or __NR_clock_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
It also uses the time64-support functions to simplify it further.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
With arch-syscall.h it can now assumes the existance of either
__NR_clock_adjtime or __NR_clock_adjtime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
These helper functions are used to optimize the 64-bit time_t support on
configurations that requires support for 32-bit time_t fallback
(!__ASSUME_TIME64_SYSCALLS). The idea is once the kernel advertises that
it does not have 64-bit time_t support, glibc will stop to try issue the
64-bit time_t syscall altogether.
For instance:
#ifndef __NR_symbol_time64
# define __NR_symbol_time64 __NR_symbol
#endif
int r;
if (supports_time64 ())
{
r = INLINE_SYSCALL_CALL (symbol, ...);
if (r == 0 || errno != ENOSYS)
return r;
mark_time64_unsupported ();
}
#ifndef __ASSUME_TIME64_SYSCALLS
<32-bit fallback syscall>
#endif
return r;
On configuration with default 64-bit time_t this optimization should be
optimized away by the compiler resulting in no overhead.
Unfortunately some HWCAP names like HWCAP_S390_VX differs between
kernel (see <kernel>/arch/s390/include/asm/elf.h) and glibc.
Therefore, those HWCAP names from kernel are now introduced as alias
This patch updates the kernel version in the test tst-mman-consts.py
to 5.8. (There are no new MAP_* constants covered by this test in 5.8
that need any other header changes.)
Tested with build-many-glibcs.py.
The pthread_clockjoin_np and pthread_timedjoin_np have been converted to
support 64 bit time.
This change introduces new futex_timed_wait_cancel64 function in
./sysdeps/nptl/futex-internal.h, which uses futex_time64 where possible
and tries to replace low-level preprocessor macros from
lowlevellock-futex.h
The pthread_{timed|clock}join_np only accept absolute time. Moreover,
there is no need to check for NULL passed as *abstime pointer as
clockwait_tid() always passes struct __timespec64.
For systems with __TIMESIZE != 64 && __WORDSIZE == 32:
- Conversions between 64 bit time to 32 bit are necessary
- Redirection to __pthread_{clock|timed}join_np64 will provide support
for 64 bit time
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without
to test the proper usage of both __pthread_{timed|clock}join_np64 and
__pthread_{timed|clock}join_np.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This provides correct AT_EACCESS handling and also takes
Linux security modules into account.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list
and regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
Making the brk start exactly at the end of the main application binary was
requiring to get it through the _end symbol, which does not work any more
with recent toolchains, and actually produces in libc.so a confusing
external _end symbol that produces odd results, see
https://sourceware.org/bugzilla/show_bug.cgi?id=23499
Trying to do so is quite outdated anyway with the tendency for address
randomization.
Using _end was also allowing to include the main binary data within
the RLIMIT_DATA, but this also seems outdated with dynamic library
loading, and nowadays' memory consumption via malloc and mmap rather than
statically-allocated data.
This adds a BRK_START macro in <vm_param.h> that just tells where we
want to start the brk, and thus removes the _end symbol.
* sysdeps/mach/hurd/i386/vm_param.h: New file.
* sysdeps/mach/hurd/brk.c: Use BRK_START as brk start instead of _end.
Also ignore __data_start.
* hurd/Versions: Remove _end symbol.
* sysdeps/mach/hurd/i386/libc.abilist: Remove _end symbol.
Intel64 and IA-32 Architectures Software Developer’s Manual has changed
the following CPU feature names:
1. The CPU feature of Enhanced Intel SpeedStep Technology is renamed
from EST to EIST.
2. The CPU feature which supports Platform Quality of Service Monitoring
(PQM) capability is changed to Intel Resource Director Technology
(Intel RDT) Monitoring capability, i.e. PQM is renamed to RDT_M.
3. The CPU feature which supports Platform Quality of Service
Enforcement (PQE) capability is changed to Intel Resource Director
Technology (Intel RDT) Allocation capability, i.e. PQE is renamed to
RDT_A.
__GLRO loaded the word after the requested variable on big-endian
PowerPC, where LOWORD is 4. This can cause the memset implement
go wrong because the masking with the cache line size produces
wrong results, particularly if the loaded value happens to be 1.
The __GLRO macro is not used in any place where loading the lower
32-bit word of a 64-bit value is desired, so the +4 offset is always
wrong.
Fixes commit 18363b4f01
("powerpc: Move cache line size to rtld_global_ro") and bug 26332.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Make glibc MTE-safe on systems where MTE is available. This allows
using heap tagging with an LD_PRELOADed malloc implementation that
enables MTE. We don't document this as guaranteed contract yet, so
glibc may not be MTE safe when HWCAP2_MTE is set (older glibcs
certainly aren't). This is mainly for testing and debugging.
The HWCAP flag is not exposed in public headers until Linux adds it
to its uapi. The HWCAP value reservation will be in Linux 5.9.
Use PROT_READ and PROT_WRITE according to the load segment p_flags
when adding PROT_BTI.
This is before processing relocations which may drop PROT_BTI in
case of textrels. Executable stacks are not protected via PROT_BTI
either. PROT_BTI is hardening in case memory corruption happened,
it's value is reduced if there is writable and executable memory
available so missing it on such memory is fine, but we should
respect the p_flags and should not drop PROT_WRITE.
Add a line that was missing from a previous commit.
Without increasing str, the null-byte is not validated, and
_dl_string_platform returns -1.
Fixes: d2ba3677da ("powerpc: Add support for POWER10")
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Upstream GCC 11 development is now building the ibm128 runtime
support (in libgcc) without a .gnu.attributes section on ppc64le.
Ensure we have one to replace by building one ibm128 file in
libc and libm with attributes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
When e.g. an LD_PRELOAD fails, _dl_signal_exception/error longjmps, but TLS
is not initialized yet, let along signal state. We thus mustn't look at
them within __longjmp.
* sysdeps/mach/hurd/i386/____longjmp_chk.S,__longjmp.S: Check for
initialized value of %gs, and that sigstate is non-NULL.
Optimize strlen using a mix of scalar and SIMD code. On modern micro
architectures large strings are 2.6 times faster than existing
strlen_asimd and 35% faster than the new MTE version of strlen.
On a random strlen benchmark using small sizes the speedup is 7% vs
strlen_asimd and 40% vs the MTE strlen. This fixes the main strlen
regressions on Cortex-A53 and other cores with a simple Neon unit.
Rename __strlen_generic to __strlen_mte, and select strlen_asimd when
MTE is not enabled (this is waiting on support for a HWCAP_MTE bit).
This fixes big-endian bug 25824. Passes GLIBC regression tests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The arm string/tst-memmove-overflow XFAIL has been added in commit
eca1b23332 ("arm: XFAIL string/tst-memmove-overflow due to bug 25620")
as a way to reproduce the reported bug.
Now that this bug has been fixed in commits 79a4fa341b ("arm:
CVE-2020-6096: fix memcpy and memmove for negative length [BZ #25620]")
and beea361050 ("arm: CVE-2020-6096: Fix multiarch memcpy for negative
length [BZ #25620]"), let's remove the XFAIL.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add a new memcpy using 128-bit Q registers - this is faster on modern
cores and reduces codesize. Similar to the generic memcpy, small cases
include copies up to 32 bytes. 64-128 byte copies are split into two
cases to improve performance of 64-96 byte copies. Large copies align
the source rather than the destination.
bench-memcpy-random is ~9% faster than memcpy_falkor on Neoverse N1,
so make this memcpy the default on N1 (on Centriq it is 15% faster than
memcpy_falkor).
Passes GLIBC regression tests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Given almost all uses of ENTRY are for string/memory functions,
align ENTRY to a cacheline to simplify things.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Support usable check for all CPU features with the following changes:
1. Change struct cpu_features to
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
so that there is a usable bit for each cpuid bit.
2. After the cpuid bits have been initialized, copy the known bits to the
usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for
CPU feature detection.
3. Clear the usable bits which require OS support.
4. If the feature is supported by OS, copy its cpuid bit to its usable
bit.
5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE
and CPU_FEATURE_USABLE_P to check if a feature is usable.
6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13.
7. Unset MPX feature since it has been deprecated.
The results are
1. If the feature is known and doesn't requre OS support, its usable bit
is copied from the cpuid bit.
2. Otherwise, its usable bit is copied from the cpuid bit only if the
feature is known to supported by OS.
3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the
feature can be used.
4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports
the feature.
Since
commit 430388d5dc
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Aug 3 08:04:49 2018 -0700
x86: Don't include <init-arch.h> in assembly codes
removed all usages of <init-arch.h> from assembly codes, we can remove
__ASSEMBLER__ check in init-arch.h.
Since
commit c867597bff
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Jun 8 13:57:50 2016 -0700
X86-64: Remove previous default/SSE2/AVX2 memcpy/memmove
removed the only usage of __x86_prefetchw, we can remove the unused
__x86_prefetchw.
A big shoutout to Cupertino Miranda <cmiranda@synopsys.com> for his
valuable contribution in initial bringup and debugging on Linux and
later in solving pesky unwinding/cancelation failures in testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Teach the linker that __mcount_internal, __sigjmp_save_symbol,
__syscall_error and __GI_exit do not use r2, so that it does not need to
recover r2 after the call.
Test at configure time if the assembler supports @notoc and define
USE_PPC64_NOTOC.
Make the instructions for syscall list generation match Makefile and
refer to `update-syscall-lists'; there has been no `update-arch-syscall'
target. Also use single quotes around the command to stick to the ASCII
character set.
Fixes 4cf0d22305 ("Linux: Add tables with system call numbers").
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
To provide a y2038 safe interface a new symbol __shmctl64 is added
and __shmctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_shmid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, and sparc32) require specific implementations
due to their kernel ABI.
2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit shmctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes shmid_ds already contains
64-bit time_t fields and will result in just the __shmctl symbol
using the __shmctl64 code. The shmid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using of the 64-bit one.
The default 32-bit symbol will allocate and copy the shmid_ds
over multiple buffers, but this should be deprecated in favor
of the __shmctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Each architecture overrides the struct msqid_ds which its required
kernel ABI one.
Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa,
mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le,
powerpc64, and powerpc.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This will allow us to have architectures specify their own version.
Not semantic changes expected. Checked with a build against the
all affected ABIs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To provide a y2038 safe interface a new symbol __msgctl64 is added
and __msgctl is change to call it instead (it adds some extra buffer
coping for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_msqid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386, mips,
powerpc32, and sparc32) require specific implementations due to
their kernel ABI.
2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit msgctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes msqid_ds already contains
64-bit time_t fields and will result in just the __msgctl symbol
using the __msgctl64 code. The msgid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support using
the 64-bit time_t.
The default 32-bit symbol will allocate and copy the msqid_ds
over multiple buffers, but this should be deprecated in favor
of the __msgctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Each architecture overrides the struct msqid_ds which its required
kernel ABI one.
Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa,
mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le,
powerpc64, and powerpc.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
This will allow us to have architectures specify their own version.
Not semantic changes expected. Checked with a build against the
all affected ABIs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Different than others 64-bit time_t syscalls, the SysIPC interface
does not provide a new set of syscall for y2038 safeness. Instead it
uses unused fields in semid_ds structure to return the high bits for
the timestamps.
To provide a y2038 safe interface a new symbol __semctl64 is added
and __semctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_semid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, sparc32) require specific implementations due
their kernel ABI.
2. semid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit semctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes semid_ds already contains
64-bit time_t fields and will result in just the __semctl symbol
using the __semctl64 code. The semid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low handling.
It might be possible to optimize it further to avoid the
kernel_semid64_ds to semun transformation if the exported ABI
for the architectures matches the expected kernel ABI, but the
implementation is already complex enough and don't think this
should be a hotspot in any case.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using the 64-bit one.
The default 32-bit symbol will allocate and copy the semid_ds
over multiple buffers, but this should be deprecated in favor
of the __semctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
RETURN_ADDRESS is used at several places in glibc to mean a valid
code address of the call site, but with pac-ret it may contain a
pointer authentication code (PAC), so its definition is adjusted.
This is gcc PR target/94891: __builtin_return_address should not
expose signed pointers to user code where it can cause ABI issues.
In glibc RETURN_ADDRESS is only changed if it is built with pac-ret.
There is no detection for the specific gcc issue because it is
hard to test and the additional xpac does not cause problems.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently gcc -pg -mbranch-protection=pac-ret passes signed return
address to _mcount, so _mcount now has to always strip pac from the
frompc since that's from user code that may be built with pac-ret.
This is gcc PR target/94791: signed pointers should not escape and get
passed across extern call boundaries, since that's an ABI break, but
because existing gcc has this issue we work it around in glibc until
that is resolved. This is compatible with a fixed gcc and it is a nop
on systems without PAuth support. The bug was introduced in gcc-7 with
-msign-return-address=non-leaf|all support which in gcc-9 got renamed
to -mbranch-protection=pac-ret|pac-ret+leaf|standard.
strip_pac uses inline asm instead of __builtin_aarch64_xpaclri since
that is not a documented api and not available in all supported gccs.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use return address signing in assembly files for functions that save
LR when pac-ret is enabled in the compiler.
The GNU property note for PAC-RET is not meaningful to the dynamic
linker so it is not strictly required, but it may be used to track
the security property of binaries. (The PAC-RET property is only set
if BTI is set too because BTI implies working GNU property support.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Return address signing requires unwinder support, which is
present in libgcc since >=gcc-7, however due to bugs the
support may be broken in <gcc-10 (and similarly there may
be issues in custom unwinders), so pac-ret is not always
safe to use. So in assembly code glibc should only use
pac-ret if the compiler uses it too. Unfortunately there
is no predefined feature macro for it set by the compiler
so pac-ret is inferred from the code generation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When glibc is built with branch protection (i.e. with a gcc configured
with --enable-standard-branch-protection), all glibc binaries should
be BTI compatible and marked as such.
It is easy to link BTI incompatible objects by accident and this is
silent currently which is usually not the expectation, so this is
changed into a link error. (There is no linker flag for failing on
BTI incompatible inputs so all warnings are turned into fatal errors
outside the test system when building glibc with branch protection.)
Unfortunately, outlined atomic functions are not BTI compatible in
libgcc (PR libgcc/96001), so to build glibc with current gcc use
'CC=gcc -mno-outline-atomics', this should be fixed in libgcc soon
and then glibc can be built and tested without such workarounds.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Binaries can opt-in to using BTI via an ELF object file marking.
The dynamic linker has to then mprotect the executable segments
with PROT_BTI. In case of static linked executables or in case
of the dynamic linker itself, PROT_BTI protection is done by the
operating system.
On AArch64 glibc uses PT_GNU_PROPERTY instead of PT_NOTE to check
the properties of a binary because PT_NOTE can be unreliable with
old linkers (old linkers just append the notes of input objects
together and add them to the output without checking them for
consistency which means multiple incompatible GNU property notes
can be present in PT_NOTE).
BTI property is handled in the loader even if glibc is not built
with BTI support, so in theory user code can be BTI protected
independently of glibc. In practice though user binaries are not
marked with the BTI property if glibc has no support because the
static linked libc objects (crt files, libc_nonshared.a) are
unmarked.
This patch relies on Linux userspace API that is not yet in a
linux release but in v5.8-rc1 so scheduled to be in Linux 5.8.
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tailcalls must use x16 or x17 for the indirect branch instruction
to be compatible with code that uses BTI c at function entries.
(Other forms of indirect branches can only land on BTI j.)
Also added a BTI c at the ELF entry point of rtld, this is not
strictly necessary since the kernel does not use indirect branch
to get there, but it seems safest once building glibc itself with
BTI is supported.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
setcontext returns to the specified context via an indirect jump,
so there should be a BTI j.
In case of getcontext (and all other returns_twice functions) the
compiler adds BTI j at the call site, but swapcontext is a normal
c call that is currently not handled specially by the compiler.
So we change swapcontext such that the saved context returns to a
local address that has BTI j and then swapcontext returns to the
caller via a normal RET. For this we save the original return
address in the slot for x1 of the context because x1 need not be
preserved by swapcontext but it is restored when the context saved
by swapcontext is resumed.
The alternative fix (which is done on x86) would make swapcontext
special in the compiler so BTI j is emitted at call sites, on
x86 there is an indirect_return attribute for this, on AArch64
we would have to use returns_twice. It was decided against because
such fix may need user code updates: the attribute has to be added
when swapcontext is called via a function pointer and it breaks
always_inline functions with swapcontext.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To enable building glibc with branch protection, assembly code
needs BTI landing pads and ELF object file markings in the form
of a GNU property note.
The landing pads are unconditionally added to all functions that
may be indirectly called. When the code segment is not mapped
with PROT_BTI these instructions are nops. They are kept in the
code when BTI is not supported so that the layout of performance
critical code is unchanged across configurations.
The GNU property notes are only added when there is support for
BTI in the toolchain, because old binutils does not handle the
notes right. (Does not know how to merge them nor to put them in
PT_GNU_PROPERTY segment instead of PT_NOTE, and some versions
of binutils emit warnings about the unknown GNU property. In
such cases the produced libc binaries would not have valid
ELF marking so BTI would not be enabled.)
Note: functions using ENTRY or ENTRY_ALIGN now start with an
additional BTI c, so alignment of the following code changes,
but ENTRY_ALIGN_AND_PAD was fixed so there is no change to the
existing code layout. Some string functions may need to be
tuned for optimal performance after this commit.
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The compiler can add required elf markings based on CFLAGS
but the assembler cannot, so using C code for empty files
creates less of a maintenance problem.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Check BTI support in the compiler and linker. The check also
requires READELF that understands the BTI GNU property note.
It is expected to succeed with gcc >=gcc-9 configured with
--enable-standard-branch-protection and binutils >=binutils-2.33.
Note: passing -mbranch-protection=bti in CFLAGS when building glibc
may not be enough to get a glibc that supports BTI because crtbegin*
and crtend* provided by the compiler needs to be BTI compatible too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Using C code allows the compiler to add target specific object file
markings based on CFLAGS.
The arm specific abi-note.S is removed and similar object file fix
up will be avoided on AArch64 with standard branch protection.
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy.
This commit fixes the armv7 version.
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy and memmove.
This commit fixes the generic arm implementation of memcpy amd memmove.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use snprintf instead of mempcpy plus itoa_word and remove unused
definitions. There is no potential for infinite recursion because
snprintf only use strerror_r for the %m specifier.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The buffer allocation uses the same strategy of strsignal.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The per-thread state is refactored two use two strategies:
1. The default one uses a TLS structure, which will be placed in the
static TLS space (using __thread keyword).
2. Linux allocates via struct pthread and access it through THREAD_*
macros.
The default strategy has the disadvantage of increasing libc.so static
TLS consumption and thus decreasing the possible surplus used in
some scenarios (which might be mitigated by BZ#25051 fix).
It is used only on Hurd, where accessing the thread storage in the in
single thread case is not straightforward (afaiu, Hurd developers could
correct me here).
The fallback static allocation used for allocation failure is also
removed: defining its size is problematic without synchronizing with
translated messages (to avoid partial translation) and the resulting
usage is not thread-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The __NSIG_WORDS value is based on minimum number of words to hold
the maximum number of signals supported by the architecture.
This patch also adds __NSIG_BYTES, which is the number of bytes
required to represent the supported number of signals. It is used in
syscalls which takes a sigset_t.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It refactor how signals are defined by each architecture. Instead of
include a generic header (bits/signum-generic.h) and undef non-default
values in an arch specific header (bits/signum.h) the new scheme uses a
common definition (bits/signum-generic.h) and each architectures add
its specific definitions on a new header (bits/signum-arch.h).
For Linux it requires copy some system default definitions to alpha,
hppa, and sparc. They are historical values and newer ports uses
the generic Linux signum-arch.h.
For Hurd the BSD signum is removed and moved to a new header (it is
used currently only on Hurd).
Checked on a build against all affected ABIs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables
to update thresholds for "rep movsb" and "rep stosb" at run-time.
Note that the user specified threshold for "rep movsb" smaller than
the minimum threshold will be ignored.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In TS 18661-1, getpayload had an unspecified return value for a
non-NaN argument, while C2x requires the return value -1 in that case.
This patch implements the return value of -1. I don't think this is
worth having a new symbol version that's an alias of the old one,
although occasionally we do that in such cases where the new function
semantics are a refinement of the old ones (to avoid programs relying
on the new semantics running on older glibc versions but not behaving
as intended).
Tested for x86_64 and x86; also ran math/ tests for aarch64 and
powerpc.
An extension called extended feature disable (XFD) is an extension added
for Intel AMX to the XSAVE feature set that allows an operating system
to enable a feature while preventing specific user threads from using
the feature.
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
These tests validate that rseq is registered from various execution
contexts (main thread, destructor, other threads, other threads created
from destructor, forked process (without exec), pthread_atfork handlers,
pthread setspecific destructors, signal handlers, atexit handlers).
tst-rseq.c only links against libc.so, testing registration of rseq in
a non-multithreaded environment.
tst-rseq-nptl.c also links against libpthread.so, testing registration
of rseq in a multithreaded environment.
See the Linux kernel selftests for extensive rseq stress-tests.
When available, use the cpu_id field from __rseq_abi on Linux to
implement sched_getcpu(). Fall-back on the vgetcpu vDSO if unavailable.
Benchmarks:
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading
glibc sched_getcpu(): 13.7 ns (baseline)
glibc sched_getcpu() using rseq: 2.5 ns (speedup: 5.5x)
inline load cpuid from __rseq_abi TLS: 0.8 ns (speedup: 17.1x)
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
The time argument is NULL in this case, and attempt to convert it
leads to a null pointer dereference.
This fixes commit d2e3b697da
("y2038: linux: Provide __settimeofday64 implementation").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.7. (There are no new constants covered by this test in 5.7 that
need any other header changes; there's a new MREMAP_DONTUNMAP, but
this test doesn't yet cover MREMAP_*.)
Tested with build-many-glibcs.py.
1. Add the directories to hold POWER10 files.
2. Add support to select POWER10 libraries based on AT_PLATFORM.
3. Let submachine=power10 be set automatically.
* hurd/hurdselect.c: Include <sysdep-cancel.h>.
(_hurd_select): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/accept4.c: Include <sysdep-cancel.h>.
(__libc_accept4): Surround call to __socket_accept with enabling async cancel,
and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/connect.c: Include <sysdep-cancel.h>.
(__connect): Surround call to __file_name_lookup and __socket_connect
with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
* sysdeps/mach/hurd/fdatasync.c: Include <sysdep-cancel.h>.
(fdatasync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/fsync.c: Include <sysdep-cancel.h>.
(fsync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/ioctl.c: Include <sysdep-cancel.h>.
(__ioctl): When request is TIOCDRAIN, surround call to send_rpc with enabling
async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_object_sync with enabling async cancel.
* sysdeps/mach/hurd/sigsuspend.c: Include <sysdep-cancel.h>.
(__sigsuspend): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/sigwait.c: Include <sysdep-cancel.h>.
(__sigwait): Surround wait code with enabling async cancel.
* sysdeps/mach/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_msync with enabling async cancel.
* sysdeps/mach/sleep.c: Include <sysdep-cancel.h>.
(__sleep): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/usleep.c: Include <sysdep-cancel.h>.
(usleep): Surround call to __vm_msync with enabling async cancel.
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add fcntl_nocancel.
* sysdeps/mach/hurd/fcntl.c [NOCANCEL]: Include <not-cancel.h>.
[!NOCANCEL]: Include <sysdep-cancel.h>.
(__libc_fcntl) [!NOCANCEL]: Surround __file_record_lock call with enabling async cancel, and use HURD_FD_PORT_USE_CANCEL instead of HURD_FD_PORT_USE.
* sysdeps/mach/hurd/fcntl_nocancel.c: New file, defines __fcntl_nocancel by including fcntl.c.
* sysdeps/mach/hurd/not-cancel.h (__fcntl64_nocancel): Replace macro with
__fcntl_nocancel declaration with hidden proto, and make
__fcntl64_nocancel call __fcntl_nocancel.
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add wait4_nocancel.
* sysdeps/mach/hurd/wait4.c: Include <sysdep-cancel.h>
(__wait4): Surround __proc_wait with enabling async cancel, and use
__USEPORT_CANCEL instead of __USEPORT.
* sysdeps/mach/hurd/wait4_nocancel.c: New file, contains previous
implementation of __wait4.
* sysdeps/mach/hurd/not-cancel.h (__waitpid_nocancel): Replace macro with
__wait4_nocancel declaration with hidden proto, and make
__waitpid_nocancel call __wait4_nocancel.
HURD_*PORT_USE link fd and port with a stack-stored structure, so on
thread cancel we need to cleanup this.
* hurd/fd-cleanup.c: New file.
* hurd/port-cleanup.c (_hurd_port_use_cleanup): New function.
* hurd/Makefile (routines): Add fd-cleanup.
* sysdeps/hurd/include/hurd.h (__USEPORT_CANCEL): New macro.
* sysdeps/hurd/include/hurd/fd.h (_hurd_fd_port_use_data): New
structure.
(_hurd_fd_port_use_cleanup): New prototype.
(HURD_DPORT_USE_CANCEL, HURD_FD_PORT_USE_CANCEL): New macros.
* sysdeps/hurd/include/hurd/port.h (_hurd_port_use_data): New structure.
(_hurd_port_use_cleanup): New prototype.
(HURD_PORT_USE_CANCEL): New macro.
* hurd/hurd/fd.h (HURD_FD_PORT_USE): Also refer to HURD_FD_PORT_USE_CANCEL.
* hurd/hurd.h (__USEPORT): Also refer to __USEPORT_CANCEL.
* hurd/hurd/port.h (HURD_PORT_USE): Also refer to HURD_PORT_USE_CANCEL.
* hurd/fd-read.c (_hurd_fd_read): Call HURD_FD_PORT_USE_CANCEL instead
of HURD_FD_PORT_USE.
* hurd/fd-write.c (_hurd_fd_write): Likewise.
* sysdeps/mach/hurd/send.c (__send): Call HURD_DPORT_USE_CANCEL instead
of HURD_DPORT_USE.
* sysdeps/mach/hurd/sendmsg.c (__libc_sendmsg): Likewise.
* sysdeps/mach/hurd/sendto.c (__sendto): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Likewise.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Call __USEPORT_CANCEL
instead of __USEPORT, and HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
This adds sysdeps/htl/libc-lock.h which augments sysdeps/mach/libc-lock.h with
the htl-aware cleanup handling. Otherwise inclusion of libc-lock.h
without libc-lockP.h would keep only the mach-aware handling.
This also fixes cleanup getting called when the binary is
statically-linked without libpthread.
* sysdeps/htl/libc-lockP.h (__libc_cleanup_region_start,
__libc_cleanup_end, __libc_cleanup_region_end,
__pthread_get_cleanup_stack): Move to...
* sysdeps/htl/libc-lock.h: ... new file.
(__libc_cleanup_region_start): Always set handler and arg.
(__libc_cleanup_end): Always call the cleanup handler.
(__libc_cleanup_push, __libc_cleanup_pop): New macros.
These only need exactly to use __libc_ptf_call.
* sysdeps/htl/flockfile.c: Include <libc-lockP.h> instead of
<libc-lock.h>
* sysdeps/htl/ftrylockfile.c: Include <libc-lockP.h> instead of
<errno.h>, <pthread.h>, <stdio-lock.h>
* sysdeps/htl/funlockfile.c: Include <libc-lockP.h> instead of
<pthread.h> and <stdio-lock.h>
Like hurd_thread_cancel does.
* sysdeps/mach/hurd/htl/pt-docancel.c: Include <hurd/signal.h>
(__pthread_do_cancel): Lock target thread's critical_section_lock and ss
lock around thread mangling.
Intel Advanced Matrix Extensions (Intel AMX) is a new programming
paradigm consisting of two components: a set of 2-dimensional registers
(tiles) representing sub-arrays from a larger 2-dimensional memory image,
and accelerators able to operate on tiles. Intel AMX is an extensible
architecture. New accelerators can be added and the existing accelerator
may be enhanced to provide higher performance. The initial features are
AMX-BF16, AMX-TILE and AMX-INT8, which are usable only if the operating
system supports both XTILECFG state and XTILEDATA state.
Add AMX-BF16, AMX-TILE and AMX-INT8 support to HAS_CPU_FEATURE and
CPU_FEATURE_USABLE.
It turned out that an 256b-mvc instruction which depends on the
result of a previous 256b-mvc instruction is counterproductive.
Therefore this patch adjusts the 256b-loop by storing the
first byte with stc and setting the remaining 255b with mvc.
Now the 255b-mvc instruction depends on the stc instruction.
This patch introduces an extra loop without pfd instructions
as it turned out that the pfd instructions are usefull
for copies >=64KB but are counterproductive for smaller copies.
* sysdeps/htl/sem-timedwait.c (struct cancel_ctx): Add cancel_wake
field.
(cancel_hook): When unblocking thread, set cancel_wake field to 1.
(__sem_timedwait_internal): Set cancel_wake field to 0 by default.
On cancellation exit, check whether we hold a token, to be put back.
By aligning its implementation on pthread_cond_wait.
* sysdeps/htl/sem-timedwait.c (cancel_ctx): New structure.
(cancel_hook): New function.
(__sem_timedwait_internal): Check for cancellation and register
cancellation hook that wakes the thread up, and check again for
cancellation on exit.
* nptl/tst-cancel13.c, nptl/tst-cancelx13.c: Move to...
* sysdeps/pthread/: ... here.
* nptl/Makefile: Move corresponding references and rules to...
* sysdeps/pthread/Makefile: ... here.
Since __pthread_exit does not return, we do not need to indent the
noncancel path
* sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal):
Move cancelled path before non-cancelled path, to avoid "else"
indentation.
* nptl/tst-cancel25.c: Move to...
* sysdeps/pthread/tst-cancel25.c: ... here.
(tf2) Do not test for SIGCANCEL when it is not defined.
* nptl/Makefile: Move corresponding reference to...
* sysdeps/pthread/Makefile: ... here.
Linux commit ID ee988c11acf6f9464b7b44e9a091bf6afb3b3a49 reserved 2 new
bits in AT_HWCAP2:
- PPC_FEATURE2_ARCH_3_1 indicates the availability of the POWER ISA
3.1;
- PPC_FEATURE2_MMA indicates the availability of the Matrix-Multiply
Assist facility.
Add support for MTE to strncmp. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Co-authored-by: Branislav Rankov <branislav.rankov@arm.com>
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Add support for MTE to strcmp. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Co-authored-by: Branislav Rankov <branislav.rankov@arm.com>
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Add support for MTE to strrchr. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Add support for MTE to memrchr. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Co-authored-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
