This patch checks _dl_debug_vdprintf, by passing various inputs to
_dl_dprintf and comparing the output with invocations of snprintf.
Signed-off-by: Roy Eldar <royeldar0@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
_dl_debug_vdprintf is a bare-bones printf implementation; currently
printing a signed integer (using "%d" format specifier) behaves
incorrectly when the number is negative, as it just prints the
corresponding unsigned integer, preceeded by a minus sign.
For example, _dl_printf("%d", -1) would print '-4294967295'.
Signed-off-by: Roy Eldar <royeldar0@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
f55727ca53 updated open_path to use the
r_search_path_struct struct but failed to update the comment.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When dlopen is being called, efforts have been made to improve
future lookup performance. This includes marking a search path
as non-existent using `stat`. However, if the root directory
is given as a search path, there exists a bug which erroneously
marks it as non-existing.
The bug is reproduced under the following sequence:
1. dlopen is called to open a shared library, with at least:
1) a dependency 'A.so' not directly under the '/' directory
(e.g. /lib/A.so), and
2) another dependency 'B.so' resides in '/'.
2. for this bug to reproduce, 'A.so' should be searched *before* 'B.so'.
3. it first tries to find 'A.so' in /, (e.g. /A.so):
- this will (obviously) fail,
- since it's the first time we have seen the '/' directory,
its 'status' is 'unknown'.
4. `buf[buflen - namelen - 1] = '\0'` is executed:
- it intends to remove the leaf and its final slash,
- because of the speciality of '/', its buflen == namelen + 1,
- it erroneously clears the entire buffer.
6. it then calls 'stat' with the empty buffer:
- which will result in an error.
7. so it marks '/' as 'nonexisting', future lookups will not consider
this path.
8. while /B.so *does* exist, failure to look it up in the '/'
directory leads to a 'cannot open shared object file' error.
This patch fixes the bug by preventing 'buflen', an index to put '\0',
from being set to 0, so that the root '/' is always kept.
Relative search paths are always considered as 'existing' so this
wont be affected.
Writeup by Moody Liu <mooodyhunter@outlook.com>
Suggested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Qixing ksyx Xue <qixingxue@outlook.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When the base is 0 or 2 and the first two characters are '0' and 'b',
but the rest are no binary digits. In this case this is no error,
and strtol must return 0 and ENDPTR points to the 'x' or 'b'.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add list end markers.
Sort text using scripts/sort-makefile-lines.py.
No code generation changes observed in non-test binary artifacts.
No regressions on x86_64 and i686.
All fixes are in comments, so the binaries should be identical
before/after this commit, but I can't verify this.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
Applying this commit results in a bit-identical rebuild of
mathvec/libmvec.so.1 (which is the only binary that gets rebuilt).
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
We do not want mach_i386.h to get installed into machine/, but into
i386/ or x86_64/ depending where mach_i386.defs was found, i.e.
according to 32/64 bitness.
Some of the s390-specific configure checks are using compile and
link configure tests. Now use only compile tests as the link
tests fails when e.g. bootstrapping a cross-toolchain due to
missing crt-files/libc.so. This is achieved by using
AC_COMPILE_IFELSE in configure.ac file.
This is observable e.g. when using buildroot which builds glibc
only once or the build-many-glibcs.py script. Note that the latter
one is building glibc twice in the compilers-step (configure-checks
fails) and in the glibcs-step (configure-checks succeed).
Note, that the s390 specific configure tests for static PIE have to
link an executable to test binutils support. Thus we can't fix
those tests.
We need to include hurd.h for libc_hidden_proto (__hurd_thread_self),
introduced in b44c1e1252 ("hurd: Fix using interposable
hurd_thread_self")
This the error log:
In file included from <command-line>:
./../include/libc-symbols.h:472:33: error: '__EI___hurd_thread_self' aliased to undefined symbol '__GI___hurd_thread_self'
472 | extern thread __typeof (name) __EI_##name \
| ^~~~~
./../include/libc-symbols.h:468:3: note: in expansion of macro '__hidden_ver2'
468 | __hidden_ver2 (, local, internal, name)
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:476:41: note: in expansion of macro '__hidden_ver1'
476 | # define hidden_def(name) __hidden_ver1(__GI_##name, name, name);
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:557:32: note: in expansion of macro 'hidden_def'
557 | # define libc_hidden_def(name) hidden_def (name)
| ^~~~~~~~~~
thread-self.c:27:1: note: in expansion of macro 'libc_hidden_def'
27 | libc_hidden_def (__hurd_thread_self)
| ^~~~~~~~~~~~~~~
Message-Id: <ZGr6wj2UOxg3F0qH@jupiter.tail36e24.ts.net>
Fixes 85f7554cd9
"Add test case for O_TMPFILE handling in open, openat"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-3-bugaevc@gmail.com>
The __hurd_fail () inline function is the dedicated, idiomatic way of
reporting errors in the Hurd part of glibc. Not only is it more concise
than '{ errno = err; return -1; }', it is since commit
6639cc1002
"hurd: Mark error functions as __COLD" marked with the cold attribute,
telling the compiler that this codepath is unlikely to be executed.
In one case, use __hurd_dfail () over the plain __hurd_fail ().
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-1-bugaevc@gmail.com>
Create a private hidden __hurd_thread_self alias, and use that one.
Fixes 2f8ecb58a5
"hurd: Fix x86_64 _hurd_tls_fork" and
c7fcce38c8
"hurd: Make sure to not use tcb->self"
Reported-by: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
4d3f846b88 ("hurd: Fix __TIMESIZE on x86_64") incidentaly dropped it
because it fixed hurd 64bit into setting __TIMESIZE to 64, and that case
was not having gai_suspend defined yet.
Fix LOCALE list formatting.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No regressions running microbenchmarks.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Rename files that cause inconsistent ordering.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using updated scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reflow Makefile.
Sort using updated scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sort tests against updated scripts/sort-makefile-lines.py.
No changes in generated code.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sort tests against updated scripts/sort-makefile-lines.py.
No changes in generated code.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We must return < 0, 0, or > 0 as the result of the comparison function
for cmp_to_key() to work correctly across all comparisons.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Move content from the Security Process[1] and Security Exceptions[2]
wiki documents into the repository so that it is in a standard place for
analysis tools to look for the glibc security policy.
This is a more or less verbatim port of the wiki document with some
restructuring for a more coherent layout since the two pages are now
merged. There should be no change in messaging in this commit.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 6.3 adds six HWCAP2_SME* constants for AArch64; add them to the
corresponding bits/hwcap.h in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
strlen, which is another ifunc-selected function, is invoked during
early static executable startup if the argv arrives from the exec
server. Make it not crash.
Checked on x86_64-gnu: statically linked executables launched after the
exec server is up now start up successfully.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-10-bugaevc@gmail.com>
On x86_64, we have to pass function arguments in registers, not on the
stack. We also have to align the stack pointer in a specific way. Since
sharing the logic with i386 does not bring much benefit, split the file
back into i386- and x86_64-specific versions, and fix the x86_64 version
to set up the thread properly.
Bonus: i386 keeps doing the extra RPC inside __thread_set_pcsptp to
fetch the state of the thread before setting it; but x86_64 no lnoger
does that.
Checked on x86_64-gnu and i686-gnu.
Fixes be6d002ca2
"hurd: Set up the basic tree for x86_64-gnu"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-9-bugaevc@gmail.com>
It is illegal to call thread_get_state () on mach_thread_self (), so
this codepath cannot be used as-is to fork the calling thread's TLS.
Fortunately we can use THREAD_SELF (aka %fs:0x0) to find out the value
of our fs_base without calling into the kernel.
Fixes: f6cf701efc
"hurd: Implement TLS for x86_64"
Checked on x86_64-gnu: fork () now works!
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-8-bugaevc@gmail.com>
Unlike sigstate->thread, tcb->self did not hold a Mach port reference on
the thread port it names. This means that the port can be deallocated,
and the name reused for something else, without anyone noticing. Using
tcb->self will then lead to port use-after-free.
Fortunately nothing was accessing tcb->self, other than it being
intially set to then-valid thread port name upon TCB initialization. To
assert that this keeps being the case without altering TCB layout,
rename self -> self_do_not_use, and stop initializing it.
Also, do not (re-)allocate a whole separate and unused stack for the
main thread, and just exit __pthread_setup early in this case.
Found upon attempting to use tcb->self and getting unexpected crashes.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-7-bugaevc@gmail.com>
...instead of mach_setup_thread (), which is unsuitable for setting up
function calls.
Checked on x86_64-gnu: the signal thread no longer crashes upon trying
to process a message.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-6-bugaevc@gmail.com>
