This patch lays out the top-level orginazition of the RISC-V port. It
contains all the Implies files as well as various other fragments of
build infastructure for the RISC-V port. This contains the only change
to a shared file: config.h.in.
RISC-V is a family of base ISAs with optional extensions. The base ISAs
are RV32I and RV64I, which are 32-bit and 64-bit integer-only ISAs, but
this port currently only supports RV64I based systems. Support for
RISC-V lives in in sysdeps/riscv. In addition to these ISAs, our glibc
port supports most of the currently-defined extensions: the A extension
for atomics, the M extension for multiplication, the C extension for
compressed instructions, and the F/D extensions for single/double
precision IEEE floating-point. Most of these extensions are handled by
GCC, but glibc defines various floating-point wrappers and emulation
routines as well as some atomic wrappers.
We support running glibc-based programs on Linux, the support for which
lives in sysdeps/unix/sysv/linux/riscv.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/Implies: New file.
* sysdeps/riscv/Makefile: Likewise.
* sysdeps/riscv/configure: Likewise.
* sysdeps/riscv/configure.ac: Likewise.
* sysdeps/riscv/nptl/Makefile: Likewise.
* sysdeps/riscv/preconfigure: Likewise.
* sysdeps/riscv/rv64/Implies-after: Likewise.
* sysdeps/riscv/rv64/rvd/Implies: Likewise.
* sysdeps/riscv/rv64/rvf/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/Versions: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/riscv/ldd-rewrite.sed: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/shlib-versions: Likewise.
I started with the aarch64 ABI lists and manually went through each
difference, ensuring that the missing entries had been deprecated along
the line. Darius generated the ulps files by running the test cases on QEMU.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nofpu/libm-test-ulps: New file.
* sysdeps/riscv/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps-name: Likewise.
* sysdeps/unix/sysv/linux/riscv/localplt.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/c++-types.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libanl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libdl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libnsl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/librt.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libutil.abilist: Likewise.
This contains the Linux-specific code for loading programs on RISC-V.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/unix/sysv/linux/riscv/dl-static.c: New file.
* sysdeps/unix/sysv/linux/riscv/ldconfig.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/ldsodefs.h: Likewise.
Contains the Linux system call interface, as well as the definitions of
a handful of system calls.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/nptl-sysdep.S: New file.
* sysdeps/unix/sysv/linux/riscv/arch-fork.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/clone.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/pt-vfork.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/syscall.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Likewise.
This patch implements various atomic and locking routines on RISC-V. We
mandate the A extension on Linux-capable RISC-V systems, so this can
rely on always having the various atomic instructions availiable.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h: New file.
* sysdeps/riscv/nptl/bits/semaphore.h: Likewise.
* sysdeps/riscv/nptl/libc-lowlevellock.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/atomic-machine.h: Likewise.
This patch contains the miscellaneous math routines and headers we have
implemented for RISC-V. This includes things from <math.h> that aren't
completely ISA-generic, floating-point bit manipulation, and soft-fp
hooks.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/bits/fenv.h: New file.
* sysdeps/riscv/e_sqrtl.c: Likewise.
* sysdeps/riscv/fpu_control.h: Likewise.
* sysdeps/riscv/math-tests.h: Likewise.
* sysdeps/riscv/nofpu/Implies: Likewise.
* sysdeps/riscv/sfp-machine.h: Likewise.
* sysdeps/riscv/tininess.h: Likewise.
This patch implements TLS support for RISC-V. We support all four
standard TLS addressing modes (LE, IE, LD, and GD) when running on
Linux via NPTL. There is a draft psABI document that defines our TLS
ABI here
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#thread-local-storage
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/dl-tls.h: New file.
* sysdeps/riscv/libc-tls.c: Likewise.
* sysdeps/riscv/nptl/tcb-offsets.sym: Likewise.
* sysdeps/riscv/nptl/tls.h: Likewise.
* sysdeps/riscv/stackinfo.h: Likewise.
This patch contains code that needs to directly know about the RISC-V
ABI, which is specified in a work-in-progress psABI document:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
This is meant to contain all the RISC-V code that needs to explicitly
name registers or manage in-memory structure layout. This does not
contain any of the Linux-specific code.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/__longjmp.S: New file.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/riscv/bits/endian.h: Likewise.
* sysdeps/riscv/bits/setjmp.h: Likewise.
* sysdeps/riscv/bits/wordsize.h: Likewise.
* sysdeps/riscv/bsd-_setjmp.c: Likewise.
* sysdeps/riscv/bsd-setjmp.c: Likewise.
* sysdeps/riscv/dl-trampoline.S: Likewise.
* sysdeps/riscv/gccframe.h: Likewise.
* sysdeps/riscv/jmpbuf-offsets.h: Likewise.
* sysdeps/riscv/jmpbuf-unwind.h: Likewise.
* sysdeps/riscv/machine-gmon.h: Likewise.
* sysdeps/riscv/memusage.h: Likewise.
* sysdeps/riscv/setjmp.S: Likewise.
* sysdeps/riscv/sys/asm.h: Likewise.
* sysdeps/riscv/tls-macros.h: Likewise.
This function is used by GCC to enforce ordering between data writes and
instruction fetches, and while we'd prefer that users rely on the GCC
intrinsic when possible this is user visible in case that's not
possible.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/platform.texi: Add RISC-V documenation for
__riscv_flush_icache.
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
The RISC-V port contains a crti.S that simply contains a link to
PREINIT_FUNCTION (when defined). As this should be entirely generic,
Joseph Myers suggested that we update the generic init_array version to
contain this. Since RISC-V is the only user of init_array this won't
break any existing ports.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/init_array/crti.S (.section .init_array): Add
PREINIT_FUNCTION when defined.
copy_file_range syscall was added for microblaze in 4.10.
This patch makes the MicroBlaze kernel-features.h undefine
__ASSUME_COPY_FILE_RANGE for toolchains built with kernel headers < 4.10.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_COPY_FILE_RANGE) [__LINUX_KERNEL_VERSION < 0x040A00]: Undef.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=7181e5590e5ba898804aef3ee6be7f27606e6f8b
Signed-off-by: Romain Naour <romain.naour@gmail.com>
With the git checkouts of Hurd components in build-many-glibcs.py
involving running autoreconf, there's a risk that generated files
could be left behind by an old autoreconf run (if an old version of
the sources generates those files in the source directory but a new
version does not).
This patch avoids that by using git clean -dxfq when updating git
checkouts. In this patch, that's conditional on --replace-sources, to
avoid removing any local not-checked-in files someone may have in
their checkout unless the option has been specifically passed that
says it's OK to blow old checkouts away, complete with any local
changes to them.
* scripts/build-many-glibcs.py (Context.git_checkout): Use git
clean -dxfq for git updates when replacing sources.
The disabling of libcilkrts in build-many-glibcs.py has some
peculiarities. It's only for the final GCC build, not the initial
bootstrap one, whereas normally anything disabled for the final build
should be disabled for the bootstrap one as well. And it's only for
Hurd, when it's more natural by analogy with the libsanitizer
disabling to disable this library unconditionally, not only for
targets where it's known to break. This patch cleans up that
disabling accordingly, adding a comment so it's obvious it can be
removed once GCC 7 is too old to build glibc.
* scripts/build-many-glibcs.py (Config.build_gcc): Use
--disable-libcilkrts unconditionally, not just for the final GCC
build for Hurd.
This patch makes build-many-glibcs.py use Linux 4.15. Other glibc
updates for Linux 4.15 can wait until after the 2.27 release.
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 4.15.
[BZ #10871]
* localedata/locales/ru_RU (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Import from CLDR (genitive case).
(abmon): Copy from the old content except the 5th month which is
now in the genitive case, even when abbreviated.
* localedata/locales/ru_UA: Likewise.
* time/tst-strptime.c (day_tests): Add an actual example of
a difference between %b and %Ob in Russian.
* sysdeps/mach/hurd/net/ethernet.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_arp.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_ppp.h: Do not include non-existing
<net/ppp_defs.h>.
_POSIX_CHOWN_RESTRICTED and _POSIX_NO_TRUNC should be always defined.
* sysdeps/mach/hurd/bits/posix_opt.h (_POSIX_CHOWN_RESTRICTED,
_POSIX_NO_TRUNC): Define to 0.
400669754d ('hurd: Fix nscd build') had the side effect of making
libc's freeaddrinfo expose freeifaddrs through __check_pf. We can just
move the renames to gai.c itself, along others.
* sysdeps/mach/hurd/check_pf.c (__getifaddrs, __freeifaddrs): Do not
define macros.
* nscd/gai.c (__getifaddrs): Define macro to getifaddrs.
(__freeifaddrs): Define macro to freeifaddrs.
* hurd/hurd.h (__hurd_fail): Always declare function, and provide inline
version only if __USE_EXTERN_INLINES is defined.
* hurd/hurd/fd.h (_hurd_fd_error_signal, _hurd_fd_error, __hurd_dfail,
__hurd_sockfail): Likewise.
(_hurd_fd_get): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and IS_IN(libc).
* hurd/hurd/port.h (_hurd_port_init, _hurd_port_locked_get,
_hurd_port_get, _hurd_port_free, _hurd_port_locked_set,
_hurd_port_set): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and
IS_IN(libc).
* hurd/hurd/signal.h (_hurd_self_sigstate, _hurd_critical_section_lock,
_hurd_critical_section_unlock): Likewise.
* hurd/hurd/threadvar.h (__hurd_threadvar_location_from_sp,
* __hurd_threadvar_location): Likewise.
* hurd/hurd/userlink.h (_hurd_userlink_link, _hurd_userlink_unlink,
_hurd_userlink_clear): Likewise.
* mach/lock-intern.h (__spin_lock_init, __spin_lock, __mutex_lock,
__mutex_unlock, __mutex_trylock): Always declare functions, and provide
inline versions only if __USE_EXTERN_INLINES and _LIBC are defined.
* mach/mach/mig_support.h (__mig_strncpy): Likewise.
* sysdeps/generic/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* sysdeps/mach/i386/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* mach/spin-lock.c (__USE_EXTERN_INLINES): Define to 1.
* hurd/Versions (libc: GLIBC_2.27): Add _hurd_fd_error_signal,
_hurd_fd_error, __hurd_dfail, __hurd_sockfail, _hurd_port_locked_set,
__hurd_threadvar_location_from_sp, __hurd_threadvar_location,
_hurd_userlink_link, _hurd_userlink_unlink, _hurd_userlink_clear.
Some warnings need a couple of fixes in the gnumach headers.
* scripts/build-many-glibcs.py (checkout_vcs): Add gnumach
repository URLs, run autoreconf, and make it the default for now.
* sysdeps/mach/hurd/getresgid.c (__getresgid): Set result from
critical section to make code simpler and avoid warning.
* sysdeps/mach/hurd/getresuid.c (__getresuid): Set result from
critical section to make code simpler and avoid warning.
Making `special_profil_failure' both avoids warning "variable
'special_profil_failure' set but not used", and makes it easier to
access with gdb.
* sysdeps/mach/hurd/profil.c (special_profil_failure): Move variable
to global scope.
Some warnings come from code generated by mig, so we need a very recent
version for now.
* scripts/build-many-glibcs.py (checkout_vcs): Add mig repository
URL, and run autoreconf, make it the default for now.
This was dropped from GNU Mach in 2006.
* mach/Machrules (MIGFLAGS): Do not set -DMACH_IPC_COMPAT=0.
* mach/mach/mach_traps.h: Drop comment about MACH_IPC_COMPAT.
* sysdeps/mach/hurd/fork.c (__fork): Drop special casing
MACH_IPC_COMPAT.
gcc's libcilkrts has never actually supported GNU/Hurd, and doesn't
automatically disable it, and the support was actually removed in gcc trunk,
so that will never actually be fixed there.
* scripts/build-many-glibcs.py [os == gnu] (build_gcc): Pass
--disable-libcilkrts to gcc configure.
timer_ptr2id and timer_id2ptr are used to convert between
application-visible timer_t and struct timer_node *. timer_ptr2id was made
to use void * instead of timer_t in 49b650430e ('Update.') for no reason.
It happens that on Linux timer_t is void *, so both that change and this
commit are no-ops there, but not on systems where timer_t is not void *.
Using timer_ptr2id for filling sival_ptr also does not make sense since that
actually is a void *.
* sysdeps/pthread/posix-timer.h (timer_ptr2id): Cast to timer_t
instead of void *.
* sysdeps/pthread/timer_create.c (timer_create): Do not use
timer_ptr2id to cast struct timer_node * to void *.
In commit cba595c350 and commit
f81ddabffd, ABI compatibility with
applications was broken by increasing the size of the on-stack
allocated __pthread_unwind_buf_t beyond the oringal size.
Applications only have the origianl space available for
__pthread_unwind_register, and __pthread_unwind_next to use,
any increase in the size of __pthread_unwind_buf_t causes these
functions to write beyond the original structure into other
on-stack variables leading to segmentation faults in common
applications like vlc. The only workaround is to version those
functions which operate on the old sized objects, but this must
happen in glibc 2.28.
Thank you to Andrew Senkevich, H.J. Lu, and Aurelien Jarno, for
submitting reports and tracking the issue down.
The commit reverts the above mentioned commits and testing on
x86_64 shows that the ABI compatibility is restored. A tst-cleanup1
regression test linked with an older glibc now passes when run
with the newly built glibc. Previously a tst-cleanup1 linked with
an older glibc would segfault when run with an affected glibc build.
Tested on x86_64 with no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The RISC-V port defines ELF flags that enforce compatibility between
various objects. This adds the shared support necessary for these
flags.
2018-01-25 Palmer Dabbelt <palmer@sifive.com>
* elf/cache.c (print_entry): Add FLAG_RISCV_FLOAT_ABI_SOFT and
FLAG_RISCV_FLOAT_ABI_DOUBLE.
* elf/elf.h (EF_RISCV_RVC): New define.
(EF_RISCV_FLOAT_ABI): Likewise.
(EF_RISCV_FLOAT_ABI_SOFT): Likewise.
(EF_RISCV_FLOAT_ABI_SINGLE): Likewise.
(EF_RISCV_FLOAT_ABI_DOUBLE): Likewise.
(EF_RISCV_FLOAT_ABI_QUAD): Likewise.
* sysdeps/generic/ldconfig.h (FLAG_RISCV_FLOAT_ABI_SOFT): New
define.
(FLAG_RISCV_FLOAT_ABI_DOUBLE): Likewise.
The arguments of the LIBC_SLIBDIR_RTLDDIR macro are used both in unquoted
and single quoted context, so that neither shell nor makefile variable
references work. Consistently put them in single quotes so that they can
refer to makefile variables.
Since it turns out soft-float ColdFire has a different glibc ABI to
hard-float ColdFire, as well as various differences in which glibc
code gets built, this patch adds such a configuration to
build-many-glibcs.py to (hopefully) complete the set of ABIs being
tested. (Note that the build for soft-float ColdFire is currently
broken even with GCC mainline - I have a glibc patch to fix this, but
it needs before-and-after build-many-glibcs.py comparison of stripped
binaries for all configurations before being committed.)
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
soft-float ColdFire configuration.
The sole failure for ColdFire in the compilation part of the glibc
testsuite is the localplt test. This patch adds a localplt baseline
for ColdFire to eliminate that failure. The difference from the
existing m68k baseline is that no PLT entry for _Unwind_Find_FDE is
expected, because ColdFire does not set
libc_cv_gcc_unwind_find_fde=yes.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/m68k/localplt.data: Move to ....
* sysdeps/unix/sysv/linux/m68k/m680x0/localplt.data: ... here.
* sysdeps/unix/sysv/linux/m68k/coldfire/localplt.data: New file.
As with some other soft-float configurations, no-FPU ColdFire needs
various fenv.h functions and glibc-internal macros overridden in
math_private.h to avoid references to undefined FE_* macros when
building glibc. This patch adds a suitable math_private.h, based on
the MicroBlaze one (Nios II and Tile also have similar files).
There's a case for having such a file in sysdeps/ieee754/soft-fp so
this logic is applied more generally to configurations without
exceptions and rounding modes, even when the relevant macros are
defined in fenv.h - the only case where that might be inappropriate is
ARM soft-float (where the fenv.h functions might or might not work at
runtime, depending on whether the processor used at runtime supports
VFP). There's also a case that soft-float configurations (on
processors with both hard-float and soft-float) should more
consistently avoid defining FE_* macros in bits/fenv.h when not
actually supported. But both of those are separate potential
cleanups.
This allows the no-FPU ColdFire build to get further (another fix is
needed to allow the build to complete).
* sysdeps/m68k/coldfire/nofpu/math_private.h: New file. Based on
MicroBlaze file.
Continuing the fixes for ColdFire glibc build with
build-many-glibcs.py, given a GCC patch for the libgcc build failure,
this patch adds jmp_buf-macros.h for no-FPU ColdFire. This allows the
no-FPU build to progress further than without the patch (although
other fixes are still needed for the build to complete).
* sysdeps/unix/sysv/linux/m68k/coldfire/jmp_buf-macros.h: Move to
....
* sysdeps/unix/sysv/linux/m68k/coldfire/fpu/jmp_buf-macros.h:
... here.
* sysdeps/unix/sysv/linux/m68k/coldfire/nofpu/jmp_buf-macros.h:
New file.
This patch adds a jmp_buf-macros.h for ColdFire. In conjunction with
a GCC patch to fix the libgcc build failure for ColdFire
<https://gcc.gnu.org/ml/gcc-patches/2018-01/msg02064.html> this
suffices to restore the build (tested with build-many-glibcs.py). A
further patch will be needed for soft-float ColdFire (while the
function-calling ABI is the same for hard-float and soft-float
ColdFire, it turns out the glibc ABI is not - so another ColdFire
variant will be needed in build-many-glibcs.py), but I'll deal with
that separately.
Tested with build-many-glibcs.py (m68k-linux-gnu and
m68k-linux-gnu-coldfire). (There's a localplt test failure for
coldfire; that's the only failure in the compilation part of the
testsuite.)
* sysdeps/unix/sysv/linux/m68k/jmp_buf-macros.h: Move to ....
* sysdeps/unix/sysv/linux/m68k/m680x0/jmp_buf-macros.h: ... here.
* sysdeps/unix/sysv/linux/m68k/coldfire/jmp_buf-macros.h: New
file.
The uc_mcontext.__reserved member of ucontext_t is a user visible API,
that should not be changed, because this is the only way to access cpu
states of various extensions of linux asm/sigcontext.h, it does not
violate namespace rules either, so revert this part of the commit
commit 4fa9b3bfe6
Commit: Joseph Myers <joseph@codesourcery.com>
Fix mcontext_t sigcontext namespace (bug 21457).
(In principle the user can type cast &uc_mcontext to struct sigcontext*
to use the linux sigcontext fields, but that's not the existing practice
since mcontext_t used to be a typedef of struct sigcontext.)
[BZ #22742]
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (__glibc_reserved1):
Rename to __reserved and add comment.
* sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (__glibc_reserved1):
Rename to __reserved.
This patch adds build-many-glibcs.py support for GNU Hurd. Builds of
the i686-gnu configuration will fail until sufficient support is
merged to master, so completing build-many-glibcs.py coverage of all
glibc ABIs and making results accurately reflect the broken state of
builds for Hurd.
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
i686-gnu configurations.
(Context.run_builds): Include mig, gnumach and hurd in components
considered.
(Context.checkout): Add mig, gnumach and hurd to components.
(Context.checkout_tar): Add URL mappings for mig, gnumach and
hurd.
(Context.bot_cycle): Check for changes to mig, gnumach and hurd.
(Config.build): Install gnumach headers, build mig and install
hurd headers for 'gnu' OS.
(Config.install_gnumach_headers): New function.
(Config.install_hurd_headers): Likewise.
(Glibc.build_glibc): Do not use /usr for 'gnu' OS. Specifiy MIG
when building for 'gnu' OS.
"%OB" is considered a conversion specifier ("B" is the format
specifier), and the list of format specifiers for months in the
description of the optional "O" modifier was incomplete. A
cross-reference from the ALTMON_* constants to the strftime section
is also provided. Lastly, some grammatical fixes (commas) are made
and paragraphs refactored (rewrapped).
* manual/locale.texi (ALTMON_1, ALTMON_2, ALTMON_3, ALTMON_4,
ALTMON_5, ALTMON_6, ALTMON_7, ALTMON_8, ALTMON_9, ALTMON_10,
ALTMON_11, ALTMON_12): Improve documentation.
* manual/time.texi (strftime): Likewise.
[BZ #10871]
* manual/locale.texi: Document ALTMON_1..12 constants for
nl_langinfo. Specify when to use ALTMON instead of MON.
* manual/time.texi (strftime, strptime): Document GNU extension
permitting O modifier with %B and %b. Specify when to use
%OB instead of %B.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All the previous changes also repeated to support abbreviated
alternative month names. In most languages which have declension and
need nominative/genitive month names the abbreviated forms for both
cases are the same. An example where they do differ is May in Russian:
this name is too short to be abbreviated so even the abbreviated form
features the declension suffixes.
[BZ #10871]
* locale/C-time.c (_nl_C_LC_TIME): Add abbreviated alternative month
names, define them as the same as abbreviated month names explicitly.
* locale/categories.def (LC_TIME): Add ab_alt_mon and wide-ab_alt_mon.
* locale/langinfo.h: (_NL_ABALTMON_1, _NL_ABALTMON_2, _NL_ABALTMON_3,
_NL_ABALTMON_4, _NL_ABALTMON_5, _NL_ABALTMON_6, _NL_ABALTMON_7,
_NL_ABALTMON_8, _NL_ABALTMON_9, _NL_ABALTMON_10, _NL_ABALTMON_11,
_NL_ABALTMON_12, _NL_WABALTMON_1, _NL_WABALTMON_2, _NL_WABALTMON_3,
_NL_WABALTMON_4, _NL_WABALTMON_5, _NL_WABALTMON_6, _NL_WABALTMON_7,
_NL_WABALTMON_8, _NL_WABALTMON_9, _NL_WABALTMON_10, _NL_WABALTMON_11,
_NL_WABALTMON_12): New enum constants.
* locale/programs/ld-time.c (struct locale_time_t): Add ab_alt_mon,
wab_alt_mon, and ab_alt_mon_defined members.
(time_output): Output ab_alt_mon and wab_alt_mon members.
(time_read): Read them, initialize them as copies of abmon and wabmon
respectively if they are missing, initialize ab_alt_mon_defined.
* locale/programs/locfile-kw.gperf (ab_alt_mon): Define.
* locale/programs/locfile-kw.h: Regenerate.
* locale/programs/locfile-token.h (tok_ab_alt_mon): New enum constant.
* time/Makefile [$(run-built-tests) = yes] (LOCALES): Add es_ES.UTF-8
and ru_RU.UTF-8.
* time/strftime_l.c (a_altmonth, aam_len): New macros.
[!COMPILE_WIDE] (ABALTMON_1): New macro.
(__strftime_internal): Handle %Ob and %Oh formats.
* time/strptime_l.c [_LIBC] (ab_alt_month_name): New macro.
(__strptime_internal): Handle %Ob and %Oh formats.
* time/tst-strptime.c (day_tests): Add more tests to parse different
forms of month names including the new %Ob format specifier.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some languages (Slavic, Baltic, etc.) require a genitive case of the
month name when formatting a full date (with the day number) while
they require a nominative case when referring to the month standalone.
This requirement cannot be fulfilled without providing two forms for
each month name. From now it is specified that nl_langinfo(MON_1)
series (up to MON_12) and strftime("%B") generate the month names in
the grammatical form used when the month is a part of a complete date.
If the grammatical form used when the month is named by itself is needed,
the new values nl_langinfo(ALTMON_1) (up to ALTMON_12) and
strftime("%OB") are supported. This new feature is optional so the
languages which do not need it or do not yet provide the updated
locales simply do not use it and their behaviour is unchanged.
[BZ #10871]
* locale/C-time.c (_nl_C_LC_TIME): Add alternative month names,
define them as the same as primary full month names explicitly.
* locale/categories.def (LC_TIME): Add alt_mon and wide-alt_mon.
* locale/langinfo.h (__ALTMON_1, __ALTMON_2, __ALTMON_3, __ALTMON_4,
__ALTMON_5, __ALTMON_6, __ALTMON_7, __ALTMON_8, __ALTMON_9, __ALTMON_10,
__ALTMON_11, __ALTMON_12, _NL_WALTMON_1, _NL_WALTMON_2, _NL_WALTMON_3,
_NL_WALTMON_4, _NL_WALTMON_5, _NL_WALTMON_6, _NL_WALTMON_7,
_NL_WALTMON_8, _NL_WALTMON_9, _NL_WALTMON_10, _NL_WALTMON_11,
_NL_WALTMON_12): New enum constants.
[__USE_GNU] (ALTMON_1, ALTMON_2, ALTMON_3, ALTMON_4, ALTMON_5, ALTMON_6,
ALTMON_7, ALTMON_8, ALTMON_9, ALTMON_10, ALTMON_11, ALTMON_12): New
macros.
* locale/programs/ld-time.c (struct locale_time_t): Add alt_mon,
walt_mon, and alt_mon_defined members.
(time_output): Output alt_mon and walt_mon members.
(time_read): Read them, initialize them as copies of mon and wmon
respectively if they are missing, initialize alt_mon_defined.
* locale/programs/locfile-kw.gperf (alt_mon): Define.
* locale/programs/locfile-kw.h: Regenerate.
* locale/programs/locfile-token.h (tok_alt_mon): New enum constant.
* localedata/tst-langinfo.c (map): Add tests for the new constants
ALTMON_1 .. ALTMON_12.
* time/Makefile [$(run-built-tests) = yes] (LOCALES): Add fr_FR.UTF-8
and pl_PL.UTF-8.
* time/strftime_l.c (f_altmonth): New macro.
(__strftime_internal): Handle %OB format.
* time/strptime_l.c [_LIBC] (alt_month_name): New macro.
(__strptime_internal): Handle %OB format.
* time/tst-strptime.c (day_tests): Add tests to parse different forms
of month names including the new %OB format specifier.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The tunables framework needs to execute syscall early in process
initialization, before the TCB is available for consumption. This
behavior conflicts with powerpc{|64|64le}'s lock elision code, that
checks the TCB before trying to abort transactions immediately before
executing a syscall.
This patch adds a powerpc-specific implementation of __access_noerrno
that does not abort transactions before the executing syscall.
Tested on powerpc{|64|64le}.
[BZ #22685]
* sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION_IMPL): Renamed
from ABORT_TRANSACTION.
(ABORT_TRANSACTION): Redirect to ABORT_TRANSACTION_IMPL.
* sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION,
ABORT_TRANSACTION_IMPL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/not-errno.h: New file. Reuse
Linux code, but remove the code that aborts transactions.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reported-by: Robert Pluim <rpluim@gmail.com>
* localedata/locales/gu_IN (LC_IDENTIFICATION): Fix an obvious typo
in date: "2004-14-09" should be "2004-09-14".
* localedata/locales/lo_LA: Fix an obvious typo in date in the header:
"2003-15-09" should be "2003-09-15".
When posix_memalign is called with an alignment less than MALLOC_ALIGNMENT
and a requested size close to SIZE_MAX, it falls back to malloc code
(because the alignment of a block returned by malloc is sufficient to
satisfy the call). In this case, an integer overflow in _int_malloc leads
to posix_memalign incorrectly returning successfully.
Upon fixing this and writing a somewhat thorough regression test, it was
discovered that when posix_memalign is called with an alignment larger than
MALLOC_ALIGNMENT (so it uses _int_memalign instead) and a requested size
close to SIZE_MAX, a different integer overflow in _int_memalign leads to
posix_memalign incorrectly returning successfully.
Both integer overflows affect other memory allocation functions that use
_int_malloc (one affected malloc in x86) or _int_memalign as well.
This commit fixes both integer overflows. In addition to this, it adds a
regression test to guard against false successful allocations by the
following memory allocation functions when called with too-large allocation
sizes and, where relevant, various valid alignments:
malloc, realloc, calloc, reallocarray, memalign, posix_memalign,
aligned_alloc, valloc, and pvalloc.
Remove myself, give the full credit to Egmont Koblinger.
When committing someone else's changes, one should put the contributor's
name in the change log entry.
* localedata/locales/bho_NP (LC_IDENTIFICATION): Fix an obvious typo
in date: "2017-24-07" should be "2017-07-24".
* localedata/locales/mai_IN: Likewise.
* localedata/locales/mai_NP: Likewise.
The only architecture in glibc that uses the generic debug/backtrace.c
is hppa. The debug/tst-backtrace* tests fail for hppa, so in fact the
generic debug/backtrace.c is not functional anywhere. Instead, the
x86_64 version is a reasonably generic version that uses
_Unwind_Backtrace from libgcc to backtrace using unwind info, and is
used by several architectures. This patch adds hppa to the
architectures using it (leaving open the possibility of a subsequent
cleanup for 2.28 of moving the x86_64 version to debug/backtrace.c,
and removing all the frame.h files that are now unused).
Reported by Adhemerval in
<https://sourceware.org/ml/libc-alpha/2018-01/msg00564.html> that this
does fix the backtrace test failures for hppa.
[BZ #22719]
* sysdeps/hppa/backtrace.c: New file.
_dl_runtime_profile calls _dl_call_pltexit, passing a pointer to
La_x86_64_retval which is allocated on stack. The lrv_vector0
field in La_x86_64_retval must be aligned to size of vector register.
When allocating stack space for La_x86_64_retval, we need to make sure
that the address of La_x86_64_retval + RV_VECTOR0_OFFSET is aligned to
VEC_SIZE. This patch checks the alignment of the lrv_vector0 field
and pads the stack space if needed.
Tested with x32 and x86-64 on SSE4, AVX and AVX512 machines. It fixed
FAIL: elf/tst-audit10
FAIL: elf/tst-audit4
FAIL: elf/tst-audit5
FAIL: elf/tst-audit6
FAIL: elf/tst-audit7
on x32 AVX512 machine.
[BZ #22715]
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_profile): Properly
align La_x86_64_retval to VEC_SIZE.
The x86_64 backtrace implementation is used as a generic
implementation (unwinding via unwind info and _Unwind_Backtrace) by
various other architectures. This patch makes it more generic by
making it use LIBGCC_S_SO from gnu/lib-names.h instead of hardcoding
the libgcc_s.so.1 name, so that it can also be used on hppa which uses
libgcc_s.so.4.
Tested for x86_64.
* sysdeps/x86_64/backtrace.c: Include <gnu/lib-names.h>.
(init): Use LIBGCC_S_SO not hardcoded "libgcc_s.so.1".
Define new HWCAP bits and add their name to dl-procinfo.c following
the linux definitions. Synchronizing with v4.15-rc8 version of linux,
these are not expected to change before the 4.15 release.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SHA3): Define.
(HWCAP_SM3, HWCAP_SM4, HWCAP_ASIMDDP, HWCAP_SHA512, HWCAP_SVE): Define.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c
(_dl_aarch64_cap_flags): Update.
(_DL_HWCAP_COUNT): Update.
Remove unused _DL_HWCAP_LAST definition and move _DL_HWCAP_COUNT
where it is needed (dl-procinfo.h always includes dl-procinfo.c).
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h
(_DL_HWCAP_LAST): Remove.
(_DL_HWCAP_COUNT): Move to ...
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c
(_DL_HWCAP_COUNT): ... here.
This patch synchronizes DF_1_* flags with binutils
and ensures that all DF_1_* flags defined in binutil's
include/elf/common.h are also defined glibc's elf/elf.h.
This is a user visible change since elf/elf.h is installed
by default as /usr/include/elf.h.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This issue is similar to BZ #19235, where spurious exceptions are
created from adding 0.5 then converting to an integer.
The solution is based on Joseph's fix for BZ #19235.
[BZ #22697]
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S (__llround):
Do not add 0.5 to integer or out-of-range arguments.
In the static pie enabled libc, crt1.o uses the same position independent
code as rcrt1.o and crt1.o is used instead of Scrt1.o when -no-pie
executables are linked. When main is not defined in the executable, but
in a shared library crt1.o is currently broken, it assumes main is local.
(glibc has a test for this but i missed it in my previous testing.)
To make both rcrt1.o and crt1.o happy with the same code, a wrapper is
introduced around main: with this crt1.o works with extern main symbol
while rcrt1.o does not depend on GOT relocations. (The change only
affects static pie enabled libc. Further simplification of start.S is
possible in the future by using the same approach for Scrt1.o too.)
* aarch64/start.S (_start): Use __wrap_main.
(__wrap_main): New local symbol.
Currently getcwd(3) can succeed without returning an absolute path
because the underlying getcwd syscall, starting with linux commit
v2.6.36-rc1~96^2~2, may succeed without returning an absolute path.
This is a conformance issue because "The getcwd() function shall
place an absolute pathname of the current working directory
in the array pointed to by buf, and return buf".
This is also a security issue because a non-absolute path returned
by getcwd(3) causes a buffer underflow in realpath(3).
Fix this by checking the path returned by getcwd syscall and falling
back to generic_getcwd if the path is not absolute, effectively making
getcwd(3) fail with ENOENT. The error code is chosen for consistency
with the case when the current directory is unlinked.
[BZ #22679]
CVE-2018-1000001
* sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to
generic_getcwd if the path returned by getcwd syscall is not absolute.
* io/tst-getcwd-abspath.c: New test.
* io/Makefile (tests): Add tst-getcwd-abspath.
The current date format prefixes one-digit days with a space, resulting
in ugly two spaces:
$ LC_ALL=hu_HU.UTF-8 date
2018. jan. 1., hétfő, 21:25:35 CET
^^
The official orthography rules doesn't contain an explicit rule about
this (which already gives no sane reason for double space), and an
implicit example of "1848. március 9." under bullet point 296 at
http://helyesiras.mta.hu/helyesiras/default/akh12 contains a single
space only. It's sure not convincing on an HTML page, but I confirm
that the official book edition (e.g.
https://www.libri.hu/en/konyv/a-magyar-helyesiras-szabalyai-32.html)
also contains a single space there.
[BZ #22657]
* localedata/locales/hu_HU (d_t_fmt): Avoid a leading space
before the day number which may produce a double space.
(date_fmt): Likewise.
My fix for bug 22702 introduced linknamespace test failures on
s390x-linux-gnu and s390-linux-gnu because it made remainder call
__feholdexcept, and the s390 __feholdexcept calls fegetenv, and
remainder is in Unix98 and XPG4.2 but fegetenv isn't. This patch
makes __feholdexcept call __fegetenv instead to avoid that namespace
issue.
Tested (compilation) with build-many-glibcs.py for s390x-linux-gnu,
where it resolves the test failures.
* sysdeps/s390/fpu/feholdexcpt.c (__feholdexcept): Call __fegetenv
instead of fegetenv.
For soft-float powerpc, the math/test-nearbyint-except-2 test fails
because nearbyintl traps when traps on "inexact" are enabled on entry
(and an "inexact" exception is generated internally, though cleared
for the final return).
The problem is the default implementation of
libc_feholdsetround_noex_ctx, which does not disable exception traps.
There is some ambiguity about whether the *noex* interfaces are
required to do so or only permitted to do so. But given that we
support fe* interfaces to enable and disable traps (on architectures
with that functionality), functions that must not raise an exception
(must not leave the flag set on exit if not set on entry) should also
not trap on it when traps on that exception are enabled. So it is
appropriate to define these interfaces to have the feholdexcept effect
of disabling exception traps; this patch updates the default
implementation and comments accordingly.
At least some architecture versions already disable traps; there are
few uses of the *noex* interfaces at all, and while it's possible
there are bugs on any architecture versions failing to disable traps
that appear in the exp2 and remainder implementations, there are
currently no tests, other than this one for nearbyintl (where only the
ldbl-128ibm implementation uses SET_RESTORE_ROUND_NOEX), that would
fail as a result of such a bug. (Hard-float powerpc does disable
traps here, hence the nearbyintl failure not appearing there.)
Tested for powerpc (soft-float). This brings that configuration to
clean math/ test results, provided you build with GCC 8 to get the fix
for GCC bug 64811.
[BZ #22702]
* sysdeps/generic/math_private.h (libc_feresetround_noex): Update
comment to say exceptions are discarded.
(libc_feholdsetround_noex_ctx): Use __feholdexcept instead of
__fegetenv.
(SET_RESTORE_ROUND_NOEX): Update comment to say non-stop mode must
be enabled.
I verified that without the guard accounting change in commit
630f4cc3aa (Fix stack guard size
accounting) and RTLD_NOW for libgcc_s introduced by commit
f993b87540 (nptl: Open libgcc.so with
RTLD_NOW during pthread_cancel), the tst-minstack-cancel test fails on
an AVX-512F machine. tst-minstack-exit still passes, and either of
the mentioned commit by itself frees sufficient stack space to make
tst-minstack-cancel pass, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The ldbl-128ibm implementation of log1pl does ordered comparisons on a
negative qNaN argument, so resulting in spurious "invalid" exceptions
(for soft-float powerpc; hard-float only avoids this because of GCC
bug 58684 meaning ordered comparison instructions never get
generated). This patch fixes this by arranging for the test for NaN
or infinity arguments to handle negative arguments as well.
Tested for powerpc (soft float).
[BZ #22693]
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Handle
negative arguments in test for NaN or infinity argument.
Disabling lazy binding reduces stack usage during unwinding.
Note that RTLD_NOW only makes a difference if libgcc.so has not
already been loaded, so this is only a partial fix.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* hurd/hurd/fd.h: Include <fcntl.h>
(__hurd_at_flags): New function.
* hurd/lookup-at.c (__file_name_lookup_at): Replace flag computation
with call to __hurd_at_flags.
* include/unistd.h (__faccessat, __faccessat_noerrno): Add declaration.
* sysdeps/mach/hurd/access.c (access_common): Move implementation to
__faccessat
(hurd_fail_seterrno, hurd_fail_noerrno): Move to sysdeps/mach/hurd/faccessat.c.
(__access_noerrno): Use __faccessat_common instead of access_common.
(__access): Likewise.
* sysdeps/mach/hurd/euidaccess.c (__euidaccess): Replace implementation
with a call to __faccessat.
* sysdeps/mach/hurd/faccessat.c (faccessat): Rename into...
(__faccessat_common): ... this. Move implementation of __access into it when
AT_FLAGS does not contain AT_EACCESS. Make it call __hurd_at_flags, add
reauthenticate_cwdir_at helper to implement AT mechanism.
(__faccessat_noerrno): New function, just calls __faccessat_common.
(__faccessat): New function, just calls __faccessat_common.
(faccessat): Define weak alias.
For soft-float powerpc, fmaxmagl and fminmagl generate spurious
"invalid" exceptions for quiet NaN arguments. This is another case of
the problems with fabsl inline expansion via comparisons, and so is
fixed by building those functions with -fno-builtin-fabsl.
Tested for powerpc (soft-float).
[BZ #22691]
* sysdeps/powerpc/nofpu/Makefile [$(subdir) = math]
(CFLAGS-s_fmaxmagl.c): New variable.
[$(subdir) = math] (CFLAGS-s_fminmagl.c: Likewise.
The ldbl-128ibm implementations of lrintl and lroundl are missing
"invalid" exceptions for certain overflow cases when compiled with GCC
8. The cause of this is after-the-fact integer overflow checks that
fail when the compiler optimizes on the basis of integer overflow
being undefined; GCC 8 must be able to detect new cases of
undefinedness here.
Failure: lrint (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_downward (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_towardzero (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_upward (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_downward (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_towardzero (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_upward (-0x80000001p0): Exception "Invalid operation" not set
(Tested that these failures occur before the patch for powerpc
soft-float, but the issue applies in principle for hard-float as well,
whether or not the particular optimizations in fact occur there at
present.)
This patch fixes the bug by ensuring the additions / subtractions in
question cast arguments to unsigned long int, or use 1UL as a constant
argument, so that the arithmetic occurs in an unsigned type with the
result then converted back to a signed type.
Tested for powerpc (soft-float).
[BZ #22690]
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c (__lrintl): Use unsigned
long int for arguments of possibly overflowing addition or
subtraction.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c (__lroundl): Likewise.
For soft-float powerpc, the remainderl function produces zero results
with the wrong sign for various inputs. This is another instance of
the problem with incorrect built-in fabsl expansion, so is fixed by
this patch using -fno-builtin-fabsl for this function.
Tested for powerpc (soft-float).
[BZ #22688]
* sysdeps/powerpc/nofpu/Makefile [$(subdir) = math]
(CFLAGS-e_remainderl.c): New variable.
For soft-float powerpc, various _Complex long double functions
generate spurious "invalid" exceptions, even with a compiler with GCC
bug 64811 fixed.
The problem is GCC's built-in fabsl expansion. Various files are
already built with -fno-builtin-fabsl because in this case (IBM long
double, for soft-float or e500v1) a fallback fabsl expansion based on
comparisons is used, which can produce the wrong sign of a zero
result. Those comparisons can also produce spurious exceptions for
NaN arguments. Furthermore, __builtin_fpclassify implemently uses
__builtin_fabsl, and is unaffected by -fno-builtin-fabsl, and the
fpclassify macro uses __builtin_fpclassify in the absence of
-fsignaling-nans. Thus, this patch arranges for the problem files
using fpclassify to be built with -fsignaling-nans in this case, to
avoid spurious exceptions from fpclassify.
Tested for powerpc (soft-float).
[BZ #22687]
* sysdeps/powerpc/nofpu/Makefile (CFLAGS-s_cacosl.c): New
variable.
(CFLAGS-s_cacoshl.c): Likewise.
(CFLAGS-s_casinhl.c): Likewise.
(CFLAGS-s_catanl.c): Likewise.
(CFLAGS-s_catanhl.c): Likewise.
(CFLAGS-s_cexpl.c): Likewise.
(CFLAGS-s_ccoshl.c): Add -fsignaling-nans.
(CFLAGS-s_csinhl.c): Likewise.
(CFLAGS-s_clogl.c): Likewise.
(CFLAGS-s_clog10l.c): Likewise.
(CFLAGS-s_csinl.c): Likewise.
(CFLAGS-s_csqrtl.c): Likewise.
From: Emilio Pozuelo Monfort <pochu27@gmail.com>
From: Svante Signell <svante.signell@gmail.com>
Pass the file paths of executable to the exec server, both relative and
absolute, which exec needs to properly execute and avertise #!-scripts.
Previously, the exec server tried to guess the name from argv[0] but argv[0]
only contains the executable name by convention.
* hurd/hurdexec.c (_hurd_exec): Deprecate function.
(_hurd_exec_paths): New function.
* hurd/hurd.h (_hurd_exec): Deprecate function.
(_hurd_exec_paths): Declare function.
* hurd/Versions: Export _hurd_exec_paths.
* sysdeps/mach/hurd/execve.c: Include <stdlib.h> and <stdio.h>
(__execve): Use __getcwd to build absolute path, and use
_hurd_exec_paths instead of _hurd_exec.
* sysdeps/mach/hurd/spawni.c: Likewise.
* sysdeps/mach/hurd/fexecve.c: Use _hurd_exec_paths instead of
_hurd_exec.
The old implementation based on hsearch_r used an ad-hoc C string
encoding and produced an incorrect format on the wire for domain
names which contained bytes which needed escaping when printed.
This commit switches to ns_name_pton for the wire format conversion
(now that we have separate tests for it) and uses a tsearch tree
with a suitable comparison function to locate compression targets.
The previous implementation of the TEST_COMPARE macro would fail
to compile code like this:
int ret = res_send (query, sizeof (query), buf, sizeof (buf));
TEST_COMPARE (ret,
sizeof (query)
+ 2 /* Compression reference. */
+ 2 + 2 + 4 + 2 /* Type, class, TTL, RDATA length. */
+ 1 /* Pascal-style string length. */
+ strlen (expected_name));
This resulted in a failed static assertion, "integer conversions
may alter sign of operands". A user of the TEST_COMPARE would have
to add a cast to fix this.
This patch reverts to the original proposed solution of a run-time
check, making TEST_COMPARE usable for comparisons of numbers with
types with different signedness in more contexts.
Previously if user requested S stack and G guard when creating a
thread, the total mapping was S and the actual available stack was
S - G - static_tls, which is not what the user requested.
This patch fixes the guard size accounting by pretending the user
requested S+G stack. This way all later logic works out except
when reporting the user requested stack size (pthread_getattr_np)
or when computing the minimal stack size (__pthread_get_minstack).
Normally this will increase thread stack allocations by one page.
TLS accounting is not affected, that will require a separate fix.
[BZ #22637]
* nptl/descr.h (stackblock, stackblock_size): Update comments.
* nptl/allocatestack.c (allocate_stack): Add guardsize to stacksize.
* nptl/nptl-init.c (__pthread_get_minstack): Remove guardsize from
stacksize.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
Since the x86-64 assembly version of sincosf is higly optimized with
vector instructions, there isn't much room for improvement. However
s_sincosf.c written in C with vector math and intrinsics can be
optimized by GCC with FMA.
On Skylake, bench-sincosf reports performance improvement:
Assembly FMA improvement
max 104.042 101.008 3%
min 9.426 8.586 10%
mean 20.6209 18.2238 13%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sincosf-sse2 and s_sincosf-fma.
(CFLAGS-s_sincosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if
__sincosf is defined.
GCC PR 83641 results in a miscompilation of libpthread, which
causes pthread_exit not to restore callee-saved registers before
running destructors for objects on the stack. This test detects
this situation:
info: unsigned int, direct pthread_exit call
tst-thread-exit-clobber.cc:80: numeric comparison failure
left: 4148288912 (0xf741dd90); from: value
right: 1600833940 (0x5f6ac994); from: magic_values.v2
info: double, direct pthread_exit call
info: unsigned int, indirect pthread_exit call
info: double, indirect pthread_exit call
error: 1 test failures
Commit 24731685 ("prlimit: Translate old_rlimit from RLIM64_INFINITY to
RLIM_INFINITY") broken the getrlimit64 for 32-bit configurations which
do no need the 2GiB limited compat getrlimit (default version >= 2.2).
This patch fixes that by restoring the weak alias in that case.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64 (getrlimit64)
[!__RLIM_T_MATCHES_RLIM64_T]
[!SHLIB_COMPAT (libc, GLIBC_2_1, GLIBC_2_2)]: Define as weak alias of
__getrlimit64. Add libc_hidden_weak.
This follows c45d78aac ('posix: Fix generic p{read,write}v buffer allocation
(BZ#22457)'), which made pwritev to use __mmap instead of __posix_memalign,
but didn't pass PROT_READ to it, while the pwrite() call does need to
read the data we have just copied over.
* sysdeps/posix/pwritev_common.c: Add PROT_READ to __mmap prot.
`make check' sometimes triggers a rebuild of librt.so using
nptl/Makefile, which ignores librt's dependence on libpthread. This
causes the build to blow up when we attempt to run the test suite on
RISC-V.
2018-01-06 Palmer Dabbelt <palmer@sifive.com>
* nptl/Makefile (/librt.so): Always depend on
"$(shared-thread-library)".
The RISC-V port will have libraries in subdirectories of lib, like
"lib64/lp64d". This adds support for stripping these installed
libraries.
2018-01-06 Palmer Dabbelt <palmer@sifive.com>
* scripts/build-many-glibcs.py (class Glibc): Strip shared objects
in subdirectories of lib.
The RISC-V Linux port defines VDSO symbols
2018-01-06 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME_LINUX_4_15): New
define.
(VDSO_HASH_LINUX_4_15): Likewise.
The RISC-V Linux ABI doesn't define any libraries that go directly in
lib, instead they go into lib32/ilp32 or lib64/lp64. This casuse
make-link-multidir to fail when attempting to make library directories
when building a static libc on multilib RISC-V systems.
This patch uses scripts/mkinstalldirs to make the base directory of the
target symlink of make-link-multidir.
2018-01-06 Palmer Dabbelt <palmer@sifive.com>
* Makerules (make-link-multidir): Make directories before linking into
them.
This follows ccf970c7a ('posix: Add compat glob symbol to not follow
dangling symbols') by adding to gnu/ the same compatibility as for Linux.
* sysdeps/gnu/glob64.c (__glob): Define macro instead of glob macro.
(__glob64): Define GLIBC_2_27 versioned symbol instead of glob64.
* sysdeps/gnu/glob-lstat-compat.c: New file.
* sysdeps/gnu/glob64-lstat-compat.c: New file.
The function _itoa_word() writes characters from the higher address to
the lower address, requiring the destination string to reserve that size
before calling it.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_reloc_overflow):
Reserve 16 chars to reloc_addr before calling _itoa_word.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a test to check that the getrlimit, setrlimit and prlimit functions
and their 64-bit equivalent behave correctly with RLIM_INFINITY and
RLIM64_INFINITY. For that it assumes that the prlimit64 function calls
the syscall directly without translating the value and that the kernel
uses the -1 value to represent infinity.
It first finds a resource with the hard limit set to infinity so the
soft limit can be manipulated easily and check for the consistency
between the value set or get by the prlimit64 and the other functions.
It is Linux specific add it uses the prlimit and prlimit64 functions.
Changelog:
* sysdeps/unix/sysv/linux/tst-rlimit-infinity.c: New file.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-rlimit-infinity.
prlimit called without a new value fails on 32-bit machines if any of
the soft or hard limits are infinity. This is because prlimit does not
translate old_rlimit from RLIM64_INFINITY to RLIM_INFINITY, but checks
that the value returned by the prlimit64 syscall fits into a 32-bit
value, like it is done for example in getrlimit. Note that on the
other hand new_rlimit is correctly translated from RLIM_INFINITY to
RLIM64_INFINITY before calling the syscall.
This patch fixes that.
Changelog:
[BZ #22678]
* sysdeps/unix/sysv/linux/prlimit.c (prlimit): Translate
old_rlimit from RLIM64_INFINITY to RLIM_INFINITY.
Fix the RLIM_INFINITY and RLIM64_INFINITY constants on alpha to match
the kernel one and all other architectures. Change the getrlimit,
getrlimit64, setrlimit, setrlimit64 into old compat symbols, and provide
the Linux generic functions as GLIBC_2_27 version.
Changelog:
* sysdeps/unix/sysv/linux/getrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define getrlimit and getrlimit64 as weak aliases of __getrlimit64.
Define __GI_getrlimit64 as weak alias of __getrlimit64.
[__RLIM_T_MATCHES_RLIM64_T]: Do not redefine SHLIB_COMPAT, use #elif
instead.
* sysdeps/unix/sysv/linux/setrlimit64.c [USE_VERSIONED_RLIMIT]: Do not
define setrlimit and setrlimit64 as weak aliases of __setrlimit64.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (RLIM_INFINITY,
RLIM64_INFINITY): Fix values to match the kernel ones.
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Define
USE_VERSIONED_RLIMIT. Rename __getrlimit64 into __old_getrlimit64 and
provide it as getrlimit@@GLIBC_2_0 and getrlimit64@@GLIBC_2_1. Add a
__getrlimit64 function and provide it as getrlimit@@GLIBC_2_27 and
getrlimit64@@GLIBC_2_27.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto with setrlimit
and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.27): Add
getrlimit, setrlimit, getrlimit64 and setrlimit64.
* sysdeps/unix/sysv/linux/alpha/Versions (libc): Add getrlimit,
setrlimit, getrlimit64 and setrlimit64.
RLIM64_INFINITY was supposed to be a glibc convention rather than
anything seen by the kernel, but it ended being passed to the kernel
through the prlimit64 syscall.
* On the kernel side, the value is defined for the prlimit64 syscall for
all architectures in include/uapi/linux/resource.h:
#define RLIM64_INFINITY (~0ULL)
* On the kernel side, the value is defined for getrlimit and setrlimit
in arch/alpha/include/uapi/asm/resource.h
#define RLIM_INFINITY 0x7ffffffffffffffful
* On the GNU libc side, the value is defined in
sysdeps/unix/sysv/linux/alpha/bits/resource.h:
# define RLIM64_INFINITY 0x7fffffffffffffffLL
This was not an issue until the getrlimit and setrlimit glibc functions
have been changed in commit 045c13d185 ("Consolidate Linux setrlimit and
getrlimit implementation") to use the prlimit64 syscall instead of the
getrlimit and setrlimit ones.
This patch fixes that by adding a wrapper to fix the value passed to or
received from the kernel, before or after calling the prlimit64 syscall.
Changelog:
[BZ #22648]
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: New file.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Ditto.
This patch increases timeouts on three tests I observed timing out on
slow systems.
* malloc/tst-malloc-tcache-leak.c (TIMEOUT): Define to 50.
* posix/tst-glob-tilde.c (TIMEOUT): Define to 200.
* resolv/tst-resolv-res_ninit.c (TIMEOUT): Define to 50.
As discussed in libc-alpha [1], alpha trunc{f} implementation uses
addt/suc and subt/suc and although the Alpha Architecture
Handbook version 3 states that that ADDx SUBx OUTPUT Exceptions
(B.3 Mapping to IEEE Standard) should not generate Inexact if INE
bit is set, the Alpha 21264 [2] chip manual (A.8 IEEE Floating-Point
Conformance) states that ADDx SUBx OUTPUT does generate inexact
exception for inexact result regardless.
As Joseph noted [3] to correctly fix it on alpha we need to either
avoid the instruction or avoid any inexact bit from it being set
on return from the function (while preserving the inexact bit that
might be set on the entry to the function). The later will result
mf_fpcr followed by a mt_fpcr to get and set the fpcr which will
defeat the optimization itself.
So the patch just remove the alpha optimized and rely on generic
implementation. It fixes the math/test-*-{trunc} on alpha.
[BZ #15479]
[BZ #22666]
* sysdeps/alpha/fpu/s_trunc.c: Remove file.
* sysdeps/alpha/fpu/s_truncf.c: Likewise.
[1] https://sourceware.org/ml/libc-alpha/2018-01/msg00114.html
[2] https://www.star.bnl.gov/public/daq/HARDWARE/21264_data_sheet.pdf
[3] https://sourceware.org/ml/libc-alpha/2018-01/msg00086.html
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
As discussed in libc-alpha [1], alpha ceil{f} and floor{f}
implementation uses cvttq/svm and although the Alpha Architecture
Handbook version 3 states that that CVTfi OUTPUT Exceptions
(B.3 Mapping to IEEE Standard) should not generate Inexact if INE
bit is set on fpcr, the Alpha 21264 [1] chip manual (A.8 IEEE
Floating-Point Conformance) states that CVTfi and CVTif OUTPUT
does generate inexact exception for inexact result regardless.
As Joseph noted [2] to correctly fix it on alpha we need to either
avoid the instruction or avoid any inexact bit from it being set
on return from the function (while preserving the inexact bit that
might be set on the entry to the function). The later will result
mf_fpcr followed by a mt_fpcr to get and set the fpcr which will
defeat the optimization itself.
So the patch just remove the alpha optimized and rely on generic
implementation. It fixes the math/test-*-{ceil,floor} on alpha.
[BZ #15479]
[BZ #22665]
* sysdeps/alpha/fpu/s_ceil.c: Remove file.
* sysdeps/alpha/fpu/s_ceilf.c: Likewise.
* sysdeps/alpha/fpu/s_floor.c: Likewise.
* sysdeps/alpha/fpu/s_floorf.c: Likewise.
[1] https://www.star.bnl.gov/public/daq/HARDWARE/21264_data_sheet.pdf
[2] https://sourceware.org/ml/libc-alpha/2018-01/msg00086.html
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Before this change, if glibc was compiled with SSE instructions and a
sufficiently recent GCC, an unaligned stack access in
__run_exit_handlers would cause stdlib/tst-makecontext to crash.
This commit adds a new _dl_open_hook entry for dlvsym and implements the
function using the existing dl_lookup_symbol_x function supplied by the
dynamic loader.
A new hook variable, _dl_open_hook2, is introduced, which should make
this change suitable for backporting: For old statically linked
binaries, __libc_dlvsym will always return NULL.
Currently math_errhandling is always set to MATH_ERRNO | MATH_ERREXCEPT
even if -fno-math-errno is used. It is not defined at all when fast-math
is used. Set it to 0 with fast-math - this is noncomforming but more
useful than not define math_errhandling at all. Also take __NO_MATH_ERRNO__
into account and update comment.
* math/math.h (math_errhandling): Set to 0 with __FAST_MATH__.
Add __NO_MATH_ERRNO__ check.
Changelog:
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c (__old_getrlimit64):
Drop __RLIM_T_MATCHES_RLIM64_T conditional as __old_getrlimit64 is
never defined in that case.
Changelog:
* sysdeps/unix/sysv/linux/alpha/getrlimit64.c: Fix a typo in the
comment.
* sysdeps/unix/sysv/linux/alpha/setrlimit64.c: Fix a typo in the
comment.
(settrlimit): Rename into setrlimit.
(__sttrlimit): Rename into __setrlimit.
I found that "make regen-ulps" failed when building with unmodified
GNU make 4.1, and an objdir /some/where/math/ longer than about 37
characters, because the list of tests in the "for run in $^" loop
exceeded the Linux kernel's MAX_ARG_STRLEN limit (131072 bytes) on the
length of a single argument passed to a command.
Some GNU/Linux distributions have a patch to make to work around this
limit (see e.g. Debian bug 688601), but clearly this ought to work
without needing such a patch. This patch arranges for the shell loop
to be over the test names without a $(objdir) prefix, which reduces
the space used to less than half MAX_ARG_STRLEN.
(I think we ought to aim to get rid of bits/mathinline.h completely -
filing GCC bugs for any optimizations GCC can't currently do with
-ffast-math - which would mean we could halve the number of libm tests
run because separate inline function tests would no longer be needed.
However, with a long directory name even half the number of tests
could make this command exceed MAX_ARG_STRLEN without my patch.)
Tested regen-ulps on a system where it failed before this patch.
* math/Makefile (run-regen-ulps): Add $(objpfx) to test name here.
(regen-ulps): Use $(libm-tests) not $^ in shell loop.
Various fmax and fmin function implementations mishandle sNaN
arguments:
(a) When both arguments are NaNs, the return value should be a qNaN,
but sometimes it is an sNaN if at least one argument is an sNaN.
(b) Under TS 18661-1 semantics, if either argument is an sNaN then the
result should be a qNaN (whereas if one argument is a qNaN and the
other is not a NaN, the result should be the non-NaN argument).
Various implementations treat sNaNs like qNaNs here.
One way to fix that is to detect the sNaN and add a special case. That
said there is no FPU instruction to do that, so it requires transfering
the FP value to an integer register and testing bits. This becomes quite
complicated so it's probably better to just use the generic versions of
these functions which just do that through issignaling.
Changelog:
[BZ #22660]
* sysdeps/alpha/fpu/s_fmax.S: Remove file.
* sysdeps/alpha/fpu/s_fmaxf.S: Likewise.
* sysdeps/alpha/fpu/s_fmin.S: Likewise.
* sysdeps/alpha/fpu/s_fminf.S: Likewise.
This patch updates various files from their upstream sources. This
brings in copyright date updates for some of those files.
Tested for x86_64.
* manual/texinfo.tex: Update to version 2017-12-26.21 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-01-01.
* scripts/config.sub: Update to version 2018-01-01.
* scripts/move-if-change: Update from gnulib.
The patch which moved libio.h proper into the bits directory also
changed the name of its guard macro, and I neglected to check whether
anything depended on that name. It turns out that there is a
conditionally-used bits header that looks at it; this broke the libgcc
build on at least sparc64-*-* and sparcv9-*-*.
* libio/bits/libio-ldbl.h: Correct check for improper
inclusion. Add own multiple include guard.
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
Move a shared part of sys/ptrace.h which is the same on all
architectures to a separate file.
* sysdeps/unix/sysv/linux/sys/ptrace.h: Include <bits/ptrace-shared.h>.
(__ptrace_setoptions, __ptrace_eventcodes, __ptrace_peeksiginfo_args,
__ptrace_peeksiginfo_flags, ptrace): Move to ...
* sysdeps/unix/sysv/linux/bits/ptrace-shared.h: ... new file.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/ptrace-shared.h.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Include
<bits/ptrace-shared.h>.
(__ptrace_setoptions, __ptrace_eventcodes, __ptrace_peeksiginfo_args,
__ptrace_peeksiginfo_flags, ptrace): Remove.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h: Likewise.
malloc and realloc may set errno to ENOMEM even if they are successful.
The scandir code wrongly assume that they do not change errno, this
causes scandir to fail with ENOMEM even if malloc succeed.
The code already handles that readdir might set errno by calling
__set_errno (0) to clear the error. Move that part at the end of the
loop to also take malloc and realloc into account.
Changelog:
[BZ #17804]
* dirent/scandir-tail.c (SCANDIR_TAIL): Move __set_errno (0) at the
end of the loop. Improve comments.
The current glibc manual is ambiguous about the errno value on success
and suggests that it is left unchanged. Some functions might and
sometimes do change the errno value, however they never set it to 0.
This patch from Zack Weinberg clarifies this section of the manual.
Changelog:
[BZ #22615]
* manual/errno.texi (Checking for Errors): Explicitly say that errno
might be set on success.
POSIX explicitly says that applications should check errno only after
failure, so the errno value can be clobbered on success as long as it
is not set to zero.
Changelog:
[BZ #22611]
* malloc/tst-realloc.c (do_test): Remove the test checking that errno
is unchanged on success.
is_path argument is no longer used and could be safely removed.
* elf/dl-dst.h (DL_DST_COUNT): Remove is_path argument, all callers
updated.
* elf/dl-load.c (is_dst, _dl_dst_count, _dl_dst_substitute,
expand_dynamic_string_token): Likewise.
* sysdeps/generic/ldsodefs.h (_dl_dst_count, _dl_dst_substitute): Remove
is_path argument.
is_dst is called either by _dl_dst_count or by _dl_dst_substitute.
_dl_dst_count is called by DL_DST_COUNT only.
DL_DST_COUNT is called either by expand_dst with is_path == 0
or by expand_dynamic_string_token.
_dl_dst_substitute is called either from expand_dst with is_path == 0
or from expand_dynamic_string_token.
The latter function is called either from _dl_map_object with is_path == 0
or from fillin_rpath with is_path == 1 and name containing no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (is_dst): Remove checks that is_path is set and name
contains ':', and all code depending on these checks.
There are just two users of _dl_dst_substitute: one is expand_dst that
sets is_path argument to 0, another one is expand_dynamic_string_token.
The latter function also has just two users: one is _dl_map_object that
sets is_path argument to 0, another one is fillin_rpath that sets
is_path argument to 1 and name argument contains no ':'.
In any case (is_path && name[i] == ':') is always false and all code
depending on it can be safely removed.
* elf/dl-load.c (_dl_dst_substitute): Remove checks that is_path
is set and name contains ':', and all code depending on these checks.
libio.h was originally the header for a set of supported GNU
extensions, but they have not been maintained as such in many years,
they are now standing in the way of improvements to stdio, and we
don't think there are any remaining external users. _G_config.h was
never intended for public use, but predates the bits convention.
Move both of these headers into the bits directory and provide stubs
at top level which issue deprecation warnings.
The contents of (bits/)libio.h and (bits/)_G_config.h are still
exposed to external software via stdio.h; changing that requires more
complex surgery than I have time to attempt right now.
* libio/libio.h, libio/_G_config.h: New stub headers which issue a
deprecation warning and then include <bits/libio.h>, <bits/_G_config.h>
respectively.
* libio/libio.h: Rename the original version of this file to
libio/bits/libio.h. Error out if not included by stdio.h or the
stub libio.h.
* include/libio.h: Move to include/bits. Forward to libio/bits/libio.h.
* sysdeps/generic/_G_config.h: Move to top-level bits/. Error out
if not included by bits/libio.h or the stub _G_config.h.
* sysdeps/unix/sysv/linux/_G_config.h: Move to
sysdeps/unix/sysv/linux/bits. Error out if not included by
bits/libio.h or the stub _G_config.h.
* libio/stdio.h: Include bits/libio.h, not libio.h.
* libio/Makefile: Install bits/libio.h and bits/_G_config.h as
well as libio.h and _G_config.h.
* csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c
* libio/strfile.h, stdio-common/vfscanf.c
* sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c
Include stdio.h, not _G_config.h nor libio.h.
* libio/iofgetpos.c: Also rename fgetpos64 out of the way.
* libio/iofsetpos.c: Also rename fsetpos64 out of the way.
* scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
That way it matches the standard and the behaviour of the finite
function.
Changelog:
[BZ #22596]
* manual/arith.texi (finite): Fix the description of the return
value.
aarch64 has several ifuncs now so test it without multiarch support separately.
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
disable-multi-arch variant to aarch64-linux-gnu.
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2017-12-18.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2017-12-17.
* scripts/config.sub: Update to version 2017-11-23.
* scripts/install-sh: Update to version 2017-09-23.17.
* scripts/move-if-change: Update to version 2017-09-13 06:45.
With tilepro removal, the uppercase instruction are not anymore
required to be defines as potentially macros. This is a
mechanical change done by the following shell script:
---
INSNS="LD LD4U ST ST4 BNEZ BEQZ BEQZT BGTZ CMPEQI CMPEQ CMOVEQZ CMOVNEZ"
FILES=$(find sysdeps/tile sysdeps/unix/sysv/linux/tile -iname *.S)
for insn in $INSNS; do
repl=$(echo $insn | tr '[:upper:]' '[:lower:]')
sed -i 's/\b'$insn'\b/'$repl'/g' $FILES
done
---
Checked with a build for tilegx-linux-gnu and tilegx-linux-gnu-32 with
and without the patch, there is no difference in generated binary with
a dissassemble.
* sysdeps/tile/__longjmp.S (__longjmp): Use lowercase instructions.
* sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise.
* sysdeps/tile/_mcount.S (__mcount): Likewise.
* sysdeps/tile/crti.S (_init, _fini): Likewise.
* sysdeps/tile/crtn.S: Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/tile/dl-trampoline.S: Likewise.
* sysdeps/tile/setjmp.S (__sigsetjmp): Likewise.
* sysdeps/tile/start.S (_start): Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S (_clone): Likewise.
* sysdeps/unix/sysv/linux/tile/getcontext.S (__getcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/ioctl.S (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/tile/setcontext.S (__setcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/swapcontext.S (__swapcontext): Likewise.
* sysdeps/unix/sysv/linux/tile/syscall.S (syscall): Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S (__vfork): Likewise.
With tilepro support removal we can now simplify internal tile support by
moving the directory structure to avoid the unnecessary directory levels
in tile/tilegx both on generic and linux folders.
Checked with a build for tilegx-linux-gnu and tilegx-linux-gnu-32 with
and without the patch, there is no difference in generated binary with
a dissassemble.
* stdlib/bug-getcontext.c (do_test): Remove tilepro mention in
comment.
* sysdeps/tile/preconfigure: Remove tilegx folder.
* sysdeps/tile/tilegx/Implies: Move definitions to ...
* sysdeps/tile/Implies: ... here.
* sysdeps/tile/tilegx/Makefile: Move rules to ...
* sysdeps/tile/Makefile: ... here.
* sysdeps/tile/tilegx/atomic-machine.h: Move definitions to ...
* sysdeps/tile/atomic-machine.h: ... here. Add include guards.
* sysdeps/tile/tilegx/bits/wordsize.h: Move to ...
* sysdeps/tile/bits/wordsize.h: ... here.
* sysdeps/tile/tilegx/*: Move to ...
* sysdeps/tile/*: ... here.
* sysdeps/tile/tilegx/tilegx32/Implies: Move to ...
* sysdeps/tile/tilegx32/Implies: ... here.
* sysdeps/tile/tilegx/tilegx64/Implies: Move to ...
* sysdeps/tile/tilegx64/Implies: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/Makefile: Move definitions
to ...
* sysdeps/unix/sysv/linux/tile/Makefile: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/*: Move to ...
* sysdeps/unix/sysv/linux/tile/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx32/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx64/*: ... here.
This patch consolidates the pthread_join and gnu extensions to avoid
code duplication. The function pthread_join, pthread_tryjoin_np, and
pthread_timedjoin_np are now based on pthread_timedjoin_ex.
It also fixes some inconsistencies on ESRCH, EINVAL, EDEADLK handling
(where each implementation differs from each other) and also on
clenup handler (which now always use a CAS).
Checked on i686-linux-gnu and x86_64-linux-gnu.
* nptl/pthreadP.h (__pthread_timedjoin_np): Define.
* nptl/pthread_join.c (pthread_join): Use __pthread_timedjoin_np.
* nptl/pthread_tryjoin.c (pthread_tryjoin): Likewise.
* nptl/pthread_timedjoin.c (cleanup): Use CAS on argument setting.
(pthread_timedjoin_np): Define internal symbol and common code from
pthread_join.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (__lll_timedwait_tid):
Remove superflous checks.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (__lll_timedwait_tid):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All binaries use TLS and thus need a properly set up TCB, so we can
simply return its address directly, instead of forwarding to the
libpthread implementation from libc.
For versioned symbols, the dynamic linker checks that the soname matches
the name supplied by the link editor, so a compatibility symbol in
libpthread is needed.
To avoid linking against the libpthread function in all cases, we would
have to bump the symbol version of libpthread in libc.so and supply a
compat symbol. This commit does not do that because the function
implementation is so small, so the overhead by two active copies of the
same function might well be smaller than the increase in symbol table
size.
In C++ mode, __MATH_TG cannot be used for defining iseqsig, because
__MATH_TG relies on __builtin_types_compatible_p, which is a C-only
builtin. This is true when float128 is provided as an ABI-distinct type
from long double.
Moreover, the comparison macros from ISO C take two floating-point
arguments, which need not have the same type. Choosing what underlying
function to call requires evaluating the formats of the arguments, then
selecting which is wider. The macro __MATH_EVAL_FMT2 provides this
information, however, only the type of the macro expansion is relevant
(actually evaluating the expression would be incorrect).
This patch provides a C++ version of iseqsig, in which only the type of
__MATH_EVAL_FMT2 (__typeof or decltype) is used as a template parameter
for __iseqsig_type. This function calls the appropriate underlying
function.
Tested for powerpc64le and x86_64.
[BZ #22377]
* math/Makefile [C++] (tests): Add test for iseqsig.
* math/math.h [C++] (iseqsig): New implementation, which does
not rely on __MATH_TG/__builtin_types_compatible_p.
* math/test-math-iseqsig.cc: New file.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-test-math-iseqsig.cc): New variable.
There are just two users of fillin_rpath: one is decompose_rpath that
sets check_trusted argument to 0, another one is _dl_init_paths that
sets check_trusted argument to __libc_enable_secure and invokes
fillin_rpath only when LD_LIBRARY_PATH is non-empty.
Starting with commit
glibc-2.25.90-512-gf6110a8fee2ca36f8e2d2abecf3cba9fa7b8ea7d,
LD_LIBRARY_PATH is ignored for __libc_enable_secure executables,
so check_trusted argument of fillin_rpath is always zero.
* elf/dl-load.c (is_trusted_path): Remove.
(fillin_rpath): Remove check_trusted argument and its use,
all callers changed.
After
commit 9d7a3741c9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Dec 15 16:59:33 2017 -0800
Add --enable-static-pie configure option to build static PIE [BZ #19574]
and
commit 00c714df39
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Dec 18 12:24:26 2017 -0800
Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614]
$(no-pie-ldflag) is no longer effective since no-pie-ldflag is defined
to -no-pie only if GCC defaults to PIE. When --enable-static-pie is
used to configure glibc build and GCC doesn't default to PIE. no-pie-ldflag
is undefined and these tests:
elf/Makefile:LDFLAGS-tst-dlopen-aout = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-prelink = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-main1 = $(no-pie-ldflag)
gmon/Makefile:LDFLAGS-tst-gmon := $(no-pie-ldflag)
may fail to link. This patch replaces "-pie" with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie)
and repleces
LDFLAGS-* = $(no-pie-ldflag)
with
tst-*-no-pie = yes
so that tst-dlopen-aout, tst-prelink, tst-main1 and tst-gmon are always
built as non-PIE, with and without --enable-static-pie, regardless if
GCC defaults to PIE or non-PIE.
Tested with build-many-glibcs.py without --enable-static-pie as well as
with --enable-static-pie for x86_64, x32 and i686.
[BZ #22630]
* Makeconfig (link-pie-before-libc): Replace -pie with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie).
* elf/Makefile (LDFLAGS-tst-dlopen-aout): Removed.
(tst-dlopen-aout-no-pie): New.
(LDFLAGS-tst-prelink): Removed.
(tst-prelink-no-pie): New.
(LDFLAGS-tst-main1): Removed.
(tst-main1-no-pie): New.
* gmon/Makefile (LDFLAGS-tst-gmon): Removed.
(tst-gmon-no-pie): New.
To build static PIE, all .o files are compiled with -fPIE. Since
--enable-static-pie is designed to provide additional security hardening
benefits, it also implies that glibc programs and tests are created as
dynamic position independent executables (PIE) by default for better
security hardening.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
* manual/install.texi: Document that --enable-static-pie
implies PIE.
* INSTALL: Regenerated.
As noted in bug 21309, dbl-64/e_pow.c contains signed int shifts that,
although the shift count is in the range [0, 31], shift bits into and
beyond the sign bit and so are undefined in ISO C. Although this is
defined in GNU C, this patch from the bug cleans up the code to avoid
those shifts.
Tested for x86_64.
[BZ #21309]
* sysdeps/ieee754/dbl-64/e_pow.c (checkint): Make m and n
unsigned.
Sync with gnulib 0e14f025d2.
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Use a 'char *', not a 'void *', in pointer
arithmetic.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Problem reported by Tim Rühsen [1]. Sync with gnulib 0e14f025d2.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2017-10/msg00054.html
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Do not pass NULL to mempcpy.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
Current optimized ia64 memchr uses a strategy to check for last address
by adding the input one with expected size. However it does not take
care for possible overflow.
It was triggered by 3038145ca2 where default rawmemchr now uses memchr
(p, c, (size_t)-1).
This patch fixes it by implement a satured addition where overflows
sets the maximum pointer size to UINTPTR_MAX.
Checked on ia64-linux-gnu where it fixes both stratcliff and
test-rawmemchr failures.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
James Clarke <jrtc27@jrtc27.com>
[BZ #22603]
* sysdeps/ia64/memchr.S (__memchr): Avoid overflow in pointer
addition.
Since 3f823e87cc (Call exit directly in clone (BZ #21512)) SH clone
implementation fails to set the exit code resulting in the failures:
FAIL: nptl/tst-align-clone
FAIL: nptl/tst-getpid1
This patch fixes the both testcases.
[BZ #22605]
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Fix exit return
code.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support Shadow Stack in Intel Control-flow Enforcemen Technology.
cancel_jmp_buf has been updated to include saved_mask so that it is as
large as struct __jmp_buf_tag. We must suport the old cancel_jmp_buf
in existing binaries. Since symbol versioning doesn't work on
cancel_jmp_buf, feature_1 is added to tcbhead_t so that setjmp and
longjmp can check if shadow stack is enabled. NB: Shadow stack is
enabled only if all modules are shadow stack enabled.
[BZ #22563]
* sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/i386/nptl/tls.h (tcbhead_t): Add feature_1.
* sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Rename __glibc_unused1
to feature_1.
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support shadow stack in Intel Control-flow Enforcemen Technology.
Since the cancel_jmp_buf array is passed to setjmp and longjmp by
casting it to pointer to struct __jmp_buf_tag, it should be as large
as struct __jmp_buf_tag. Otherwise when shadow stack is enabled,
setjmp and longjmp will write and read beyond cancel_jmp_buf when saving
and restoring shadow stack pointer.
This patch adds bits/types/__cancel_jmp_buf_tag.h to define struct
__cancel_jmp_buf_tag so that Linux/x86 can add saved_mask to
cancel_jmp_buf.
Tested natively on i386, x86_64 and x32. Tested hppa-linux-gnu with
build-many-glibcs.py.
[BZ #22563]
* bits/types/__cancel_jmp_buf_tag.h: New file.
* sysdeps/unix/sysv/linux/x86/bits/types/__cancel_jmp_buf_tag.h
* sysdeps/unix/sysv/linux/x86/pthreaddef.h: Likewise.
* sysdeps/unix/sysv/linux/x86/nptl/pthreadP.h: Likewise.
* nptl/Makefile (headers): Add
bits/types/__cancel_jmp_buf_tag.h.
* nptl/descr.h [NEED_SAVED_MASK_IN_CANCEL_JMP_BUF]
(pthread_unwind_buf): Add saved_mask to cancel_jmp_buf.
* sysdeps/nptl/pthread.h: Include
<bits/types/__cancel_jmp_buf_tag.h>.
(__pthread_unwind_buf_t): Use struct __cancel_jmp_buf_tag with
__cancel_jmp_buf.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Likewise.
Since the default GCC and binutils versions used by build-many-glibcs.py,
which are GCC 7 branch and binutils 2.29 branch, support static PIE on
x86_64, x32 and i686, this patch adds --enable-static-pie glibc variants
to x86_64, x32 and i686 to get some coverage for static PIE.
Tested with build-many-glibcs.py.
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
--enable-static-pie variants to x86_64, x32 and i686.
m68k bits/mathinline.h declares various functions with const
attributes. These are inappropriate for functions that have results
depending on the rounding mode; the machine-independent
bits/mathcalls.h only uses const attributes for a very few functions
with no rounding mode dependence, and the m68k header should do
likewise. GCC uses pure for such functions with -frounding-math,
resulting in GCC mainline warning for conflicts with between the
header and the built-in attributes and glibc failing to build for m68k
with GCC mainline.
This patch fixes the attributes to avoid using const except when
bits/mathcalls.h does so. (There are a few functions where maybe
bits/mathcalls.h could do so but doesn't, but keeping the headers in
sync in this regard seems to be the safe approach.)
Tested compilation with build-many-glibcs.py with GCC mainline.
[BZ #22631]
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__m81_defun): Add
argument for attrubutes. All callers changed.
(__inline_mathop1): Likewise. All callers changed.
(__inline_mathop): Likewise. All callers changed.
[__USE_MISC] (scalbn): Use __inline_forward instead of
__inline_forward_c.
[__USE_ISOC99] (scalbln): Likewise.
[__USE_ISOC99] (nearbyint): Likewise.
[__USE_ISOC99] (lrint): Likewise.
[__USE_MISC] (scalbnf): Likewise.
[__USE_ISOC99] (scalblnf): Likewise.
[__USE_ISOC99] (nearbyintf): Likewise.
[__USE_ISOC99] (lrintf): Likewise.
[__USE_MISC] (scalbnl): Likewise.
[__USE_ISOC99] (scalblnl): Likewise.
[__USE_ISOC99] (nearbyintl): Likewise.
[__USE_ISOC99] (lrintl): Likewise.
* sysdeps/m68k/m680x0/fpu/mathimpl.h: All callers of
__inline_mathop and __m81_defun changed.
My fix to make the arm-linux-gnueabihf build-many-glibcs.py builds
actually use the hard-float ABI as intended showed up another issue
when building with mainline GCC: GCC now determines an FPU based on
the selected CPU or architecture and gives an error for
-mfloat-abi=hard when the CPU does not imply a choice of FPU. This
patch fixes all the affected configurations to specify a suitable
--with-cpu, --with-fpu or -mfpu option explicitly to avoid that error
from GCC.
Tested the relevant configurations with build-many-glibcs.py with
mainline GCC.
* scripts/build-many-glibcs.py (Context.add_all_configs): Specify
CPU or FPU for ARM hard-float configurations.
nptl/tst-attr3 fails to build with GCC mainline because of
(deliberate) aliasing between the second (attributes) and fourth
(argument to thread start routine) arguments to pthread_create.
Although both those arguments are restrict-qualified in POSIX,
pthread_create does not actually dereference its fourth argument; it's
an opaque pointer passed to the thread start routine. Thus, the
aliasing is actually valid in this case, and it's deliberate in the
test. So this patch makes the test disable -Wrestrict for the two
pthread_create calls in question. (-Wrestrict was added in GCC 7,
hence the __GNUC_PREREQ conditions, but the particular warning in
question is new in GCC 8.)
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* nptl/tst-attr3.c: Include <libc-diag.h>.
(do_test) [__GNUC_PREREQ (7, 0)]: Ignore -Wrestrict for two tests.
The test posix/tst-glob_symlinks.c fails to build with GCC mainline:
tst-glob_symlinks.c: In function 'do_test':
tst-glob_symlinks.c:124:30: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf (buf, sizeof buf, "%s?", dangling_link);
^~~~~
tst-glob_symlinks.c:124:3: note: 'snprintf' output between 2 and 4097 bytes into a destination of size 4096
snprintf (buf, sizeof buf, "%s?", dangling_link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tst-glob_symlinks.c:128:30: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf (buf, sizeof buf, "%s*", dangling_link);
^~~~~
tst-glob_symlinks.c:128:3: note: 'snprintf' output between 2 and 4097 bytes into a destination of size 4096
snprintf (buf, sizeof buf, "%s*", dangling_link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the test to avoid such truncation warnings by
increasing the buffer in question by one byte, to ensure it can hold
any possible result of %s? or %s* formats where %s comes from a buffer
of size PATH_MAX.
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* posix/tst-glob_symlinks.c (do_test): Increase size of buf.
Some strncat tests fail to build with GCC 8 because of -Warray-bounds
warnings. These tests are deliberately test over-large size arguments
passed to strncat, and already disable -Wstringop-overflow warnings,
but now the warnings for these tests come under -Warray-bounds so that
option needs disabling for them as well, which this patch does (with
an update on the comments; the DIAG_IGNORE_NEEDS_COMMENT call for
-Warray-bounds doesn't need to be conditional itself, because that
option is supported by all versions of GCC that can build glibc).
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* string/tester.c (test_strncat): Also disable -Warray-bounds
warnings for two tests.
After --enable-static-pie is added to configure, libc_cv_pie_default is
set to yes when either --enable-static-pie is used to configure glibc
or GCC defaults to PIE. We should set no-pie-ldflag to -no-pie, which
is supported on GCC 6 and later, only if GCC defaults to PIE, not when
--enable-static-pie is used to configure glibc.
Tested on x32 with --enable-static-pie using GCC 5 and without
--enable-static-pie using GCC 7.
[BZ #22614]
* Makeconfig (no-pie-ldflag): Set to -no-pie only if
$(cc-pie-default) == yes.
* config.make.in (cc-pie-default): New.
* configure.ac (libc_cv_pie_default): Renamed to ...
(libc_cv_cc_pie_default): This.
(libc_cv_pie_default): Set to $libc_cv_cc_pie_default.
* configure: Regenerated.
GLRO (_rtld_global_ro) is read-only after initialization and can
therefore not be patched at run time, unlike the hook table addresses
and their contents, so this is a desirable hardening feature.
The hooks are only needed if ld.so has not been initialized, and this
happens only after static dlopen (dlmopen uses a single ld.so object
across all namespaces).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Current GCC mainline detects that nscd calls readlink with the same
buffer for both input and output, which is not valid (those arguments
are both restrict-qualified in POSIX). This patch makes it use a
separate buffer for readlink's input (with a size that is sufficient
to avoid truncation, so there should be no problems with warnings
about possible truncation, though not strictly minimal, but much
smaller than the buffer for output) to avoid this problem.
Tested compilation for aarch64-linux-gnu with build-many-glibcs.py.
[BZ #22446]
* nscd/connections.c (handle_request) [SO_PEERCRED]: Use separate
buffers for readlink input and output.
Similar to commit 1ab47db00dfbc0128119e3503d3ed640ffc4830b
("mips64: fix clobbering s0 in setjmp() [BZ #22624]")
as sysdeps/mips/setjmp_aux.c is almost an identical copy
of sysdeps/mips/mips64/setjmp_aux.c.
[BZ #22624]
* sysdeps/mips/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
When configured as --enable-stack-protector=all glibc
inserts stack checking canary into every function
including __sigsetjmp_aux(). Stack checking code
ends up using s0 register to temporary hold address
of global canary value.
Unfortunately __sigsetjmp_aux assumes no caller' caller-save
registers should be clobbered as it stores them as-is.
The fix is to disable stack protection of __sigsetjmp_aux.
Tested on the following test:
#include <setjmp.h>
#include <stdio.h>
int main() {
jmp_buf jb;
volatile register long s0 asm ("$s0");
s0 = 1234;
if (setjmp(jb) == 0)
longjmp(jb, 1);
printf ("$s0 = %lu\n", s0);
}
Without the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1082346228
With the fix:
$ qemu-mipsn32 -L . ./mips-longjmp-bug
$s0 = 1234
[BZ #22624]
* sysdeps/mips/mips64/setjmp_aux.c (__sigsetjmp_aux): Use
inhibit_stack_protector.
Starting with commit
glibc-2.18.90-470-g2a939a7e6d81f109d49306bc2e10b4ac9ceed8f9 that
introduced substitution of dynamic string tokens in fillin_rpath,
_dl_init_paths invokes _dl_dst_substitute for $LD_LIBRARY_PATH twice:
the first time it's called directly, the second time the result
is passed on to fillin_rpath which calls expand_dynamic_string_token
which in turn calls _dl_dst_substitute, leading to the following
behaviour:
$ mkdir -p /tmp/'$ORIGIN' && cd /tmp/'$ORIGIN' &&
echo 'int main(){}' |gcc -xc - &&
strace -qq -E LD_LIBRARY_PATH='$ORIGIN' -e /open ./a.out
open("/tmp//tmp/$ORIGIN/tls/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/tls/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/tmp//tmp/$ORIGIN/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
Fix this by removing the direct _dl_dst_substitute invocation.
* elf/dl-load.c (_dl_init_paths): Remove _dl_dst_substitute preparatory
code and invocation.
There are three flavors of the crt startup code:
1) crt1.o used for non-pie,
2) Scrt1.o used for dynamic linked pie (dynamic linker relocates),
3) rcrt1.o used for static linked pie (self relocation is needed)
In the --enable-static-pie case crt1.o is built with -DPIC and in case
of static linking it interposes _dl_relocate_static_pie in libc to
avoid self relocation.
Scrt1.o is built with -DPIC -DSHARED and it relies on GOT entries that
the static linker cannot relax and thus need relocation before the
start code is executed, so rcrt1.o needs separate implementation.
This implementation does not work for .text > 4G position independent
executables, which is fine since the toolchain does not support
-mcmodel=large with -fPIE.
Tests pass with ld/22269 and ld/22263 binutils bugs fixed.
* sysdeps/aarch64/start.S (_start): Handle PIC && !SHARED case.
ldconfig supports `include' directives and use the glob function to
process them. The glob function sort entries according to the LC_COLLATE
category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry
in /etc/ld.so.conf, the order therefore depends on the locale used to
run ldconfig. A few examples of locale specific order that might be
disturbing in that context compared to the C locale:
- The cs_CZ and sk_SK locales sort the digits after the letters.
- The et_EE locale sorts the 'z' between 's' and 't'.
This patch fixes that by setting LC_COLLATE to C in order to process
files in deterministic order, independently of the locale used to launch
ldconfig.
NOTE: This should NOT be backported to older release branches.
Changelog:
[BZ #22505]
* elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
The test tst-leaks1 exercises calling dlopen with a $ORIGIN DST.
This results in a theoretical leak e.g.
Memory not freed:
-----------------
Address Size Caller
0x0000000001d766c0 0x21 at 0x7fb1bd8bf4ab
Or as seen via valgrind:
==27582== 33 bytes in 1 blocks are still reachable in loss record 1 of 1
==27582== at 0x4C2CB6B: malloc (vg_replace_malloc.c:299)
==27582== by 0x40124AA: _dl_get_origin (dl-origin.c:50)
==27582== by 0x4007DB9: expand_dynamic_string_token (dl-load.c:382)
==27582== by 0x400899C: _dl_map_object (dl-load.c:2160)
==27582== by 0x4013020: dl_open_worker (dl-open.c:224)
==27582== by 0x5166F9B: _dl_catch_exception (dl-error-skeleton.c:198)
==27582== by 0x4012BD9: _dl_open (dl-open.c:594)
==27582== by 0x4E39EF5: dlopen_doit (dlopen.c:66)
==27582== by 0x5166F9B: _dl_catch_exception (dl-error-skeleton.c:198)
==27582== by 0x516700E: _dl_catch_error (dl-error-skeleton.c:217)
==27582== by 0x4E3A514: _dlerror_run (dlerror.c:162)
==27582== by 0x4E39F70: dlopen@@GLIBC_2.2.5 (dlopen.c:87)
There is no real leak.
The calling link map (the executable's link map) has it's l_origin
expanded for future use as part of _dl_get_origin, and that results
in the main executable link map having a N-byte allocation for
l->l_origin that is never freed since the executable's link map is
just a part of the process.
To take this into account we do one dlopen with $ORIGIN before
calling mtrace to force the initialization of the executable link
map.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
Three tests fail with a read-only source directory because they try to
write into the source directory. None of these write into it in a way
that should actually be problematic for concurrent builds sharing the
same writable source directory, but avoiding any writing into the
source directory (from testing, or from building glibc if the source
timestamps are properly ordered) is still a good idea, as being able
to build with read-only sources helps make sure there isn't anything
that could cause problems for concurrent builds.
This patch changes the tests in question to use either /tmp or the
build directory to write their temporary files (or to test O_TMPFILE,
as applicable).
Tested for x86_64.
* io/Makefile (tst-open-tmpfile-ARGS): New variable.
* posix/tst-mmap-offset.c (fname): Use /tmp.
* stdlib/tst-setcontext3.sh (tempfile): Use ${objpfx}.
The conventional configure triplet for ARM GNU/Linux with hard-float
ABI is arm-*-linux-gnueabihf. However, GCC does not automatically use
the hard-float ABI based on that triplet. This patch fixes
build-many-glibcs.py to pass --with-float=hard so that the
arm-linux-gnueabihf configurations actually build with the intended
ABI.
Tested building the affected configurations with build-many-glibcs.py.
* scripts/build-many-glibcs.py (Context.add_all_configs): Use
--with-float=hard for arm-linux-gnueabihf configurations.
Building and installing glibc leaves .mo files (compiled message
translations) behind in the source directory. Building those files in
the source directory may once have made sense, if they were included
in release tarballs; now that release tarballs are just the output of
"git archive", building any non-checked-in files in the source
directory does not make sense. This patch changes these files to be
built in the build directory instead. The realclean rule is changed
to simply adding the .mo files to the "generated" variable, since once
the files are in the build directory it make no sense to exclude them
from normal cleanup rules.
This is necessary but not sufficient to avoid build-many-glibcs.py
needing to copy the glibc source directory. Its list of files to
touch on checkout to avoid subsequent regeneration (configure,
preconfigure, *-kw.h) is incomplete (missing at least INSTALL,
sysdeps/gnu/errlist.c, posix/testcases.h, posix/ptestcases.h,
locale/C-translit.h, (only regenerated for Hurd builds)
sysdeps/mach/hurd/bits/errno.h, (only regenerated for 32-bit SPARC
builds) sysdeps/sparc/sparc32/{sdiv,udiv,rem,urem}.S) - the existing
list may be sufficient to prevent regeneration that actually changes
the file contents depending on the installed build tools, but not to
ensure there is no regeneration at all - and there might well be other
things writing into the source directory in the course of building and
testing (so needing appropriate testing with read-only source
directories with different timestamp orderings to find and eliminate
all such cases).
Tested for x86_64.
[BZ #14121]
* po/Makefile (generated): Add $(ALL_LINGUAS:%=%.mo).
(%.mo): Change to $(objpfx)%.mo. Use $(make-target-directory).
($(mo-installed)): Use $(objpfx)%.mo.
(realclean): Remove rule.
po/Makefile has both old code for copying .po files from a shared
directory /com/share/ftp/gnu/po/maint/glibc (presumably once present
on some GNU server), and new code for downloading them from the
Translation Project. This patch removes the old code, leading only
the new code.
Tested for x86_64.
* po/Makefile (linguas): Remove rule and dependencies.
(linguas.mo): Likewise.
(.PHONY): Do not depend on linguas and linguas.mo.
(podir): Remove variable.
(pofiles): Likewise.
[$(pofiles)] (%.po): Remove rule.
While working on another patch I noticed that (a)
sysdeps/sparc/sparc32/Makefile is the only place with special
realclean settings, apart from po/, and (b) the generated files with a
rule in that Makefile to generate them (using m4) had been patched
manually so no longer corresponded with the output of the generator -
so if the timestamps were wrong, a build would result in changes to
the files in the source directory. (They also didn't correspond
because of changes in make 3.81 to how make handles whitespace at the
start of a line in a sequence of backslash-newline continuation lines
within a recipe.)
This patch fixes the generation and output files to match. The issue
with make and whitespace at start of continuation lines is fixed by
putting those newlines outside of arguments to echo, so the number of
spaces in the argument matches the number in the existing generated
files. Then divrem.m4 is changed to avoid generating whitespace-only
lines (my fix to the outputs from 2013; this fix to the generator also
changes the indentation of a label in the output files) and to
generate an alias in udiv.S (Adhemerval's fix from March).
build-many-glibcs.py doesn't have a non-v9 SPARC configuration,
because non-v9 32-bit SPARC didn't build when I set up
build-many-glibcs.py but sparcv9 did build. Whether or not non-v9
32-bit SPARC now builds (or indeed whether or not support for it is
obsolete), I tested by removing the sparcv8 and sparcv9 versions of
the four files in question, so forcing the generated files to be built
and used, and the compilation parts of the glibc testsuite passed.
* sysdeps/sparc/sparc32/Makefile
($(divrem:%=$(sysdep_dir)/sparc/sparc32/%.S)): Do not include
start-of-line whitespace in argument of echo.
* sysdeps/sparc/sparc32/divrem.m4: Avoid generating lines starting
with whitespace. Generate __wrap_.udiv alias.
* sysdeps/sparc/sparc32/rem.S: Regenerated.
* sysdeps/sparc/sparc32/sdiv.S: Likewise.
* sysdeps/sparc/sparc32/udiv.S: Likewise.
* sysdeps/sparc/sparc32/urem.S: Likewise.
This patch makes use of vectors for aligned inputs. Improvements
upto 30% seen for larger aligned inputs.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
SXID_ERASE is implicit for all environment variables. Avoid
mentioning it in the tunables list; that way only the ones with
SXID_IGNORE remain prominent and mentioned. TODO: we need to audit
each of those cases and drop them to SXID_ERASE wherever possible.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memset also apply to bzero as they share code.
For memset/bzero, performance comparison with niagara4 code:
For memset nonzero data,
256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache)
1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache)
For memset zero data (and bzero),
256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache)
1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memset-niagara7.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New
file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR):
Add niagara7 option.
* NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and
memset.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memcpy also apply to mempcpy and memmove
where they share code. Optimizations for memset also apply
to bzero as they share code.
For memcpy/mempcpy/memmove, performance comparison with niagara4 code:
Long word aligned data
0-127 bytes - minimal changes
128-1023 bytes - 7-30% gain
1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache)
Word aligned data
0-127 bytes - 50%+ gain
128-1023 bytes - 10-200% gain
1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache)
Unaligned data
0-127 bytes - 0-70%+ gain
128-447 bytes - 40-80%+ gain
448-511 bytes - 1-3% loss
512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache)
4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7,
and __memmove_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR):
Add niagara7 option.
* sysdeps/sparc/sparc64/multiarch/memmove.c: New file.
* sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and
multi-arch configurations.
* sysdeps/sparc/sparc32/sparcv9/memmove.S: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/memmove.S: Likewise.
* sysdeps/sparc/sparc64/rtld-memmove.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds support for the ADP (also known as adi) hardware
capability, as reported by the kernel sparc port when running on M7
machines.
Tested in both sparcv9-*-* and sparc64-*-* targets.
* sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined.
* sysdeps/sparc/dl-procinfo.c: Added "adp" to the
_dl_sparc_cap_flags array.
* sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace the simple byte-wise compare in the misaligned case with a
dword compare with page boundary checks in place. For simplicity I've
chosen a 4K page boundary so that we don't have to query the actual
page size on the system.
This results in up to 3x improvement in performance in the unaligned
case on falkor and about 2.5x improvement on mustang as measured using
bench-strcmp.
* sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a
time whenever possible.
A glibc master build with --enable-nss-crypt using the NSS
crypto libraries fails during make check with the following error:
<command-line>:0:0: error: "USE_CRYPT" redefined [-Werror]
<command-line>:0:0: note: this is the location of the previous
definition
This is caused by commit 36975e8e7e
by H.J. Lu which replaces all = with +=. The fix is to undefine
USE_CRYPT before defining it to zero.
Committed as an obvious fix. Fixes the build issue on x86_64 with
no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
Some libio operations fail to correctly free the backup area (created
by _IO_{w}default_pbackfail on unget{w}c) resulting in either invalid
buffer free operations or memory leaks.
For instance, on the example provided by BZ#22415 a following
fputc after a fseek to rewind the stream issues an invalid free on
the buffer. It is because although _IO_file_overflow correctly
(from fputc) correctly calls _IO_free_backup_area, the
_IO_new_file_seekoff (called by fseek) updates the FILE internal
pointers without first free the backup area (resulting in invalid
values in the internal pointers).
The wide version also shows an issue, but instead of accessing invalid
pointers it leaks the backup memory on fseek/fputwc operation.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* libio/Makefile (tests): Add tst-bz22415.
(tst-bz22415-ENV): New rule.
(generated): Add tst-bz22415.mtrace and tst-bz22415.check.
(tests-special): Add tst-bz22415-mem.out.
($(objpfx)tst-bz22415-mem.out): New rule.
* libio/fileops.c (_IO_new_file_seekoff): Call _IO_free_backup_area
in case of a successful seek operation.
* libio/wfileops.c (_IO_wfile_seekoff): Likewise.
(_IO_wfile_overflow): Call _IO_free_wbackup_area in case a write
buffer is required.
* libio/tst-bz22415.c: New test.
When running strace, IPC_64 was set in the command, but ia64 is
an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set
in the kernel, so ipc_parse_version just returns IPC_64 without
clearing the IPC_64 bit in the command.
* sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining
__IPC_64 to 0 to avoid IPC_64 being set.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
These functions set errno and thus the const attribute was wrong.
[BZ #22593]
* math/bits/mathcalls.h (nextafter): Remove const.
(nexttoward): Likewise.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
The same logic used in s_cosf.S version for x86 and powerpc
is used to create a generic s_cosf.c, so there is no performance
improvement in x86_64 and powerpc64.
* sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame
is created as there is no CFI rule for r15. This is also observeable in
GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?)
Therefore this patch is now storing r15 on stack and is using cfi_offset rule.
The stmg/lmg instruction is used to store/load r14 and r15 with one instruction.
On 64bit, the offsets of the fprs have moved to store r15 directly after r14.
On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space
wasn't used.
ChangeLog:
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve):
Store r15 on stack and add cfi rule.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Likewise.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
As per C11 DR#471, ctanh (0 + i NaN) and ctanh (0 + i Inf) should
return 0 + i NaN (with "invalid" exception in the second case but not
the first), not NaN + i NaN. This has corresponding implications for
ctan since its special cases are defined by ctan (z) = -i ctanh (iz).
This patch implements these cases for ctanh and ctan, updating
tests accordingly.
Tested for x86_64.
[BZ #22568]
* math/s_ctan_template.c (M_DECL_FUNC (__ctan)): Set imaginary
part of result to imaginary part of argument if it is zero and the
real part of the argument is not finite.
* math/s_ctanh_template.c (M_DECL_FUNC (__ctanh)): Set real part
of result to real part of argument if it is zero and the imaginary
part of the argument is not finite.
[BZ #22524]
* localedata/Makefile: Add lt_LT.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/lt_LT.UTF-8.in: New file for testing the collation.
* localedata/locales/lt_LT (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
This patch adds support for defining strtof32, wcstof32, strtof32_l
and wcstof32_l functions as aliases of the corresponding float
functions when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strtof.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* stdlib/strtof_l.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32_l): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32_l): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
This patch adds support for defining strfromf32 as an alias of
strfromf when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strfromf.c: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strfromf32): Define
and later undefine as macro and define as weak alias.
This patch adds the header required for testing _Float32 function
aliases, using float ulps. The corresponding makefile support will be
included in the main patch that enables those aliases.
In conjunction with other _Float32 changes, tested for x86_64 and with
build-many-glibcs.py.
* math/test-float32.h: New file.
This patch makes the libm_alias_float macro support creating _Float32
aliases, in preparation for enabling glibc support for that type.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* sysdeps/generic/libm-alias-float.h: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32]
(libm_alias_float_other_r): Create f32 alias.
(libm_alias_float_r): Use semicolon before call to
libm_alias_float_other_r.
This patch corrects three ia64 libm_alias_float_other calls so they
generate the intended _Float32 aliases when such aliases are enabled.
Tested with build-many-glibcs.py for ia64-linux-gnu (that installed
stripped shared libraries are unchanged when applied to current
sources, and that this enables compilation tests to pass when used in
conjunction with other _Float32 patches).
* sysdeps/ia64/fpu/e_exp2f.S (__exp2f): Use exp2 not __exp2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_log2f.S (__log2f): Use log2 not __log2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_powf.S (__powf): Use pow not __pow as second
argument to libm_alias_float_other.
As per C11 DR#471 (adjusted resolution accepted for C17), cacosh (0 +
iNaN) should return NaN +/- i pi/2, not NaN + iNaN.
This patch fixes the code accordingly. The test has hardcoded the
result with positive sign of the imaginary part (with an associated
comment), since the unspecified sign for a result other than 0 or
infinity isn't currently supported by the test infrastructure.
Tested for x86_64.
[BZ #22561]
* math/s_cacosh_template.c (M_DECL_FUNC (__cacosh)): Use pi/2 for
real part of result for argument 0 + i * NaN.
* math/libm-test-cacosh.inc (cacosh_test_data): Update expected
results for tests of 0 + i * NaN.
The ldbl-96 implementation of j1l has some function-local variables
that are declared static for no apparent reason (this dates back to
the first addition of that file).
Any vaguely recent compiler, probably including any that are supported
for building glibc, optimizes away the "static" here, as the values of
the variables on entry to the function are dead. So there is not
actually a user-visible bug here at present (but with any compilers
that didn't optimize away the static at all, possibly building with
less or no optimization, so that the function stored intermediate
values to and then loaded them from the variables, there would have
been a thread-safety issue). But the "static" clearly doesn't belong
there and might potentially make things unsafe were compilation
without optimization to be supported in future, so this patch removes
it.
Tested for x86_64.
* sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local
variables static.
I noticed that an x86_64 build of libm unexpectedly contained more
non-constant data than an older version (before _Float128 support)
did. The problem is non-const arrays in the ldbl-128 j0l and j1l
implementations; this patch makes those arrays, and the corresponding
ldbl-128ibm ones, const.
Tested for x86_64, and tested compilation for powerpc with
build-many-glibcs.py.
* sysdeps/ieee754/ldbl-128/e_j0l.c (Y0_2N): Make const.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
[BZ #22515]
* localedata/Makefile: Add hsb_DE.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/hsb_DE.UTF-8.in: New file for testing the collation.
* localedata/locales/hsb_DE (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
If double, long double and _Float64 all have the same set of values,
TS 18661-3 requires the usual arithmetic conversions on long double
and _Float64 to produce _Float64. For this to be the case when
building with a compiler without a distinct _Float64 type, _Float64
must be a typedef for long double, not for double. (_Float32x,
however, must be double in such a case, not long double, because the
usual arithmetic conversions on _Float32x and double must produce
double.)
This patch adjusts the fallback definition of _Float64 and associated
macros accordingly in that case, to fix the build of test-tgmath3 with
GCC 6 for such a configuration. Tested in conjunction with _Float64
changes with build-many-glibcs.py for arm-linux-gnueabi, to make sure
the issue with test-tgmath3 is fixed. Also tested for x86_64.
* bits/floatn-common.h: Include <bits/long-double.h>.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (__f64): Use suffix 'l'.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (__CFLOAT64): Use _Complex long double.
[__HAVE_FLOAT64 && (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __NO_LONG_DOUBLE_MATH] (_Float64): Use long double.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_huge_valf64): Use __builtin_huge_vall.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_inff64): Use __builtin_infl.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_nanf64): Use __builtin_nanl.
[__HAVE_FLOAT64 && !__GNUC_PREREQ (7, 0) && __NO_LONG_DOUBLE_MATH]
(__builtin_nansf64): Use __builtin_nansl.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch adds support for defining strtof64, strtof32x, wcstof64,
wcstof32x and the corresponding _l functions as aliases of the
corresponding double functions when _Float64 and _Float32x support is
enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strtod.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
* stdlib/strtod_l.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
This patch avoid an extra floating point to integer conversion in
reduced internal function for generic sinf by defining the sign as
double instead of integers.
There is no much difference on Haswell with GCC 7.2.1:
Before After
min 9.11 9.108
mean 21.982 21.9224
However H.J. Lu reported gains on Skylake:
Before:
"sinf": {
"": {
"duration": 3.4044e+10,
"iterations": 1.9942e+09,
"max": 141.106,
"min": 7.704,
"mean": 17.0715
}
}
After:
"sinf": {
"": {
"duration": 3.40665e+10,
"iterations": 2.03199e+09,
"max": 95.994,
"min": 7.704,
"mean": 16.765
}
}
Checked on x86_64-linux-gnu.
* sysdeps/ieee754/flt-32/s_sinf.c (ones): Define as double.
(reduced): Use ones as double instead of integer.
sinf(NAN) should not signal invalid fp exception
so use isless instead of < where NAN is compared.
this makes the sinf tests pass on aarch64.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Use isless.
This patch adds support for defining strfromf64 and strfromf32x
aliases of strfromd when the corresponding types are enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strfromd.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64] (strfromf64): Define
and later undefine as macro and define as weak alias.
[__HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X] (strfromf32x):
Likewise.
This patch adds the headers required for testing _Float64 and
_Float32x function aliases (using double ulps). The corresponding
makefile support will be included in the patch that actually adds
those aliases; there doesn't seem much point in adding makefile
conditionals for testing something that will be available
unconditionally.
In conjunction with other _Float64 / _Float32x changes, test for
x86_64 and with build-many-glibcs.py.
* math/test-float32x.h: New file.
* math/test-float64.h: Likewise.
This patch makes the libm_alias_double macros support creating
_Float64 and _Float32x aliases, in preparation for enabling glibc
support for those types.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* sysdeps/generic/libm-alias-double.h: Include <bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
(libm_alias_double_r): Use semicolon before call to
libm_alias_double_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Include
<bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
Since s_sinf.c either assigns the return value of floor to integer or
passes double converted from integer to floor, this patch replaces
floor with simple casts.
Also since long == int for 32-bit targets, we can use long instead of
int to avoid 64-bit integer for 64-bit targets.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 130.566 129.564 30%
min 7.704 7.706 0%
mean 21.8188 19.1363 30%
* sysdeps/ieee754/flt-32/s_sinf.c (reduced): Replace long with
int.
(SINF_FUNC): Likewise. Replace floor with simple casts.
[BZ #22517]
* localedata/Makefile: Add et_EE.UTF-8 to test-input
and to the list of locales to be built for testing.
* localedata/et_EE.UTF-8.in: New file for testing the collation.
* localedata/locales/et_EE (LC_COLLATE): Use “copy "iso14651_t1"”
and build the collation rules upon that.
Avoid an issue in gcc where some of the vector (aka SIMD) ops will
sometimes end up getting wrongly optimized out. We use these
instructions in many of the string implementations. If/when we
have an upstreamed fix for this problem in gcc we can conditionalize
the use of the extended assembly workaround in glibc.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fmaf.S: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf.c:
Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c:
Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf.c:
Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llroundf.c:
Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf.c:
Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrintf.c:
Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lroundf.c:
Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff.c:
Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c:
Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c:
Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
[BZ #22527]
* localedata/locales/tr_TR (LC_COLLATE): Base collation rules
on iso14651_t1. A test file localedata/tr_TR.UTF-8.in is already
available, this rewrite of the collation rules does reproduce
the test file in the same order.
