This patch adds S/390 versions of fegetmode and fesetmode. Untested.
* sysdeps/s390/fpu/fegetmode.c: New file.
* sysdeps/s390/fpu/fesetmode.c: Likewise.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too.
This patch uses z196 zarch load rounded instruction which can suppress
FE_INEXACT exception if gcc has z196 support in used configuration.
Otherwise FE_INEXACT flag is set as before. The gcc support is tested
in a new configure-check.
A comment in fsetexcptflg.c is corrected as new exceptions are not
executed with the next floating-point instruction if fpc is set with
_FPU_SETCW macro. It seems the comment was copied e.g. from
sysdeps/x86_64/fpu/fsetexcptflg.c file.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT):
New undefine.
* sysdeps/s390/configure.ac: Add test for z196 zarch support.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra
instruction for raising over-/underflow if z196 zarch is supported
by default.
* sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag):
Correct comment.
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.
This patch implements this function for glibc. Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero). The only architecture
that seems to need anything different is s390.
(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)
The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.
Tested for x86_64, x86, mips64 and powerpc.
* math/fetestexceptflag.c: New file.
* sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by
Stefan Liebler.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fetestexceptflag): New function declaration.
* manual/arith.texi (fetestexceptflag): Document function.
* math/Versions (fetestexceptflag): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fetestexceptflag.
(tests): Add test-fetestexceptflag.
* math/test-fetestexceptflag.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
If the default memcpy variant is called with a length of >1MB on 31bit,
r13 is clobbered as the algorithm is switching to mvcle. The mvcle code
returns without restoring r13. All other cases are restoring r13.
If memcpy is called from outside libc the ifunc resolver will only select
this variant if running on machines older than z10.
Otherwise or if memcpy is called from inside libc, this default memcpy
variant is called.
The testcase timezone/tst-tzset is triggering this issue in some combinations
of gcc versions and optimization levels.
This bug was introduced in commit 04bb21ac93
and thus is a regression compared to former glibc 2.23 release.
This patch removes the usage of r13 at all. Thus it is not saved and restored.
The base address for execute-instruction is now stored in r5 which is obtained
after r5 is not needed anymore as 256byte block counter.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy): Eliminate the usage
of r13 as it is not restored in mvcle case.
On s390, the current prelink undo code in elf_machine_lazy_rel()
has the requirement, that the plt stubs use the first got slots
after the 3 reserved ones.
In case of undoing prelink, the plt got slots are reset to the correct
addresses whithin the corresponding plt-stub. Therefore the address
is calculated by the address of the first plt-stub-address which
was written by prelink (see l->l_mach.plt) to got[1] and index of
current relocation multiplied with 32 (=size of one plt slot).
The index was calculated with ¤t-got-slot - &got[3].
This patch removes the requirement, that the plt-got-slots are
starting at got[3]. The index is now calculated with
¤t-reloc - &reloc[0]. The first struct Elf64_Rela is stored
at DT_JMPREL.
This patch is needed to prepare for partial relro support.
Ulrich Weigand suggested this approach to use DT_JMPREL - Thanks.
ChangeLog:
* sysdeps/s390/linkmap.h (struct link_map_machine):
Remove member gotplt and add member jmprel.
* sysdeps/s390/s390-32/dl-machine.h
(elf_machine_runtime_setup): Setup member jmprel with DT_JMPREL
instead of gotplt with &got[3].
(elf_machine_lazy_rel): Calculate address with reloc and jmprel.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu42 instruction, which converts from utf32 to utf16, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c: Disable cu42 instruction and report
an error in case of a value in range of an utf16 low surrogate.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu41 instruction, which converts from utf32 to utf8, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf8-utf32-z9.c: Disable cu41 instruction and report
an error in case of a value in range of an utf16 low surrogate.
This patch reworks the existing s390 64bit specific iconv modules in order
to use them on s390 31bit, too.
Thus the parts for subdirectory iconvdata in sysdeps/s390/s390-64/Makefile
were moved to sysdeps/s390/Makefile so that they apply on 31bit, too.
All those modules are moved from sysdeps/s390/s390-64 directory to sysdeps/s390.
The iso-8859-1 to/from cp037 module was adjusted, to use brct (branch relative
on count) instruction on 31bit s390 instead of brctg, because the brctg is a
zarch instruction and is not available on a 31bit kernel.
The utf modules are using zarch instructions, thus the directive machinemode
zarch_nohighgprs was added to the inline assemblies to omit the high-gprs flag
in the shared libraries. Otherwise they can't be loaded on a 31bit kernel.
The ifunc resolvers were adjusted in order to call the etf3eh or vector variants
only if zarch instructions are available (64bit kernel in 31bit compat-mode).
Furthermore some variable types were changed. E.g. unsigned long long would be
a register pair on s390 31bit, but we want only one single register.
For variables of type size_t the register contents have to be enlarged from a
32bit to a 64bit value on 31bit, because the inline assemblies uses 64bit values
in such cases.
ChangeLog:
* sysdeps/s390/s390-64/Makefile (iconvdata-subdirectory):
Move to ...
* sysdeps/s390/Makefile: ... here.
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Move to ...
* sysdeps/s390/iso-8859-1_cp037_z900.c: ... here.
(BRANCH_ON_COUNT): New define.
(TR_LOOP): Use BRANCH_ON_COUNT instead of brctg.
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Move to ...
* sysdeps/s390/utf16-utf32-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Move to ...
* sysdeps/s390/utf8-utf16-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Move to ...
* sysdeps/s390/utf8-utf32-z9.c: ... here and adjust to
run on s390-32, too.
This patch reworks the s390 specific module to convert between utf16 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
In case of converting utf 32 to utf16, the vector variant optimizes input of
2byte utf16 characters. The convert utf instruction is used if an utf16
surrogate is found.
For the other direction utf16 to utf32, the cu24 instruction can't be re-
enabled, because it does not report an error, if the input-stream consists of
a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13,
too. Thus there is only the c or the new vector variant, which can handle utf16
surrogate characters.
This patch also fixes some whitespace errors. Furthermore, the etf3eh variant is
handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and
always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf16.
Now ifunc is used to choose either the c or etf3eh (with convert utf instruction)
variants at runtime. Furthermore a new vector variant for z13 is introduced
which will be build and chosen if vector support is available at build / runtime.
In case of converting utf 8 to utf16, the vector variant optimizes input of
1byte utf8 characters. The convert utf instruction is used if a multibyte utf8
character is found.
For the other direction utf16 to utf8, the cu21 instruction can't be re-enabled,
because it does not report an error, if the input-stream consists of a single
low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too.
Thus there is only the c or the new vector variant, which can handle 1..4 byte
utf8 characters.
The c variant from utf16 to utf8 has beed fixed. If a high surrogate was at the
end of the input-buffer, then errno was set to EINVAL and the input-pointer
pointed just after the high surrogate. Now it points to the beginning of the
high surrogate.
This patch also fixes some whitespace errors. The c variant from utf8 to utf16
is now checking that tail-bytes starts with 0b10... and the value is not in
range of an utf16 surrogate.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
The vector variants optimize input of 1byte utf8 characters. The convert utf
instruction is used if a multibyte utf8 character is found.
This patch also fixes some whitespace errors. The c variants are rejecting
UTF-16 surrogates and values above 0x10ffff now.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Use ifunc to select c, etf3eh
or new vector loop-variant.
This patch reworks the s390 specific module which used the z900
translate one to one instruction. Now the g5 translate instruction is used,
because it outperforms the troo instruction.
ChangeLog:
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c (TROO_LOOP):
Rename to TR_LOOP and usage of tr instead of troo instruction.
This patch introduces a s390 specific gconv_simple.c file which provides
optimized versions for z13 with vector instructions, which will be chosen at
runtime via ifunc.
The optimized conversions can convert between internal and ascii, ucs4, ucs4le,
ucs2, ucs2le.
If the build-environment lacks vector support, then iconv/gconv_simple.c
is used wihtout any change. Otherwise iconvdata/gconv_simple.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
ChangeLog:
* sysdeps/s390/multiarch/gconv_simple.c: New File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add gconv_simple.
This patch introduces a s390 specific 8bit-generic.c file which provides an
optimized version for z13 with translate-/vector-instructions, which will be
chosen at runtime via ifunc.
If the build-environment lacks vector support, then iconvdata/8bit-generic.c
is used wihtout any change. Otherwise iconvdata/8bit-generic.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
The vector routines can only be used with charsets where the maximum UCS4 value
fits in 1 byte size. Then the hardware translate-instruction is used
to translate between up to 256 generic characters and "1 byte UCS4"
characters at once. The vector instructions are used to convert between
the "1 byte UCS4" and UCS4.
The gen-8bit.sh script in sysdeps/s390/multiarch generates the conversion
table to_ucs1. Therefore in sysdeps/s390/multiarch/Makefile is added an
override define generate-8bit-table, which is originally defined in
iconvdata/Makefile. This version calls the gen-8bit.sh in iconvdata folder
and the s390 one.
ChangeLog:
* sysdeps/s390/multiarch/8bit-generic.c: New File.
* sysdeps/s390/multiarch/gen-8bit.sh: New File.
* sysdeps/s390/multiarch/Makefile (generate-8bit-table):
New override define.
* sysdeps/s390/multiarch/iconv/skeleton.c: Likewise.
The S390 specific test checks if the gcc has support for vector registers
by compiling an inline assembly which clobbers vector registers.
On success the macro HAVE_S390_VX_GCC_SUPPORT is defined.
This macro can be used to determine if e.g. clobbering vector registers
is allowed or not.
ChangeLog:
* config.h.in (HAVE_S390_VX_GCC_SUPPORT): New macro undefine.
* sysdeps/s390/configure.ac: Add test for S390 vector register
support in gcc.
* sysdeps/s390/configure: Regenerated.
This patch introduces a way to provide an architecture dependent gconv-modules
file. Before this patch, the gconv-modules file was normally installed from
src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the
installation recipe (with a make warning) in order to install the
gconv-module-s390 file from build-dir.
The iconvdata/Makefile provides another recipe, which copies the gconv-modules
file from src to build dir, which are used by the testcases.
Thus the testcases does not use the currently build s390-modules.
This patch uses build-dir/iconvdata/gconv-modules for installation, which
is generated by concatenating src-dir/iconvdata/gconv-modules and the
architecture specific one. The latter one can be specified by setting the variable
sysdeps-gconv-modules in sysdeps/.../Makefile.
The architecture specific gconv-modules file is emitted before the common one
because these modules aren't used in all possible conversions. E.g. the converting
from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so.
This way, the s390-Makefile does not need to override the recipe for gconv-modules
and no warning is emitted anymore.
Since we no longer support empty objpfx the conditional test in iconvdata/Makefile
is removed.
ChangeLog:
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules):
Install file from $(objpfx)gconv-modules.
($(objpfx)gconv-modules): Concatenate architecture specific file
in variable sysdeps-gconv-modules and gconv-modules in src dir.
* sysdeps/s390/gconv-modules: New file.
* sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules):
Deleted.
($(objpfx)gconv-modules-s390): Deleted.
(sysdeps-gconv-modules): New variable.
There exist optimized memcpy functions on s390, but no optimized mempcpy.
This patch adds mempcpy entry points in memcpy.S files, which
use the memcpy implementation. Now mempcpy itself is also an IFUNC function
as memcpy is and the variants are listed in ifunc-impl-list.c.
The s390 string.h does not define _HAVE_STRING_ARCH_mempcpy.
Instead mempcpy string/string.h inlines memcpy() + n.
If n is constant and small enough, GCC emits instructions like mvi or mvc
and avoids the function call to memcpy.
If n is not constant, then memcpy is called and n is added afterwards.
If _HAVE_STRING_ARCH_mempcpy would be defined, mempcpy would be called in
every case.
According to PR70140 "Inefficient expansion of __builtin_mempcpy"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70140) GCC should handle a
call to mempcpy in the same way as memcpy. Then either the mempcpy macro
in string/string.h has to be removed or _HAVE_STRING_ARCH_mempcpy has to
be defined for S390.
ChangeLog:
[BZ #19765]
* sysdeps/s390/mempcpy.S: New File.
* sysdeps/s390/multiarch/mempcpy.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add mempcpy.
* sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Add mempcpy variants.
* sysdeps/s390/s390-32/memcpy.S: Add mempcpy entry point.
(memcpy): Adjust to be usable from mempcpy entry point.
(__memcpy_mvcle): Likewise.
* sysdeps/s390/s390-64/memcpy.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add entry points
____mempcpy_z196, ____mempcpy_z10 and add __GI_ symbols for mempcpy.
(__memcpy_z196): Adjust to be usable from mempcpy entry point.
(__memcpy_z10): Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
On s390, the memcpy, memcmp, memset functions are IFUNC symbols,
which are created with s390_libc_ifunc-macro.
This macro creates a __GI_ symbol which is set to the
ifunced symbol. Thus calls within libc.so to e.g. memcpy
result in a call to *ABS*+0x954c0@plt stub and afterwards
to the resolved memcpy-ifunc-variant.
This patch sets the __GI_ symbol to the default-ifunc-variant
to avoid the plt call. The __GI_ symbols are now created at the
default variant of ifunced function.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc):
Remove __GI_ symbol.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Add __GI_memcmp symbol.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add __GI_memcpy symbol.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Add __GI_memset symbol.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Likewise.
The __memcpy_default variant on s390 64bit calculates the number of
256byte blocks in a 64bit register and checks, if they exceed 1MB
to jump to mvcle. Otherwise a mvc-loop is used. The compare-instruction
only checks a 32bit value.
This patch uses a 64bit compare.
ChangeLog:
* sysdeps/s390/s390-64/memcpy.S (memcpy):
Use cghi instead of chi to compare 64bit value.
If more than 255 bytes should be copied, the algorithm jumps away.
Before this patch, it jumps to the mvc-loop (.L_G5_12).
Now it jumps first to the "> 1MB" check, which jumps away to
__memcpy_mvcle. Otherwise, the mvc-loop (.L_G5_12) copies the bytes.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy):
Jump to 1MB check before executing mvc-loop.
if glibc is build with -march=z900 | -march=z990,
the startup file gcrt1.o (used if you link with gcc -pg)
contains R_390_GOT12 | R_390_GOT20 relocations.
Thus, an entry in the GOT can be addressed relative to the GOT pointer
with a 12 | 20 bit displacement value.
The startup files should not contain R_390_GOT12,
R_390_GOT20 relocations, but R_390_GOTENT ones.
This patch removes the overrides of pic-ccflag and
the default pic-ccflag = -fPIC in Makeconfig
is used instead to get the R_390_GOTENT relocations in gcrt1.o.
ChangeLog:
* sysdeps/s390/s390-32/Makefile (pic-ccflag): Remove.
* sysdeps/s390/s390-64/Makefile: Likewise.
This patch uses ahi instead of aghi in 32bit _dl_runtime_resolve
to adjust the stack pointer. This is no functional change,
but a cosmetic one.
ChangeLog:
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Use ahi instead of aghi to adjust stack pointer.
Starting with z13, vector registers can also occur as argument registers.
Thus the passed input/output register structs for
la_s390_[32|64]_gnu_plt[enter|exit] functions should reflect those new
registers. This patch extends these structs La_s390_regs and La_s390_retval
and adjusts _dl_runtime_profile() to handle those fields in case of
running on a z13 machine.
ChangeLog:
* sysdeps/s390/bits/link.h: (La_s390_vr) New typedef.
(La_s390_32_regs): Append vector register lr_v24-lr_v31.
(La_s390_64_regs): Likewise.
(La_s390_32_retval): Append vector register lrv_v24.
(La_s390_64_retval): Likeweise.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_profile):
Handle extended structs La_s390_32_regs and La_s390_32_retval.
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_profile):
Handle extended structs La_s390_64_regs and La_s390_64_retval.
On s390, no fpr/vrs were saved while resolving a symbol
via _dl_runtime_resolve/_dl_runtime_profile.
According to the abi, the fpr-arguments are defined as call clobbered.
In leaf-functions, gcc 4.9 and newer can use fprs for saving/restoring gprs
instead of saving them to the stack.
If gcc do this in one of the resolver-functions, then the floating point
arguments of a library-function are invalid for the first library-function-call.
Thus, this patch saves/restores the fprs around the resolving code.
The same could occur for vector registers. Furthermore an ifunc-resolver
could also clobber the vector/floating point argument registers.
Thus this patch provides the further variants _dl_runtime_resolve_vx/
_dl_runtime_profile_vx, which are used if the kernel claims, that
we run on a machine with vector registers.
Furthermore, if _dl_runtime_profile calls _dl_call_pltexit,
the pointers to inregs-/outregs-structs were setup invalid.
Now they point to the correct location in the stack-frame.
Before branching back to the caller, the return values are now
restored instead of containing the return values of the
_dl_call_pltexit() call.
On s390-32, an endless loop occurs if _dl_call_pltexit() should be called.
Now, this code-path branches to this function instead of just after the
preceding basr-instruction.
ChangeLog:
* sysdeps/s390/s390-32/dl-trampoline.S: Include dl-trampoline.h twice
to create a non-vector/vector version for _dl_runtime_resolve and
_dl_runtime_profile. Move implementation to ...
* sysdeps/s390/s390-32/dl-trampoline.h: ... here.
(_dl_runtime_resolve) Save and restore fpr/vrs.
(_dl_runtime_profile) Save and restore vrs and fix some issues
if _dl_call_pltexit is called.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_runtime_setup):
Choose the correct resolver function if running on a machine with vx.
* sysdeps/s390/s390-64/dl-trampoline.S: Include dl-trampoline.h twice
to create a non-vector/vector version for _dl_runtime_resolve and
_dl_runtime_profile. Move implementation to ...
* sysdeps/s390/s390-64/dl-trampoline.h: ... here.
(_dl_runtime_resolve) Save and restore fpr/vrs.
(_dl_runtime_profile) Save and restore vrs and fix some issues
* sysdeps/s390/s390-64/dl-machine.h: (elf_machine_runtime_setup):
Choose the correct resolver function if running on a machine with vx.
As discussed in
https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html
the setting of _STRING_ARCH_unaligned currently controls the external
GLIBC ABI as well as selecting the use of unaligned accesses withing
GLIBC.
Since _STRING_ARCH_unaligned was recently changed for AArch64, this
would potentially break the ABI in GLIBC 2.23, so split the uses and add
_STRING_INLINE_unaligned to select the string ABI. This setting must be
fixed for each target, while _STRING_ARCH_unaligned may be changed from
release to release. _STRING_ARCH_unaligned is used unconditionally in
glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't
included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and
may change between glibc releases, it should be made private to glibc.
_STRING_ARCH_unaligned should defined in the new string_private.h heade
file which is included unconditionally from internal <string.h> for glibc
build.
[BZ #19462]
* bits/string.h (_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* include/string.h: Include <string_private.h>.
* string/bits/string2.h: Replace _STRING_ARCH_unaligned with
_STRING_INLINE_unaligned.
* sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed.
(_STRING_INLINE_unaligned): New.
* sysdeps/aarch64/string_private.h: New file.
* sysdeps/generic/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/string_private.h: Likewise.
* sysdeps/s390/string_private.h: Likewise.
* sysdeps/x86/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/bits/string.h
(_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
I've regenerated ulps from scratch for s390/s390x.
All math testcases are passing afterwards.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
I get some math test-failures on s390 for float/double/ldouble for
various lrint/lround functions like:
lrint (0x1p64): Exception "Inexact" set
lrint (-0x1p64): Exception "Inexact" set
lround (0x1p64): Exception "Inexact" set
lround (-0x1p64): Exception "Inexact" set
...
GCC emits "convert to fixed" instructions for casting floating point
values to integer values. These instructions raise invalid and inexact
exceptions if the floating point value exceeds the integer type ranges.
This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in
order to avoid a cast from floating point to integer type and raise the
invalid exception with feraiseexcept.
The ldbl-128 rint/round functions are now using the same logic.
ChangeLog:
[BZ #19486]
* sysdeps/s390/fix-fp-int-convert-overflow.h: New File.
* sysdeps/generic/fix-fp-int-convert-overflow.h
(FIX_LDBL_LONG_CONVERT_OVERFLOW,
FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define.
* sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise.
* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h:
Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl):
Avoid conversions to long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl):
Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl):
Avoid conversions to long long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl):
Likewise.
Preparation for gcc -fsplit-stack support (gcc bug #68191). The new
field is basically identical to the one on x86. Its TCB offset needs
to be constant, as it'll be hardcoded in gcc.
ChangeLog:
* sysdeps/s390/nptl/tls.h (struct tcbhead_t): Add __private_ss field.
For each function setjmp, longjmp, getcontext, there exist a symbol
<func> and a default/versioned symbol <func>@@GLIBC_2.x in the build
obj-files.
This is wrong because it should only exist an unversioned or a
default-versioned symbol with the same name in an obj-file.
Glibc can't be build with recent binutils. See the already fixed linker
bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073.
Nevertheless, this patch cleans this up.
Furthermore the BSD entry points setjmp, _setjmp were marked as weak,
but should be strong as on other architectures.
(see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an
older discussion with Andreas Schwab)
Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S,
too. But there is no change in the assembler code.
ChangeLog:
* sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp):
Don't create weak aliases,
because versioned symbols are created later.
* sysdeps/s390/s390-32/setjmp.S
(setjmp, _setjmp): Remove weak and rename to an unique name
in SHARED case due to existing versioned symbols.
* sysdeps/s390/s390-64/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S
(getcontext): Create weak alias only in non SHARED case.
* sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/linkmap.h to plain linkmap.h to follow that
convention.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/linkmap.h: Move to ...
* sysdeps/generic/linkmap.h: ...here.
* sysdeps/aarch64/bits/linkmap.h: Move to ...
* sysdeps/aarch64/linkmap.h: ...here.
* sysdeps/arm/bits/linkmap.h: Move to ...
* sysdeps/arm/linkmap.h: ...here.
* sysdeps/hppa/bits/linkmap.h: Move to ...
* sysdeps/hppa/linkmap.h: ...here.
* sysdeps/ia64/bits/linkmap.h: Move to ...
* sysdeps/ia64/linkmap.h: ...here.
* sysdeps/mips/bits/linkmap.h: Move to ...
* sysdeps/mips/linkmap.h: ...here.
* sysdeps/s390/bits/linkmap.h: Move to ...
* sysdeps/s390/linkmap.h: ...here.
* sysdeps/sh/bits/linkmap.h: Move to ...
* sysdeps/sh/linkmap.h: ...here.
* sysdeps/x86/bits/linkmap.h: Move to ...
* sysdeps/x86/linkmap.h: ...here.
* include/link.h: Include <linkmap.h> instead of <bits/linkmap.h>.
This patch fixes the build error with gcc6:
array subscript is above array bounds [-Werror=array-bounds]
While including loop.c to construct the SINGLE(LOOPFCT) method
for converting from UTF-16 to UTF-8, the bytebuf array with length
MAX_NEEDED_INPUT is used as inptr. MAX_NEEDED_INPUT defaults to
MIN_NEEDED_INPUT if not defined before including loop.c.
Thus bytebuf has a length of 2.
This patch defines MAX_NEEDED_INPUT to MAX_NEEDED_TO, which is 4.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c
(MAX_NEEDED_INPUT): New define.
(MAX_NEEDED_OUTPUT): New define.
This patch provides optimized version of memrchr with the z13 vector
instructions.
ChangeLog:
* sysdeps/s390/multiarch/memrchr-c.c: New File.
* sysdeps/s390/multiarch/memrchr-vx.S: Likewise.
* sysdeps/s390/multiarch/memrchr.c: Likewise.
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Add memrchr functions.
* sysdeps/s390/multiarch/ifunc-impl-list-common.c
(__libc_ifunc_impl_list_common): Add ifunc test for memrchr.
This patch provides optimized versions of memccpy with the z13 vector
instructions.
ChangeLog:
* sysdeps/s390/multiarch/memccpy-c.c: New File.
* sysdeps/s390/multiarch/memccpy-vx.S: Likewise.
* sysdeps/s390/multiarch/memccpy.c: Likewise.
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Add memccpy functions.
* sysdeps/s390/multiarch/ifunc-impl-list-common.c
(__libc_ifunc_impl_list_common): Add ifunc test for memccpy.
* string/memccpy.c: Use MEMCCPY if defined.
This patch provides optimized versions of strcmp and wcscmp with the z13
vector instructions.
The architecture specific string.h had a typo, which leads to ommiting the
inline version in this file if __USE_STRING_INLINES is defined.
Tested this inline version by tweaking test-strcmp.c.
ChangeLog:
* sysdeps/s390/multiarch/strcmp-vx.S: New File.
* sysdeps/s390/multiarch/strcmp.c: Likewise.
* sysdeps/s390/multiarch/wcscmp-c.c: Likewise.
* sysdeps/s390/multiarch/wcscmp-vx.S: Likewise.
* sysdeps/s390/multiarch/wcscmp.c: Likewise.
* sysdeps/s390/s390-32/multiarch/strcmp.c: Likewise.
* sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strcmp and
wcscmp functions.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc test for strcmp, wcscmp.
* string/strcmp.c (STRCMP): Define and use macro.
* benchtests/bench-wcscmp.c: New File.
* benchtests/Makefile (wcsmbs-bench): Add wcscmp.
* sysdeps/s390/bits/string.h: Fix typo: _HAVE_STRING_ARCH_strcmp
instead of _HAVE_STRING_ARCH_memchr.
This patch provides optimized versions of strlen and wcslen with the z13 vector
instructions.
The helper macro IFUNC_VX_IMPL is introduced and is used to register all
__<func>_c() and __<func>_vx() functions within __libc_ifunc_impl_list()
to the ifunc test framework.
ChangeLog:
* sysdeps/s390/multiarch/Makefile: New File.
* sysdeps/s390/multiarch/strlen-c.c: Likewise.
* sysdeps/s390/multiarch/strlen-vx.S: Likewise.
* sysdeps/s390/multiarch/strlen.c: Likewise.
* sysdeps/s390/multiarch/wcslen-c.c: Likewise.
* sysdeps/s390/multiarch/wcslen-vx.S: Likewise.
* sysdeps/s390/multiarch/wcslen.c: Likewise.
* string/strlen.c (STRLEN): Define and use macro.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(IFUNC_VX_IMPL): New macro function.
(__libc_ifunc_impl_list): Add ifunc test for strlen, wcslen.
* benchtests/Makefile (wcsmbs-bench): New variable.
(string-bench-all): Added wcsmbs-bench.
* benchtests/bench-wcslen.c: New File.
This patch introduces a s390 specific ifunc resolver macro for 32/64bit,
which chooses <func>_vx with vector instructions if HWCAP_S390_VX flag
in hwcaps is set or <func>_c if not.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h (s390_vx_libc_ifunc,
s390_vx_libc_ifunc2): New macro function.
The S390 specific test checks if the assembler has support for the new z13
vector instructions by compiling a vector instruction. The .machine and
.machinemode directives are needed to compile the vector instruction without
-march=z13 option on 31/64 bit.
On success the macro HAVE_S390_VX_ASM_SUPPORT is defined. This macro is used
to determine if the optimized functions can be build without compile errors.
If the used assembler lacks vector support, then a warning is dumped while
configuring and only the common code functions are build.
The z13 instruction support was introduced in
"[Committed] S/390: Add support for IBM z13."
(https://sourceware.org/ml/binutils/2015-01/msg00197.html)
ChangeLog:
* config.h.in (HAVE_S390_VX_ASM_SUPPORT): New macro undefine.
* sysdeps/s390/configure.ac: Add test for S390 vector instruction
assembler support.
* sysdeps/s390/configure: Regenerated.
The new IBM z13 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented to 8,
because it was not incremented by commit
"S/390: Sync AUXV capabilities and archs with kernel".
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add z13.
* sysdeps/s390/dl-procinfo.h (_DL_PLATFORMS_COUNT): Increased.
The HWCAP_S390_VX flag in hwcap field of auxiliary vector indicates
if the vector facility is available and the kernel is aware of it.
This can be tested with LD_SHOW_AUXV=1 <prog>.
Currently it does not show te, because it was not incremented
by commit "S/390: Add hwcap value for transactional execution.".
Thus _DL_HWCAP_COUNT is incremented by two.
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_platforms): Add vector flag.
* sysdeps/s390/dl-procinfo.h: Add vector capability.
* sysdeps/unix/sysv/linux/s390/bits/hwcap.h (HWCAP_S390_VX): Define.
On s390 all ifunc resolvers were implemented in multiarch/ifunc-resolve.c.
The resulting single object files has undefined references to all ifunc-functions.
This patch introduces one multiarch/<func>.c file for each of memcpy, memcmp
and memset with the function specific ifunc resolver. The different function
implementations are now implemented in multiarch/<func>-s390x.S
(moved from multiarch/<func>.S).
The new multiarch/ifunc-resolve.h file contains the ifunc-resolver macro
and other helper-macros. They are merged and are now used in common for
32/64bit. Therefore the __<func>_g5/__<func>_z900 functions were renamed to
__<func>_default.
This patch also enables testing the ifunc implementations by implementing
the function __libc_ifunc_impl_list. It uses the helper-macros of ifunc-resolve.h.
ChangeLog:
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove ifunc-resolve, add memset-s390, memcpy-s390, memcmp-s390.
* sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Delete File.
* sysdeps/s390/s390-32/multiarch/memcmp.S: Move to ...
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: ... here.
(memcmp, bcmp): Use __memcmp_default as alias source.
* sysdeps/s390/s390-32/multiarch/memcmp.c: New File.
* sysdeps/s390/s390-32/memcmp.S (__memcmp_g5):
Rename to __memcmp_default.
* sysdeps/s390/s390-32/multiarch/memcpy.S: Move to ...
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: ... here.
(memcpy): Use __memcpy_default as alias source.
* sysdeps/s390/s390-32/multiarch/memcpy.c: New File.
* sysdeps/s390/s390-32/memcpy.S (__memcpy_g5):
Rename to __memcpy_default.
* sysdeps/s390/s390-32/multiarch/memset.S: Move to ...
* sysdeps/s390/s390-32/multiarch/memset-s390.S: ... here.
(memset): Use __memset_default as alias source.
* sysdeps/s390/s390-32/multiarch/memset.c: New File.
* sysdeps/s390/s390-32/memset.S (__memset_g5):
Rename to __memset_default.
* sysdeps/s390/s390-64/multiarch/Makefile (sysdep_routines):
Remove ifunc-resolve, add memset-s390x, memcpy-s390x, memcmp-s390x.
* sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Delete File.
* sysdeps/s390/s390-64/multiarch/memcmp.S: Move to ...
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: ... here.
(memcmp, bcmp): Use __memcmp_default as alias source.
* sysdeps/s390/s390-64/multiarch/memcmp.c: New File.
* sysdeps/s390/s390-64/memcmp.S (__memcmp_z900):
Rename to __memcmp_default.
* sysdeps/s390/s390-64/multiarch/memcpy.S: Move to ...
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: ... here.
(memcpy): Use __memcpy_default as alias source.
* sysdeps/s390/s390-64/multiarch/memcpy.c: New File.
* sysdeps/s390/s390-64/memcpy.S (__memcpy_z900):
Rename to __memcpy_default.
* sysdeps/s390/s390-64/multiarch/memset.S: Move to ...
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: ... here.
(memset): Use __memset_default as alias source.
* sysdeps/s390/s390-64/multiarch/memset.c: New File.
* sysdeps/s390/s390-64/memset.S (__memset_z900):
Rename to __memset_default.
* sysdeps/s390/multiarch/ifunc-resolve.h: New File.
* sysdeps/s390/multiarch/ifunc-impl-list.c: New File.
On s390, the DXC(data-exception-code)-byte in FPC(floating-point-control)-
register contains a code of the last occured exception.
If bits 6 and 7 of DXC-byte are zero, the bits 0-5 correspond to the
ieee-exception flag bits.
The current implementation always uses these bits as ieee-exception flag bits.
fetestexcept() reports any exception after the first usage of a
vector-instruction in a process, because it raises an "vector instruction
exception" with DXC-code 0xFE.
This patch fixes the handling of the DXC-byte. The DXC-Byte is only handled
if bits 6 and 7 are zero.
The #define _FPU_RESERVED is extended by the DXC-Byte.
Otherwise the tests math/test-fpucw-static and math/test-fpucw-ieee-static
fails, because DXC-Byte contains the vector instruction exception when reaching
main(). This exception was triggered by strrchr() call in __init_misc().
__init_misc() is called after __setfpucw () in __libc_init_first().
The field __ieee_instruction_pointer in struct fenv_t is renamed to __unused
because it is a relict from commit "Remove PTRACE_PEEKUSER"
(87b9b50f0d) and isn´t used anymore.
ChangeLog:
[BZ #18610]
* sysdeps/s390/fpu/bits/fenv.h (fenv_t): Rename
__ieee_instruction_pointer to __unused.
* sysdeps/s390/fpu/fesetenv.c (__fesetenv): Remove usage of
__ieee_instruction_pointer.
* sysdeps/s390/fpu/fclrexcpt.c (feclearexcept): Fix dxc-field handling.
* sysdeps/s390/fpu/fgetexcptflg.c (fegetexceptflag): Likewise.
* sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag): Likewise.
* sysdeps/s390/fpu/ftestexcept.c (fetestexcept): Likewise.
* sysdeps/s390/fpu/fpu_control.h (_FPU_RESERVED):
Mark dxc-field as reserved.
Regenerated ulps after recent changes.
Tested on s390/s390x.
All math-tests passes on s390 after this patch.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Include
<sysdeps/nptl/lowlevellock.h> and remove macros and
functions that are now defined there.
(SYS_futex): Remove.
(lll_compare_and_swap): Remove.
* sysdeps/s390/bits/atomic.h (atomic_exchange_acq): Define.
commit 050f7298e1 added an extern
declaration for __tls_get_addr that conflicts with the one in s390
dl-tls.h, based on whether __tls_get_addr is defined as a macro. The
rationale seems to be based on the assumption that __tls_get_addr is
exported for every architecture and hence an internal non-plt alias is
needed. This is not true for s390 though, since it exports
__tls_get_offset and not __tls_get_addr. This results in tst-audit9
being stuck in an infinite loop.
This patch fixes this by defining a __tls_get_addr macro to itself so
as to not use the conflicting declaration.
Concluding the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feupdateenv by making it a weak alias for
__feupdateenv and making the affected code call __feupdateenv.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). Also tested for ARM
(soft-float) that the math.h linknamespace tests now pass.
[BZ #17748]
* include/fenv.h (__feupdateenv): Use libm_hidden_proto.
* math/feupdateenv.c (__feupdateenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/arm/feupdateenv.c (feupdateenv): Rename to __feupdateenv
and define as weak alias of __feupdateenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feupdateenv): New inline
function.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/generic/math_private.h (default_libc_feupdateenv): Call
__feupdateenv instead of feupdateenv.
(default_libc_feupdateenv_test): Likewise.
(libc_feresetround_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetround by making it a weak alias of
__fesetround and making the affected code call __fesetround. An
existing __fesetround function in fenv_libc.h for powerpc is renamed
to __fesetround_inline.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetround failures disappear from the linknamespace
test results (feupdateenv remains to be addressed to complete fixing
bug 17748).
[BZ #17748]
* include/fenv.h (__fesetround): Declare. Use libm_hidden_proto.
* math/fesetround.c (fesetround): Rename to __fesetround and
define as weak alias of __fesetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/alpha/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/arm/fesetround.c (fesetround): Likewise.
* sysdeps/hppa/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/i386/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/ia64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/m68k/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/mips/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround): Rename to
__fesetround_inline.
* sysdeps/powerpc/fpu/fenv_private.h (libc_fesetround_ppc): Call
__fesetround_inline instead of __fesetround.
* sysdeps/powerpc/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak. Call __fesetround_inline instead of
__fesetround.
* sysdeps/powerpc/nofpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetround.c (fesetround):
Likewise.
* sysdeps/s390/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sh/sh4/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sparc/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/tile/math_private.h (__fesetround): New inline function.
* sysdeps/x86_64/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetround): Call
__fesetround instead of fesetround.
(default_libc_feholdexcept_setround): Likewise.
(libc_feholdsetround_ctx): Likewise.
(libc_feholdsetround_noex_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetenv by making it a weak alias of
__fesetenv and making the affected code (including various copies of
feupdateenv which also gets called from C90 functions) call
__fesetenv.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetenv failures disappear from the linknamespace
test results (fsetround and feupdateenv remain to be addressed to
complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__fesetenv): Use libm_hidden_proto.
* math/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/arm/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fesetenv.c (__fesetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fesetenv.c (__fesetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetenv.c (__fesetenv):
Likewise.
* sysdeps/s390/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/sparc/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fesetenv): New inline function.
* sysdeps/x86_64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetenv): Use
__fesetenv instead of fesetenv.
(libc_feresetround_noex_ctx): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feholdexcept by making it a weak alias of
__feholdexcept and making the affected code call __feholdexcept.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that feholdexcept failures disappear from the
linknamespace test failures (fesetenv, fsetround and feupdateenv
remain to be addressed to complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__feholdexcept): Declare. Use
libm_hidden_proto.
* math/feholdexcpt.c (feholdexcept): Rename to __feholdexcept and
define as weak alias of __feholdexcept. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/alpha/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/arm/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/hppa/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/ia64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/m68k/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/mips/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/nofpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feholdexcpt.c
(feholdexcept): Likewise.
* sysdeps/s390/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sh/sh4/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sparc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/x86_64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/generic/math_private.h (default_libc_feholdexcept): Use
__feholdexcept instead of feholdexcept.
(default_libc_feholdexcept_setround): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fegetround by making it a weak alias of
__fegetround and making the affected code call __fegetround.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetround failures disappear from the linknamespace
test failures (feholdexcept, fesetenv, fesetround and feupdateenv
remain to be addressed before bug 17748 is fully fixed, although this
patch may suffice to fix the failures in some cases, when the libc_fe*
functions are implemented but there is no architecture-specific sqrt
implementation in use so there were failures from fegetround used by
sqrt but no other such failures).
[BZ #17748]
* include/fenv.h (__fegetround): Declare. Use libm_hidden_proto.
* math/fegetround.c (fegetround): Rename to __fegetround and
define as weak alias of __fegetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/alpha/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/arm/fegetround.c (fegetround): Likewise.
* sysdeps/hppa/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/i386/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/ia64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/m68k/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/mips/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/powerpc/fpu/fegetround.c (fegetround): Likewise.
Undefine after rather than before function definition; use
parentheses around function name in definition.
(__fegetround): Also undefine macro after function definition.
* sysdeps/powerpc/nofpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak. Do not undefine as macro.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetround.c (fegetround):
Likewise.
* sysdeps/s390/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/sparc/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/tile/math_private.h (__fegetround): New inline function.
* sysdeps/x86_64/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/ieee754/dbl-64/e_sqrt.c (__ieee754_sqrt): Use
__fegetround instead of fegetround.
Some C90 libm functions call fegetenv via libc_feholdsetround*
functions in math_private.h. This patch makes them call __fegetenv
instead, making fegetenv into a weak alias for __fegetenv as needed.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetenv failures disappear from the linknamespace
test failures (however, similar fixes will also be needed for
fegetround, feholdexcept, fesetenv, fesetround and feupdateenv before
this set of namespace issues covered by bug 17748 is fully fixed and
those linknamespace tests start passing).
[BZ #17748]
* include/fenv.h (__fegetenv): Use libm_hidden_proto.
* math/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/arm/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/i386/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fegetenv.c (__fegetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fegetenv.c (__fegetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetenv.c (__fegetenv):
Likewise.
* sysdeps/s390/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/sparc/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fegetenv): New inline function.
* sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (libc_feholdsetround_ctx): Use
__fegetenv instead of fegetenv.
(libc_feholdsetround_noex_ctx): Likewise.
Various C90 and UNIX98 libm functions call feraiseexcept, which is not
in those standards. This causes linknamespace test failures - except
on x86 / x86_64, where feraiseexcept is inline (for the relevant
constant arguments) in bits/fenv.h.
This patch fixes this by making those functions call __feraiseexcept
instead. All changes are applied to all architectures rather than
considering the possibility that some might not be needed in some
cases (e.g. x86) as it seems most maintainable to keep architectures
consistent.
Where __feraiseexcept does not exist, it is added, with feraiseexcept
made a weak alias; where it is a strong alias, it is made weak.
libm_hidden_def / libm_hidden_proto are used with __feraiseexcept
(this might in some cases improve code generation for existing calls
to __feraiseexcept in some code on some architectures). Where there
are dummy feraiseexcept macros (on architectures without
floating-point exceptions support, to avoid compile errors from
references to undefined FE_* macros), corresponding dummy
__feraiseexcept macros are added. And on x86, to ensure
__feraiseexcept calls still get inlined, the inline function in
bits/fenv.h is refactored so that most of it can be reused in an
inline __feraiseexcept in a separate include/bits/fenv.h.
Calls are changed in C90/UNIX98 functions, but generally not in
functions missing from those standards. They are also changed in
libc_fe* functions (on the basis that those might be used in any libm
function), and in feupdateenv (on the same basis - may be used, via
default libc_*, in any libm function - of course feupdateenv will need
changing to __feupdateenv in a subsequent patch to make that fully
namespace-clean).
No __feraiseexcept is added corresponding to the feraiseexcept in
powerpc bits/fenvinline.h, because that macro definition is
conditional on !defined __NO_MATH_INLINES, and glibc libm is built
with -D__NO_MATH_INLINES, so changing internal calls to use
__feraiseexcept should make no difference.
Tested for x86_64 (testsuite; the only change in disassembly of
installed shared libraries is a slight code reordering in clog10, of
no apparent significance). Also tested for MIPS, where (in the
configuration tested) it eliminates math.h linknamespace failures for
n32 and n64 (some for o32 remain because of other issues).
[BZ #17723]
* include/fenv.h (__feraiseexcept): Use libm_hidden_proto.
* math/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/arm/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/hppa/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/i386/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/ia64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/m68k/coldfire/fpu/fraiseexcpt.c (feraiseexcept):
Likewise.
* sysdeps/microblaze/math_private.h (__feraiseexcept): New macro.
* sysdeps/mips/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fraiseexcpt.c
(__feraiseexcept): Likewise.
* sysdeps/s390/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/sparc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feraiseexcept): New macro.
* sysdeps/unix/sysv/linux/alpha/fraiseexcpt.S (__feraiseexcept):
Use libm_hidden_def.
* sysdeps/x86_64/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
(feraiseexcept): Define as weak not strong alias. Use
libm_hidden_weak.
* sysdeps/x86/fpu/bits/fenv.h (__feraiseexcept_invalid_divbyzero):
New inline function. Factored out of ...
(feraiseexcept): ... here. Use __feraiseexcept_invalid_divbyzero.
* sysdeps/x86/fpu/include/bits/fenv.h: New file.
* math/e_scalb.c (invalid_fn): Call __feraiseexcept instead of
feraiseexcept.
* math/w_acos.c (__acos): Likewise.
* math/w_asin.c (__asin): Likewise.
* math/w_ilogb.c (__ilogb): Likewise.
* math/w_j0.c (y0): Likewise.
* math/w_j1.c (y1): Likewise.
* math/w_jn.c (yn): Likewise.
* math/w_log.c (__log): Likewise.
* math/w_log10.c (__log10): Likewise.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/aarch64/fpu/math_private.h
(libc_feupdateenv_test_aarch64): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/arm/fenv_private.h (libc_feupdateenv_test_vfp): Likewise.
* sysdeps/arm/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
The s390 ABI requires the stack pointer to be aligned at 8-bytes.
When a program is invoked as an argument to the dynamic linker,
_dl_start_user adjusts the stack to remove the dynamic linker
arguments so that the program sees only its name and arguments. This
may result in the stack being misaligned since each argument shift is
only a word and not a double-word.
This is now fixed shifting argv and envp down instead of shifting argc
up and reclaiming the stack. This requires _dl_argv to be adjusted
and hence, is no longer relro.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
This patch fixes the remaining ONE_DIRECTION warnings for s390 specific conversions.
It defines ONE_DIRECTION to 0 like the patch from Steve Ellcey:
https://www.sourceware.org/ml/libc-alpha/2014-05/msg00039.html
Changelog:
* sysdeps/s390/s390-64/utf16-utf32-z9.c
(ONE_DIRECTION): Define.
* sysdeps/s390/s390-64/utf8-utf16-z9.c
(ONE_DIRECTION): Define.
* sysdeps/s390/s390-64/utf8-utf32-z9.c
(ONE_DIRECTION): Define.
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
This patch makes non-ex-ports architectures set base_machine and
machine based on the original configured machine value in preconfigure
fragments, like ex-ports architectures, rather than in the toplevel
configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by the patch.
* configure.ac (base_machine): Do not set specially for particular
machines here.
* configure: Regenerated.
* sysdeps/powerpc/preconfigure: Move machine and base_machine
settings from configure.ac.
* sysdeps/i386/preconfigure: New file.
* sysdeps/s390/preconfigure: Likewise.
* sysdeps/sh/preconfigure: Likewise.
* sysdeps/sparc/preconfigure: Likewise.
The glibc makefiles have a standard variable, $(rtld-prefix), to run
the dynamic linker with a default --library-path option; this is used
as the basis of lots of other variables for running programs compiled
with the newly built library.
A few places however use $(elf-objpfx)ld.so or
$(elf-objpfx)${rtld-installed-name} directly, with such a
--library-path option. This patch makes such places use
$(rtld-prefix) instead. I'm not aware of any significance in these
cases to the choice of ld.so or ${rtld-installed-name} when running
the dynamic linker, or to whether $(patsubst
%,:%,$(sysdep-library-path)) is included in the library-path as it is
in $(rtld-prefix) and just one of the places being changed.
Tested x86_64.
* elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix).
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(rtld-prefix).
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
Added support for TX lock elision of pthread mutexes on s390 and
s390x. This may improve lock scaling of existing programs on TX
capable systems. The lock elision code is only built with
--enable-lock-elision=yes and then requires a GCC version supporting
the TX builtins. With lock elision default mutexes are elided via
__builtin_tbegin, if the cpu supports transactions. By default lock
elision is not enabled and the elision code is not built.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
See commit 41b1792698 for testcase.
Note: while this works on s390x, the s390 code hangs when using -e.
But it hangs regardless of this code (the hang seems to occur before
the exit func is even called). I didn't look too closely at it as
it seems to be an issue external to this file, so this code shouldn't
make the situation any worse.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
The s390 and s390x sysdep.h files include the more generic sysdep.h.
The more generic sysdep.h defines PSEUDO. This causes an annoying
CPP warning saying the PSEUDO was redefined. This patch removes the
warning by undefining PSEUDO before the redefinition. This is in line
with what all the other machines do.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
* sysdeps/s390/s390-32/sysdep.h: Undefine PSEUDO before redefinition.
* sysdeps/s390/s390-64/sysdep.h: Likewise.
Add support for STT_GNU_IFUNC symbols and the new R_390_IRELATIVE
relocation. Provide optimized version of memcpy, memset, and memcmp
for z10 and z196.
[BZ#13926]
Currently __bswap_64 is not defined at all for non-GCC compilers.
Define it but guard it with __GLIBC_HAVE_LONG_LONG.
endian.h uses __bswap_64, make the functions only available
if __GLIBC_HAVE_LONG_LONG is defined.
* sysdeps/s390/s390-64/elf/bsd-_setjmp.S: Moved to ...
* sysdeps/s390/s390-64/bsd-_setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/bsd-setjmp.S: Moved to ...
* sysdeps/s390/s390-64/bsd-setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/setjmp.S: Moved to ...
* sysdeps/s390/s390-64/setjmp.S: ... here.
* sysdeps/s390/s390-64/elf/configure.in: Moved to ...
* sysdeps/s390/s390-64/configure.in: ... here
* sysdeps/s390/s390-64/elf/configure: Delete file.
* sysdeps/s390/s390-64/elf/start.S: Moved to ...
* sysdeps/s390/s390-64/start.S: ... here.
* sysdeps/s390/s390-64/elf/configure: Delete.
* sysdeps/s390/s390-32/elf/bsd-_setjmp.S: Moved to ...
* sysdeps/s390/s390-32/bsd-_setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/bsd-setjmp.S: Moved to ...
* sysdeps/s390/s390-32/bsd-setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/setjmp.S: Moved to ...
* sysdeps/s390/s390-32/setjmp.S: ... here.
* sysdeps/s390/s390-32/elf/configure.in: Moved to ...
* sysdeps/s390/s390-32/configure.in: ... here.
* sysdeps/s390/s390-32/elf/configure: Delete file.
* sysdeps/s390/s390-32/elf/start.S: Moved to ...
* sysdeps/s390/s390-32/start.S: ... here.
correct instruction to remove the stack frame.
2008-11-03 Martin Schwidefsky <schwidefsky@de.ibm.com>
* sysdeps/s390/s390-64/dl-trampoline.S (_dl_runtime_profile): Use the
correct instruction to remove the stack frame.
ptrace call to get the ieee_instruction_pointer from the kernel.
* sysdeps/s390/fpu/fesetenv.c (fesetenv): Remove PTRACE_POKEUSER
ptrace call to set the ieee_instructtion_pointer.
* sysdeps/unix/sysv/linux/s390/sys/user.h (struct _user_regs_struct):
Add comment that ieee_instruction_pointer is always 0.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
__strtol_ull_max_tab, __strtol_ull_rem_tab): Declare.
(DEF): Don't put the var into .gnu.linkonce.r.* section.
Only provide var definitions in strtol_l (or for *ull*
in strtoll_l).
* stdio-common/bug16.c (tests): New array.
(do_tests): Allow the first hexadecimal digit
to be 1, 2, 4 or 8. Do 3 additional tests.
* sysdeps/s390/fpu/libm-test-ulps: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c (fchownat): Use
fchownat syscall if available.
* sysdeps/unix/sysv/linux/powerpc/fchownat.c (fchownat): Likewise.
* sysdeps/unix/sysv/linux/sh/fchownat.c (fchownat): Likewise.
* sysdeps/unix/sysv/linux/i386/fchownat.c (fchownat): Likewise.
(rec_dirsearch) [case HIGHER_NAME]: Correctly size ndomain array.
by a GOT relocation to make Scrt1.o position independent.
* sysdeps/s390/s390-64/elf/start.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscall.S: Add support for
six system call parameters.
* sysdeps/unix/sysv/linux/s390/s390-64/syscall.S: Likewise.
* math/multc3.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile
[$(subdir) = math] (libm-routines): Add multc3, divtc3.
* sysdeps/unix/sysv/linux/sparc/sparc32/fpu/Implies: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include math.h and
math_ldbl_opt.h.
(fabsl): Use long_double_symbol instead of weak_alias.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: Include math.h and
math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (fabsl): Add compat_symbol.
2006-01-31 Martin Schwidefsky <schwidefsky@de.ibm.com>
Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/s390/Implies: New file.
* sysdeps/unix/sysv/linux/s390/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/s390/nldbl-abi.h: New file.
* sysdeps/s390/fpu/bits/mathinline.h (signbitl, sqrtl): New inlines.
* sysdeps/s390/bits/mathdef.h: New file.
* sysdeps/s390/fpu/e_sqrtl.c: New file.
* sysdeps/s390/s390-32/bits/wordsize.h (__LONG_DOUBLE_MATH_OPTIONAL,
__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
* sysdeps/s390/Implies: Add ieee754/ldbl-128.
* sysdeps/s390/ldbl2mpn.c: File removed.
* sysdeps/s390/fpu/libm-test-ulps: Updated.
2006-01-31 Roland McGrath <roland@redhat.com>
* sysdeps/alpha/fpu/bits/mathdef.h: Moved to ...
* sysdeps/alpha/bits/mathdef.h: ... here.
* sysdeps/i386/fpu/bits/mathdef.h: Moved to ...
* sysdeps/i386/bits/mathdef.h: ... here.
* sysdeps/mips/fpu/bits/mathdef.h: Moved to ...
* sysdeps/mips/bits/mathdef.h: ... here.
* sysdeps/m68k/fpu/bits/mathdef.h: Moved to ...
* sysdeps/m68k/bits/mathdef.h: ... here.
* sysdeps/powerpc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/powerpc/bits/mathdef.h: ... here.
* sysdeps/sparc/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sparc/bits/mathdef.h: ... here.
* sysdeps/ia64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/ia64/bits/mathdef.h: ... here.
* sysdeps/sh/sh4/fpu/bits/mathdef.h: Moved to ...
* sysdeps/sh/sh4/bits/mathdef.h: ... here.
* sysdeps/x86_64/fpu/bits/mathdef.h: Moved to ...
* sysdeps/x86_64/bits/mathdef.h: ... here.
2006-01-31 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/mips/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/powerpc/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/s390/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sh/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc32/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc64/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/x86_64/jmpbuf-unwind.h: New file, moved from nptl/.
protection and allow pthread.h to include bits/setjmp.h as well as
setjmp.h.
* sysdeps/m68k/bits/setjmp.h: Likewise.
* sysdeps/s390/bits/setjmp.h: Make sure only setjmp.h or pthread.h
are allow to include bits/setjmp.h.
* sysdeps/mips/bits/setjmp.h (_JMPBUF_UNWINDS): Cast rhs to match lhs
cast of address.
* sysdeps/sh/bits/setjmp.h: Likewise.
2005-11-12 Jim Meyering <jim@meyering.net>
* sysdeps/unix/opendir.c (__alloc_dir): Declare STATP parameter
to be pointer to const.
* include/dirent.h: Update decl.
2004-03-11 Jakub Jelinek <jakub@redhat.com>
* sysdeps/s390/dl-tls.h: Only add __tls_get_offset assembly if
IS_IN_rtld.
(__TLS_GET_ADDR): Use __tls_get_offset, not __tls_get_addr.
2003-07-31 Jakub Jelinek <jakub@redhat.com>
* dlfcn/dlerror.c (once): New.
(dlerror): Call __libc_once.
(_dlerror_run): Remove once.
2003-07-31 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h (struct sigcontext):
Sync with 2.5.7 and 2.5.73 kernel changes.
2003-07-31 Jakub Jelinek <jakub@redhat.com>
* dlfcn/eval.c (funcall): Add noinline attribute to shut up warnings.
* elf/rtld.c (dl_main): Cast ElfW(Addr) arguments with %Zx/%Zd
formats to size_t.
* elf/dl-lookup.c (_dl_debug_bindings): Likewise.
* elf/tst-tls6.c (do_test): Use %zd format for l_tls_modid.
* elf/tst-tls8.c (do_test): Use %zd format for modid1 and modid2.
* gmon/tst-sprofil.c (main): Add parens to shut up warning.
* iconv/tst-iconv3.c (main): Use %td instead of %zd for pointer
difference argument.
* stdio-common/tst-wc-printf.c (main): Cast arguments with %C
format to wint_t.
* stdlib/tst-limits.c (main): For WORD_BIT and LONG_BIT, use
%d format and cast expected value to int.
* sysdeps/generic/libc-start.c (STATIC): Add
__attribute__((always_inline) if LIBC_START_MAIN is already defined.
* sysdeps/powerpc/fpu/w_sqrt.c (a_nan, a_inf): Change from uint32_t
to ieee_float_shape_type.
(__sqrt): Avoid type punning.
* sysdeps/powerpc/fpu/w_sqrtf.c (a_nan, a_inf): Change from uint32_t
to ieee_float_shape_type.
(__sqrtf): Avoid type punning.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Don't define
refsym if in dl-conflict.c.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/unix/sysv/linux/i386/semctl.c (union semun): Add __old_buf.
(__new_semctl): Shut up warning.
* sysdeps/unix/sysv/linux/semctl.c (union semun): Add __old_buf.
(__new_semctl): Shut up warning.
* sysdeps/unix/sysv/linux/shmctl.c (__new_shmctl): Wrap long lines.
Change old into union of __old_shmid_ds and __old_shminfo structs.
Adjust all users.
* wcsmbs/wcsmbs-tst1.c (main): Cast arguments with %C format to wint_t.
2003-07-31 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/utimes.c (__utimes): Fix actime and
modtime computation.
* sysdeps/unix/sysv/linux/futimes.c (__futimes): Likewise.
* sysdeps/posix/utimes.c (__utimes): Likewise.
2003-07-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/s390/s390-32/elf/start.S: Emit position independent code
if PIC.
* sysdeps/s390/s390-64/elf/start.S: Likewise.
2003-07-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc64/elf/start.S: Put L(start_address)
into .data.rel.ro.local section if PIC to avoid DT_TEXTREL.
atomic_compare_and_exchange_val_acq, atomic_add_zero,
atomic_compare_and_exchange_bool_acq and atomic_add_negative tests.
* include/atomic.h (atomic_add_negative, atomic_add_zero):
Prefix local variable so that it doesn't clash with the one
in atomic_exchange_and_add.
* sysdeps/ia64/bits/atomic.h (atomic_exchange): Fix for long/void *
pointers.
(atomic_exchange_and_add): Implement using __sync_fetch_and_add_?i.
* sysdeps/powerpc/bits/atomic.h (atomic_exchange_and_add): Force
value into register.
* sysdeps/s390/bits/atomic.h (__arch_compare_and_exchange_val_64_acq):
Cast newval to long.
* sysdeps/x86_64/bits/atomic.h
(__arch_compare_and_exchange_val_64_acq): Cast newval and oldval to
long.
(atomic_exchange): Cast newvalue to long if sizeof == 8.
(atomic_exchange_and_add): Cast value to long if sizeof == 8.
(atomic_add, atomic_add_negative, atomic_add_zero): Likewise.
(atomic_bit_set): Shift 1L up in all cases to shut up warnings.
bit from backtrace addresses.
2003-03-21 Andreas Schwab <schwab@suse.de>
* sysdeps/unix/sysv/linux/i386/chown.c: Don't define any versioned
__chown symbols.
Add comment.
(atomic_decrement_and_test): Add comment.
2003-03-22 Jakub Jelinek <jakub@redhat.com>
* include/atomic.h (atomic_compare_and_exchange_val_acq): Add comment.
Don't define if __arch_compare_and_exchange_val_32_acq is not defined.
(atomic_compare_and_exchange_bool_acq): Add comment. Don't use
__oldval variable in the macro, since it might be macro argument.
(atomic_decrement_if_positive): Initialize __memp, remove setting
of non-existent variable.
(atomic_bit_test_set): Cast 1 to __typeof (*mem) before shifting.
* sysdeps/ia64/bits/atomic.h (atomic_exchange_and_add): Implement
using atomic_compare_and_exchange_val_acq.
(atomic_decrement_if_positive, atomic_bit_test_set): Define.
* sysdeps/s390/bits/atomic.h (__arch_compare_and_exchange_val_8_acq):
Renamed from...
(__arch_compare_and_exchange_bool_8_acq): ... this.
(__arch_compare_and_exchange_val_16_acq): Renamed from...
(__arch_compare_and_exchange_bool_16_acq): ... this.
(__arch_compare_and_exchange_val_32_acq): Return old value. Renamed
from...
(__arch_compare_and_exchange_bool_32_acq): ... this.
(__arch_compare_and_exchange_val_64_acq): Return old value. Renamed
from...
(__arch_compare_and_exchange_bool_64_acq): ... this.
(__arch_compare_and_exchange_val_32_acq): Use __typeof for local
variables types instead of assuming int.
Change prefix of local variables to __arch.
* sysdeps/generic/bits/atomic.h (arch_compare_and_exchange_acq):
Remove.
(atomic_compare_and_exchange_val_acq,
atomic_compare_and_exchange_bool_acq): Define.
* csu/tst-atomic.c: New test.
* csu/tst-atomic-long.c: New test.
* csu/Makefile (tests): Add tst-atomic and tst-atomic-long.
* malloc/memusagestat.c (main): Kill warning if uint64_t is ulong.
* sysdeps/s390/Versions: Add trailing newline.
* sysdeps/unix/sysv/linux/sysconf.c (__sysconf): Kill warning
if INTERNAL_SYSCALL_ERROR_P doesn't use its first argument.
2003-01-06 Philip Blundell <philb@gnu.org>
* sysdeps/unix/arm/sysdep.S (syscall_error): Optimise a little.
[__LIBC_REENTRANT]: Unify PIC and non-PIC cases.
* sysdeps/unix/sysv/linux/arm/sysdep.h (PSEUDO): Remove .type
directive.
(PSEUDO_RET): Use SYSCALL_ERROR in place of __syscall_error.
(SYSCALL_ERROR): New.
(SYSCALL_ERROR_HANDLER) [NOT_IN_libc]: Provide local copy of error
handling code.
(INTERNAL_SYSCALL): Define.
(INLINE_SYSCALL): Use it.
(INTERNAL_SYSCALL_ERROR_P, INTERNAL_SYSCALL_ERRNO): Define.
* sysdeps/unix/sysv/linux/arm/socket.S (__socket): Use
SYSCALL_ERROR in place of __syscall_error.
2003-01-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ia64/bits/byteswap.h [__GNUC__ >= 2] (__bswap_16,
__bswap_32, __bswap_64): Put x into temporary variable
to avoid warnings.
[!__GNUC__] (__bswap_16, __bswap_32, __bswap_64): Change into static
(inline) functions.
* sysdeps/s390/bits/byteswap.h [__GNUC__ >= 2] (__bswap_16,
__bswap_32, __bswap_64): Put x into temporary variable
to avoid warnings.
[!__GNUC__] (__bswap_16, __bswap_32, __bswap_64): Change into static
(inline) functions.
* sysdeps/i386/bits/byteswap.h [!__GNUC__] (__bswap_16, __bswap_32):
Likewise.
2003-01-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/alpha/adjtime.c (ntp_adjtime): New weak
alias.
