AuroraMiddleware/gtk2
1
0
Fork 0
forked from AuroraMiddleware/gtk
Code Issues Pull Requests Projects Releases Wiki Activity
37ad6e1147
gtk2/gdk/gdkgl.c

756 lines
25 KiB
C
Raw Normal View History

gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
/* GDK - The GIMP Drawing Kit
Correct copyright year
2014-10-12 03:04:40 +00:00
* Copyright (C) 2014 Red Hat, Inc.
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include "config.h"
#include "gdkcairo.h"
#include "gdkglcontextprivate.h"
#include "gdkinternals.h"
#include <epoxy/gl.h>
#include <math.h>
static cairo_user_data_key_t direct_key;
void
gdk_cairo_surface_mark_as_direct (cairo_surface_t *surface,
GdkWindow *window)
{
cairo_surface_set_user_data (surface, &direct_key,
g_object_ref (window), g_object_unref);
}
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
static const char *
get_vertex_type_name (int type)
{
switch (type)
{
case GL_VERTEX_SHADER:
return "vertex";
case GL_GEOMETRY_SHADER:
return "geometry";
case GL_FRAGMENT_SHADER:
return "fragment";
}
return "unknown";
}
gdkgl: Make some helper functions static
2014-11-06 21:47:59 +00:00
static guint
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
create_shader (int type, const char const *code)
{
guint shader;
int status;
shader = glCreateShader (type);
glShaderSource (shader, 1, &code, NULL);
glCompileShader (shader);
glGetShaderiv (shader, GL_COMPILE_STATUS, &status);
if (status == GL_FALSE)
{
int log_len;
char *buffer;
glGetShaderiv (shader, GL_INFO_LOG_LENGTH, &log_len);
buffer = g_malloc (log_len + 1);
glGetShaderInfoLog (shader, log_len, NULL, buffer);
g_warning ("Compile failure in %s shader:\n%s\n", get_vertex_type_name (type), buffer);
g_free (buffer);
glDeleteShader (shader);
return 0;
}
return shader;
}
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
static void
make_program (GdkGLContextProgram *program,
const char const *vertex_shader_code,
const char const *fragment_shader_code)
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
{
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
guint vertex_shader, fragment_shader;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
int status;
vertex_shader = create_shader (GL_VERTEX_SHADER, vertex_shader_code);
if (vertex_shader == 0)
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
return;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
fragment_shader = create_shader (GL_FRAGMENT_SHADER, fragment_shader_code);
if (fragment_shader == 0)
{
glDeleteShader (vertex_shader);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
return;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
}
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
program->program = glCreateProgram ();
glAttachShader (program->program, vertex_shader);
glAttachShader (program->program, fragment_shader);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glLinkProgram (program->program);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glDeleteShader (vertex_shader);
glDeleteShader (fragment_shader);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glGetProgramiv (program->program, GL_LINK_STATUS, &status);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
if (status == GL_FALSE)
{
int log_len;
char *buffer;
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glGetProgramiv (program->program, GL_INFO_LOG_LENGTH, &log_len);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
buffer = g_malloc (log_len + 1);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glGetProgramInfoLog (program->program, log_len, NULL, buffer);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
g_warning ("Linker failure: %s\n", buffer);
g_free (buffer);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glDeleteProgram (program->program);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
}
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
program->position_location = glGetAttribLocation (program->program, "position");
program->uv_location = glGetAttribLocation (program->program, "uv");
program->map_location = glGetUniformLocation (program->program, "map");
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
}
static void
bind_vao (GdkGLContextPaintData *paint_data)
{
if (paint_data->vertex_array_object == 0)
{
glGenVertexArrays (1, &paint_data->vertex_array_object);
/* ATM we only use one VAO, so always bind it */
glBindVertexArray (paint_data->vertex_array_object);
}
}
static void
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
use_texture_2d_program (GdkGLContextPaintData *paint_data)
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
{
const char *vertex_shader_code =
"#version 120\n"
"uniform sampler2D map;"
"attribute vec2 position;\n"
"attribute vec2 uv;\n"
"varying vec2 vUv;\n"
"void main() {\n"
" gl_Position = vec4(position, 0, 1);\n"
" vUv = uv;\n"
"}\n";
const char *fragment_shader_code =
"#version 120\n"
"varying vec2 vUv;\n"
"uniform sampler2D map;\n"
"void main() {\n"
" gl_FragColor = texture2D (map, vUv);\n"
"}\n";
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
if (paint_data->texture_2d_quad_program.program == 0)
make_program (&paint_data->texture_2d_quad_program, vertex_shader_code, fragment_shader_code);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
if (paint_data->current_program != &paint_data->texture_2d_quad_program)
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
{
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
paint_data->current_program = &paint_data->texture_2d_quad_program;
glUseProgram (paint_data->current_program->program);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
}
}
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
static void
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
use_texture_rect_program (GdkGLContextPaintData *paint_data)
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
{
const char *vertex_shader_code =
"#version 120\n"
"uniform sampler2DRect map;"
"attribute vec2 position;\n"
"attribute vec2 uv;\n"
"varying vec2 vUv;\n"
"void main() {\n"
" gl_Position = vec4(position, 0, 1);\n"
" vUv = uv;\n"
"}\n";
const char *fragment_shader_code =
"#version 120\n"
"varying vec2 vUv;\n"
"uniform sampler2DRect map;\n"
"void main() {\n"
" gl_FragColor = texture2DRect (map, vUv);\n"
"}\n";
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
if (paint_data->texture_rect_quad_program.program == 0)
make_program (&paint_data->texture_rect_quad_program, vertex_shader_code, fragment_shader_code);
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
if (paint_data->current_program != &paint_data->texture_rect_quad_program)
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
{
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
paint_data->current_program = &paint_data->texture_rect_quad_program;
glUseProgram (paint_data->current_program->program);
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
}
}
Add gdk_gl_texture_quad() helper Right now this just centralizes the glBegin/glEnd code, but this will be replaced with buffer objects later.
2014-11-05 14:42:06 +00:00
void
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
gdk_gl_texture_quads (GdkGLContext *paint_context,
guint texture_target,
int n_quads,
GdkTexturedQuad *quads)
Add gdk_gl_texture_quad() helper Right now this just centralizes the glBegin/glEnd code, but this will be replaced with buffer objects later.
2014-11-05 14:42:06 +00:00
{
gdk/gdkgl.c: Fix Typo The extra ';' actually broke builds on C89 compilers...
2014-11-14 09:26:29 +00:00
GdkGLContextPaintData *paint_data = gdk_gl_context_get_paint_data (paint_context);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
GdkGLContextProgram *program;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
GdkWindow *window = gdk_gl_context_get_window (paint_context);
gdk_gl_texture_quad: Fix handling of window scales
2014-11-06 18:33:24 +00:00
int window_scale = gdk_window_get_scale_factor (window);
float w = gdk_window_get_width (window) * window_scale;
float h = gdk_window_get_height (window) * window_scale;
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
int i;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
bind_vao (paint_data);
if (paint_data->tmp_vertex_buffer == 0)
glGenBuffers(1, &paint_data->tmp_vertex_buffer);
if (paint_data->tmp_uv_buffer == 0)
glGenBuffers(1, &paint_data->tmp_uv_buffer);
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
if (texture_target == GL_TEXTURE_RECTANGLE_ARB)
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
use_texture_rect_program (paint_data);
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
else
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
use_texture_2d_program (paint_data);
program = paint_data->current_program;
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glActiveTexture (GL_TEXTURE0);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glUniform1i(program->map_location, 0); /* Use texture unit 0 */
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glEnableVertexAttribArray (0);
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
glEnableVertexAttribArray (1);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glBindBuffer (GL_ARRAY_BUFFER, paint_data->tmp_vertex_buffer);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glVertexAttribPointer (program->position_location, 2, GL_FLOAT, GL_FALSE, 0, NULL);
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glBindBuffer (GL_ARRAY_BUFFER, paint_data->tmp_uv_buffer);
gdkgl: Clean up program-manipulating code Abstract the program ID and locations into a "program struct" which we then use.
2014-11-22 17:29:27 +00:00
glVertexAttribPointer (program->uv_location, 2, GL_FLOAT, GL_FALSE, 0, NULL);
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
for (i = 0; i < n_quads; i++)
{
GdkTexturedQuad *quad = &quads[i];
float vertex_buffer_data[] = {
(quad->x2 * 2) / w - 1, (quad->y1 * 2) / h - 1,
(quad->x2 * 2) / w - 1, (quad->y2 * 2) / h - 1,
(quad->x1 * 2) / w - 1, (quad->y2 * 2) / h - 1,
(quad->x1 * 2) / w - 1, (quad->y1 * 2) / h - 1,
};
float uv_buffer_data[] = {
quad->u2, quad->v1,
quad->u2, quad->v2,
quad->u1, quad->v2,
quad->u1, quad->v1,
};
glBindBuffer (GL_ARRAY_BUFFER, paint_data->tmp_vertex_buffer);
glBufferData (GL_ARRAY_BUFFER, sizeof(vertex_buffer_data), vertex_buffer_data, GL_STREAM_DRAW);
glBindBuffer (GL_ARRAY_BUFFER, paint_data->tmp_uv_buffer);
glBufferData (GL_ARRAY_BUFFER, sizeof(uv_buffer_data), uv_buffer_data, GL_STREAM_DRAW);
glDrawArrays (GL_TRIANGLE_FAN, 0, 4);
}
gdk_gl_texture_quad: Use shaders to texture things This is the modern way OpenGL works, and using it will let us switch to a core context for the paint context, and work on OpenGL ES 2.0.
2014-11-06 08:13:36 +00:00
glDisableVertexAttribArray (0);
glDisableVertexAttribArray (1);
Add gdk_gl_texture_quad() helper Right now this just centralizes the glBegin/glEnd code, but this will be replaced with buffer objects later.
2014-11-05 14:42:06 +00:00
}
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
/* x,y,width,height describes a rectangle in the gl render buffer
coordinate space, and its top left corner is drawn at the current
position according to the cairo translation. */
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
/**
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
* gdk_cairo_draw_from_gl:
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
* @cr: a cairo context
* @window: The window we're rendering for (not necessarily into)
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
* @source: The GL ID of the source buffer
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
* @source_type: The type of the @source
* @buffer_scale: The scale-factor that the @source buffer is allocated for
* @x: The source x position in @source to start copying from in GL coordinates
* @y: The source y position in @source to start copying from in GL coordinates
* @width: The width of the region to draw
* @height: The height of the region to draw
*
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
* This is the main way to draw GL content in GTK+. It takes a render buffer ID
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
* (@source_type == #GL_RENDERBUFFER) or a texture id (@source_type == #GL_TEXTURE)
* and draws it onto @cr with an OVER operation, respecting the current clip.
Clarify docs for gdk_cairo_draw_from_gl
2014-10-30 11:22:08 +00:00
* The top left corner of the rectangle specified by @x, @y, @width and @height
* will be drawn at the current (0,0) position of the cairo_t.
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
*
* This will work for *all* cairo_t, as long as @window is realized, but the
* fallback implementation that reads back the pixels from the buffer may be
* used in the general case. In the case of direct drawing to a window with
* no special effects applied to @cr it will however use a more efficient
* approach.
*
* For #GL_RENDERBUFFER the code will always fall back to software for buffers
* with alpha components, so make sure you use #GL_TEXTURE if using alpha.
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
*
gdk_cairo_draw_from_gl: Document that this changes the current context
2014-11-06 08:11:17 +00:00
* Calling this may change the current GL context.
*
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
* Since: 3.16
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
*/
void
gdk_cairo_draw_from_gl (cairo_t *cr,
GdkWindow *window,
int source,
int source_type,
int buffer_scale,
int x,
int y,
int width,
int height)
{
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
GdkGLContext *paint_context;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_surface_t *image;
cairo_matrix_t matrix;
int dx, dy, window_scale;
gboolean trivial_transform;
cairo_surface_t *group_target;
GdkWindow *direct_window, *impl_window;
gdkgl: Don't constantly re-create the tmp framebuffer
2014-11-05 14:19:00 +00:00
guint framebuffer;
int alpha_size = 0;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_region_t *clip_region;
gdkgl: Don't constantly re-create the tmp framebuffer
2014-11-05 14:19:00 +00:00
GdkGLContextPaintData *paint_data;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
impl_window = window->impl_window;
window_scale = gdk_window_get_scale_factor (impl_window);
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
paint_context = gdk_window_get_paint_gl_context (window, NULL);
if (paint_context == NULL)
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
{
g_warning ("gdk_cairo_draw_gl_render_buffer failed - no paint context");
return;
}
clip_region = gdk_cairo_region_from_clip (cr);
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
gdk_gl_context_make_current (paint_context);
paint_data = gdk_gl_context_get_paint_data (paint_context);
gdkgl: Don't constantly re-create the tmp framebuffer
2014-11-05 14:19:00 +00:00
if (paint_data->tmp_framebuffer == 0)
glGenFramebuffersEXT (1, &paint_data->tmp_framebuffer);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
if (source_type == GL_RENDERBUFFER)
{
glBindRenderbufferEXT (GL_RENDERBUFFER_EXT, source);
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
glGetRenderbufferParameteriv (GL_RENDERBUFFER, GL_RENDERBUFFER_ALPHA_SIZE, &alpha_size);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
}
else if (source_type == GL_TEXTURE)
{
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
glBindTexture (GL_TEXTURE_2D, source);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
glGetTexLevelParameteriv (GL_TEXTURE_2D, 0, GL_TEXTURE_ALPHA_SIZE, &alpha_size);
}
else
{
g_warning ("Unsupported gl source type %d\n", source_type);
return;
}
group_target = cairo_get_group_target (cr);
direct_window = cairo_surface_get_user_data (group_target, &direct_key);
cairo_get_matrix (cr, &matrix);
dx = matrix.x0;
dy = matrix.y0;
/* Trivial == integer-only translation */
trivial_transform =
(double)dx == matrix.x0 && (double)dy == matrix.y0 &&
matrix.xx == 1.0 && matrix.xy == 0.0 &&
matrix.yx == 0.0 && matrix.yy == 1.0;
/* For direct paint of non-alpha renderbuffer, we can
just do a bitblit */
Export API to set GL flags This will be used in the inspector.
2014-11-07 04:29:16 +00:00
if ((_gdk_gl_flags & GDK_GL_SOFTWARE_DRAW_GL) == 0 &&
Add GDK_GL env var and GdkGLFlags This moves the GDK_ALWAYS_USE_GL env var to GDK_GL=always. It also changes GDK_DEBUG=nogl to GDK_GL=disable, as GDK_DEBUG is really only about debug loggin. It also adds some completely new flags: software-draw-gl: Always use software fallback for drawing gl content to a cairo_t. This disables the fastpaths that exist for drawing directly to a window and instead reads back the pixels into a cairo image surface. software-draw-surface: Always use software fallback for drawing cairo surfaces onto a gl-using window. This disables e.g. texture-from-pixmap on X11. software-draw: Enables both the above.
2014-11-06 09:21:48 +00:00
source_type == GL_RENDERBUFFER &&
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
alpha_size == 0 &&
direct_window != NULL &&
direct_window->current_paint.use_gl &&
trivial_transform &&
clip_region != NULL)
{
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
int unscaled_window_height;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
int i;
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
/* Create a framebuffer with the source renderbuffer and
make it the current target for reads */
gdkgl: Don't constantly re-create the tmp framebuffer
2014-11-05 14:19:00 +00:00
framebuffer = paint_data->tmp_framebuffer;
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
glBindFramebufferEXT (GL_FRAMEBUFFER_EXT, framebuffer);
glFramebufferRenderbufferEXT (GL_FRAMEBUFFER_EXT, GL_COLOR_ATTACHMENT0_EXT,
GL_RENDERBUFFER_EXT, source);
glBindFramebufferEXT (GL_DRAW_FRAMEBUFFER_EXT, 0);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
/* Translate to impl coords */
cairo_region_translate (clip_region, dx, dy);
glEnable (GL_SCISSOR_TEST);
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
gdk_window_get_unscaled_size (impl_window, NULL, &unscaled_window_height);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
glDrawBuffer (GL_BACK);
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
#define FLIP_Y(_y) (unscaled_window_height - (_y))
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
for (i = 0; i < cairo_region_num_rectangles (clip_region); i++)
{
cairo_rectangle_int_t clip_rect, dest;
cairo_region_get_rectangle (clip_region, i, &clip_rect);
clip_rect.x *= window_scale;
clip_rect.y *= window_scale;
clip_rect.width *= window_scale;
clip_rect.height *= window_scale;
glScissor (clip_rect.x, FLIP_Y (clip_rect.y + clip_rect.height),
clip_rect.width, clip_rect.height);
dest.x = dx * window_scale;
dest.y = dy * window_scale;
dest.width = width * window_scale / buffer_scale;
dest.height = height * window_scale / buffer_scale;
if (gdk_rectangle_intersect (&clip_rect, &dest, &dest))
{
int clipped_src_x = x + (dest.x - dx * window_scale);
int clipped_src_y = y + (height - dest.height - (dest.y - dy * window_scale));
glBlitFramebufferEXT(clipped_src_x, clipped_src_y,
(clipped_src_x + dest.width), (clipped_src_y + dest.height),
dest.x, FLIP_Y(dest.y + dest.height),
dest.x + dest.width, FLIP_Y(dest.y),
GL_COLOR_BUFFER_BIT, GL_NEAREST);
if (impl_window->current_paint.flushed_region)
{
cairo_rectangle_int_t flushed_rect;
flushed_rect.x = dest.x / window_scale;
flushed_rect.y = dest.y / window_scale;
flushed_rect.width = (dest.x + dest.width + window_scale - 1) / window_scale - flushed_rect.x;
flushed_rect.height = (dest.y + dest.height + window_scale - 1) / window_scale - flushed_rect.y;
cairo_region_union_rectangle (impl_window->current_paint.flushed_region,
&flushed_rect);
cairo_region_subtract_rectangle (impl_window->current_paint.need_blend_region,
&flushed_rect);
}
}
}
glDisable (GL_SCISSOR_TEST);
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
glBindFramebufferEXT (GL_FRAMEBUFFER_EXT, 0);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
#undef FLIP_Y
}
/* For direct paint of alpha or non-alpha textures we can use texturing */
Export API to set GL flags This will be used in the inspector.
2014-11-07 04:29:16 +00:00
else if ((_gdk_gl_flags & GDK_GL_SOFTWARE_DRAW_GL) == 0 &&
Add GDK_GL env var and GdkGLFlags This moves the GDK_ALWAYS_USE_GL env var to GDK_GL=always. It also changes GDK_DEBUG=nogl to GDK_GL=disable, as GDK_DEBUG is really only about debug loggin. It also adds some completely new flags: software-draw-gl: Always use software fallback for drawing gl content to a cairo_t. This disables the fastpaths that exist for drawing directly to a window and instead reads back the pixels into a cairo image surface. software-draw-surface: Always use software fallback for drawing cairo surfaces onto a gl-using window. This disables e.g. texture-from-pixmap on X11. software-draw: Enables both the above.
2014-11-06 09:21:48 +00:00
source_type == GL_TEXTURE &&
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
direct_window != NULL &&
direct_window->current_paint.use_gl &&
trivial_transform &&
clip_region != NULL)
{
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
int unscaled_window_height;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
GLint texture_width;
GLint texture_height;
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
int i, n_rects;
GdkTexturedQuad *quads;
cairo_rectangle_int_t clip_rect;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
/* Translate to impl coords */
cairo_region_translate (clip_region, dx, dy);
if (alpha_size != 0)
{
cairo_region_t *opaque_region, *blend_region;
opaque_region = cairo_region_copy (clip_region);
cairo_region_subtract (opaque_region, impl_window->current_paint.flushed_region);
cairo_region_subtract (opaque_region, impl_window->current_paint.need_blend_region);
if (!cairo_region_is_empty (opaque_region))
gdk_gl_texture_from_surface (impl_window->current_paint.surface,
opaque_region);
blend_region = cairo_region_copy (clip_region);
cairo_region_intersect (blend_region, impl_window->current_paint.need_blend_region);
glEnable (GL_BLEND);
if (!cairo_region_is_empty (blend_region))
gdk_gl_texture_from_surface (impl_window->current_paint.surface,
blend_region);
cairo_region_destroy (opaque_region);
cairo_region_destroy (blend_region);
}
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
glBindTexture (GL_TEXTURE_2D, source);
glGetTexLevelParameteriv (GL_TEXTURE_2D, 0, GL_TEXTURE_WIDTH, &texture_width);
glGetTexLevelParameteriv (GL_TEXTURE_2D, 0, GL_TEXTURE_HEIGHT, &texture_height);
glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
glEnable (GL_SCISSOR_TEST);
glEnable (GL_TEXTURE_2D);
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
gdk_window_get_unscaled_size (impl_window, NULL, &unscaled_window_height);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
#define FLIP_Y(_y) (unscaled_window_height - (_y))
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
cairo_region_get_extents (clip_region, &clip_rect);
glScissor (clip_rect.x, FLIP_Y (clip_rect.y + clip_rect.height),
clip_rect.width, clip_rect.height);
n_rects = cairo_region_num_rectangles (clip_region);
quads = g_new (GdkTexturedQuad, n_rects);
for (i = 0; i < n_rects; i++)
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
{
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
cairo_rectangle_int_t dest;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_region_get_rectangle (clip_region, i, &clip_rect);
clip_rect.x *= window_scale;
clip_rect.y *= window_scale;
clip_rect.width *= window_scale;
clip_rect.height *= window_scale;
dest.x = dx * window_scale;
dest.y = dy * window_scale;
dest.width = width * window_scale / buffer_scale;
dest.height = height * window_scale / buffer_scale;
if (gdk_rectangle_intersect (&clip_rect, &dest, &dest))
{
int clipped_src_x = x + (dest.x - dx * window_scale);
int clipped_src_y = y + (height - dest.height - (dest.y - dy * window_scale));
gdkgl: Use a GdkTexturedQuad struct to paint quads We'll soon have a new function that paints multiple quads.
2014-11-22 17:39:18 +00:00
GdkTexturedQuad quad = {
dest.x, FLIP_Y(dest.y),
dest.x + dest.width, FLIP_Y(dest.y + dest.height),
clipped_src_x / (float)texture_width, (clipped_src_y + dest.height) / (float)texture_height,
(clipped_src_x + dest.width) / (float)texture_width, clipped_src_y / (float)texture_height,
};
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
quads[i] = quad;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
if (impl_window->current_paint.flushed_region)
{
cairo_rectangle_int_t flushed_rect;
flushed_rect.x = dest.x / window_scale;
flushed_rect.y = dest.y / window_scale;
flushed_rect.width = (dest.x + dest.width + window_scale - 1) / window_scale - flushed_rect.x;
flushed_rect.height = (dest.y + dest.height + window_scale - 1) / window_scale - flushed_rect.y;
cairo_region_union_rectangle (impl_window->current_paint.flushed_region,
&flushed_rect);
cairo_region_subtract_rectangle (impl_window->current_paint.need_blend_region,
&flushed_rect);
}
}
}
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
gdk_gl_texture_quads (paint_context, GL_TEXTURE_2D, n_rects, quads);
g_free (quads);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
if (alpha_size != 0)
glDisable (GL_BLEND);
glDisable (GL_TEXTURE_2D);
#undef FLIP_Y
}
else
{
/* Software fallback */
/* TODO: avoid reading back non-required data due to dest clip */
image = cairo_surface_create_similar_image (cairo_get_target (cr),
(alpha_size == 0) ? CAIRO_FORMAT_RGB24 : CAIRO_FORMAT_ARGB32,
width, height);
cairo_surface_set_device_scale (image, buffer_scale, buffer_scale);
gdkgl: Don't constantly re-create the tmp framebuffer
2014-11-05 14:19:00 +00:00
framebuffer = paint_data->tmp_framebuffer;
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
glBindFramebufferEXT (GL_FRAMEBUFFER_EXT, framebuffer);
if (source_type == GL_RENDERBUFFER)
{
/* Create a framebuffer with the source renderbuffer and
make it the current target for reads */
glFramebufferRenderbufferEXT (GL_FRAMEBUFFER_EXT, GL_COLOR_ATTACHMENT0_EXT,
GL_RENDERBUFFER_EXT, source);
}
else
{
glFramebufferTexture2DEXT (GL_FRAMEBUFFER_EXT, GL_COLOR_ATTACHMENT0_EXT,
GL_TEXTURE_2D, source, 0);
}
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
glPixelStorei (GL_PACK_ALIGNMENT, 4);
glPixelStorei (GL_PACK_ROW_LENGTH, cairo_image_surface_get_stride (image) / 4);
glReadPixels (x, y, width, height, GL_BGRA, GL_UNSIGNED_INT_8_8_8_8_REV,
cairo_image_surface_get_data (image));
glPixelStorei (GL_PACK_ROW_LENGTH, 0);
GdkGL: Fix and clean up gdk_cairo_draw_from_gl() This was unnecessarily creating a framebuffer in the texture case, and it was not properly setting up a framebuffer with the texture as source in the software fallback w/ texture source case.
2014-11-05 08:52:51 +00:00
glBindFramebufferEXT (GL_FRAMEBUFFER_EXT, 0);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_surface_mark_dirty (image);
/* Invert due to opengl having different origin */
cairo_scale (cr, 1, -1);
cairo_translate (cr, 0, -height / buffer_scale);
cairo_set_source_surface (cr, image, 0, 0);
cairo_set_operator (cr, CAIRO_OPERATOR_OVER);
cairo_paint (cr);
cairo_surface_destroy (image);
}
if (clip_region)
cairo_region_destroy (clip_region);
}
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
/* This is always called with the paint context current */
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
void
gdk_gl_texture_from_surface (cairo_surface_t *surface,
Trivial formatting fixes
2014-10-12 03:17:34 +00:00
cairo_region_t *region)
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
{
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
GdkGLContext *paint_context;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_surface_t *image;
double device_x_offset, device_y_offset;
cairo_rectangle_int_t rect, e;
int n_rects, i;
GdkWindow *window;
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
int unscaled_window_height;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
unsigned int texture_id;
int window_scale;
double sx, sy;
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
float umax, vmax;
gboolean use_texture_rectangle;
guint target;
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
GdkTexturedQuad *quads;
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
paint_context = gdk_gl_context_get_current ();
Export API to set GL flags This will be used in the inspector.
2014-11-07 04:29:16 +00:00
if ((_gdk_gl_flags & GDK_GL_SOFTWARE_DRAW_SURFACE) == 0 &&
Add GDK_GL env var and GdkGLFlags This moves the GDK_ALWAYS_USE_GL env var to GDK_GL=always. It also changes GDK_DEBUG=nogl to GDK_GL=disable, as GDK_DEBUG is really only about debug loggin. It also adds some completely new flags: software-draw-gl: Always use software fallback for drawing gl content to a cairo_t. This disables the fastpaths that exist for drawing directly to a window and instead reads back the pixels into a cairo image surface. software-draw-surface: Always use software fallback for drawing cairo surfaces onto a gl-using window. This disables e.g. texture-from-pixmap on X11. software-draw: Enables both the above.
2014-11-06 09:21:48 +00:00
paint_context &&
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
GDK_GL_CONTEXT_GET_CLASS (paint_context)->texture_from_surface &&
GDK_GL_CONTEXT_GET_CLASS (paint_context)->texture_from_surface (paint_context, surface, region))
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
return;
/* Software fallback */
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
use_texture_rectangle = gdk_gl_context_use_texture_rectangle (paint_context);
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
GdkGL: Rename "context" to "paint_context" to clarify things a bit
2014-11-06 08:12:40 +00:00
window = gdk_gl_context_get_window (paint_context);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
window_scale = gdk_window_get_scale_factor (window);
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
gdk_window_get_unscaled_size (window, NULL, &unscaled_window_height);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
sx = sy = 1;
cairo_surface_get_device_scale (window->current_paint.surface, &sx, &sy);
cairo_surface_get_device_offset (surface,
&device_x_offset, &device_y_offset);
glGenTextures (1, &texture_id);
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
if (use_texture_rectangle)
target = GL_TEXTURE_RECTANGLE_ARB;
else
target = GL_TEXTURE_2D;
glBindTexture (target, texture_id);
glEnable (target);
gdk_gl_texture_from_surface: Enable scissor test
2014-11-06 19:37:10 +00:00
glEnable (GL_SCISSOR_TEST);
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
GdkGL: Fix up GL_ARB_texture_rectangle support This broke when gdk_gl_texture_quad moved to shaders. We need a specialized shader for the rectangle case.
2014-11-06 10:31:01 +00:00
glTexParameteri (target, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
glTexParameteri (target, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
glTexParameteri (target, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
glTexParameteri (target, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
n_rects = cairo_region_num_rectangles (region);
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
quads = g_new (GdkTexturedQuad, n_rects);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
for (i = 0; i < n_rects; i++)
{
cairo_region_get_rectangle (region, i, &rect);
GL: Fix typo in gdk_gl_texture_from_surface Got a sign wrong in commit 800c712738f5666937e32d9f8cb32353513b9423
2014-11-20 14:36:21 +00:00
glScissor (rect.x * window_scale, unscaled_window_height - (rect.y + rect.height) * window_scale,
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
rect.width * window_scale, rect.height * window_scale);
e = rect;
e.x *= sx;
e.y *= sy;
e.x += (int)device_x_offset;
e.y += (int)device_y_offset;
e.width *= sx;
e.height *= sy;
image = cairo_surface_map_to_image (surface, &e);
glPixelStorei (GL_UNPACK_ALIGNMENT, 4);
glPixelStorei (GL_UNPACK_ROW_LENGTH, cairo_image_surface_get_stride (image)/4);
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
glTexImage2D (target, 0, 4, e.width, e.height, 0, GL_BGRA, GL_UNSIGNED_INT_8_8_8_8_REV,
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
cairo_image_surface_get_data (image));
glPixelStorei (GL_UNPACK_ROW_LENGTH, 0);
cairo_surface_unmap_image (surface, image);
GL: Fix GL Y coordinate flipping to use unscaled window height This is needed in the edge case where the X11 backend rounded the actual size, and the GL flipping really needs the correct window height to do proper Y coordinate flipping. https://bugzilla.gnome.org/show_bug.cgi?id=739750
2014-11-20 10:53:09 +00:00
#define FLIP_Y(_y) (unscaled_window_height - (_y))
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
if (use_texture_rectangle)
{
umax = rect.width * sx;
vmax = rect.height * sy;
}
else
{
umax = 1.0;
vmax = 1.0;
}
gdkgl: Use a GdkTexturedQuad struct to paint quads We'll soon have a new function that paints multiple quads.
2014-11-22 17:39:18 +00:00
{
GdkTexturedQuad quad = {
rect.x * window_scale, FLIP_Y(rect.y),
(rect.x + rect.width) * window_scale, FLIP_Y((rect.y + rect.height) * window_scale),
0, 0,
umax, vmax,
};
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
quads[i] = quad;
gdkgl: Use a GdkTexturedQuad struct to paint quads We'll soon have a new function that paints multiple quads.
2014-11-22 17:39:18 +00:00
}
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
}
gdkgl: Texture many quads at once for performance reasons This isn't fully performant yet. To be fully performant, we'd need to do everything in one giant buffer.
2014-11-22 17:47:35 +00:00
gdk_gl_texture_quads (paint_context, target, n_rects, quads);
g_free (quads);
gdk_gl_texture_from_surface: Enable scissor test
2014-11-06 19:37:10 +00:00
glDisable (GL_SCISSOR_TEST);
opengl: Use GL_TEXTURE_2D rather than GL_TEXTURE_RECTANGLE_ARB when possible This is more standard, and most driver support non-power-of-2 TEXTURE_2D these days. We fall back for ancient drivers.
2014-10-27 20:15:37 +00:00
glDisable (target);
gdk: Add support for OpenGL This adds the new type GdkGLContext that wraps an OpenGL context for a particular native window. It also adds support for the gdk paint machinery to use OpenGL to draw everything. As soon as anyone creates a GL context for a native window we create a "paint context" for that GdkWindow and switch to using GL for painting it. This commit contains only an implementation for X11 (using GLX). The way painting works is that all client gl contexts draw into offscreen buffers rather than directly to the back buffer, and the way something gets onto the window is by using gdk_cairo_draw_from_gl() to draw part of that buffer onto the draw cairo context. As a fallback (if we're doing redirected drawing or some effect like a cairo_push_group()) we read back the gl buffer into memory and composite using cairo. This means that GL rendering works in all cases, including rendering to a PDF. However, this is not particularly fast. In the *typical* case, where we're drawing directly to the window in the regular paint loop we hit the fast path. The fast path uses opengl to draw the buffer to the window back buffer, either by blitting or texturing. Then we track the region that was drawn, and when the draw ends we paint the normal cairo surface to the window (using texture-from-pixmap in the X11 case, or texture from cairo image otherwise) in the regions where there is no gl painted. There are some complexities wrt layering of gl and cairo areas though: * We track via gdk_window_mark_paint_from_clip() whenever gtk is painting over a region we previously rendered with opengl (flushed_region). This area (needs_blend_region) is blended rather than copied at the end of the frame. * If we're drawing a gl texture with alpha we first copy the current cairo_surface inside the target region to the back buffer before we blend over it. These two operations allow us full stacking of transparent gl and cairo regions.
2014-10-09 08:45:44 +00:00
glDeleteTextures (1, &texture_id);
}
Reference in New Issue Copy Permalink