According to "Requirements of information technology in Estonian
language and cultural environment" the monetary symbol should be
written after the amount number:
https://www.evs.ee/products/evs-8-2008
ISO C allows feraiseexcept to raise "inexact", in addition to the
requested exceptions, when requested to raise "overflow" or
"underflow". Testing on ARM and PowerPC e500 (where glibc's
feraiseexcept has this property) showed that the new test-fexcept test
failed to allow for this; this patch fixes it, by wrapping
feraiseexcept to clear FE_INEXACT if implicitly raised and not raised
before the call. (It would also be possible to do this with
fesetexcept, which always affects exactly the requested flags, but
this patch avoids making this fix depend on the fesetexcept changes.)
Tested for x86_64, x86, arm and e500.
* math/test-fexcept.c (feraiseexcept_exact): New function.
(test_set): Call feraiseexcept_exact instead of feraiseexcept.
(test_except): Likewise.
As shown by the test math/test-fexcept, the powerpc fesetexceptflag
implementation fails to clear a previously set FE_INVALID flag, when
that flag is clear in the saved exceptions and FE_INVALID is included
in the mask of flags to restore, because it fails to mask out the
sub-exceptions of FE_INVALID from the FPSCR state. This patch fixes
the masking logic accordingly.
Tested for powerpc.
[BZ #20455]
* sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Mask out
all FE_INVALID sub-exceptions from FPSCR when FE_INVALID specified
to be restored.
I noticed that there was no meaningful test coverage for
fegetexceptflag and fesetexceptflag (one test ensures that calls to
them compile and link, but nothing to verify they work correctly).
This patch adds tests for these functions.
fesetexceptflag is meant to set the relevant exception flag bits to
the saved state without causing enabled traps to be taken. On some
architectures, it is not possible to set exception flag bits without
causing enabled traps to occur. Such architectures need to define
EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in
this patch for powerpc. x86 avoids needing to define this because the
traps resulting from setting exception bits don't occur until the next
floating-point operation or fwait instruction.
Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for
powerpc because of a pre-existing bug in fesetexceptflag for powerpc,
which I'll fix separately.
* math/test-fexcept-traps.c: New file.
* math/test-fexcept.c: Likewise.
* math/Makefile (tests): Add test-fexcept and test-fexcept-traps.
* sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New
macro.
* sysdeps/powerpc/math-tests.h [!__NO_FPRS__]
(EXCEPTION_SET_FORCES_TRAP): Likewise.
The date format in en_CA/LC_TIME specifies the date format as "%d/%m/%y".
However, it should be "%Y-%m-%d". This is the standard date format in
Canada as specified by the Canadian Standards Association in CSA Z234.5:1989,
which adopts the ISO 8601 standard.
Here's the web page from the National Research Council of Canada
citing ISO 8601 as the standard date/time format in Canada:
http://www.nrc-cnrc.gc.ca/eng/services/time/faq/#Q8
International Standard ISO 8601 specifies numeric representations
of date and time. The recommended full format is of the form
2001-12-31 23:59:28.73 UTC. The intent of this standard is to avoid
confusion in international communications which can arise with the
many different national notations. This format has the advantage
that it permits dates to be readily sorted in chronological order
by computer systems.
Windows 8+ and OS X also switched to this format.
sparc32 passes floating point values in the integer registers. VIS3
instructions gives access to the movwtos instruction to directly
transfer a value from an integer register to a floating point register.
Therefore it makes sense to provide a VIS3 version consisting in the
generic version compiled with -mvis3.
Changelog:
* math/s_fdim.c: Avoid alias renamed.
* math/s_fdimf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_fdimf-vis3, s_fdim-vis3.
(CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_fdim-vis3.c): Likewise.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
The fdim and fdimf functions on sparc do not fully follow the standard
and do not set errno to ERANGE when the result overflows. Since glibc
2.24 this causes the two following tests to fail:
Failure: fdim (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
Failure: fdim_upward (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
It happens that using GCC with the generic C code generates very similar
code to the sparc specific implementations. Therefore this patches
remove them. Note it might still worth adding a vis3 specific version of
fdim on sparc32/sparcv9, this is done in a following patch to ease
backporting.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_fdimf-vis3, s_fdim-vis3.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: Delete file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: Likewise.
When building for sparc32/sparcv9 or sparc64, we assume that VIS
instructions are available and use them in the sparc specific assembly
code. However we do not tell GCC to use such instructions, resulting in
slightly suboptimal code.
Fix that by passing -Wa,-Av9a -mvis to GCC.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/Makefile (sysdep-CFLAGS): Add -mvis.
* sysdeps/sparc/sparc64/Makefile (sysdep-CFLAGS): New. Define to
-Wa,-Av9a -mvis.
When bootstrapping float128, this exposed a number of areas where
the L suffix is incorrectly applied to simple expressions when it
should be applied to each constant in the expression.
In order to stave off more macros in libm-test.inc, apply_lit is
made slightly more intelligent. It will now split expressions
based on space characters, and attempt to apply LIT() to each
token.
Having done this, there are numerous spacing issues within
libm-test.inc which have been fixed.
The above is problematic when the L real suffix is not the most
expressive modifier, and the compiler complains (i.e ppc64) or
silently truncates a value (i.e ppc64).
math.h has a comment about definitions from <bits/mathdef.h>. This
comment is in the wrong place in math.h, far below the inclusion of
<bits/mathdef.h>. It was originally above the inclusion, but the
inclusion was moved by
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
[...]
without moving the comment. Furthermore, the comment refers
incorrectly to FLT_EVAL_METHOD and DECIMAL_DIG, which are actually
<float.h> macros, and INFINITY, which is in <bits/inf.h>.
This patch moves the comment back above the include it refers to and
removes the description of macros not defined by the header.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* math/math.h: Move comment about <bits/mathdef.h> definitions
above inclusion of <bits/mathdef.h>. Do not mention
FLT_EVAL_METHOD, INFINITY or DECIMAL_DIG in that comment.
When libm functions return a NaN: if it is for NaN input, it should be
computed from that input (e.g. adding it to itself), so that payloads
are propagated and signaling NaNs quieted, while if it is for non-NaN
input, it should be produced by a computation such as
(x - x) / (x - x), which raises "invalid" at the same time as
producing an appropriate NaN, so avoiding any need for a call to
feraiseexcept.
Various libm functions, however, call __nan ("") (or __nanf or __nanl)
to determine the NaN to return, together with using feraiseexcept
(FE_INVALID) to raise the exception. sysdeps/generic/math_private.h
has an optimization for those functions with constant "" argument so
this doesn't actually involve a call to the __nan function, but it is
still not the preferred approach for producing NaNs. (The optimized
code also always uses the NAN macro, i.e. produces a default NaN for
float converted to whatever the target type is, and on some
architectures that may not be the same as the preferred default NaN
for double or long double.)
This patch fixes the scalb functions to use the conventional method of
generating NaNs and raising "invalid" with an appropriate
computation. (Most instances of this issue are in the complex
functions, where it can more readily be fixed once they have been made
type-generic and so only a third as many places need fixing. Some of
the complex functions use __nan ("") + __nan (""), where the addition
serves no purpose whatsoever.)
Tested for x86_64 and x86.
* math/e_scalb.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbf.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbl.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
Static libraries can use the sysdep.o copy in libc.a without
a performance penalty. This results in a visible difference
if libpthread.a is relinked into a single object file (which
is needed to support libraries which check for the presence
of certain symbols to enable threading support, which generally
fails with static linking unless libpthread.a is relinked).
My __STDC_WANT_IEC_60559_BFP_EXT__ patch omitted to update the
conditions on the nextup and nextdown type-generic macros in
<tgmath.h>. This patch updates those conditions accordingly. (As
glibc doesn't currently have an exp10 type-generic macro, no such
changes are needed relating to __STDC_WANT_IEC_60559_FUNCS_EXT__;
adding such a type-generic macro would be a new feature.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). Committed.
* math/tgmath.h (nextdown): Define if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not if [__USE_GNU].
(nextup): Likewise.
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
The macros defined by <sys/sysmacros.h> are not part of POSIX nor XSI, and
their names frequently collide with user code; see for instance glibc bug
19239 and Red Hat bug 130601. <stdlib.h> includes <sys/types.h> under
_GNU_SOURCE, and C++ code presently cannot avoid being compiled under
_GNU_SOURCE, exacerbating the problem.
* NEWS: Inclusion of <sys/sysmacros.h> by <sys/types.h> is deprecated.
* misc/sys/sysmacros.h: If __SYSMACROS_DEPRECATED_INCLUSION is defined,
define major, minor, and makedev to issue deprecation warnings on use.
If __SYSMACROS_DEPRECATED_INCLUSION is *not* defined, suppress
previously-activated deprecation warnings for these macros and prevent
subsequent inclusions of this header from having any effect.
* posix/sys/types.h: Define __SYSMACROS_DEPRECATED_INCLUSION before
including <sys/sysmacros.h>, and undefine it again afterward.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would
mean that the deprecation logic coming up in the next patch would have
to be written twice (in generic/ and unix/sysv/linux/). To avoid that,
hoist all but the unavoidably system-dependent logic to misc/, leaving a
bits/ header behind. This also promotes the Linux-specific encoding of
dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t,
to generic, as glibc's dev_t is always 64 bits wide.
The former Linux implementation used inline functions to avoid evaluating
arguments more than once. After this change, all platforms use inline
functions, which means that three new symbols are added to the generic ABI.
(These symbols are in the user namespace, which is how they have always
been on Linux. They begin with "gnu_dev_", so collisions with user code
are pretty unlikely.)
New ports henceforth need only provide a bits/sysmacros.h defining
internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}.
This is only necessary if the kernel encoding is incompatible with
the now-generic encoding (for instance, it would be necessary for
FreeBSD).
While I was at it, I added a basic round-trip test for these functions.
* sysdeps/generic/sys/sysmacros.h: Delete file.
* sysdeps/unix/sysv/linux/makedev.c: Delete file.
* sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ...
* bits/sysmacros.h: ... here; this encoding is now the generic
encoding. Now defines only the following macros:
__SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR,
__SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR,
__SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV.
* misc/sys/sysmacros.h, misc/makedev.c: New files that use
bits/sysmacros.h and the above new macros to generate the
public implementations of major, minor, and makedev.
* misc/tst-makedev.c: New test.
* include/sys/sysmacros.h: New wrapper.
* misc/Makefile (headers): Add sys/sysmacros.h, bits/sysmacros.h.
(routines): Add makedev.
(tests): Add tst-makedev.
* misc/Versions [GLIBC_2.25]: Add gnu_dev_major, gnu_dev_minor,
gnu_dev_makedev.
* posix/Makefile (headers): Remove sys/sysmacros.h.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove makedev.
* sysdeps/arm/nacl/libc.abilist: Add GLIBC_2.25,
gnu_dev_major, gnu_dev_makedev, gnu_dev_minor.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add GLIBC_2.25.
There are three new macros added to features.h and sys/cdefs.h:
* __glibc_clang_prereq: just like __GNUC_PREREQ, but for clang.
* __glibc_clang_has_extension: wraps clang's intrinsic __has_extension.
Writing "#if defined __clang__ && __has_extension (...)" doesn't work,
because compilers other than clang will object to the unknown macro
__has_extension even though they don't need to evaluate it.
Instead, write "#if __glibc_clang_has_extension (...)".
* __attribute_deprecated_msg__(msg): like __attribute_deprecated__, but
if possible, prints a message.
The first two are used to define the third. The third will be used
in subsequent patches.
* include/features.h (__glibc_clang_prereq): New macro.
* misc/sys/cdefs.h (__glibc_clang_has_extension)
(__attribute_deprecated_msg__): New macros.
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).
Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously). Any further features
from this TS added in future would also be conditioned on this macro.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
* manual/arith.texi (issignaling): Document as ISO from TS
18661-1:2014.
(nextup): Likewise.
(nextupf): Likewise.
(nextupl): Likewise.
(nextdown): Likewise.
(nextdownf): Likewise.
(nextdownl): Likewise.
* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
macro.
* math/math.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
[__USE_GNU].
* math/bits/mathcalls.h (nextdown): Declare if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
(nextup): Likewise.
(__issignaling): Likewise.
While trying to convert the _Complex function wrappers
into a single generic implementation, a few minor
variations between identical versions emerged.
In order to support more types, the Makefile needs a few bits
shuffled.
F is explictly used as a placeholder to substitute for the
appropriate type suffix. This removes the need to demangle
_r suffixed objects.
The variable libm-compat-calls is added to house any objects which
are only built to provide compat symbols within libm. That is,
no newly added type should ever attempt building these. Note,
k_standard* files have been added there. By consensus they are
deprecated; in practice, we haven't gotten there yet.
New types would be added as noted in the comments preceding
type-TYPE-{suffix,routines,yes} variables. However, some manual
additions will still need to be done to add appropriate flags
when building the various variants of libm-test.c for a new type.
Likewise, test-ildoubl is renamed test-ildouble for consistency's
sake.
There is quiet truncation to double arithmetic in several
files. I noticed them when building ldbl-128 in a
soft-fp context. This did not change any test results.
This adds an include guard and __BEGIN/__END_DECLS to proc_service.h,
removes some extraneous "const"s, and then arranges to install the
header. The idea here is to make it more convenient to implement the
proc_service.h API.
Instead, call malloc and explicitly align the pointer.
There is no external location to store the original (unaligned)
pointer, and this commit increases the allocation size to store
the pointer at a fixed location relative to the TCB pointer.
The manual alignment means that some space goes unused which
was previously made available for subsequent allocations.
However, in the TLS_DTV_AT_TP case, the manual alignment code
avoids aligning the pre-TCB to the TLS block alignment. (Even
while using memalign, the allocation had some unused padding
in front.)
This concludes the removal of memalign calls from the TLS code,
and the new tst-tls3-malloc test verifies that only core malloc
routines are used.
Instead of a flag which indicates the pointer can be freed, dtv_t
now includes the pointer which should be freed. Due to padding,
the size of dtv_t does not increase.
To avoid using memalign, the new allocate_dtv_entry function
allocates a sufficiently large buffer so that a sub-buffer
can be found in it which starts with an aligned pointer. Both
the aligned and original pointers are kept, the latter for calling
free later.
The dynamic linker currently uses __libc_memalign for TLS-related
allocations. The goal is to switch to malloc instead. If the minimal
malloc follows the ABI fundamental alignment, we can assume that malloc
provides this alignment, and thus skip explicit alignment in a few
cases as an optimization.
It was requested on libc-alpha that MALLOC_ALIGNMENT should be used,
although this results in wasted space if MALLOC_ALIGNMENT is larger
than the fundamental alignment. (The dynamic linker cannot assume
that the non-minimal malloc will provide an alignment of
MALLOC_ALIGNMENT; the ABI provides _Alignof (max_align_t) only.)
This patch adds the new UDP_ENCAP_GTP0 and UDP_ENCAP_GTP1U from Linux
4.7 to sysdeps/gnu/netinet/udp.h.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/gnu/netinet/udp.h (UDP_ENCAP_GTP0): New macro.
(UDP_ENCAP_GTP1U): Likewise.
This patch adds the new PF_QIPCRTR and AF_QIPCRTR from Linux 4.7 to
sysdeps/unix/sysv/linux/bits/socket.h.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/bits/socket.h (PF_QIPCRTR): New macro.
(PF_MAX): Update value.
(AF_QIPCRTR): New macro.
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.
sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.
Changelog:
* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_ceil-vis3.c): Likewise.
(CFLAGS-s_floorf-vis3.c): Likewise.
(CFLAGS-s_floor-vis3.c): Likewise.
(CFLAGS-s_truncf-vis3.c): Likewise.
(CFLAGS-s_trunc-vis3.c): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
As pointer out on the mailing list, the inline assembly code in
sysdeps/powerpc/ifunc-sel.h doesn't have a list of clobbered registers
and used wrong constraints.
This patch fixes that. I verified it doesn't introduce any change in the
generated code.
Changelog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Add "11", "12", "cr0" to the
clobber list. Use "i" constraint instead of "X".
(ifunc_one): Add "12" to the clobber list. Use "i" constraint instead
of "X".
On 32-bit PowerPC GCC 6 always saves the PIC register on the stack in
the prologue and adjust the stack in the epilogue. It is therefore not
possible anymore to just exit the function in the inline asm code,
otherwise it corrupts the stack pointer. This causes the following tests
to fail when using GCC 6:
FAIL: elf/ifuncmain1
FAIL: elf/ifuncmain1pic
FAIL: elf/ifuncmain1picstatic
FAIL: elf/ifuncmain1pie
FAIL: elf/ifuncmain1staticpic
FAIL: elf/ifuncmain1staticpie
FAIL: elf/ifuncmain1vis
FAIL: elf/ifuncmain1vispic
FAIL: elf/ifuncmain1vispie
FAIL: elf/ifuncmain2pic
FAIL: elf/ifuncmain2picstatic
FAIL: elf/ifuncmain3
FAIL: elf/ifuncmain4picstatic
FAIL: elf/ifuncmain5
FAIL: elf/ifuncmain5picstatic
FAIL: elf/ifuncmain5staticpic
The solution is to replace the beqlr instructions by a beq to the end
of the inline asm code. This fixes all the above failures.
ChangeLog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Replace beqlr instructions
by beq instructions jumping to the end of the function.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
It is necessary to preserve the invariant that if an arena is
on the free list, it has thread attach count zero. Otherwise,
when arena_thread_freeres sees the zero attach count, it will
add it, and without the invariant, an arena could get pushed
to the list twice, resulting in a cycle.
One possible execution trace looks like this:
Thread 1 examines free list and observes it as empty.
Thread 2 exits and adds its arena to the free list,
with attached_threads == 0).
Thread 1 selects this arena in reused_arena (not from the free list).
Thread 1 increments attached_threads and attaches itself.
(The arena remains on the free list.)
Thread 1 exits, decrements attached_threads,
and adds the arena to the free list.
The final step creates a cycle in the usual way (by overwriting the
next_free member with the former list head, while there is another
list item pointing to the arena structure).
tst-malloc-thread-exit exhibits this issue, but it was only visible
with a debugger because the incorrect fix in bug 19243 removed
the assert from get_free_list.
The alpha specific version of trunc and truncf always add and subtract
0x1.0p23 or 0x1.0p52 even for big values. This causes this kind of
errors in the testsuite:
Failure: Test: trunc_towardzero (0x1p107)
Result:
is: 1.6225927682921334e+32 0x1.fffffffffffffp+106
should be: 1.6225927682921336e+32 0x1.0000000000000p+107
difference: 1.8014398509481984e+16 0x1.0000000000000p+54
ulp : 0.5000
max.ulp : 0.0000
Change this by returning the input value when its absolute value is
greater than 0x1.0p23 or 0x1.0p52. NaN have to go through the add and
subtract operations to get possibly silenced.
Finally remove the code to handle inexact exception, trunc should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_trunc.c (__trunc): Return the input value
when its absolute value is greater than 0x1.0p52.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_truncf.c (__truncf): Return the input value
when its absolute value is greater than 0x1.0p23.
[_IEEE_FP_INEXACT] Remove.
The alpha version of rint wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Changelog:
* sysdeps/alpha/fpu/s_rint.c (__rint): Add argument with itself
when it is a NaN.
* sysdeps/alpha/fpu/s_rintf.c (__rintf): Likewise.
The alpha version of floor wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Finally remove the code to handle inexact exception, floor should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_floor.c (__floor): Add argument with itself
when it is a NaN.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_floorf.c (__floorf): Likewise.