This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
GCC 4.4, the minimum compiler version, supports this option. Unlike
other warnings, -Wimplicit-function-declaration warnings should be
independent of compiler versions, so this change should not cause
compiler-specific build failures.
shlib-versions files can contain ABI lines that map triplets to a
canonical ABI name. This name was once used for various purposes
where test baseline files for different ABIs went in a single
directory; now these purposes use sysdeps files, generation of headers
which have per-ABI variants uses abi-variants and related Makefile
variables and the shlib-versions ABI names are unused. This patch
duly removes those lines and associated build system support for them.
Tested for x86_64 (both a full testsuite run and confirming the
installed shared libraries are unchanged by the patch).
* Makeconfig ($(common-objpfx)soversions.mk): Do not generate
abi-name definition.
* scripts/soversions.awk: Do not handle or generate ABI lines.
* shlib-versions: Remove ABI entries.
* sysdeps/powerpc/nofpu/shlib-versions: Remove file.
* sysdeps/x86_64/x32/shlib-versions: Remove ABI entry.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
This patch makes the configure adds -D_CALL_ELF=1 when compiler does
not define _CALL_ELF (versions before powerpc64le support). It cleans
up compiler warnings on old compiler where _CALL_ELF is not defined
on powerpc64(be) builds.
It does by add a new config.make variable for configure-deduced
CPPFLAGS and accumulate into that (confix-extra-cppflags). It also
generalizes libc_extra_cflags so it accumulates in sysdeps configure
fragmenets.
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
This patch changes the logic by which header conformance tests are run
so that the makefiles run the tests for each (standard, header) pair
separately rather than as a single test (there are 518 such pairs
being tested at present).
Since these tests are slow and previously couldn't be run in parallel,
this obviously speeds up the whole test run significantly when using
parallel testing. There are other benefits. These tests can now be
marked as expected to fail at the level of (standard, header) pairs,
meaning that regressions introduced by a header change are much more
likely to be spotted (of course, such a regression could be a bug in
the header or in the expectations, most of which have not been
properly checked against the relevant standards).
The patch introduces lists in conform/Makefile of the headers to test
for each standard, with a new (quick) test for each standard that the
list agrees with the set of headers for which there are in fact
nonempty expectations for that standard. This means that each of the
518 pairs being tested is actually something meaningful to test rather
than a null test. I also hope to use these lists of headers in
various standards in future tests for namespace violations where a
function in a standard is implemented to call a non-reserved name for
a function outside that standard.
Although there are a lot of tests now marked as expected to fail, I
expect most of those to be easy to fix (whether with fixes to the
expectations, the headers or both - if fixing a header bug, of course
file it in Bugzilla first); only a limited number are likely to
reflect actual missing features in glibc.
Tested x86_64 (GCC 4.7 branch). It's quite possible some failures
vary from platform to platform, in which case either additional XFAILs
can be added here, or platform-specific header bugs (if applicable)
the failures show up can be fixed. I made XFAILs unconditional for
tests that should only fail for GCC 4.6 and earlier; we could make the
GCC version available in the makefiles and condition these, but simply
moving the XFAILing to a finer granularity seems a clear improvement
on the previous state of the whole of conformtest being XFAILed.
* Makeconfig (test-xfail-name): New variable.
(evaluate-test): Use $(test-xfail-name) instead of $(@F:.out=) to
compute variable name for expected failures.
* conform/Makefile (conformtest-headers-data): New variable.
(conformtest-standards): Likewise.
(conformtest-headers-ISO): Likewise.
(conformtest-headers-ISO99): Likewise.
(conformtest-headers-ISO11): Likewise.
(conformtest-headers-POSIX): Likewise.
(conformtest-headers-XPG3): Likewise.
(conformtest-headers-XPG4): Likewise.
(conformtest-headers-UNIX98): Likewise.
(conformtest-headers-XOPEN2K): Likewise.
(conformtest-headers-POSIX2008): Likewise.
(conformtest-headers-XOPEN2K8): Likewise.
(conformtest-header-list-base): Likewise.
(conformtest-header-list-tests): Likewise.
(conformtest-header-base): Likewise.
(conformtest-header-tests): Likewise.
(tests-special): Add $(conformtest-header-list-tests). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-tests) instead of
$(objpfx)run-conformtest.out.
(generated): Add $(conformtest-header-list-base). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-base). Remove previous setting.
($(conformtest-header-list-tests)): New target.
(test-xfail-run-conformtest): Remove variable.
($(objpfx)run-conformtest.out): Remove target.
(test-xfail-ISO11/complex.h/conform): New variable.
(test-xfail-ISO11/stdalign.h/conform): Likewise.
(test-xfail-ISO11/stdnoreturn.h/conform): Likewise.
(test-xfail-XPG3/varargs.h/conform): Likewise.
(test-xfail-XPG4/varargs.h/conform): Likewise.
(test-xfail-UNIX98/varargs.h/conform): Likewise.
(test-xfail-XPG4/ndbm.h/conform): Likewise.
(test-xfail-UNIX98/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K8/ndbm.h/conform): Likewise.
(test-xfail-XPG3/fcntl.h/conform): Likewise.
(test-xfail-XPG3/ftw.h/conform): Likewise.
(test-xfail-XPG3/grp.h/conform): Likewise.
(test-xfail-XPG3/langinfo.h/conform): Likewise.
(test-xfail-XPG3/limits.h/conform): Likewise.
(test-xfail-XPG3/pwd.h/conform): Likewise.
(test-xfail-XPG3/search.h/conform): Likewise.
(test-xfail-XPG3/signal.h/conform): Likewise.
(test-xfail-XPG3/stdio.h/conform): Likewise.
(test-xfail-XPG3/stdlib.h/conform): Likewise.
(test-xfail-XPG3/string.h/conform): Likewise.
(test-xfail-XPG3/sys/ipc.h/conform): Likewise.
(test-xfail-XPG3/sys/msg.h/conform): Likewise.
(test-xfail-XPG3/sys/sem.h/conform): Likewise.
(test-xfail-XPG3/sys/shm.h/conform): Likewise.
(test-xfail-XPG3/sys/stat.h/conform): Likewise.
(test-xfail-XPG3/sys/types.h/conform): Likewise.
(test-xfail-XPG3/sys/wait.h/conform): Likewise.
(test-xfail-XPG3/termios.h/conform): Likewise.
(test-xfail-XPG3/time.h/conform): Likewise.
(test-xfail-XPG3/unistd.h/conform): Likewise.
(test-xfail-XPG4/arpa/inet.h/conform): Likewise.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
(test-xfail-XPG4/langinfo.h/conform): Likewise.
(test-xfail-XPG4/netdb.h/conform): Likewise.
(test-xfail-XPG4/netinet/in.h/conform): Likewise.
(test-xfail-XPG4/signal.h/conform): Likewise.
(test-xfail-XPG4/stdio.h/conform): Likewise.
(test-xfail-XPG4/stdlib.h/conform): Likewise.
(test-xfail-XPG4/stropts.h/conform): Likewise.
(test-xfail-XPG4/sys/ipc.h/conform): Likewise.
(test-xfail-XPG4/sys/msg.h/conform): Likewise.
(test-xfail-XPG4/sys/sem.h/conform): Likewise.
(test-xfail-XPG4/sys/shm.h/conform): Likewise.
(test-xfail-XPG4/sys/socket.h/conform): Likewise.
(test-xfail-XPG4/sys/stat.h/conform): Likewise.
(test-xfail-XPG4/sys/time.h/conform): Likewise.
(test-xfail-XPG4/sys/types.h/conform): Likewise.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-XPG4/termios.h/conform): Likewise.
(test-xfail-XPG4/ucontext.h/conform): Likewise.
(test-xfail-XPG4/unistd.h/conform): Likewise.
(test-xfail-XPG4/utmpx.h/conform): Likewise.
(test-xfail-POSIX/sched.h/conform): Likewise.
(test-xfail-POSIX/signal.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/tar.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/fcntl.h/conform): Likewise.
(test-xfail-UNIX98/langinfo.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/sched.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/stdio.h/conform): Likewise.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
(test-xfail-UNIX98/stropts.h/conform): Likewise.
(test-xfail-UNIX98/sys/ipc.h/conform): Likewise.
(test-xfail-UNIX98/sys/msg.h/conform): Likewise.
(test-xfail-UNIX98/sys/sem.h/conform): Likewise.
(test-xfail-UNIX98/sys/shm.h/conform): Likewise.
(test-xfail-UNIX98/sys/socket.h/conform): Likewise.
(test-xfail-UNIX98/sys/time.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/unistd.h/conform): Likewise.
(test-xfail-UNIX98/utmpx.h/conform): Likewise.
(test-xfail-XOPEN2K/aio.h/conform): Likewise.
(test-xfail-XOPEN2K/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K/langinfo.h/conform): Likewise.
(test-xfail-XOPEN2K/math.h/conform): Likewise.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
(test-xfail-XOPEN2K/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K/semaphore.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/stdarg.h/conform): Likewise.
(test-xfail-XOPEN2K/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/termios.h/conform): Likewise.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/utmpx.h/conform): Likewise.
(test-xfail-POSIX2008/arpa/inet.h/conform): Likewise.
(test-xfail-POSIX2008/fcntl.h/conform): Likewise.
(test-xfail-POSIX2008/netdb.h/conform): Likewise.
(test-xfail-POSIX2008/netinet/in.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/stropts.h/conform): Likewise.
(test-xfail-POSIX2008/sys/socket.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K8/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K8/limits.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K8/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/select.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/time.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/termios.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/utmpx.h/conform): Likewise.
(conformtest-cc-flags): Likewise.
($(conformtest-header-tests): New target.
* conform/check-header-lists.sh: New file.
* conform/run-conformtest.sh: Remove.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts
the process of generating explicit PASS or FAIL status for individual
glibc tests. It's based on Tomas Dohnalek's patch
<https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is
deliberately more minimal: it doesn't try to cover any tests outside
of $(tests) / $(xtests) (that's for a later patch), nor does it put
the result together in an overall summary file (again, a later patch):
it just generates the .test-result files.
Thus, this patch keeps the overall logic for when a testsuite run
finishes completely unchanged: a test failing will terminate the run.
I think we *should* move to a more conventional approach where plain
"make check" does not terminate for an individual test failure, unless
e.g. you say "make stop-on-test-failure=y check", but that sort of
policy change is best done as a separate patch once the infrastructure
is in place to generate summary files for completed test runs (which
will entirely consist of PASS and XFAIL lines if the testsuite run
reaches the point of generating them, until such a policy change is
made).
Tested x86_64.
2014-02-14 Tomas Dohnalek <tdohnale@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* Makeconfig (test-name): New variable.
(evaluate-test): Likewise.
* Makerules (do-test-clean): Remove .test-result files.
(common-mostlyclean): Likewise.
* Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules.
* scripts/evaluate-test.sh: New file.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
run-via-rtld-prefix checks whether the program to be run is a static
test and skips if it is. This is fine, except that it assumes that
the program to be run is the second $^, which is true only for tests.
This change creates an rtld-prefix, which is simply the dynamic linker
prefix with the necessary arguments and uses that in the non-test
targets.
