This requires defining a macro for the full path, matching the
-Wl,--dynamic-link= arguments used for linking glibc programs,
and ldd script.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This prints out version information for the dynamic loader and
exits immediately, without further command line processing
(which seems to match what some GNU tools do).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
--help processing is deferred to the point where the executable has
been loaded, so that it is possible to eventually include information
from the main executable in the help output.
As suggested in the GNU command-line interface guidelines, the help
message is printed to standard output, and the exit status is
successful.
Handle usage errors closer to the GNU command-line interface
guidelines.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add a comment to elf/Makefile, explaining why we cannot use
config.status for autoconf template processing.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Introduce struct dl_main_state and move it to <dl-main.h>. Rename
enum mode to enum rtld_mode and add the rtld_mode_ prefix to the enum
constants.
This avoids the need for putting state that is only needed during
startup into the ld.so data segment.
In some cases, it is difficult to determine the kind of malloc
based on the execution context, so a function to determine that
is helpful.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The generic version is parallel to _dl_writev. It cannot use
_dl_writev directly because the errno value needs to be obtained
under a lock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some tunable values and their minimum/maximum values must be determinted
at run-time. Add TUNABLE_SET_WITH_BOUNDS and TUNABLE_SET_WITH_BOUNDS_FULL
to update tunable value together with minimum and maximum values.
__tunable_set_val is updated to set tunable value as well as min/max
values.
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Constants double checked against binutils and the ELF for the Arm 64-bit
Architecture (AArch64) Release 2020Q2 document.
Only BTI PLT is used in glibc, there's no PAC PLT with glibc, and people
are expected to use BIND_NOW.
The _sys_errlist and _sys_siglist symbols are deprecated since 2.32.
This patch adds a TEST_COMPAT check around the tests. This fixes test
failures on new architectures (such as RV32) that don't have this
symbol defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Make the computation in elf/dl-tls.c more transparent, and add
an explicit test for the historic value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The auditing interface identifies namespaces by their first loaded
module. Once the namespace is empty, it is no longer possible to signal
LA_ACT_CONSISTENT for it because the first loaded module is already gone
at that point.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
Now that ldconfig defaults to the new format (only), check for it
first. Also apply the corruption check added in commit 2954daf00b
("Add more checks for valid ld.so.cache file (bug 18093)") to the
new-format-only case.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
The existing macros are fragile and expect local variables with a
certain name. Fix this by defining them as functions with default
implementation in a new header dl-runtime.h which arches can override
if need be.
This came up during ARC port review, hence the need for argument pltgot
in reloc_index() which is not needed by existing ports.
This patch potentially only affects hppa/x86 ports,
build tested for both those configs and a few more.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There are:
#define TUNABLE_SET_VAL_IF_VALID_RANGE(__cur, __val, __type) \
({ \
__type min = (__cur)->type.min; \
__type max = (__cur)->type.max; \
\
if ((__type) (__val) >= min && (__type) (val) <= max) \
^^^ Should be __val
{ \
(__cur)->val.numval = val; \
^^^ Should be __val
(__cur)->initialized = true; \
} \
})
Luckily since all TUNABLE_SET_VAL_IF_VALID_RANGE usages are
TUNABLE_SET_VAL_IF_VALID_RANGE (cur, val, int64_t);
this didn't cause any issues.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Historically, this mechanism was used to process "nosegneg"
subdirectories, and it is still used to include the "tls"
subdirectories. With nosegneg support gone from ld.so, this is part
no longer useful.
The entire mechanism is not well-designed because it causes the
meaning of hwcap bits in ld.so.cache to depend on the kernel version
that was used to generate the cache, which makes it difficult to use
this mechanism for anything else in the future.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was only ever used for the "nosegneg" flag. This approach for
passing hardware capability information creates a subtle dependency
between the kernel and userspace, and ld.so.cache contents. It seems
inappropriate for toady, where people expect to be able to run
system images which very different kernel versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change makes it easier to set a breakpoint on these calls.
This also addresses the issue that including <ldsodefs.h> without
<unistd.h> does not result usable _dl_*printf macros because of the
use of the STD*_FILENO macros there.
(The private symbol for _dl_fatal_printf will go away again
once the exception handling implementation is unified between
libc and ld.so.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These property values are specified by the AArch64 ELF ABI and
binutils can create binaries marked with them.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
If we try to run constructors before relocation, this is always
a dynamic linker bug. An assert is easier to notice than a call
via an invalid function pointer (which may not even produce a valid
call stack).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
The second call does not do anything because the data structures have
already been resized by the call that comes before the demarcation
point. Fixes commit a509eb117f
("Avoid late dlopen failure due to scope, TLS slotinfo updates
[BZ #25112]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The rseq initialization should happen only for the libc in the base
namespace (in the dynamic case) or the statically linked libc. The
__libc_multiple_libcs flag does not quite cover this case at present,
so this commit introduces a flag argument to __libc_early_init,
indicating whether the libc being libc is the primary one (of the main
program).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
MIPS needs to ignore certain existing symbols during symbol lookup.
The old scheme uses the ELF_MACHINE_SYM_NO_MATCH macro, with an
inline function, within its own header, with a sysdeps override for
MIPS. This allows re-use of the function from another file (without
having to include <dl-machine.h> or providing the default definition
for ELF_MACHINE_SYM_NO_MATCH).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
GNU ld and gold's -Map include a line like:
path/to/build/libc_pic.a(check_fds.os)
lld -Map does not have the archive member list, but we can still derive the
members from the following output
VMA LMA Size Align Out In Symbol
...
1a1c0 1a1c0 e2 16 path/to/build/libc_pic.a(check_fds.os):(.text)
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All list elements are colon-separated strings, and there is a hard
upper limit for the number of audit modules, so it is possible to
pre-allocate a fixed-size array of strings to which the LD_AUDIT
environment variable and --audit arguments are added.
Also eliminate the global variables for the audit list because
the list is only needed briefly during startup.
There is a slight behavior change: All duplicate LD_AUDIT environment
variables are now processed, not just the last one as before. However,
such environment vectors are invalid anyway.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The ldbl redirects for ieee128 have some jagged edges when
inspecting and manipulating symbols directly.
e.g asprintf is unconditionally redirected to __asprintfieee128
thus any tests relying on GCC's redirect behavior will encounter
problems if they inspect the symbol names too closely.
I've mitigated tests which expose the limitations of the
ldbl -> f128 redirects by giving them knowledge about the
redirected symbol names.
Hopefully there isn't much user code which depends on this
implementation specific behavior.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
With this patch, -v turns on a "from" trace for each directory
searched, that tells you WHY that directory is being searched -
is it a builtin, from the command line, or from some config file?
Writable, executable segments defeat security hardening. The
existing check for DT_TEXTREL does not catch this.
hppa and SPARC currently keep the PLT in an RWX load segment.
The present code leaves the function pointers unprotected, but moves
some of the static functions into .data.rel.ro instead. This causes
the linker to produce an allocatable, executable, writable section
and eventually an RWX load segment. Not only do we really do not
want that, it also breaks valgrind because valgrind does not load
debuginfo from the mmap interceptor if all it sees are RX and RWX
mappings.
Fixes commit 3a0ecccb59 ("ld.so: Do not
export free/calloc/malloc/realloc functions [BZ #25486]").
On !ELF_INITFINI architectures, _init is no longer called by the
dynamic linker. We can use an ELF constructor instead because the
constructor order does not matter. (The other constructors are used
to set up libio vtable bypasses and do not depend on this
initialization routine.)
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
Exporting functions and relying on symbol interposition from libc.so
makes the choice of implementation dependent on DT_NEEDED order, which
is not what some compiler drivers expect.
This commit replaces one magic mechanism (symbol interposition) with
another one (preprocessor-/compiler-based redirection). This makes
the hand-over from the minimal malloc to the full malloc more
explicit.
Removing the ABI symbols is backwards-compatible because libc.so is
always in scope, and the dynamic loader will find the malloc-related
symbols there since commit f0b2132b35
("ld.so: Support moving versioned symbols between sonames
[BZ #24741]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The definitions are moved into a new file, elf/dl-sym-post.h, so that
this code can be used by the dynamic loader as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This generalizes a mechanism used for stack-protector support, so
that it can be applied to other symbols if required.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As the sort was removed, there's no need to keep a separate map of
links. Instead, when relocating objects iterate over l_initfini
directly.
This allows us to remove the loop copying l_initfini elements into
map. We still need a loop to identify the first and last elements that
need relocation.
Tested by running the testsuite on x86_64.
l_initfini is already sorted by dependency in _dl_map_object_deps(),
so avoid sorting again in dl_open_worker().
Tested by running the testsuite on x86_64.
There are two fixes that are needed to be able to dlopen filter
objects. First _dl_map_object_deps cannot assume that map will be at
the beginning of l_searchlist.r_list[], as filtees are inserted before
map. Secondly dl_open_worker needs to ensure that filtees get
relocated.
In _dl_map_object_deps:
* avoiding removing relocation dependencies of map by setting
l_reserved to 0 and otherwise processing the rest of the search
list.
* ensure that map remains at the beginning of l_initfini - the list
of things that need initialisation (and destruction). Do this by
splitting the copy up. This may not be required, but matches the
initialization order without dlopen.
Modify dl_open_worker to relocate the objects in new->l_inifini.
new->l_initfini is constructed in _dl_map_object_deps, and lists the
objects that need initialization and destruction. Originally the list
of objects in new->l_next are relocated. All of these objects should
also be included in new->l_initfini (both lists are populated with
dependencies in _dl_map_object_deps). We can't use new->l_prev to pick
up filtees, as during a recursive dlopen from an interposed malloc
call, l->prev can contain objects that are not ready for relocation.
Add tests to verify that symbols resolve to the filtee implementation
when auxiliary and filter objects are used, both as a normal link and
when dlopen'd.
Tested by running the testsuite on x86_64.
As noted in
<https://sourceware.org/ml/libc-alpha/2019-06/msg00824.html>,
elf/tst-rtld-preload fails when cross-testing because it attempts to
run the test wrapper with itself. Unfortunately, that thread never
resulted in a complete and correct patch for that test.
This patch addresses the issues with that test more thoroughly. The
test is changed not to use the wrapper twice, including updating the
message it prints about the command it runs to be more complete and
accurate after the change; the Makefile is changed not to pass the
redundant '$(test-wrapper)' argument.
Tested for Arm that this fixes the failure seen for that test in
cross-testing.
The tests elf/tst-ifunc-fault-bindnow and elf/tst-ifunc-fault-lazy
fail in cross-testing because they run the dynamic linker directly
without using the test wrapper. This patch fixes them to use the test
wrapper instead.
Tested that this fixes the failure of those two tests for powerpc
soft-float.
GCC 10.0 enabled -fno-common by default and this started to point that
__cache_line_size had been implemented in 2 different places: loader and
libc.
In order to avoid this duplication, the libc variable has been removed
and the loader variable is moved to rtld_global_ro.
File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order
to reuse code for both static and dynamic linking scenarios.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Without CET, a jump into a newly loaded object through an overwritten
link map often does not crash, it just executes some random code.
CET detects this in some cases because the function pointer does not
point to the start of a function in the replacement shared object,
so there is no ENDBR instruction.
The new test uses a small shared object and the existing dangling
link map to trigger the bug.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We should clear GL(dl_initfirst) when freeing its link_map memory.
Tested on Fedora 31/x86-64 with CET.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This new test was introduced with recent commit
591236f1a3.
If run on 32bit, it fails while renaming tst-ldconfig-ld-mod.so as there is no
/usr/lib64 directory. This patch is constructing the file name with help of
support_libdir_prefix.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Test ldconfig after /etc/ld.so.conf update and verify a running process
observes changes to /etc/ld.so.cache.
The test uses the test-in-container framework.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The code is similar to the one at elf/dl-reloc.c, where it checks for
the l_relro_size from the link_map (obtained from PT_GNU_RELRO header
from program headers) and calls_dl_protected_relro.
For testing I will use the ones proposed by Florian's patch
'elf: Add tests for working RELRO protection' [1].
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
aarch64-linux-gnu, s390x-linux-gnu, and sparc64-linux-gnu. I also
check with --enable-static pie on x86_64-linux-gnu, i686-linux-gnu,
and aarch64-linux-gnu which seems the only architectures where
static PIE is actually working (as per 9d7a3741c9, on
arm-linux-gnueabihf, powerpc64{le}-linux-gnu, and s390x-linux-gnu
I am seeing runtime issues not related to my patch).
[1] https://sourceware.org/ml/libc-alpha/2019-10/msg00059.html
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
Previously, ld.so was invoked only with the elf subdirectory on the
library search path. Since the soname link for libc.so only exists in
the top-level build directory, this leaked the system libc into the
test.
Blocking signals causes issues with certain anti-malware solutions
which rely on an unblocked SIGSYS signal for system calls they
intercept.
This reverts commit a2e8aa0d9e
("Block signals during the initial part of dlopen") and adds
comments related to async signal safety to active_nodelete and
its caller.
Note that this does not make lazy binding async-signal-safe with regards
to dlopen. It merely avoids introducing new async-signal-safety hazards
as part of the NODELETE changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Commit a2e8aa0d9e ("Block signals during
the initial part of dlopen") was deemed necessary because of
read-modify-write operations like the one in add_dependency in
elf/dl-lookup.c. In the old code, we check for any kind of NODELETE
status and bail out:
/* Redo the NODELETE check, as when dl_load_lock wasn't held
yet this could have changed. */
if (map->l_nodelete != link_map_nodelete_inactive)
goto out;
And then set pending status (during relocation):
if (flags & DL_LOOKUP_FOR_RELOCATE)
map->l_nodelete = link_map_nodelete_pending;
else
map->l_nodelete = link_map_nodelete_active;
If a signal arrives during relocation and the signal handler, through
lazy binding, adds a global scope dependency on the same map, it will
set map->l_nodelete to link_map_nodelete_active. This will be
overwritten with link_map_nodelete_pending by the dlopen relocation
code.
To avoid such problems in relation to the l_nodelete member, this
commit introduces two flags for active NODELETE status (irrevocable)
and pending NODELETE status (revocable until activate_nodelete is
invoked). As a result, NODELETE processing in dlopen does not
introduce further reasons why lazy binding from signal handlers
is unsafe during dlopen, and a subsequent commit can remove signal
blocking from dlopen.
This does not address pre-existing issues (unrelated to the NODELETE
changes) which make lazy binding in a signal handler during dlopen
unsafe, such as the use of malloc in both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The assumption behind the assert in activate_nodelete was wrong:
Inconsistency detected by ld.so: dl-open.c: 459: activate_nodelete:
Assertion `!imap->l_init_called || imap->l_type != lt_loaded' failed! (edit)
It can happen that an already-loaded object that is in the local
scope is promoted to NODELETE status, via binding to a unique
symbol.
Similarly, it is possible that such NODELETE promotion occurs to
an already-loaded object from the global scope. This is why the
loop in activate_nodelete has to cover all objects in the namespace
of the new object.
In do_lookup_unique, it could happen that the NODELETE status of
an already-loaded object was overwritten with a pending NODELETE
status. As a result, if dlopen fails, this could cause a loss of
the NODELETE status of the affected object, eventually resulting
in an incorrect unload.
Fixes commit f63b73814f ("Remove all
loaded objects if dlopen fails, ignoring NODELETE [BZ #20839]").
Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
This commit adds missing skip_ifunc checks to aarch64, arm, i386,
sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC
resolvers do not run in various diagnostic modes of the dynamic
loader.
Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
This reverts the non-test change from commit d0093c5cef
("Call _dl_open_check after relocation [BZ #24259]"), given that
the underlying bug has been fixed properly in commit 61b74477fa7f63
("Remove all loaded objects if dlopen fails, ignoring NODELETE
[BZ #20839]").
Tested on x86-64-linux-gnu, with and without --enable-cet.
Change-Id: I995a6cfb89f25d2b0cf5e606428c2a93eb48fc33
Lazy binding in a signal handler that interrupts a dlopen sees
intermediate dynamic linker state. This has likely been always
unsafe, but with the new pending NODELETE state, this is clearly
incorrect. Other threads are excluded via the loader lock, but the
current thread is not. Blocking signals until right before ELF
constructors run is the safe thing to do.
Change-Id: Iad079080ebe7442c13313ba11dc2797953faef35
This introduces a “pending NODELETE” state in the link map, which is
flipped to the persistent NODELETE state late in dlopen, via
activate_nodelete. During initial relocation, symbol binding
records pending NODELETE state only. dlclose ignores pending NODELETE
state. Taken together, this results that a partially completed dlopen
is rolled back completely because new NODELETE mappings are unloaded.
Tested on x86_64-linux-gnu and i386-linux-gnu.
Change-Id: Ib2a3d86af6f92d75baca65431d74783ee0dbc292
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Tested on x86_64-linux-gnu.
Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
The call to add_to_global in dl_open_worker happens after running ELF
constructors for new objects. At this point, proper recovery from
malloc failure would be quite complicated: We would have to run the
ELF destructors and close all opened objects, something that we
currently do not do.
Instead, this change splits add_to_global into two phases,
add_to_global_resize (which can raise an exception, called before ELF
constructors run), and add_to_global_update (which cannot, called
after ELF constructors). A complication arises due to recursive
dlopen: After the inner dlopen consumes some space, the pre-allocation
in the outer dlopen may no longer be sufficient. A new member in the
namespace structure, _ns_global_scope_pending_adds keeps track of the
maximum number of objects that need to be added to the global scope.
This enables the inner add_to_global_resize call to take into account
the needs of an outer dlopen.
Most code in the dynamic linker assumes that the number of global
scope entries fits into an unsigned int (matching the r_nlist member
of struct r_scop_elem). Therefore, change the type of
_ns_global_scope_alloc to unsigned int (from size_t), and add overflow
checks.
Change-Id: Ie08e2f318510d5a6a4bcb1c315f46791b5b77524
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Change-Id: I6b1addfe2e30f50a1781595f046f44173db9491a
Obtaining the link map is potentially very slow because it requires
iterating over all loaded objects in the current implementation. If
the caller supplied an explicit handle (i.e., not one of the RTLD_*
constants), the dlsym implementation does not need the identity of the
caller (except in the special case of auditing), so this change
avoids computing it in that case.
Even in the minimal case (dlsym called from a main program linked with
-dl), this shows a small speedup, perhaps around five percent. The
performance improvement can be arbitrarily large in principle (if
_dl_find_dso_for_object has to iterate over many link maps).
Change-Id: Ide5d9e2cc7ac25a0ffae8fb4c26def0c898efa29
In GCC 10, the default at -O2 is now -ftree-loop-distribute-patterns.
This optimization causes GCC to "helpfully" convert the hand-written
loop in _dl_start into a call to memset, which is not available that
early in program startup. Similar problems in other places in GLIBC
have been addressed by explicitly building with
-fno-tree-loop-distribute-patterns, but this one may have been
overlooked previously because it only affects targets where
HAVE_BUILTIN_MEMSET is not defined.
This patch fixes a bug observed on nios2-linux-gnu target that caused
all programs to segv on startup.
This will allow changes in dependency processing during non-lazy
binding, for more precise processing of NODELETE objects: During
initial relocation in dlopen, the fate of NODELETE objects is still
unclear, so objects which are depended upon by NODELETE objects
cannot immediately be marked as NODELETE.
Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
In some cases, it is necessary to introduce noexcept regions
where raised dynamic loader exceptions (e.g., from lazy binding)
are fatal, despite being nested in a code region with an active
exception handler. This change enhances _dl_catch_exception with
to provide such a capability. The existing function is reused,
so that it is not necessary to introduce yet another function with
a similar purpose.
Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
Only one of the currently defined flags is incompatible with versioned
symbol lookups, so it makes sense to check for that flag and not its
complement.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Change-Id: I3384349cef90cfd91862ebc34a4053f0c0a99404
From the beginning, elf/tst-dlopen-aout has exercised two different
bugs: (a) failure to report errors for a dlopen of the executable
itself in some cases (bug 24900) and (b) incorrect rollback of the
TLS modid allocation in case of a dlopen failure (bug 16634).
This commit replaces the test with elf/tst-dlopen-self for (a) and
elf/tst-dlopen-tlsmodid for (b). The latter tests use the
elf/tst-dlopen-self binaries (or iconv) with dlopen, so they are
no longer self-dlopen tests.
Tested on x86_64-linux-gnu and i686-linux-gnu, with a toolchain that
does not default to PIE.
Commit a42faf59d6 ("Fix BZ #16634.")
attempted to fix a TLS modid consistency issue by adding additional
checks to the open_verify function. However, this is fragile
because open_verify cannot reliably predict whether
_dl_map_object_from_fd will later fail in the more complex cases
(such as memory allocation failures). Therefore, this commit
assigns the TLS modid as late as possible. At that point, the link
map pointer will eventually be passed to _dl_close, which will undo
the TLS modid assignment.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
If the loader is invoked explicitly and loads the main executable,
it stores the file ID of the main executable in l_file_id. This
information is not available if the main excutable is loaded by the
kernel, so this is another case where the two cases differ.
This enhances commit 23d2e5faf0
("elf: Self-dlopen failure with explict loader invocation
[BZ #24900]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
This patch is a reimplementation of [1], which was submitted back in
2015. Copyright issue has been sorted [2] last year. It proposed a new
section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new
section would be virtually identical to the existing .gnu.hash except
for the translation table (xlat) which would contain correct MIPS
.dynsym indexes corresponding to the hashvals in chains. This is because
MIPS ABI imposes a different ordering of the dynsyms than the one
expected by the .gnu.hash section. Another addition would be a leading
word at the beggining of the section, which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue reported in [3] which is caused
by the leading word of the .MIPS.xhash section. Leading word is now
removed in the corresponding binutils patch, and the number of entries
in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag.
Since the MIPS specific dl-lookup.c file was removed following the
initial patch submission, I opted for the definition of three new macros
in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the
index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is
used to calculate the index of a symbol in GNU hash. On MIPS, it is
defined to look up the symbol index in the translation table.
ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the
.MIPS.xhash pointer in the link_map_machine struct.
The other major change is bumping the highest EI_ABIVERSION value for
MIPS to suggest that the dynamic linker now supports GNU hash.
The patch was tested by running the glibc testsuite for the three MIPS
ABIs (o32, n32 and n64) and for x86_64-linux-gnu.
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
* elf/dl-addr.c (determine_info): Calculate the symbol index
using the newly defined ELF_MACHINE_HASH_SYMIDX macro.
* elf/dl-lookup.c (do_lookup_x): Ditto.
(_dl_setup_hash): Initialize MIPS xhash translation table.
* elf/elf.h (SHT_MIPS_XHASH): New define.
(DT_MIPS_XHASH): New define.
* sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/linkmap.h (struct link_map_machine): New member.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI
version.
* sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
In case of an explicit loader invocation, ld.so essentially performs
a dlopen call to load the main executable. Since the pathname of
the executable is known at this point, it gets stored in the link
map. In regular mode, the pathname is not known and "" is used
instead.
As a result, if a program calls dlopen on the pathname of the main
program, the dlopen call succeeds and returns a handle for the main
map. This results in an unnecessary difference between glibc
testing (without --enable-hardcoded-path-in-tests) and production
usage.
This commit discards the names when building the link map in
_dl_new_object for the main executable, but it still determines
the origin at this point in case of an explict loader invocation.
The reason is that the specified pathname has to be used; the kernel
has a different notion of the main executable.
dlopen can no longer open PIE binaries, so it is not necessary
to link the executable as non-PIE to trigger a dlopen failure.
If we hard-code the path to the real executable, we can run the test
with and without hard-coded paths because the dlopen path will not
be recognized as the main program in both cases. (With an explict
loader invocation, the loader currently adds argv[0] to l_libname
for the main map and the dlopen call suceeds as a result; it does
not do that in standard mode.)
This change should be fully backwards-compatible because the old
code aborted the load if a soname mismatch was encountered
(instead of searching further for a matching symbol). This means
that no different symbols are found.
The soname check was explicitly disabled for the skip_map != NULL
case. However, this only happens with dl(v)sym and RTLD_NEXT,
and those lookups do not come with a verneed entry that could be used
for the check.
The error check was already explicitly disabled for the skip_map !=
NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But
_dl_vsym always sets filename in the struct r_found_version argument
to NULL, so the check was not active anyway. This means that
symbol lookup results for the skip_map != NULL case do not change,
either.
STO_AARCH64_VARIANT_PCS is a non-visibility st_other flag for marking
symbols that reference functions that may follow a variant PCS with
different register usage convention from the base PCS.
DT_AARCH64_VARIANT_PCS is a dynamic tag that marks ELF modules that
have R_*_JUMP_SLOT relocations for symbols marked with
STO_AARCH64_VARIANT_PCS (i.e. have variant PCS calls via a PLT).
* elf/elf.h (STO_AARCH64_VARIANT_PCS): Define.
(DT_AARCH64_VARIANT_PCS): Define.
This test corrupts /var/cache/ldconfig/aux-cache and executes ldconfig
to check it will not segfault using the corrupted aux_cache. The test
uses the test-in-container framework. Verified no regressions on
x86_64.
This patch adds the new NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS from
Linux 5.1 to glibc's elf.h.
Tested for x86_64.
* elf/elf.h (NT_ARM_PACA_KEYS): New macro.
(NT_ARM_PACG_KEYS): Likewise.
Use a new libsupport support_bindir_prefix instead of a hardcoded
/usr/bin to create the pldd path on container directory.
Checked on x86_64-linux-gnu with default and non-default --prefix and
--bindir paths, as well with --enable-hardcoded-path-in-tests.
[BZ #24544]
* elf/tst-pldd.c (do_test): Use support_bindir_prefix instead of
pre-defined value.
Reviewed-by: DJ Delorie <dj@redhat.com>
The elf/tst-pldd (added by 1a4c27355e to fix BZ#18035) test does
not expect the hardcoded paths that are output by pldd when the test
is built with --enable-hardcoded-path-in-tests. Instead of showing
the ABI installed library names for loader and libc (such as
ld-linux-x86-64.so.2 and libc.so.6 for x86_64), pldd shows the default
built ld.so and libc.so.
It makes the tests fail with an invalid expected loader/libc name.
This patch fixes the elf-pldd test by adding the canonical ld.so and
libc.so names in the expected list of possible outputs when parsing
the result output from pldd. The test now handles both default
build and --enable-hardcoded-path-in-tests option.
Checked on x86_64-linux-gnu (built with and without
--enable-hardcoded-path-in-tests) and i686-linux-gnu.
* elf/tst-pldd.c (in_str_list): New function.
(do_test): Add default names for ld and libc as one option.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The audit module itself can be linked with BIND_NOW; it does not
affect its functionality.
This should complete the leftovers from commit
2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]").
Since 9182aa6799 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map
for executable itself and loader will have both l_name and l_libname->name
holding the same value due:
elf/dl-object.c
95 new->l_name = *realname ? realname : (char *) newname->name + libname_len - 1;
Since newname->name points to new->l_libname->name.
This leads to pldd to an infinite call at:
elf/pldd-xx.c
203 again:
204 while (1)
205 {
206 ssize_t n = pread64 (memfd, tmpbuf.data, tmpbuf.length, name_offset);
228 /* Try the l_libname element. */
229 struct E(libname_list) ln;
230 if (pread64 (memfd, &ln, sizeof (ln), m.l_libname) == sizeof (ln))
231 {
232 name_offset = ln.name;
233 goto again;
234 }
Since the value at ln.name (l_libname->name) will be the same as previously
read. The straightforward fix is just avoid the check and read the new list
entry.
I checked also against binaries issues with old loaders with fix for BZ#387,
and pldd could dump the shared objects.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
[BZ #18035]
* elf/Makefile (tests-container): Add tst-pldd.
* elf/pldd-xx.c: Use _Static_assert in of pldd_assert.
(E(find_maps)): Avoid use alloca, use default read file operations
instead of explicit LFS names, and fix infinite loop.
* elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers.
(get_process_info): Use _Static_assert instead of assert, use default
directory operations instead of explicit LFS names, and free some
leadek pointers.
* elf/tst-pldd.c: New file.
This patch refactor how hp-timing is used on loader code for statistics
report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
HP_TIMING_INLINE.
* nptl/descr.h: Likewise.
* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
Abstract hp-timing usage with RTLD_* macros.
* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
HP_TIMING_NONAVAIL): Likewise.
* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/generic/hp-timing-common.h: Update comment with
HP_TIMING_AVAIL removal.
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
Starting with commit 1616d034b6
the output was corrupted on some platforms as _dl_procinfo
was called for every auxv entry and on some architectures like s390
all entries were represented as "AT_HWCAP".
This patch is removing the condition and let _dl_procinfo decide if
an entry is printed in a platform specific or generic way.
This patch also adjusts all _dl_procinfo implementations which assumed
that they are only called for AT_HWCAP or AT_HWCAP2. They are now just
returning a non-zero-value for entries which are not handled platform
specifc.
ChangeLog:
* elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always
call _dl_procinfo.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo):
Ignore types other than AT_HWCAP.
* sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo):
Likewise.
* sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment
in the case of falling back to generic output mechanism.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo):
Likewise.
This patch adds some defines relate to machine flag and section information,
which is used by elfutils elflint check. A C-SKY typo is also fixed with
this patch.
* elf/elf.h (EF_CSKY_ABIMASK, EF_CSKY_OTHER, EF_CSKY_PROCESSOR)
(EF_CSKY_ABIV1, EF_CSKY_ABIV2, SHT_CSKY_ATTRIBUTES): New defines.
It is possible that the link editor injects an allocated ABI tag note
before the artificial, allocated large note in the test. Note parsing
in open_verify stops when the first ABI tag note is encountered, so if
the ABI tag note comes first, the problematic code is not actually
exercised.
Also tweak the artificial note so that it is a syntactically valid
4-byte aligned note, in case the link editor tries to parse notes and
process them.
Improves the testing part of commit 0065aaaaae.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The existing tests all use global symbols (but with different
visibility). Local symbols could be treated differently by the
compiler and linker (as was the case on POWER ELFv2, causing
bug 23937), and we did not have test coverage for this.
Tested on x86-64 and POWER ELFv2 little-endian, with and without
--disable-multi-arch. On POWER, the test cases elf/ifuncmain9,
elf/ifuncmain9pic, elf/ifuncmain9pie reproduce bug 23937 with older
binutils.
We should run IFUNC tests with --disable-multi-arch if the toolchain
supports IFUNCs. For correctness, --disable-multi-arch must not
remove IFUNC support from the loader.
Tested on x86-64, x32 and i686 with and without --disable-multi-arch.
* configure.ac (have-ifunc): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* elf/Makefile: Run IFUNC tests if binutils supports IFUNC.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
This change moves the audit module loading and early notification into
separate functions out of dl_main.
It restores the bug fix from commit
8e889c5da3 ("elf: Fix LD_AUDIT for
modules with invalid version (BZ#24122)") which was reverted in commit
83e6b59625 ("[elf] Revert 8e889c5da3
(BZ#24122)").
The actual bug fix is the separate error message for the case when
la_version returns zero. The dynamic linker error message (which is
NULL in this case) is no longer used. Based on the intended use of
version zero (ignore this module due to explicit request), the message
is only printed if debugging is enabled.
This patch adds fall-through comments in some cases where -Wextra
produces implicit-fallthrough warnings.
The patch is non-exhaustive. Apart from architecture-specific code
for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy
code, probably should have such changes, but left to be dealt with
separately), or places that already had comments about the
fall-through but not matching the form expected by
-Wimplicit-fallthrough=3 (the default level with -Wextra; my
inclination is to adjust those comments to match rather than
downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one
place where I thought the implicit fallthrough was not correct and so
should be handled separately as a bug fix. I think the key thing to
consider in review of this patch is whether the fall-through is indeed
intended and correct in each place where such a comment is added.
Tested for x86_64.
* elf/dl-exception.c (_dl_exception_create_format): Add
fall-through comments.
* elf/ldconfig.c (parse_conf_include): Likewise.
* elf/rtld.c (print_statistics): Likewise.
* locale/programs/charmap.c (parse_charmap): Likewise.
* misc/mntent_r.c (__getmntent_r): Likewise.
* posix/wordexp.c (parse_arith): Likewise.
(parse_backtick): Likewise.
* resolv/ns_ttl.c (ns_parse_ttl): Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
One group of warnings seen with -Wextra is warnings for static or
inline not at the start of a declaration (-Wold-style-declaration).
This patch fixes various such cases for inline, ensuring it comes at
the start of the declaration (after any static). A common case of the
fix is "static inline <type> __always_inline"; the definition of
__always_inline starts with __inline, so the natural change is to
"static __always_inline <type>". Other cases of the warning may be
harder to fix (one pattern is a function definition that gets
rewritten to be static by an including file, "#define funcname static
wrapped_funcname" or similar), but it seems worth fixing these cases
with inline anyway.
Tested for x86_64.
* elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline
before return type, without separate inline.
* elf/dl-tunables.c (maybe_enable_malloc_check): Likewise.
* elf/dl-tunables.h (tunable_is_name): Likewise.
* malloc/malloc.c (do_set_trim_threshold): Likewise.
(do_set_top_pad): Likewise.
(do_set_mmap_threshold): Likewise.
(do_set_mmaps_max): Likewise.
(do_set_mallopt_check): Likewise.
(do_set_perturb_byte): Likewise.
(do_set_arena_test): Likewise.
(do_set_arena_max): Likewise.
(do_set_tcache_max): Likewise.
(do_set_tcache_count): Likewise.
(do_set_tcache_unsorted_limit): Likewise.
* nis/nis_subr.c (count_dots): Likewise.
* nptl/allocatestack.c (advise_stack_range): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise.
(do_sin): Likewise.
(reduce_sincos): Likewise.
(do_sincos): Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c
(do_set_elision_enable): Likewise.
(TUNABLE_CALLBACK_FNDECL): Likewise.
Add support for AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE,
AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY when
LD_SHOW_AUXV=1.
AT_L*_CACHESIZE is printed as decimal and represent the number of
bytes of the cache.
AT_L*_CACHEGEOMETRY is treated in order to specify the cache line size
and its associativity.
Example output from a POWER8:
AT_L1I_CACHESIZE: 32768
AT_L1I_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L1D_CACHESIZE: 65536
AT_L1D_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L2_CACHESIZE: 524288
AT_L2_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L3_CACHESIZE: 8388608
AT_L3_CACHEGEOMETRY: 128B line size, 8-way set associative
Some of the new types are longer than the previous ones, requiring to
increase the indentation in order to keep the values aligned.
* elf/dl-sysdep.c (auxvars): Add AT_L1I_CACHESIZE,
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY,
AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and
AT_L3_CACHEGEOMETRY. Fix indentation when printing the other
fields.
(_dl_show_auxv): Give a special treatment to
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY
and AT_L3_CACHEGEOMETRY.
* sysdeps/powerpc/dl-procinfo.h (cache_geometry): New function.
(_dl_procinfo): Fix indentation when printing AT_HWCAP and
AT_HWCAP2. Add support for AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
There is a data-dependency between the fields of struct l_reloc_result
and the field used as the initialization guard. Users of the guard
expect writes to the structure to be observable when they also observe
the guard initialized. The solution for this problem is to use an acquire
and release load and store to ensure previous writes to the structure are
observable if the guard is initialized.
The previous implementation used DL_FIXUP_VALUE_ADDR (l_reloc_result->addr)
as the initialization guard, making it impossible for some architectures
to load and store it atomically, i.e. hppa and ia64, due to its larger size.
This commit adds an unsigned int to l_reloc_result to be used as the new
initialization guard of the struct, making it possible to load and store
it atomically in all architectures. The fix ensures that the values
observed in l_reloc_result are consistent and do not lead to crashes.
The algorithm is documented in the code in elf/dl-runtime.c
(_dl_profile_fixup). Not all data races have been eliminated.
Tested with build-many-glibcs and on powerpc, powerpc64, and powerpc64le.
[BZ #23690]
* elf/dl-runtime.c (_dl_profile_fixup): Guarantee memory
modification order when accessing reloc_result->addr.
* include/link.h (reloc_result): Add field init.
* nptl/Makefile (tests): Add tst-audit-threads.
(modules-names): Add tst-audit-threads-mod1 and
tst-audit-threads-mod2.
Add rules to build tst-audit-threads.
* nptl/tst-audit-threads-mod1.c: New file.
* nptl/tst-audit-threads-mod2.c: Likewise.
* nptl/tst-audit-threads.c: Likewise.
* nptl/tst-audit-threads.h: Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add support for %x, %lx and %zx to _dl_exception_create_format and pad
to the full width with 0.
* elf/Makefile (tests-internal): Add tst-create_format1.
* elf/dl-exception.c (_dl_exception_create_format): Support
%x, %lx and %zx.
* elf/tst-create_format1.c: New file.
Mark the ra register as undefined in _start, so that unwinding through
main works correctly. Also, don't use a tail call so that ra points after
the call to __libc_start_main, not after the previous call.
This patch adds NT_MIPS_DSP and NT_MIPS_FP_MODE from Linux 4.19 to
elf.h.
Tested for x86_64.
* elf/elf.h (NT_MIPS_DSP): New macro.
(NT_MIPS_FP_MODE): Likewise.
Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or
DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments
with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads
to segfault when performing IFUNC resolution (which requires PROT_EXEC
as well for the IFUNC resolver).
This patch makes it call __mprotect with extra PROT_WRITE bit, which
will keep the PROT_EXEC bit if exists, and thus fixes the segfault.
FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf.
Adam J. Richte <adam_richter2004@yahoo.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fangrui Song <maskray@google.com>
[BZ #20480]
* config.h.in (CAN_TEXTREL_IFUNC): New define.
* configure.ac: Add check if linker supports textrel relocation with
ifunc.
* elf/dl-reloc.c (_dl_relocate_object): Use all required flags on
DT_TEXTREL segments, not only PROT_READ and PROT_WRITE.
* elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel.
(CFLAGS-tst-ifunc-textrel.c): New rule.
* elf/tst-ifunc-textrel.c: New file.
I'm testing a patch to let the compiler expand calls to floor in libm
as built-in function calls as much as possible, instead of calling
__floor, so that no architecture-specific __floor inlines are needed,
and then to arrange for non-inlined calls to end up calling __floor,
as done with sqrt and __ieee754_sqrt.
This shows up elf/tst-relsort1mod2.c calling floor, which must not be
converted to a call to __floor. Now, while an IS_IN (libm)
conditional could be added to the existing conditionals on such
redirections in include/math.h, the _ISOMAC conditional ought to
suffice (code in other glibc libraries shouldn't be calling floor or
sqrt anyway, as they aren't provided in libc and the other libraries
don't link with libm). But while tests are mostly now built with
_ISOMAC defined, test modules in modules-names aren't unless also
listed in modules-names-tests.
As far as I can see, all the modules in modules-names in elf/ are in
fact parts of tests and so listing them in modules-names-tests is
appropriate, so they get built with something closer to the headers
used for user code, except in a few cases that actually rely on
something from internal headers. This patch duly sets
modules-names-tests there accordingly (filtering out those tests that
fail to build without internal headers).
Tested for x86_64, and with build-many-glibcs.py.
* elf/Makefile (modules-names-tests): New variable.
The elf/tst-dlopen-aout.c test uses asserts to verify properties of the
test execution. Instead of using assert it should use xpthread_create
and xpthread_join to catch errors starting the threads and fail the
test. This shows up in Fedora 28 when building for i686-pc-linux-gnu
and using gcc 8.1.1.
Tested on i686, and fixes a check failure with -DNDEBUG.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This patch adds two new constants from Linux 4.18 to elf.h,
NT_VMCOREDD and AT_MINSIGSTKSZ.
Tested for x86_64.
* elf/elf.c (NT_VMCOREDD): New macro.
(AT_MINSIGSTKSZ): Likewise.
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* scripts/check-execstack.awk: Consider `xfail' variable containing a
list
of libraries whose stack executability is expected.
* elf/Makefile ($(objpfx)check-execstack.out): Pass
$(check-execstack-xfail) to check-execstack.awk through `xfail'
variable.
* sysdeps/mach/hurd/i386/Makefile (check-execstack-xfail): Set to ld.so
libc.so libpthread.so.
Intel Control-flow Enforcement Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en
forcement-technology-preview.pdf
includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK).
GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to
indicate that all executable sections are compatible with IBT when
ENDBR instruction starts each valid target where an indirect branch
instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on
output only if it is set on all relocatable inputs.
On an IBT capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable IBT and
lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable.
2. When loading an executable with an interpreter, enable IBT if
GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable,
disable IBT.
b. Lock IBT.
3. If IBT is enabled, when loading a shared object without
GNU_PROPERTY_X86_FEATURE_1_IBT:
a. If legacy interwork is allowed, then mark all pages in executable
PT_LOAD segments in legacy code page bitmap. Failure of legacy code
page bitmap allocation causes an error.
b. If legacy interwork isn't allowed, it causes an error.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to
indicate that all executable sections are compatible with SHSTK where
return address popped from shadow stack always matches return address
popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK
on output only if it is set on all relocatable inputs.
On a SHSTK capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable.
2. When loading an executable with an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable
or any shared objects loaded via the DT_NEEDED tag, disable SHSTK.
b. Otherwise lock SHSTK.
3. After SHSTK is enabled, it is an error to load a shared object
without GNU_PROPERTY_X86_FEATURE_1_SHSTK.
To enable CET support in glibc, --enable-cet is required to configure
glibc. When CET is enabled, both compiler and assembler must support
CET. Otherwise, it is a configure-time error.
To support CET run-time control,
1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate
if IBT or SHSTK are enabled at run-time. It should be initialized by
init_cpu_features.
2. For dynamic executables:
a. A l_cet field is added to struct link_map to indicate if IBT or
SHSTK is enabled in an ELF module. _dl_process_pt_note or
_rtld_process_pt_note is called to process PT_NOTE segment for
GNU program property and set l_cet.
b. _dl_open_check is added to check IBT and SHSTK compatibilty when
dlopening a shared object.
3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with
_dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if
SHSTK is enabled.
CET run-time control can be changed via GLIBC_TUNABLES with
$ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off]
$ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off]
1. permissive: SHSTK is disabled when dlopening a legacy ELF module.
2. on: IBT or SHSTK are always enabled, regardless if there are IBT or
SHSTK bits in GNU program property.
3. off: IBT or SHSTK are always disabled, regardless if there are IBT or
SHSTK bits in GNU program property.
<cet.h> from CET-enabled GCC is automatically included by assembly codes
to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK
to GNU program property. _CET_ENDBR is added at the entrance of all
assembly functions whose address may be taken. _CET_NOTRACK is used to
insert NOTRACK prefix with indirect jump table to support IBT. It is
defined as notrack when _CET_NOTRACK is defined in <cet.h>.
[BZ #21598]
* configure.ac: Add --enable-cet.
* configure: Regenerated.
* elf/Makefille (all-built-dso): Add a comment.
* elf/dl-load.c (filebuf): Moved before "dynamic-link.h".
Include <dl-prop.h>.
(_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE
segment.
* elf/dl-open.c: Include <dl-prop.h>.
(dl_open_worker): Call _dl_open_check.
* elf/rtld.c: Include <dl-prop.h>.
(dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call
_rtld_main_check.
* sysdeps/generic/dl-prop.h: New file.
* sysdeps/i386/dl-cet.c: Likewise.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise.
* sysdeps/x86/cet-tunables.h: Likewise.
* sysdeps/x86/check-cet.awk: Likewise.
* sysdeps/x86/configure: Likewise.
* sysdeps/x86/configure.ac: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
* sysdeps/x86/dl-procruntime.c: Likewise.
* sysdeps/x86/dl-prop.h: Likewise.
* sysdeps/x86/libc-start.h: Likewise.
* sysdeps/x86/link_map.h: Likewise.
* sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
(_dl_runtime_resolve_shstk): New.
(_dl_runtime_profile_shstk): Likewise.
* sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet
if CET is enabled.
(CFLAGS-.o): Add -fcf-protection if CET is enabled.
(CFLAGS-.os): Likewise.
(CFLAGS-.op): Likewise.
(CFLAGS-.oS): Likewise.
(asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET
is enabled.
(tests-special): Add $(objpfx)check-cet.out.
(cet-built-dso): New.
(+$(cet-built-dso:=.note)): Likewise.
(common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note).
($(objpfx)check-cet.out): New.
(generated): Add check-cet.out.
* sysdeps/x86/cpu-features.c: Include <dl-cet.h> and
<cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New prototype.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
(init_cpu_features): Call get_cet_status to check CET status
and update dl_x86_feature_1 with CET status. Call
TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK
(set_x86_shstk). Disable and lock CET in libc.a.
* sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New function.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
* sysdeps/x86/sysdep.h (_CET_NOTRACK): New.
(_CET_ENDBR): Define if not defined.
(ENTRY): Add _CET_ENDBR.
* sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and
x86_shstk.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
We have this condition in `check_match' (in elf/dl-lookup.c):
if (__glibc_unlikely ((sym->st_value == 0 /* No value. */
&& stt != STT_TLS)
|| ELF_MACHINE_SYM_NO_MATCH (sym)
|| (type_class & (sym->st_shndx == SHN_UNDEF))))
return NULL;
which causes all !STT_TLS symbols whose value is zero to be silently
ignored in lookup. This may make sense for regular symbols, however not
for absolute (SHN_ABS) ones, where zero is like any value, there's no
special meaning attached to it.
Consequently legitimate programs fail, for example taking the
`elf/tst-absolute-sym' test case, substituting 0 for 0x55aa in
`elf/tst-absolute-sym-lib.lds' and then trying to run the resulting
program we get this:
$ .../elf/tst-absolute-sym
.../elf/tst-absolute-sym: symbol lookup error: .../elf/tst-absolute-sym-lib.so: undefined symbol: absolute
$
even though the symbol clearly is there:
$ readelf --dyn-syms .../elf/tst-absolute-sym-lib.so | grep '\babsolute\b'
7: 00000000 0 NOTYPE GLOBAL DEFAULT ABS absolute
$
The check for the zero value has been there since forever or commit
d66e34cd4234/08162fa88891 ("Implemented runtime dynamic linker to
support ELF shared libraries.") dating back to May 2nd 1995, and the
problem triggers regardless of commit e7feec374c ("elf: Correct
absolute (SHN_ABS) symbol run-time calculation [BZ #19818]") being
present or not.
Fix the issue then, by permitting `sym->st_value' to be 0 for SHN_ABS
symbols in lookup.
[BZ #23307]
* elf/dl-lookup.c (check_match): Do not reject a symbol whose
`st_value' is 0 if `st_shndx' is SHN_ABS.
* elf/tst-absolute-zero.c: New file.
* elf/tst-absolute-zero-lib.c: New file.
* elf/tst-absolute-zero-lib.lds: New file.
* elf/Makefile (tests): Add `tst-absolute-zero'.
(modules-names): Add `tst-absolute-zero-lib'.
(LDLIBS-tst-absolute-zero-lib.so): New variable.
($(objpfx)tst-absolute-zero-lib.so): New dependency.
($(objpfx)tst-absolute-zero: New dependency.
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
The function comment suggests that _dl_map_object_deps cannot use
malloc, but it already allocates the l_initfini array on the heap, so
the additional allocation should be acceptable.
The BPF ELF format has new relocation types R_BPF_64_64 and R_BPF_64_32.
The existing R_BPF_MAP_FD was an extension that never got implemented.
Remove it, because the constant conflicts with the official R_BPF_64_64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The comments in _dl_dst_count is adjusted to match what the code does
which is count DSTs from the start of the string. With the removal of
DL_DST_COUNT we no longer accept an input that starts at the first $.
In _dl_dst_substitute we adjust the comment to indicate that both
conditions must be true for the SUID/SGID $ORIGIN exception.
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI. This means that
we actually now accept slightly more sequences than before. Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects. Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling. At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories. Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.
Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run). The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259. These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.
See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor
initial shared library load-up, are cancellation points, so ld.so
should exclusively use I/O primitives that are not cancellable. We
currently achieve this by having the cancellation hooks compile as
no-ops when IS_IN(rtld); this patch changes to using exclusively
_nocancel primitives in the source code instead, which makes the
intent clearer and significantly reduces the amount of code compiled
under IS_IN(rtld) as well as IS_IN(libc) -- in particular,
elf/Makefile no longer thinks we require a copy of unwind.c in
rtld-libc.a. (The older mechanism is preserved as a backstop.)
The bulk of the change is splitting up the files that define the
_nocancel I/O functions, so they don't also define the variants that
*are* cancellation points; after which, the existing logic for picking
out the bits of libc that need to be recompiled as part of ld.so Just
Works. I did this for all of the _nocancel functions, not just the
ones used by ld.so, for consistency.
fcntl was a little tricky because it's only a cancellation point for
certain opcodes (F_SETLKW(64), which can block), and the existing
__fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which
strikes me as asking for trouble, especially as the only nontrivial
definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes.
To fix this, fcntl_common moves to fcntl_nocancel.c along with
__fcntl_nocancel, and changes its name to the extern (but hidden)
symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue
calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that
both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial
definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to
.../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro
that calls an inline function.
The nptl version of libpthread also changes a little, because its
"compat-routines" formerly included files that defined all the
_nocancel functions it uses; instead of continuing to duplicate them,
I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the
Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no
longer be used from libpthread.so; instead, introduce a custom
forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as
GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork()
in libpthread, and it was handling that by manipulating
libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do
what other such ports do, and have a pt-vfork.S that defines no symbols.
Right now, it appears that Hurd does not implement _nocancel I/O, so
sysdeps/generic/not-cancel.h will forward everything back to the
regular functions. This changed the names of some of the functions
that sysdeps/mach/hurd/dl-sysdep.c needs to interpose.
* elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c
* sysdeps/unix/sysv/linux/dl-sysdep.c
Include not-cancel.h. Use __close_nocancel instead of __close,
__open64_nocancel instead of __open, __read_nocancel instead of
__libc_read, and __write_nocancel instead of __libc_write.
* csu/check_fds.c (check_one_fd)
* sysdeps/posix/fdopendir.c (__fdopendir)
* sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel
instead of __fcntl and/or __libc_fcntl.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np)
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np)
* sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system):
Use __open64_nocancel instead of __open_nocancel.
* sysdeps/unix/sysv/linux/not-cancel.h: Move all of the
hidden_proto declarations to the end and issue them if either
IS_IN(libc) or IS_IN(rtld).
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines):
Add close_nocancel, fcntl_nocancel, nanosleep_nocancel,
open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel,
read_nocancel, waitpid_nocancel, write_nocancel.
* io/Versions [GLIBC_PRIVATE]: Add __libc_fcntl,
__fcntl_nocancel, __open64_nocancel, __write_nocancel.
* posix/Versions: Add __nanosleep_nocancel, __pause_nocancel.
* nptl/pt-fcntl.c: New file.
* nptl/Makefile (pthread-compat-wrappers): Remove fcntl.
(libpthread-routines): Add pt-fcntl.
* include/fcntl.h (__fcntl_nocancel_adjusted): New function.
(__libc_fcntl): Remove attribute_hidden.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Call
__fcntl_nocancel_adjusted, not fcntl_common.
(__fcntl_nocancel): Move to new file fcntl_nocancel.c.
(fcntl_common): Rename to __fcntl_nocancel_adjusted; also move
to fcntl_nocancel.c.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h:
Define FCNTL_ADJUST_CMD here, as a self-contained macro.
* sysdeps/unix/sysv/linux/close.c: Move __close_nocancel to...
* sysdeps/unix/sysv/linux/close_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nanosleep.c: Move __nanosleep_nocancel to...
* sysdeps/unix/sysv/linux/nanosleep_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open.c: Move __open_nocancel to...
* sysdeps/unix/sysv/linux/open_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open64.c: Move __open64_nocancel to...
* sysdeps/unix/sysv/linux/open64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat.c: Move __openat_nocancel to...
* sysdeps/unix/sysv/linux/openat_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat64.c: Move __openat64_nocancel to...
* sysdeps/unix/sysv/linux/openat64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/pause.c: Move __pause_nocancel to...
* sysdeps/unix/sysv/linux/pause_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/read.c: Move __read_nocancel to...
* sysdeps/unix/sysv/linux/read_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/waitpid.c: Move __waitpid_nocancel to...
* sysdeps/unix/sysv/linux/waitpid_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/write.c: Move __write_nocancel to...
* sysdeps/unix/sysv/linux/write_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nios2/Makefile: Don't override
libpthread-routines.
* sysdeps/unix/sysv/linux/nios2/pt-vfork.S: New file which
defines nothing.
* sysdeps/mach/hurd/dl-sysdep.c: Define __read instead of
__libc_read, and __write instead of __libc_write. Define
__open64 in addition to __open.
_init and _fini are special functions provided by glibc for linker to
define DT_INIT and DT_FINI in executable and shared library. They
should never be put in dynamic symbol table. This patch marks them as
hidden to remove them from dynamic symbol table.
Tested with build-many-glibcs.py.
[BZ #23145]
* elf/Makefile (tests-special): Add $(objpfx)check-initfini.out.
($(all-built-dso:=.dynsym): New target.
(common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym).
($(objpfx)check-initfini.out): New target.
(generated): Add check-initfini.out.
* scripts/check-initfini.awk: New file.
* sysdeps/aarch64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/alpha/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/arm/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/hppa/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/i386/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/ia64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/m68k/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/microblaze/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/nios2/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sh/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sparc/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/x86_64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
This is needed to support debugging dlopened shared libraries in static
PIE.
[BZ #23206]
* elf/dl-reloc-static-pie.c (_dl_relocate_static_pie): Initialize
_r_debug and update DT_DEBUG for debugger.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
alloca for it may cause stack overflow. If the note is larger than
__MAX_ALLOCA_CUTOFF, use dynamically allocated memory to read it in.
2018-05-05 Paul Pluzhnikov <ppluzhnikov@google.com>
[BZ #20419]
* elf/dl-load.c (open_verify): Fix stack overflow.
* elf/Makefile (tst-big-note): New test.
* elf/tst-big-note-lib.S: New.
* elf/tst-big-note.c: New.
Do not relocate absolute symbols by the base address. Such symbols have
SHN_ABS as the section index and their value is not supposed to be
affected by relocation as per the ELF gABI[1]:
"SHN_ABS
The symbol has an absolute value that will not change because of
relocation."
The reason for our non-conformance here seems to be an old SysV linker
bug causing symbols like _DYNAMIC to be incorrectly emitted as absolute
symbols[2]. However in a previous discussion it was pointed that this
is seriously flawed by preventing the lone purpose of the existence of
absolute symbols from being used[3]:
"On the contrary, the only interpretation that makes sense to me is that
it will not change because of relocation at link time or at load time.
Absolute symbols, from the days of the earliest linking loaders, have
been used to represent addresses that are outside the address space of
the module (e.g., memory-mapped addresses or kernel gateway pages).
They've even been used to represent true symbolic constants (e.g.,
system entry point numbers, sizes, version numbers). There's no other
way to represent a true absolute symbol, while the meaning you seek is
easily represented by giving the symbol a non-negative st_shndx value."
and we ought to stop supporting our current broken interpretation.
Update processing for dladdr(3) and dladdr1(3) so that SHN_ABS symbols
are ignored, because under the corrected interpretation they do not
represent addresses within a mapped file and therefore are not supposed
to be considered.
References:
[1] "System V Application Binary Interface - DRAFT - 19 October 2010",
The SCO Group, Section "Symbol Table",
<http://www.sco.com/developers/gabi/2012-12-31/ch4.symtab.html>
[2] Alan Modra, "Absolute symbols"
<https://sourceware.org/ml/binutils/2012-05/msg00019.html>
[3] Cary Coutant, "Re: Absolute symbols"
<https://sourceware.org/ml/binutils/2012-05/msg00020.html>
[BZ #19818]
* sysdeps/generic/ldsodefs.h (SYMBOL_ADDRESS): Handle SHN_ABS
symbols.
* elf/dl-addr.c (determine_info): Ignore SHN_ABS symbols.
* elf/tst-absolute-sym.c: New file.
* elf/tst-absolute-sym-lib.c: New file.
* elf/tst-absolute-sym-lib.lds: New file.
* elf/Makefile (tests): Add `tst-absolute-sym'.
(modules-names): Add `tst-absolute-sym-lib'.
(LDLIBS-tst-absolute-sym-lib.so): New variable.
($(objpfx)tst-absolute-sym-lib.so): New dependency.
($(objpfx)tst-absolute-sym): New dependency.
Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When $(tests-execstack-$(have-z-execstack)) is added to tests before
it is defined, it is empty. This patch adds it to tests after it is
defined.
[BZ #22998]
* elf/Makefile (tests): Add $(tests-execstack-$(have-z-execstack))
after it is defined.
As requested in bug 20079, this patch adds SHT_X86_64_UNWIND (a
standard value from the x86_64 ABI) to elf.h.
Tested for x86_64.
[BZ #20079]
* elf/elf.h (SHT_X86_64_UNWIND): New macro.
If the system crashes before the file data has been written to disk, the
file system recovery upon the next mount may restore a partially
rewritten temporary file under the non-temporary (final) name (after the
rename operation).
This looks like a post-exploitation hardening measure: If an attacker is
able to redirect execution flow, they could use that to load a DSO which
contains additional code (or perhaps make the stack executable).
However, the checks are not in the correct place to be effective: If
they are performed before the critical operation, an attacker with
sufficient control over execution flow could simply jump directly to
the code which performs the operation, bypassing the check. The check
would have to be executed unconditionally after the operation and
terminate the process in case a caller violation was detected.
Furthermore, in _dl_check_caller, there was a fallback reading global
writable data (GL(dl_rtld_map).l_map_start and
GL(dl_rtld_map).l_text_end), which could conceivably be targeted by an
attacker to disable the check, too.
Other critical functions (such as system) remain completely
unprotected, so the value of these additional checks does not appear
that large. Therefore this commit removes this functionality.
Linux 4.15 adds NT_S390_RI_CB to linux/elf.h (and NT_ARM_SVE, which we
already have in glibc). This shows up that various other ELF note
values from linux/elf.h are missing from glibc's elf.h.
This patch adds the missing values that are relevant to glibc
architectures. As elf.h is a general description of the ELF format,
not necessarily limited to glibc configurations, there's an argument
for having the remaining NT_* values that Linux uses for non-glibc
architectures in glibc's elf.h as well, but this patch does not add
them.
Adding the NT_PRFPREG name is bug 14890. That bug also requests
making the NT_FPREGSET name obsolete. Given that elf.h is not just
for Linux but can describe ELF for other operating systems, I don't
think that a change of name in the Linux kernel is sufficient
justification for declaring the other name obsolete; there can be
multiple names for the same note value, even with incompatible
semantics, if those reflect variants of the ELF format in actual use.
For example, FreeBSD appears still to have the name NT_FPREGSET
<https://github.com/freebsd/freebsd/blob/master/sys/sys/elf_common.h>
(note: I haven't checked whether the FreeBSD kernel actually generates
such notes or whether this is actually an other-OS definition present
in FreeBSD's header).
[BZ #14890]
* elf/elf.h (NT_PRFPREG): New macro.
(NT_S390_VXRS_LOW): Likewise.
(NT_S390_VXRS_HIGH): Likewise.
(NT_S390_GS_CB): Likewise.
(NT_S390_GS_BC): Likewise.
(NT_S390_RI_CB): Likewise.
The only differences in ld.so are line numbers for asserts.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
* elf/dl-addr.c (determine_info): Use ADDRIDX with DT_GNU_HASH.
* elf/dl-lookup.c (_dl_setup_hash): Likewise.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
The RISC-V port defines ELF flags that enforce compatibility between
various objects. This adds the shared support necessary for these
flags.
2018-01-25 Palmer Dabbelt <palmer@sifive.com>
* elf/cache.c (print_entry): Add FLAG_RISCV_FLOAT_ABI_SOFT and
FLAG_RISCV_FLOAT_ABI_DOUBLE.
* elf/elf.h (EF_RISCV_RVC): New define.
(EF_RISCV_FLOAT_ABI): Likewise.
(EF_RISCV_FLOAT_ABI_SOFT): Likewise.
(EF_RISCV_FLOAT_ABI_SINGLE): Likewise.
(EF_RISCV_FLOAT_ABI_DOUBLE): Likewise.
(EF_RISCV_FLOAT_ABI_QUAD): Likewise.
* sysdeps/generic/ldconfig.h (FLAG_RISCV_FLOAT_ABI_SOFT): New
define.
(FLAG_RISCV_FLOAT_ABI_DOUBLE): Likewise.
This patch synchronizes DF_1_* flags with binutils
and ensures that all DF_1_* flags defined in binutil's
include/elf/common.h are also defined glibc's elf/elf.h.
This is a user visible change since elf/elf.h is installed
by default as /usr/include/elf.h.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This commit adds a new _dl_open_hook entry for dlvsym and implements the
function using the existing dl_lookup_symbol_x function supplied by the
dynamic loader.
A new hook variable, _dl_open_hook2, is introduced, which should make
this change suitable for backporting: For old statically linked
binaries, __libc_dlvsym will always return NULL.
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
is_path argument is no longer used and could be safely removed.
* elf/dl-dst.h (DL_DST_COUNT): Remove is_path argument, all callers
updated.
* elf/dl-load.c (is_dst, _dl_dst_count, _dl_dst_substitute,
expand_dynamic_string_token): Likewise.
* sysdeps/generic/ldsodefs.h (_dl_dst_count, _dl_dst_substitute): Remove
is_path argument.
is_dst is called either by _dl_dst_count or by _dl_dst_substitute.
_dl_dst_count is called by DL_DST_COUNT only.
DL_DST_COUNT is called either by expand_dst with is_path == 0
or by expand_dynamic_string_token.
_dl_dst_substitute is called either from expand_dst with is_path == 0
or from expand_dynamic_string_token.
The latter function is called either from _dl_map_object with is_path == 0
or from fillin_rpath with is_path == 1 and name containing no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (is_dst): Remove checks that is_path is set and name
contains ':', and all code depending on these checks.
There are just two users of _dl_dst_substitute: one is expand_dst that
sets is_path argument to 0, another one is expand_dynamic_string_token.
The latter function also has just two users: one is _dl_map_object that
sets is_path argument to 0, another one is fillin_rpath that sets
is_path argument to 1 and name argument contains no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (_dl_dst_substitute): Remove checks that is_path
is set and name contains ':', and all code depending on these checks.
There are just two users of fillin_rpath: one is decompose_rpath that
sets check_trusted argument to 0, another one is _dl_init_paths that
sets check_trusted argument to __libc_enable_secure and invokes
fillin_rpath only when LD_LIBRARY_PATH is non-empty.
Starting with commit
glibc-2.25.90-512-gf6110a8fee2ca36f8e2d2abecf3cba9fa7b8ea7d,
LD_LIBRARY_PATH is ignored for __libc_enable_secure executables,
so check_trusted argument of fillin_rpath is always zero.
* elf/dl-load.c (is_trusted_path): Remove.
(fillin_rpath): Remove check_trusted argument and its use,
all callers changed.
After
commit 9d7a3741c9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Dec 15 16:59:33 2017 -0800
Add --enable-static-pie configure option to build static PIE [BZ #19574]
and
commit 00c714df39
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Dec 18 12:24:26 2017 -0800
Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614]
$(no-pie-ldflag) is no longer effective since no-pie-ldflag is defined
to -no-pie only if GCC defaults to PIE. When --enable-static-pie is
used to configure glibc build and GCC doesn't default to PIE. no-pie-ldflag
is undefined and these tests:
elf/Makefile:LDFLAGS-tst-dlopen-aout = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-prelink = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-main1 = $(no-pie-ldflag)
gmon/Makefile:LDFLAGS-tst-gmon := $(no-pie-ldflag)
may fail to link. This patch replaces "-pie" with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie)
and repleces
LDFLAGS-* = $(no-pie-ldflag)
with
tst-*-no-pie = yes
so that tst-dlopen-aout, tst-prelink, tst-main1 and tst-gmon are always
built as non-PIE, with and without --enable-static-pie, regardless if
GCC defaults to PIE or non-PIE.
Tested with build-many-glibcs.py without --enable-static-pie as well as
with --enable-static-pie for x86_64, x32 and i686.
[BZ #22630]
* Makeconfig (link-pie-before-libc): Replace -pie with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie).
* elf/Makefile (LDFLAGS-tst-dlopen-aout): Removed.
(tst-dlopen-aout-no-pie): New.
(LDFLAGS-tst-prelink): Removed.
(tst-prelink-no-pie): New.
(LDFLAGS-tst-main1): Removed.
(tst-main1-no-pie): New.
* gmon/Makefile (LDFLAGS-tst-gmon): Removed.
(tst-gmon-no-pie): New.
GLRO (_rtld_global_ro) is read-only after initialization and can
therefore not be patched at run time, unlike the hook table addresses
and their contents, so this is a desirable hardening feature.
The hooks are only needed if ld.so has not been initialized, and this
happens only after static dlopen (dlmopen uses a single ld.so object
across all namespaces).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with commit
glibc-2.18.90-470-g2a939a7e6d81f109d49306bc2e10b4ac9ceed8f9 that
introduced substitution of dynamic string tokens in fillin_rpath,
_dl_init_paths invokes _dl_dst_substitute for $LD_LIBRARY_PATH twice:
the first time it's called directly, the second time the result
is passed on to fillin_rpath which calls expand_dynamic_string_token
which in turn calls _dl_dst_substitute, leading to the following
behaviour:
$ mkdir -p /tmp/'$ORIGIN' && cd /tmp/'$ORIGIN' &&
echo 'int main(){}' |gcc -xc - &&
strace -qq -E LD_LIBRARY_PATH='$ORIGIN' -e /open ./a.out
open("/tmp//tmp/$ORIGIN/tls/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/tls/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
Fix this by removing the direct _dl_dst_substitute invocation.
* elf/dl-load.c (_dl_init_paths): Remove _dl_dst_substitute preparatory
code and invocation.
ldconfig supports `include' directives and use the glob function to
process them. The glob function sort entries according to the LC_COLLATE
category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry
in /etc/ld.so.conf, the order therefore depends on the locale used to
run ldconfig. A few examples of locale specific order that might be
disturbing in that context compared to the C locale:
- The cs_CZ and sk_SK locales sort the digits after the letters.
- The et_EE locale sorts the 'z' between 's' and 't'.
This patch fixes that by setting LC_COLLATE to C in order to process
files in deterministic order, independently of the locale used to launch
ldconfig.
NOTE: This should NOT be backported to older release branches.
Changelog:
[BZ #22505]
* elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
The test tst-leaks1 exercises calling dlopen with a $ORIGIN DST.
This results in a theoretical leak e.g.
Memory not freed:
-----------------
Address Size Caller
0x0000000001d766c0 0x21 at 0x7fb1bd8bf4ab
Or as seen via valgrind:
==27582== 33 bytes in 1 blocks are still reachable in loss record 1 of 1
==27582== at 0x4C2CB6B: malloc (vg_replace_malloc.c:299)
==27582== by 0x40124AA: _dl_get_origin (dl-origin.c:50)
==27582== by 0x4007DB9: expand_dynamic_string_token (dl-load.c:382)
==27582== by 0x400899C: _dl_map_object (dl-load.c:2160)
==27582== by 0x4013020: dl_open_worker (dl-open.c:224)
==27582== by 0x5166F9B: _dl_catch_exception (dl-error-skeleton.c:198)
==27582== by 0x4012BD9: _dl_open (dl-open.c:594)
==27582== by 0x4E39EF5: dlopen_doit (dlopen.c:66)
==27582== by 0x5166F9B: _dl_catch_exception (dl-error-skeleton.c:198)
==27582== by 0x516700E: _dl_catch_error (dl-error-skeleton.c:217)
==27582== by 0x4E3A514: _dlerror_run (dlerror.c:162)
==27582== by 0x4E39F70: dlopen@@GLIBC_2.2.5 (dlopen.c:87)
There is no real leak.
The calling link map (the executable's link map) has it's l_origin
expanded for future use as part of _dl_get_origin, and that results
in the main executable link map having a N-byte allocation for
l->l_origin that is never freed since the executable's link map is
just a part of the process.
To take this into account we do one dlopen with $ORIGIN before
calling mtrace to force the initialization of the executable link
map.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
SXID_ERASE is implicit for all environment variables. Avoid
mentioning it in the tunables list; that way only the ones with
SXID_IGNORE remain prominent and mentioned. TODO: we need to audit
each of those cases and drop them to SXID_ERASE wherever possible.
A glibc master build with --enable-nss-crypt using the NSS
crypto libraries fails during make check with the following error:
<command-line>:0:0: error: "USE_CRYPT" redefined [-Werror]
<command-line>:0:0: note: this is the location of the previous
definition
This is caused by commit 36975e8e7e
by H.J. Lu which replaces all = with +=. The fix is to undefine
USE_CRYPT before defining it to zero.
Committed as an obvious fix. Fixes the build issue on x86_64 with
no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
A note header has 3 4-bytes fields, followed by note name and note
descriptor. According to gABI, in a note entry, the note name field,
not note name size, is padded for the note descriptor. And the note
descriptor field, not note descriptor size, is padded for the next
note entry. Notes are aligned to 4 bytes in 32-bit objects and 8 bytes
in 64-bit objects.
For all GNU notes, the name is "GNU" which is 4 bytes. They have the
same format in the first 16 bytes in both 32-bit and 64-bit objects.
They differ by note descriptor size and note type. So far, .note.ABI-tag
and .note.gnu.build-id notes are always aligned to 4 bytes. The exsting
codes compute the note size by aligning the note name size and note
descriptor size to 4 bytes. It happens to produce the same value as
the actual note size by luck since the name size is 4 and offset of the
note descriptor is 16. But it will produce the wrong size when note
alignment is 8 bytes in 64-bit objects.
This patch defines ELF_NOTE_DESC_OFFSET and ELF_NOTE_NEXT_OFFSET to
properly compute offsets of note descriptor and next note. It uses
alignment of PT_NOTE segment to support both 4-byte and 8-byte note
alignments in 64-bit objects. To handle PT_NOTE segments with
incorrect alignment, which may lead to an infinite loop, if segment
alignment is less than 4, we treate alignment as 4 bytes since some
note segments have 0 or 1 byte alignment.
[BZ #22370]
* elf/dl-hwcaps.c (ROUND): Removed.
(_dl_important_hwcaps): Replace ROUND with ELF_NOTE_DESC_OFFSET
and ELF_NOTE_NEXT_OFFSET.
* elf/dl-load.c (ROUND): Removed.
(open_verify): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* elf/readelflib.c (ROUND): Removed.
(process_elf_file): Replace ROUND with ELF_NOTE_NEXT_OFFSET.
* include/elf.h [!_ISOMAC]: Include <libc-pointer-arith.h>.
[!_ISOMAC] (ELF_NOTE_DESC_OFFSET): New.
[!_ISOMAC] (ELF_NOTE_NEXT_OFFSET): Likewise.
Combine the four places where link maps are sorted into a single function.
This also moves the logic to skip the first map (representing the main
binary) to the callers.
To support Intel Control-flow Enforcement Technology (CET) run-time
control:
1. An architecture specific field in the writable ld.so namespace is
needed to indicate if CET features are enabled at run-time.
2. An architecture specific field in struct link_map is needed if
CET features are enabled in an ELF module.
This patch adds dl-procruntime.c to the writable ld.so namespace and
link_map.h to struct link_map.
Tested with build-many-glibcs.py.
* elf/dl-support.c: Include <dl-procruntime.c>.
* include/link.h: Include <link_map.h>.
* sysdeps/generic/dl-procruntime.c: New file.
* sysdeps/generic/link_map.h: Likewise.
* sysdeps/generic/ldsodefs.h: Include <dl-procruntime.c> in
the writable ld.so namespace.
These static functions are not needed if a target does not do lazy
tlsdesc initialization.
* elf/tlsdeschtab.h (_dl_tls_resolve_early_return_p): Mark unused.
(_dl_tlsdesc_wake_up_held_fixups): Likewise.
Use $(LDFLAGS-$(@F)) with tst-tls1-static-non-pie may not be sufficient
when static PIE is built by default. Use $(DEFAULT-LDFLAGS-$(@F)) in
+link-static-before-libc to make sure that tst-tls1-static-non-pie is
always built as non-PIE static executable and make sure that crt1.o is
used with tst-tls1-static-non-pie.
* Makeconfig (+link-static-before-libc): Use
$(DEFAULT-LDFLAGS-$(@F)).
* elf/Makefile (CRT-tst-tls1-static-non-pie): New.
(LDFLAGS-tst-tls1-static-non-pie): Renamed to ...
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): This.
Verify that crt1.o can be used with main () in a shared object.
* elf/Makefile (tests): Add tst-main1.
(modules-names): Add tst-main1mod.
($(objpfx)tst-main1): New.
(CRT-tst-main1): Likewise.
(LDFLAGS-tst-main1): Likewise.
(LDLIBS-tst-main1): Likewise.
(tst-main1mod.so-no-z-defs): Likewise.
* elf/tst-main1.c: New file.
* elf/tst-main1mod.c: Likewise.
(&_dl_main_map) is used instead of (&bootstrap_map) to bootstrap static
PIE. Define BOOTSTRAP_MAP with (&_dl_main_map) to avoid hardcode to
(&bootstrap_map).
* elf/rtld.c (BOOTSTRAP_MAP): New.
(RESOLVE_MAP): Replace (&bootstrap_map) with BOOTSTRAP_MAP.
* sysdeps/hppa/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
* sysdeps/ia64/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
__dl_iterate_phdr is hidden and should be accessed directly within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* elf/dl-iteratephdr.c (hidden_proto (__dl_iterate_phdr)): Moved
to ...
* include/link.h (hidden_proto (__dl_iterate_phdr)): Here.
tst-tls1-static-non-pie is built with $(no-pie-ldflag) to make it a
non-PIE static executable, regardless if --enable-static-pie is used
to configure glibc.
* elf/Makefile (tests-static-internal): Add
tst-tls1-static-non-pie.
(LDFLAGS-tst-tls1-static-non-pie): New.
* elf/tst-tls1-static-non-pie.c: New file.
Current implementation of tunables does not set arena_max and arena_test
values. Any value provided by glibc.malloc.arena_max and
glibc.malloc.arena_test parameters is ignored.
These tunables have minval value set to 1 (see elf/dl-tunables.list file)
and undefined maxval value. In that case default value (which is 0. see
scripts/gen-tunables.awk) is being used to set maxval.
For instance, generated tunable_list[] entry for arena_max is:
(gdb) p *cur
$1 = {name = 0x7ffff7df6217 "glibc.malloc.arena_max",
type = {type_code = TUNABLE_TYPE_SIZE_T, min = 1, max = 0},
val = {numval = 0, strval = 0x0}, initialized = false,
security_level = TUNABLE_SECLEVEL_SXID_IGNORE,
env_alias = 0x7ffff7df622e "MALLOC_ARENA_MAX"}
As a result, any value of glibc.malloc.arena_max is ignored by
TUNABLE_SET_VAL_IF_VALID_RANGE macro
__type min = (__cur)->type.min; <- initialized to 1
__type max = (__cur)->type.max; <- initialized to 0!
if (min == max) <- false
{
min = __default_min;
max = __default_max;
}
if ((__type) (__val) >= min && (__type) (val) <= max) <- false
{
(__cur)->val.numval = val;
(__cur)->initialized = true;
}
Assigning correct min/max values at a build time fixes a problem.
Plus, a bit of optimization: Setting of default min/max values for the
given type at a run time might be eliminated.
* elf/dl-tunables.c (do_tunable_update_val): Range checking fix.
* scripts/gen-tunables.awk: Set unspecified minval and/or maxval
values to correct default value for given type.
ELF objects generated with "objcopy --only-keep-debug" have
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
DYNAMIC 0x0+e28 0x0+200e40 0x0+200e40 0x0+ 0x0+1a0 RW 0x8
with 0 file size. ld.so should skip such PT_DYNAMIC segments.
Without a PT_DYNAMIC segment the loading of the shared object will
fail, and therefore ldd on such objects will also fail instead of
crashing. This provides better diagnostics for tooling that is
attempting to inspect the invalid shared objects which may just
contain debug information.
[BZ #22101]
* elf/Makefile (tests): Add tst-debug1.
($(objpfx)tst-debug1): New.
($(objpfx)tst-debug1.out): Likewise.
($(objpfx)tst-debug1mod1.so): Likewise.
* elf/dl-load.c (_dl_map_object_from_fd): Skip PT_DYNAMIC segment
with p_filesz == 0.
* elf/tst-debug1.c: New file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some programs have more than one source files. These non-lib modules
should not be compiled with -DMODULE_NAME=libc. This patch puts these
non-lib modules in $(others-extras) and adds $(others-extras) to
all-nonlib.
[BZ #21864]
* Makerules (all-nonlib): Add $(others-extras).
* catgets/Makefile (others-extras): New.
* elf/Makefile (others-extras): Likewise.
* nss/Makefile (others-extras): Likewise.
Since __libc_multiple_libcs is defined as hidden symbol in init-first.c,
it should be always marked with attribute_hidden.
[BZ #18822]
* csu/libc-start.c (__libc_multiple_libcs): Removed.
* elf/dl-open.c: Include <libc-internal.h>.
(__libc_multiple_libcs): Removed.
* elf/dl-sysdep.c: Include <libc-internal.h> instead of
<hp-timing.h>.
* include/libc-internal.h (__libc_multiple_libcs): New.
* misc/sbrk.c: Include <libc-internal.h>.
(__libc_multiple_libcs): Removed.
Assembler code passes the address of _dl_fini to __libc_start_main,
whose function pointer argument lacks the attribute. This means
that calls could use the wrong ABI. Fortunately, for zero-parameter
void-returning functions, internal_function does not change ABI
on i386 (the only architecture which uses internal_function), so
this inconsistency was harmless (which is why it had not been
noticed so far).
This commit separates allocating and raising exceptions. This
simplifies catching and re-raising them because it is no longer
necessary to make a temporary, on-stack copy of the exception message.
On Linux/i386, there are 3 ways to make a system call:
1. call *%gs:SYSINFO_OFFSET. This requires TLS initialization.
2. call *_dl_sysinfo. This requires relocation of _dl_sysinfo.
3. int $0x80. This is slower than #2 and #3, but works everywhere.
When an object file is compiled with PIC, #1 is prefered since it is
faster than #3 and doesn't require relocation of _dl_sysinfo. For
dynamic executables, ld.so initializes TLS. However, for static
executables, before TLS is initialized by __libc_setup_tls, #3 should
be used for system calls.
This patch adds <startup.h> which defines _startup_fatal and defaults
it to __libc_fatal. It replaces __libc_fatal with _startup_fatal in
static executables where it is called before __libc_setup_tls is called.
This header file is included in all files containing functions which are
called before __libc_setup_tls is called. On Linux/i386, when PIE is
enabled by default, _startup_fatal is turned into ABORT_INSTRUCTION and
I386_USE_SYSENTER is defined to 0 so that "int $0x80" is used for system
calls before __libc_setup_tls is called.
Tested on i686 and x86-64. Without this patch, all statically-linked
tests will fail on i686 when the compiler defaults to -fPIE.
[BZ #21913]
* csu/libc-tls.c: Include <startup.h> first.
(__libc_setup_tls): Call _startup_fatal instead of __libc_fatal.
* elf/dl-tunables.c: Include <startup.h> first.
* include/libc-symbols.h (BUILD_PIE_DEFAULT): New.
* sysdeps/generic/startup.h: New file.
* sysdeps/unix/sysv/linux/i386/startup.h: Likewise.
* sysdeps/unix/sysv/linux/i386/brk.c [BUILD_PIE_DEFAULT != 0]
(I386_USE_SYSENTER): New. Defined to 0.
tst-prelink.c checks for conflict with GLOB_DAT relocation against stdio.
On i386, there is no GLOB_DAT relocation against stdio with PIE. We
should compile tst-prelink.c without PIE.
[BZ #21815]
* elf/Makefile (CFLAGS-tst-prelink.c): New.
(LDFLAGS-tst-prelink): Likewise.
Gold doesn't support protected data symbol:
configure:5672: checking linker support for protected data symbol
configure:5682: gcc -fuse-ld=gold -nostdlib -nostartfiles -fno-stack-protector -fPIC -shared conftest.c -o conftest.so
configure:5685: $? = 0
configure:5692: gcc -fuse-ld=gold -nostdlib -nostartfiles -fno-stack-protector conftest.c -o conftest conftest.so
/usr/local/bin/ld.gold: error: /tmp/ccXWoofs.o: cannot make copy relocation for protected symbol 'bar', defined in conftest.so
collect2: error: ld returned 1 exit status
Run vismain only if linker supports protected data symbol.
* elf/Makefile (tests): Add vismain only if
$(have-protected-data) == yes.
(tests-pie): Likewise.
The function maybe_enable_malloc_check, which is called by
__tunables_init, calls __access_noerrno. It isn't problem when
symbol is is in ld.so, which has a special version of __access_noerrno
without stack protector. But when glibc is built with stack protector,
maybe_enable_malloc_check in libc.a can't call the regular version of
__access_noerrno with stack protector.
This patch changes how Linux defines the __access_noerrno to be an
inline call instead and thus preventing defining different build
rules for ld/static and shared.
H.J. Lu <hongjiu.lu@intel.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21744]
* elf/dl-tunables.c: Include not-errno.h header.
* include/unistd.h (__access_noerrno): Remove definition.
* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
* sysdeps/generic/not-errno.h: New file.
* sysdeps/unix/sysv/linux/not-errno.h: Likewise.
The patch proposed by Peter Bergner [1] to libgcc in order to fix
[BZ #21707] adds a dependency on a symbol provided by the loader,
forcing the loader to be linked to tests after libgcc was linked.
It also requires to read the thread pointer during IRELA relocations.
Tested on powerpc, powerpc64, powerpc64le, s390x and x86_64.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg01383.html
[BZ #21707]
* csu/libc-start.c (LIBC_START_MAIN): Perform IREL{,A}
relocations before or after initializing the TCB on statically
linked executables. That's a per-architecture definition.
* elf/rtld.c (dl_main): Add a comment about thread-local
variables initialization.
* sysdeps/generic/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
* sysdeps/powerpc/Makefile:
[$(subdir) = elf && $(multi-arch) != no] (tests-static-internal): Add tst-tlsifunc-static.
[$(subdir) = elf && $(multi-arch) != no && $(build-shared) == yes]
(tests-internal): Add tst-tlsifunc.
* sysdeps/powerpc/tst-tlsifunc.c: New file.
* sysdeps/powerpc/tst-tlsifunc-static.c: Likewise.
* sysdeps/powerpc/powerpc64le/Makefile (f128-loader-link): New
variable.
[$(subdir) = math] (test-float128% test-ifloat128%): Force
linking to the loader after linking to libgcc.
[$(subdir) = wcsmbs || $(subdir) = stdlib] (bug-strtod bug-strtod2)
(bug-strtod2 tst-strtod-round tst-wcstod-round tst-strtod6 tst-strrom)
(tst-strfrom-locale strfrom-skeleton): Likewise.
* sysdeps/unix/sysv/linux/powerpc/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
Since _dl_resolve_conflicts is only used in elf/rtld.c, don't include
it in libc.a.
[BZ #21742]
* elf/Makefile (dl-routines): Move dl-conflict to ...
(rtld-routines): Here.
Add a new tunable (glibc.tune.cpu) to override CPU identification on
aarch64. This is useful in two cases: one where it is desirable to
pretend to be another CPU for purposes of testing or because routines
written for that CPU are beneficial for specific workloads and second
where the underlying kernel does not support emulation of MRS to get
the MIDR of the CPU.
* elf/dl-tunables.h (tunable_is_name): Move from...
* elf/dl-tunables.c (is_name): ... here.
(parse_tunables, __tunables_init): Adjust.
* manual/tunables.texi: Document glibc.tune.cpu.
* sysdeps/aarch64/dl-tunables.list: New file.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (struct
cpu_list): New type.
(cpu_list): New list of CPU names and their MIDR.
(get_midr_from_mcpu): New function.
(init_cpu_features): Override MIDR if necessary.
Building the testsuite with current GCC mainline fails with:
loadtest.c: In function 'main':
loadtest.c:76:3: error: macro expands to multiple statements [-Werror=multistatement-macros]
for (map = MAPS; map != NULL; map = map->l_next) \
^
loadtest.c:165:2: note: in expansion of macro 'OUT'
OUT;
^~~
loadtest.c:164:7: note: some parts of macro expansion are not guarded by this 'if' clause
if (debug)
^~
This seems like a genuine bug, although fairly harmless; it means the
fflush call in the OUT macro is unconditional instead of being inside
the conditional as presumably intended. This patch makes this macro
use do { } while (0) to avoid the problem.
Tested for x86_64 (testsuite), and with build-many-glibcs.py for
aarch64-linux-gnu with GCC mainline.
* elf/loadtest.c (OUT): Define using do { } while (0).
Rename glibc.tune.ifunc to glibc.tune.hwcaps and move it to
sysdeps/x86/dl-tunables.list since it is x86 specicifc. Also
change type of data_cache_size, data_cache_size and
non_temporal_threshold to unsigned long int to match size_t.
Remove usage DEFAULT_STRLEN from cpu-tunables.c.
* elf/dl-tunables.list (glibc.tune.ifunc): Removed.
* sysdeps/x86/dl-tunables.list (glibc.tune.hwcaps): New.
Remove security_level on all fields.
* manual/tunables.texi: Replace ifunc with hwcaps.
* sysdeps/x86/cpu-features.c (TUNABLE_CALLBACK (set_ifunc)):
Renamed to ..
(TUNABLE_CALLBACK (set_hwcaps)): This.
(init_cpu_features): Updated.
* sysdeps/x86/cpu-features.h (cpu_features): Change type of
data_cache_size, data_cache_size and non_temporal_threshold to
unsigned long int.
* sysdeps/x86/cpu-tunables.c (DEFAULT_STRLEN): Removed.
(TUNABLE_CALLBACK (set_ifunc)): Renamed to ...
(TUNABLE_CALLBACK (set_hwcaps)): This. Update comments. Don't
use DEFAULT_STRLEN.
The current IFUNC selection is based on microbenchmarks in glibc. It
should give the best performance for most workloads. But other choices
may have better performance for a particular workload or on the hardware
which wasn't available at the selection was made. The environment
variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used
to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz,
where the feature name is case-sensitive and has to match the ones in
cpu-features.h. It can be used by glibc developers to override the
IFUNC selection to tune for a new processor or improve performance for
a particular workload. It isn't intended for normal end users.
NOTE: the IFUNC selection may change over time. Please check all
multiarch implementations when experimenting.
Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is
provided to set threshold to use non temporal store to NUMBER,
GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache
size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set
shared cache size.
* elf/dl-tunables.list (tune): Add ifunc,
x86_non_temporal_threshold,
x86_data_cache_size and x86_shared_cache_size.
* manual/tunables.texi: Document glibc.tune.ifunc,
glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size
and glibc.tune.x86_non_temporal_threshold.
* sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86/cacheinfo.c
(init_cacheinfo): Check and get data cache size, shared cache
size and non temporal threshold from cpu_features.
* sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE):
New.
[HAVE_TUNABLES] Include <unistd.h>.
[HAVE_TUNABLES] Include <elf/dl-tunables.h>.
[HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise.
[HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set
IFUNC selection, data cache size, shared cache size and non
temporal threshold.
* sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size,
shared_cache_size and non_temporal_threshold.
LD_LIBRARY_PATH can only be used to reorder system search paths, which
is not useful functionality.
This makes an exploitable unbounded alloca in _dl_init_paths unreachable
for AT_SECURE=1 programs.
Since _dl_out_of_memory is static in elf/dl-error-skeleton.c:
static const char _dl_out_of_memory[] = "out of memory";
remove _dl_out_of_memory from elf/Versions.
* elf/Versions (ld): Remove _dl_out_of_memory.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
There are 2 minimal strtoul implementations in ld.so:
1. __strtoul_internal in elf/dl-minimal.c.
2. tunables_strtoul in elf/dl-tunables.c.
This patch adds _dl_strtoul to replace them. Tested builds with and
without --enable-tunables.
[BZ #21528]
* elf/dl-minimal.c (__strtoul_internal): Removed.
(strtoul): Likewise.
* elf/dl-misc.c (_dl_strtoul): New function.
* elf/dl-tunables.c (tunables_strtoul): Removed.
(tunable_initialize): Replace tunables_strtoul with _dl_strtoul.
* elf/rtld.c (process_envvars): Likewise.
* sysdeps/unix/sysv/linux/dl-librecon.h (_dl_osversion_init):
Likewise.
* sysdeps/generic/ldsodefs.h (_dl_strtoul): New prototype.
The LD_HWCAP_MASK environment variable was ignored in static binaries,
which is inconsistent with the behaviour of dynamically linked
binaries. This seems to have been because of the inability of
ld_hwcap_mask being read early enough to influence anything but now
that it is in tunables, the mask is usable in static binaries as well.
This feature is important for aarch64, which relies on HWCAP_CPUID
being masked out to disable multiarch. A sanity test on x86_64 shows
that there are no failures. Likewise for aarch64.
* elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Always set
up hwcap and hwcap_mask.
Drop _dl_hwcap_mask when building with tunables. This completes the
transition of hwcap_mask reading from _dl_hwcap_mask to tunables.
* elf/dl-hwcaps.h: New file.
* elf/dl-hwcaps.c: Include it.
(_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update
glibc.tune.hwcap_mask.
* elf/dl-cache.c: Include dl-hwcaps.h.
(_dl_load_cache_lookup)[HAVE_TUNABLES]: Read
glibc.tune.hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
* elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
(process_envvars)[HAVE_TUNABLES]: Likewise.
* sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Don't
initialize dl_hwcap_mask when tunables are enabled.
Add LD_HWCAP_MASK to tunables in preparation of it being removed from
rtld.c. This allows us to read LD_HWCAP_MASK much earlier so that it
can influence IFUNC resolution in aarch64.
This patch does not actually do anything other than read the
LD_HWCAP_MASK variable and add the tunables way to set the
LD_HWCAP_MASK, i.e. via the glibc.tune.hwcap_mask tunable. In a
follow-up patch, the _dl_hwcap_mask will be replaced with
glibc.tune.hwcap_mask to complete the transition.
* elf/dl-tunables.list: Add glibc.tune.hwcap_mask.
* scripts/gen-tunables.awk: Include dl-procinfo.h.
* manual/tunables.texi: Document glibc.tune.hwcap_mask.
The TUNABLE_SET_VALUE and family of macros (and my later attempt to
add a TUNABLE_GET) never quite went together very well because the
overall interface was not clearly defined. This patch is an attempt
to do just that.
This patch consolidates the API to two simple sets of macros,
TUNABLE_GET* and TUNABLE_SET*. If TUNABLE_NAMESPACE is defined,
TUNABLE_GET takes just the tunable name, type and a (optionally NULL)
callback function to get the value of the tunable. The callback
function, if non-NULL, is called if the tunable was externally set
(i.e. via GLIBC_TUNABLES or any future mechanism). For example:
val = TUNABLE_GET (check, int32_t, check_callback)
returns the value of the glibc.malloc.check tunable (assuming
TUNABLE_NAMESPACE is set to malloc) as an int32_t into VAL after
calling check_callback.
Likewise, TUNABLE_SET can be used to set the value of the tunable,
although this is currently possible only in the dynamic linker before
it relocates itself. For example:
TUNABLE_SET (check, int32_t, 2)
will set glibc.malloc.check to 2. Of course, this is not possible
since we set (or read) glibc.malloc.check long after it is relocated.
To access or set a tunable outside of TUNABLE_NAMESPACE, use the
TUNABLE_GET_FULL and TUNABLE_SET_FULL macros, which have the following
prototype:
TUNABLE_GET_FULL (glibc, tune, hwcap_mask, uint64_t, NULL)
TUNABLE_SET_FULL (glibc, tune, hwcap_mask, uint64_t, 0xffff)
In future the tunable list may get split into mutable and immutable
tunables where mutable tunables can be modified by the library and
userspace after relocation as well and TUNABLE_SET will be more useful
than it currently is. However whenever we actually do that split, we
will have to ensure that the mutable tunables are protected with
locks.
* elf/Versions (__tunable_set_val): Rename to __tunable_get_val.
* elf/dl-tunables.c: Likewise.
(do_tunable_update_val): New function.
(__tunable_set_val): New function.
(__tunable_get_val): Call CB only if the tunable was externally
initialized.
(tunables_strtoul): Replace strval with initialized.
* elf/dl-tunables.h (strval): Replace with a bool initialized.
(TUNABLE_ENUM_NAME, TUNABLE_ENUM_NAME1): Adjust names to
prevent collision.
(__tunable_set_val): New function.
(TUNABLE_GET, TUNABLE_GET_FULL): New macros.
(TUNABLE_SET, TUNABLE_SET_FULL): Likewise.
(TUNABLE_SET_VAL): Remove.
(TUNABLE_SET_VAL_WITH_CALLBACK): Likewise.
* README.tunables: Document the new macros.
* malloc/arena.c (ptmalloc_init): Adjust.
Since __tunables_init is internal to ld.so, we should mark it hidden
to avoid PLT. We should also avoid PLT when calling __tunable_set_val
within ld.so.
2017-05-25 Siddhesh Poyarekar <siddhesh@sourceware.org>
H.J. Lu <hongjiu.lu@intel.com>
* elf/dl-tunables.c (__tunable_set_val): Make a hidden alias.
* elf/dl-tunables.h (__tunables_init): Mark it hidden in rtld.
(__tunable_set_val): Likewise.
It was discovered that the dynamic linker allocates a massive amount
of memory that increases with the value of LD_HWCAP_MASK. Due to
this, setting its value to 0xffffffff in the environment of
tst-env-setuid would cause it to fail in some environments where
overcommit was disabled or severely constrained because malloc would
fail.
Since this test is only concerned with the value of LD_HWCAP_MASK
envvar being conserved (or not, for setxid binaries), lower its value
to avoid spurious failures.
The allocation bug is reported as #21502.
Recognize the uint64_t type in addition to the current int32_t and
size_t. This allows addition of tunables of uint64_t types. In
addition to adding the uint64_t type, this patch also consolidates
validation and reading of integer types in tunables.
One notable change is that of overflow computation in
tunables_strtoul. The function was lifted from __internal_strtoul,
but it does not need the boundary condition check (i.e. result ==
ULONG_MAX) since it does not need to set errno. As a result the check
can be simplified, which I have now done.
* elf/dl-tunable-types.h (tunable_type_code_t): New type
TUNABLE_TYPE_UINT_64.
* elf/dl-tunables.c (tunables_strtoul): Return uint64_t.
Simplify computation of overflow.
(tunable_set_val_if_valid_range_signed,
tunable_set_val_if_valid_range_unsigned): Remove and replace
with this...
(TUNABLE_SET_VAL_IF_VALID_RANGE): ... New macro.
(tunable_initialize): Adjust. Add uint64_t support.
(__tunable_set_val): Add uint64_t support.
* README.tunables: Document it.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files. extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module. Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.
* extra-modules.mk: Delete file.
* cppflags-iterator.mk: Rename to ...
* libof-iterator.mk: ...this. Adjust comments.
* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
Use libof-iterator.mk instead of cppflags-iterator.mk or
extra-modules.mk.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
Add support to getauxval() for new types to get L1, L2, L3 cache sizes,
cache line sizes, and cache associativities. The new types for
getauxval() were added in the stream for Linux kernel v4.11 in commit
98a5f361b8625c6f4841d6ba013bbf0e80d08147.
* elf/elf.h (AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE,
AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY,
AT_L3_CACHESIZE, AT_L3_CACHEGEOMETRY): New. Add auxvec
identifiers from kernel arch/powerpc/include/uapi/asm/auxvec.h.
Since commit 8b9e9c3c0b, security_level replaces
is_secure. There were some old files need to be updated.
2017-03-23 Sunyeop Lee <sunyeop97@gmail.com>
* README.tunables: Updated descriptions.
* elf/dl-tunables.list: Fixed typo: SXID_NONE -> NONE.
* scripts/gen-tunables.awk: Updated the code related to the commit.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
The LD_HWCAP_MASK environment variable may alter the selection of
function variants for some architectures. For AT_SECURE process it
means that if an outdated routine has a bug that would otherwise not
affect newer platforms by default, LD_HWCAP_MASK will allow that bug
to be exploited.
To be on the safe side, ignore and disable LD_HWCAP_MASK for setuid
binaries.
[BZ #21209]
* elf/rtld.c (process_envvars): Ignore LD_HWCAP_MASK for
AT_SECURE processes.
* sysdeps/generic/unsecvars.h: Add LD_HWCAP_MASK.
* elf/tst-env-setuid.c (test_parent): Test LD_HWCAP_MASK.
(test_child): Likewise.
* elf/Makefile (tst-env-setuid-ENV): Add LD_HWCAP_MASK.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
The code to set value passed a tunable_val_t, which when cast to
int32_t on big-endian gives the wrong value. Instead, use
tunable_val_t.numval instead, which can then be safely cast into
int32_t.
The child process of the tst-env-setuid process was failing correctly
with EXIT_UNSUPPORTED but the parent did not carry that status forward
and failed instead. This patch fixes this so that tests on nosuid
/tmp fails gracefully with UNSUPPORTED. Tested by making my tmpfs
nosuid.
* elf/tst-env-setuid.c (do_execve): Return EXIT_UNSUPPORTED in
parent if child exited in that manner. Print WEXITSTATUS
instead of the raw status.
(do_test_prep): Rename to do_test.
(do_test): Return the result of run_executable_sgid.
(TEST_FUNCTION_ARGV): Adjust.
In _dl_nothread_init_static_tls() and init_one_static_tls() we must not
touch the DTV of other threads since we do not have ownership of them.
The DTV need not be initialized at this point anyway since only LD/GD
accesses will use them. If LD/GD accesses occur they will take care to
initialize their own thread's DTV.
Concurrency comments were removed from the patch since they need to be
reworked along with a full description of DTV ownership and when it is
or is not safe to modify these structures.
Alexandre Oliva's original patch and discussion:
https://sourceware.org/ml/libc-alpha/2016-09/msg00512.html
A setxid program that uses a glibc with tunables disabled may pass on
GLIBC_TUNABLES as is to its child processes. If the child process
ends up using a different glibc that has tunables enabled, it will end
up getting access to unsafe tunables. To fix this, remove
GLIBC_TUNABLES from the environment for setxid process.
* sysdeps/generic/unsecvars.h: Add GLIBC_TUNABLES.
* elf/tst-env-setuid-tunables.c
(test_child_tunables)[!HAVE_TUNABLES]: Verify that
GLIBC_TUNABLES is removed in a setgid process.
Florian Weimer pointed out that we have three different kinds of
environment variables (and hence tunables):
1. Variables that are removed for setxid processes
2. Variables that are ignored in setxid processes but is passed on to
child processes
3. Variables that are passed on to child processes all the time
Tunables currently only does (2) and (3) when it should be doing (1)
for MALLOC_CHECK_. This patch enhances the is_secure flag in tunables
to an enum value that can specify which of the above three categories
the tunable (and its envvar alias) belongs to.
The default is for tunables to be in (1). Hence, all of the malloc
tunables barring MALLOC_CHECK_ are explicitly specified to belong to
category (2). There were discussions around abolishing category (2)
completely but we can do that as a separate exercise in 2.26.
Tested on x86_64 to verify that there are no regressions.
[BZ #21073]
* elf/dl-tunable-types.h (tunable_seclevel_t): New enum.
* elf/dl-tunables.c (tunables_strdup): Remove.
(get_next_env): Also return the previous envp.
(parse_tunables): Erase tunables of category
TUNABLES_SECLEVEL_SXID_ERASE.
(maybe_enable_malloc_check): Make MALLOC_CHECK_
TUNABLE_SECLEVEL_NONE if /etc/setuid-debug is accessible.
(__tunables_init)[TUNABLES_FRONTEND ==
TUNABLES_FRONTEND_valstring]: Update GLIBC_TUNABLES envvar
after parsing.
[TUNABLES_FRONTEND != TUNABLES_FRONTEND_valstring]: Erase
tunable envvars of category TUNABLES_SECLEVEL_SXID_ERASE.
* elf/dl-tunables.h (struct _tunable): Change member is_secure
to security_level.
* elf/dl-tunables.list: Add security_level annotations for all
tunables.
* scripts/gen-tunables.awk: Recognize and generate enum values
for security_level.
* elf/tst-env-setuid.c: New test case.
* elf/tst-env-setuid-tunables: new test case.
* elf/Makefile (tests-static): Add them.
(tunable_set_val_if_valid_range_signed) ... this, and ...
(tunable_set_val_if_valid_range_unsigned) ... this.
(tunable_initialize): Call the correct one of the above based on type.
The condition when the value of an envvar is empty (not just '\0'),
the loop in tunables_init gets stuck infinitely because envp is not
incremented. Fix that by always incrementing envp in the loop.
Added test case (tst-empty-env.c) verifies the fix when the source is
configured with --enable-hardcoded-path-in-tests, thanks Josh Stone for
providing the test case. Verified on x86_64.
* elf/dl-tunables (get_next_env): Always advance envp.
* stdlib/tst-empty-env.c: New test case.
* stdlib/Makefile (tests): Use it.
Building 64-bit glibc with GCC mainline fails with:
../elf/sotruss-lib.c: In function 'la_version':
../elf/sotruss-lib.c:91:28: error: '%lu' directive output may be truncated writing between 1 and 20 bytes into a region of size 11 [-Werror=format-truncation=]
snprintf (endp, 12, ".%lu", (unsigned long int) pid);
^~~
../elf/sotruss-lib.c:91:26: note: using the range [1, 18446744073709551615] for directive argument
snprintf (endp, 12, ".%lu", (unsigned long int) pid);
^~~~~~
../elf/sotruss-lib.c:91:6: note: format output between 3 and 22 bytes into a destination of size 12
snprintf (endp, 12, ".%lu", (unsigned long int) pid);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Pids from getpid cannot actually be negative, but the compiler doesn't
know this. Other places in this file use (signed) long int for
printing, so this patch makes this place do so as well. Then it
increases the buffer size by one byte to allow for the minus sign that
can't actually occur. It doesn't seem worth using diagnostic pragmas
to save one byte; other place in this file just use a cruder 3 *
sizeof (pid_t) calculation for number of digits.
Tested with GCC mainline with compilation for aarch64 with
build-many-glibcs.py, and with glibc testsuite for x86_64 (built with
GCC 6).
* elf/sotruss-lib.c (init): Increase space allocated for pid by
one byte. Print it with %ld, cast to long int.
Builds with --enable-tunables failed on i686 because a call to getenv
got snuck into tunables, which pulled in strncmp. This patch fixes
this build failure by making the glibc.malloc.check check even
simpler. The previous approach was convoluted where the tunable was
disabled using an unsetenv and overwriting the tunable value with
colons. The easier way is to simply mark the tunable as insecure by
default (i.e. won't be read for AT_SECURE programs) and then enabled
only when the /etc/suid-debug file is found.
This also ends up removing a bunch of functions that were specially
reimplemented (strlen, unsetenv) to avoid calling into string
routines.
Tested on x86_64 and i686.
* elf/dl-tunables.c (tunables_unsetenv): Remove function.
(min_strlen): Likewise.
(disable_tunable): Likewise.
(maybe_disable_malloc_check): Rename to
maybe_enable_malloc_check.
(maybe_enable_malloc_check): Enable glibc.malloc.check tunable
if /etc/suid-debug file exists.
(__tunables_init): Update caller.
* elf/dl-tunables.list (glibc.malloc.check): Don't mark as
secure.
This patch increases timeouts on some tests I've observed timing out.
elf/tst-tls13 and iconvdata/tst-loading both dynamically load many
objects and so are slow when testing over NFS. They had timeouts set
from before the default changed from 2 to 20 seconds; this patch
removes those old settings, so effectively increasing the timeout to
20 seconds (from 3 and 10 seconds respectively).
malloc/tst-malloc-thread-fail.c and malloc/tst-mallocfork2.c are slow
on slow systems and so I set a fairly arbitrary 100 second timeout,
which seems to suffice on the system where I saw them timing out.
nss/tst-cancel-getpwuid_r.c and nss/tst-nss-getpwent.c are slow on
systems with a large passwd file; I set timeouts that empirically
worked for me. (It seems tst-cancel-getpwuid_r.c is hitting the
100000 getpwuid_r call limit in my testing, with each call taking a
bit over 0.007 seconds, so 700 seconds for the test.)
* elf/tst-tls13.c (TIMEOUT): Remove.
* iconvdata/tst-loading.c (TIMEOUT): Likewise.
* malloc/tst-malloc-thread-fail.c (TIMEOUT): Increase to 100.
* malloc/tst-mallocfork2.c (TIMEOUT): Define to 100.
* nss/tst-cancel-getpwuid_r.c (TIMEOUT): Define to 900.
* nss/tst-nss-getpwent.c (TIMEOUT): Define to 300.
elf/Makefile passes arguments to tst-ldconfig-X.sh that are different
from what it expects, so resulting in the test failing in cross
testing. This patch corrects the arguments passed (the script itself
has correct logic for cross testing, it's just the Makefile that's
wrong).
Tested for powerpc (cross testing) and for x86_64 (native testing).
* elf/Makefile ($(objpfx)tst-ldconfig-X.out): Correct arguments
passed to tst-ldconfig-X.sh.
At the GNU Tools Cauldron 2016, the state of the current tunables
patchset was considered OK with the addition of a way to select the
frontend to be used for the tunables. That is, to avoid being locked
in to one type of frontend initially, it should be possible to build
tunables with a different frontend with something as simple as a
configure switch.
To that effect, this patch enhances the --enable-tunables option to
accept more values than just 'yes' or 'no'. The current frontend (and
default when enable-tunables is 'yes') is called 'valstring', to
select the frontend where a single environment variable is set to a
colon-separated value string. More such frontends can be added in
future.
* Makeconfig (have-tunables): Check for non-negative instead
of positive.
* configure.ac: Add 'valstring' as a valid value for
--enable-tunables.
* configure: Regenerate.
* elf/Makefile (have-tunables): Check for non-negative instead
of positive.
(CPPFLAGS-dl-tunables.c): Define TUNABLES_FRONTEND for
dl-tunables.c.
* elf/dl-tunables.c (GLIBC_TUNABLES): Define only when
TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring.
(tunables_strdup): Likewise.
(disable_tunables): Likewise.
(parse_tunables): Likewise.
(__tunables_init): Process GLIBC_TUNABLES envvar only when.
TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring.
* elf/dl-tunables.h (TUNABLES_FRONTEND_valstring): New macro.
(TUNABLES_FRONTEND_yes): New macro, define as
TUNABLES_FRONTEND_valstring by default.
* manual/install.texi: Document new acceptable values for
--enable-tunables.
* INSTALL: Regenerate.
Read tunables values from the users using the GLIBC_TUNABLES
environment variable. The value of this variable is a colon-separated
list of name=value pairs. So a typical string would look like this:
GLIBC_TUNABLES=glibc.malloc.mmap_threshold=2048:glibc.malloc.trim_threshold=1024
* config.make.in (have-loop-to-function): Define.
* elf/Makefile (CFLAGS-dl-tunables.c): Add
-fno-tree-loop-distribute-patterns.
* elf/dl-tunables.c: Include libc-internals.h.
(GLIBC_TUNABLES): New macro.
(tunables_strdup): New function.
(parse_tunables): New function.
(min_strlen): New function.
(__tunables_init): Use the new functions and macro.
(disable_tunable): Disable tunable from GLIBC_TUNABLES.
* malloc/tst-malloc-usable-tunables.c: New test case.
* malloc/tst-malloc-usable-static-tunables.c: New test case.
* malloc/Makefile (tests, tests-static): Add tests.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
The previous commit prevented rtld itself from being built with
-fstack-protector, but this is not quite enough. We identify which
objects belong in rtld via a test link and analysis of the resulting
mapfile. That link is necessarily done against objects that are
stack-protected, so drags in __stack_chk_fail_local, __stack_chk_fail,
and all the libc and libio code they use.
To stop this happening, use --defsym in the test librtld.map-production
link to force the linker to predefine these two symbols (to 0, but it
could be to anything). (In a real link, this would of course be
catastrophic, but these object files are never used for anything else.)
When dynamically linking, ifunc resolvers are called before TLS is
initialized, so they cannot be safely stack-protected.
We avoid disabling stack-protection on large numbers of files by
using __attribute__ ((__optimize__ ("-fno-stack-protector")))
to turn it off just for the resolvers themselves. (We provide
the attribute even when statically linking, because we will later
use it elsewhere too.)
There is at least one use case where during exit a library destructor
might call dlclose() on a valid handle and have it fail with an
assertion. We must allow this case, it is a valid handle, and dlclose()
should not fail with an assert. In the future we might be able to return
an error that the dlclose() could not be completed because the opened
library has already been unloaded and destructors have run as part of
exit processing.
For more details see:
https://www.sourceware.org/ml/libc-alpha/2016-12/msg00859.html
Commit 7a5e3d9d63 (elf: Assume TLS is
initialized in _dl_map_object_from_fd) removed the last call of
_dl_tls_setup, but did not remove the function itself.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
Some configurations may use NSS cryptographic routines but have no
static library for those routines. The following changes allow glibc to
be built and tested with --enable-nss-crypt, but without having a static
NSS library. At a high level the change does two things:
(1) Detect at configure time if static NSS crypto libraries are
available. Assumes libfreebl3.a (instead of the existing Fedora
libfreebl.a which is incomplete) which matches libfreebl3.so.
(2) If static NSS crypto libraries are _not_ available then adjust the
way in which we build tst-linkall-static. This includes excluding a
reference to crypt and not linking against libcrypt.a, all of which
will fail otherwise.
Testing assumptions:
* Static library is named libfreebl3.a (not libfreebl.a as is currently
provided in Fedora), matching libfreebl3.so shared link name.
Tested on x86_64 on Fedora with:
(a) --enable-nss-crypt, with no static NSS library support: PASS
(previous FAIL)
(b) --enable-nss-crypt, with faked static NSS library support: PASS
(unsupported)
* Requires changing elf/Makefile to include a stub
/lib64/libfreebl3.a for testing purposes.
(c) --disable-nss-crypt: PASS
(default)
No regressions on x86_64.
For details see:
https://www.sourceware.org/ml/libc-alpha/2016-11/msg00647.html
