Save lr in a non-volatile register before scv in clone/clone3.
For clone, the non-volatile register was unused and already
saved/restored. Remove the dead code from clone.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
In both routines, reduce register pressure such that GCC 14 emits no
spills for erf and fewer spills for erfc. Also use more efficient
comparison for the special-case in erf.
Benchtests show erf improves by 6.4%, erfc by 1.0%.
This avoids -Werror build issues in strace, which bundles UAPI
headers, but does not include them as system headers.
Fixes commit c444cc1d83
("Linux: Add missing scheduler constants to <sched.h>").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add basic tests of pthread_mutexattr_gettype and
pthread_mutexattr_settype with each valid mutex kind, plus test for
EINVAL with an invalid mutex kind.
Tested for x86_64.
The pthread_timedjoin_np and pthread_clockjoin_np functions do not
check that a valid time has been specified. The documentation for
these functions in the glibc manual isn't sufficiently detailed to say
if they should, but consistency with POSIX functions such as
pthread_mutex_timedlock and pthread_cond_timedwait strongly indicates
that an EINVAL error is appropriate (even if there might be some
ambiguity about exactly where such a check should go in relation to
other checks for whether the thread exists, whether it's immediately
joinable, etc.). Copy the logic for such a check used in
pthread_rwlock_common.c.
pthread_join_common had some logic calling valid_nanoseconds before
commit 9e92278ffa, "nptl: Remove
clockwait_tid"; I haven't checked exactly what cases that detected.
Tested for x86_64 and x86.
The commit 'sparc: Use Linux kABI for syscall return'
(86c5d2cf0c) did not take into account
a subtle sparc syscall kABI constraint. For syscalls that might block
indefinitely, on an interrupt (like SIGCONT) the kernel will set the
instruction pointer to just before the syscall:
arch/sparc/kernel/signal_64.c
476 static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
477 {
[...]
525 if (restart_syscall) {
526 switch (regs->u_regs[UREG_I0]) {
527 case ERESTARTNOHAND:
528 case ERESTARTSYS:
529 case ERESTARTNOINTR:
530 /* replay the system call when we are done */
531 regs->u_regs[UREG_I0] = orig_i0;
532 regs->tpc -= 4;
533 regs->tnpc -= 4;
534 pt_regs_clear_syscall(regs);
535 fallthrough;
536 case ERESTART_RESTARTBLOCK:
537 regs->u_regs[UREG_G1] = __NR_restart_syscall;
538 regs->tpc -= 4;
539 regs->tnpc -= 4;
540 pt_regs_clear_syscall(regs);
541 }
However, on a SIGCONT it seems that 'g1' register is being clobbered after the
syscall returns. Before 86c5d2cf0c, the 'g1' was always placed jus
before the 'ta' instruction which then reloads the syscall number and restarts
the syscall.
On master, where 'g1' might be placed before 'ta':
$ cat test.c
#include <unistd.h>
int main ()
{
pause ();
}
$ gcc test.c -o test
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0
On another terminal
$ kill -STOP 2262828
$ strace -f ./t
[...]
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
And then
$ kill -CONT 2262828
Results in:
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
restart_syscall(<... resuming interrupted ppoll ...>) = -1 EINTR (Interrupted system call)
Where the expected behaviour would be:
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0) = ? ERESTARTNOHAND (To be restarted if no handler)
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
ppoll(NULL, 0, NULL, NULL, 0
Just moving the 'g1' setting near the syscall asm is not suffice,
the compiler might optimize it away (as I saw on cancellation.c by
trying this fix). Instead, I have change the inline asm to put the
'g1' setup in ithe asm block. This would require to change the asm
constraint for INTERNAL_SYSCALL_NCS, since the syscall number is not
constant.
Checked on sparc64-linux-gnu.
Reported-by: René Rebe <rene@exactcode.de>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sam James <sam@gentoo.org>
The CORE-MATH implementation is correctly rounded (for any rounding mode).
This can be checked by exhaustive tests in a few minutes since there are
less than 2^32 values to check against for example GNU MPFR.
This patch also adds some bench values for tgammaf.
Tested on x86_64 and x86 (cfarm26).
With the initial GNU libc code it gave on an Intel(R) Core(TM) i7-8700:
"tgammaf": {
"": {
"duration": 3.50188e+09,
"iterations": 2e+07,
"max": 602.891,
"min": 65.1415,
"mean": 175.094
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.30825e+09,
"iterations": 5e+07,
"max": 211.592,
"min": 32.0325,
"mean": 66.1649
}
}
With the initial GNU libc code it gave on cfarm26 (i686):
"tgammaf": {
"": {
"duration": 3.70505e+09,
"iterations": 6e+06,
"max": 2420.23,
"min": 243.154,
"mean": 617.509
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.24497e+09,
"iterations": 1.8e+07,
"max": 1238.15,
"min": 101.155,
"mean": 180.276
}
}
Signed-off-by: Alexei Sibidanov <sibid@uvic.ca>
Signed-off-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Changes in v2:
- include <math.h> (fix the linknamespace failures)
- restored original benchtests/strcoll-inputs/filelist#en_US.UTF-8 file
- restored original wrapper code (math/w_tgammaf_compat.c),
except for the dealing with the sign
- removed the tgammaf/float entries in all libm-test-ulps files
- address other comments from Joseph Myers
(https://sourceware.org/pipermail/libc-alpha/2024-July/158736.html)
Changes in v3:
- pass NULL argument for signgam from w_tgammaf_compat.c
- use of math_narrow_eval
- added more comments
Changes in v4:
- initialize local_signgam to 0 in math/w_tgamma_template.c
- replace sysdeps/ieee754/dbl-64/gamma_productf.c by dummy file
Changes in v5:
- do not mention local_signgam any more in math/w_tgammaf_compat.c
- initialize local_signgam to 1 instead of 0 in w_tgamma_template.c
and added comment
Changes in v6:
- pass NULL as 2nd argument of __ieee754_gammaf_r in
w_tgammaf_compat.c, and check for NULL in e_gammaf_r.c
Changes in v7:
- added Signed-off-by line for Alexei Sibidanov (author of the code)
Changes in v8:
- added Signed-off-by line for Paul Zimmermann (submitted of the patch)
Changes in v9:
- address comments from review by Adhemerval Zanella
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 6.11 adds the new flag for pwritev2 (commit
c34fc6f26ab86d03a2d47446f42b6cd492dfdc56).
Checked on x86_64-linux-gnu on 6.11 kernel.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch updates the kernel version in the tests tst-mount-consts.py,
and tst-sched-consts.py to 6.11.
There are no new constants covered by these tests in 6.11.
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This request the page to be never written out to swap, it will be zeroed
under memory pressure (so kernel can just drop the page), it is inherited
by fork, it is not counted against @code{mlock} budget, and if there is
no enough memory to service a page faults there is no fatal error (so not
signal is sent).
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.11 adds some more PIDFD_* constants for 'pidfs: allow retrieval
of namespace file descriptors'
(5b08bd408534bfb3a7cf5778da5b27d4e4fffe12).
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.11 changes for syscall are:
* fstat/newfstatat for loongarch (it should be safe to add since
255dc1e4ed that undefine them).
* clone3 for nios2, which only adds the entry point but defined
__ARCH_BROKEN_SYS_CLONE3 (the syscall will always return ENOSYS).
* uretprobe for x86_64 and x32.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
GCC mainline produces a -Wheader-guard error building for x86_64-gnu.
Fix what seems to be incorrect macro naming in the #ifndef
conditional.
Tested with build-many-glibc.py for x86_64-gnu (GCC mainline).
Message-ID: <fd800046-5ecb-ebd5-4df1-29d4eb3d5433@redhat.com>
The recursive lock used on abort does not synchronize with a new process
creation (either by fork-like interfaces or posix_spawn ones), nor it
is reinitialized after fork().
Also, the SIGABRT unblock before raise() shows another race condition,
where a fork or posix_spawn() call by another thread, just after the
recursive lock release and before the SIGABRT signal, might create
programs with a non-expected signal mask. With the default option
(without POSIX_SPAWN_SETSIGDEF), the process can see SIG_DFL for
SIGABRT, where it should be SIG_IGN.
To fix the AS-safe, raise() does not change the process signal mask,
and an AS-safe lock is used if a SIGABRT is installed or the process
is blocked or ignored. With the signal mask change removal,
there is no need to use a recursive loc. The lock is also taken on
both _Fork() and posix_spawn(), to avoid the spawn process to see the
abort handler as SIG_DFL.
A read-write lock is used to avoid serialize _Fork and posix_spawn
execution. Both sigaction (SIGABRT) and abort() requires to lock
as writer (since both change the disposition).
The fallback is also simplified: there is no need to use a loop of
ABORT_INSTRUCTION after _exit() (if the syscall does not terminate the
process, the system is broken).
The proposed fix changes how setjmp works on a SIGABRT handler, where
glibc does not save the signal mask. So usage like the below will now
always abort.
static volatile int chk_fail_ok;
static jmp_buf chk_fail_buf;
static void
handler (int sig)
{
if (chk_fail_ok)
{
chk_fail_ok = 0;
longjmp (chk_fail_buf, 1);
}
else
_exit (127);
}
[...]
signal (SIGABRT, handler);
[....]
chk_fail_ok = 1;
if (! setjmp (chk_fail_buf))
{
// Something that can calls abort, like a failed fortify function.
chk_fail_ok = 0;
printf ("FAIL\n");
}
Such cases will need to use sigsetjmp instead.
The _dl_start_profile calls sigaction through _profil, and to avoid
pulling abort() on loader the call is replaced with __libc_sigaction.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The BZ#24967 fix (1bdda52fe9) missed the time for
architectures that define USE_IFUNC_TIME. Although it is not
an issue, since there is no pointer mangling, there is also no need
to call dl_vdso_vsym since the vDSO setup was already done by the
loader.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The BZ#24967 fix (1bdda52fe9) missed the gettimeofday for
architectures that define USE_IFUNC_GETTIMEOFDAY. Although it is not
an issue, since there is no pointer mangling, there is also no need
to call dl_vdso_vsym since the vDSO setup was already done by the
loader.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Building the s390 specific iconv modules - utf16-utf32-z9.c, utf8-utf32-z9.c
and utf8-utf16-z9.c - with -fno-omit-frame-pointer leads to a build error
"error: %r11 cannot be used in 'asm' here" as r11 is needed as frame-pointer.
The cuXY-instructions need two even-odd register pairs. Therefore the register
pinning is used. This patch just uses a different register pair.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Several copies of the licenses in files contained whitespace related
problems. Two cases are addressed here, the first is two spaces
after a period which appears between "PURPOSE." and "See". The other
is a space after the last forward slash in the URL. Both issues are
corrected and the licenses now match the official textual description
of the license (and the other license in the sources).
Since these whitespaces changes do not alter the paragraph structure of
the license, nor create new sentences, they do not change the license.
The sparc clone mitigation (faeaa3bc9f) added the use of
flushw, which is not support by LEON/sparcv8. As discussed on
the libc-alpha, 'ta 3' is a working alternative [1].
[1] https://sourceware.org/pipermail/libc-alpha/2024-August/158905.html
Checked with a build for sparcv8-linux-gnu targetting leon.
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
LEON2/LEON3 are both sparcv8, which does not support branch hints
(bne,pn) nor the return instruction.
Checked with a build for sparcv8-linux-gnu targetting leon. I also
checked some cancellation tests with qemu-system (targeting LEON3).
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
GCC aligns global data to 16 bytes if their size is >= 16 bytes. This patch
changes the exp2f_data struct slightly so that the fields are better aligned.
As a result on targets that support them, load-pair instructions accessing
poly_scaled and invln2_scaled are now 16-byte aligned.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The loop should be aligned to 32-bytes so that it can ideally run out
the DSB. This is particularly important on Skylake-Server where
deficiencies in it's DSB implementation make it prone to not being
able to run loops out of the DSB.
For example running strcmp-evex on 200Mb string:
32-byte aligned loop:
- 43,399,578,766 idq.dsb_uops
not 32-byte aligned loop:
- 6,060,139,704 idq.dsb_uops
This results in a 25% performance degradation for the non-aligned
version.
The fix is to just ensure the code layout is such that the loop is
aligned. (Which was previously the case but was accidentally dropped
in 84e7c46df).
NB: The fix was actually 64-byte alignment. This is because 64-byte
alignment generally produces more stable performance than 32-byte
aligned code (cache line crosses can affect perf), so if we are going
past 16-byte alignmnent, might as well go to 64. 64-byte alignment
also matches most other functions we over-align, so it creates a
common point of optimization.
Times are reported as ratio of Time_With_Patch /
Time_Without_Patch. Lower is better.
The values being reported is the geometric mean of the ratio across
all tests in bench-strcmp and bench-strncmp.
Note this patch is only attempting to improve the Skylake-Server
strcmp for long strings. The rest of the numbers are only to test for
regressions.
Tigerlake Results Strings <= 512:
strcmp : 1.026
strncmp: 0.949
Tigerlake Results Strings > 512:
strcmp : 0.994
strncmp: 0.998
Skylake-Server Results Strings <= 512:
strcmp : 0.945
strncmp: 0.943
Skylake-Server Results Strings > 512:
strcmp : 0.778
strncmp: 1.000
The 2.6% regression on TGL-strcmp is due to slowdowns caused by
changes in alignment of code handling small sizes (most on the
page-cross logic). These should be safe to ignore because 1) We
previously only 16-byte aligned the function so this behavior is not
new and was essentially up to chance before this patch and 2) this
type of alignment related regression on small sizes really only comes
up in tight micro-benchmark loops and is unlikely to have any affect
on realworld performance.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This hides the inconsistent TCB state (missing robust mutex list) from
signal handlers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In Linux 6.11, fstat and newfstatat are added back. To avoid the messy
usage of the fstat, newfstatat, and statx system calls, we will continue
using statx only in glibc, maintaining consistency with previous versions of
the LoongArch-specific glibc implementation.
Signed-off-by: caiyinyu <caiyinyu@loongson.cn>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: Florian Weimer <fweimer@redhat.com>
This operation can be simplified to use simpler multiply-round-convert
sequence, which uses fewer instructions and constants.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Rearrange operations so MOV is not necessary in reduction or around
the special-case handler. Reduce memory access by using more indexed
MLAs in polynomial.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
log1pf is quite register-intensive - use fewer registers for the
polynomial, and make various changes to shorten dependency chains in
parent routines. There is now no spilling with GCC 14. Accuracy moves
around a little - comments adjusted accordingly but does not require
regen-ulps.
Use the helper in log1pf as well, instead of having separate
implementations. The more accurate polynomial means special-casing can
be simplified, and the shorter dependency chain avoids the usual dance
around v0, which is otherwise difficult.
There is a small duplication of vectors containing 1.0f (or 0x3f800000) -
GCC is not currently able to efficiently handle values which fit in FMOV
but not MOVI, and are reinterpreted to integer. There may be potential
for more optimisation if this is fixed.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reduce MOVPRFXs by using unpredicated (non-destructive) instructions
where possible. Similar to the recent change to AdvSIMD F32 logs,
adjust special-case arguments and bounds to allow for more optimal
register usage. For all 3 routines one MOVPRFX remains in the
reduction, which cannot be avoided as immediate AND and ASR are both
destructive.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reduce MOV and MOVPRFX by improving special-case handling. Use inline
helper to duplicate the entire computation between the special- and
non-special case branches, removing the contention for z0 between x
and the return value.
Also rearrange some MLAs and MLSs - by making the multiplicand the
destination we can avoid a MOVPRFX in several cases. Also change which
constants go in the vector used for lanewise ops - the last lane is no
longer wasted.
Spotted that shift was incorrect in exp2f and exp10f, w.r.t. to the
comment that explains it. Fixed - worst-case ULP for exp2f moves
around but it doesn't change significantly for either routine.
Worst-case error for coshf increases due to passing x to exp rather
than abs(x) - updated the comment, but does not require regen-ulps.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
It is not necessary to do the conversion at the getdents64
layer for readdir64_r. Doing it piecewise for readdir64
is slightly simpler and allows deleting __old_getdents64.
This fixes bug 32128 because readdir64_r handles the length
check correctly.
Reviewed-by: DJ Delorie <dj@redhat.com>
This enables vectorisation of C23 logp1, which is an alias for log1p.
There are no new tests or ulp entries because the new symbols are simply
aliases.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
A common use case of access () / faccessat () is checking for file
existence, not any specific access permissions. In that case, we can
avoid doing the file_check_access () RPC; whether the given path had
been successfully resolved to a file is all we need to know to answer.
This is prompted by GLib switching to use faccessat (F_OK) to implement
g_file_query_exists () for local files.
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4272
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240919101439.179663-1-bugaevc@gmail.com>
And struct sched_attr.
In sysdeps/unix/sysv/linux/bits/sched.h, the hack that defines
sched_param around the inclusion of <linux/sched/types.h> is quite
ugly, but the definition of struct sched_param has already been
dropped by the kernel, so there is nothing else we can do and maintain
compatibility of <sched.h> with a wide range of kernel header
versions. (An alternative would involve introducing a separate header
for this functionality, but this seems unnecessary.)
The existing sched_* functions that change scheduler parameters
are already incompatible with PTHREAD_PRIO_PROTECT mutexes, so
there is no harm in adding more functionality in this area.
The documentation mostly defers to the Linux manual pages.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Improve small memsets by avoiding branches and use overlapping stores.
Use DC ZVA for copies over 128 bytes. Remove unnecessary code for ZVA sizes
other than 64 and 128. Performance of random memset benchmark improves by 24%
on Neoverse N1.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since the last operation is destructive, the first argument to the FMA
also has to be the first argument to the special-case in order to
avoid unnecessary MOVs. Reorder arguments and adjust special-case
bounds to facilitate this.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
