Replacing incorrect abbreviated weekday names "Пнд", "Вто", "Срд"...
with correct ones "Пн", "Вт", "Ср"... makes the LC_TIME sections in
those two locales almost identical. The only remaining difference
was that ab_alt_mon elements in ru_UA were lowercase while in ru_RU
they had the first letter uppercase, the latter was pointed as
a better choice by a native speaker. This commit unifies LC_TIME
between ru_RU and ru_UA.
It adds the missing Implies for armv7, armv6, armv6t2 after the
commit 1673ba87fe. Without the Implies a build with the
compiler targeting the aforementioned architecture does not select
the arch-specific optimization including the ifunc selectors.
I checked with a build against armv5, armv6, armv6t2, armv7, and
armv7-neon for both LE and BE. For armv6 and armv7 I also checked
that both sysdeps selection and the resulting implementation built
is the expected ones.
Similarly to what was done for regular character scanning functions,
this patch uses the new mode mask, SCANF_LDBL_USES_FLOAT128, in the
'mode' argument of the wide characters scanning function,
__vfwscanf_internal (which is also extended to support scanning
floating-point values with IEEE binary128, by redirecting calls to
__wcstold_internal to __wcstof128_internal).
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The 'mode' argument to __vfscanf_internal allows the selection of the
long double format for all long double arguments requested by the format
string. Currently, there are two possibilities: long double with the
same format as double or long double as something else. The 'something
else' format varies between architectures, and on powerpc64le, it means
IBM Extended Precision format.
In preparation for the third option of long double format on
powerpc64le, this patch uses the new mode mask,
SCANF_LDBL_USES_FLOAT128, which tells __vfscanf_internal to call
__strtof128_internal, instead of __strtold_internal, and save the output
into a _Float128 variable.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The format string can request positional parameters, instead of relying
on the order in which they appear as arguments. Since this has an
effect on how the type of each argument is determined, this patch
extends the test cases to use positional parameters with mixed double
and long double types, to verify that the IEEE long double
implementations of *printf work correctly in this scenario.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
A single format string can take double and long double parameters at the
same time. Internally, these parameters are routed to the same
function, which correctly reads them and calls the underlying functions
responsible for the actual conversion to string. This patch adds a new
case to test this scenario.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what was done for the regular character, fortified printing
functions, this patch combines the mode masks PRINTF_LDBL_USES_FLOAT128
and PRINTF_FORTIFY to provide wide character versions of fortified
printf functions. It also adds two flavors of test cases: one that
explicitly calls the fortified functions, and another that reuses the
non-fortified test, but defining _FORTIFY_SOURCE as 2. The first
guarantees that the implementations are actually being tested
(independently of what's in bits/wchar2.h), whereas the second
guarantees that the redirections calls the correct function in the IBM
and IEEE long double cases.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Since the introduction of internal functions with explicit flags for the
printf family of functions, the 'mode' parameter can be used to select
which format long double parameters have (with the mode flags:
PRINTF_LDBL_IS_DBL and PRINTF_LDBL_USES_FLOAT128), as well as to select
whether to check for overflows (mode flag: PRINTF_FORTIFY).
This patch combines PRINTF_LDBL_USES_FLOAT128 and PRINTF_FORTIFY to
provide the IEEE binary128 version of printf-like function for platforms
where long double can take this format, in addition to the double format
and to some non-ieee format (currently, this means powerpc64le).
There are two flavors of test cases provided with this patch: one that
explicitly calls the fortified functions, for instance __asprintf_chk,
and another that reuses the non-fortified test, but defining
_FORTIFY_SOURCE as 2. The first guarantees that the implementations are
actually being tested (in bits/stdio2.h, vprintf gets redirected to
__vfprintf_chk, which would leave __vprintf_chk untested), whereas the
second guarantees that the redirections calls the correct function in
the IBM and IEEE long double cases.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what was done for regular character printing functions,
this patch uses the new mode mask, PRINTF_LDBL_USES_FLOAT128, in the
'mode' argument of the wide characters printing function,
__vfwprintf_internal (which is also extended to support printing
floating-point values with IEEE binary128, by saving floating-point
values into variables of type __float128 and adjusting the parameters to
__printf_fp and __printf_fphex as if it was a call from a wide-character
version of strfromf128 (even though such version does not exist)).
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The 'mode' argument to __vfprintf_internal allows the selection of the
long double format for all long double arguments requested by the format
string. Currently, there are two possibilities: long double with the
same format as double or long double as something else. The 'something
else' format varies between architectures, and on powerpc64le, it means
IBM Extended Precision format.
In preparation for the third option of long double format on
powerpc64le, this patch uses the new mode mask,
PRINTF_LDBL_USES_FLOAT128, which tells __vfprintf_internal to save the
floating-point values into variables of type __float128 and adjusts the
parameters to __printf_fp and __printf_fphex as if it was a call from
strfromf128.
Many files from the stdio-common, wcsmbs, argp, misc, and libio
directories will have IEEE binary128 counterparts. Setting the correct
compiler options to these files (original and counterparts) would
produce a large amount of repetitive Makefile rules. To avoid this
repetition, this patch adds a Makefile routine that iterates over the
files adding or removing the appropriate flags.
Tested for powerpc64le.
Reviewed-By: Florian Weimer <fweimer@redhat.com>
Reviewed-By: Joseph Myers <joseph@codesourcery.com>
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
When the commit
commit 03992356e6
Author: Zack Weinberg <zackw@panix.com>
Date: Sat Feb 10 11:58:35 2018 -0500
Use C99-compliant scanf under _GNU_SOURCE with modern compilers.
added the DEPRECATED_SCANF macro to select when redirections of *scanf
functions to their ISO C99 compliant versions should happen, it
accidentally missed doing it for vfwscanf, vwscanf, and vswscanf.
Tested for powerpc64le and with build-many-glibcs (i686-linux-gnu and
nios2-linux-gnu are failing with current master, and with this patch,
but I didn't see a regression).
Change-Id: I706b344a3fb50be017cdab9251d9da18a3ba8c60
The generic pselect implementation has the very specific race condition
that motived the creation of the pselect syscall (no atomicity in
signal mask set/reset). Using it as generic implementation is
counterproductive Also currently only microblaze uses it as fallback
when used on kernel prior 3.15.
This patch moves the generic implementation to a microblaze specific
one, sets the generic internal as a ENOSYS, and cleanups the Linux
generic implementation.
The microblaze implementation mimics the previous Linux generic one,
where it either uses pselect6 directly if __ASSUME_PSELECT or a
first try pselect6 then the fallback otherwise.
Checked on x86_64-linux-gnu and microblaze-linux-gnu.
Very recent commit 854e91bf6b enabled
inline of issignalingf() in general (__issignalingf in include/math.h).
There is another implementation for an inline use of issignalingf
(issignalingf_inline in sysdeps/ieee754/flt-32/math_config.h)
which could instead make use of the new enablement.
Replace the use of issignalingf_inline with __issignaling. Using
issignaling (instead of __issignalingf) will allow future enhancements
to the type-generic implementation, issignaling, to be automatically
adopted.
The implementations are slightly different, and compile to slightly
different code, but I measured no significant performance difference.
The second implementation was brought to my attention by:
Suggested-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This causes issues when using clang with -frewrite-includes to e.g.,
submit the translation unit to a distributed compiler.
In my case, I was building Firefox using sccache.
See [1] for a reduced test-case since I initially thought this was a
clang bug, and [2] for more context.
Apparently doing this is invalid C++ per [cpp.cond], which mentions [3]:
> The #ifdef and #ifndef directives, and the defined conditional
> inclusion operator, shall treat __has_include and __has_cpp_attribute
> as if they were the names of defined macros. The identifiers
> __has_include and __has_cpp_attribute shall not appear in any context
> not mentioned in this subclause.
[1]: https://bugs.llvm.org/show_bug.cgi?id=43982
[2]: https://bugs.llvm.org/show_bug.cgi?id=37990
[3]: http://eel.is/c++draft/cpp.cond#7.sentence-2
Change-Id: Id4b8ee19176a9e4624b533087ba870c418f27e60
issignalingf is a very small function used in some areas where
better performance (and smaller code) might be helpful.
Create inline implementation for issignalingf.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This will allow changes in dependency processing during non-lazy
binding, for more precise processing of NODELETE objects: During
initial relocation in dlopen, the fate of NODELETE objects is still
unclear, so objects which are depended upon by NODELETE objects
cannot immediately be marked as NODELETE.
Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
In some cases, it is necessary to introduce noexcept regions
where raised dynamic loader exceptions (e.g., from lazy binding)
are fatal, despite being nested in a code region with an active
exception handler. This change enhances _dl_catch_exception with
to provide such a capability. The existing function is reused,
so that it is not necessary to introduce yet another function with
a similar purpose.
Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
The trampoline code should really be rewritten in assembler because
this is all very undefined at the C level.
Change-Id: Ided58244ca0ee48892519faac5ac222a4e02dec4
l_audit ends up as an internal array with _rtld_global, and GCC 10
warns about this.
This commit does not change the layout of _rtld_global, so it is
suitable for backporting. Future changes could allocate more of the
audit state dynamically and remove it from always-allocated data
structures, to optimize the common case of inactive auditing.
Change-Id: Ic911100730f9124d4ea977ead8e13cee64b84d45
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
libio can only deal with gconv conversions which consist of a single
step. Not using __gconv_info simplifies the data structures somewhat.
This eliminates a new GCC 10 warning about subscribing an inner
zero-length array.
Tested on x86_64-linux-gnu with mainline GCC. Built with
build-many-glibcs.py, also with mainline GCC. Due to GCC PR 92039,
there are failures left on 32-bit architectures with float128 support.
Change-Id: I8b4c489b619a53154712ff32e1b6f13bb92d4203
Add a script for visualizing the JSON output generated by existing
glibc string microbenchmarks.
Overview:
plot_strings.py is capable of plotting benchmark results in the
following formats, which are controlled with the -p or --plot argument:
1. absolute timings (-p time): plot the timings as they are in the
input benchmark results file.
2. relative timings (-p rel): plot relative timing difference with
respect to a chosen ifunc (controlled with -b argument).
3. performance relative to max (-p max): for each varied parameter
value, plot 1/timing as the percentage of the maximum value out of
the plotted ifuncs.
4. throughput (-p thru): plot varied parameter value over timing
For all types of graphs, there is an option to explicitly specify
the subset of ifuncs to plot using the --ifuncs parameter.
For plot types 1. and 4. one can hide/expose exact benchmark figures
using the --values flag.
When plotting relative timing differences between ifuncs, the first
ifunc listed in the input JSON file is the baseline, unless the
baseline implementation is explicitly chosen with the --baseline
parameter. For the ease of reading, the script marks the statistically
insignificant range on the graphs. The default is +-5% but this
value can be controlled with the --threshold parameter.
To accommodate for the heterogeneity in benchmark results files,
one can control i.e the x-axis scale, the resolution (dpi) of the
generated figures or the key to access the varied parameter value
in the JSON file. The corresponding options are --logarithmic,
--resolution or --key. The --key parameter ensures that plot_strings.py
works with all files which pass JSON schema validation. The schema
can be chosen with the --schema parameter.
If a window manager is available, one can enable interactive
figure display using the --display flag.
Finally, one can use the --grid flag to enable grid lines in the
generated figures.
Implementation:
plot_strings.py traverses the JSON tree until a 'results' array
is found and generates a separate figure for each such array.
The figure is then saved to a file in one of the available formats
(controlled with the --extension parameter).
As the tree is traversed, the recursive function tracks the metadata
about the test being run, so that each figure has a unique and
meaningful title and filename.
While plot_strings.py works with existing benchmarks, provisions
have been made to allow adding more structure and metadata to these
benchmarks. Currently, many benchmarks produce multiple timing values
for the same value of the varied parameter (typically 'length').
Mutiple data points for the same parameter usually mean that some other
parameter was varied as well, for example, if memmove's src and dst
buffers overlap or not (see bench-memmove-walk.c and
bench-memmove-walk.out).
Unfortunately, this information is not exposed in the benchmark output
file, so plot_strings.py has to resort to computing the geometric mean
of these multiple values. In the process, useful information about the
benchmark configuration is lost. Also, averaging the timings for
different alignments can hide useful characterstics of the benchmarked
ifuncs.
Testing:
plot_strings.py has been tested on all existing string microbenchmarks
which produce results in JSON format. The script was tested on both
Windows 10 and Ubuntu 16.04.2 LTS. It runs on both python 2 and 3
(2.7.12 and 3.5.12 tested).
Useful commands:
1. Plot timings for all ifuncs in bench-strlen.out:
$ ./plot_strings.py bench-strlen.out
2. Display help:
$ ./plot_strings.py -h
3. Plot throughput for __memset_avx512_unaligned_erms and
__memset_avx512_unaligned. Save the generated figure in pdf format to
'results/'. Use logarithmic x-axis scale, show grid lines and expose
the performance numbers:
$ ./plot_strings.py bench.out -o results/ -lgv -e pdf -p thru \
-i __memset_avx512_unaligned_erms __memset_avx512_unaligned
4. Plot relative timings for all ifuncs in bench.out with __generic_memset
as baseline. Display percentage difference threshold of +-10%:
$ ./plot_strings.py bench.out -p rel -b __generic_memset -t 10
Discussion:
1. I would like to propose relaxing the benchout_strings.schema.json
to allow specifying either a 'results' array with 'timings' (as before)
or a 'variants' array. See below example:
{
"timing_type": "hp_timing",
"functions": {
"memcpy": {
"bench-variant": "default",
"ifuncs": ["generic_memcpy", "__memcpy_thunderx"],
"variants": [
{
"name": "powers of 2",
"variants": [
{
"name": "both aligned",
"results": [
{
"length": 1,
"align1": 0,
"align2": 0,
"timings": [x, y]
},
{
"length": 2,
"align1": 0,
"align2": 0,
"timings": [x, y]
},
...
{
"length": 65536,
"align1": 0,
"align2": 0,
"timings": [x, y]
}]
},
{
"name": "dst misaligned",
"results": [
{
"length": 1,
"align1": 0,
"align2": 0,
"timings": [x, y]
},
{
"length": 2,
"align1": 0,
"align2": 1,
"timings": [x, y]
},
...
'variants' array consists of objects such that each object has a 'name'
attribute to describe the configuration of a particular test in the
benchmark. This can be a description, for example, of how the parameter
was varied or what was the buffer alignment tested. The 'name' attribute
is then followed by another 'variants' array or a 'results' array.
The nesting of variants allows arbitrary grouping of benchmark timings,
while allowing description of these groups. Using recusion, it is
possible to proceduraly create titles and filenames for the figures being
generated.
PTHREAD_STACK_MIN comes from <limits.h>, so include it explicitly.
However, it is not defined on Hurd, so compensate for that as well.
Built on x86_64-linux-gnu, i686-linux-gnu, i686-gnu.
Change-Id: Ifacc888ef86731c2639721b0932ae59583bd6b3e
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This reduces the possible error scenarios considerably because
no longer can file seek fail, leaving the file descriptor in an
inconsistent state and out of sync with the cache.
As a result, it is possible to avoid setting file_offset to -1
to make an error persistent. Instead, subsequent calls will retry
the operation and report any errors returned by the kernel.
This change also avoids reading the file from the start if pututline
is called multiple times, to work around lock acquisition failures
due to timeouts.
Change-Id: If21ea0c162c38830a89331ea93cddec14c0974de
Only one of the currently defined flags is incompatible with versioned
symbol lookups, so it makes sense to check for that flag and not its
complement.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Change-Id: I3384349cef90cfd91862ebc34a4053f0c0a99404
Increase the upper bound on medium cases from 96 to 128 bytes.
Now, up to 128 bytes are copied unrolled.
Increase the upper bound on small cases from 16 to 32 bytes so that
copies of 17-32 bytes are not impacted by the larger medium case.
Benchmarking:
The attached figures show relative timing difference with respect
to 'memcpy_generic', which is the existing implementation.
'memcpy_med_128' denotes the the version of memcpy_generic with
only the medium case enlarged. The 'memcpy_med_128_small_32' numbers
are for the version of memcpy_generic submitted in this patch, which
has both medium and small cases enlarged. The figures were generated
using the script from:
https://www.sourceware.org/ml/libc-alpha/2019-10/msg00563.html
Depending on the platform, the performance improvement in the
bench-memcpy-random.c benchmark ranges from 6% to 20% between
the original and final version of memcpy.S
Tested against GLIBC testsuite and randomized tests.
This simplifies internal_getut_nolock and fixes a regression,
introduced in commit be6b16d975
("login: Acquire write lock early in pututline [BZ #24882]")
in pututxline because __utmp_equal can only compare process-related
utmp entries.
Fixes: be6b16d975
Change-Id: Ib8a85002f7f87ee41590846d16d7e52bdb82f5a5
GCC 10 will warn about subscribing inner length zero arrays. Use a GCC
extension in csu/libc-tls.c to allocate space for the static_slotinfo
variable. Adjust nptl_db so that the type description machinery does
not attempt to determine the size of the flexible array member slotinfo.
Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
This patch fixes the time64 support (added by 2e44b10b42) where it
misses the remaining argument updated if __NR_clock_nanosleep
returns EINTR.
Checked on i686-linux-gnu on 4.15 kernel (no time64 support) and
on 5.3 kernel (with time64 support).
Reviewed-by: Alistair Francis <alistair23@gmail.com>
C2X adds the asctime_r, ctime_r, gmtime_r and localtime_r functions.
This patch duly adds __GLIBC_USE (ISOC2X) to the conditions under
which <time.h> declares them.
Tested for x86_64.
This patch provides new __ppoll64 explicit 64 bit function for handling polling
events (with struct timespec specified timeout) for a set of file descriptors.
Moreover, a 32 bit version - __ppoll has been refactored to internally use
__ppoll64.
The __ppoll is now supposed to be used on systems still supporting 32 bit time
(__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct
__timespec64.
The new ppoll_time64 syscall available from Linux 5.1+ has been used, when
applicable.
The Linux kernel checks if passed tv_nsec value overflows, so there is no need
to repeat it in the glibc.
When ppoll syscall on systems supporting 32 bit time ABI is used, the check is
performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\
make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with ppoll_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports ppoll_time64
syscall.
- Linux v4.19 (no ppoll_time64 support) with default minimal kernel version for
contemporary glibc
This kernel doesn't support ppoll_time64 syscall, so the fallback to ppoll is
tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
And related tests. These tests create a thread for each core, so
they may fail due to address space limitations with the default
stack size.
Change-Id: Ieef44a7731f58d3b7d6638cce4ccd31126647551
If the regex has more subexpressions than the number of elements allocated
in the regmatch_t array passed to regexec then proceed_next_node may
access the regmatch_t array outside its bounds.
No testcase added because even without this bug it would then crash in
pop_fail_stack which is bug 11053.
The clock_nanosleep syscall is not supported on newer 32-bit platforms (such
as RV32). To fix this issue let's use clock_nanosleep_time64 if it is
avaliable.
It just contains duplicated defitions provided by other generic
nptl headers.
Checked with run-built-tests=no against hppa-linux-gnu.
Change-Id: I95f55d5b7b7ae528c81cd2394d57ce92398189bf
It has been reported that due to lack of fairness in POSIX file
locking, the current reader-to-writer lock upgrade can result in
lack of forward progress. Acquiring the write lock directly
hopefully avoids this issue if there are only writers.
This also fixes bug 24882 due to the cache revalidation in
__libc_pututline.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Change-Id: I57e31ae30719e609a53505a0924dda101d46372e
Adds the __libpthread_version_placeholder symbol with the same version
of nanosleep/__nanosleep that was removed by 79a547b162 and that
is not provided by other symbols.
Since l_whence is the second member of struct flock, it is written
twice. The double-assignment is technically undefined behavior due to
the lack of a sequence point.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Change-Id: I2baf9e70690e723c61051b25ccbd510aec15976c
