Since only Intel processors with AVX2 have fast unaligned load, we
should set index_arch_AVX_Fast_Unaligned_Load only for Intel processors.
Move AVX, AVX2, AVX512, FMA and FMA4 detection into get_common_indeces
and call get_common_indeces for other processors.
Add CPU_FEATURES_CPU_P and CPU_FEATURES_ARCH_P to aoid loading
GLRO(dl_x86_cpu_features) in cpu-features.c.
[BZ #19583]
* sysdeps/x86/cpu-features.c (get_common_indeces): Remove
inline. Check family before setting family, model and
extended_model. Set AVX, AVX2, AVX512, FMA and FMA4 usable
bits here.
(init_cpu_features): Replace HAS_CPU_FEATURE and
HAS_ARCH_FEATURE with CPU_FEATURES_CPU_P and
CPU_FEATURES_ARCH_P. Set index_arch_AVX_Fast_Unaligned_Load
for Intel processors with usable AVX2. Call get_common_indeces
for other processors with family == NULL.
* sysdeps/x86/cpu-features.h (CPU_FEATURES_CPU_P): New macro.
(CPU_FEATURES_ARCH_P): Likewise.
(HAS_CPU_FEATURE): Use CPU_FEATURES_CPU_P.
(HAS_ARCH_FEATURE): Use CPU_FEATURES_ARCH_P.
This patch removes the __ASSUME_GETDENTS64_SYSCALL macro, as its
definition is constant given the new kernel version requirements (and
was constant anyway before those requirements except for MIPS n32).
Note that the "#ifdef __NR_getdents64" conditional *is* still needed,
because MIPS n64 only has the getdents syscall (being a 64-bit ABI,
that syscall is 64-bit; the difference between the two on 64-bit
architectures is where d_type goes). If MIPS n64 were to gain the
getdents64 syscall and we wanted to use it conditionally on the kernel
version at runtime we'd have to revert this patch, but I think that's
unlikely (and in any case, we could follow the simpler approach of
undefining __NR_getdents64 if the syscall can't be assumed, just like
we do for accept4 / recvmmsg / sendmmsg syscalls on architectures
where socketcall support came first).
Most of the getdents.c changes are reindentation.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_GETDENTS64_SYSCALL): Remove macro.
* sysdeps/unix/sysv/linux/getdents.c
[!__ASSUME_GETDENTS64_SYSCALL]: Remove conditional code.
[!have_no_getdents64_defined]: Likewise.
(__GETDENTS): Remove __have_no_getdents64 conditional.
Current Linux kernel version requirements mean the signalfd4 syscall
can always be assumed to be available. This patch removes
__ASSUME_SIGNALFD4 and associated conditionals.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_SIGNALFD4):
Remove macro.
* sysdeps/unix/sysv/linux/signalfd.c: Do not include
<kernel-features.h>.
(signalfd) [__NR_signalfd4]: Make code unconditional.
(signalfd) [!__ASSUME_SIGNALFD4]: Remove conditional code.
This patch fixes the implicit check style add in 2a69f853c for the
general convention one.
Checked on x86_64.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Fix implict checks
style.
When PLT may be used, JUMPTARGET should be used instead calling the
function directly.
* sysdeps/unix/sysv/linux/x86_64/cancellation.S
(__pthread_enable_asynccancel): Use JUMPTARGET to call
__pthread_unwind.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
(__condvar_cleanup2): Use JUMPTARGET to call _Unwind_Resume.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
(__condvar_cleanup1): Likewise.
Current Linux posix_spawn spawn do not test if the pid argument is
valid before trying to update it for success case. This patch fixes
it.
Tested on x86_64 and i686.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Fix invalid memory
access where posix_spawn success and pid argument is null.
* posix/tst-spawn.c (do_test): Add posix_spawn null pid argument for
success case.
* sysdeps/generic/dl-fcntl.h: New file, adds attribute_hidden to __open
and __fcntl.
* sysdeps/mach/hurd/dl-fcntl.h: New file, adds attribute_hidden to
__fcntl only.
* include/fcntl.h [IS_IN (rtld)]: Include <dl-fcntl.h> instead of
adding attribute_hidden to __open and __fcntl.
Generating errnos.d does not actually need libc-modules.h.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)errnos.d): Strip
"-include $(common-objpfx)libc-modules.h" from CPPFLAGS, and do not
depend on libc-modules.h,
Given current Linux kernel version requirements, we can assume the
presence of the eventfd2 syscall. This means that __ASSUME_EVENTFD2
can be removed, and a syscalls.list entry suffices for eventfd instead
of needing a .c file. This patch implements those changes.
Tested for x86_64 and x86 (not that that means much, given the lack of
testsuite coverage for eventfd).
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_EVENTFD2):
Remove macro.
* sysdeps/unix/sysv/linux/eventfd.c: Remove file.
* sysdeps/unix/sysv/linux/syscalls.list (eventfd): New syscall
entry.
Given current Linux kernel version requirements, we can always assume
the fallocate syscall to be available. This patch removes
__ASSUME_FALLOCATE and a test for whether __NR_fallocate is defined.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_FALLOCATE):
Remove macro.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate.c: Do not
include <kernel-features.h>.
[!__ASSUME_FALLOCATE]: Remove conditional code.
(posix_fallocate) [__NR_fallocate]: Make code unconditional.
When building on i686, x86_64, and arm, and with NDEBUG, or --with-cpu
there are various variables and functions which are unused based on
these settings.
This patch marks all such variables with __attribute__((unused)) to
avoid the compiler warnings when building with the aformentioned
options.
With current kernel version requirements, the ppoll Linux syscall can
be assumed to be present on all architectures; this patch removes the
__ASSUME_PPOLL macro and conditionals on it and on whether __NR_ppoll
is defined. (Note that the same can't yet be done for pselect,
because MicroBlaze only wired that up in the syscall table in 3.15.)
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_PPOLL):
Remove macro.
* sysdeps/unix/sysv/linux/ppoll.c: Do not include
<kernel-features.h>.
[__NR_ppoll]: Make code unconditional.
[!__ASSUME_PPOLL]: Remove conditional code.
This patch adjusts the defaults for kernel-features.h macros relating
to availability of accept4, recvmmsg and sendmmsg. It is not intended
to affect which macros end up getting defined in any configuration.
At present, all architectures with syscalls for those functions need
to define __ASSUME_*_SYSCALL macros; in particular, any new
architecture needs its own kernel-features.h file for that purpose,
though it may not otherwise need such a header. Those macros are then
used together with __ASSUME_SOCKETCALL to define macros for whether
the functions in question are available.
This patch changes the defaults so that the syscalls are assumed to be
available by default with recent-enough kernels, and it is the
responsibility of architecture headers to undefine the macros if they
are unavailable in supported kernels at least as recent as the version
where the architecture-independent functionality was introduced. The
__ASSUME_<function> macros are defaulted similarly instead of being
defined based on other macros (defining based on other macros would no
longer work because the #undefs appear after the generic header is
included), so where the syscall being unavailable means the function
is unavailable this means the architecture header has to undefine the
__ASSUME_<function> macro; this only affects __ASSUME_ACCEPT4 for
ia64, as other cases where the syscalls were added late enough to be
relevant with current kernel version requirements are all on
socketcall architectures.
As a consequence, the AArch64 and Nios II kernel-features.h header
files are removed, and others simplified. When the minimum kernel
version becomes 4.3 or later on all architectures, the syscalls in
question can just be assumed unconditionally, permitting further
simplification.
Tested for x86_64, x86 and powerpc (that installed shared libraries
are unchanged by the patch, and testsuite for x86_64 and x86).
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Define unconditionally.
(__ASSUME_ACCEPT4): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Define.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h: Remove file.
* sysdeps/unix/sysv/linux/nios2/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
[__LINUX_KERNEL_VERSION < 0x030300] (__ASSUME_ACCEPT4): Undefine.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
This patch updates the glibc headers with the defines MADV_FREE,
IPV6_HDRINCL and EPOLLEXCLUSIVE that are added in Linux 4.5.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/mman-linux.h [__USE_MISC] (MADV_FREE): New macro.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_MISC]
(MADV_FREE): Likewise.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_HDRINCL): Likewise.
* sysdeps/unix/sysv/linux/sys/epoll.h (enum EPOLL_EVENTS): Add
EPOLLEXCLUSIVE.
index_* and bit_* macros are used to access cpuid and feature arrays o
struct cpu_features. It is very easy to use bits and indices of cpuid
array on feature array, especially in assembly codes. For example,
sysdeps/i386/i686/multiarch/bcopy.S has
HAS_CPU_FEATURE (Fast_Rep_String)
which should be
HAS_ARCH_FEATURE (Fast_Rep_String)
We change index_* and bit_* to index_cpu_*/index_arch_* and
bit_cpu_*/bit_arch_* so that we can catch such error at build time.
[BZ #19762]
* sysdeps/unix/sysv/linux/x86_64/64/dl-librecon.h
(EXTRA_LD_ENVVARS): Add _arch_ to index_*/bit_*.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.h (bit_*): Renamed to ...
(bit_arch_*): This for feature array.
(bit_*): Renamed to ...
(bit_cpu_*): This for cpu array.
(index_*): Renamed to ...
(index_arch_*): This for feature array.
(index_*): Renamed to ...
(index_cpu_*): This for cpu array.
[__ASSEMBLER__] (HAS_FEATURE): Add and use field.
[__ASSEMBLER__] (HAS_CPU_FEATURE)): Pass cpu to HAS_FEATURE.
[__ASSEMBLER__] (HAS_ARCH_FEATURE)): Pass arch to HAS_FEATURE.
[!__ASSEMBLER__] (HAS_CPU_FEATURE): Replace index_##name and
bit_##name with index_cpu_##name and bit_cpu_##name.
[!__ASSEMBLER__] (HAS_ARCH_FEATURE): Replace index_##name and
bit_##name with index_arch_##name and bit_arch_##name.
In makecontext the FDE needs to be terminated before the return
trampoline otherwise backtrace called within a context created by
makecontext yields infinite backtrace.
This bug has been present for a long time, stdlib/tst-makecontext did
not fail until recent commit e535ce25. Tested on mips-linux-gnu and
mips64el-linux-gnuabi64 and mips-linux-gnu, no regression.
This fixes stdlib/tst-makecontext on MIPS.
Changelog:
[BZ #19792]
* sysdeps/unix/sysv/linux/mips/makecontext.S (__makecontext):
Terminate FDE before return label.
The ldbl-128ibm implementation of nearbyintl uses logic that only
works in round-to-nearest mode. This contrasts with rintl, which
works in all rounding modes.
Now, arguably nearbyintl could simply be aliased to rintl, given that
spurious "inexact" is generally allowed for ldbl-128ibm, even for the
underlying arithmetic operations. But given that the only point of
nearbyintl is to avoid "inexact", this patch follows the more
conservative approach of adding conditionals to the rintl
implementation to make it suitable for use to implement nearbyintl,
then builds it for nearbyintl with USE_AS_NEARBYINTL defined. The
test test-nearbyint-except-2 shows up issues when traps on "inexact"
are enabled, which turn out to be problems with the powerpc
fenv_private.h implementation (two functions that should disable
exception traps potentially failing to do so in some cases); this
patch duly fixes that as well (I don't see any other existing cases
where this would be user-visible; there isn't much use of *_NOEX,
*hold* etc. in libm that requires exceptions to be discarded and not
trapped on).
Tested for powerpc.
[BZ #19790]
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL]
(rintl): Define as macro.
[USE_AS_NEARBYINTL] (__rintl): Likewise.
(__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead
of fesetround. Ensure results are evaluated before end of scope.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define
USE_AS_NEARBYINTL and include s_rintl.c.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc):
Disable exception traps in new environment.
(libc_feholdsetround_ppc_ctx): Likewise.
Since x86 has an optimized mempcpy and GCC can inline mempcpy on x86,
define _HAVE_STRING_ARCH_mempcpy to 1 for x86.
[BZ #19759]
* sysdeps/x86/bits/string.h (_HAVE_STRING_ARCH_mempcpy): New.
The operand modifier %s on powerpc is an undocumented internal implementation
detail of GCC. Besides that, the GCC community wants to remove it. This patch
rewrites the expressions that use this modifier with logically equivalent
expressions that don't require it.
Explanation for the substitution:
The %s modifier takes an immediate operand and prints 32 less such immediate.
Thus, in the previous code, the expression resulted in:
32 - __builtin_ffs(e)
where e was guaranteed to have exactly a single bit set, by the following
expressions:
(e & (e-1) == 0) : e has at most one bit set.
(e != 0) : e is not zero, thus it has at least one bit set.
Since we guarantee that there is exactly only one bit set, the following
statement is true:
32 - __builtin_ffs(e) == __builtin_clz(e)
Thus, we can replace __builtin_ffs with __builtin_clz and remove the %s operand
modifier.
HWCAP-related code should had been updated when the 32 bits of HWCAP were
used. This patch updates the code in dl-procinfo.h to loop through all
the 32 bits in HWCAP and updates _dl_powerpc_cap_flags accordingly.
The ldbl-128ibm implementation of remainderl has logic resulting in
incorrect tests for equality of the absolute values of the arguments
in the case of zero low parts. If the low parts are both zero but
with different signs, this can wrongly cause equal arguments to be
treated as different, resulting in turn in incorrect signs of zero
result in nondefault rounding modes arising from the subtractions done
when the arguments are not equal.
This patch fixes the logic to convert -0 low parts into +0 before the
comparison (remquo already has separate logic to deal with signs of
zero results, so doesn't need such a change). Tests are added for
remainderl and remquol similar to that for fmodl, and based on a
refactoring of it, since the bug depends on low parts which should not
be relied upon in tests not setting the representation explicitly
(although in fact the bug shows up in test-ldouble with current GCC).
Tested for powerpc.
[BZ #19677]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Put zero low parts in canonical form.
* sysdeps/ieee754/ldbl-128ibm/test-fmodrem-ldbl-128ibm.c: New
file. Based on
sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c.
* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: Replace
with wrapper round test-fmodrem-ldbl-128ibm.c.
* sysdeps/ieee754/ldbl-128ibm/test-remainderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/test-remquol-ldbl-128ibm.c:
Likewise.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
test-remainderl-ldbl-128ibm and test-remquol-ldbl-128ibm.
This patch implements a new posix_spawn{p} implementation for Linux. The main
difference is it uses the clone syscall directly with CLONE_VM and CLONE_VFORK
flags and a direct allocated stack. The new stack and start function solves
most the vfork limitation (possible parent clobber due stack spilling). The
remaning issue are related to signal handling:
1. That no signal handlers must run in child context, to avoid corrupt
parent's state.
2. Child must synchronize with parent to enforce stack deallocation and
to possible return execv issues.
The first one is solved by blocking all signals in child, even NPTL-internal
ones (SIGCANCEL and SIGSETXID). The second issue is done by a stack allocation
in parent and a synchronization with using a pipe or waitpid (in case or error).
The pipe has the advantage of allowing the child signal an exec error (checked
with new tst-spawn2 test).
There is an inherent race condition in pipe2 usage for architectures that do not
support the syscall directly. In such cases the a pipe plus fctnl is used
instead and it may lead to file descriptor leak in parent (as decribed by fcntl
documentation).
The child process stack is allocate with a mmap with MAP_STACK flag using
default architecture stack size. Although it is slower than use a stack buffer
from parent, it allows some slack for the compatibility code to run scripts
with no shebang (which may use a buffer with size depending of argument list
count).
Performance should be similar to the vfork default posix implementation and
way faster than fork path (vfork on mostly linux ports are basically
clone with CLONE_VM plus CLONE_VFORK). The only difference is the syscalls
required for the stack allocation/deallocation.
It fixes BZ#10354, BZ#14750, and BZ#18433.
Tested on i386, x86_64, powerpc64le, and aarch64.
[BZ #14750]
[BZ #10354]
[BZ #18433]
* include/sched.h (__clone): Add hidden prototype.
(__clone2): Likewise.
* include/unistd.h (__dup): Likewise.
* posix/Makefile (tests): Add tst-spawn2.
* posix/tst-spawn2.c: New file.
* sysdeps/posix/dup.c (__dup): Add hidden definition.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/microblaze/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nptl-signals.h
(____nptl_is_internal_signal): New function.
* sysdeps/unix/sysv/linux/spawni.c: New file.
Since we have loaded address of PREINIT_FUNCTION into %rax, we can
avoid extra branch to PLT slot.
[BZ #19745]
* sysdeps/x86_64/crti.S (_init): Replace PREINIT_FUNCTION@PLT
with *%rax in call.
Since __libc_start_main is called very early, lazy binding isn't relevant
here. Use indirect branch via GOT to avoid extra branch to PLT slot.
[BZ #19745]
* sysdeps/x86_64/start.S (_start): __libc_start_main@PLT
with *__libc_start_main@GOTPCREL(%rip) in call.
Chek Fast_Unaligned_Load, instead of Slow_BSF, and also check for
Fast_Copy_Backward to enable __memcpy_ssse3_back. Existing selection
order is updated with following selection order:
1. __memcpy_avx_unaligned if AVX_Fast_Unaligned_Load bit is set.
2. __memcpy_sse2_unaligned if Fast_Unaligned_Load bit is set.
3. __memcpy_sse2 if SSSE3 isn't available.
4. __memcpy_ssse3_back if Fast_Copy_Backward bit it set.
5. __memcpy_ssse3
[BZ #18880]
* sysdeps/x86_64/multiarch/memcpy.S: Check Fast_Unaligned_Load,
instead of Slow_BSF, and also check for Fast_Copy_Backward to
enable __memcpy_ssse3_back.
We should turn on bit_Prefer_MAP_32BIT_EXEC in EXTRA_LD_ENVVARS without
overriding other bits.
[BZ #19758]
* sysdeps/unix/sysv/linux/x86_64/64/dl-librecon.h
(EXTRA_LD_ENVVARS): Or bit_Prefer_MAP_32BIT_EXEC.
No need to compile x86_64 _mcount.S with -pg. We can just copy the
normal static object.
* gmon/Makefile (noprof): Add $(sysdep_noprof).
* sysdeps/x86_64/Makefile (sysdep_noprof): Add _mcount.
Since __mcount_internal and __sigjmp_save are internal to x86-64 libc.so:
3532: 0000000000104530 289 FUNC LOCAL DEFAULT 13 __mcount_internal
3391: 0000000000034170 38 FUNC LOCAL DEFAULT 13 __sigjmp_save
they can be called directly without PLT.
* sysdeps/x86_64/_mcount.S (C_LABEL(_mcount)): Call
__mcount_internal directly.
(C_LABEL(__fentry__)): Likewise.
* sysdeps/x86_64/setjmp.S __sigsetjmp): Call __sigjmp_save
directly.
Now we require Linux 3.2 or later kernel headers everywhere, the
configure test for <linux/fanotify.h> is obsolete; this patch removes
it.
Tested for x86_64.
* sysdeps/unix/sysv/linux/configure.ac (linux/fanotify.h): Do not
test for header.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* config.h.in (HAVE_LINUX_FANOTIFY_H): Remove #undef.
* sysdeps/unix/sysv/linux/tst-fanotify.c [!HAVE_LINUX_FANOTIFY_H]:
Remove conditional code.
[HAVE_LINUX_FANOTIFY_H]: Make code unconditional.
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I
proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since
Linux 2.6.32 has reached EOL.
In the discussion in February, some concerns were expressed about
compatibility with OpenVZ containers. It's not clear that these are
real issues, given OpenVZ backporting kernel features and faking the
kernel version for guest software, as discussed in
<https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's
also not clear that supporting running GNU/Linux distributions from
late 2016 (at the earliest) on a kernel series from 2009 is a sensible
expectation. However, as an interim step, this patch increases the
requirement everywhere except x86 / x86_64 (since the controversy was
only about those architectures); the special caveats and settings can
easily be removed later when we're ready to increase the requirements
on x86 / x86_64 (and if someone would like to raise the issue on LWN
as suggested in the previous discussion, that would be welcome). 3.2
kernel headers are required everywhere by this patch.
(x32 already requires 3.4 or later, so is unaffected by this patch.)
As usual for such a change, this patch only changes the configure
scripts and associated documentation. The intent is to follow up with
removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_*
or other macro that becomes dead can then be removed independently.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Define to 3.2.0.
(arch_minimum_kernel): Likewise.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Define to 2.6.32.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Define to 2.6.32.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Document Linux 3.2 requirement.
* manual/install.texi (Linux): Document Linux 3.2 headers
requirement.
* INSTALL: Regenerated.
Due to GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58066
__tls_get_addr may be called with 8-byte stack alignment. Although
this bug has been fixed in GCC 4.9.4, 5.3 and 6, we can't assume
that stack will be always aligned at 16 bytes. Since SSE optimized
memory/string functions with aligned SSE register load and store are
used in the dynamic linker, we must set DL_RUNTIME_UNALIGNED_VEC_SIZE
to 8 so that _dl_runtime_resolve_sse will align the stack before
calling _dl_fixup:
Dump of assembler code for function _dl_runtime_resolve_sse:
0x00007ffff7deea90 <+0>: push %rbx
0x00007ffff7deea91 <+1>: mov %rsp,%rbx
0x00007ffff7deea94 <+4>: and $0xfffffffffffffff0,%rsp
^^^^^^^^^^^ Align stack to 16 bytes
0x00007ffff7deea98 <+8>: sub $0x100,%rsp
0x00007ffff7deea9f <+15>: mov %rax,0xc0(%rsp)
0x00007ffff7deeaa7 <+23>: mov %rcx,0xc8(%rsp)
0x00007ffff7deeaaf <+31>: mov %rdx,0xd0(%rsp)
0x00007ffff7deeab7 <+39>: mov %rsi,0xd8(%rsp)
0x00007ffff7deeabf <+47>: mov %rdi,0xe0(%rsp)
0x00007ffff7deeac7 <+55>: mov %r8,0xe8(%rsp)
0x00007ffff7deeacf <+63>: mov %r9,0xf0(%rsp)
0x00007ffff7deead7 <+71>: movaps %xmm0,(%rsp)
0x00007ffff7deeadb <+75>: movaps %xmm1,0x10(%rsp)
0x00007ffff7deeae0 <+80>: movaps %xmm2,0x20(%rsp)
0x00007ffff7deeae5 <+85>: movaps %xmm3,0x30(%rsp)
0x00007ffff7deeaea <+90>: movaps %xmm4,0x40(%rsp)
0x00007ffff7deeaef <+95>: movaps %xmm5,0x50(%rsp)
0x00007ffff7deeaf4 <+100>: movaps %xmm6,0x60(%rsp)
0x00007ffff7deeaf9 <+105>: movaps %xmm7,0x70(%rsp)
[BZ #19679]
* sysdeps/x86_64/dl-trampoline.S (DL_RUNIME_UNALIGNED_VEC_SIZE):
Renamed to ...
(DL_RUNTIME_UNALIGNED_VEC_SIZE): This. Set to 8.
(DL_RUNIME_RESOLVE_REALIGN_STACK): Renamed to ...
(DL_RUNTIME_RESOLVE_REALIGN_STACK): This. Updated.
(DL_RUNIME_RESOLVE_REALIGN_STACK): Renamed to ...
(DL_RUNTIME_RESOLVE_REALIGN_STACK): This.
* sysdeps/x86_64/dl-trampoline.h
(DL_RUNIME_RESOLVE_REALIGN_STACK): Renamed to ...
(DL_RUNTIME_RESOLVE_REALIGN_STACK): This.
The ldbl-128ibm implementation of nextafterl / nexttowardl returns -0
in FE_DOWNWARD mode when taking the next value below the least
positive subnormal, when it should return +0. This patch fixes it to
check explicitly for this case.
Tested for powerpc.
[BZ #19678]
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Ensure +0.0 is returned when taking the next value below the least
positive value.
The ldbl-128ibm implementation of powl has some problems in the case
of overflow or underflow, which are mainly visible in non-default
rounding modes.
* When overflow or underflow is detected early, the correct sign of an
overflowing or underflowing result is not allowed for. This is
mostly hidden in the default rounding mode by the errno-setting
wrappers recomputing the result (except in non-default
error-handling modes such as -lieee), but visible in other rounding
modes where a result that is not zero or infinity causes the
wrappers not to do the recomputation.
* The final scaling is done before the sign is incorporated in the
result, but should be done afterwards for correct overflowing and
underflowing results in directed rounding modes.
This patch fixes those problems. Tested for powerpc.
[BZ #19674]
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Include
sign in overflowing and underflowing results when overflow or
underflow is detected early. Include sign in result before rather
than after scaling.
The ldbl-128ibm implementations of remainderl and remquol have logic
resulting in incorrect tests for equality of the absolute values of
the arguments. Equality is tested based on the integer
representations of the high and low parts, with the sign bit masked
off the high part - but when this changes the sign of the high part,
the sign of the low part needs to be changed as well, and failure to
do this means arguments are wrongly treated as equal when they are
not.
This patch fixes the logic to adjust signs of low parts as needed.
Tested for powerpc.
[BZ #19603]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Adjust sign of integer version of low part
when taking absolute value of high part.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
* math/libm-test.inc (remainder_test_data): Add another test.
(remquo_test_data): Likewise.
The ldbl-128ibm implementation of fmodl has logic to detect when the
first argument has absolute value less than or equal to the second.
This logic is only correct for nonzero low parts; if the high parts
are equal and the low parts are zero, then the signs of the low parts
(which have no semantic effect on the value of the long double number)
can result in equal values being wrongly treated as unequal, and an
incorrect result being returned from fmodl. This patch fixes this by
checking for the case of zero low parts.
Although this does show up in tests from libm-test.inc (both tests of
fmodl, and, indirectly, of remainderl / dreml), the dependence on
non-semantic zero low parts means that test shouldn't be expected to
reproduce it reliably; thus, this patch adds a standalone test that
sets up affected values using unions.
Tested for powerpc.
[BZ #19602]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Handle
equal high parts and both low parts zero specially.
* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: New test.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-fmodl-ldbl-128ibm.
The ldbl-128ibm implementation of fmodl has completely bogus logic for
subnormal results (in this context, that means results for which the
result is in the subnormal range for double, not results with absolute
value below LDBL_MIN), based on code used for ldbl-128 that is correct
in that case but incorrect in the ldbl-128ibm use. This patch fixes
it to convert the mantissa into the correct form expected by
ldbl_insert_mantissa, removing the other cases of the code that were
incorrect and in one case unreachable for ldbl-128ibm. A correct
exponent value is then passed to ldbl_insert_mantissa to reflect the
shifted result.
Tested for powerpc.
[BZ #19595]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Use
common logic for all cases of shifting subnormal results. Do not
insert sign bit in shifted mantissa. Always pass -1023 as biased
exponent to ldbl_insert_mantissa in subnormal case.
The ldbl-128ibm implementation of roundl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). This patch reimplements it along
the lines used for floorl, ceill and truncl, using __round on the high
part, and on the low part if the high part is an integer, and then
adjusting in the cases where this is incorrect.
Tested for powerpc.
[BZ #19594]
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Use __round
on high and low parts then adjust result and use
ldbl_canonicalize_int if needed.
The ldbl-128ibm implementation of truncl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of trunc, when it seems more
natural to take the truncation of the high part (__trunc optimized
inline versions can be used), and the floor or ceiling of the low part
(depending on the sign of the high part) if the high part is an
integer, as was done for floorl and ceill. This patch makes it use
that simpler approach.
Tested for powerpc.
[BZ #19593]
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Use __trunc
on high part and __floor or __ceil on low part then use
ldbl_canonicalize_int if needed.
The ldbl-128ibm implementation of ceill is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of ceil, when it seems more
natural to take the ceiling of the high part (__ceil optimized inline
versions can be used), and that of the low part if the high part is an
integer, as was done for floorl. This patch makes it use that simpler
approach.
Tested for powerpc.
[BZ #19592]
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Use __ceil on
high and low parts then use ldbl_canonicalize_int if needed.
The ldbl-128ibm implementation of floorl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases going beyond the incorrect signs of
zero results noted in bug 17899). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of floor, when it seems more
natural to take the floor of the high part (__floor optimized inline
versions can be used), and that of the low part if the high part is an
integer. This patch makes it use that simpler approach, with a
canonicalization that works in all rounding modes (given that the only
way the result can be noncanonical is if taking the floor of a
negative noninteger low part increased its exponent).
Tested for powerpc, where over a thousand failures are removed from
test-ldouble.out (floorl problems affect many powl tests).
[BZ #17899]
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
New function.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Use __floor
on high and low parts then use ldbl_canonicalize_int if needed.
As discussed in
https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html
the setting of _STRING_ARCH_unaligned currently controls the external
GLIBC ABI as well as selecting the use of unaligned accesses withing
GLIBC.
Since _STRING_ARCH_unaligned was recently changed for AArch64, this
would potentially break the ABI in GLIBC 2.23, so split the uses and add
_STRING_INLINE_unaligned to select the string ABI. This setting must be
fixed for each target, while _STRING_ARCH_unaligned may be changed from
release to release. _STRING_ARCH_unaligned is used unconditionally in
glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't
included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and
may change between glibc releases, it should be made private to glibc.
_STRING_ARCH_unaligned should defined in the new string_private.h heade
file which is included unconditionally from internal <string.h> for glibc
build.
[BZ #19462]
* bits/string.h (_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* include/string.h: Include <string_private.h>.
* string/bits/string2.h: Replace _STRING_ARCH_unaligned with
_STRING_INLINE_unaligned.
* sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed.
(_STRING_INLINE_unaligned): New.
* sysdeps/aarch64/string_private.h: New file.
* sysdeps/generic/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/string_private.h: Likewise.
* sysdeps/s390/string_private.h: Likewise.
* sysdeps/x86/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/bits/string.h
(_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
Since libmvec_nonshared.a may be linked into shared objects, ALIAS_IMPL
should use PIC relocation.
[BZ #19590]
* sysdeps/x86_64/fpu/svml_finite_alias.S (ALIAS_IMPL): Use PIC
relocation.
The handling of negative offsets in MIPS mmap is inconsistent with
other architectures, as shown by failure of the test
posix/tst-mmap-offset for o32 and n32. The MIPS mmap syscall uses a
signed argument and does a signed arithmetic shift on it, whereas the
glibc semantics expected by that test are for the offset to be
considered as a large positive offset. This patch makes MIPS
consistent with other architectures as far as possible by using the
mmap2 syscall on o32 (#including the generic implementation), and
making mmap not an alias for mmap64 for n32, with a custom
implementation for n32 that zero-extends the offset argument to 64-bit
before calling the mmap syscall.
Tested for MIPS64 (o32, n32, n64).
[BZ #19550]
* sysdeps/unix/sysv/linux/mips/mips32/mmap.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/mmap64.c: Move to ....
* sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: ... here.
* sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: New file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (mmap64):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list (mmap):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (mmap): Remove
syscall entry.
The MIPS memcpy optimizations at
<https://sourceware.org/ml/libc-alpha/2015-10/msg00597.html>
introduced a bug causing many string function tests to fail with
segfaults for n32 and n64:
FAIL: string/stratcliff
FAIL: string/test-bcopy
FAIL: string/test-memccpy
FAIL: string/test-memcmp
FAIL: string/test-memcpy
FAIL: string/test-memmove
FAIL: string/test-mempcpy
FAIL: string/test-stpncpy
FAIL: string/test-strncmp
FAIL: string/test-strncpy
(Some failures in other directories could also be caused by this bug.)
The problem is that after the check for whether a word of input is
left that can be copied as a word before moving to byte copies, a load
can occur in the branch delay slot, resulting in a segfault if we are
at the end of a page and the following page is unmapped. I don't see
how this would have passed the tests as reported in the original patch
posting (different kernel configurations affecting the code setting up
unmapped pages, maybe?), since the tests in question don't appear to
have changed recently.
This patch moves a later instruction into the delay slot, as suggested
at <https://sourceware.org/ml/libc-alpha/2016-01/msg00584.html>.
Tested for n32 and n64.
2016-01-28 Steve Ellcey <sellcey@imgtec.com>
Joseph Myers <joseph@codesourcery.com>
* sysdeps/mips/memcpy.S (MEMCPY_NAME) [USE_DOUBLE]: Avoid word
load in branch delay slot when less than a word of input left.
Complement the addition of the required kernel support, present upstream
as from commit 2b5e869ecfcb3112f7e1267cb0328f3ff6d49b18 ("MIPS: ELF:
Interpret the NAN2008 file header flag") and released with Linux 4.5-rc1
on Jan 24th, 2016.
* sysdeps/unix/sysv/linux/mips/configure.ac: Set
`arch_minimum_kernel' to 4.5.0 if 2008 NaN encoding is used.
* sysdeps/unix/sysv/linux/mips/configure: Regenerate.
The changes to restrict implementation-namespace symbol aliases such
as __finitel to compat symbols used code for __finitel in libm
analogous to that for __finitel in libc. However, the versions for
the two symbols are actually different, GLIBC_2.0 in libc and
GLIBC_2.1 in libm. This patch fixes the handling of the libm compat
symbol.
Tested for mips (o32), where it fixes an ABI test failure.
* sysdeps/ieee754/dbl-64/s_finite.c
[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Define
compat symbol at version GLIBC_2_1 and use GLIBC_2_1 in
SHLIB_COMPAT condition for libm, not GLIBC_2_0.
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c
[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Likewise.
Testing for powerpc-nofpu showed that localplt.data was out of date.
Two new soft-fp functions showed up in the list: __gtsf2 and
__unordsf2; this patch adds these as optional. __signbit and
__signbitl no longer appear as local PLT entries; given the move to
__builtin_signbit* for all GCC versions supported for building glibc
(and given the use of the type-generic signbit macro within glibc),
those can safely be removed from the list, which this patch does.
Tested for powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data
(__gtsf2): Add as optional for libc.so.
(__unordsf2): Likewise.
(__signbit): Remove for libc.so.
(__signbitl): Likewise.
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
I've regenerated ulps from scratch for s390/s390x.
All math testcases are passing afterwards.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
I get some math test-failures on s390 for float/double/ldouble for
various lrint/lround functions like:
lrint (0x1p64): Exception "Inexact" set
lrint (-0x1p64): Exception "Inexact" set
lround (0x1p64): Exception "Inexact" set
lround (-0x1p64): Exception "Inexact" set
...
GCC emits "convert to fixed" instructions for casting floating point
values to integer values. These instructions raise invalid and inexact
exceptions if the floating point value exceeds the integer type ranges.
This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in
order to avoid a cast from floating point to integer type and raise the
invalid exception with feraiseexcept.
The ldbl-128 rint/round functions are now using the same logic.
ChangeLog:
[BZ #19486]
* sysdeps/s390/fix-fp-int-convert-overflow.h: New File.
* sysdeps/generic/fix-fp-int-convert-overflow.h
(FIX_LDBL_LONG_CONVERT_OVERFLOW,
FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define.
* sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise.
* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h:
Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl):
Avoid conversions to long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl):
Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl):
Avoid conversions to long long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl):
Likewise.
The previous barrier implementation did not fulfill the POSIX requirements
for when a barrier can be destroyed. Specifically, it was possible that
threads that haven't noticed yet that their round is complete still access
the barrier's memory, and that those accesses can happen after the barrier
has been legally destroyed.
The new algorithm does not have this issue, and it avoids using a lock
internally.
GLIBC benchtest testcases shows SSE2_Unaligned based implementations
are performing faster compare to SSE2 based implementations for
routines: strcmp, strcat, strncat, stpcpy, stpncpy, strcpy, strncpy
and strstr. Flag index_Fast_Unaligned_Load is set for Excavator family
0x15h CPU's. This makes SSE2_Unaligned based implementations as
default for these routines.
[BZ #19467]
* sysdeps/x86/cpu-features.c (init_cpu_features): Set
index_Fast_Unaligned_Load flag for Excavator family CPUs.
Preparation for gcc -fsplit-stack support (gcc bug #68191). The new
field is basically identical to the one on x86. Its TCB offset needs
to be constant, as it'll be hardcoded in gcc.
ChangeLog:
* sysdeps/s390/nptl/tls.h (struct tcbhead_t): Add __private_ss field.
This patch adds some new header definitions from Linux 4.4:
* MCL_ONFAULT is added to bits/mman.h / bits/mman-linux.h (this was
already done for hppa).
* PTRACE_SECCOMP_GET_FILTER is added to sys/ptrace.h. Along with it,
the older PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, added in Linux
3.11 but missed at the time, are also added.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/mman-linux.h [!MCL_CURRENT] (MCL_ONFAULT): New macro.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_GETSIGMASK): New
enum constant and macro.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
Work around a GCC behavior with hardware transactional memory built-ins.
GCC doesn't treat the PowerPC transactional built-ins as compiler
barriers, moving instructions past the transaction boundaries and
altering their atomicity.
The attached patch fixes dladdr on hppa.
Instead of using the generic version of _dl_lookup_address, we use an
implementation more or less modeled after __canonicalize_funcptr_for_compare()
in gcc. The function pointer is analyzed and if it points to the
trampoline used to call _dl_runtime_resolve just before the global
offset table, then we call _dl_fixup to resolve the function pointer.
Then, we return the instruction pointer from the first word of the
descriptor.
The change fixes the testcase provided in [BZ #19415] and the Debian
nss package now builds successfully.
We define __ASSUME_ST_INO_64_BIT by default for Linux targets, and then
undef it for alpha/sh targets. But the code that uses it looks at its
value (as 0/1) rather than whether it's defined (like all other assume
knobs). Change the code to see if it's defined to fix build Wundef build
errors for alpha/sh.
