[BZ #15215] This unifies various pthread_once architecture-specific
implementations which were using the same algorithm with slightly different
implementations. It also adds missing memory barriers that are required for
correctness.
This patch saves and restores bound registers in symbol lookup for x86-64:
1. Branches without BND prefix clear bound registers.
2. x86-64 pass bounds in bound registers as specified in MPX psABI
extension on hjl/mpx/master branch at
https://github.com/hjl-tools/x86-64-psABIhttps://groups.google.com/forum/#!topic/x86-64-abi/KFsB0XTgWYc
Binutils has been updated to create an alternate PLT to add BND prefix
when branching to ld.so.
* config.h.in (HAVE_MPX_SUPPORT): New #undef.
* sysdeps/x86_64/configure.ac: Set HAVE_MPX_SUPPORT.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S (REGISTER_SAVE_AREA): New
macro.
(REGISTER_SAVE_RAX): Likewise.
(REGISTER_SAVE_RCX): Likewise.
(REGISTER_SAVE_RDX): Likewise.
(REGISTER_SAVE_RSI): Likewise.
(REGISTER_SAVE_RDI): Likewise.
(REGISTER_SAVE_R8): Likewise.
(REGISTER_SAVE_R9): Likewise.
(REGISTER_SAVE_BND0): Likewise.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND2): Likewise.
(_dl_runtime_resolve): Use them. Save and restore Intel MPX
bound registers when calling _dl_fixup.
pathconf(_PC_NAME_MAX) was implemented on top of statfs(). The 32bit
version therefore fails EOVERFLOW if the filesystem blockcount is
sufficiently large.
Most pathconf() queries use statvfs64(), which avoids this issue. This
patch modifies pathconf(_PC_NAME_MAX) to do likewise.
This patch moves the __PTHREAD_SPINS definition to arch specific header
since pthread_mutex_t layout is also arch specific. This leads to no
need to defining __PTHREAD_MUTEX_HAVE_ELISION and thus removing of the
undefined compiler warning.
This patch fixes some powerpc32 and powerpc64 builds with
--disable-multi-arch option along with different --with-cpu=powerN.
It cleanups the Implies directories by removing the multiarch
folder for non multiarch config and also fixing two assembly
implementations: powerpc64/power7/strncat.S that is calling the
wrong strlen; and power8/fpu/s_isnan.S that misses the hidden_def and
weak_alias directives.
This patch makes the configure adds -D_CALL_ELF=1 when compiler does
not define _CALL_ELF (versions before powerpc64le support). It cleans
up compiler warnings on old compiler where _CALL_ELF is not defined
on powerpc64(be) builds.
It does by add a new config.make variable for configure-deduced
CPPFLAGS and accumulate into that (confix-extra-cppflags). It also
generalizes libc_extra_cflags so it accumulates in sysdeps configure
fragmenets.
This patch fixes the powerpc32 optimized nearbyint/nearbyintf bogus
results for FE_DOWNWARD rounding mode. This is due wrong instructions
sequence used in the rounding calculation (two subtractions instead of
adition and a subtraction).
Fixes BZ#16815.
This patch fixes incorrect results from catan and catanh of certain
special inputs in round-downward mode (bug 16799), and incorrect
results of __ieee754_logf (+/-0) in round-downward mode (bug 16800)
that show up through catan/catanh when tested in all rounding modes,
but not directly in the testing for logf because the bug gets hidden
by the wrappers.
Both bugs involve a zero that should be +0 being -0 instead: one
computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in
the logf case. The fixes ensure positive zero is used. Testing of
catan and catanh in all rounding modes is duly enabled.
I expect there are various other bugs in special cases in __ieee754_*
functions that are normally hidden by the wrappers but would show up
for testing with -lieee (or in future with -fno-math-errno if we
replace -lieee and _LIB_VERSION with compile-time redirection to new
*_noerrno symbol names).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16799]
[BZ #16800]
* math/s_catan.c (__catan): Avoid passing -0 denominator to atan2
with 0 numerator.
* math/s_catanf.c (__catanf): Likewise.
* math/s_catanh.c (__catanh): Likewise.
* math/s_catanhf.c (__catanhf): Likewise.
* math/s_catanhl.c (__catanhl): Likewise.
* math/s_catanl.c (__catanl): Likewise.
* sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide
by positive zero when computing -Inf result.
* math/libm-test.inc (catan_test): Use ALL_RM_TEST.
(catanh_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16789, incorrect sign of (real part) zero result
from clog and clog10 in round-downward mode, arising from that real
part being computed as 0 - 0. To ensure that an underflow exception
occurred, the code used an underflowing value (the next term in the
series for log1p) in arithmetic computing the real part of the result,
yielding the problematic 0 - 0 computation in some cases even when the
mathematical result would be small but positive. The patch changes
this code to use the math_force_eval approach to ensuring that an
underflowing computation actually occurs. Tests of clog and clog10
are enabled in all rounding modes.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16789]
* math/s_clog.c (__clog): Use math_force_eval to ensure underflow
instead of using underflowing value in computing result.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/libm-test.inc (clog_test): Use ALL_RM_TEST.
(clog10_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Fix for values near a power of two, and some tidies.
[BZ #16739]
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Correct
output when value is near a power of two. Use int64_t for lx and
remove casts. Use decimal rather than hex exponent constants.
Don't use long double multiplication when double will suffice.
* math/libm-test.inc (nextafter_test_data): Add tests.
* NEWS: Add 16739 and 16786 to bug list.
This patch continues fixing __ASSUME_* issues in preparation for
moving to a 2.6.32 minimum kernel version by addressing assumptions on
robust mutex and PI futex support availability. Those assumptions are
bug 9894, but to be clear this patch does not address all the issues
from that bug about wrong version assumptions, only those still
applicable for --enable-kernel=2.6.32 or later (with the expectation
that the move to that minimum kernel will obsolete the other parts of
the bug). The patch is independent of
<https://sourceware.org/ml/libc-alpha/2014-03/msg00585.html>, my other
pending-review patch preparing for the kernel version change; the two
together complete all the changes I believe are needed in preparation
regarding any macro in sysdeps/unix/sysv/linux/kernel-features.h that
would be affected by such a change. (I have not checked the
correctness of macros whose conditions are unaffected by such a
change, or macros only defined in other kernel-features.h files.)
As discussed in that bug, robust mutexes and PI futexes need
futex_atomic_cmpxchg_inatomic to be implemented, in addition to
certain syscalls needed for robust mutexes (and
architecture-independent kernel pieces for all the features in
question). That is, as I understand it, they need
futex_atomic_cmpxchg_inatomic to *work* (not return an ENOSYS error).
The issues identified in my analysis relate to ARM, M68K, MicroBlaze,
MIPS and SPARC.
On ARM, whether futex_atomic_cmpxchg_inatomic works depends on the
kernel configuration. As of 3.13, the condition for *not* working is
CONFIG_CPU_USE_DOMAINS && CONFIG_SMP. As of 2.6.32 it was simply
CONFIG_SMP that meant the feature was not implemented. I don't know
if there are any circumstances in which we can say "we can assume a
userspace glibc binary built with these options will never run on a
kernel with the problematic configuration", but at least for now I'm
just undefining the relevant __ASSUME_* macros for ARM.
On M68K, two of the three macros are undefined for kernels before
3.10, but as far as I can see __ASSUME_FUTEX_LOCK_PI is in the same
group needing futex_atomic_cmpxchg_inatomic support and so should be
undefined as well.
On MicroBlaze the required support was added in 2.6.33.
On MIPS, the support depends on cpu_has_llsc in the kernel - that is,
actual hardware LL/SC support (GCC and glibc for MIPS GNU/Linux rely
on the instructions being supported in some way, but it may be kernel
emulation; futex_atomic_cmpxchg_inatomic doesn't work with that
emulation). The same condition as in GCC for indicating LL/SC support
may not be available is used for undefining the macros in glibc,
__mips == 1 || defined _MIPS_ARCH_R5900. (Maybe we could in fact
desupport MIPS processors without the hardware support in glibc.)
On SPARC, 32-bit kernels don't support futex_atomic_cmpxchg_inatomic;
__arch64__ || __sparc_v9__ is used as the condition for binaries that
won't run on 32-bit kernels.
This patch is not tested beyond the sanity check of an x86_64 build.
[BZ #9894]
* sysdeps/unix/sysv/linux/kernel-features.h
[__sparc__ && !__arch64__ && !__sparc_v9__]
(__ASSUME_SET_ROBUST_LIST): Do not define.
[__sparc__ && !__arch64__ && !__sparc_v9__]
(__ASSUME_FUTEX_LOCK_PI): Likewise.
[__sparc__ && !__arch64__ && !__sparc_v9__] (__ASSUME_REQUEUE_PI):
Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Undefine.
(__ASSUME_REQUEUE_PI): Likewise.
(__ASSUME_SET_ROBUST_LIST): Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x030a00] (__ASSUME_FUTEX_LOCK_PI):
Undefine.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_FUTEX_LOCK_PI):
Likewise.
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_REQUEUE_PI):
Likewise.
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_SET_ROBUST_LIST):
Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__mips == 1 || _MIPS_ARCH_R5900] (__ASSUME_FUTEX_LOCK_PI):
Undefine.
[__mips == 1 || _MIPS_ARCH_R5900] (__ASSUME_REQUEUE_PI): Likewise.
[__mips == 1 || _MIPS_ARCH_R5900] (__ASSUME_SET_ROBUST_LIST):
Likewise.
Continuing the fixes for __ASSUME_* issues in preparation for moving
to a 2.6.32 minimum kernel version, this *untested* patch fixes bug
16648, the definition of __ASSUME_ATFCTS meaning that the futimesat
syscall is assumed for all MicroBlaze kernels despite not being
present until 2.6.33.
__ASSUME_ATFCTS controls conditionals relating to a lot of different
syscalls in Linux-specific code (fstatat64 faccessat fchmodat fchownat
futimesat newfstatat linkat mkdirat openat readlinkat renameat
symlinkat unlinkat mknodat), where whether newfstatat fstatat64
futimesat are used depends on the architecture, as well as controlling
whether openat64_not_cancel_3 is expected to work in
sysdeps/posix/getcwd.c. The assumptions are all OK as of 2.6.32
except for this MicroBlaze case, and it's generally desirable to get
rid of as many of the __ASSUME_ATFCTS conditionals as possible, to
simplify the code (the fallbacks include potential unbounded dynamic
stack allocations). Thus, rather than the simplest approach of
undefining __ASSUME_ATFCTS for older kernels on MicroBlaze, this patch
takes the approach of using the linux-generic implementation of
futimesat for MicroBlaze kernels before 2.6.33 (all such kernels have
the utimensat syscall).
[BZ #16648]
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_FUTIMESAT): Define.
* sysdeps/unix/sysv/linux/microblaze/futimesat.c: New file.
This patch fixes bug 16348, spurious underflows from x86/x86_64 expl
on arguments close to 0. These implementations effectively use expm1
(on the fractional part of the argument) internally, so resulting in
spurious underflows when the result is very close to 1. For arguments
small enough that the round-to-nearest correct result is 1, this patch
uses 1+x instead.
These implementations are also used for exp10l and so the patch fixes
similar issues there (the 0x1p-67 threshold being small enough to be
correct for exp10l as well as expl). But because of spurious
underflows in other exp10 implementations (bug 16560), the tests
aren't added for exp10 at this point - they can be added when the
other exp10 parts of that bug are fixed.
Tested x86_64 and x86; no ulps updates needed.
[BZ #16348]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use
1+x for argument with exponent below -67.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
Bug 16198 is x86_64 fegetenv wrongly masking exceptions for which
traps are enabled, because that's a side-effect of the fnstenv
instruction. This patch fixes it to use fldenv immediately after
fnstenv, like the i386 version. Tested x86_64 and x86.
[BZ #16198]
* sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Use fldenv after
fnstenv.
* math/test-fenv-preserve.c: New file.
* math/Makefile (tests): Add test-fenv-preserve.
gen-auto-libm-tests presently allows but does not require underflow
exceptions for results with magnitude in the range (greatest
subnormal, least normal].
In some cases, the magnitude of the exact result is very slightly
above the least normal, but rounding in the implementation results in
it effectively computing an infinite-precision result that is slightly
below the least normal, so raising an underflow exception. This is in
accordance with the documented accuracy goals, but results in
testsuite failures.
This patch changes the logic to allow underflows when the mathematical
result is up to 0.5ulp above the least normal (so in any case where
the round-to-nearest result is the least normal). Ideally underflows
in all these cases would be accepted only when an underflow with the
actual result is consistent with the rounding mode (in FE_TOWARDZERO
mode, a return value of the least normal implies that the
infinite-precision result did not underflow so there should be no
underflow exception, for example), so as to match the documented goals
more precisely - whereas at present the tests for exceptions are
completely independent of the tests of the returned values. (The same
applies to overflow exceptions as well - they too should be checked
for consistency with the result, as in FE_TOWARDZERO mode a result
1ulp below the largest finite value should be inconsistent with an
overflow exception and cause a failure with overflow rather than
simply being considered a 1ulp error when overflow is expected.) But
the present patch at least deals with the cases causing spurious
failures so that (a) certain existing tests no longer need to be
marked as having spurious exceptions (such markings in
auto-libm-test-in end up applying to more cases than just those they
are needed for) and (b) log1p can be tested in all rounding modes
without introducing more such failures. This patch duly moves tests
of log1p to ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16357]
[BZ #16599]
* math/gen-auto-libm-tests.c (fp_format_desc): Add field
min_plus_half.
(fp_formats): Update initializers.
(init_fp_formats): Initialize new field.
(output_for_one_input_case): Allow underflow for results up to
min_plus_half.
* math/libm-test.inc (log1p_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Don't mark some underflows from asin and
atanh as spurious.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
My recent exp patch introduced warnings about implicit __isinf
declarations in exp because e_exp.c didn't include <math.h>. This
patch fixes this. Because <math.h> can't be included after
<math_private.h> (because of macro definitions of __nan*), it was
necessary to put an include in sysdeps/x86_64/fpu/multiarch/e_exp.c as
well.
Tested x86_64.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math.h>.
* sysdeps/x86_64/fpu/multiarch/e_exp.c
[HAVE_FMA4_SUPPORT || HAVE_AVX_SUPPORT]: Likewise.
This fixes a bug in the way the results from __nscd_getai are collected:
for every returned result a new entry is first added to the
gaih_addrtuple list, but if that result doesn't match the request this
entry remains uninitialized. So for this non-matching result an extra
result with uninitialized content is returned.
To reproduce (with nscd running):
$ getent ahostsv4 localhost
127.0.0.1 STREAM localhost
127.0.0.1 DGRAM
127.0.0.1 RAW
(null) STREAM
(null) DGRAM
(null) RAW
To reproduce:
# ip li add name dummy0 type dummy
# site_id=$(head -c6 /dev/urandom | od -tx2 -An | tr ' ' ':')
# for ((i = 0; i < 65536; i++)) do
> ip ad ad $(printf fd80$site_id::%04x $i)/128 dev dummy0
> done
# (ulimit -s 900; getent ahosts localhost)
# ip li de dummy0
The dbl-64 version of exp needs round-to-nearest mode for its internal
computations, but that has the consequence of inappropriate
overflowing and underflowing results in other rounding modes. This
patch fixes this by recomputing the relevant results in cases where
the round-to-nearest result overflows to infinity or underflows to
zero (most of the diffs are actually just consequent reindentation).
Tests are enabled in all rounding modes for complex functions using
exp - but not for cexp because it turns out there are bugs causing
spurious underflows for cexp for some tests, which will need to be
fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have
similar bugs, just not shown by the present set of test inputs).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16284]
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original
rounding mode to recompute results that overflow to infinity or
underflow to zero.
* math/auto-libm-test-in: Don't mark tests as expected to fail for
bug 16284.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (ccos_test): Use ALL_RM_TEST.
(ccosh_test): Likewise.
(csin_test_data): Use plus_oflow.
(csin_test): Use ALL_RM_TEST.
(csinh_test_data): Use plus_oflow.
(csinh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes -Wundef warnings related to the _ABI* macros on MIPS.
GCC predefines only the _ABI* macro related to the ABI actually in
use, meaning that a conditional such as "#if _MIPS_SIM == _ABI64" is
true only for the ABI in question (all the macros are nonzero), but
produces a -Wundef warning for the other ABIs. The normal approach to
using these macros is to include <sgidefs.h>, which ensures that all
three _ABI* macros are defined rather than just one; this patch does
so in the places that caused warnings (the bulk of the warnings
arising from <bits/wordsize.h>). Tested that the warnings are fixed.
* sysdeps/mips/bits/wordsize.h: Include <sgidefs.h>.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/setrlimit64.c: Likewise.
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch add an optimized strpbrk for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance on
the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and memory
clear using VSX instructions.
This patch makes libm-test.inc tests of most functions use ALL_RM_TEST
unless there was some reason to defer that change for a particular
function.
I started out planning to defer the change for pow (bug 16315), cexp /
ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and
cpow (exact expectations for signs of exact zero results not wanted).
Testing on x86_64 and x86 showed additional failures for acosh, cacos,
catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn,
so making the change for those functions was deferred as well, pending
investigation to show which of these represent distinct bugs (some
such bugs may already be filed) and appropriate fixing / XFAILing.
Failures include wrong signs of zero results, errors slightly above
the 9ulp bound (in such cases it may make sense for functions to set
round-to-nearest internally to reduce error accumulation), large
errors and incorrect overflow/underflow for the rounding mode (with
consequent missing errno settings in some cases). It's possible some
could be issues with test expectations, though I didn't notice any
that were obviously like that (I added NO_TEST_INLINE for cases that
were failing for ildoubl on x86 and where it seemed reasonable for
them to fail for the fast-math inlines).
There may of course be failures on other architectures for functions
that didn't fail on x86_64 or x86, in which case the usual rule
applies: file a bug (preferably identifying the underlying problem
function, in cases where function A calls function B and a problem
with function B may present in the test results for function A) if not
already in Bugzilla then fix or XFAIL.
Tested x86_64 and x86 and ulps updated accordingly.
* math/libm-test.inc (asinh_test): Use ALL_RM_TEST.
(atan_test): Likewise.
(atanh_test_data): Use NO_TEST_INLINE for two tests.
(atanh_test): Use ALL_RM_TEST.
(atan2_test_data): Likewise.
(cabs_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(cbrt_test): Likewise.
(csqrt_test): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(hypot_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(sincos_test): Likewise.
(tanh_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch add a optimized strcspn for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance
on the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and align
stack memory to table to 16 bytes (so VSX clean can ran without
alignment issues).
Reviewing (for all architectures, with a baseline kernel version of
2.6.32) the kernel support for features for which __ASSUME_* macros
would be affected by a move to 2.6.32 as minimum kernel version showed
up that __ASSUME_PREADV and __ASSUME_PWRITEV were wrongly defined for
MicroBlaze (despite the corresponding syscall table entries not being
wired up in the kernel) and Alpha for 2.6.30 and above (although the
support on Alpha was added in 2.6.33). This patch makes the
kernel-features.h files undefine those macros for appropriate
versions.
[BZ #16649]
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PREADV): Undefine.
[__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PWRITEV): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_PREADV): Undefine.
(__ASSUME_PWRITEV): Likewise.
This comment appears to have been copied from the ARM port where it
makes more sense.
2014-03-18 Will Newton <will.newton@linaro.org>
* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Remove
inaccurate comment.
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* sysdeps/generic/math_private.h: Check whether
HAVE_RM_CTX is defined with #ifdef rather
than #if.
ChangeLog:
2014-03-17 Will Newton <will.newton@linaro.org>
* sysdeps/generic/ldsodefs.h: Check whether
HP_SMALL_TIMING_AVAIL is defined with #ifdef rather
than #if.
The roundl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_roundl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_roundl.c instead fixes the failing math.
This fixes 16707.
The nearbyintl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c instead fixes the failing
math.
Fixes BZ#16706.
The ceill assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_ceill.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d40169 that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_ceill.c instead fixes the failing math.
Fixes BZ#16701.
It checks AVX-512 assembler support first and sets libc_cv_cc_avx512 to
$libc_cv_asm_avx512, instead of yes. GCC won't support AVX-512 if
assembler doesn't support it.
* sysdeps/x86_64/configure.ac: Check AVX-512 assembler support
first. Disable AVX-512 GCC support if assembler doesn't support
it.
* sysdeps/x86_64/configure: Regenerated.
