Now we require Linux 3.2 or later kernel headers everywhere, the
configure test for <linux/fanotify.h> is obsolete; this patch removes
it.
Tested for x86_64.
* sysdeps/unix/sysv/linux/configure.ac (linux/fanotify.h): Do not
test for header.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* config.h.in (HAVE_LINUX_FANOTIFY_H): Remove #undef.
* sysdeps/unix/sysv/linux/tst-fanotify.c [!HAVE_LINUX_FANOTIFY_H]:
Remove conditional code.
[HAVE_LINUX_FANOTIFY_H]: Make code unconditional.
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I
proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since
Linux 2.6.32 has reached EOL.
In the discussion in February, some concerns were expressed about
compatibility with OpenVZ containers. It's not clear that these are
real issues, given OpenVZ backporting kernel features and faking the
kernel version for guest software, as discussed in
<https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's
also not clear that supporting running GNU/Linux distributions from
late 2016 (at the earliest) on a kernel series from 2009 is a sensible
expectation. However, as an interim step, this patch increases the
requirement everywhere except x86 / x86_64 (since the controversy was
only about those architectures); the special caveats and settings can
easily be removed later when we're ready to increase the requirements
on x86 / x86_64 (and if someone would like to raise the issue on LWN
as suggested in the previous discussion, that would be welcome). 3.2
kernel headers are required everywhere by this patch.
(x32 already requires 3.4 or later, so is unaffected by this patch.)
As usual for such a change, this patch only changes the configure
scripts and associated documentation. The intent is to follow up with
removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_*
or other macro that becomes dead can then be removed independently.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Define to 3.2.0.
(arch_minimum_kernel): Likewise.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Define to 2.6.32.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Define to 2.6.32.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Document Linux 3.2 requirement.
* manual/install.texi (Linux): Document Linux 3.2 headers
requirement.
* INSTALL: Regenerated.
The handling of negative offsets in MIPS mmap is inconsistent with
other architectures, as shown by failure of the test
posix/tst-mmap-offset for o32 and n32. The MIPS mmap syscall uses a
signed argument and does a signed arithmetic shift on it, whereas the
glibc semantics expected by that test are for the offset to be
considered as a large positive offset. This patch makes MIPS
consistent with other architectures as far as possible by using the
mmap2 syscall on o32 (#including the generic implementation), and
making mmap not an alias for mmap64 for n32, with a custom
implementation for n32 that zero-extends the offset argument to 64-bit
before calling the mmap syscall.
Tested for MIPS64 (o32, n32, n64).
[BZ #19550]
* sysdeps/unix/sysv/linux/mips/mips32/mmap.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/mmap64.c: Move to ....
* sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: ... here.
* sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (mmap64):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list (mmap):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (mmap): Remove
syscall entry.
Complement the addition of the required kernel support, present upstream
as from commit 2b5e869ecfcb3112f7e1267cb0328f3ff6d49b18 ("MIPS: ELF:
Interpret the NAN2008 file header flag") and released with Linux 4.5-rc1
on Jan 24th, 2016.
* sysdeps/unix/sysv/linux/mips/configure.ac: Set
`arch_minimum_kernel' to 4.5.0 if 2008 NaN encoding is used.
* sysdeps/unix/sysv/linux/mips/configure: Regenerate.
Testing for powerpc-nofpu showed that localplt.data was out of date.
Two new soft-fp functions showed up in the list: __gtsf2 and
__unordsf2; this patch adds these as optional. __signbit and
__signbitl no longer appear as local PLT entries; given the move to
__builtin_signbit* for all GCC versions supported for building glibc
(and given the use of the type-generic signbit macro within glibc),
those can safely be removed from the list, which this patch does.
Tested for powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data
(__gtsf2): Add as optional for libc.so.
(__unordsf2): Likewise.
(__signbit): Remove for libc.so.
(__signbitl): Likewise.
The previous barrier implementation did not fulfill the POSIX requirements
for when a barrier can be destroyed. Specifically, it was possible that
threads that haven't noticed yet that their round is complete still access
the barrier's memory, and that those accesses can happen after the barrier
has been legally destroyed.
The new algorithm does not have this issue, and it avoids using a lock
internally.
This patch adds some new header definitions from Linux 4.4:
* MCL_ONFAULT is added to bits/mman.h / bits/mman-linux.h (this was
already done for hppa).
* PTRACE_SECCOMP_GET_FILTER is added to sys/ptrace.h. Along with it,
the older PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, added in Linux
3.11 but missed at the time, are also added.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/mman-linux.h [!MCL_CURRENT] (MCL_ONFAULT): New macro.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_GETSIGMASK): New
enum constant and macro.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
Work around a GCC behavior with hardware transactional memory built-ins.
GCC doesn't treat the PowerPC transactional built-ins as compiler
barriers, moving instructions past the transaction boundaries and
altering their atomicity.
We define __ASSUME_ST_INO_64_BIT by default for Linux targets, and then
undef it for alpha/sh targets. But the code that uses it looks at its
value (as 0/1) rather than whether it's defined (like all other assume
knobs). Change the code to see if it's defined to fix build Wundef build
errors for alpha/sh.
The attached patch adds some upstream defines like MAP_HUGETLB and MAP_STACK
in mman.h for the hppa architecture.
The existing MADV_xxK_PAGES defines were dropped upstream, because they were
originally added many years ago based on a proposed patch for the Linux kernel
which was never applied. So, this patch drops those unneeded defines.
The personality system call, starting with linux kernel commit
v2.6.29-6609-g11d06b2a1e5658f448a308aa3beb97bacd64a940, always
successfully changes the personality if requested. The syscall
wrapper, however, still can return an error in the following cases:
- the value returned by the system call looks like an error
due to architecture limitations of 32-bit kernels;
- a personality greater than 0xffffffff is passed to the system call,
and the 64-bit kernel does not have commit
v2.6.35-rc1-372-g485d527686850d68a0e9006dd9904f19f122485e
that would truncate this value to unsigned int;
- on sparc64, the value returned by the system call looks like an error
due to sparc64 kernel sign extension bug.
The solution is three-fold:
- move generic syscalls.list personality entry to generic 64-bit
syscalls.list file;
- for each 32-bit architecture that use negated errno semantics,
add a NOERRNO personality entry to their syscalls.list file;
- for sparc64 and 32-bit architectures that use dedicated registers
to flag syscall errors, add a wrapper around personality syscall;
if the system call return value is flagged as an error, this wrapper
returns the negated "would be errno" value, otherwise it returns
the system call return value; on sparc64, it also truncates the
personality argument to unsigned int before passing it to the kernel.
[BZ #19408]
* sysdeps/unix/sysv/linux/personality.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/personality.c: Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == misc]
(sysdep_routines): Add personality.
(tests): Add tst-personality.
* sysdeps/unix/sysv/linux/syscalls.list (personality): Move ...
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: ... here.
* sysdeps/unix/sysv/linux/arm/syscalls.list (personality): New entry.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (personality):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (personality): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (personality):
Likewise.
Since GLIBC requires a minimum 2.6.32 kernel, the sysctl (CTL_BUS,
CTL_BUS_ISA, ISA_*) is always available. We can therefore remove the
fallback code reading /etc/arm_systype or parsing /proc/cpuinfo.
Remove fscanf from localplt.data as it is no longer called from within
GLIBC.
* sysdeps/unix/sysv/linux/arm/ioperm.c: Do not include <string.h>.
(PATH_ARM_SYSTYPE): Remove.
(PATH_CPUINFO): Likewise.
(IO_BASE_FOOTBRIDGE): Likewise.
(IO_SHIFT_FOOTBRIDGE): Likewise.
(struct platform): Likewise.
(init_iosys): Remove compatibility code for 2.4 kernels.
* sysdeps/unix/sysv/linux/arm/localplt.data: Remove fscanf.
POSIX and C++11 require that a thread can destroy a mutex if no other
thread owns the mutex, is blocked on the mutex, or will try to acquire
it in the future. After destroying the mutex, it can reuse or unmap the
underlying memory. Thus, we must not access a mutex' memory after
releasing it. Currently, we can load the private flag after releasing
the mutex, which is fixed by this patch.
See https://sourceware.org/bugzilla/show_bug.cgi?id=13690 for more
background.
We need to call futex_wake on the lock after releasing it, however. This
is by design, and can lead to spurious wake-ups on unrelated futex words
(e.g., when the mutex memory is reused for another mutex). This behavior
is documented in the glibc-internal futex API and in recent drafts of the
Linux kernel's futex documentation (see the draft_futex branch of
git://git.kernel.org/pub/scm/docs/man-pages/man-pages.git).
Since times returns 64-bit clock_t on x32, we need to provide x32 times
by redefining INTERNAL_SYSCALL_NCS and INTERNAL_SYSCALL_ERROR_P with
64-bit return type for syscall. All system calls returning 64-bit
integer, which are lseek, time and times, must be handled specially for
x32. lseek is handled by x32 lseek.S and time doesn't check syscall
return. times is the only missed one. Before this patch, there are
0000000 <__times>:
0: b8 64 00 00 40 mov $0x40000064,%eax
5: 0f 05 syscall
7: 48 63 d0 movslq %eax,%rdx
^^^^^^^^^^ Incorrect signed extension
a: 48 83 fa f2 cmp $0xfffffffffffffff2,%rdx
e: 75 07 jne 17 <__times+0x17>
10: 3d 00 f0 ff ff cmp $0xfffff000,%eax
^^^^^^^^^^^^^^^^^^^^^ 32-bit compare
15: 77 11 ja 28 <__times+0x28>
17: 48 83 fa ff cmp $0xffffffffffffffff,%rdx
1b: b8 00 00 00 00 mov $0x0,%eax
20: 48 0f 45 c2 cmovne %rdx,%rax
24: c3 retq
After this patch, there are
00000000 <__times>:
0: b8 64 00 00 40 mov $0x40000064,%eax
5: 0f 05 syscall
7: 48 83 f8 f2 cmp $0xfffffffffffffff2,%rax
b: 75 08 jne 15 <__times+0x15>
d: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
13: 77 13 ja 28 <__times+0x28>
15: 48 83 f8 ff cmp $0xffffffffffffffff,%rax
19: ba 00 00 00 00 mov $0x0,%edx
1e: 48 0f 44 c2 cmove %rdx,%rax
22: c3 retq
The incorrect signed extension and 32-bit compare are gone.
[BZ #19363]
* sysdeps/unix/sysv/linux/x86_64/x32/times.c: New file.
X86-64 system calls use a different calling convention, which clobbers
CC, %r11 an %rcx registers. Define REGISTERS_CLOBBERED_BY_SYSCALL for
x86-64 inline asm statements.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(REGISTERS_CLOBBERED_BY_SYSCALL): New.
(INTERNAL_SYSCALL_NCS): Use it.
(INTERNAL_SYSCALL_NCS_TYPES): Likewise.
According to Silvermont software optimization guide, for 64-bit
applications, branch prediction performance can be negatively impacted
when the target of a branch is more than 4GB away from the branch. Add
the Prefer_MAP_32BIT_EXEC bit so that mmap will try to map executable
pages with MAP_32BIT first. NB: MAP_32BIT will map to lower 2GB, not
lower 4GB, address. Prefer_MAP_32BIT_EXEC reduces bits available for
address space layout randomization (ASLR), which is always disabled for
SUID programs and can only be enabled by setting environment variable,
LD_PREFER_MAP_32BIT_EXEC.
On Fedora 23, this patch speeds up GCC 5 testsuite by 3% on Silvermont.
[BZ #19367]
* sysdeps/unix/sysv/linux/wordsize-64/mmap.c: New file.
* sysdeps/unix/sysv/linux/x86_64/64/dl-librecon.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise.
* sysdeps/x86/cpu-features.h (bit_Prefer_MAP_32BIT_EXEC): New.
(index_Prefer_MAP_32BIT_EXEC): Likewise.
Various Linux kernel syscalls have become obsolete over time.
Specifically, the following are obsolete in all kernel versions
supported by glibc, are not present for architectures more recently
added to the kernel, and as such, the wrapper functions for them
should be compat symbols, not in static libc and not available for new
links with shared libc.
* bdflush: in Linux 2.6, does nothing if present.
* create_module get_kernel_syms query_module: Linux 2.4 module
interface, syscalls not present in Linux 2.6.
* uselib: part of the mechanism for loading a.out shared libraries,
irrelevant with ELF.
This patch adds support for syscalls.list to list syscall aliases of
the form NAME@VERSION:OBSOLETED, with SHLIB_COMPAT conditionals being
generated for such aliases. Those five syscalls are then made into
compat symbols (obsoleted in glibc 2.23, so future ports won't have
these symbols at all), with the header <sys/kdaemon.h> declaring
bdflush being removed. When we move to 3.2 as minimum kernel version,
the same can be done for nfsservctl (removed in Linux 3.1) as well.
Tested for x86_64 and x86 (testsuite, as well as checking that the
symbols in question indeed become compat symbols, that they are indeed
omitted from static libc, and that the generated SHLIB_COMPAT
conditionals look right).
[BZ #18472]
* sysdeps/unix/Makefile ($(objpfx)stub-syscalls.c): Handle entries
for the form NAME@VERSION:OBSOLETED and generate SHLIB_COMPAT
conditionals for them.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Likewise.
* sysdeps/unix/sysv/linux/sys/kdaemon.h: Remove file.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove
sys/kdaemon.h.
* sysdeps/unix/sysv/linux/syscalls.list (bdflush): Make into
compat-only syscall, obsoleted in glibc 2.23.
(create_module): Likewise.
(get_kernel_syms): Likewise.
(query_module): Likewise.
(uselib): Likewise.
* manual/sysinfo.texi (System Parameters): Do not mention bdflush.
Now that we have __ASSUME_* macros for direct socket syscalls to use
them instead of socketcall when they can be assumed to be available on
socketcall architectures, this patch defines those macros when
appropriate for i386, m68k, microblaze and sh (for 4.3, 4.3, all
supported kernels and 2.6.37, respectively; the only use of socketcall
support on microblaze is it allows accept4 and sendmmsg to be
supported on a wider range of kernel versions).
David, it seems that 32-bit SPARC is the only architecture supported
by glibc that still lacks these direct syscalls. It would be good to
get them added to the SPARC kernel so we can eventually eliminate
socketcall support in glibc (and thereby just use entries in
sysdeps/unix/syscalls.list for most of these functions) when we can
assume new-enough kernels.
Tested for i386 (testsuite, and that installed shared libraries are
unchanged by this patch - not using a new enough kernel, so this
doesn't actually test much, but the i386 and m68k code is essentially
the same as that already in use for s390).
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
New macro.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKET_SYSCALL): Likewise.
(__ASSUME_BIND_SYSCALL): Likewise.
(__ASSUME_CONNECT_SYSCALL): Likewise.
(__ASSUME_LISTEN_SYSCALL): Likewise.
(__ASSUME_ACCEPT_SYSCALL): Likewise.
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
(__ASSUME_SEND_SYSCALL): Likewise.
(__ASSUME_SENDTO_SYSCALL): Likewise.
(__ASSUME_RECV_SYSCALL): Likewise.
(__ASSUME_RECVFROM_SYSCALL): Likewise.
(__ASSUME_SHUTDOWN_SYSCALL): Likewise.
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SENDMSG_SYSCALL): Likewise.
(__ASSUME_RECVMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_ACCEPT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SEND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECV_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
On MIPS when the toolchain is using the O32 FPXX ABI, the testsuite
fails to build for pre-R2 CPU.
It assumes that it is possible to use the -mfp64 option to build
tst-abi-fp64amod and tst-abi-fp64mod, while this requires a CPU which
supports the mfhc1 and mthc1 instructions, ie at least a R2 CPU:
error: '-mgp32' and '-mfp64' can only be combined if the target
supports the mfhc1 and mthc1 instructions
The same way it assumes that it is possible to use the -modd-spreg option
to build tst-abi-fpxxomod and tst-abi-fp64mod, while this requires at
least a R1 CPU:
warning: the 'mips2' architecture does not support odd
single-precision registers
This patches changes that by checking the usability of -mfp64 and
-modd-spreg options in configure, and disable those tests when they can
not be used.
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.
To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors. However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.
For tile, remove the now-unnecessary exports of those functions from
libc and libm.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
Since x86-64 and x32 use the same set of sched_XXX system call interface:
[hjl@gnu-6 linux-stable]$ grep sched_
arch/x86/entry/syscalls/syscall_64.tbl
24 common sched_yield sys_sched_yield
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
[hjl@gnu-6 linux-stable]$
__cpu_mask should be unsigned long long, instead of unsigned long, for
x32. This patch adds __CPU_MASK_TYPE so that each architecture can
define the proper type for __cpu_mask.
[BZ #19313]
* bits/typesizes.h (__CPU_MASK_TYPE): New.
* sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE):
* sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace
unsigned long int with __CPU_MASK_TYPE.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
This avoids build failures in the tests, and matches what is in
bits/mathdef.h.
Update the libc and libm abilist files to include __finitel,
__isinfl, and __isnanl.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
In the course of reviewing Linux 4.3 changes for any glibc header
updates needed, I found that
sysdeps/unix/sysv/linux/netpacket/packet.h was extremely out of date
(last updated for Linux 2.3.15, it seems). This patch updates the
sets of constants present in that header to include those added to
those sets in newer kernels (include/uapi/linux/if_packet.h).
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/netpacket/packet.h (PACKET_COPY_THRESH):
New macro.
(PACKET_AUXDATA): Likewise.
(PACKET_ORIGDEV): Likewise.
(PACKET_VERSION): Likewise.
(PACKET_HDRLEN): Likewise.
(PACKET_RESERVE): Likewise.
(PACKET_TX_RING): Likewise.
(PACKET_LOSS): Likewise.
(PACKET_VNET_HDR): Likewise.
(PACKET_TX_TIMESTAMP): Likewise.
(PACKET_TIMESTAMP): Likewise.
(PACKET_FANOUT): Likewise.
(PACKET_TX_HAS_OFF): Likewise.
(PACKET_QDISC_BYPASS): Likewise.
(PACKET_ROLLOVER_STATS): Likewise.
(PACKET_FANOUT_DATA): Likewise.
(PACKET_MR_UNICAST): Likewise.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Linux 2.6.32 and forward do not show the issue regarding SysV SIGCHLD
vs. SIG_IGN for nanosleep which make it feasible to use it for sleep
implementation without requiring any hacking to handle the spurious
wake up. The issue is likely being fixed before 2.6 and git
history [1] [2].
This patch simplifies the sleep code to call nanosleep directly by
using the posix default version. It also removes the early cancellation
tests for zero argument, since nanosleep will handle cancellation
in this case.
[1] https://lkml.org/lkml/2004/11/25/5
[2] https://lkml.org/lkml/2003/11/8/50
Checked on x86_64, ppc64le, and aarch64.
[BZ #16364]
* sysdeps/unix/sysv/linux/sleep.c: Remove file
* sysdeps/posix/sleep.c (__sleep): Simplify cancellation handling.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
__lll_trylock_elision sets the adapt_count variable too
aggressively, and incorrectly on persistent aborts. Taking
a cue from s390, adapt_count is only updated if the lock
is locked, or a persistent failure occurs.
In addition, the abort codes have been renumbered and
refactored for clarity. As it stands, glibc only cares
if the abort is persistent or not.
All aborts are now persistent, excepting a busy lock. This
includes changing _ABORT_NESTED_TRYLOCK into a persistent
abort.
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Fix setting of adapt_count.
* sysdeps/unix/sysv/linux/powerpc/htm.h
(_ABORT_PERSISTENT): Define to clarify persistent aborts.
(_ABORT_NESTED_TRYLOCK): Renumber, and make persistent.
(_ABORT_SYSCALL): Renumber, and clarify definition.
(_ABORT_LOCK_BUSY): Renumber, make non-persistent.
For each function setjmp, longjmp, getcontext, there exist a symbol
<func> and a default/versioned symbol <func>@@GLIBC_2.x in the build
obj-files.
This is wrong because it should only exist an unversioned or a
default-versioned symbol with the same name in an obj-file.
Glibc can't be build with recent binutils. See the already fixed linker
bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073.
Nevertheless, this patch cleans this up.
Furthermore the BSD entry points setjmp, _setjmp were marked as weak,
but should be strong as on other architectures.
(see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an
older discussion with Andreas Schwab)
Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S,
too. But there is no change in the assembler code.
ChangeLog:
* sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp):
Don't create weak aliases,
because versioned symbols are created later.
* sysdeps/s390/s390-32/setjmp.S
(setjmp, _setjmp): Remove weak and rename to an unique name
in SHARED case due to existing versioned symbols.
* sysdeps/s390/s390-64/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S
(getcontext): Create weak alias only in non SHARED case.
* sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
this patch calls direct system calls for socket operations in the same way as power does. The system calls were introduced in kernel commit https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=977108f89c989b1eeb5c8d938e1e71913391eb5f.
There are no direct recv, send, accept syscalls available on s390. Thus
recvfrom, sendto, accept4 are called instead of the socketcall by defining __ASSUME_*_FOR_*_SYSCALL macros. See recv.c, send.c, accept.c in sysdeps/unix/sysv/linux/ folder.
The socketcalls in syscalls.list for s390-64 are removed. They were never used on s390x.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/kernel-features.h:
(__ASSUME_*_SYSCALL) Define new macros.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list:
Remove socketcall syscalls.
* sysdeps/unix/sysv/linux/accept.c (__libc_accept):
Use accept4 if defined __ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL.
* sysdeps/unix/sysv/linux/recv.c (__libc_recv):
Use recvfrom if defined __ASSUME_RECVFROM_FOR_RECV_SYSCALL.
* sysdeps/unix/sysv/linux/send.c (__libc_send):
Use sendto if defined __ASSUME_SENDTO_FOR_SEND_SYSCALL.
The recvmsg system calls for netlink sockets have been particularly
prone to picking up unrelated data after a file descriptor race
(where the descriptor is closed and reopened concurrently in a
multi-threaded process, as the result of a file descriptor
management issue elsewhere). This commit adds additional error
checking and aborts the process if a datagram of unexpected length
(without the netlink header) is received, or an error code which
cannot happen due to the way the netlink socket is used.
[BZ #12926]
Terminate process on invalid netlink response.
* sysdeps/unix/sysv/linux/netlinkaccess.h
(__netlink_assert_response): Declare.
* sysdeps/unix/sysv/linux/netlink_assert_response.c: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == inet]
(sysdep_routines): Add netlink_assert_response.
* sysdeps/unix/sysv/linux/check_native.c (__check_native): Call
__netlink_assert_response.
* sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise.
* sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise.
* sysdeps/unix/sysv/linux/Versions (GLIBC_PRIVATE): Add
__netlink_assert_response.
The new format lists the version on each line, as in:
VERSION SYMBOL TYPE [VALUE]
This makes it easier to process the files with line-oriented tools.
The abilist files were converted with this awk script:
/^[^ ]/ { version = $1 }
/^ / { print version, substr($0, 2) }
And sorted under the "C" locale with sort.
The skip_lock_out_of_tbegin_retries adaptive parameter was
not being used correctly, nor as described. This prevents
a fallback for all users of the lock if a transient abort
occurs within the accepted number of retries.
[BZ #19174]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of
.skip_lock_out_of_tbegin_retries.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Likewise, and respect a value of
try_tbegin <= 0.
Since GLIBC requires a minimum 2.6.32 kernel, the patch cleanups
the mips code to assume __NR_sync_file_range and the powerpc one
to either assume __NR_sync_file_range2 or __NR_sync_file_range.
Checked on powerpc64le and build for mips (ABIO32, ABIN32, and ABI64).
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sync_file_range.c
(__NR_sync_file_range2): Assume it is always defined.
* sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c
(__NR_sync_file_range): Assume it is always defined.
Need to provide i386 __libc_do_syscall when PROF is defined.
Define OPTIMIZE_FOR_GCC_5 for .S files so that it can be used
in libc-do-syscall.S.
* sysdeps/unix/sysv/linux/i386/libc-do-syscall.S: Replace
__GNUC_PREREQ (5,0) with OPTIMIZE_FOR_GCC_5.
* sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5):
Moved before "#ifdef __ASSEMBLER__".
PSEUDO_END and PSEUDO_END_NOERRNO are being defined in
sysdeps/unix/sysdep.h and then redefined for tile. Add an
undef before each define to silence the warnings.
Since asm ("ebp") can't be used to put the 6th argument in %ebp for
syscall when compiling for profiling, we disable GCC 5 optimization
when PROF is defined.
* sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5):
New. Defined for GCC 5 and above when not compiling for
profiling.
Replace __GNUC_PREREQ (5,0) with OPTIMIZE_FOR_GCC_5.
Since -fomit-frame-pointer is compatible with -pg, apply it only to
.o/.os files.
* sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c):
Renamed to ...
(CFLAGS-epoll_pwait.o): This.
(CFLAGS-mmap.c): Renamed to ...
(CFLAGS-mmap.o): This.
(CFLAGS-mmap64.c): Renamed to ...
(CFLAGS-mmap64.o): This.
(CFLAGS-epoll_pwait.os): New.
(CFLAGS-mmap.os): Likewise.
(CFLAGS-mmap64.os): Likewise.
(CFLAGS-semtimedop.os): Likewise.
(CFLAGS-semtimedop.c): Renamed to ...
(CFLAGS-semtimedop.o): This.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
With TLE enabled, the adapt count variable update incurs
an 8% overhead before entering the critical section of an
elided mutex.
Instead, if it is done right after leaving the critical
section, this serialization can be avoided.
This alters the existing behavior of __lll_trylock_elision
as it will only decrement the adapt_count if it successfully
acquires the lock.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Remove adapt_count decrement...
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
(__lll_unlock_elision): ... to here. And utilize
new adapt_count parameter.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(__lll_unlock_elision): Update to include adapt_count
parameter.
(lll_unlock_elision): Pass pointer to adapt_count
variable.
Adding this parameter will give architectures more freedom in
how they choose to update this variable. This change has no
effect on architectures which choose not to use it.
* nptl/pthread_mutex_unlock.c(lll_unlock_elision):
Add elision adapt_count parameter to list of arguments.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_unlock_elision): Update with new parameter list
* sysdeps/unix/sysv/linux/s390/lowlevellock.h
(lll_unlock_elision): Likewise
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h
(lll_unlock_elision): Likewise
Only i386 implements epoll_pwait in assembly code withot cancellation
support. All other architectures implement epoll_pwait in epoll_pwait.c
with
int epoll_pwait (int epfd, struct epoll_event *events,
int maxevents, int timeout,
const sigset_t *set)
{
return SYSCALL_CANCEL (epoll_pwait, epfd, events, maxevents,
timeout, set, _NSIG / 8);
}
Although there is no test for epoll_pwait in glibc, since SYSCALL_CANCEL
works on i386 and epoll_pwait.c works for other architectures, it is
safe to assume that epoll_pwait.c with SYSCALL_CANCEL also works on
i386.
[BZ #19137]
* sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c):
Add -fomit-frame-pointer.
* sysdeps/unix/sysv/linux/i386/epoll_pwait.S: Remove file.
This patch adds an internal entry for __sched_getaffinity_new so that
__sched_getaffinity_old calls __sched_getaffinity_new without going
through PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/sched_getaffinity.c
(__sched_getaffinity_new): Add libc_hidden_proto and
libc_hidden_def.
Linker in binutils 2.26 and newer generate GOT references instead
PLT references when -z now is passed to linker. We need to extend
scripts/localplt.awk to allow PLT or GOT references.
[BZ #19007]
* scripts/localplt.awk: Also allow GOT references.
* sysdeps/unix/sysv/linux/i386/localplt.data: Mark
_Unwind_Find_FDE, calloc, memalign, realloc and __libc_memalign
with "+ REL R_386_GLOB_DAT".
* sysdeps/x86_64/localplt.data: Mark calloc, memalign, realloc
and __libc_memalign with "+ RELA R_X86_64_GLOB_DAT".
This patch uses INTERNAL_SYSCALL and INLINE_SYSCALL_ERROR_RETURN_VALUE
to avoid reading and writing errno directly so that we don't need to
call __x86.get_pc_thunk.reg to load PC into reg in case there is an
error.
* sysdeps/unix/sysv/linux/i386/brk.c (__brk): Use
INLINE_SYSCALL_ERROR_RETURN_VALUE.
* sysdeps/unix/sysv/linux/i386/fxstatat.c (__fxstatat):
Likewise.
* sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise.
* sysdeps/unix/sysv/linux/i386/seteuid.c (seteuid): Likewise.
* sysdeps/unix/sysv/linux/i386/fxstat.c (__fxstat): Use
INTERNAL_SYSCALLINTERNAL_SYSCALL and
INLINE_SYSCALL_ERROR_RETURN_VALUE.
* sysdeps/unix/sysv/linux/i386/lockf64.c (lockf64): Likewise.
* sysdeps/unix/sysv/linux/i386/lxstat.c (__lxstat): Likewise.
* sysdeps/unix/sysv/linux/i386/sigaction.c (__libc_sigaction):
Likewise.
* sysdeps/unix/sysv/linux/i386/xstat.c (__xstat): Likewise.
This patch sets lseek/llseek for 64-bit, MIPS n32, and x86_32 as non-
cancelable. This make it consistant with 32-bit platform.
Tested on i686, x86_64, and x32.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (lseek): Set as
non-cancelable.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (llseek): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/lseek.S (__libc_lseek64):
Likewise.
Since we require a new enough kernel all the time, the __ASSUME_FDATASYNC
define has been hardcoded to 1. That means we can delete the alpha file
for fdatasync now and rely on the syscalls list like other ports.
Profiling git's test suite, Linus noted [1] that a disproportionately
large amount of time was spent reading /proc/meminfo. This is done by
the glibc functions get_phys_pages and get_avphys_pages, but they only
need the MemTotal and MemFree fields, respectively. That same
information can be obtained with a single syscall, sysinfo, instead of
six: open, fstat, mmap, read, close, munmap. While sysinfo also
provides more than necessary, it does a lot less work than what the
kernel needs to do to provide the entire /proc/meminfo. Both strace -T
and in-app microbenchmarks shows that the sysinfo() approach is
roughly an order of magnitude faster.
sysinfo() is much older than what glibc currently requires, so I don't
think there's any reason to keep the old parsing code. Moreover, this
makes get_[av]phys_pages work even in the absence of /proc.
Linus noted that something as simple as 'bash -c "echo"' would trigger
the reading of /proc/meminfo, but gdb says that many more applications
than just bash are affected:
Starting program: /bin/bash "-c" "echo"
Breakpoint 1, __get_phys_pages () at ../sysdeps/unix/sysv/linux/getsysstats.c:283
283 ../sysdeps/unix/sysv/linux/getsysstats.c: No such file or directory.
(gdb) bt
So it seems that any application that uses qsort on a moderately sized
array will incur this cost (once), which is obviously proportionately
more expensive for lots of short-lived processes (such as the git test
suite).
[1] http://thread.gmane.org/gmane.linux.kernel/2019285
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
* sysdeps/unix/sysv/linux/getsysstats.c (__get_phys_pages):
Use sysinfo system call instead of parsing /proc/meminfo.
* sysdeps/unix/sysv/linux/getsysstats.c (__get_avphys_pages):
Likewise.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
Commit f4491417cc introduced some warnings
when building GLIBC with GCC 5.x. similar to those fixed by commit
dd6e8af6ba. This patch fixes those warnings.
* sysdeps/unix/sysv/linux/socketpair.c: Use the address of the
first member of struct sv in syscall macro.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/m68k-vdso.h to plain m68k-vdso.h to follow
that convention.
[BZ #14912]
* sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.h: ...here.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Include
<m68k-vdso.h> instead of <bits/m68k-vdso.h>.
* sysdeps/unix/sysv/linux/m68k/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.c: Likewise.
This patch adds new constants from Linux 4.2 to netinet/in.h:
IPPROTO_MPLS and IP_BIND_ADDRESS_NO_PORT (both in
include/uapi/linux/in.h in Linux; one directly in netinet/in.h, one in
bits/in.h in glibc).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
* inet/netinet/in.h (IPPROTO_MPLS): New enum value and macro.
* sysdeps/unix/sysv/linux/bits/in.h (IP_BIND_ADDRESS_NO_PORT): New
macro.
This patch fixes the default wordsize-32 mmap implementation offset
calculation for negative values. Current code uses signed shift
operation to calculate the multiple size to use with syscall and
it is implementation defined. Change it to use a division base
on mmap page size (default being as before, 4096).
Tested on armv7hf.
[BZ #18877]
* posix/Makefile (tests): Add tst-mmap-offset.
* posix/tst-mmap.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c (__mmap): Fix
offset calculation for negative values.
Power ISA 2.07B section B.5.5 relaxed the barrier requirement around a
TLE enabled lock. It is now identical to a traditional lock.
2015-08-26 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__arch_compare_and_exchange_val_32_acq): Remove and use common
definition. ISA 2.07B no longer requires full sync.
The HWCAP_S390_VX flag in hwcap field of auxiliary vector indicates
if the vector facility is available and the kernel is aware of it.
This can be tested with LD_SHOW_AUXV=1 <prog>.
Currently it does not show te, because it was not incremented
by commit "S/390: Add hwcap value for transactional execution.".
Thus _DL_HWCAP_COUNT is incremented by two.
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_platforms): Add vector flag.
* sysdeps/s390/dl-procinfo.h: Add vector capability.
* sysdeps/unix/sysv/linux/s390/bits/hwcap.h (HWCAP_S390_VX): Define.
Since _dl_x86_64_save_sse and _dl_x86_64_restore_sse are removed now,
we don't need to run tst-getpid2 with LD_BIND_NOW=1.
[BZ #11214]
* sysdeps/unix/sysv/linux/Makefile (tst-getpid2-ENV): Removed.
Explicit system calls for the socket operations were added in Linux kernel
in commit 86250b9d12ca for powerpc. This patch make use of those instead of
calling socketcall to save number of cycles on networking syscalls.
2015-08-25 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h: Define new macros.
* sysdeps/unix/sysv/linux/accept.c: Call direct system call.
* sysdeps/unix/sysv/linux/bind.c: Call direct system call.
* sysdeps/unix/sysv/linux/connect.c: Call direct system call.
* sysdeps/unix/sysv/linux/getpeername.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockname.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/listen.c: Call direct system call.
* sysdeps/unix/sysv/linux/recv.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvfrom.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/send.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendto.c: Call direct system call.
* sysdeps/unix/sysv/linux/setsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/shutdown.c: Call direct system call.
* sysdeps/unix/sysv/linux/socket.c: Call direct system call.
* sysdeps/unix/sysv/linux/socketpair.c: Call direct system call.
Fix usage of tabort in generated syscalls. r0 has special meaning
when used with this instruction, thus it will not generate
persistent errors, nor return an error code. This mitigates poor
CPU usage when performing elided critical sections.
Additionally, transactions should be aborted when entering a user
invoked syscall. Otherwise the results of the transaction may be
undefined.
2015-08-25 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION): Use
register other than r0 for tabort, it has special meaning.
* sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION): Likewise
* sysdeps/unix.sysv/linux/powerpc/syscall.S (syscall): Abort
transaction before starting syscall.
PowerPC has always used __IPC_64 like most other architectures, which
means that __ASSUME_IPC64 can be always true. Also, all other
architecture implementations that use the ipc syscall are effectively
identical to the generic version and can be removed.
Move sysdeps/x86_64/multiarch/init-arch.h to sysdeps/x86/init-arch.h
which can be used for both i386 and x86_64.
* sysdeps/i386/i686/multiarch/init-arch.h: Removed.
* sysdeps/unix/sysv/linux/x86/init-arch.h: Likewise.
* sysdeps/x86_64/cacheinfo.c: Include <init-arch.h> instead
of "multiarch/init-arch.h".
* sysdeps/x86_64/multiarch/init-arch.h: Renamed to ...
* sysdeps/x86/init-arch.h: This.
Both files include sysdeps/x86_64/multiarch/init-arch.c which has been
removed.
* sysdeps/i386/i686/multiarch/init-arch.c: Removed.
* sysdeps/unix/sysv/linux/x86/init-arch.c: Likewise.
__xstat_conv, __xstat64_conv and __xstat32_conv are internal to glibc.
They should be marked as hidden so that they can't be called without
PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/xstatconv.h (__xstat_conv): Add
attribute_hidden.
(__xstat64_conv): Likewise.
(__xstat32_conv): Likewise.
Since _dl_x86_cpu_features is always available, we can use x86-64
cacheinfo.c and sysconf.c for both i386 and x86-64.
* sysdeps/i386/i686/Makefile
[$(subdir) == string] (sysdep_routines): Moved to ...
* sysdeps/i386/Makefile: Here.
* sysdeps/i386/i686/cacheinfo.c: Moved to ...
* sysdeps/i386/cacheinfo.c: Here.
* sysdeps/unix/sysv/linux/i386/sysconf.c: Removed.
* sysdeps/unix/sysv/linux/i386/i686/sysconf.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysconf.c: Moved to ...
* sysdeps/unix/sysv/linux/x86/sysconf.c: Here.
This patch updates x86 elision-conf.c to use the newly defined
HAS_CPU_FEATURE from <cpu-features.h>.
* sysdeps/unix/sysv/linux/x86/elision-conf.c (elision_init):
Replace HAS_RTM with HAS_CPU_FEATURE (RTM).
No other arch exports these defines, and having them in the default
namespace causes conformance header tests to fail. Put them behind
the __USE_MISC define as that is what other arches seem to use.
The attached change fixes the miscompilation of sched_setaffinity() on
hppa. This is an old problem that was fixed on other architectures using
a similar approach to the attached change. See:
https://sourceware.org/ml/libc-hacker/2004-04/msg00016.html
Build tested on trunk. Patch has been applied to debian glibc for some time.
As noted in the bug, the asm operands need to be copied to register
variables to avoid operand reloads in the principal asm of the macro.
See the arm implementation for reference. Otherwise we get:
../sysdeps/unix/sysv/linux/hppa/bits/atomic.h:68:6: error:
can't find a register in class 'R1_REGS' while reloading 'asm'
Build tested on trunk with gcc-4.8. Similar patch has been tested
with 2.19 on Debian hppa-unknown-linux-gnu.
The semi-recent SYSCALL_CANCEL inclusion broke microblaze due to the
sysdep.h header not including the unix/sysdep.h header. Include it
here like all other ports.
Subtract stack by 24 bytes instead of 16 bytes so that stack is aligned
to 16 bytes when calling __gettimeofday.
[BZ #18661]
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S
(__lll_timedwait_tid): Align stack to 16 bytes when calling
__gettimeofday.
Don't use pop to restore %rdi so that stack is aligned to 16 bytes
when calling __setcontext.
[BZ #18661]
* sysdeps/unix/sysv/linux/x86_64/__start_context.S
(__start_context): Don't use pop to restore %rdi so that stack
is aligned to 16 bytes when calling __setcontext.
The semi-recent SYSCALL_CANCEL inclusion broke hppa due to the sysdep.h
headers not including the unix/sysdep.h headers. Rework the includes so
we match the other ports:
* hppa/sysdep.h:
- Do not include sys/syscall.h as the unix sysdep.h headers do it.
- Do not include config.h as libc-symbols.h does it, and it has no
#ifdef multiple-include protection, and it breaks when some files
do things like #undef __OPTIMIZE__.
* sysdeps/unix/sysv/linux/hppa/sysdep-cancel.h:
- Drop the generic/sysdep.h as the unix sysdep.h headers include it.
* sysdeps/unix/sysv/linux/hppa/sysdep.h:
- Change to the unix & core hppa sysdep header stacks.
- Undef a few defines that the core headers already set up for us.
The semi-recent SYSCALL_CANCEL macro imposes a slight nuance on the
implementation of INLINE_SYSCALL: the nr argument cannot be expanded
directly but must be passed on to another macro which may expand it.
Most arches don't notice because INLINE_SYSCALL is defined in terms
of INTERNAL_SYSCALL which has the additional layer of expansion, but
on hppa, it was attempting to expand it directly. That causes build
errors like so:
../sysdeps/unix/sysv/linux/sigsuspend.c: In function '__sigsuspend':
../sysdeps/unix/sysv/linux/sigsuspend.c:31:62: error:
implicit declaration of function 'LOAD_ARGS___SYSCALL_NARGS'
../sysdeps/unix/sysv/linux/sigsuspend.c:31:304: error:
called object 'LOAD_ARGS___SYSCALL_NARGS(set, 8)' is not a function
So rewrite hppa's INLINE_SYSCALL to use INTERNAL_SYSCALL like other
arches do. This is also a nice clean up as the two macros had quite
a bit of duplicated logic.
On x86, linker in binutils 2.26 and newer consolidates R_*_JUMP_SLOT with
R_*_GLOB_DAT relocation against the same symbol. This patch extends
local PLT reference check to support alternate relocations.
[BZ #18078]
* scripts/check-localplt.awk: Support alternate relocations.
* scripts/localplt.awk: Also check relocations in DT_RELA/DT_REL
sections.
* sysdeps/unix/sysv/linux/i386/localplt.data: Mark free and
malloc entries with + REL R_386_GLOB_DAT.
* sysdeps/x86_64/localplt.data: New file.
This define made more sense in the pre-sanitized kernel headers days,
but since we require kernel versions that are sanitized, we don't need
this hack anymore.
Since ia64 is little endian, sa_flags has to come before the padding
when splitting it from 64bits to 32bits.
Reported-by: Joseph Myers <joseph@codesourcery.com>
It turns out tile suffered from the same problem as S390. However,
disabling CFI information for the __startcontext on tile was not
sufficient to fix the problem; I think the backtracer will just
blindly try to follow the link register (lr) in that case.
Instead, the change adds a cfi_undefined directive for "lr"
and then arranges to call __startcontext directly when the new
context starts, rather than just synthesizing a return to it.
In addition to being a bit easier now to understand the control
flow, this also allows the cfi_undefined directive to be placed in
a way that causes it to be in force at the address that the "lr"
from the called function points to.
Commit a059d359d8 changed the sigaction
struct to pass conform tests, but it ended up also changing the ABI for
32 bit builds. For 64 bit builds, changing the long to two ints works,
but for 32 bit builds, it inserts 4 extra bytes. This leads to many
packages randomly failing like bash that spews things like:
configure: line 471: wait_for: No record of process 0
Bracket the new member by a wordsize check to fix the ABI for 32bit.
X86 struct siginfo in kernel 3.19 has been changed by
commit ee1b58d36aa1b5a79eaba11f5c3633c88231da83
Author: Qiaowei Ren <qiaowei.ren@intel.com>
Date: Fri Nov 14 07:18:19 2014 -0800
mpx: Extend siginfo structure to include bound violation information
This patch adds new fields about bound violation into siginfo
structure. si_lower and si_upper are respectively lower bound
and upper bound when bound violation is caused.
This patch updates x86 struct siginfo to enable GDB with MPX support.
[BZ #18696]
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h (_sigfault): Add
si_addr_bnd.
(si_lower): New.
(si_upper): Likewise.
This adds new functions for futex operations, starting with wait,
abstimed_wait, reltimed_wait, wake. They add documentation and error
checking according to the current draft of the Linux kernel futex manpage.
Waiting with absolute or relative timeouts is split into separate functions.
This allows for removing a few cases of code duplication in pthreads code,
which uses absolute timeouts; also, it allows us to put platform-specific
code to go from an absolute to a relative timeout into the platform-specific
futex abstractions..
Futex operations that can be canceled are also split out into separate
functions suffixed by "_cancelable".
There are separate versions for both Linux and NaCl; while they currently
differ only slightly, my expectation is that the separate versions of
lowlevellock-futex.h will eventually be merged into futex-internal.h
when we get to move the lll_ functions over to the new futex API.
