This is in preparation for changes in the dynamic linker so that
pread() is used instead of lseek()+read().
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Adds "make test" for re-running just one test. Also adds
"make help" for help with our Makefile targets, and adds a
mini-help when you just run "make".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.1 adds missing SySV IPC syscalls to the syscall table for
remanining one that still uses the ipc syscall on glibc (m68k, mips-o32,
powerpc, s390, sh, and sparc32). However the newly added direct ipc
syscall are different than the old ones:
1. They do not expect IPC_64, meaning __IPC_64 should be set to zero
when new syscalls are used. And new syscalls can not be used
for compat functions like __old_semctl (to emulated old sysvipc it
requires to use the old __NR_ipc syscall without __IPC_64).
Thus IPC_64 is redefined for newer kernels on affected ABIs.
2. semtimedop and semop does not exist on 32-bit ABIs (only
semtimedop_time64 is supplied). The provided syscall wrappers only
uses the wire-up syscall if __NR_semtimedop and __NR_semop are
also defined.
Checked on x86_64-linux-gnu and i686-linux-gnu on both a 4.15 kernel
configure with default options and sysvipc tests on a 5.3.0 kernel with
--enable-kernel=5.1.
Tested-by: Paul A. Clarke <pc@us.ibm.com>
All nptl targets have these signal definitions nowadays. This
changes also replaces the nptl-generic version of pthread_sigmask
with the Linux version.
Tested on x86_64-linux-gnu and i686-linux-gnu. Built with
build-many-glibcs.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Besides semop being a subset of semtimedop, new 32-bit architectures
on Linux are not expected to provide the syscall (only the 64-bit time
semtimedop).
Also, Linux 5.1 only wired-up semtimedop for the 64-bit architectures
that missed it (powerpc, s390, and sparc). This simplifies the code
to support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch refactor the internal sysvipc in two main points:
1. Add a new __ASSUME_SYSVIPC_DEFAULT_IPC_64 to infer the __IPC_64
value to be used along either the multiplexed __NR_ipc or wired-up
syscall. The defaut value assumed for __IPC_64 is also changed
from 0x100 to 0x0, aligning with Linux generic UAPI. The idea
is to simplify the Linux 5.1 wire-up for sysvipc syscalls for
some 32-bit ABIs (which expectes __IPC_64 being 0x0) and simplify
new ports (which will no longer need to add ipc_priv.h).
2. It also removes some duplicated internal definition used on compat
sysvipc symbols defined at ipc_priv.h (more specifically the
__old_ipc_perm, SEMCTL_ARG_ADDRESS, MSGRCV_ARGS, and
SEMTIMEDOP_IPC_ARGS). The idea is also to make it simpler to enable
the new wire-up sysvipc syscall provided by Linux v5.1.
There is no semantic change expected on any port. Checked with a build
against all affected ABIs.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
From the beginning, elf/tst-dlopen-aout has exercised two different
bugs: (a) failure to report errors for a dlopen of the executable
itself in some cases (bug 24900) and (b) incorrect rollback of the
TLS modid allocation in case of a dlopen failure (bug 16634).
This commit replaces the test with elf/tst-dlopen-self for (a) and
elf/tst-dlopen-tlsmodid for (b). The latter tests use the
elf/tst-dlopen-self binaries (or iconv) with dlopen, so they are
no longer self-dlopen tests.
Tested on x86_64-linux-gnu and i686-linux-gnu, with a toolchain that
does not default to PIE.
Linux 5.3 adds a PTRACE_GET_SYSCALL_INFO constant, with an associated
structure and PTRACE_SYSCALL_INFO_* constants.
This patch adds these to sys/ptrace.h in glibc
(PTRACE_GET_SYSCALL_INFO in each architecture version, the rest in
bits/ptrace-shared.h). As with previous such constants and associated
structures, the glibc version of the structure is named struct
__ptrace_syscall_info.
Tested for x86_64, and with build-many-glibcs.py.
The warning is confusing to those who do not understand the context,
and the warning is easy to misunderstand:
A reader needs to know that it was written by someone who is generally
skeptical of government influence and control, otherwise it reads as
an affirmation of the U.S. government's role as the ultimate editor of
the manual. This is precisely the opposite of what the warning
intends to convey. (Reportedly, it criticizes that several
U.S. administrations have tried to restrict the medical advice that
U.S.-funded health care workers can provide abroad, considering that
censorship.)
The warning is also misleading on a technical level. A reader who
makes the connection to pregnancy termination will get the wrong
impression that calling the abort function will terminate subprocesses
of the current process, but this is not what generally happens.
Finally, for both GNU and the FSF, it is inappropriate to use female
reproductive health as mere joke material, since these organizations
do not concern themselves with such issues otherwise, and the warning
is purportedly about something else entirely.
This reinstates commit 340d9652b9
("manual/startup.texi (Aborting a Program): Remove inappropriate
joke."), effectively reverting the revert in commit
ffa81c22a3 ("Revert:").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch sets the mode field in ipc_perm as mode_t for all architectures,
as POSIX specification [1]. The changes required are as follow:
1. It moves the ipc_perm definition out of ipc.h to its own header
ipc_perm.h. It also allows consolidate the IPC_* definition on
only one header.
2. The generic implementation follow the kernel ipc64_perm size so the
syscall can be made directly without temporary buffer copy. However,
since glibc defines the MODE field as mode_t, it omits the __PAD1 field
(since glibc does not export mode_t as 16-bit for any architecture).
It is a two-fold improvement:
2.1. New implementation which follow Linux UAPI will not need to
provide an arch-specific ipc-perm.h header neither wrongly
use the wrong 16-bit definition from previous default ipc.h
(as csky did).
2.1. It allows consolidate ipc_perm definition for architectures that
already provide mode_t as 32-bit.
3. All kernel ABIs for the supported architectures already provides the
expected padding for mode type extension to 32-bit. However, some
architectures the padding has the wrong placement, so it requires
the ipc control routines (msgctl, semctl, and shmctl) to adjust the
mode field accordingly. Currently they are armeb, microblaze, m68k,
s390, and sheb.
A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the
required ABIs define.
4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also
require compat symbols that do not adjust the mode field.
Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu,
and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu,
sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu.
I also did a sanity test against armeb qemu usermode for the sysvipc
tests.
[BZ #18231]
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file.
* sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T):
Define.
* sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
[!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment about
__ASSUME_SYSVIPC_BROKEN_MODE_T semantic.
* sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as
2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined.
(msgctl_syscall, __msgctl_mode16): New symbol.
(__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T.
* sysdeps/unix/sysv/linux/semctl.c: Likewise.
* sysdeps/unix/sysv/linux/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add
msgctl, semctl, and shmctl.
* sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise.
* conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t
mode for Hurd.
* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add
msgctl, semctl, and shmctl.
* sysdeps/unix/sysv/linux/arm/be/Versions: New file.
* sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise.
* sysdeps/unix/sysv/linux/sh/be/Versions: Likewise.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
This patch provides new __clock_settime64 explicit 64 bit function for
setting the time. Moreover, a 32 bit version - __clock_settime - has been
refactored to internally use __clock_settime64.
The __clock_settime is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit
struct timespec.
The new clock_settime64 syscall available from Linux 5.1+ has been used,
when applicable.
In this patch the internal padding (tv_pad) of struct __timespec64 is
left untouched (on systems with __WORDSIZE == 32) as Linux kernel ignores
upper 32 bits of tv_nsec.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_settime64) and glibc build with v5.1 as minimal
kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
__clock_settime64 syscalls.
- Linux v4.19 (no clock_settime64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support __clock_settime64 syscalls, so the fallback
to clock_settime is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
* include/time.h (__clock_settime64):
Add __clock_settime alias according to __TIMESIZE define
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime):
Refactor this function to be used only on 32 bit machines as a wrapper
on __clock_settime64.
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64): Add
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64):
Use clock_settime64 kernel syscall (available from 5.1+ Linux)
This patch replaces the fork+exec by posix_spawn on wordexp, which
allows a better scability on Linux and simplifies the thread
cancellation handling.
The only change which can not be implemented with posix_spawn the
/dev/null check to certify it is indeed the expected device. I am
not sure how effetive this check is since /dev/null tampering means
something very wrong with the system and this is the least of the
issues. My view is the tests is really out of the place and the
hardening provided is minimum.
If the idea is still to provide such check, I think a possibilty
would be to open /dev/null, check it, add a dup2 file action, and
close the file descriptor.
Checked on powerpc64le-linux-gnu and x86_64-linux-gnu.
* include/spawn.h (__posix_spawn_file_actions_addopen): New
prototype.
* posix/spawn_faction_addopen.c (posix_spawn_file_actions_addopen):
Add internal alias.
* posix/wordexp.c (create_environment, free_environment): New
functions.
(exec_comm_child, exec_comm): Use posix_spawn instead of fork+exec.
* posix/wordexp-test.c: Use libsupport.
This patch changes how the fallback getdents64 implementation calls
non-LFS getdents by replacing the scratch_buffer with static buffer
plus a loop on getdents calls. This avoids the potential malloc
call on scratch_buffer_set_array_size for large input buffer size
at the cost of more getdents syscalls.
It also adds a small optimization for older kernels, where the first
ENOSYS failure for getdents64 disable subsequent calls.
Check the dirent tests on a mips64-linux-gnu with getdents64 code
disabled.
* sysdeps/unix/sysv/linux/mips/mips64/getdents64.c (__getdents64):
Add small optimization for older kernel to avoid issuing
__NR_getdents64 on each call and replace scratch_buffer usage with
a static allocated buffer.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Originally the public interface for getdents64 was declared in
<unistd.h> in 51ea67d548. Later, b8b3d5a14e moved it to <dirent.h>.
Fixes: b8b3d5a14e ("Linux: Move getdents64 to <dirent.h>")
Building the test cases in parallel might make tst-strftime2 and
tst-strftime3 fail. Simply re-running the test case (or building
serially) makes the problem go away. This patch adds the necessary
dependency to allow parallel builds in the time subdirectory.
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Once wordexp switches to posix_spawn, testing for command execution
based on fork handlers will not work anymore. Therefore, move these
subtests into a new test, posix/tst-wordexp-nocmd, which uses a
different form of command execution detection, based on PID
namespaces.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_var_init is used to patch the read-only data section after
relocation. Several architectures use this to update
GLRO(page_size) with the correct value for the static dlopen case,
where _rtld_global_ro has not been initialized by the dynamic
loader.
RISC-V does not need this. The RISC-V Instruction Set Manual,
Volume II: Privileged Architecture, Document Version
20190608-Priv-MSU-Ratified says this:
After much deliberation, we have settled on a conventional
page size of 4 KiB for both RV32 and RV64. We expect this
decision to ease the porting of low-level runtime software
and device drivers. The TLB reach problem is ameliorated by
transparent superpage support in modern operating systems
[2]. Additionally, multi-level TLB hierarchies are quite
inexpensive relative to the multi-level cache hierarchies
whose address space they map.
[2] Juan Navarro, Sitaram Iyer, Peter Druschel, and
Alan Cox. Practical, transparent operating system support
for superpages. SIGOPS Oper. Syst. Rev., 36(SI):89–104,
December 2002.
This means that the initialization of
_rtld_global_ro._dl_page_size in elf/rtld.c with EXEC_PAGESIZE
is sufficient for RISC-V.
Commit a42faf59d6 ("Fix BZ #16634.")
attempted to fix a TLS modid consistency issue by adding additional
checks to the open_verify function. However, this is fragile
because open_verify cannot reliably predict whether
_dl_map_object_from_fd will later fail in the more complex cases
(such as memory allocation failures). Therefore, this commit
assigns the TLS modid as late as possible. At that point, the link
map pointer will eventually be passed to _dl_close, which will undo
the TLS modid assignment.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
If the loader is invoked explicitly and loads the main executable,
it stores the file ID of the main executable in l_file_id. This
information is not available if the main excutable is loaded by the
kernel, so this is another case where the two cases differ.
This enhances commit 23d2e5faf0
("elf: Self-dlopen failure with explict loader invocation
[BZ #24900]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
To work around <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91691>
for RV32, we recently disabled -Wmaybe-uninitialized for some inline
functions in inet/net-internal.h, as included by sunrpc/clnt_udp.c.
The same error has now appeared with current GCC trunk for MIPS, in a
form that is located at the definition of the variable in question and
so unaffected by the disabling in inet/net-internal.h. Thus, this
patch adds the same disabling around the definition of that variable,
to cover the MIPS case.
Tested with build-many-glibcs.py (compilers and glibcs stages) for
mips64-linux-gnu with GCC mainline.
* sunrpc/clnt_udp.c: Include <libc-diag.h>.
(clntudp_call): Disable -Wmaybe-uninitialized around declaration
of total_deadline.
Commit 69fd157a3 "time: Add padding for the timespec if required"
caused a breakage in the glibc tests as the endian.h include file was
kept in the networking headers while the __USE_MISC #ifdefs had been
removed. This resulted in namespace violations in the networking
headers.
This patche restores the __USE_MISC conditionals in endian.h to fix the
test failures.
* string/endian.h: Restore the __USE_MISC conditionals.
string/tester.c contains code that correctly triggers various GCC
warnings about dubious uses of string functions (uses that are being
deliberately tested there), and duly disables those warnings around
the relevant code.
A change in GCC mainline resulted in this code failing to compile with
a -Warray-bounds error, despite the location with the error having
-Warray-bounds already disabled. This has been reported as
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91890>. This patch
avoids that problem and possible future issues with these diagnostics
by moving all the warning disabling in this file to top level, as
suggested by Florian in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00033.html>, rather
than only doing it locally around specific function calls.
Tested with build-many-glibcs.py for aarch64-linux-gnu with GCC
mainline (with only the conform/ failures noted in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00043.html>).
* string/tester.c: Ignore -Warray-bounds and
-Wmemset-transposed-args at top level.
[__GNUC_PREREQ (7, 0)]: Ignore -Wrestrict and -Wstringop-overflow=
at top level.
[__GNUC_PREREQ (8, 0)]: Ignore -Wstringop-truncation at top level.
(test_stpncpy): Do not ignore warnings here.
(test_strncat): Likewise.
(test_strncpy): Likewise.
(test_memset): Likewise.
The HURD requires explicit inclusion of <bits/types/struct_timeval.h> to use
struct timeval in ./include/time.h.
For this particular glibc port, the proper header hasn't been included before
inclusion of time.h.
Tested with build-many-glibcs.py with i686-gnu and x86_64-linux-gnu:
build-many-glibcs.py /home/lukma/work/glibc/glibc-many-build --keep all compilers i686-gnu
build-many-glibcs.py /home/lukma/work/glibc/glibc-many-build --keep all glibcs i686-gnu
Also run of xcheck on x86_64:
./src/configure --prefix=/usr
make PARALLELMFLAGS="-j12" && make xcheck PARALLELMFLAGS="-j12"
* include/time.h: Add #include <bits/types/struct_timeval.h>
Since at least POWER8, there is no performance advantage to entering
"Ignore Exceptions Mode", and doing so conditionally requires
- the conditional logic, and
- a system call.
Make it a no-op for uses within glibc.
This patch adds the ability to run debugglibc.sh's inferior program with
arguments specified on the command line. This enables convenient debugging
of non-testcase programs such as iconv/iconv_prog or other dynamically
linked programs. Program arguments may be passed using `--' as a separator.
For example:
$ ./debugglibc.sh -b iconv -- iconv/iconv_prog -f ASCII -t UTF-8 input.txt
If we are running on a 32-bit system with a 64-bit time_t we need to
ensure there is padding around the tv_nsec variable. This is requried as
the timespec is #defined to the __timespec64 struct.
* time/bits/types/struct_timespec.h: Add padding for the timespec if
required.
With only two exceptions (sys/types.h and sys/param.h, both of which
historically might have defined BYTE_ORDER) the public headers that
include <endian.h> only want to be able to test __BYTE_ORDER against
__*_ENDIAN.
This patch creates a new bits/endian.h that can be included by any
header that wants to be able to test __BYTE_ORDER and/or
__FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs
__LONG_LONG_PAIR. It only defines macros in the implementation
namespace.
The existing bits/endian.h (which could not be included independently
of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER)
is renamed to bits/endianness.h. I also took the opportunity to
canonicalize the form of this header, which we are stuck with having
one copy of per architecture. Since they are so short, this means git
doesn’t understand that they were renamed from existing headers, sigh.
endian.h itself is a nonstandard header and its only remaining use
from a standard header is guarded by __USE_MISC, so I dropped the
__USE_MISC conditionals from around all of the public-namespace things
it defines. (This means, an application that requests strict library
conformance but includes endian.h will still see the definition of
BYTE_ORDER.)
A few changes to specific bits/endian(ness).h variants deserve
mention:
- sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to
sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did
have selectable endianness, but we have assembly code in
sysdeps/ia64 that assumes it’s little-endian, so there is no reason
to treat the ia64 endianness.h as linux-specific.
- The C-SKY port does not fully support big-endian mode, the compile
will error out if __CSKYBE__ is defined.
- The PowerPC port had extra logic in its bits/endian.h to detect a
broken compiler, which strikes me as unnecessary, so I removed it.
- The only files that defined __FLOAT_WORD_ORDER always defined it to
the same value as __BYTE_ORDER, so I removed those definitions.
The SH bits/endian(ness).h had comments inconsistent with the
actual setting of __FLOAT_WORD_ORDER, which I also removed.
- I *removed* copyright boilerplate from the few bits/endian(ness).h
headers that had it; these files record a single fact in a fashion
dictated by an external spec, so I do not think they are copyrightable.
As long as I was changing every copy of ieee754.h in the tree, I
noticed that only the MIPS variant includes float.h, because it uses
LDBL_MANT_DIG to decide among three different versions of
ieee854_long_double. This patch makes it not include float.h when
GCC’s intrinsic __LDBL_MANT_DIG__ is available.
* string/endian.h: Unconditionally define LITTLE_ENDIAN,
BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping
macros only on !__ASSEMBLER__. Move the definitions of
__BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER,
and __LONG_LONG_PAIR to...
* string/bits/endian.h: ...this new file, which includes
the renamed header bits/endianness.h for the definition of
__BYTE_ORDER and possibly __FLOAT_WORD_ORDER.
* string/Makefile: Install bits/endianness.h.
* include/bits/endian.h: New wrapper.
* bits/endian.h: Rename to bits/endianness.h.
Add multiple-include guard. Rewrite the comment explaining what
the machine-specific variants of this file should do.
* sysdeps/unix/sysv/linux/ia64/bits/endian.h:
Move to sysdeps/ia64.
* sysdeps/aarch64/bits/endian.h
* sysdeps/alpha/bits/endian.h
* sysdeps/arm/bits/endian.h
* sysdeps/csky/bits/endian.h
* sysdeps/hppa/bits/endian.h
* sysdeps/ia64/bits/endian.h
* sysdeps/m68k/bits/endian.h
* sysdeps/microblaze/bits/endian.h
* sysdeps/mips/bits/endian.h
* sysdeps/nios2/bits/endian.h
* sysdeps/powerpc/bits/endian.h
* sysdeps/riscv/bits/endian.h
* sysdeps/s390/bits/endian.h
* sysdeps/sh/bits/endian.h
* sysdeps/sparc/bits/endian.h
* sysdeps/x86/bits/endian.h:
Rename to endianness.h; canonicalize form of file; remove
redundant definitions of __FLOAT_WORD_ORDER.
* sysdeps/powerpc/bits/endianness.h: Remove logic to check for
broken compilers.
* ctype/ctype.h
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h
* sysdeps/ia64/ieee754.h
* sysdeps/ieee754/ieee754.h
* sysdeps/ieee754/ldbl-128/ieee754.h
* sysdeps/ieee754/ldbl-128ibm/ieee754.h
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
* sysdeps/mips/ieee754/ieee754.h
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
* sysdeps/nptl/pthread.h
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
* sysdeps/sparc/sparc32/ieee754.h
* sysdeps/unix/sysv/linux/generic/bits/stat.h
* sysdeps/unix/sysv/linux/generic/bits/statfs.h
* sysdeps/unix/sysv/linux/sys/acct.h
* wctype/bits/wctype-wchar.h:
Include bits/endian.h, not endian.h.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h.
* sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__
in ifdefs, instead of LDBL_MANT_DIG. Only include float.h
when __LDBL_MANT_DIG__ is not predefined, in which case
define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
Sync these values with CLDR and langtable as much as possible. Add
missing values.
If possible, take the values from CLDR, if CLDR does not have it,
take it from langtable. The values from langtable which are not from
CLDR are from Wikipedia or native speakers.
This patch makes build-many-glibcs.py default to binutils 2.33 branch.
Tested with build-many-glibcs.py (compilers and glibcs builds).
* scripts/build-many-glibcs.py (Context.checkout): Default
binutils version to 2.33 branch.
Those functions allow easy conversion between Y2038 safe struct
__timespec64 and other time related data structures (like struct timeval
or struct timespec).
* include/time.h (valid_timeval_to_timespec64): Add.
* include/time.h (valid_timespec_to_timespec64): Likewise.
* include/time.h (valid_timespec64_to_timespec): Likewise.
* include/time.h (valid_timespec64_to_timeval): Likewise.
The Linux 5.3 uapi headers have some rearrangement relating to MAP_*
constants, which includes the effect of adding definitions of MAP_SYNC
on powerpc and sparc. This patch updates the corresponding glibc
bits/mman.h headers accordingly, and updates the Linux kernel version
number in tst-mman-consts.py to reflect that these constants are now
current with that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC]
(MAP_SYNC): New macro.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC]
(MAP_SYNC): Likewise.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.3.
This patch adds a new make rule that generates a helper script for
debugging glibc test cases. The new script, debugglibc.sh, is similar
to testrun.sh, in the sense that it allows the execution of the
specified test case, however, it opens the test case in GDB, setting the
library path the same way that testrun.sh does. The commands are based
on the instructions on the wiki for glibc debugging [1,2].
By default, the script tells GDB to load the test case for symbol
information, so that, when a breakpoint is hit, the call stack is
displayed correctly (instead of printing lots of '??'s). For instance,
after running 'make' and 'make check', one could do the following:
$ ./debugglibc.sh nptl/tst-exec1 -b pthread_join
Reading symbols from /home/gabriel/build/powerpc64le/glibc//elf/ld.so...done.
Breakpoint 1 at 0x1444
add symbol table from file "nptl/tst-exec1"
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/home/gabriel/build/powerpc64le/glibc//nptl_db/libthread_db.so.1".
Breakpoint 1, 0x00007ffff7fb1444 in _dl_start_user () from /home/gabriel/build/powerpc64le/glibc/elf/ld.so
Breakpoint 2 at 0x7ffff7f49d48: file pthread_join.c, line 23.
Notice that the script will always start GDB with the program running
and halted at _dl_start_user. So, in order to reach the actual
breakpoint of interest, one should hit 'c', not 'r':
>>> c
Continuing.
[New Thread 0x7ffff7d1f180 (LWP 76443)]
[Switching to Thread 0x7ffff7d1f180 (LWP 76443)]
Thread 2 "ld.so" hit Breakpoint 2, __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
24 return __pthread_timedjoin_ex (threadid, thread_return, NULL, true);
Then inspect the call stack with 'bt', as usual, and see symbols from
both the test case and from the libraries themselves:
>>> bt
#0 __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
#1 0x0000000010001f4c in tf (arg=<optimized out>) at tst-exec1.c:37
#2 0x00007ffff7f487e8 in start_thread (arg=0x7ffff7510000) at pthread_create.c:479
#3 0x00007ffff7e523a8 in clone () at ../sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S:82
Tested for powerpc64le and x86_64.
[1] https://sourceware.org/glibc/wiki/Debugging/Loader_Debugging
[2] https://sourceware.org/glibc/wiki/Testing/Builds#Required_gdb_setup
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
fesetenv_mode is used variously to write the FPSCR exception enable
bits and rounding mode bits. These are referred to as the control
bits in the POWER ISA. Change the name to be reflective of its
current and expected use, and match up well with fegetenv_control.
libc_feholdsetround_noex_ppc_ctx currently performs:
1. Read FPSCR, save to context.
2. Create new FPSCR value: clear enables and set new rounding mode.
3. Write new value to FPSCR.
Since other bits just pass through, there is no need to write them.
Instead, write just the changed values (enables and rounding mode),
which can be a bit more efficient.
