Verify that wcsncmp (L("abc"), L("abd"), SIZE_MAX) == 0. The new test
fails without
commit ddf0992cf5
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:21 2022 -0600
x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755]
and
commit 7e08db3359
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:28 2022 -0600
x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755]
This is for BZ #28755.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
On Microblaze only __NR_newselect is implemented, even though kernel
advertise __NR_select on asm/unistd.h. Since microblaze is the
only architecture that undef __ASSUME_PSELECT, the generic code
change is simpler than chaging the architecture syscall number.
Acked-by: Mark Hatle <mark.hatle@xilinx.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.16. (There are no new MAP_* constants covered by this test in
5.16 that need any other header changes.)
Tested with build-many-glibcs.py.
The __sem_check_add_mapping internal stat calls fails with
EOVERFLOW if system time is larger than 32 bit.
It is a missing spot from 52a5fe70a2 fix to use 64 bit stat
internally.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Logic can read before the start of `s1` / `s2` if both `s1` and `s2`
are near the start of a page. To avoid having the result contimated by
these comparisons the `strcmp` variants would mask off these
comparisons. This was missing in the `strncmp` variants causing
the bug. This commit adds the masking to `strncmp` so that out of
range comparisons don't affect the result.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass as
well a full xcheck on x86_64 linux.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The prior sentinel logic was broken and was checking the SIMPLE_MEMSET
as opposed to the tested implementation. As well `s` (the test buffer)
was not reset between implementation tests so it was possible for a
buggy implementation to be hidden by a previously executed correct
one.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since __pthread_key_create might be concurrently reallocating the
__pthread_key_destructors array, it's not safe to access it without the
mutex held. Posix explicitly says we are allowed to prefer performance
over error detection.
commit 3d9f171bfb
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Feb 7 05:55:15 2022 -0800
x86-64: Optimize bzero
added the optimized bzero. Remove bzero weak alias in SS2 memset to
avoid undefined __bzero in memset-sse2-unaligned-erms.
The kernel header might not define the SO_TIMESTAMP{NS}_OLD or
SO_TIMESTAMP{NS}_NEW if it older than v5.1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The test elf/tst-audit2 fails on hppa with a segmentation fault in the
long branch stub used to call malloc from calloc. This occurs because
the test is not a PIC executable and calloc is called from the dynamic
linker before the dp register is initialized in _dl_start_user.
The fix is to move the dp register initialization into
elf_machine_runtime_setup. Since the address of $global$ can't be
loaded directly, we continue to use the DT_PLTGOT value from the
the main_map to initialize dp.
commit 3d9f171bfb
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Feb 7 05:55:15 2022 -0800
x86-64: Optimize bzero
Remove setting the .text section for the code. This commit
adds that back.
Otherwise, <dl-auxv.h> on POWER ends up being included twice,
once in dl-sysdep.c, once in dl-support.c. That leads to a linker
failure due to multiple definitions of _dl_cache_line_size.
Fixes commit d96d2995c1
("Revert "Linux: Consolidate auxiliary vector parsing").
This reverts commit 8c8510ab27. The
revert is not perfect because the commit included a bug fix for
_dl_sysdep_start with an empty argv, introduced in commit
2d47fa6862 ("Linux: Remove
DL_FIND_ARG_COMPONENTS"), and this bug fix is kept.
The revert is necessary because the reverted commit introduced an
early memset call on aarch64, which leads to crash due to lack of TCB
initialization.
The fix for BZ#22716 replacde LD_TRACE_LOADED_OBJECTS with
LD_TRACE_PRELINKING so mtrace could record executable address
position.
To provide the same information, LD_TRACE_LOADED_OBJECTS is
extended where a value or '2' also prints the executable address
as well. It avoid adding another loader environment variable
to be used solely for mtrace. The vDSO will be printed as
a default library (with '=>' pointing the same name), which is
ok since both mtrace and ldd already handles it.
The mtrace script is changed to also parse the new format. To
correctly support PIE and non-PIE executables, both the default
mtrace address and the one calculated as used (it fixes mtrace
for non-PIE exectuable as for BZ#22716 for PIE).
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
And optimize it slightly.
The large switch statement in _dl_sysdep_start can be replaced with
a large array. This reduces source code and binary size. On
i686-linux-gnu:
Before:
text data bss dec hex filename
7791 12 0 7803 1e7b elf/dl-sysdep.os
After:
text data bss dec hex filename
7135 12 0 7147 1beb elf/dl-sysdep.os
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The generic version is the de-facto Linux implementation. It
requires an auxiliary vector, so Hurd does not use it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On hppa, a function pointer returned by la_symbind is actually a function
descriptor has the plabel bit set (bit 30). This must be cleared to get
the actual address of the descriptor. If the descriptor has been bound,
the first word of the descriptor is the physical address of theA function,
otherwise, the first word of the descriptor points to a trampoline in the
PLT.
This patch also adds a workaround on tests because on hppa (and it seems
to be the only ABI I have see it), some shared library adds a dynamic PLT
relocation to am empty symbol name:
$ readelf -r elf/tst-audit25mod1.so
[...]
Relocation section '.rela.plt' at offset 0x464 contains 6 entries:
Offset Info Type Sym.Value Sym. Name + Addend
00002008 00000081 R_PARISC_IPLT 508
[...]
It breaks some assumptions on the test, where a symbol with an empty
name ("") is passed on la_symbind.
Checked on x86_64-linux-gnu and hppa-linux-gnu.
memset with zero as the value to set is by far the majority value (99%+
for Python3 and GCC).
bzero can be slightly more optimized for this case by using a zero-idiom
xor for broadcasting the set value to a register (vector or GPR).
Co-developed-by: Noah Goldstein <goldstein.w.n@gmail.com>
get_nprocs() and get_nprocs_conf() use various methods to obtain an
accurate number of processors. Re-introduce __get_nprocs_sched() as
a source of information, and fix the order in which these methods are
used to return the most accurate information. The primary source of
information used in both functions remains unchanged.
This also changes __get_nprocs_sched() error return value from 2 to 0,
but all its users are already prepared to handle that.
Old fallback order:
get_nprocs:
/sys/devices/system/cpu/online -> /proc/stat -> 2
get_nprocs_conf:
/sys/devices/system/cpu/ -> /proc/stat -> 2
New fallback order:
get_nprocs:
/sys/devices/system/cpu/online -> /proc/stat -> sched_getaffinity -> 2
get_nprocs_conf:
/sys/devices/system/cpu/ -> /proc/stat -> sched_getaffinity -> 2
Fixes: 342298278e ("linux: Revert the use of sched_getaffinity on get_nproc")
Closes: BZ #28865
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
commit b62ace2740
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Feb 6 00:54:18 2022 -0600
x86: Improve vec generation in memset-vec-unaligned-erms.S
Revert usage of 'pshufb' in broadcast logic as it is an SSSE3
instruction and memset.S is restricted to only SSE2 instructions.
Zero is a relevant size for some workloads (roughly 5% of uses for
GCC) so we should be testing it's performance as well.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug.
Split vec generation into multiple steps. This allows the
broadcast in AVX2 to use 'xmm' registers for the L(less_vec)
case. This saves an expensive lane-cross instruction and removes
the need for 'vzeroupper'.
For SSE2 replace 2x 'punpck' instructions with zero-idiom 'pxor' for
byte broadcast.
Results for memset-avx2 small (geomean of N = 20 benchset runs).
size, New Time, Old Time, New / Old
0, 4.100, 3.831, 0.934
1, 5.074, 4.399, 0.867
2, 4.433, 4.411, 0.995
4, 4.487, 4.415, 0.984
8, 4.454, 4.396, 0.987
16, 4.502, 4.443, 0.987
All relevant string/wcsmbs tests are passing.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector tan/tanf and input files to libmvec microbenchmark.
libmvec-tan-inputs:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 5.0
10% uniform random distribution in range (-1000.0, 1000.0)
libmvec-tanf-inputs:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 5.0f
10% uniform random distribution in range (-1000.0f, 1000.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector erfc/erfcf and input files to libmvec microbenchmark.
libmvec-erfc-inputs:
90% Normal random distribution
range: (-6.0, 6.0)
mean: 0.0
sigma: 1.0
10% uniform random distribution in range (-5.9, 5.9)
libmvec-erfcf-inputs:
90% Normal random distribution
range: (-4.0f, 4.0f)
mean: 0.0f
sigma: 1.0f
10% uniform random distribution in range (-3.9f, 3.9f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector asinh/asinhf and input files to libmvec microbenchmark.
libmvec-asinh-inputs:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 2.0
10% uniform random distribution in range (-1.0e6, 1.0e6)
libmvec-asinhf-inputs:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 2.0f
10% uniform random distribution in range (-1.0e6f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector tanh/tanhf and input files to libmvec microbenchmark.
libmvec-tanh-inputs:
90% Normal random distribution
range: (-19.0, 19.0)
mean: 0.0
sigma: 2.0
10% uniform random distribution in range (-16.0, 16.0)
libmvec-tanhf-inputs:
90% Normal random distribution
range: (-10.0f, 10.0f)
mean: 0.0f
sigma: 2.0f
10% uniform random distribution in range (-8.0f, 8.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector erf/erff and input files to libmvec microbenchmark.
libmvec-erf-inputs:
90% Normal random distribution
range: (-6.0, 6.0)
mean: 0.0
sigma: 1.0
10% uniform random distribution in range (-5.9, 5.9)
libmvec-erff-inputs:
90% Normal random distribution
range: (-4.0f, 4.0f)
mean: 0.0f
sigma: 1.0f
10% uniform random distribution in range (-3.9f, 3.9f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector acosh/acoshf and input files to libmvec microbenchmark.
libmvec-acosh-inputs:
90% Normal random distribution
range: (1.0, DBL_MAX)
mean: 1.0
sigma: 8.0
10% uniform random distribution in range (1.0, 1.0e6)
libmvec-acoshf-inputs:
90% Normal random distribution
range: (1.0f, FLT_MAX)
mean: 1.0f
sigma: 4.0f
10% uniform random distribution in range (1.0f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector atanh/atanhf and input files to libmvec microbenchmark.
libmvec-atanh-inputs:
90% Normal random distribution
range: (-1.0, 1.0)
mean: 0.0
sigma: 1.0
10% uniform random distribution in range (-1.0, 1.0)
libmvec-atanhf-inputs:
90% Normal random distribution
range: (-1.0f, 1.0f)
mean: 0.0f
sigma: 1.0f
10% uniform random distribution in range (-1.0f, 1.0f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector log1p/log1pf and input files to libmvec microbenchmark.
libmvec-log1p-inputs:
70% Normal random distribution
range: (-1.0, DBL_MAX)
mean: 0.0
sigma: 50.0
30% uniform random distribution in range (-1.0, 1.0e6)
libmvec-log1pf-inputs:
70% Normal random distribution
range: (-1.0f, FLT_MAX)
mean: 0.0f
sigma: 50.0f
30% uniform random distribution in range (-1.0f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector log2/log2f and input files to libmvec microbenchmark.
libmvec-log2-inputs:
70% Normal random distribution
range: (0.0, DBL_MAX)
mean: 1.0
sigma: 50.0
30% uniform random distribution in range (0.0, 1.0e6)
libmvec-log2f-inputs:
70% Normal random distribution
range: (0.0f, FLT_MAX)
mean: 1.0f
sigma: 50.0f
30% uniform random distribution in range (0.0f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector log10/log10f and input files to libmvec microbenchmark.
libmvec-log10-inputs:
70% Normal random distribution
range: (0.0, DBL_MAX)
mean: 1.0
sigma: 50.0
30% uniform random distribution in range (0.0, 1.0e6)
libmvec-log10f-inputs:
70% Normal random distribution
range: (0.0f, FLT_MAX)
mean: 1.0f
sigma: 50.0f
30% uniform random distribution in range (0.0f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add vector atan2/atan2f and input files to libmvec microbenchmark.
libmvec-atan2-inputs:
arg1:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 4.0
10% uniform random distribution in range (-1.0e6, 1.0e6)
arg2:
90% Normal random distribution
range: (-DBL_MAX, DBL_MAX)
mean: 0.0
sigma: 4.0
10% uniform random distribution in range (-1.0e6, 1.0e6)
libmvec-atan2f-inputs:
arg1:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 4.0f
10% uniform random distribution in range (-1.0e6f, 1.0e6f)
arg2:
90% Normal random distribution
range: (-FLT_MAX, FLT_MAX)
mean: 0.0f
sigma: 4.0f
10% uniform random distribution in range (-1.0e6f, 1.0e6f)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
