The dbl-64 implementation of __ieee754_pow returns a NaN for pow
(qNaN, 0) when it should return 1. Normally this is covered up by the
wrappers ending up calling __kernel_standard which fixes up the result
for this case, but for -lieee the wrappers are bypassed and the bad
result gets through as a return value.
Now, the wrappers fixing this are dealing with variant error handling
that wants a result of NaN for pow (qNaN, 0), and only ever call
__kernel_standard for this case if NaN resulted from __ieee754_pow.
This leads to a question of whether the dbl-64 code might be
deliberately returning NaN in order to use those code paths. However,
I can find no sign that this is deliberate. If it were deliberate one
would expect other implementations to do the same, and would expect
the return of NaN to be very old, but it appears it came in by
accident when the present e_pow.c implementation replaced an fdlibm
implementation in 2001. So it appears to be unintended that this path
through the pow wrapper could be used at all.
So this patch fixes the implementation to return 1 in this case as
expected. This is consistent with all the other implementations. The
relevant path through the wrappers is now unreachable, so is removed
(which is the main motivation of this patch: to avoid that path
becoming accidentally reachable when implementing TS 18661-1 semantics
that pow (sNaN, 0) should return qNaN with "invalid" raised). Another
path that would require __ieee754_pow (0, 0) to return 0 is also
unreachable (as all implementations return 1, in accordance with C99
semantics), so is removed as well.
Note: we don't have anything set up to test -lieee, which in any case
is obsolescent (at some point we should remove the ability for new
programs to access _LIB_VERSION or define matherr and have it called
by glibc). So testing will be implicit through sNaN tests added when
making sNaN inputs work correctly for pow functions.
Tested for x86_64 and x86.
[BZ #20919]
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return
NaN first argument when raised to power 0.
* math/w_pow.c (__pow): Do not check for NaN or zero results from
raising to power zero.
* math/w_powf.c (__powf): Likewise.
* math/w_powl.c (__powl): Likewise.
* sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle
pow (0, 0) or pow (NaN, 0).
Some configurations may use NSS cryptographic routines but have no
static library for those routines. The following changes allow glibc to
be built and tested with --enable-nss-crypt, but without having a static
NSS library. At a high level the change does two things:
(1) Detect at configure time if static NSS crypto libraries are
available. Assumes libfreebl3.a (instead of the existing Fedora
libfreebl.a which is incomplete) which matches libfreebl3.so.
(2) If static NSS crypto libraries are _not_ available then adjust the
way in which we build tst-linkall-static. This includes excluding a
reference to crypt and not linking against libcrypt.a, all of which
will fail otherwise.
Testing assumptions:
* Static library is named libfreebl3.a (not libfreebl.a as is currently
provided in Fedora), matching libfreebl3.so shared link name.
Tested on x86_64 on Fedora with:
(a) --enable-nss-crypt, with no static NSS library support: PASS
(previous FAIL)
(b) --enable-nss-crypt, with faked static NSS library support: PASS
(unsupported)
* Requires changing elf/Makefile to include a stub
/lib64/libfreebl3.a for testing purposes.
(c) --disable-nss-crypt: PASS
(default)
No regressions on x86_64.
For details see:
https://www.sourceware.org/ml/libc-alpha/2016-11/msg00647.html
The first dlopen ("tst-latepthreadmod.so", RTLD_LOCAL | RTLD_LAZY) call
in elf/tst-latepthread.c fails on s390x with "error: dlopen failed:
.../build-s390x/elf/tst-latepthreadmod.so:
undefined symbol: this_function_is_not_defined".
In elf/tst-latepthreadmod.c, this_function_is_not_defined is a sibling
call which leads to a R_390_GLOB_DAT relocation in .rela.dyn instead of
a R_390_JMP_SLOT in .rela.plt.
As RTLD_LAZY skips the JMP_SLOT relocations, but not GLOB_DAT ones,
the dlopen call fails. If elf/tst-latepthreadmod.c is build with
-fno-optimize-sibling-calls, a JMP_SLOT relocation is generated for
this_function_is_not_defined and the test passes.
ChangeLog:
* elf/Makefile (CFLAGS-tst-latepthreadmod.c):
Add -fno-optimize-sibling-calls.
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
When I added the getpayload and setpayload functions I failed to make
the ldbl-128 functions use the _Float128 type name like most other
ldbl-128 functions do in preparation for being used to implement *f128
functions. This patch fixes them to use that name.
Tested for mips64.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Use
_Float128 instead of long double.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c (FUNC): Likewise.
Commit c7debbdfac redirected the internal strrch to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__strrchr_ppc) aliasname \
__attribute__ ((weak, alias ("__strrchr_ppc")));
This creates a __GI_strchr alias that clashes with the IFUNC symbol in
stprchr.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c (weak_alias):
Remove redirection to __strrchr_ppc.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
This patch makes build-many-glibcs.py support a "bot" action, for
repeatedly running a checkout and build cycle.
Two new configuration variables are used in bot-config.json. "delay"
indicates the time to sleep after each bot-cycle round (regardless of
whether that round actually ran any builds); "run" is a boolean, which
is false if the bot should just exit (the point of this is that you
can edit bot-config.json to set this to false to cause a running bot
to exit cleanly between builds) and true if the bot should run. The
bot does not exit if the bot-cycle process exits with error status
(that can occur when sourceware's load limiting means anonymous
version control access fails, for example), just sleeps until it's
time to try again.
The script is changed to flush stdout before running a subprocess in
bot-cycle, so that when output is redirected (as expected for a bot)
the status messages from bot-cycle appear in their proper position in
its redirected output relative to the output from the subprocesses
run, and to copy the logs directory before running builds in bot-cycle
so that the logs from at least one complete build are always available
for looking at how something failed, even while the next build is
running.
* scripts/build-many-glibcs.py: Add bot to usage message. Import
time module.
(Context.__init__): Initialize self.logsdir_old.
(Context.run_builds): Handle bot action.
(Context.bot_cycle): Copy logs directory before running builds.
(Context.bot_run_self): Take argument for whether to check
subprocess result. Flush stdout before running subprocess.
(Context.bot): New function.
(get_parser): Allow bot action.
This patch continues the process of setting up build-many-glibcs.py to
run as a bot monitoring for and reporting on build issues by adding a
bot-cycle action to the script. When this action is used, it will run
the checkout action (re-execing itself if it was changed by that
action), then rebuild whichever of host-libraries, compilers, glibcs
should be rebuilt based on changed versions, time elapsed and state of
previous builds. Email is sent with the results of the build (for
each build action done).
The rebuild logic is: if previous build time or versions aren't
recorded, rebuild that component. If the script has changed, rebuild
everything. If any relevant component version has changed, rebuild,
except for not rebuilding compilers if the time indicated in the bot
configuration has not passed since the last build of the compilers.
If one piece is rebuilt then rebuild subsequent pieces as well.
Using bot-cycle requires a configuration file bot-config.json in the
toplevel directory used by build-many-glibcs.py. It might contain
e.g.
{
"compilers-rebuild-delay": 604800,
"email-from": "Example Name <user@example.org>",
"email-server": "localhost",
"email-subject": "GCC 6 %(action)s %(build-time)s build results",
"email-to": "libc-testresults@sourceware.org"
}
My next intended step is adding a further action "bot" which loops
running bot-cycle then sleeping for an amount of time given in
bot-config.json. Then I'll set up a bot using that action (building
with GCC 6 branch; a bot using GCC mainline may wait until the SH
out-of-memory issues
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78460> are fixed; I
expect the bot to mail to me until it seems ready to switch to mailing
to gcc-testresults).
* scripts/build-many-glibcs.py: Add bot-cycle to usage message.
Import email.mime.text, email.utils and smtplib modules.
(Context.__init__): Initialize self.bot_config_json.
(Context.run_builds): Handle bot-cycle action.
(Context.load_bot_config_json): New function.
(Context.part_build_old): Likewise.
(Context.bot_cycle): Likewise.
(Context.bot_build_mail): Likewise.
(Context.bot_run_self): Likewise.
(get_parser): Allow bot-cycle action.
Commit 142e0a9953 redirected the internal stpcpy to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__stpcpy_ppc) aliasname \
__attribute__ ((weak, alias ("__stpcpy_ppc")));
This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in
stpcpy.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias):
Remove redirection to __stpcpy_ppc.
It is no longer needed since commit 6c444ad6e9
(elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]).
Applications do not link against ld.so and will use the definition in
libc.so, so there is no ABI impact.
This change moves the main implementation of _dl_catch_error,
_dl_signal_error to libc.so, where TLS variables can be used
directly. This removes a writable function pointer from the
rtld_global variable.
For use during initial relocation, minimal implementations of these
functions are provided in ld.so. These are eventually interposed
by the libc.so implementations. This is implemented by compiling
elf/dl-error-skeleton.c twice, via elf/dl-error.c and
elf/dl-error-minimal.c.
As a side effect of this change, the static version of dl-error.c
no longer includes support for the
_dl_signal_cerror/_dl_receive_error mechanism because it is only
used in ld.so.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Do not define
fxstat if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Ditto for
fxstatat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Ditto for
lxstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Ditto for xstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Make __lxstat
an alias of __lxstat64 if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Ditto for
__xstat.
The __longjmp symbol was left in accidentally. It is not exported
through a Versions file, but through a .symver assembler directive.
The corresponding exported symbol was removed from the non-fpu
powerpc64 targets in commit 9b9ef82358.
Continuing the refactoring of bits/mathdef.h, this patch moves the
FP_FAST_* definitions into a new bits/fp-fast.h header. Currently
this is only for FP_FAST_FMA*, but in future it would be the
appropriate place for the FP_FAST_* macros from TS 18661-1 as well.
The generic bits/mathdef.h header defines these macros based on
whether the compiler defines __FP_FAST_*. Most architecture-specific
headers, however, fail to do so, meaning that if the architecture (or
some particular processors) does in fact have fused operations, and
GCC knows to use them inline, the FP_FAST_* macros will still not be
defined.
By refactoring, this patch causes the generic version (based on
__FP_FAST_*) to be used in more cases, and so the macro definitions to
be more accurate. Architectures that already defined some or all of
these macros other than based on the predefines have their own
versions of fp-fast.h, which are arranged so they define FP_FAST_* if
either the architecture-specific conditions are true or __FP_FAST_*
are defined.
After this refactoring, various bits/mathdef.h headers for
architectures with long double = double are semantically identical to
the generic version. The patch removes those headers that are
redundant. (In fact two of the four removed were already redundant
before this patch because they did use __FP_FAST_*.)
Tested for x86_64 and x86, and compilation-only with
build-many-glibcs.py.
* bits/fp-fast.h: New file.
* sysdeps/aarch64/bits/fp-fast.h: Likewise.
* sysdeps/powerpc/bits/fp-fast.h: Likewise.
* math/Makefile (headers): Add bits/fp-fast.h.
* math/math.h: Include <bits/fp-fast.h>.
* bits/mathdef.h (FP_FAST_FMA): Remove.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/arm/bits/mathdef.h: Remove file.
* sysdeps/hppa/fpu/bits/mathdef.h: Likewise.
* sysdeps/sh/sh4/bits/mathdef.h: Likewise.
* sysdeps/tile/bits/mathdef.h: Likewise.
This patch converts the ilogb wrappers (which set errno directly
rather than doing anything with __kernel_standard) to use the
type-generic template machinery. This is intended as preparation for
adding llogb.
Tested for x86_64 and x86, and tested compile for other architectures
with build-many-glibcs.py.
* math/w_ilogb_template.c: New file. Based on math/w_ilogb.c.
* math/w_ilogb.c: Remove.
* math/w_ilogbf.c: Likewise.
* math/w_ilogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_ilogb.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_ilogbl.c: Likewise.
* math/Makefile (gen-libm-calls): Add w_ilogbF.
(libm-calls): Remove w_ilogbF.
* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h
(LDOUBLE_ilogbl_libm_version): New macro.
Building tests for IA64 runs into a build failure compiling
stdlib/tst-setcontext2.c:
tst-setcontext2.c: In function 'do_test':
tst-setcontext2.c:210:20: error: passing argument 1 of 'sigismember' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (sigismember (&oldctx.uc_sigmask, SIGUSR2) != 1)
^
Indeed, the IA64 uc_sigmask as unsigned long rather than the larger
userspace sigset_t. Fixing this might be hard; this patch works
around the build failure by making IA64 wrap the test with a version
that #defines sigismember to add a cast (I'd welcome a better approach
for fixing this).
Tested (compilation only) for ia64.
* sysdeps/unix/sysv/linux/ia64/tst-setcontext2.c: New file.
IA64 builds in math/ use "-include libm-symbols.h". This breaks the
signgam tests, which rely on undefining _LIBC and feature test macros
and defining _ISOMAC before including system headers to get them to
provide only ISO C declarations (libm-symbols.h ending up indirectly
including headers which result in this breaking); similarly, it breaks
C++ tests as some headers included from libm-symbols.h are not ready
for inclusion in C++ code. This patch disables the contents of
libm-symbols.h if __STRICT_ANSI__ or __cplusplus are defined to avoid
this problem (this header can only test symbols defined before the
source file is processed, so can't test _ISOMAC because that's defined
within the source file, after this header is included).
Tested (compilation only) for ia64.
* sysdeps/ia64/fpu/libm-symbols.h: Make contents conditional on
[!__STRICT_ANSI__ && !__cplusplus].
There is no need to use PLT nor GOT in static archives to branch to a
function, regardless whether static archives is compiled with PIC or
not. When static archives are used to create dynamic executable,
PLT/GOT may be used. The resulting executable still works correctly.
[BZ #20750]
* sysdeps/x86_64/sysdep.h (JUMPTARGET): Check SHARED instead
of PIC.
* sysdeps/unix/sysv/linux/fstatfs64.c: Reorder include files,
only alias fstatfs and __fstatfs if STATFS_IS_STATFS64 is non-zero.
* sysdeps/unix/sysv/linux/statfs64.c: Ditto for statfs and __statfs.
The nios2 sys/cachectl.h includes a kernel header asm/cachectl.h,
which does not exist, so causing the check-installed-headers tests to
fail. This patch removes the include of a nonexistent header.
Tested (compilation only) for nios2.
* sysdeps/unix/sysv/linux/nios2/sys/cachectl.h: Do not include
<asm/cachectl.h>.
Microsoft long ago added a mapping for 0x80 to the Euro sign to their
CP936. While GBK 1.0 doesn't include this mapping, it is compatible,
and Microsoft and glibc alias the two codepages. We could split them
apart so GBK wouldn't include the mapping, but that seems like a lot
of work for little gain.
This patch makes build-many-glibcs.py store information about builds
in JSON format. This is part of preparing it for use in a bot
checking for regressions.
The information stored is: time of last build (of host-libraries,
compilers or glibcs); versions of components used in the last build
(for compilers, host library versions are properly copied from those
used for the previous host-libraries build, and for glibcs, component
versions other than that of glibc are similarly copied from the last
compilers build); PASS/FAIL/UNRESOLVED results of the individual build
steps; a list of changed results; a list of tests (that are still run
at all) that have ever been recorded to PASS.
The first pieces of information are intended to be used by a bot to
decide whether a rebuild is appropriate (based on some combination of
elapsed time and changes to versions; a bot might want to rebuild
glibcs if there had been any change but only rebuild compilers after
enough time had elapsed, for example). All the information is
intended to be used in generating mails with results information.
This state is specifically for full builds (no individual configs for
building compilers or glibcs specified). If individual configs are
specified, build-time and build-versions information is cleared (since
it will no longer accurately reflect the install directory contents),
while the other information is left unchanged. This reflects the
motivation of providing information for a bot checking for
regressions; the contents of build-state.json in a tree used for
manual builds that may be only for some configurations are not
particularly important.
* scripts/build-many-glibcs.py: Import datetime module.
(Context.__init__): Load JSON build state. Initialize list of
status logs.
(Context.run_builds): Update saved build state.
(Context.add_makefile_cmdlist): Update list of status logs.
(Context.load_build_state_json): New function.
(Context.store_build_state_json): Likewise.
(Context.clear_last_build_state): Likewise.
(Context.update_build_state): Likewise.
(CommandList.status_logs): Likewise.
Updating build-many-glibcs.py may result in changes to the default
versions of components, or to the set of components (if e.g. Hurd
support is added and that requires a new component).
It's desirable for the checkout process to leave a source tree that is
ready to use. If the checkout updated the script itself, that means
it needs to be rerun to cause any new versions or components
referenced by the new script version to be properly checked out. This
patch makes the script check if it was modified by the checkout
process, and re-exec itself (with the same arguments) if so.
* scripts/build-many-glibcs.py (Context.__init__): Save text of
script being executed.
(Context.get_script_text): New function.
(Context.exec_self): Likewise.
(Context.checkout): Re-exec script if changed by checkout process.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.
The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.
Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayloadsig): New declaration.
* math/Versions (setpayloadsig): New libm symbol at version
GLIBC_2.25.
(setpayloadsigf): Likewise.
(setpayloadsigl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadsigF.
* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
(setpayloadsig_test_data): New array.
(setpayloadsig_test): New function.
(main): Call setpayloadsig_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
setpayloadsigf and setpayloadsigl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayloadsig.
(CFLAGS-nldbl-setpayloadsig.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch makes build-many-glibcs.py record the component versions
checked out, and whether those versions were explicitly requested or
defaults, in a file versions.json in the source directory.
The preferred version of a component is the first of: one explicitly
specified on the command line; one explicitly specified on the command
line in a previous run of build-many-glibcs.py; a default version for
that component. Thus, once you've run build-many-glibcs.py checkout
once with the updated script (making sure to specify the right
versions of any components previously checked out with a non-default
version), in future you can just run it without version specifiers and
it will know when a default-version component has changed its default
version and so should be checked out again.
Because you might have local changes and not want a default-version
component checkout replaced, you need to pass the --replace-sources
option to allow the script to delete and replace a component source
directory automatically; otherwise, it will give an error if a version
has changed. The script does not try to change branches of git or SVN
checkouts without checking out from scratch; if the version number
requested has changed and --replace-sources is used, the relevant
source directory will be removed completely and a new one checked out
from scratch.
Apart from allowing automatic updates of components with default
versions, this also facilitates bots reporting on the versions used in
a given build. versions.json contains not just information on the
version number and whether that was requested explicitly, but also git
or SVN revision information intended to be used in email reports from
bots.
* scripts/build-many-glibcs.py: Import json module.
(Context.__init__): Take replace_sources argument. Load
versions.json.
(Context.load_versions_json): New function.
(Context.store_json): Likewise.
(Context.store_versions_json): Likewise.
(Context.set_component_version): Likewise.
(Context.checkout): Update versions.json. Check for and handle
changes of version. Prefer previously explicitly specified
version to default version.
(Context.checkout_vcs): Return a revision identifier.
(Context.git_checkout): Likewise.
(Context.gcc_checkout): Likewise.
(get_parser): Add --replace-sources option.
(main): Pass replace_sources argument to Context call.
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
When glibc is compiled with gcc 6.2 that has been configured with
to default to PIC/PIE, the static version of __memcpy_chk is not built,
as the test is done on PIC instead of SHARED. Fix the test to check for
SHARED, like it is done for similar functions like memmove_chk.
Changelog:
* sysdeps/x86_64/memcpy_chk.S (__memcpy_chk): Check for SHARED
instead of PIC.
ISO C requires that the value of FP_ILOGB0 must be INT_MIN or
-INT_MAX. In sysdeps/sh/sh4/bits/mathdef.h, it's 0x80000001; that is,
a positive unsigned value that would be -INT_MAX if converted to int,
which is not valid (there's no actual constraint on the type, but
whatever the type the integer value must be one of the two permitted,
and types other than int don't really make sense). This patch makes
the ABI-compatible change to (-0x7fffffff).
(The testcase handles positive and negative sign separately to avoid
any issues with implicit conversions that could result in e.g. INT_MIN
converted to uintmax_t wrongly passing.)
Tested (compilation only) with build-many-glibcs.py.
[BZ #20859]
* sysdeps/sh/sh4/bits/mathdef.h (FP_ILOGB0): Define to
(-0x7fffffff) instead of 0x80000001.
* math/test-fp-ilogb-constants.c: New file.
* math/Makefile (tests): Add test-fp-ilogb-constants.
In a microMIPS compilation of `.init' code use the R_MICROMIPS_JALR
relocation intended for PIC call relaxation in microMIPS code rather
than the corresponding R_MIPS_JALR relocation meant for regular MIPS
code only.
* sysdeps/mips/mips32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n32/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
* sysdeps/mips/mips64/n64/crti.S (JALR_RELOC): New macro.
(_init): Use it in place of hardcoded R_MIPS_JALR.
Bug 20787 reports that, while float_t and double_t for 32-bit x86
properly respect -mfpmath=sse, for x86_64 they fail to reflect
-mfpmath=387, which is valid if unusual and results in FLT_EVAL_METHOD
being 2. This patch fixes the definitions to respect
__FLT_EVAL_METHOD__ in that case, arranging for the test that the
types correspond with FLT_EVAL_METHOD to be run with both -mfpmath=387
and -mfpmath=sse.
Note: this patch will also have the effect of making float_t and
double_t be long double for x86_64 with -mfpmath=sse+387, when
FLT_EVAL_METHOD is -1. It seems reasonable for x86_64 to be
consistent with 32-bit x86 in this case (and that definition is
conservatively safe, in that it makes the types correspond to the
widest evaluation format that might be used).
Tested for x86-64 and x86.
[BZ #20787]
* sysdeps/x86/bits/mathdef.h (float_t): Do not define to float if
[__x86_64__] when __FLT_EVAL_METHOD__ is nonzero.
(double_t): Do not define to double if [__x86_64__] when
__FLT_EVAL_METHOD__ is nonzero.
* sysdeps/x86/fpu/test-flt-eval-method-387.c: New file.
* sysdeps/x86/fpu/test-flt-eval-method-sse.c: Likewise.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-flt-eval-method-387 and test-flt-eval-method-sse.
[$(subdir) = math] (CFLAGS-test-flt-eval-method-387.c): New
variable.
[$(subdir) = math] (CFLAGS-test-flt-eval-method-sse.c): Likewise.
The default (top-level) version of bits/mathdef.h defines float_t to
double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of
which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11
requires a certain correspondence between these typedefs and
FLT_EVAL_METHOD values).
I proposed fixing this default in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no
objections from architecture maintainers, and this patch makes that
fix. As noted in the NEWS entry added, this might affect the ABIs of
non-glibc libraries (ImageMagick has been mentioned in gcc-patches
discussion of the S/390 case - which is unaffected by this patch), but
as noted in my previous message, affected libraries would have
problems with -mfpmath=sse anyway on 32-bit x86.
A (compilation) testcase is added to verify the required
correspondence of typedefs to FLT_EVAL_METHOD values. This test is
built with -fexcess-precision=standard to avoid any issues with GCC 7
on S/390 providing a more accurate FLT_EVAL_METHOD definition in the
default (no excess precision) mode. (This will also be usable to test
a fix for the recently reported bug about these typedefs on x86_64
-mfpmath=387, as architecture-specific tests can be added that
It is entirely possible that the fixed default makes some
architecture-specific versions of bits/mathdef.h semantically
equivalent to the default version and so no longer required. I don't
intend to investigate that separately from the refactoring I proposed
in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which
will create as few header variants as possible for each group of
definitions.
Tested (compilation only) with build-many-glibcs.py.
[BZ #20855]
* bits/mathdef.h (float_t): Define to float.
* math/test-flt-eval-method.c: New file.
* math/Makefile (tests): Add test-flt-eval-method.
(CFLAGS-test-flt-eval-method.c): New variable.
* sysdeps/unix/sysv/linux/fstatfs64.c: Hide prototypes for fstatfs
and __fstatfs. Make them aliases of __fstatfs64 if
STATFS_IS_STATFS64 is set to non-zero.
* sysdeps/unix/sysv/linux/statfs64.c: Ditto for __statfs, statfs,
and __statfs64.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fstatfs.c: Do not
define __fstatfs and fstatfs if STATFS_IS_STATFS64 is non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/statfs.c: Ditto
for __statfs and statfs.
* sysdeps/unix/sysv/linux/alpha/kernel_stat.h: Set STATFS_IS_STATFS64
to 0.
* sysdeps/unix/sysv/linux/generic/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/ia64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/s390/s390-64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/sparc/sparc64/kernel_stat.h: Ditto.
* sysdeps/unix/sysv/linux/x86_64/kernel_stat.h: Ditto.
