On the Hurd, the errno values don't start at 0, so _sys_errlist_internal
needs index remapping. The _sys_errlist_internal definition already properly
uses ERR_MAP, but __get_errlist and __get_errname were not.
Current GCC mainline produces -Wstringop-overflow errors building some
iconv converters, as discussed at
<https://gcc.gnu.org/pipermail/gcc/2021-July/236943.html>. Add an
__builtin_unreachable call as suggested so that GCC can see the case
that would involve a buffer overflow is unreachable; because the
unreachability depends on valid conversion state being passed into the
function from previous conversion steps, it's not something the
compiler can reasonably deduce on its own.
Tested with build-many-glibcs.py that, together with
<https://sourceware.org/pipermail/libc-alpha/2021-August/130244.html>,
it restores the glibc build for powerpc-linux-gnu.
Avoid triggering a false positive from valgrind by copying the terminating
null in tunables_strdup. At this point the heap is still clean, but
valgrind is stricter here.
Record only the relative address of the caller in mtrace file. Use
LD_TRACE_PRELINKING to get the executable as well as binary vs
executable load offsets so that we may compute a base to add to the
relative address in the mtrace file. This allows us to get a valid
address to pass to addr2line in all cases.
Fixes BZ #22716.
Co-authored-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Optimize loads of all bits set into ZMM register in AVX512 SVML codes
by replacing
vpbroadcastq .L_2il0floatpacket.16(%rip), %zmmX
and
vmovups .L_2il0floatpacket.13(%rip), %zmmX
with
vpternlogd $0xff, %zmmX, %zmmX, %zmmX
This fixes BZ #28252.
The Autoconf documentation for the AC_CACHE_CHECK macro states:
The commands-to-set-it must have no side effects except for setting
the variable cache-id, see below.
However, the tests for support of -msahf and -mmovbe were embedded in
the commands-to-set-it for lib_cv_include_x86_isa_level. This had the
consequence that libc_cv_have_x86_lahf_sahf and libc_cv_have_x86_movbe
were not defined whenever lib_cv_include_x86_isa_level was read from
cache. These variables' being undefined meant that their unquoted use
in later test expressions led to the 'test' built-in's misparsing its
arguments and emitting errors like "test: =: unexpected operator" or
"test: =: unary operator expected", depending on the particular shell.
This commit refactors the tests for LAHF/SAHF and MOVBE instruction
support into their own AC_CACHE_CHECK macro invocations to obey the
rule that the commands-to-set-it must have no side effects other than
setting the variable named by cache-id.
Signed-off-by: Matt Whitlock <sourceware@mattwhitlock.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269
(x86-64) and 43d06ed218 (aarch64).
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
&__ehdr_start is a better way to get the load address.
This is similar to commits b37b75d269
(x86-64) and 43d06ed218 (aarch64).
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
and drop reliance on _GLOBAL_OFFSET_TABLE_[0] being the link-time
address of _DYNAMIC. &__ehdr_start is a better way to get the load address.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
elf/tls-macros.h was added for TLS testing when GCC did not support
__thread. __thread and tls_model attributes are mature now and have been
used by many newer tests.
Also delete tst-tls2.c which tests .tls_common (unused by modern GCC and
unsupported by Clang/LLD). .tls_common and .tbss definition are almost
identical after linking, so the runtime test doesn't add additional
coverage. Assembler and linker tests should be on the binutils side.
When LLD 13.0.0 is allowed in configure.ac
(https://sourceware.org/pipermail/libc-alpha/2021-August/129866.html),
`make check` result is on par with glibc built with GNU ld on aarch64
and x86_64.
As a future clean-up, TLS_GD/TLS_LD/TLS_IE/TLS_IE macros can be removed from
sysdeps/*/tls-macros.h. We can add optional -mtls-dialect={gnu2,trad}
tests to ensure coverage.
Tested on aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Gnumach's 0650a4ee30e3 implements support for high bits being set in the
mask parameter of vm_map. This allows to remove the fmh kludge that was
masking away the address range by mapping a dumb area there.
On the port of OpenRISC I am working on and it appears the rv32 port
we have sets __TIMESIZE == 64 && __WORDSIZE == 32. This causes the
size of time_t to be 8 bytes, but the tv_sec in the kernel is still 32-bit
causing truncation.
The truncations are unavoidable on these systems so skip the
testing/failures by guarding with __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64.
Also, futher in the tests and in other parts of code checking for time_t
overflow does not work on 32-bit systems when time_t is 64-bit. As
suggested by Adhemerval, update the in_time_t_range function to assume
32-bits by using int32_t.
This also brings in the header for stdint.h so we can update other
usages of __int32_t to int32_t as suggested by Adhemerval.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In "mips: align stack in clone [BZ #28223]"
(commit 1f51cd9a86) I made a mistake: I
misbelieved one "word" was 2-byte and "doubleword" should be 4-byte.
But in MIPS ABI one "word" is defined 32-bit (4-byte), so "doubleword" is
8-byte [1], and "quadword" is 16-byte [2].
[1]: "System V Application Binary Interface: MIPS(R) RISC Processor
Supplement, 3rd edition", page 3-31
[2]: "MIPSpro(TM) 64-Bit Porting and Transition Guide", page 23
The MIPS O32 ABI requires 4 byte aligned stack, and the MIPS N64 and N32
ABI require 8 byte aligned stack. Previously if the caller passed an
unaligned stack to clone the the child misbehaved.
Fixes bug 28223.
This test implements following logic:
1) Create POSIX message queue.
Register a notification with mq_notify (using NULL attributes).
Then immediately unregister the notification with mq_notify.
Helper thread in a vulnerable version of glibc
should cause NULL pointer dereference after these steps.
2) Once again, register the same notification.
Try to send a dummy message.
Test is considered successfulif the dummy message
is successfully received by the callback function.
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When the memory object is read-only, the kernel would be right in
refusing max vmprot containing VM_PROT_WRITE.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The AArch64 ABI is largely platform agnostic and does not specify
_GLOBAL_OFFSET_TABLE_[0] ([1]). glibc ld.so turns out to be probably the
only user of _GLOBAL_OFFSET_TABLE_[0] and GNU ld defines the value
to the link-time address _DYNAMIC. [2]
In 2012, __ehdr_start was implemented in GNU ld and gold in binutils
2.23. Using adrp+add / (-mcmodel=tiny) adr to access
__ehdr_start/_DYNAMIC gives us a robust way to get the load address and
the link-time address of _DYNAMIC.
[1]: From a psABI maintainer, https://bugs.llvm.org/show_bug.cgi?id=49672#c2
[2]: LLD's aarch64 port does not set _GLOBAL_OFFSET_TABLE_[0] to the
link-time address _DYNAMIC.
LLD is widely used on aarch64 Android and ChromeOS devices. Software
just works without the need for _GLOBAL_OFFSET_TABLE_[0].
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
We can consider __ehdr_start (from binutils 2.23 onwards)
unconditionally supported, since configure.ac requires binutils>=2.25.
The configure.ac check is related to an ia64 bug fixed by binutils 2.24.
See https://sourceware.org/pipermail/libc-alpha/2014-August/053503.html
Tested on x86_64-linux-gnu. Tested build-many-glibcs.py with
aarch64-linux-gnu and s390x-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Simplify handling of remaining bytes. Avoid lots of taken branches and complex
whilelo computations, instead unconditionally write vectors from the end.
Reviewed-by: Naohiro Tamura <naohirot@fujitsu.com>
Improve performance of large memsets. Simplify alignment code. For zero memset
use DC ZVA, which almost doubles performance. For non-zero memsets use the
unroll8 loop which is about 10% faster.
Reviewed-by: Naohiro Tamura <naohirot@fujitsu.com>
Improve performance of small memsets by reducing instruction counts and
improving code alignment. Bench-memset shows 35-45% performance gain for
small sizes.
Reviewed-by: Naohiro Tamura <naohirot@fujitsu.com>
Linux 5.13 adds a PTRACE_GET_RSEQ_CONFIGURATION constant, with an
associated ptrace_rseq_configuration structure.
Add this constant to the various sys/ptrace.h headers in glibc, with
the structure in bits/ptrace-shared.h (named struct
__ptrace_rseq_configuration in glibc, as with other such structures).
Tested for x86_64, and with build-many-glibcs.py.
Helper thread frees copied attribute on NOTIFY_REMOVED message
received from the OS kernel. Unfortunately, it fails to check whether
copied attribute actually exists (data.attr != NULL). This worked
earlier because free() checks passed pointer before actually
attempting to release corresponding memory. But
__pthread_attr_destroy assumes pointer is not NULL.
So passing NULL pointer to __pthread_attr_destroy will result in
segmentation fault. This scenario is possible if
notification->sigev_notify_attributes == NULL (which means default
thread attributes should be used).
Signed-off-by: Nikita Popov <npv1310@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We'd like to support processors without Altivec or VSX, so check
the relevant hwcap bits before selecting them.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
A number of optimised memset routines assume the cacheline size is 128B,
so we better check before using them.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
We use PPC_FEATURE_HAS_VSX to select a number of POWER7 optimised
functions. These functions don't use any VSX instructions, so
PPC_FEATURE_ARCH_2_06 seems like a better fit.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
Fixes commit 8a40aff86b ("io: Add time64 alias
for fcntl"), commit 82c395d91e ("misc: Add
time64 alias for ioctl"), commit b39ffab860
("Linux: Add time64 alias for prctl").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.13 adds an INADDR_DUMMY definition; add a corresponding
definition to glibc's netinet/in.h. (This isn't strictly a new kernel
interface, rather a value defined in RFC 7600.)
Tested for x86_64.
It turned that the generic implementation of brk() does not work
for sparc, since on failure kernel will just return the previous
input value without setting the conditional register.
This patches adds back a sparc32 and sparc64 implementation removed
by 720480934a.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
This test depends on the "last" function being called in a
different thread than the "first" function, as "last" posts
a semaphore that "first" is waiting on. However, if pthread_create
fails - for example, if running in an older container before
the clone3()-in-container-EPERM fixes - exit() is called in the
same thread as everything else, the semaphore never gets posted,
and first hangs.
The fix is to pre-post that semaphore before a single-threaded
exit.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
labellist and precedencelist could get freed a second time if there
are allocation failures, so set them to NULL to avoid a double-free.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
If close() on infd and outfd succeeded, reset the fd numbers so that
we don't attempt to close them again.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The allocated `conf` would leak if we have to skip over the file due
to the underlying filesystem not supporting dt_type.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
