And shorten the section/node names a bit, so that the menu
entries become easier to read.
Texinfo 6.5 fails to process the previous structure:
./dynlink.texi:56: warning: node `Dynamic Linker Introspection' is
next for `Dynamic Linker Diagnostics' in sectioning but not in menu
./dynlink.texi:56: warning: node up `Dynamic Linker Diagnostics'
in menu `Dynamic Linker Invocation' and
in sectioning `Dynamic Linker' differ
./dynlink.texi:1: node `Dynamic Linker' lacks menu item for
`Dynamic Linker Diagnostics' despite being its Up target
./dynlink.texi:226: warning: node prev `Dynamic Linker Introspection' in menu `Dynamic Linker Invocation'
and in sectioning `Dynamic Linker Diagnostics' differ
Texinfo 7.0.2 does not report an error.
This fixes commit f21962ddfc
("manual: Document ld.so --list-diagnostics output").
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
XTheadBb has similar instructions like Zbb, which allow optimized
string processing:
* th.ff0: find-first zero is a CLZ instruction.
* th.tstnbz: Similar like orc.b, but with a bit-inverted result.
The instructions are documented here:
https://github.com/T-head-Semi/thead-extension-spec/tree/master/xtheadbb
These instructions can be found in the T-Head C906 and the C910.
Tested with the string tests.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code is generally unused in practice since there don't seem to be
any NSS modules that only implement _nss_MOD_gethostbyname2_r and not
_nss_MOD_gethostbyname3_r.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Returning a pidfd allows a process to keep a race-free handle for a
child process, otherwise, the caller will need to either use pidfd_open
(which still might be subject to TOCTOU) or keep the old racy interface
base on pid_t.
To correct use pifd_spawn, the kernel must support not only returning
the pidfd with clone/clone3 but also waitid (P_PIDFD) (added on Linux
5.4). If kernel does not support the waitid, pidfd return ENOSYS.
It avoids the need to racy workarounds, such as reading the procfs
fdinfo to get the pid to use along with other wait interfaces.
These interfaces are similar to the posix_spawn and posix_spawnp, with
the only difference being it returns a process file descriptor (int)
instead of a process ID (pid_t). Their prototypes are:
int pidfd_spawn (int *restrict pidfd,
const char *restrict file,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict],
char *const envp[restrict])
int pidfd_spawnp (int *restrict pidfd,
const char *restrict path,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict_arr],
char *const envp[restrict_arr]);
A new symbol is used instead of a posix_spawn extension to avoid
possible issues with language bindings that might track the return
argument lifetime. Although on Linux pid_t and int are interchangeable,
POSIX only states that pid_t should be a signed integer.
Both symbols reuse the posix_spawn posix_spawn_file_actions_t and
posix_spawnattr_t, to void rehash posix_spawn API or add a new one. It
also means that both interfaces support the same attribute and file
actions, and a new flag or file action on posix_spawn is also added
automatically for pidfd_spawn.
Also, using posix_spawn plumbing allows the reusing of most of the
current testing with some changes:
- waitid is used instead of waitpid since it is a more generic
interface.
- tst-posix_spawn-setsid.c is adapted to take into consideration that
the caller can check for session id directly. The test now spawns
itself and writes the session id as a file instead.
- tst-spawn3.c need to know where pidfd_spawn is used so it keeps an
extra file description unused.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
These functions allow to posix_spawn and posix_spawnp to use
CLONE_INTO_CGROUP with clone3, allowing the child process to
be created in a different cgroup version 2. These are GNU
extensions that are available only for Linux, and also only
for the architectures that implement clone3 wrapper
(HAVE_CLONE3_WRAPPER).
To create a process on a different cgroupv2, one can use the:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_SETCGROUP);
posix_spawnattr_setcgroup_np (&attr, cgroup);
posix_spawn (...)
Similar to other posix_spawn flags, POSIX_SPAWN_SETCGROUP control
whether the cgroup file descriptor will be used or not with
clone3.
There is no fallback if either clone3 does not support the flag
or if the architecture does not provide the clone3 wrapper, in
this case posix_spawn returns EOPNOTSUPP.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on mips64el-linux-gnueabihf, mips64el-n32-linux-gnu, and
mipsel-linux-gnu.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on arm-linux-gnueabihf.
The wiki page https://sourceware.org/glibc/wiki/Proposals/C.UTF-8
says that "Setting LC_ALL=C.UTF-8 will ignore LANGUAGE just like it
does with LC_ALL=C." This patch implements it.
* intl/dcigettext.c (guess_category_value): Treat C.<encoding> locale
like the C locale.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
In short: __tls_get_addr checks the global generation counter and if
the current dtv is older then _dl_update_slotinfo updates dtv up to the
generation of the accessed module. So if the global generation is newer
than generation of the module then __tls_get_addr keeps hitting the
slow dtv update path. The dtv update path includes a number of checks
to see if any update is needed and this already causes measurable tls
access slow down after dlopen.
It may be possible to detect up-to-date dtv faster. But if there are
many modules loaded (> TLS_SLOTINFO_SURPLUS) then this requires at
least walking the slotinfo list.
This patch tries to update the dtv to the global generation instead, so
after a dlopen the tls access slow path is only hit once. The modules
with larger generation than the accessed one were not necessarily
synchronized before, so additional synchronization is needed.
This patch uses acquire/release synchronization when accessing the
generation counter.
Note: in the x86_64 version of dl-tls.c the generation is only loaded
once, since relaxed mo is not faster than acquire mo load.
I have not benchmarked this. Tested by Adhemerval Zanella on aarch64,
powerpc, sparc, x86 who reported that it fixes the performance issue
of bug 19924.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The old Intel software developer manual specified that the low byte of
EAX of CPUID leaf 2 returned 1 which indicated the number of rounds of
CPUDID leaf 2 was needed to retrieve the complete cache information. The
newer Intel manual has been changed to that it should always return 1
and be ignored. If the lower byte isn't 1, CPUID leaf 2 can't be used.
In this case, we ignore CPUID leaf 2 and use CPUID leaf 4 instead. If
CPUID leaf 4 doesn't contain the cache information, cache information
isn't available at all. This addresses BZ #30643.
This patch makes build-many-glibcs.py use the new GMP 6.3.0 and MPFR
4.2.1 releases.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
Add common emojis to the translit-able characters (mostly
faces and hearts), and translit them to old-fashioned
smileys.
Signed-off-by: Colin Leroy-Mira <colin@colino.net>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Previously, if an entry was marked unusable for any reason, but had
not timed out yet, the assert would trigger.
One way to get into such state is if a data change is detected during
re-validation of an entry. This causes the entry to be marked as not
usable. If exits nscd soon after that, then the clock jumps
backwards, and nscd restarted, the cache re-validation run after
startup triggers the removed assert.
The change is more complicated than just the removal of the assert
because entries marked as not usable should be garbage-collected in
the second pass. To make this happen, it is necessary to update some
book-keeping data.
Reviewed-by: DJ Delorie <dj@redhat.com>
According to glibc memcmp microbenchmark test results(Add generic
memcmp), this implementation have performance improvement
except the length is less than 3, details as below:
Name Percent of time reduced
memcmp-lasx 16%-74%
memcmp-lsx 20%-50%
memcmp-aligned 5%-20%
According to glibc memset microbenchmark test results, for LSX and LASX
versions, A few cases with length less than 8 experience performace
degradation, overall, the LASX version could reduce the runtime about
15% - 75%, LSX version could reduce the runtime about 15%-50%.
The unaligned version uses unaligned memmory access to set data which
length is less than 64 and make address aligned with 8. For this part,
the performace is better than aligned version. Comparing with the generic
version, the performance is close when the length is larger than 128. When
the length is 8-128, the unaligned version could reduce the runtime about
30%-70%, the aligned version could reduce the runtime about 20%-50%.
According to glibc memrchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of rutime reduced
memrchr-lasx 20%-83%
memrchr-lsx 20%-64%
According to glibc memchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of runtime reduced
memchr-lasx 37%-83%
memchr-lsx 30%-66%
memchr-aligned 0%-15%
According to glibc rawmemchr microbenchmark, A few cases tested with
char '\0' experience performance degradation due to the lasx and lsx
versions don't handle the '\0' separately. Overall, rawmemchr-lasx
implementation could reduce the runtime about 40%-80%, rawmemchr-lsx
implementation could reduce the runtime about 40%-66%, rawmemchr-aligned
implementation could reduce the runtime about 20%-40%.
We are requiring Binutils >= 2.41, so explicit relocation syntax is
always supported by the assembler. Use it to reduce one instruction.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Even though the alloca usage is relatively small and fixed size the code
can be written without using alloca. Convert to local variables.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Convert to scratch_buffers to avoid potential stack overflow.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new macro, M68K_SCALE_AVAILABLE, similar to gmp
scale_available_p (mpn/m68k/m68k-defs.m4) that expand to 1 if a
scale factor can be used in addressing modes. This is used
instead of __mc68020__ for some optimization decisions.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
GCC currently does not define __mc68020__ for -mcpu=68040 or higher,
which memcpy/memmove assumptions. Since this memory copy optimization
seems only intended for m68020, disable for other m680X0 variants.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
Parts of elf/tst-rtld-list-diagnostics.py have been copied from
scripts/tst-ld-trace.py.
The abnf module is entirely optional and used to verify the
ABNF grammar as included in the manual.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Based on the glibc microbenchmark, only a few short inputs with this
strncmp-aligned and strncmp-lsx implementation experience performance
degradation, overall, strncmp-aligned could reduce the runtime 0%-10%
for aligned comparision, 10%-25% for unaligend comparision, strncmp-lsx
could reduce the runtime about 0%-60%.
Based on the glibc microbenchmark, strcmp-aligned implementation could
reduce the runtime 0%-10% for aligned comparison, 10%-20% for unaligned
comparison, strcmp-lsx implemenation could reduce the runtime 0%-50%.
Based on the glibc microbenchmark, strnlen-aligned implementation could
reduce the runtime more than 10%, strnlen-lsx implementation could reduce
the runtime about 50%-78%, strnlen-lasx implementation could reduce the
runtime about 50%-88%.
