It tests long names and ENAMETOOLONG handling, specifically
for readdir_r. This is a regression test for bug 14699,
bug 32124, and bug 32128.
Reviewed-by: DJ Delorie <dj@redhat.com>
It is not necessary to do the conversion at the getdents64
layer for readdir64_r. Doing it piecewise for readdir64
is slightly simpler and allows deleting __old_getdents64.
This fixes bug 32128 because readdir64_r handles the length
check correctly.
Reviewed-by: DJ Delorie <dj@redhat.com>
The tests check that O_EXCL is used properly, that 0600 is used
as the mode, that the characters used are as expected, and that
the distribution of names generated is reasonably random.
The tests run very slowly on some kernel versions, so make them
xtests.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add tests of special cases for freopen that were omitted from the more
general tests of different modes and similar issues. The special
cases in the three tests here are logically unconnected, it was simply
convenient to put these tests in one patch.
* Test freopen with a NULL path to the new file, in a chroot. Rather
than asserting that this fails (logically, failure in this case is
an implementation detail; it's not required for freopen to rely on
/proc), verify that either it fails (without memory leaks) or that
it succeeds and behaves as expected on success. There is no check
for file descriptor leaks because the machinery for that also
depends on /proc, so can't be used in a chroot.
* Test that freopen and freopen64 are genuinely different in
configurations with 32-bit off_t by checking for an EFBIG trying to
write past 2GB in a file opened with freopen in such a configuration
but no error with 64-bit off_t or when opening with freopen64.
* Test freopen of stdin, stdout and stderr.
Tested for x86_64 and x86.
The test tst-strtod-underflow covers various edge cases close to the
underflow threshold for strtod (especially cases where underflow on
architectures with after-rounding tininess detection depends on the
rounding mode). Make it use the type-generic machinery, with
corresponding test inputs for each supported floating-point format, so
that other functions in the strtod family are tested for underflow
edge cases as well.
Tested for x86_64.
There is very little test coverage of inputs to strtod-family
functions that don't contain anything that can be parsed as a number
(one test of ".y" in tst-strtod2), and none that I can see of skipping
initial whitespace. Add some tests of these things to tst-strtod2.
Tested for x86_64.
Although there are some tests in tst-strtod2 and tst-strtod3 for the
end pointer provided by strtod when it doesn't parse the whole string,
they aren't very thorough. Add tests of more such cases to
tst-strtod2.
Tested for x86_64.
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert tst-strtod2 and tst-strtod5 to use the type-generic machinery
so they test all floating types. I haven't tried to convert them to
use newer test interfaces in other ways, just made the changes
necessary to use the type-generic machinery.
Tested for x86_64.
Previously, the second occurrence of the xtests target
expected all xtests to run (as the result of specifying
$(xtests)), but these tests have not been run due to
the the first xtests target is set up for run-built-tests=no:
it only runs tests in $(xtests-special). Consequently,
xtests are reported as UNSUPPORTED with “make xcheck
run-built-tests=no”. The xtests were not built, either.
After this change always, xtests are built regardless
of the $(run-built-tests) variable (except for xtests listed
in $(tests-unsupported)). To fix the UNSUPPORTED issue,
introduce xtests-expected and use that manage test
expectations in the second xtests target.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add new testcase elf/tst-startup-errno.c which tests that errno is set
to 0 at first ELF constructor execution and at the start of the
program's main function.
Tested for x86_64
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add new file libio/tst-fclose-unopened2.c that tests whether fclose on an
unopened file returns EOF.
This test differs from tst-fclose-unopened.c by ensuring the file's buffer
is allocated prior to double-fclose. A comment in tst-fclose-unopened.c
now clarifies that it is testing a file with an unallocated buffer.
Calling fclose on unopened files normally causes a use-after-free bug,
however the standard streams are an exception since they are not
deallocated by fclose.
Tested for x86_64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Usually, the second and subsequent - return EOF immediately
and do not contribute to the output, but this is not an error.
Reviewed-by: DJ Delorie <dj@redhat.com>
Check if any of the input files overlaps with the output file, and use
a temporary file in this case, so that the input is no clobbered
before it is read. This fixes bug 10460. It allows to use iconv
more easily as a functional replacement for GNU recode.
The updated output buffer management truncates the output file
if there is no input, fixing bug 32033.
Reviewed-by: DJ Delorie <dj@redhat.com>
In several converters, a __GCONV_ILLEGAL_INPUT result gets overwritten
with __GCONV_FULL_OUTPUT. As a result, iconv (the function) returns
E2BIG instead of EILSEQ. The iconv program does not see the original
EILSEQ failure, does not recognize the invalid input, and may
incorrectly exit successfully.
To address this, a new __flags bit is used to indicate a sticky input
error state. All __GCONV_ILLEGAL_INPUT results are replaced with a
function call that sets this new __GCONV_ENCOUNTERED_ILLEGAL_INPUT and
returns __GCONV_ILLEGAL_INPUT. The iconv program checks for
__GCONV_ENCOUNTERED_ILLEGAL_INPUT and overrides the exit status.
The converter changes introducing __gconv_mark_illegal_input are
mostly mechanical, except for the res variable initialization in
iconvdata/iso-2022-jp.c: this error gets overwritten with __GCONV_OK
and other results in the following code. If res ==
__GCONV_ILLEGAL_INPUT afterwards, STANDARD_TO_LOOP_ERR_HANDLER below
will handle it.
The __gconv_mark_illegal_input changes do not alter the errno value
set by the iconv function. This is simpler to implement than
reviewing each __GCONV_FULL_OUTPUT result and adjust it not to
override a previous __GCONV_ILLEGAL_INPUT result. Doing it that way
would also change some E2BIG errors in to EILSEQ errors, so it had to
be done conditionally (under a flag set by the iconv program only), to
avoid confusing buffer management in other applications.
Reviewed-by: DJ Delorie <dj@redhat.com>
The __is_last field was replaced with a bitmask in
commit 85830c4c46 in 2000,
and multiple bits are in use today.
Reviewed-by: DJ Delorie <dj@redhat.com>
On current systems, very large files are needed before
mmap becomes beneficial. Simplify the implementation.
This exposed that inptr was not initialized correctly in
process_fd. Handling multiple input files resulted in
EFAULT in read because a null pointer was passed. This
could be observed previously if an input file was not
mappable and was reported as bug 17703.
Reviewed-by: DJ Delorie <dj@redhat.com>
This enables vectorisation of C23 logp1, which is an alias for log1p.
There are no new tests or ulp entries because the new symbols are simply
aliases.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
A common use case of access () / faccessat () is checking for file
existence, not any specific access permissions. In that case, we can
avoid doing the file_check_access () RPC; whether the given path had
been successfully resolved to a file is all we need to know to answer.
This is prompted by GLib switching to use faccessat (F_OK) to implement
g_file_query_exists () for local files.
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4272
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240919101439.179663-1-bugaevc@gmail.com>
This patch adds new flag --glibctunables to the cross-test-ssh.sh script
to pass Glibc tunables to the system on which tests are executed.
The value to pass can be also provided via the GLIBC_TUNABLES environment
variable.
This works similar to the TIMEOUTFACTOR variable.
Sometimes it is useful to cross test glibc with some non-default tunable,
and a global environment variable is the easiest way to inject some
tunable value into most tests. With this patch using cross-test-ssh.sh
script becomes very similar to running a test natively on the local host
when using non-default tunable is important.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
It allows to read directories using the six readdir variants
without writing type-specific code or using skeleton files
that are compiled four times.
The readdir_r subtest for support_readdir_expect_error revealed
bug 32124.
Reviewed-by: DJ Delorie <dj@redhat.com>
And struct sched_attr.
In sysdeps/unix/sysv/linux/bits/sched.h, the hack that defines
sched_param around the inclusion of <linux/sched/types.h> is quite
ugly, but the definition of struct sched_param has already been
dropped by the kernel, so there is nothing else we can do and maintain
compatibility of <sched.h> with a wide range of kernel header
versions. (An alternative would involve introducing a separate header
for this functionality, but this seems unnecessary.)
The existing sched_* functions that change scheduler parameters
are already incompatible with PTHREAD_PRIO_PROTECT mutexes, so
there is no harm in adding more functionality in this area.
The documentation mostly defers to the Linux manual pages.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
From the existing @manpagefunctionstub{func,sec} macro,
so that URLs can be included in the manual without the
stub text.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The reading loops did not check for read failures. Addresses
a static analysis report.
Manually tested by compiling a program with the GCC's
-finstrument-functions option, running it with
“LD_PRELOAD=debug/libpcprofile.so PCPROFILE_OUTPUT=output-file”,
and reviewing the output of “debug/pcprofiledump output-file”.
Improve small memsets by avoiding branches and use overlapping stores.
Use DC ZVA for copies over 128 bytes. Remove unnecessary code for ZVA sizes
other than 64 and 128. Performance of random memset benchmark improves by 24%
on Neoverse N1.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since the last operation is destructive, the first argument to the FMA
also has to be the first argument to the special-case in order to
avoid unnecessary MOVs. Reorder arguments and adjust special-case
bounds to facilitate this.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
As recently discussed, document that freopen does not work with
streams opened with functions such as popen, fmemopen, open_memstream
or fopencookie. I've filed
<https://austingroupbugs.net/view.php?id=1855> to clarify this issue
in POSIX.
Tested with "make info" and "make html".
Using TLS directly introduces a GLIBC_PRIVATE ABI dependency
into libc_nonshared.a, and thus indirectly into applications.
Adding the !defined LIBC_NONSHARED condition deactivates direct
TLS access, and libc_nonshared.a code switches to using
__errno_location, like application code.
Currently, this has no effect because there is no code in
libc_nonshared.a that accesses errno.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sync tzselect, zdump, zic to TZDB 2024b. This patch incorporates the
following TZDB source code changes:
6903dde3 Release 2024b
812aff32 Improve historical transitions in Mexico 1921-1997
52662566 Adjust to mailing list software change
7748036b Mention Internet RFC 9557
339e81d1 Mention Levine’s proposal to replace leap seconds
b4e6ad2d No leap second on 2024-12-31
7eb5bf88 Asia/Choibalsan is now an alias for Asia/Ulaanbaatar
43450cbf Improve historical data for Portugal and former possessions.
13d7348b Typo and validation fixes.
3c39cde8 Fix typo for “removed” in a comment
03fd9e45 More documentation updates for POSIX.1-2024
eb3bcceb POSIX.1-2014 is now published
913b0410 tzselect: support POSIX.1-2024 offset range
b5318b55 Document POSIX.1-2024 better
837609b7 Fix typo when making .txt man pages
d56ae6ee SUPPORT_C89 now defaults to 1, not 0
b1fe113d Port ! to Solaris make
8f1fd321 Avoid crash in Solaris 10 /usr/xpg4/bin/make
e0fcfdd6 Use ‘export VAR=VAL’ syntax
eba43166 Avoid an awk invocation via $'...'
36479a80 Avoid some subshells in tzselect
7f6cf054 * tzselect.ksh: Assume POSIX.2 awk.
a1cf1daf * tzselect.ksh: Assume POSIX.2 $PWD.
a9b8e536 Assume POSIX.2 command substitution
eaa4ef16 Avoid subshells when possible
9dac9eb7 Prefer $PWD to $(pwd) in Makefile
fada6a4c Prefer $(CMD) to `CMD` in Makefile
3e871b9a Assume POSIX.2 and eschew ‘expr’
c5d67805 difftime isn’t pure either
5857c056 * CONTRIBUTING: Document build assumptions.
6822cc82 ‘make check’ no longer depends on curl+Internet
cc6eb255 Document GCC bug 114833 and workaround
bcbc86bf Scale back on function attribute use
c0789e46 C23 [[reproducible]] and [[unsequenced]] fixups
bbd88154 More updates to GCC_DEBUG_FLAGS for GCC 14
1a35b7c8 Spelling fixes
f71085f2 POSIX.1-2024 removes asctime_r, ctime_r
70856f8e Adjust to refactored location of ctime, ctime_r
aacd151d Update GCC_DEBUG_FLAGS for GCC 14
967dcf3b Sub-second history for Maputo and Zurich
782d0826 Make EET, MET and WET links
a0b09c02 Mark CET, CST6CDT etc. as obsolescent
db7fb40d Document SMPTE timecodes and rolling leaps
97232e18 Don’t be so sure about leap seconds going away
5b6a74fb Update some URLs
a75a6251 * zic.8: Tweak for consistency.
1e75b31f Document what %s means before any rule applies
00c96cbb Conform to RFC 8536 section 3.2 for default type
3e944959 Document problems with stripped-down TZif readers
20fc91cf Shanks is likely wrong about Maputo switch to CAT
d99589b6 * zic.8: Add missing tab character.
94e6b3b0 Switch to %z in main dataform
2cd57b93 Treat W-Eur like Port when reguarding
ad6f6d94 Check that main.zi agrees with sources
a43b030f .gitignore: Add .pdf, .ps, .s. Remove obsolete ‘yearistype’.
253ca020 * theory.html: ‘CLT’ → ‘LTC’ (per Michael H Deckers)
a3dee8c8 * NEWS: ‘how’ → ‘now’ (thanks to Paul Goyette).
ea6341c5 * theory.html: Mention NASA and CLT (per Arthur David Olson).
0dcebe37 America/Scoresbysund matches America/Nuuk from now on
b1e07fb0 Update Vzic link (thanks to Allen Winter)
a4b05030 Fix wday/mday typo in previous patch
732a4803 Document how to detect mktime failure reliably
a64067e9 ziguard.awk: generalize for proposed Portugal patch
59c861fd Line up zdump examples
66c106c9 tzfile.5: srcfix
e5553001 Fix .RS/.RE problem in tzfile.5
d647eb01 Add Doctorow book
59d4a1ba Asia/Almaty matches Asia/Tashkent from now on
d4d3c3ba * asia: Update Philippine URLs (thanks to Guy Harris).
9fc11a27 Port unlikely overflow check to C23
b52a2969 Fix 2023d NEWS typo
e48c5b53 Cite "The NTP Leap Second File"
b1dc2122 Update Israel tz-link
6cf4e912 Extrapolate less from the 2022 CGPM resolution.
It fixes glibc build with gcc master [1].
Checked on x86_64-linux-gnu and on i686-linux-gnu.
[1] https://sourceware.org/pipermail/libc-alpha/2024-September/159571.html
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
As reported in bug 23675 and shown up in the recently added tests of
different cases of freopen (relevant part of the test currently
conditioned under #if 0 to avoid a failure resulting from this bug),
freopen wrongly forces the stream to unoriented even when a mode with
,ccs= is specified, though such a mode is supposed to result in a
wide-oriented stream. Move the clearing of _mode to before the actual
reopening occurs, so that the main fopen implementation can leave a
wide-oriented stream in the ,ccs= case.
Tested for x86_64.
Add new file libio/tst-fclosed-unopened.c that tests whether fclose on
an unopened file returns EOF.
Calling fclose on unopened files normally causes a use-after-free bug,
however the standard streams are an exception since they are not
deallocated by fclose.
fclose returning EOF for unopened files is not part of the external
contract but there are dependancies on this behaviour. For example,
gnulib's close_stdout in lib/closeout.c.
Tested for x86_64.
Signed-off-by: Aaron Merey <amerey@redhat.com>
