FreeBSD makes these functions available by default, so we should
not treat them as GNU-specific and restrict them to _GNU_SOURCE.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
FreeBSD makes them available by default, too, so there does not seem
to be a reason to restrict these functions to _GNU_SOURCE.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Rename x86_cpu_INDEX_7_ECX_1 to x86_cpu_INDEX_7_ECX_15 for the unused bit
15 in ECX from CPUID with EAX == 0x7 and ECX == 0.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
sysdeps/mach/hurd/htl/pt-pthread_self.c: New file.
htl/Makefile: .. Add it to libc routine.
sysdeps/mach/hurd/htl/pt-sysdep.c(__pthread_self): Remove it.
sysdeps/mach/hurd/htl/pt-sysdep.h(__pthread_self): Add hidden propertie.
htl/Versions(__pthread_self) Version it as private symbol.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-3-gfleury@disroot.org>
htl/pt-nthreads.c: new file.
htl/Makefile: Add it to routine.
htl/Versions: version it as private libc symbol.
htl/pt-create.c: remove his definition here.
htl/pt-internal.h: add propertie to it declaration.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-2-gfleury@disroot.org>
As indicated by sparc kernel-features.h, even though sparc64 defines
__NR_pause, it is not supported (ENOSYS). Always use ppoll or the
64 bit time_t variant instead.
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 8 (which is sizeof of uint32_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 8;
ex -= 8;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 17.2549 | 12.0318
x86_64 (Ryzen 9) | normal | 85.4096 | 49.9641
x86_64 (Ryzen 9) | close-exponents | 19.1072 | 15.8224
aarch64 (N1) | subnormal | 10.2182 | 6.81778
aarch64 (N1) | normal | 60.0616 | 20.3667
aarch64 (N1) | close-exponents | 11.5256 | 8.39685
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 11.6662 | 10.8955
armhf (N1) | normal | 69.2759 | 34.1524
armhf (N1) | close-exponents | 13.6472 | 18.2131
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 11 (which is sizeo of uint64_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 11;
ex -= 11;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 19.1584 | 12.5049
x86_64 (Ryzen 9) | normal | 1016.51 | 296.939
x86_64 (Ryzen 9) | close-exponents | 18.4428 | 16.0244
aarch64 (N1) | subnormal | 11.153 | 6.81778
aarch64 (N1) | normal | 528.649 | 155.62
aarch64 (N1) | close-exponents | 11.4517 | 8.21306
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, clz, ctz, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 15.908 | 15.1083
armhf (N1) | normal | 837.525 | 244.833
armhf (N1) | close-exponents | 16.2111 | 21.8182
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^8):
1024 inputs between FLT_MIN and FLT_MAX;
3. Close exponents (ey >= -103 and |x/y| < 2^8): 1024 inputs with
exponents between -10 and 10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Add three different dataset, from random floating point numbers:
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^52):
1024 inputs between DBL_MIN and DBL_MAX;
3. Close exponents (ey >= -907 and |x/y| < 2^52): 1024 inputs with
exponents between -10 and 10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The __warn_unused_result__ attribute is only enabled when fortification
is enabled. Mention that in the document. The rationale for this is
essentially to mitigate against CWE-252:
[1] https://cwe.mitre.org/data/definitions/252.html
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
When THREAD_GETMEM is defined with inline assembly, the compiler may not
optimize away the two reads of _hurd_sigstate. Help it out a little bit
by only reading it once. This also makes for a slightly cleaner code.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-32-bugaevc@gmail.com>
Just like the other existing rtld-str* files, this provides rtld with
usable versions of stpncpy and strncpy.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-22-bugaevc@gmail.com>
The source code is the same as sysdeps/i386/htl/tcb-offsets.sym, but of
course the produced tcb-offsets.h will be different.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-21-bugaevc@gmail.com>
These do not need any changes to be used on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-20-bugaevc@gmail.com>
This is more correct, if only because these fields are defined as having
the type unsigned int in the Mach headers, so casting them to a signed
int and then back is suboptimal.
Also, remove an extra reassignment of uesp -- this is another remnant of
the ecx kludge.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-16-bugaevc@gmail.com>
There's nothing Mach- or Hurd-specific about it; any port that ends
up with rtld pulling in strncpy will need this.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-15-bugaevc@gmail.com>
