This closes one remaining race condition related to bug 12889: if
the thread already exited on the kernel side, returning ESRCH
is not correct because that error is reserved for the thread IDs
(pthread_t values) whose lifetime has ended. In case of a
kernel-side exit and a valid thread ID, no signal needs to be sent
and cancellation does not have an effect, so just return 0.
sysdeps/pthread/tst-kill4.c triggers undefined behavior and is
removed with this commit.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch removed redundant "#include <assert.h>" from
bench-memset-large.c and bench-memset-walk.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch enables scripts/plot_strings.py to read a benchmark result
file from stdin.
To keep backward compatibility, that is to keep accepting multiple of
benchmark result files in argument, blank argument doesn't mean stdin,
but '-' does.
Therefore nargs parameter of ArgumentParser.add_argument() method is
not changed to '?', but keep '+'.
ex:
$ jq '.' bench-memset.out | plot_strings.py -
$ jq '.' bench-memset.out | plot_strings.py - bench-memset-large.out
$ plot_strings.py bench-memset.out bench-memset-large.out
error ex:
$ jq '.' bench-memset.out | plot_strings.py
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
This macro definition enforces two arguments even with newer compilers
that accept the single-argument form, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
rpctrace(1) is a Hurd RPC tracer tool, which is used similar to how
strace(1) is used on GNU/Linux.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210907133325.255690-6-bugaevc@gmail.com>
Acked-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Linux 5.14 has two new syscalls, memfd_secret (on some architectures
only) and quotactl_fd. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
When a local resolver like unbound is listening on the IPv4 loopback
address 127.0.0.1, the nss/tst-nss-files-hosts-long test fails. This is
due to:
- the default resolver in the absence of resolv.conf being 127.0.0.1
- the default DNS NSS database configuration in the absence of
nsswitch.conf being 'hosts: dns [!UNAVAIL=return] file'
This causes the requests for 'test4' and 'test6' to first be sent to the
local resolver, which responds with NXDOMAIN in the likely case those
records do no exist. In turn that causes the access to /etc/hosts to be
skipped, which is the purpose of that test.
Fix that by providing a simple nsswitch.conf file forcing access to
/etc/hosts for that test. I have tested that the only changed result in
the testsuite is that test.
{f,l,}xstat stub for MIPS is using INTERNAL_SYSCALL
to do xstat syscall for glibc ver, However it leaves
errno untouched and thus giving bad errno output.
Setup errno properly when syscall returns non-zero.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We add a new C.UTF-8 locale. This locale is not builtin to glibc, but
is provided as a distinct locale. The locale provides full support for
UTF-8 and this includes full code point sorting via STRCMP-based
collation (strcmp or wcscmp).
The collation uses a new keyword 'codepoint_collation' which drops all
collation rules and generates an empty zero rules collation to enable
STRCMP usage in collation. This ensures that we get full code point
sorting for C.UTF-8 with a minimal 1406 bytes of overhead (LC_COLLATE
structure information and ASCII collating tables).
The new locale is added to SUPPORTED. Minimal test data for specific
code points (minus those not supported by collate-test) is provided in
C.UTF-8.in, and this verifies code point sorting is working reasonably
across the range. The locale was tested manually with the full set of
code points without failure.
The locale is harmonized with locales already shipping in various
downstream distributions. A new tst-iconv9 test is added which verifies
the C.UTF-8 locale is generally usable.
Testing for fnmatch, regexec, and recomp is provided by extending
bug-regex1, bugregex19, bug-regex4, bug-regex6, transbug, tst-fnmatch,
tst-regcomp-truncated, and tst-regex to use C.UTF-8.
Tested on x86_64 or i686 without regression.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Support a new directive 'codepoint_collation' in the LC_COLLATE
section of a locale source file. This new directive causes all
collation rules to be dropped and instead STRCMP (strcmp or
wcscmp) is used for collation of the input character set. This
is required to allow for a C.UTF-8 that contains zero collation
rules (minimal size) and sorts using code point sorting.
To date the only implementation of a locale with zero collation
rules is the C/POSIX locale. The C/POSIX locale provides
identity tables for _NL_COLLATE_COLLSEQMB and
_NL_COLLATE_COLLSEQWC that map to ASCII even though it has zero
rules. This has lead to existing fnmatch, regexec, and regcomp
implementations that require these tables. It is not correct
to use these tables when nrules == 0, but the conservative fix
is to provide these tables when nrules == 0. This assures that
existing static applications using a new C.UTF-8 locale with
'codepoint_collation' at least have functional range expressions
with ASCII e.g. [0-9] or [a-z]. Such static applications would
not have the fixes to fnmatch, regexec and regcomp that avoid
the use of the tables when nrules == 0. Future fixes to fnmatch,
regexec, and regcomp would allow range expressions to use the
full set of code points for such ranges.
Tested on x86_64 and i686 without regression.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch updates unroll8 code so as not to degrade at the peak
performance 16KB for both FX1000 and FX700.
Inserted 2 instructions at the beginning of the unroll8 loop,
cmp and branch, are a workaround that is found heuristically.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the shared code now has special status with respect to
copyrights, port them into a more structured format in the source tree
and add a python function that parses and returns a dictionary with
the information.
I need this to exclude these files from the Contributed-by changes and
I reckon it would be useful to know these files for future tooling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates unroll8 code so as not to degrade at the peak
performance 16KB for both FX1000 and FX700.
Inserted 2 instructions at the beginning of the unroll8 loop,
cmp and branch, are a workaround that is found heuristically.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
With the increasing adoption of UTF-8, modern editors may (will?)
replace iso-8859-encoded characters in the range 0x80..0xff with
their UTF-8 equivalent, as will mailers and other tools. This breaks
our testsuite and corrupts patches.
So, this patch starts replacing these problematic characters with
\OCTal sequences instead (adding support for those in tst-fnmatch.c)
or with plain ASCII characters (PTESTS).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When using LLD (LLVM linker) as the linker, configure prints a confusing
message.
*** These critical programs are missing or too old: GNU ld
LLD>=13.0.0 can build glibc --enable-static-pie. (8.0.0 needs one
workaround for -Wl,-defsym=_begin=0. 9.0.0 works with
--disable-static-pie).
XFAIL two tests sysdeps/x86/tst-ifunc-isa-* which have the BZ #28154
issue (LLD follows the PowerPC port of GNU ld for ifunc by placing
IRELATIVE relocations in .rela.dyn, triggering a glibc ifunc fragility).
The set of dynamic symbols is the same with GNU ld and LLD,
modulo unused SHN_ABS version node symbols.
For comparison, gold does not support --enable-static-pie
yet (--no-dynamic-linker is unsupported BZ #22221), yet
has 6 failures more than LLD. gold linked libc.so has
larger .dynsym differences with GNU ld and LLD
(non-default version symbols are changed to default versions
by a version script BZ #28196).
No "#pragma GCC" pragma allows macro-expansion of its arguments, so no
namespace issues arise from use of such pragmas in installed headers.
Ignore them in conformtest tests of header namespace.
Tested for x86_64, in conjunction with Paul's patch
<https://sourceware.org/pipermail/libc-alpha/2021-August/130571.html>
adding use of such pragmas to installed headers shared with gnulib.
A mapped temporary file and a semaphore is used to synchronize the
pid information on the created file, the semaphore is updated once
the file contents is flushed.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
Checked on x86_64-linux-gnu.
Fix two problems.
Rather than "larger than", better English is "greater than".
Then there is a wordinig error on the following line: "then lowfd"
appears to be cruft.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Glibc assumes that ENTRY_POINT is the lowest address for which we need
to keep profiling records and BFD linker uses a linker script to place
the input sections.
Starting from GCC 4.6, the main function is placed in .text.startup
section and starting from binutils 2.22, BFD linker with
commit add44f8d5c5c05e08b11e033127a744d61c26aee
Author: Alan Modra <amodra@gmail.com>
Date: Thu Nov 25 03:03:02 2010 +0000
* scripttempl/elf.sc: Group .text.exit, text.startup and .text.hot
sections.
places .text.startup section before .text section, which leave the main
function out of profiling records.
Starting from binutils 2.15, linker provides __executable_start to mark
the lowest address of the executable. Use __executable_start as the
lowest address to keep the main function in profiling records. This fixes
[BZ #28153].
Tested on Linux/x86-64, Linux/x32 and Linux/i686 as well as with
build-many-glibcs.py.
On the Hurd, the errno values don't start at 0, so _sys_errlist_internal
needs index remapping. The _sys_errlist_internal definition already properly
uses ERR_MAP, but __get_errlist and __get_errname were not.
Current GCC mainline produces -Wstringop-overflow errors building some
iconv converters, as discussed at
<https://gcc.gnu.org/pipermail/gcc/2021-July/236943.html>. Add an
__builtin_unreachable call as suggested so that GCC can see the case
that would involve a buffer overflow is unreachable; because the
unreachability depends on valid conversion state being passed into the
function from previous conversion steps, it's not something the
compiler can reasonably deduce on its own.
Tested with build-many-glibcs.py that, together with
<https://sourceware.org/pipermail/libc-alpha/2021-August/130244.html>,
it restores the glibc build for powerpc-linux-gnu.
Avoid triggering a false positive from valgrind by copying the terminating
null in tunables_strdup. At this point the heap is still clean, but
valgrind is stricter here.
Record only the relative address of the caller in mtrace file. Use
LD_TRACE_PRELINKING to get the executable as well as binary vs
executable load offsets so that we may compute a base to add to the
relative address in the mtrace file. This allows us to get a valid
address to pass to addr2line in all cases.
Fixes BZ #22716.
Co-authored-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Optimize loads of all bits set into ZMM register in AVX512 SVML codes
by replacing
vpbroadcastq .L_2il0floatpacket.16(%rip), %zmmX
and
vmovups .L_2il0floatpacket.13(%rip), %zmmX
with
vpternlogd $0xff, %zmmX, %zmmX, %zmmX
This fixes BZ #28252.
The Autoconf documentation for the AC_CACHE_CHECK macro states:
The commands-to-set-it must have no side effects except for setting
the variable cache-id, see below.
However, the tests for support of -msahf and -mmovbe were embedded in
the commands-to-set-it for lib_cv_include_x86_isa_level. This had the
consequence that libc_cv_have_x86_lahf_sahf and libc_cv_have_x86_movbe
were not defined whenever lib_cv_include_x86_isa_level was read from
cache. These variables' being undefined meant that their unquoted use
in later test expressions led to the 'test' built-in's misparsing its
arguments and emitting errors like "test: =: unexpected operator" or
"test: =: unary operator expected", depending on the particular shell.
This commit refactors the tests for LAHF/SAHF and MOVBE instruction
support into their own AC_CACHE_CHECK macro invocations to obey the
rule that the commands-to-set-it must have no side effects other than
setting the variable named by cache-id.
Signed-off-by: Matt Whitlock <sourceware@mattwhitlock.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269
(x86-64) and 43d06ed218 (aarch64).
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
&__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269
(x86-64) and 43d06ed218 (aarch64).
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
