In _dl_tlsdesc_dynamic, there are three 'addi.d sp, sp, -size'
instructions to allocate stack size for Float/LSX/LASX registers.
Every 'addi.d sp, sp, -size' needs a cfi_adjust_cfa_offset because
of sp is used to compute CFA. But only one 'addi.d sp, sp, -size'
will be run according to HWCAP value. And all cfi_adjust_cfa_offset
will be executed in stack unwinding, it result in incorrect CFA.
Change _dl_tlsdesc_dynamic to _dl_tlsdesc_dynamic,
_dl_tlsdesc_dynamic_lsx and _dl_tlsdesc_dynamic_lasx.
Conflicting cfi instructions can be distributed to the three functions.
And cfi instructions can correspond to stack down instructions.
Fix an issue with commit b74121ae4b ("Update.") and prevent a stray
process from being left behind by tst-cancel7 (and also tst-cancelx7,
which is the same test built with '-fexceptions' additionally supplied
to the compiler), which then blocks remote testing until the process has
been killed by hand.
This test case creates a thread that runs an extra copy of the test via
system(3) and using the '--direct' option so that the test wrapper does
not interfere with this instance. This extra copy executes its business
and calls sigsuspend(2) and then never terminates by itself. Instead it
relies on being killed by the main test process directly via a thread
cancellation request or, should that fail, by issuing SIGKILL either at
the conclusion of 'do_test' or by the test driver via 'do_cleanup' where
the test timeout has been hit or the test driver interrupted.
However if the main test process has been instead killed by a signal,
such as due to incorrect execution, before it had a chance to kill the
extra copy of the test case, then the test wrapper will terminate
without running 'do_cleanup' and consequently the extra copy of the test
case will remain forever in its suspended state, and in the remote case
in particular it means that the remote test wrapper will wait forever
for the SSH command to complete.
This has been observed with the 'alpha-linux-gnu' target, where the main
test process triggers SIGSEGV and the test wrapper correctly records:
Didn't expect signal from child: got `Segmentation fault'
in nptl/tst-cancel7.out and terminates, but then the calling SSH command
continues waiting for the remaining process started in the same session
on the remote target to complete.
Address this problem by also registering 'do_cleanup' via atexit(3),
observing that 'support_delete_temp_files' is registered by the test
wrapper before the test initializing function 'do_prepare' is called and
that we call all the functions registered in the reverse of the order in
which they were registered, so it is safe to refer to 'pidfilename' in
'do_cleanup' invoked by exit(3) because by that time temporary files
have not yet been deleted.
A minor inconvenience is that if 'signal_handler' is invoked in the test
wrapper as a result of SIGALRM rather than SIGINT, then 'do_cleanup'
will be called twice, once as a cleanup handler and again by exit(3).
In reality it is harmless though, because issuing SIGKILL is guarded by
a record lock, so if the first call has succeeded in killing the extra
copy of the test case, then the subsequent call will do nothing.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Move the release of the semaphore used to synchronize between an extra
copy of the test run as a separate process and the main test process
until after the PID file has been locked. It is so that if the cleanup
function gets called by the test driver due to premature termination of
the main test process, then the function does not get at the PID file
before it has been locked and conclude that the extra copy of the test
has already terminated. This won't usually happen due to a relatively
high amount of time required to elapse before timeout triggers in the
test driver, but it will change with the next change.
There is still a small time window remaining with this change in place
where the main test process gets killed for some reason between the
extra copy of the test has been already started by pthread_create(3) and
a successful return from the call to sem_wait(3), in which case the
cleanup function can be reached before PID has been written to the PID
file and the file locked. It seems that with the test case structured
as it is now and PID-based process management we have no means to avoid
it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a new randomized memset test similar to bench-random-memcpy. Instead of
repeating the same call to memset over and over again, it times a large number
of different inputs. The distribution of memset length and alignment is based
on SPEC2017 (length up to 4096 and alignment up to 64).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Improve performance by handling another 16 bytes before entering the loop.
Use ADDHN in the loop to avoid SHRN+FMOV when it terminates. Change final
size computation to avoid increasing latency. On Neoverse V1 performance
of the random strlen benchmark improves by 4.6%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These functions are exp10m1, exp2m1, log10p1, log2p1.
Also regenerated ulps on x86_64.
For each format, there are 4 values, one for each rounding mode.
(For the intel96 format, there are 8 values, 4 for Intel hardware,
and 4 for AMD hardware. However, regen-ulps was only run on Intel.
It should be run in a separate patch on a AMD x86_64.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is a follow-up to 10de4a47ef that
reworded the manual entries for putc and putwc and removed any
performance claims.
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
As for exit, also allows concurrent quick_exit to avoid race
conditions when it is called concurrently. Since it uses the same
internal function as exit, the __exit_lock lock is moved to
__run_exit_handlers. It also solved a potential concurrent when
calling exit and quick_exit concurrently.
The test case 'expected' is expanded to a value larger than the
minimum required by C/POSIX (32 entries) so at_quick_exit() will
require libc to allocate a new block. This makes the test mre likely to
trigger concurrent issues (through free() at __run_exit_handlers)
if quick_exit() interacts with the at_quick_exit list concurrently.
This is also the latest interpretation of the Austin Ticket [1].
Checked on x86_64-linux-gnu.
[1] https://austingroupbugs.net/view.php?id=1845
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Only return __GCONV_INCOMPLETE_INPUT for a partial match when the end of
the input buffer is reached. Otherwise it is a non-match, and other
patterns should be tried.
5476f8cd2e ("htl: move pthread_self info libc.") and
9dfa256216 ("htl: move pthread_equal into libc") to
1dc0bc8f07 ("htl: move pthread_attr_setdetachstate into libc")
moved some pthread_ symbols from libpthread.so to libc.so, but missed
adding the compat version like 5476f8cd2e ("htl: move pthread_self
info libc.") did: libc already had these symbols as forwards,
but versioned GLIBC_2.21, while the symbols in libpthread.so were
versioned GLIBC_2.12.
To fix running executables built before this, we thus have to add the
GLIBC_2.12 version, otherwise execution fails with e.g.
/usr/lib/i386-gnu/libglib-2.0.so: symbol lookup error: /usr/lib/i386-gnu/libglib-2.0.so: undefined symbol: pthread_attr_setinheritsched, version GLIBC_2.12
Previous GCC versions do not support the C23 change that
allows labels on declarations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add tests for MREMAP_MAYMOVE and MREMAP_FIXED. On Linux, also test
MREMAP_DONTUNMAP.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add string/test-strncmp-nonarray and
wcsmbs/test-wcsncmp-nonarray.
This is the test that uncovered bug 31934. Test run time
is more than one minute on a fairly current system, so turn
these into xtests that do not run automatically.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This helps HotColdSplitting in GCC/LLVM.
Thought about doing `exit` as well since its only called once per
process, but since its easy to imagine a hot path leading into
`exit(0)`, its less clear if its profitable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Even if C/POSIX standard states that exit is not formally thread-unsafe,
calling it more than once is UB. The glibc already supports
it for the single-thread, and both elf/nodelete2.c and tst-rseq-disable.c
call exit from a DSO destructor (which is called by _dl_fini, registered
at program startup with __cxa_atexit).
However, there are still race issues when it is called more than once
concurrently by multiple threads. A recent Rust PR triggered this
issue [1], which resulted in an Austin Group ask for clarification [2].
Besides it, there is a discussion to make concurrent calling not UB [3],
wtih a defined semantic where any remaining callers block until the first
call to exit has finished (reentrant calls, leaving through longjmp, and
exceptions are still undefined).
For glibc, at least reentrant calls are required to be supported to avoid
changing the current behaviour. This requires locking using a recursive
lock, where any exit called by atexit() handlers resumes at the point of
the current handler (thus avoiding calling the current handle multiple
times).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
[1] https://github.com/rust-lang/rust/issues/126600
[2] https://austingroupbugs.net/view.php?id=1845
[3] https://www.openwall.com/lists/libc-coord/2024/07/24/4
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added by commit c62b758bae6af16 as a way for userspace to
check if two file descriptors refer to the same struct file.
Checked on aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
