C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log10p1 functions (log10(1+x): like log1p, but for
base-10 logarithms).
This is directly analogous to the log2p1 implementation (except that
whereas log2p1 has a smaller underflow range than log1p, log10p1 has a
larger underflow range). The test inputs are copied from those for
log1p and log2p1, plus a few more inputs in that wider underflow
range.
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
POSIX.1-2024 (now official) specifies tm_gmtoff and tm_zone.
This is a good time to update the manual’s “Date and Time”
chapter so I went through it, fixed some outdated
stuff that had been in there for decades, and improved it to match
POSIX.1-2024 better and to clarify some implementation-defined
behavior. Glibc already conforms to POSIX.1-2024 in these matters, so
this is merely a documentation change.
* manual/examples/strftim.c: Use snprintf instead of now-deprecated
function asctime. Check for localtime failure. Simplify by using
puts instead of fputs. Prefer ‘buf, sizeof buf’ to less-obvious
‘buffer, SIZE’.
* manual/examples/timespec_subtract.c: Modernize to use struct
timespec not struct timeval, and rename from timeval_subtract.c.
All uses changed. Check for overflow. Do not check for negative
return value, which ought to be OK since negative time_t is OK.
Use GNU indenting style.
* manual/time.texi:
Document CLOCKS_PER_SEC, TIME_UTC, timespec_get, timespec_getres,
strftime_l.
Document the storage lifetime of tm_zone and of tzname.
Caution against use of tzname, timezone and daylight, saying that
these variables have unspecified values when TZ is geographic.
This is what glibc actually does (contrary to what the manual said
before this patch), and POSIX is planned to say the same thing
<https://austingroupbugs.net/view.php?id=1816>.
Also say that directly accessing the variables is not thread-safe.
Say that localtime_r and ctime_r don’t necessarily set time zone
state. Similarly, in the tzset documentation, say that it is called
by ctime, localtime, mktime, strftime, not that it is called by all
time conversion functions that depend on the time zone.
Say that tm_isdst is useful mostly just for mktime, and that
other uses should prefer tm_gmtoff and tm_zone instead.
Do not say that strftime ignores tm_gmtoff and tm_zone, because
it doesn’t do that.
Document what gmtime does to tm_gmtoff and tm_zone.
Say that the asctime, asctime_r, ctime, and ctime_r are now deprecated
and/or obsolescent, and that behavior is undefined if the year is <
1000 or > 9999. Document strftime before these now-obsolescent
functions, so that readers see the useful function first.
Coin the terms “geographical format” and “proleptic format” for the
two main formats of TZ settings, to simplify exposition. Use this
wording consistently.
Update top-level proleptic syntax to match POSIX.1-2024, which glibc
already implements. Document the angle-bracket quoted forms of time
zone abbreviations in proleptic TZ. Say that time zone abbreviations
can contain only ASCII alphanumerics, ‘+’, and ‘-’.
Document what happens if the proleptic form specifies a DST
abbreviation and offset but omits the rules. POSIX says this is
implementation-defined so we need to document it. Although this
documentation mentions ‘posixrules’ tersely, we need to rethink
‘posixrules’ since I think it stops working after 2038.
Clarify wording about TZ settings beginning with ‘;’.
Say that timegm is in ISO C (as of C23).
Say that POSIX.1-2024 removed gettimeofday.
Say that tm_gmtoff and tm_zone are extensions to ISO C, which is
clearer than saying they are invisible in a struct ISO C enviroment,
and gives us more wiggle room if we want to make them visible in
strict ISO C, something that ISO C allows.
Drop mention of old standards like POSIX.1c and POSIX.2-1992 in the
text when the history is so old that it’s no longer useful in a
general-purpose manual.
Define Coordinated Universal Time (UTC), time zone, time zone ruleset,
and POSIX Epoch, and use these phrases more consistently.
Improve TZ examples to show more variety, and to reflect current
practice and timestamps. Remove obsolete example about Argentina.
Add an example for Ireland.
Don’t rely on GCC extensions when explaining ctime_r.
Do not say that difftime produces the mathematically correct result,
since it might be inexact.
For clock_t don’t say “as in the example above” when there is no
such example, and don’t say that casting to double works “properly
and consistently no matter what”, as it suffers from rounding and
overflow.
Don’t say broken-down time is not useful for calculations; it’s
merely painful.
Say that UTC is not defined before 1960.
Rename Time Zone Functions to Time Zone State. All uses changed.
Update Internet RFC 822 → 5322, 1305 → 5905. Drop specific years of
ISO 8601 as they don’t matter.
Minor style changes: @code{"..."} → @t{"..."} to avoid overquoting in
info files, @code → @env for environment variables, Daylight Saving
Time → daylight saving time, white space → whitespace, prime meridian
→ Prime Meridian.
When we don't want to use non-temporal stores for memset, we set
`x86_memset_non_temporal_threshold` to SIZE_MAX.
The current code, however, we using `maximum_non_temporal_threshold`
as the upper bound which is `SIZE_MAX >> 4` so we ended up with a
value of `0`.
Fix is to just use `SIZE_MAX` as the upper bound for when setting the
tunable.
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux pinacolada 6.6.32-gentoo #1 SMP PREEMPT Sun Jun 9 14:18:17 CEST 2024 x86_64 Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz GenuineIntel GNU/Linux
32bit build for multilib environment
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
"ADDI sp, sp, 24" and "ADDI sp, sp, SZFCSREG" (SZFCSREG = 4) are
misaligning the stack: the ABI mandates a 16-byte alignment. Fix it
by changing the first one to "ADDI sp, sp, 32", and reuse the spare 4th
slot for saving fcsr.
Reported-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
This avoids changing _res.options, which inteferes with change
detection as part of automatic reloading of /etc/resolv.conf.
Reviewed-by: DJ Delorie <dj@redhat.com>
Properly set libc_cv_have_x86_isa_level in shell for MINIMUM_X86_ISA_LEVEL
defined as
(__X86_ISA_V1 + __X86_ISA_V2 + __X86_ISA_V3 + __X86_ISA_V4)
Also set __X86_ISA_V2 to 1 for i386 if __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8
is defined. There are no changes in config.h nor in config.make on x86-64.
On i386, -march=x86-64-v2 with GCC generates
#define MINIMUM_X86_ISA_LEVEL 2
in config.h and
have-x86-isa-level = 2
in config.make. This fixes BZ #31883.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sort tunables list at the time it's generated. Note: adding new
tunables will cause other tunable IDs to change, but that was
the case before anyway. POSIX does not guarantee the order of "foo
in bar" AWK operators, so the order was indeterminate before anyway.
Even depending on the order to be the same across multiple calls,
such as in this script, is undefined, so sorting the list resolves
that also.
Note that sorting is not dependent on the user's locale.
The __stack_prot is used by Linux to make the stack executable if
a modules requires it. It is also marked as RELRO, which requires
to change the segment permission to RW to update it.
Also, there is no need to keep track of the flags: either the stack
will have the default permission of the ABI or should be change to
PROT_READ | PROT_WRITE | PROT_EXEC. The only additional flag,
PROT_GROWSDOWN or PROT_GROWSUP, is Linux only and can be deducted
from _STACK_GROWS_DOWN/_STACK_GROWS_UP.
Also, the check_consistency function was already removed some time
ago.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
These comments were written in 2003 (added in 2c008571c3), predating
the addition of getdelim(3)/getline(3) in POSIX.1-2008.
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On i386, set the default minimum ISA level to 0, not 1 (baseline which
includes SSE2). There are no changes in config.h nor in config.make on
x86-64. This fixes BZ #31867.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Tested-by: Ian Jordan <immoloism@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
In commit 46b5e98ef6 ("x86: Add seperate non-temporal tunable for
memset") a tunable threshold for enabling non-temporal memset was added,
but only for Intel hardware.
Since that commit, new benchmark results suggest that non-temporal
memset is beneficial on AMD, as well, so allow this tunable to be set
for AMD.
See:
https://docs.google.com/spreadsheets/d/1opzukzvum4n6-RUVHTGddV6RjAEil4P2uMjjQGLbLcU/edit?usp=sharing
which has been updated to include data using different stategies for
large memset on AMD Zen2, Zen3, and Zen4.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The manpage says that when the passed size is zero, they should set the
expected size and return 0. ERANGE shall be returned only when the non-zero
passed size is not large enough.
When no translator is set, __file_get_translator would return EINVAL
which is a confusing value. Better check for a passive translation
before getting the value.
The error message in xgetsockname was incorrectly referring to a
different function. This commit fixes that.
Suggested-by: Arjun Shankar <arjun@redhat.com>
Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
These are required by the upcoming POSIX standard and are available on
other platforms.
Link: https://austingroupbugs.net/view.php?id=339
Signed-off-by: Mohamed Akram <mohd.akram@outlook.com>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
As of Linux kernel 6.9, some ioctls and a parameters structure have been
introduced which allow user programs to control whether a particular
epoll context will busy poll.
Update the headers to include these for the convenience of user apps.
The ioctls were added in Linux kernel 6.9 commit 18e2bf0edf4dd
("eventpoll: Add epoll ioctl for epoll_params") [1] to
include/uapi/linux/eventpoll.h.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/?h=v6.9&id=18e2bf0edf4dd
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
difftime can signal an inexact conversion when converting to double,
so it should not be marked as pure or nothrow (BZ 31808).
Although we could do something more complicated, in which difftime is
plain on modern platforms but const and nothrow on obsolescent
platforms with 32-bit time_t, it hardly seems worth the trouble.
difftime is used so rarely that it's not worth taking pains to
optimize calls to it on obsolescent platforms.
Reviewed-by: DJ Delorie <dj@redhat.com>
The test aims to ensure that malloc uses the alternate path to
allocate memory when sbrk() or brk() fails.To achieve this,
the test first creates an obstruction at current program break,
tests that obstruction with a failing sbrk(), then checks if malloc
is still returning a valid ptr thus inferring that malloc() used
mmap() instead of brk() or sbrk() to allocate the memory.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Reviewed-by: Zack Weinberg <zack@owlfolio.org>
Left shift of ki is undefined when ki<0, copy the logic from exp,
which uses unsigned arithmetics, to fix it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Deallocate the memory for the FILE structure when seeking to the end fails
in append mode.
Fixes: ea33158c96 ("Fix offset caching for streams and use it for ftell (BZ #16680)")
Linux 6.9 adds the ELF note type NT_ARM_FPMR. Add this to glibc's
elf.h, along with the previously missed NT_ARM_SSVE, NT_ARM_ZA and
NT_ARM_ZT (added in older kernel versions).
Tested for x86_64.
This has been confirmed to work around some interposed mallocs. Here
is a discussion of the impact test ust/libc-wrapper/test_libc-wrapper
in lttng-tools:
New TLS usage in libgcc_s.so.1, compatibility impact
<https://inbox.sourceware.org/libc-alpha/8734v1ieke.fsf@oldenburg.str.redhat.com/>
Reportedly, this patch also papers over a similar issue when tcmalloc
2.9.1 is not compiled with -ftls-model=initial-exec. Of course the
goal really should be to compile mallocs with the initial-exec TLS
model, but this commit appears to be a useful interim workaround.
Fixes commit d2123d6827 ("elf: Fix slow
tls access after dlopen [BZ #19924]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The tuning for non-temporal stores for memset vs memcpy is not always
the same. This includes both the exact value and whether non-temporal
stores are profitable at all for a given arch.
This patch add `x86_memset_non_temporal_threshold`. Currently we
disable non-temporal stores for non Intel vendors as the only
benchmarks showing its benefit have been on Intel hardware.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Previously we use `rep stosb` for all medium/large memsets. This is
notably worse than non-temporal stores for large (above a
few MBs) memsets.
See:
https://docs.google.com/spreadsheets/d/1opzukzvum4n6-RUVHTGddV6RjAEil4P2uMjjQGLbLcU/edit?usp=sharing
For data using different stategies for large memset on ICX and SKX.
Using non-temporal stores can be up to 3x faster on ICX and 2x faster
on SKX. Historically, these numbers would not have been so good
because of the zero-over-zero writeback optimization that `rep stosb`
is able to do. But, the zero-over-zero writeback optimization has been
removed as a potential side-channel attack, so there is no longer any
good reason to only rely on `rep stosb` for large memsets. On the flip
size, non-temporal writes can avoid data in their RFO requests saving
memory bandwidth.
All of the other changes to the file are to re-organize the
code-blocks to maintain "good" alignment given the new code added in
the `L(stosb_local)` case.
The results from running the GLIBC memset benchmarks on TGL-client for
N=20 runs:
Geometric Mean across the suite New / Old EXEX256: 0.979
Geometric Mean across the suite New / Old EXEX512: 0.979
Geometric Mean across the suite New / Old AVX2 : 0.986
Geometric Mean across the suite New / Old SSE2 : 0.979
Most of the cases are essentially unchanged, this is mostly to show
that adding the non-temporal case didn't add any regressions to the
other cases.
The results on the memset-large benchmark suite on TGL-client for N=20
runs:
Geometric Mean across the suite New / Old EXEX256: 0.926
Geometric Mean across the suite New / Old EXEX512: 0.925
Geometric Mean across the suite New / Old AVX2 : 0.928
Geometric Mean across the suite New / Old SSE2 : 0.924
So roughly a 7.5% speedup. This is lower than what we see on servers
(likely because clients typically have faster single-core bandwidth so
saving bandwidth on RFOs is less impactful), but still advantageous.
Full test-suite passes on x86_64 w/ and w/o multiarch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This new note type is defined at https://systemd.io/ELF_DLOPEN_METADATA/
and is used to list shared library dependencies loaded via dlopen().
Distro packagers can use this, via tools like those available at
https://github.com/systemd/package-notes to automatically generate
dependencies when building projects that make use of this
specification.
By defining the note id here we can use it in other projects as a
stable identifier, for example in 'readelf' to pretty-print its
content.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Page was renamed some time ago, there's a redirect but better
to point to the right one
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
A space is added before the left bracket of the x86_64 elf_machine_rela
function, in order to harmonize with the rest of the implementation of
the function and to make it easier to retrieve the function. The lines
where the function definition is located has been re-indented, as well
as its left curly bracket placed in the correct position.
Signed-off-by: Xin Wang <yw987194828@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Because difftime's behavior depends on the floating-point environment,
the function is pure, not const (BZ 31802).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
pidfd_getpid.c has
/* Ignore invalid large values. */
if (INT_MULTIPLY_WRAPV (10, n, &n)
|| INT_ADD_WRAPV (n, *l++ - '0', &n))
return -1;
For GCC older than GCC 7, INT_ADD_WRAPV(a, b, r) is defined as
_GL_INT_OP_WRAPV (a, b, r, +, _GL_INT_ADD_RANGE_OVERFLOW)
and *l++ - '0' is evaluated twice. Fix BZ #31798 by moving "l++" out of
the if statement. Tested with GCC 6.4 and GCC 14.1.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
