The build of glibc for i686-gnu has been failing for a while with GCC
mainline / GCC 13:
../sysdeps/mach/hurd/getcwd.c: In function '__hurd_canonicalize_directory_name_internal':
../sysdeps/mach/hurd/getcwd.c:242:48: error: pointer 'file_name' may be used after 'realloc' [-Werror=use-after-free]
242 | file_namep = &buf[file_namep - file_name + size / 2];
| ~~~~~~~~~~~^~~~~~~~~~~
../sysdeps/mach/hurd/getcwd.c:236:25: note: call to 'realloc' here
236 | buf = realloc (file_name, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix by doing the subtraction before the reallocation.
Tested with build-many-glibcs.py for i686-gnu.
[samuel.thibault@ens-lyon.rg: Removed mention of this being a bug]
Message-Id: <18587337-7815-4056-ebd0-724df262d591@codesourcery.com>
As fixed in 0822e3552a ("hurd: Don't pass FD_CLOEXEC in CMSG_DATA"),
senders currently don't have any flag to pass. We shouldn't blindly take
random flags that senders could be erroneously giving us.
This is a new flag that can be passed to recvmsg () to make it
atomically set the CLOEXEC flag on all the file descriptors received
using the SCM_RIGHTS mechanism. This is useful for all the same reasons
that the other XXX_CLOEXEC flags are useful: namely, it provides
atomicity with respect to another thread of the same process calling
(fork and then) exec at the same time.
This flag is already supported on Linux and FreeBSD. The flag's value,
0x40000, is choosen to match FreeBSD's.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423160548.126576-2-bugaevc@gmail.com>
The flags are used by _hurd_intern_fd, which takes O_* flags, not FD_*.
Also, it is of no concern to the receiving process whether or not
the sender process wants to close its copy of sent file descriptor
upon exec, and it should not influence whether or not the received
file descriptor gets the FD_CLOEXEC flag set in the receiving process.
The latter should in fact be dependent on the MSG_CMSG_CLOEXEC flag
being passed to the recvmsg () call, which is going to be implemented
in the following commit.
Fixes 344e755248
"hurd: Support sending file descriptors over Unix sockets"
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
This makes the prefer_map_32bit_exec tunable no longer Linux-specific.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-4-bugaevc@gmail.com>
This is a flag that can be passed to mmap () to request that the mapping
being established should be located in the lower 2 GB area of the
address space, so only the lower 31 (not 32) bits can be set in its
address, and the address can be represented as a 32-bit integer without
truncating it.
This flag is intended to be compatible with Linux, FreeBSD, and Darwin
flags of the same name. Out of those systems, it appears Linux and
FreeBSD take MAP_32BIT to mean "map 31 bit", whereas Darwin allows the
32nd bit to be set in the address as well. The Hurd follows Linux and
FreeBSD behavior.
Unlike on those systems, on the Hurd MAP_32BIT is defined on all
supported architectures (which currently are only i386 and x86_64).
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-1-bugaevc@gmail.com>
When opening a temporary file without O_CLOEXEC we risk leaking the
file descriptor if another thread calls (fork and then) exec while we
have the fd open. Fix this by consistently passing O_CLOEXEC everywhere
where we open a file for internal use (and not to return it to the user,
in which case the API defines whether or not the close-on-exec flag
shall be set on the returned fd).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230419160207.65988-4-bugaevc@gmail.com>
Properly differentiate between setting up the real TLS with
TLS_INIT_TP, and setting up the early TLS (__init1_tcbhead) in static
builds. In the latter case, don't yet migrate the reply port into the
TCB, and don't yet set __libc_tls_initialized to 1.
This also lets us move the __init1_desc assignment inside
_hurd_tls_init ().
Fixes cd019ddd89
"hurd: Don't leak __hurd_reply_port0"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Created tunable glibc.pthread.stack_hugetlb to control when hugepages
can be used for stack allocation.
In case THP are enabled and glibc.pthread.stack_hugetlb is set to
0, glibc will madvise the kernel not to use allow hugepages for stack
allocations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We must not use the user's reply port (scp->sc_reply_port) for any of
our own RPCs, otherwise various things break. So, use MACH_PORT_DEAD as
a reply port when destroying our reply port, and make sure to do this
after _hurd_sigstate_unlock (), which may do a gsync_wake () RPC.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Optimize the fast paths (x < y) and (x/y < 2^12). Delay handling of special
cases to reduce the number of instructions executed before the fast paths.
Performance improvements for fmod:
Skylake Zen2 Neoverse V1
subnormals 11.8% 4.2% 11.5%
normal 3.9% 0.01% -0.5%
close-exponents 6.3% 5.6% 19.4%
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When glibc is built as a shared library, TLS is always initialized by
the call of TLS_INIT_TP () macro made inside the dynamic loader, prior
to running the main program (see dl-call_tls_init_tp.h). We can take
advantage of this: we know for sure that __LIBC_NO_TLS () will evaluate
to 0 in all other cases, so let the compiler know that explicitly too.
Also, only define _hurd_tls_init () and TLS_INIT_TP () under the same
conditions (either !SHARED or inside rtld), to statically assert that
this is the case.
Other than a microoptimization, this also helps with avoiding awkward
sharing of the __libc_tls_initialized variable between ld.so and libc.so
that we would have to do otherwise -- we know for sure that no sharing
is required, simply because __libc_tls_initialized would always be set
to true inside libc.so.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-25-bugaevc@gmail.com>
Now that the signal code no longer accesses it, the only real user of it
was mig-reply.c, so move the logic for managing the port there.
If we're in SHARED and outside of rtld, we know that __LIBC_NO_TLS ()
always evaluates to 0, and a TLS reply port will always be used, not
__hurd_reply_port0. Still, the compiler does not see that
__hurd_reply_port0 is never used due to its address being taken. To deal
with this, explicitly compile out __hurd_reply_port0 when we know we
won't use it.
Also, instead of accessing the port via THREAD_SELF->reply_port, this
uses THREAD_GETMEM and THREAD_SETMEM directly, avoiding possible
miscompilations.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
This reverts commit b37899d34d.
Apparently we load libc.so (and thus start using its functions) before
calling TLS_INIT_TP, so libc.so functions should not actually assume
that TLS is always set up.
Previously, once we set up TLS, we would implicitly switch from using
__hurd_reply_port0 to reply_port inside the TCB, leaving the former
unused. But we never deallocated it, so it got leaked.
Instead, migrate the port into the new TCB's reply_port slot. This
avoids both the port leak and an extra syscall to create a new reply
port for the TCB.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-28-bugaevc@gmail.com>
If we're doing signals, that means we've already got the signal thread
running, and that implies TLS having been set up. So we know that
__hurd_local_reply_port will resolve to THREAD_SELF->reply_port, and can
access that directly using the THREAD_GETMEM and THREAD_SETMEM macros.
This avoids potential miscompilations, and should also be a tiny bit
faster.
Also, use mach_port_mod_refs () and not mach_port_destroy () to destroy
the receive right. mach_port_destroy () should *never* be used on
mach_task_self (); this can easily lead to port use-after-free
vulnerabilities if the task has any other references to the same port.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-26-bugaevc@gmail.com>
When glibc is built as a shared library, TLS is always initialized by
the call of TLS_INIT_TP () macro made inside the dynamic loader, prior
to running the main program (see dl-call_tls_init_tp.h). We can take
advantage of this: we know for sure that __LIBC_NO_TLS () will evaluate
to 0 in all other cases, so let the compiler know that explicitly too.
Also, only define _hurd_tls_init () and TLS_INIT_TP () under the same
conditions (either !SHARED or inside rtld), to statically assert that
this is the case.
Other than a microoptimization, this also helps with avoiding awkward
sharing of the __libc_tls_initialized variable between ld.so and libc.so
that we would have to do otherwise -- we know for sure that no sharing
is required, simply because __libc_tls_initialized would always be set
to true inside libc.so.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-25-bugaevc@gmail.com>
These are just regular local variables that are not accessed in any
funny ways, not even though a pointer. There's absolutely no reason to
declare them volatile. It only ends up hurting the quality of the
generated machine code.
If anything, it would make sense to decalre sigsp as *pointing* to
volatile memory (volatile void *sigsp), but evidently that's not needed
either.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230403115621.258636-2-bugaevc@gmail.com>
This is based on the Linux port's version, but laid out to match Mach's
struct i386_thread_state, much like the i386 version does.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Rename x86_cpu_INDEX_7_ECX_1 to x86_cpu_INDEX_7_ECX_15 for the unused bit
15 in ECX from CPUID with EAX == 0x7 and ECX == 0.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
sysdeps/mach/hurd/htl/pt-pthread_self.c: New file.
htl/Makefile: .. Add it to libc routine.
sysdeps/mach/hurd/htl/pt-sysdep.c(__pthread_self): Remove it.
sysdeps/mach/hurd/htl/pt-sysdep.h(__pthread_self): Add hidden propertie.
htl/Versions(__pthread_self) Version it as private symbol.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-3-gfleury@disroot.org>
As indicated by sparc kernel-features.h, even though sparc64 defines
__NR_pause, it is not supported (ENOSYS). Always use ppoll or the
64 bit time_t variant instead.
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 8 (which is sizeof of uint32_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 8;
ex -= 8;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 17.2549 | 12.0318
x86_64 (Ryzen 9) | normal | 85.4096 | 49.9641
x86_64 (Ryzen 9) | close-exponents | 19.1072 | 15.8224
aarch64 (N1) | subnormal | 10.2182 | 6.81778
aarch64 (N1) | normal | 60.0616 | 20.3667
aarch64 (N1) | close-exponents | 11.5256 | 8.39685
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 11.6662 | 10.8955
armhf (N1) | normal | 69.2759 | 34.1524
armhf (N1) | close-exponents | 13.6472 | 18.2131
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 11 (which is sizeo of uint64_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 11;
ex -= 11;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 19.1584 | 12.5049
x86_64 (Ryzen 9) | normal | 1016.51 | 296.939
x86_64 (Ryzen 9) | close-exponents | 18.4428 | 16.0244
aarch64 (N1) | subnormal | 11.153 | 6.81778
aarch64 (N1) | normal | 528.649 | 155.62
aarch64 (N1) | close-exponents | 11.4517 | 8.21306
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, clz, ctz, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 15.908 | 15.1083
armhf (N1) | normal | 837.525 | 244.833
armhf (N1) | close-exponents | 16.2111 | 21.8182
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Just like the other existing rtld-str* files, this provides rtld with
usable versions of stpncpy and strncpy.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-22-bugaevc@gmail.com>
The source code is the same as sysdeps/i386/htl/tcb-offsets.sym, but of
course the produced tcb-offsets.h will be different.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-21-bugaevc@gmail.com>
These do not need any changes to be used on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-20-bugaevc@gmail.com>
This is more correct, if only because these fields are defined as having
the type unsigned int in the Mach headers, so casting them to a signed
int and then back is suboptimal.
Also, remove an extra reassignment of uesp -- this is another remnant of
the ecx kludge.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-16-bugaevc@gmail.com>
There's nothing Mach- or Hurd-specific about it; any port that ends
up with rtld pulling in strncpy will need this.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-15-bugaevc@gmail.com>
This was used for the value of libc-lock's owner when TLS is not yet set
up, so THREAD_SELF can not be used. Since the value need not be anything
specific -- it just has to be non-NULL -- we can just use a plain
constant, such as (void *) 1, for this. This avoids accessing the symbol
through GOT, and exporting it from libc.so in the first place.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-12-bugaevc@gmail.com>
Noone is or should be using __hurd_threadvar_stack_{offset,mask}, we
have proper TLS now. These two remaining variables are never set to
anything other than zero, so any code that would try to use them as
described would just dereference a zero pointer and crash. So remove
them entirely.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-6-bugaevc@gmail.com>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Instead define the required fields in system dependend files. The only
system dependent definition is FILENAME_MAX, which should match POSIX
PATH_MAX, and it is obtained from either kernel UAPI or mach headers.
Currently set pre-defined value from current kernels.
It avoids a circular dependendy when including stdio.h in
gen-as-const-headers files.
Checked on x86_64-linux-gnu and i686-linux-gnu
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This allows other targets to use the same inputs for their own libmvec
microbenchmarks without having to duplicate them in their own
subdirectory.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Binutils 2.40 sets EF_LARCH_OBJABI_V1 for shared objects:
$ ld --version | head -n1
GNU ld (GNU Binutils) 2.40
$ echo 'int dummy;' > dummy.c
$ cc dummy.c -shared
$ readelf -h a.out | grep Flags
Flags: 0x43, DOUBLE-FLOAT, OBJ-v1
We need to ignore it in ldconfig or ldconfig will consider all shared
objects linked by Binutils 2.40 "unsupported". Maybe we should stop
setting EF_LARCH_OBJABI_V1 for shared objects, but Binutils 2.40 is
already released and we cannot change it.
Linux threads were removed about 12 years ago and the current
nptl implementation only requires 4-byte alignment for pthread
locks.
The 16-byte alignment causes various issues. For example in
building ignition-msgs, we have:
/usr/include/google/protobuf/map.h:124:37: error: static assertion failed
124 | static_assert(alignof(value_type) <= 8, "");
| ~~~~~~~~~~~~~~~~~~~~^~~~
This is caused by the 16-byte pthread lock alignment.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
For better debug experience use separate code block with extra
cfi_* directives to run child (same as in __clone3).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the clone3 wrapper on ARC. It doesn't care about stack alignment.
All callers should provide an aligned stack.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Between versions v2.11 and v2.12 struct ntptimeval got new fields.
That wasn't a problem because new function ntp_gettimex was created
(and made default) to support new struct. Old ntp_gettime was not
using new fields so it was safe to call with old struct
definition. Then commits 5613afe9e3 and b6ad64b907 (added for
64 bit time_t support), ntp_gettime start setting new fields.
Sets fields manually to maintain compatibility with v2.11 struct
definition.
Resolves#30156
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
according to man-pages-posix-2017, shm_open() function may fail if the length
of the name argument exceeds {_POSIX_PATH_MAX} and set ENAMETOOLONG
Signed-off-by: abushwang <abushwangs@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Recorded in [BZ #30183]:
1. export GLIBC_TUNABLES=glibc.cpu.hwcaps=-AVX512
2. Add _dl_printf("p -- %s\n", p); just before switch(nl) in
sysdeps/x86/cpu-tunables.c
3. compiled and run ./testrun.sh /usr/bin/ls
you will get:
p -- -AVX512
p -- LC_ADDRESS=en_US.UTF-8
p -- LC_NUMERIC=C
...
The function, TUNABLE_CALLBACK (set_hwcaps)
(tunable_val_t *valp), checks far more than it should and it
should stop at end of "-AVX512".
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.2. (There are no new
constants covered by these tests in 6.2 that need any other header
changes, and the removed MAP_VARIABLE for hppa was addressed
separately.)
Tested with build-many-glibcs.py.
The __builtin_arm_uqsub8 is an internal GCC builtin which might change
in future release (the correct way is to include "arm_acle.h" and use
__uqsub8 ()). Since not all compilers support it, just use the
inline assembler instead.
Checked on armv7a-linux-gnueabihf.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The generic implementation already cover word access along with
cmpbge for both aligned and unaligned, so use it instead.
Checked qemu static for alpha-linux-gnu.
The default, and power7 implementation just adds word aligned
access when inputs have the same aligment. The unaligned case
is still done by byte operations.
This is already covered by the generic implementation, which also add
the unaligned input optimization.
Checked on powerpc64-linux-gnu built without multi-arch for powerpc64,
power7, power8, and power9 (build for le).
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
The default, power4, and power7 implementation just adds word aligned
access when inputs have the same aligment. The unaligned case
is still done by byte operations.
This is already covered by the generic implementation, which also add
the unaligned input optimization.
Checked on powerpc-linux-gnu built without multi-arch for powerpc,
power4, and power7.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
