Previously, after destructors for a DSO have been invoked, ld.so refused
to bind against that DSO in all cases. Relax this restriction somewhat
if the referencing object is itself a DSO that is being unloaded. This
assumes that the symbol reference is not going to be stored anywhere.
The situation in the test case can arise fairly easily with C++ and
objects that are built with different optimization levels and therefore
define different functions with vague linkage.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The LoongArch glibc was using the value of the SHMLBA macro from common code,
which is __getpagesize() (16k), but this was inconsistent with the value of
the SHMLBA macro in the kernel, which is SZ_64K (64k). This caused several
shmat-related tests in LTP (Linux Test Project) to fail. This commit fixes
the issue by ensuring that the glibc's SHMLBA macro value matches the value
used in the kernel like other architectures.
Applying this commit results in bit-identical libc.so.6.
The elf/ld-linux-x86-64.so.2 does change, but only in .note.gnu.build-id
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use a scratch_buffer rather than either alloca or malloc to reduce the
possibility of a stack overflow.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
If `non_temporal_threshold` is below `minimum_non_temporal_threshold`,
it almost certainly means we failed to read the systems cache info.
In this case, rather than defaulting the minimum correct value, we
should default to a value that gets at least reasonable
performance. 64MB is chosen conservatively to be at the very high
end. This should never cause non-temporal stores when, if we had read
cache info, we wouldn't have otherwise.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
All the changes are in comments or '#error' messages.
Applying this commit results in bit-identical rebuild of iconvdata/*.so
Reviewed-by: Florian Weimer <fw@deneb.enyo.de>
Linux 6.3 adds new constants MFD_NOEXEC_SEAL and MFD_EXEC. Add these
to bits/mman-shared.h (conditional on MFD_NOEXEC_SEAL not already
being defined, similar to the existing conditional on the older MFD_*
macros).
Tested for x86_64.
Linux 6.3 adds constants AT_RSEQ_FEATURE_SIZE and AT_RSEQ_ALIGN; add
them to glibc's elf.h. (Recall that, although elf.h is a
system-independent header, so far we've put AT_* constants there even
if Linux-specific, as discussed in bug 15794. So rather than making
any attempt to fix that issue, the new constants are just added there
alongside the existing ones.)
Tested for x86_64.
This patch checks _dl_debug_vdprintf, by passing various inputs to
_dl_dprintf and comparing the output with invocations of snprintf.
Signed-off-by: Roy Eldar <royeldar0@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
_dl_debug_vdprintf is a bare-bones printf implementation; currently
printing a signed integer (using "%d" format specifier) behaves
incorrectly when the number is negative, as it just prints the
corresponding unsigned integer, preceeded by a minus sign.
For example, _dl_printf("%d", -1) would print '-4294967295'.
Signed-off-by: Roy Eldar <royeldar0@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
f55727ca53 updated open_path to use the
r_search_path_struct struct but failed to update the comment.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When dlopen is being called, efforts have been made to improve
future lookup performance. This includes marking a search path
as non-existent using `stat`. However, if the root directory
is given as a search path, there exists a bug which erroneously
marks it as non-existing.
The bug is reproduced under the following sequence:
1. dlopen is called to open a shared library, with at least:
1) a dependency 'A.so' not directly under the '/' directory
(e.g. /lib/A.so), and
2) another dependency 'B.so' resides in '/'.
2. for this bug to reproduce, 'A.so' should be searched *before* 'B.so'.
3. it first tries to find 'A.so' in /, (e.g. /A.so):
- this will (obviously) fail,
- since it's the first time we have seen the '/' directory,
its 'status' is 'unknown'.
4. `buf[buflen - namelen - 1] = '\0'` is executed:
- it intends to remove the leaf and its final slash,
- because of the speciality of '/', its buflen == namelen + 1,
- it erroneously clears the entire buffer.
6. it then calls 'stat' with the empty buffer:
- which will result in an error.
7. so it marks '/' as 'nonexisting', future lookups will not consider
this path.
8. while /B.so *does* exist, failure to look it up in the '/'
directory leads to a 'cannot open shared object file' error.
This patch fixes the bug by preventing 'buflen', an index to put '\0',
from being set to 0, so that the root '/' is always kept.
Relative search paths are always considered as 'existing' so this
wont be affected.
Writeup by Moody Liu <mooodyhunter@outlook.com>
Suggested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Qixing ksyx Xue <qixingxue@outlook.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When the base is 0 or 2 and the first two characters are '0' and 'b',
but the rest are no binary digits. In this case this is no error,
and strtol must return 0 and ENDPTR points to the 'x' or 'b'.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add list end markers.
Sort text using scripts/sort-makefile-lines.py.
No code generation changes observed in non-test binary artifacts.
No regressions on x86_64 and i686.
All fixes are in comments, so the binaries should be identical
before/after this commit, but I can't verify this.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
Applying this commit results in a bit-identical rebuild of
mathvec/libmvec.so.1 (which is the only binary that gets rebuilt).
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
We do not want mach_i386.h to get installed into machine/, but into
i386/ or x86_64/ depending where mach_i386.defs was found, i.e.
according to 32/64 bitness.
Some of the s390-specific configure checks are using compile and
link configure tests. Now use only compile tests as the link
tests fails when e.g. bootstrapping a cross-toolchain due to
missing crt-files/libc.so. This is achieved by using
AC_COMPILE_IFELSE in configure.ac file.
This is observable e.g. when using buildroot which builds glibc
only once or the build-many-glibcs.py script. Note that the latter
one is building glibc twice in the compilers-step (configure-checks
fails) and in the glibcs-step (configure-checks succeed).
Note, that the s390 specific configure tests for static PIE have to
link an executable to test binutils support. Thus we can't fix
those tests.
We need to include hurd.h for libc_hidden_proto (__hurd_thread_self),
introduced in b44c1e1252 ("hurd: Fix using interposable
hurd_thread_self")
This the error log:
In file included from <command-line>:
./../include/libc-symbols.h:472:33: error: '__EI___hurd_thread_self' aliased to undefined symbol '__GI___hurd_thread_self'
472 | extern thread __typeof (name) __EI_##name \
| ^~~~~
./../include/libc-symbols.h:468:3: note: in expansion of macro '__hidden_ver2'
468 | __hidden_ver2 (, local, internal, name)
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:476:41: note: in expansion of macro '__hidden_ver1'
476 | # define hidden_def(name) __hidden_ver1(__GI_##name, name, name);
| ^~~~~~~~~~~~~
./../include/libc-symbols.h:557:32: note: in expansion of macro 'hidden_def'
557 | # define libc_hidden_def(name) hidden_def (name)
| ^~~~~~~~~~
thread-self.c:27:1: note: in expansion of macro 'libc_hidden_def'
27 | libc_hidden_def (__hurd_thread_self)
| ^~~~~~~~~~~~~~~
Message-Id: <ZGr6wj2UOxg3F0qH@jupiter.tail36e24.ts.net>
Fixes 85f7554cd9
"Add test case for O_TMPFILE handling in open, openat"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-3-bugaevc@gmail.com>
The __hurd_fail () inline function is the dedicated, idiomatic way of
reporting errors in the Hurd part of glibc. Not only is it more concise
than '{ errno = err; return -1; }', it is since commit
6639cc1002
"hurd: Mark error functions as __COLD" marked with the cold attribute,
telling the compiler that this codepath is unlikely to be executed.
In one case, use __hurd_dfail () over the plain __hurd_fail ().
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-1-bugaevc@gmail.com>
Create a private hidden __hurd_thread_self alias, and use that one.
Fixes 2f8ecb58a5
"hurd: Fix x86_64 _hurd_tls_fork" and
c7fcce38c8
"hurd: Make sure to not use tcb->self"
Reported-by: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
4d3f846b88 ("hurd: Fix __TIMESIZE on x86_64") incidentaly dropped it
because it fixed hurd 64bit into setting __TIMESIZE to 64, and that case
was not having gai_suspend defined yet.
Fix LOCALE list formatting.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
