For architecture with default 64 bit time_t support, the kernel
does not provide LFS and non-LFS values for F_GETLK, F_GETLK, and
F_GETLK (the default value used for 64 bit architecture are used).
This is might be considered an ABI break, but the currenct exported
values is bogus anyway.
The POSIX lockf is not affected since it is aliased to lockf64,
which already uses the LFS values.
Checked on i686-linux-gnu and the new tests on a riscv32.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The LoongArch glibc was using the value of the SHMLBA macro from common code,
which is __getpagesize() (16k), but this was inconsistent with the value of
the SHMLBA macro in the kernel, which is SZ_64K (64k). This caused several
shmat-related tests in LTP (Linux Test Project) to fail. This commit fixes
the issue by ensuring that the glibc's SHMLBA macro value matches the value
used in the kernel like other architectures.
Use a scratch_buffer rather than either alloca or malloc to reduce the
possibility of a stack overflow.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 6.3 adds new constants MFD_NOEXEC_SEAL and MFD_EXEC. Add these
to bits/mman-shared.h (conditional on MFD_NOEXEC_SEAL not already
being defined, similar to the existing conditional on the older MFD_*
macros).
Tested for x86_64.
Linux 6.3 adds six HWCAP2_SME* constants for AArch64; add them to the
corresponding bits/hwcap.h in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.3. (There are no new
constants covered by these tests in 6.3 that need any other header
changes.)
Tested with build-many-glibcs.py.
So I was able to reproduce the hangs in the original source, and debug
it, and fix it. In doing so, I realized that we can't use anything
complex to trigger the thread because that "anything" might also cause
the expected segfault and force everything out of sync again.
Here's what I ended up with, and it doesn't seem to hang where the
original one hung quite often (in a tight while..end loop). The key
changes are:
1. Calls to futex are error checked, with retries, to ensure that the
futexes are actually doing what they're supposed to be doing. In the
original code, nearly every futex call returned an error.
2. The main loop has checks for whether the thread ran or not, and
"unlocks" the thread if it didn't (this is how the original source
hangs).
Note: the usleep() is not for timing purposes, but just to give the
kernel an excuse to run the other thread at that time. The test will
not hang without it, but is more likely to test the right bugfix
if the usleep() is present.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Linux 6.3 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.3.
Tested with build-many-glibcs.py.
This patch enables libmvec on AArch64. The proposed change is mainly
implementing build infrastructure to add the new routines to ABI,
tests and benchmarks. I have demonstrated how this all fits together
by adding implementations for vector cos, in both single and double
precision, targeting both Advanced SIMD and SVE.
The implementations of the routines themselves are just loops over the
scalar routine from libm for now, as we are more concerned with
getting the plumbing right at this point. We plan to contribute vector
routines from the Arm Optimized Routines repo that are compliant with
requirements described in the libmvec wiki.
Building libmvec requires minimum GCC 10 for SVE ACLE. To avoid raising
the minimum GCC by such a big jump, we allow users to disable libmvec
if their compiler is too old.
Note that at this point users have to manually call the vector math
functions. This seems to be acceptable to some downstream users.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The standards want msg_lspid/msg_lrpid/shm_cpid/shm_lpid to be pid_t, see BZ
23083 and 23085.
We can leave them __rpc_pid_t on i386 for ABI compatibility, but avoid
hitting the issue on 64bit.
The standards want uid/cuid to be uid_t, gid/cgid to be gid_t and mode to be
mode_t, see BZ 23082.
We can leave them short ints on i386 for ABI compatibility, but avoid
hitting the issue on 64bit.
bits/ipc.h ends up being exactly the same in sysdeps/gnu/ and
sysdeps/unix/sysv/linux/, so remove the latter.
There are reports for hang in __check_pf:
https://github.com/JoeDog/siege/issues/4
It is reproducible only under specific configurations:
1. Large number of cores (>= 64) and large number of threads (> 3X of
the number of cores) with long lived socket connection.
2. Low power (frequency) mode.
3. Power management is enabled.
While holding lock, __check_pf calls make_request which calls __sendto
and __recvmsg. Since __sendto and __recvmsg are cancellation points,
lock held by __check_pf won't be released and can cause deadlock when
thread cancellation happens in __sendto or __recvmsg. Add a cancellation
cleanup handler for __check_pf to unlock the lock when cancelled by
another thread. This fixes BZ #20975 and the siege hang issue.
This makes the prefer_map_32bit_exec tunable no longer Linux-specific.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-4-bugaevc@gmail.com>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Instead define the required fields in system dependend files. The only
system dependent definition is FILENAME_MAX, which should match POSIX
PATH_MAX, and it is obtained from either kernel UAPI or mach headers.
Currently set pre-defined value from current kernels.
It avoids a circular dependendy when including stdio.h in
gen-as-const-headers files.
Checked on x86_64-linux-gnu and i686-linux-gnu
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Binutils 2.40 sets EF_LARCH_OBJABI_V1 for shared objects:
$ ld --version | head -n1
GNU ld (GNU Binutils) 2.40
$ echo 'int dummy;' > dummy.c
$ cc dummy.c -shared
$ readelf -h a.out | grep Flags
Flags: 0x43, DOUBLE-FLOAT, OBJ-v1
We need to ignore it in ldconfig or ldconfig will consider all shared
objects linked by Binutils 2.40 "unsupported". Maybe we should stop
setting EF_LARCH_OBJABI_V1 for shared objects, but Binutils 2.40 is
already released and we cannot change it.
For better debug experience use separate code block with extra
cfi_* directives to run child (same as in __clone3).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the clone3 wrapper on ARC. It doesn't care about stack alignment.
All callers should provide an aligned stack.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Between versions v2.11 and v2.12 struct ntptimeval got new fields.
That wasn't a problem because new function ntp_gettimex was created
(and made default) to support new struct. Old ntp_gettime was not
using new fields so it was safe to call with old struct
definition. Then commits 5613afe9e3 and b6ad64b907 (added for
64 bit time_t support), ntp_gettime start setting new fields.
Sets fields manually to maintain compatibility with v2.11 struct
definition.
Resolves#30156
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.2. (There are no new
constants covered by these tests in 6.2 that need any other header
changes, and the removed MAP_VARIABLE for hppa was addressed
separately.)
Tested with build-many-glibcs.py.
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
Linux 6.2 adds six new Arm HWCAP values and two new HWCAP2 values; add
them to glibc's Arm bits/hwcap.h, with corresponding dl-procinfo.c and
dl-procinfo.h updates.
Tested with build-many-glibcs.py for arm-linux-gnueabi.
The Linux kernel upstream commit 71bdea6f798b ("parisc: Align parisc
MADV_XXX constants with all other architectures") dropped the
parisc-specific MADV_* values in favour of the same constants as
other architectures. In the same commit a wrapper was added which
translates the old values to the standard MADV_* values to avoid
breakage of existing programs.
This upstream patch has been downported to all stable kernel trees as
well.
This patch now drops the parisc specific constants from glibc to
allow newly compliled programs to use the standard MADV_* constants.
v2: Added NEWS section, based on feedback from Florian Weimer
Signed-off-by: Helge Deller <deller@gmx.de>
Linux 6.2 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.2.
Tested with build-many-glibcs.py.
Crossing 2GB boundaries with indirect calls and jumps can use more
branch prediction resources on Intel Golden Cove CPU (see the
"Misprediction for Branches >2GB" section in Intel 64 and IA-32
Architectures Optimization Reference Manual.) There is visible
performance improvement on workloads with many PLT calls when executable
and shared libraries are mmapped below 2GB. Add the Prefer_MAP_32BIT_EXEC
bit so that mmap will try to map executable or denywrite pages in shared
libraries with MAP_32BIT first.
NB: Prefer_MAP_32BIT_EXEC reduces bits available for address space
layout randomization (ASLR), which is always disabled for SUID programs
and can only be enabled by the tunable, glibc.cpu.prefer_map_32bit_exec,
or the environment variable, LD_PREFER_MAP_32BIT_EXEC. This works only
between shared libraries or between shared libraries and executables with
addresses below 2GB. PIEs are usually loaded at a random address above
4GB by the kernel.
Linux 6.2 removed the hppa compatibility MAP_VARIABLE define. That
means that, whether or not we remove it in glibc, it needs to be
ignored in tst-mman-consts.py (since this macro comparison
infrastructure expects that new kernel header versions only add new
macros, not remove old ones).
Tested with build-many-glibcs.py for hppa-linux-gnu (Linux 6.2
headers).
The default Linux implementation already handled the Linux generic
ABIs interface used on newer architectures, so there is no need to
Imply the generic any longer.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And remove redundant entries on other architectures Version. The
version for fallocate64 was supposed to be 2.10, but it was then
added to 32-bit platforms in 2.11 because it mistakenly wasn't
exported for them in 2.10 (see the commit message for
1f3615a1c9).
The linux/generic did not exist before 2.15, i.e. when the tile
ports were added (and microblaze did not exist before 2.18), which
explains those differences but also illustrates that "2.11 for 32-bit,
2.10 for 64-bit" should be sufficient since versions older than the
minimum for the architecture are automatically adjusted.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The ARCv2 ABI requires 4 byte stack pointer alignment. Don't allow to
use unaligned child stack in clone. As the stack grows down,
align it down.
This was pointed by misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests. Stack alignmet fixes these tests
fails.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
The powerpc64 ABI requires an initial stackframe so the child can
store/restore the TOC. It is create prior calling clone3 by
adjusting the stack size (since kernel will compute the stack as
stack plus size).
Checked on powerpc64-linux-gnu (power8, kernel 6.0) and
powerpc64le-linux-gnu (power9, kernel 4.18).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
The hard float abi and hard float are different,
Hard float abi: Use float register to pass float type arguments.
Hard float: Enable the hard float ISA feature.
So the with_fp_cond cannot represent these two features. When
-mfloat-abi=softfp, the float abi is soft and hard float is enabled.
So add 'with_hard_float_abi' in preconfigure and define 'CSKY_HARD_FLOAT_ABI'
if float abi is hard, and use 'CSKY_HARD_FLOAT_ABI' to determine
dynamic linker because it is what determines compatibility.
And with_fp_cond is still needed to tell glibc whether to enable
hard floating feature.
In addition, use AC_TRY_COMMAND to test gcc to ensure compatibility
between different versions of gcc. The original way has a problem
that __CSKY_HARD_FLOAT_FPU_SF__ means the target only has single
hard float-points ISA, so it's not defined in CPUs like ck810f.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch enables the option to influence hwcaps and stfle bits used
by the s390 specific ifunc-resolvers. The currently x86-specific
tunable glibc.cpu.hwcaps is also used on s390x to achieve the task. In
addition the user can also set a CPU arch-level like z13 instead of
single HWCAP and STFLE features.
Note that the tunable only handles the features which are really used
in the IFUNC-resolvers. All others are ignored as the values are only
used inside glibc. Thus we can influence:
- HWCAP_S390_VXRS (z13)
- HWCAP_S390_VXRS_EXT (z14)
- HWCAP_S390_VXRS_EXT2 (z15)
- STFLE_MIE3 (z15)
The influenced hwcap/stfle-bits are stored in the s390-specific
cpu_features struct which also contains reserved fields for future
usage.
The ifunc-resolvers and users of stfle bits are adjusted to use the
information from cpu_features struct.
On 31bit, the ELF_MACHINE_IRELATIVE macro is now also defined.
Otherwise the new ifunc-resolvers segfaults as they depend on
the not yet processed_rtld_global_ro@GLIBC_PRIVATE relocation.
Add an optimization to avoid calling clone3 when glibc detects that
there is no kernel support. It also adds __ASSUME_CLONE3, which allows
skipping this optimization and issuing the clone3 syscall directly.
It does not handle the the small window between 5.3 and 5.5 for
posix_spawn (CLONE_CLEAR_SIGHAND was added in 5.5).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It follow the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The clone3 flag resets all signal handlers of the child not set to
SIG_IGN to SIG_DFL. It allows to skip most of the sigaction calls
to setup child signal handling, where previously a posix_spawn
had to issue 2 times NSIG sigaction calls (one to obtain the current
disposition and another to set either SIG_DFL or SIG_IGN).
With POSIX_SPAWN_SETSIGDEF the child will setup the signal for the case
where the disposition is SIG_IGN.
The code must handle the fallback where clone3 is not available. This is
done by splitting __clone_internal_fallback from __clone_internal.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All internal callers of __clone3 should provide an already aligned
stack. Removing the stack alignment in __clone3 is a net gain: it
simplifies the internal function contract (mask/unmask signals) along
with the arch-specific code.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Different than kernel, clone3 returns EINVAL for NULL struct
clone_args or function pointer. This is similar to clone
interface that return EINVAL for NULL function argument.
It also clean up the Linux clone3.h interface, since it not
currently exported.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is no need to issue another sigaction if the disposition is
already SIG_DFL.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel actually verifies it, and a garbage value in the register
causes improper system call failures.
Fixes commit c1c0dea388 ("Linux: Remove epoll_create,
inotify_init from syscalls.list") and commit d1d23b1342
("Lninux: consolidate epoll_create implementation").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch increases the value of SIGSTKSZ and MINSIGSTKSZ
for powerpc64 similar to the kernel commit
2f82ec19757f58549467db568c56e7dfff8af283 to allow
further expansion of the signal stack frame size.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.1. (There are no new
constants covered by these tests in 6.1 that need any other header
changes.)
Tested with build-many-glibcs.py.
Their presence causes stub warnings to be created on architectures
which do not implement them.
Fixes commit d1d23b1342 ("Lninux: consolidate
epoll_create implementation") and commit 842128f160
("Linux: consolidate inotify_init implementation").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A recent GCC change resulted in localplt test failures on sparc64
because of references to _Qp_fgt. This is analogous to all the other
floating-point symbols allowed in localplt.data, so it seems
appropriate to allow this one as well.
Tested with build-many-glibcs.py for sparc64-linux-gnu (GCC mainline),
where it fixes the test failure.
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is currently used for csky, arc, nios2, and or1k. Newer 64 bit
architecture, like riscv32 and loongarch, reimplement it to override
F_GETLK64/F_SETLK64/F_SETLKW64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The includes chain is added on each architecture sysdep.h and
the __NR__llseek hack is moved to lseek.c and lseek64.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is similar to other LFS consolidation, where the non-LFS is only
built if __OFF_T_MATCHES_OFF64_T is not defined and the LFS version
is aliased to non-LFS name if __OFF_T_MATCHES_OFF64_T is defined.
For non-LFS variant, use sendfile syscall if defined, otherwise use
sendfile64 plus the offset overflow check (as generic implementation).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use unlink syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use symlink syscall if defined, otherwise use symlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use rmdir syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use readlink syscall if defined, otherwise readlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use mkdir syscall if defined, otherwise use mkdirat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use link syscall if defined, otherwise use linkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use lchown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use inotify_init syscall if defined, otherwise use inotify_init1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use epoll_create syscall if defined, otherwise use epoll_create1.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use dup2 syscall if defined, otherwise use dup3.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chmod syscall if defined, otherwise use fchmodat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use the generic implementation as the default, since the syscall
is supported by all architectures.
Also cleanup some headers and remove the INTERNAL_SYSCALL_ERROR_P
usage (the INTERNAL_SYSCALL_CALL macro already returns an negative
value if an error occurs).
The linux syscall ABI returns long, so the generic syscall code for
linux should use long for the return value.
This fixes the truncation of the return value of the syscall function
when that does not fit into an int.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently glibc uses in_time_t_range to detects time_t overflow,
and if it occurs fallbacks to 64 bit syscall version.
The function name is confusing because internally time_t might be
either 32 bits or 64 bits (depending on __TIMESIZE).
This patch refactors the in_time_t_range by replacing it with
in_int32_t_range for the case to check if the 64 bit time_t syscall
should be used.
The in_time_t range is used to detect overflow of the
syscall return value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Old applications pass __IPC_64 as part of the command argument because
old glibc did not check for unknown commands, and passed through the
arguments directly to the kernel, without adding __IPC_64.
Applications need to continue doing that for old glibc compatibility,
so this commit enables this approach in current glibc.
For msgctl and shmctl, if no translation is required, make
direct system calls, as we did before the time64 changes. If
translation is required, mask __IPC_64 from the command argument.
For semctl, the union-in-vararg argument handling means that
translation is needed on all architectures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
RISC-V architecture extends the cache information for level 3 cache
in AUX vector in Linux v.6.1-rc1. This patch supports sysconf to get
the level 3 cache information.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems") changed in_time_t_range to assume a 32-bit time_t. This broke
fstatat on MIPSn64 that was using it with a 64-bit time_t due to
difference between stat and stat64. This commit fix that by adding a
MIPSn64 specific version, which bypasses the EOVERFLOW tests.
Resolves: BZ #29730
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The extension header is two 32bit words and in the last header both
should be 0. There is plenty space in the __reserved area, but it's
better not to write more than we mean to.
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
Linux 6.0 adds a constant ADDRB, a termios c_cflag bit, to its
include/uapi/asm-generic/termbits-common.h.
Add it accordingly to glibc's bits/termios-c_cflag.h headers. As
other constants in these headers are generally in octal, I converted
the value to octal to match. As ADDRB isn't in a POSIX-reserved
namespace, I made it conditional on __USE_MISC.
Tested for x86_64.
The current macros uses pid as signed value, which triggers a compiler
warning for process and thread timers. Replace MAKE_PROCESS_CPUCLOCK
with static inline function that expects the pid as unsigned. These
are similar to what Linux does internally.
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.0. (There are no new
constants covered by these tests in 6.0 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.0 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.0.
Tested with build-many-glibcs.py.
Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This
requires emulate the semantic for hurd call (so __arc4random_buf
uses the fallback).
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.19 adds more HWCAP2_* values for AArch64; add these to its
bits/hwcap.h header in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
I.e. from sysdeps/unix/sysv/linux/bits/in.h to netinet/in.h
It is following both the BSD and Linux definitions.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
So far this test checks if pidfd_open-syscall is supported,
which was introduced with linux 5.3.
The process_madvise-syscall was introduced with linux 5.10.
Thus you'll get FAILs if you are running a kernel in between.
This patch adds a check if the first process_madvise-syscall
returns ENOSYS and in this case will fail with UNSUPPORTED.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
exit only terminates the current thread, not the whole process, so it
is the wrong fallback system call in this context. All supported
Linux versions implement the exit_group system call anyway.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 5.18. (There are no
new constants covered by these tests in 5.19, or in 5.17 or 5.18 in
the case of tst-mount-consts.py that previously used version 5.16,
that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.19 has no new syscalls, but enables memfd_secret in the uapi
headers for RISC-V. Update the version number in syscall-names.list
to reflect that it is still current for 5.19 and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
pidfd_getfd can fail for a valid pidfd with errno EPERM for various
reasons in a restricted environment. Use FAIL_UNSUPPORTED in that case.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
