Improve performance by handling another 16 bytes before entering the loop.
Use ADDHN in the loop to avoid SHRN+FMOV when it terminates. Change final
size computation to avoid increasing latency. On Neoverse V1 performance
of the random strlen benchmark improves by 4.6%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These functions are exp10m1, exp2m1, log10p1, log2p1.
Also regenerated ulps on x86_64.
For each format, there are 4 values, one for each rounding mode.
(For the intel96 format, there are 8 values, 4 for Intel hardware,
and 4 for AMD hardware. However, regen-ulps was only run on Intel.
It should be run in a separate patch on a AMD x86_64.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is a follow-up to 10de4a47ef that
reworded the manual entries for putc and putwc and removed any
performance claims.
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
As for exit, also allows concurrent quick_exit to avoid race
conditions when it is called concurrently. Since it uses the same
internal function as exit, the __exit_lock lock is moved to
__run_exit_handlers. It also solved a potential concurrent when
calling exit and quick_exit concurrently.
The test case 'expected' is expanded to a value larger than the
minimum required by C/POSIX (32 entries) so at_quick_exit() will
require libc to allocate a new block. This makes the test mre likely to
trigger concurrent issues (through free() at __run_exit_handlers)
if quick_exit() interacts with the at_quick_exit list concurrently.
This is also the latest interpretation of the Austin Ticket [1].
Checked on x86_64-linux-gnu.
[1] https://austingroupbugs.net/view.php?id=1845
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Only return __GCONV_INCOMPLETE_INPUT for a partial match when the end of
the input buffer is reached. Otherwise it is a non-match, and other
patterns should be tried.
5476f8cd2e ("htl: move pthread_self info libc.") and
9dfa256216 ("htl: move pthread_equal into libc") to
1dc0bc8f07 ("htl: move pthread_attr_setdetachstate into libc")
moved some pthread_ symbols from libpthread.so to libc.so, but missed
adding the compat version like 5476f8cd2e ("htl: move pthread_self
info libc.") did: libc already had these symbols as forwards,
but versioned GLIBC_2.21, while the symbols in libpthread.so were
versioned GLIBC_2.12.
To fix running executables built before this, we thus have to add the
GLIBC_2.12 version, otherwise execution fails with e.g.
/usr/lib/i386-gnu/libglib-2.0.so: symbol lookup error: /usr/lib/i386-gnu/libglib-2.0.so: undefined symbol: pthread_attr_setinheritsched, version GLIBC_2.12
Previous GCC versions do not support the C23 change that
allows labels on declarations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add tests for MREMAP_MAYMOVE and MREMAP_FIXED. On Linux, also test
MREMAP_DONTUNMAP.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add string/test-strncmp-nonarray and
wcsmbs/test-wcsncmp-nonarray.
This is the test that uncovered bug 31934. Test run time
is more than one minute on a fairly current system, so turn
these into xtests that do not run automatically.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This helps HotColdSplitting in GCC/LLVM.
Thought about doing `exit` as well since its only called once per
process, but since its easy to imagine a hot path leading into
`exit(0)`, its less clear if its profitable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Even if C/POSIX standard states that exit is not formally thread-unsafe,
calling it more than once is UB. The glibc already supports
it for the single-thread, and both elf/nodelete2.c and tst-rseq-disable.c
call exit from a DSO destructor (which is called by _dl_fini, registered
at program startup with __cxa_atexit).
However, there are still race issues when it is called more than once
concurrently by multiple threads. A recent Rust PR triggered this
issue [1], which resulted in an Austin Group ask for clarification [2].
Besides it, there is a discussion to make concurrent calling not UB [3],
wtih a defined semantic where any remaining callers block until the first
call to exit has finished (reentrant calls, leaving through longjmp, and
exceptions are still undefined).
For glibc, at least reentrant calls are required to be supported to avoid
changing the current behaviour. This requires locking using a recursive
lock, where any exit called by atexit() handlers resumes at the point of
the current handler (thus avoiding calling the current handle multiple
times).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
[1] https://github.com/rust-lang/rust/issues/126600
[2] https://austingroupbugs.net/view.php?id=1845
[3] https://www.openwall.com/lists/libc-coord/2024/07/24/4
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added by commit c62b758bae6af16 as a way for userspace to
check if two file descriptors refer to the same struct file.
Checked on aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py, and tst-pidfd-consts.py to 6.9.
There are no new constants covered by these tests in 6.10.
Tested with build-many-glibcs.py.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.10 changes for syscall are:
* mseal for all architectures.
* map_shadow_stack for x32.
* Replace sync_file_range with sync_file_range2 for csky (which
fixes a broken sync_file_range usage).
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The existing description for setrlimit() has some ambiguity. It could be
understood to have the semantics of getrlimit(), i.e., the limits from the
process are stored in the provided rlp pointer.
Make the description more explicit that rlp are the input values, and that
the limits of the process is changed with this function.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The manual entry for `putc' described what "most systems" do instead of
describing the glibc implementation and its guarantees. This commit
fixes that by warning that putc may be implemented as a macro that
double-evaluates `stream', and removing the performance claim.
Even though the current `putc' implementation does not double-evaluate
`stream', offering this obscure guarantee as an extension to what
POSIX allows does not seem very useful.
The entry for `putwc' is also edited to bring it in line with `putc'.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This helps compilers split the codegen for setting up the arguments
(`__expression`, `__filename`, etc...) from the potentially hot cold
where the `assert` is to a presumably cold region on the assertion
failure path.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Sam James <sam@gentoo.org>
Complement commit b03e4d7bd2 ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
Reviewed-by: DJ Delorie <dj@redhat.com>
