Rename x86_cpu_INDEX_7_ECX_1 to x86_cpu_INDEX_7_ECX_15 for the unused bit
15 in ECX from CPUID with EAX == 0x7 and ECX == 0.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
sysdeps/mach/hurd/htl/pt-pthread_self.c: New file.
htl/Makefile: .. Add it to libc routine.
sysdeps/mach/hurd/htl/pt-sysdep.c(__pthread_self): Remove it.
sysdeps/mach/hurd/htl/pt-sysdep.h(__pthread_self): Add hidden propertie.
htl/Versions(__pthread_self) Version it as private symbol.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-3-gfleury@disroot.org>
htl/pt-nthreads.c: new file.
htl/Makefile: Add it to routine.
htl/Versions: version it as private libc symbol.
htl/pt-create.c: remove his definition here.
htl/pt-internal.h: add propertie to it declaration.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-2-gfleury@disroot.org>
As indicated by sparc kernel-features.h, even though sparc64 defines
__NR_pause, it is not supported (ENOSYS). Always use ppoll or the
64 bit time_t variant instead.
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 8 (which is sizeof of uint32_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 8;
ex -= 8;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 17.2549 | 12.0318
x86_64 (Ryzen 9) | normal | 85.4096 | 49.9641
x86_64 (Ryzen 9) | close-exponents | 19.1072 | 15.8224
aarch64 (N1) | subnormal | 10.2182 | 6.81778
aarch64 (N1) | normal | 60.0616 | 20.3667
aarch64 (N1) | close-exponents | 11.5256 | 8.39685
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 11.6662 | 10.8955
armhf (N1) | normal | 69.2759 | 34.1524
armhf (N1) | close-exponents | 13.6472 | 18.2131
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 11 (which is sizeo of uint64_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 11;
ex -= 11;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 19.1584 | 12.5049
x86_64 (Ryzen 9) | normal | 1016.51 | 296.939
x86_64 (Ryzen 9) | close-exponents | 18.4428 | 16.0244
aarch64 (N1) | subnormal | 11.153 | 6.81778
aarch64 (N1) | normal | 528.649 | 155.62
aarch64 (N1) | close-exponents | 11.4517 | 8.21306
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, clz, ctz, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 15.908 | 15.1083
armhf (N1) | normal | 837.525 | 244.833
armhf (N1) | close-exponents | 16.2111 | 21.8182
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^8):
1024 inputs between FLT_MIN and FLT_MAX;
3. Close exponents (ey >= -103 and |x/y| < 2^8): 1024 inputs with
exponents between -10 and 10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Add three different dataset, from random floating point numbers:
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^52):
1024 inputs between DBL_MIN and DBL_MAX;
3. Close exponents (ey >= -907 and |x/y| < 2^52): 1024 inputs with
exponents between -10 and 10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The __warn_unused_result__ attribute is only enabled when fortification
is enabled. Mention that in the document. The rationale for this is
essentially to mitigate against CWE-252:
[1] https://cwe.mitre.org/data/definitions/252.html
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
When THREAD_GETMEM is defined with inline assembly, the compiler may not
optimize away the two reads of _hurd_sigstate. Help it out a little bit
by only reading it once. This also makes for a slightly cleaner code.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-32-bugaevc@gmail.com>
Just like the other existing rtld-str* files, this provides rtld with
usable versions of stpncpy and strncpy.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-22-bugaevc@gmail.com>
The source code is the same as sysdeps/i386/htl/tcb-offsets.sym, but of
course the produced tcb-offsets.h will be different.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-21-bugaevc@gmail.com>
These do not need any changes to be used on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-20-bugaevc@gmail.com>
This is more correct, if only because these fields are defined as having
the type unsigned int in the Mach headers, so casting them to a signed
int and then back is suboptimal.
Also, remove an extra reassignment of uesp -- this is another remnant of
the ecx kludge.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-16-bugaevc@gmail.com>
There's nothing Mach- or Hurd-specific about it; any port that ends
up with rtld pulling in strncpy will need this.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-15-bugaevc@gmail.com>
This was used for the value of libc-lock's owner when TLS is not yet set
up, so THREAD_SELF can not be used. Since the value need not be anything
specific -- it just has to be non-NULL -- we can just use a plain
constant, such as (void *) 1, for this. This avoids accessing the symbol
through GOT, and exporting it from libc.so in the first place.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-12-bugaevc@gmail.com>
In this case, _itoa_word () is already defined inline in the header (see
sysdeps/generic/_itoa.h), and the second definition causes an error.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-11-bugaevc@gmail.com>
hurd/lookup-retry.c is compiled into rtld, the dynamic linker/loader. To
avoid pulling in file_set_size, file_utimens, tty/ctty stuff, more
string/memory code (memmove, strncpy, strcpy), and more strtoul/itoa
code, compile out support for O_TRUNC and FS_RETRY_MAGICAL when building
hurd/lookup-retry.c for rtld. None of that functionality is useful to
rtld during startup anyway. Keep support for FS_RETRY_MAGICAL("/"),
since that does not pull in much, and is required for following absolute
symlinks.
The large number of extra code being pulled into rtld was noticed by
reviewing librtld.map & elf/librtld.os.map in the build tree.
It is worth noting that once libc.so is loaded, the real __open, __stat,
etc. replace the minimal versions used initially by rtld -- this is
especially important in the Hurd port, where the minimal rtld versions
do not use the dtable and just pass real Mach port names as fds. Thus,
once libc.so is loaded, rtld will gain access to the full
__hurd_file_name_lookup_retry () version, complete with FS_RETRY_MAGICAL
support, which is important in case the program decides to
dlopen ("/proc/self/fd/...") or some such.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-9-bugaevc@gmail.com>
...to keep `sigexc' port initialization in one place, and match what the
comments say.
No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-7-bugaevc@gmail.com>
Noone is or should be using __hurd_threadvar_stack_{offset,mask}, we
have proper TLS now. These two remaining variables are never set to
anything other than zero, so any code that would try to use them as
described would just dereference a zero pointer and crash. So remove
them entirely.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-6-bugaevc@gmail.com>
On EXC_BAD_ACCESS, exception subcode is used to pass the faulting memory
address, so it needs to be (at least) pointer-sized. Thus, make it into
a long. This matches the corresponding change in GNU Mach.
Message-Id: <20230319151017.531737-5-bugaevc@gmail.com>
strftime(3) doesn't accept null pointers in any of the parameters.
Cc: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a chunk scanning algorithm to the _int_memalign code
path that reduces heap fragmentation by reusing already aligned chunks
instead of always looking for chunks of larger sizes and splitting
them. The tcache macros are extended to allow removing a chunk from
the middle of the list.
The goal is to fix the pathological use cases where heaps grow
continuously in workloads that are heavy users of memalign.
Note that tst-memalign-2 checks for tcache operation, which
malloc-check bypasses.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is the default since 2.26 and it has bitrotten over the years,
By using it multiple malloc tests fails:
FAIL: malloc/tst-memalign-2
FAIL: malloc/tst-memalign-2-malloc-hugetlb1
FAIL: malloc/tst-memalign-2-malloc-hugetlb2
FAIL: malloc/tst-memalign-2-mcheck
FAIL: malloc/tst-mxfast-malloc-hugetlb1
FAIL: malloc/tst-mxfast-malloc-hugetlb2
FAIL: malloc/tst-tcfree2
FAIL: malloc/tst-tcfree2-malloc-hugetlb1
FAIL: malloc/tst-tcfree2-malloc-hugetlb2
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Without these fixes, the first three included tests segfault (on a
NULL dereference); the fourth aborts on an assertion, which is itself
unnecessary.
Signed-off-by: Julian Squires <julian@cipht.net>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
