Instead of recording the way up from the target widget to the grab
widget (or toplevel) and then walking that path upwards, just walk the
parent chain and look at the cursor.
I was stuck in an X session and noticed that my resize corners
all got east or north cursors. It turns out that gnome-shell
does not properly advertise support for edge constraints under X11,
and the absence of that makes the code for determining the edge
under the cursor misbehave.
This change should fix that.
The code gets rid of the GtkTreeView and replaces it with a GtkListBox.
Most of the logic is now done via GListModel subclasses.
A big change is that this new list is now tracking updates itself and
doesn't need to be manually updated. All code that used to cause rescans
or add forgotten objects to the tree has been removed.
If objects are missing from the object tree, the logic for tracking them
needs to be added.
CSD titlebar are included in the focus-chain. The logic used makes sure that the
initial focus avoids the titlebar, but tabbing around will eventually get there.
This logic fails in case the window has no other focusable widgets apart from
the ones in the header-bar. If this happens keynav focus will be lost. To handle
the above scenario, we need to fallback to focus the header-bar (if any).
Fixes: https://gitlab.gnome.org/GNOME/gnome-software/issues/404
The previous attempt at removing configure events entirely
was causing some dialogs not to show up under Wayland.
Presumably due to ordering issues with emitting ::size-change
out of the backend.
Instead, keep configure events in the event queue, but handle
them on the gdk side. This keeps the ordering intact, while
still removing configure events from the api. The dialogs
show up now.
The opaque region is only set when the background color is opaque. So
we need to do something about it when the background color changes.
However, in the case where a size allocation is going to happen, we
already do this update in size_allocate(), so in that case avoid doing
it twice.
We still need a drag gesture both on front (capture) and back (bubble)
to handle dragging from both the GtkWindow widget and chrome in the
headerbar. But we can do it through 2 drag gestures, instead of special
event handling code.
In particular, this patch removes:
gdk_surface_get_events()
gdk_surface_set_events()
gdk_surface_get_device_events()
gdk_surface_set_device_events()
Event masks so far still exist for grabs.
This may result on the later emission of crossing events, with one of the
sides being already unmapped/unrealized. The widget being unmapped will
result on repick and emission of a set of crossing events anyway.
1b9aa1b708 ('a11y: drop the focus tracker') removed a bit too much. We
still have to emit window:activate/deactivate events. They are easy to
emit anyway.
Fixes#127
This is an automated change doing these command:
git sed -f g gtk_widget_set_has_window gtk_widget_set_has_surface
git sed -f g gtk_widget_get_has_window gtk_widget_get_has_surface
git sed -f g gtk_widget_set_parent_window gtk_widget_set_parent_surface
git sed -f g gtk_widget_get_parent_window gtk_widget_get_parent_surface
git sed -f g gtk_widget_set_window gtk_widget_set_surface
git sed -f g gtk_widget_get_window gtk_widget_get_surface
git sed -f g gtk_widget_register_window gtk_widget_register_surface
git sed -f g gtk_widget_unregister_window gtk_widget_unregister_surface
git checkout NEWS*
This is an automatic rename of various things related
to the window->surface rename.
Public symbols changed by this is:
GDK_MODE_WINDOW
gdk_device_get_window_at_position
gdk_device_get_window_at_position_double
gdk_device_get_last_event_window
gdk_display_get_monitor_at_window
gdk_drag_context_get_source_window
gdk_drag_context_get_dest_window
gdk_drag_context_get_drag_window
gdk_draw_context_get_window
gdk_drawing_context_get_window
gdk_gl_context_get_window
gdk_synthesize_window_state
gdk_surface_get_window_type
gdk_x11_display_set_window_scale
gsk_renderer_new_for_window
gsk_renderer_get_window
gtk_text_view_buffer_to_window_coords
gtk_tree_view_convert_widget_to_bin_window_coords
gtk_tree_view_convert_tree_to_bin_window_coords
The commands that generated this are:
git sed -f g "GDK window" "GDK surface"
git sed -f g window_impl surface_impl
(cd gdk; git sed -f g impl_window impl_surface)
git sed -f g WINDOW_IMPL SURFACE_IMPL
git sed -f g GDK_MODE_WINDOW GDK_MODE_SURFACE
git sed -f g gdk_draw_context_get_window gdk_draw_context_get_surface
git sed -f g gdk_drawing_context_get_window gdk_drawing_context_get_surface
git sed -f g gdk_gl_context_get_window gdk_gl_context_get_surface
git sed -f g gsk_renderer_get_window gsk_renderer_get_surface
git sed -f g gsk_renderer_new_for_window gsk_renderer_new_for_surface
(cd gdk; git sed -f g window_type surface_type)
git sed -f g gdk_surface_get_window_type gdk_surface_get_surface_type
git sed -f g window_at_position surface_at_position
git sed -f g event_window event_surface
git sed -f g window_coord surface_coord
git sed -f g window_state surface_state
git sed -f g window_cursor surface_cursor
git sed -f g window_scale surface_scale
git sed -f g window_events surface_events
git sed -f g monitor_at_window monitor_at_surface
git sed -f g window_under_pointer surface_under_pointer
(cd gdk; git sed -f g for_window for_surface)
git sed -f g window_anchor surface_anchor
git sed -f g WINDOW_IS_TOPLEVEL SURFACE_IS_TOPLEVEL
git sed -f g native_window native_surface
git sed -f g source_window source_surface
git sed -f g dest_window dest_surface
git sed -f g drag_window drag_surface
git sed -f g input_window input_surface
git checkout NEWS* po-properties po docs/reference/gtk/migrating-3to4.xml
Rename all *window.[ch] source files.
This is an automatic operation, done by the following commands:
for i in $(git ls-files gdk | grep window); do
git mv $i $(echo $i | sed s/window/surface/);
git sed -f g $(basename $i) $(basename $i | sed s/window/surface/) ;
done
git checkout NEWS* po-properties po
This renames the GdkWindow class and related classes (impl, backend
subclasses) to surface. Additionally it renames related types:
GdkWindowAttr, GdkWindowPaint, GdkWindowWindowClass, GdkWindowType,
GdkWindowTypeHint, GdkWindowHints, GdkWindowState, GdkWindowEdge
This is an automatic conversion using the below commands:
git sed -f g GdkWindowWindowClass GdkSurfaceSurfaceClass
git sed -f g GdkWindow GdkSurface
git sed -f g "gdk_window\([ _\(\),;]\|$\)" "gdk_surface\1" # Avoid hitting gdk_windowing
git sed -f g "GDK_WINDOW\([ _\(]\|$\)" "GDK_SURFACE\1" # Avoid hitting GDK_WINDOWING
git sed "GDK_\([A-Z]*\)IS_WINDOW\([_ (]\|$\)" "GDK_\1IS_SURFACE\2"
git sed GDK_TYPE_WINDOW GDK_TYPE_SURFACE
git sed -f g GdkPointerWindowInfo GdkPointerSurfaceInfo
git sed -f g "BROADWAY_WINDOW" "BROADWAY_SURFACE"
git sed -f g "broadway_window" "broadway_surface"
git sed -f g "BroadwayWindow" "BroadwaySurface"
git sed -f g "WAYLAND_WINDOW" "WAYLAND_SURFACE"
git sed -f g "wayland_window" "wayland_surface"
git sed -f g "WaylandWindow" "WaylandSurface"
git sed -f g "X11_WINDOW" "X11_SURFACE"
git sed -f g "x11_window" "x11_surface"
git sed -f g "X11Window" "X11Surface"
git sed -f g "WIN32_WINDOW" "WIN32_SURFACE"
git sed -f g "win32_window" "win32_surface"
git sed -f g "Win32Window" "Win32Surface"
git sed -f g "QUARTZ_WINDOW" "QUARTZ_SURFACE"
git sed -f g "quartz_window" "quartz_surface"
git sed -f g "QuartzWindow" "QuartzSurface"
git checkout NEWS* po-properties
Remove all the old 2.x and 3.x version annotations.
GTK+ 4 is a new start, and from the perspective of a
GTK+ 4 developer all these APIs have been around since
the beginning.
The main GDK thread lock is not portable and deprecated.
The only reason why gdk_threads_add_timeout() and
gdk_threads_add_timeout_full() exist is to allow invoking a callback
with the GDK lock held, in case 3rd party libraries still use the
deprecated gdk_threads_enter()/gdk_threads_leave() API.
Since we're removing the GDK lock, and we're releasing a new major API,
such code cannot exist any more; this means we can use the GLib API for
installing timeout callbacks.
https://bugzilla.gnome.org/show_bug.cgi?id=793124
The main GDK thread lock is not portable and deprecated.
The only reason why gdk_threads_add_idle() and
gdk_threads_add_idle_full() exist is to allow invoking a callback with
the GDK lock held, in case 3rd party libraries still use the deprecated
gdk_threads_enter()/gdk_threads_leave() API.
Since we're removing the GDK lock, and we're releasing a new major API,
such code cannot exist any more; this means we can use the GLib API for
installing idle callbacks.
https://bugzilla.gnome.org/show_bug.cgi?id=793124
The event is not useful at all, so we are better off
with a signal that doesn't have it, and it is only
relevant on toplevel windows, so we don't need it on
GtkWidget.
With this commit, delete events no longer go through the
::event, ::delete-event, ::event-after widget signals,
but just cause the ::close-request signal on GtkWindow to be
emitted.
Using get_preferred_size here does not work since it computes the
minimum height for the minimum width, but we want to know the minimum
height for the current width.
The fix is twofold. First, when checking that a corner is resizable, we must
check the constraints on both edges. Second, when checking either edge we
must include both perpendicular sides in order to allow those to be
resizable when the constraint does not allow resizing the edge being
checked.
When looking for the cursor to apply, start from the innermost
widget and go up. This is the right behavior for cases like
entry icons. The top-down order we were using so far is the
right behavior for cases like global wait cursors. Since we
have entry icons in gtk, but not global wait cursors, lets
pick the other order for now.
application/x-rootwindow-drop is not useful anywhere else,
so put it under #ifdef GDK_WINDOWING_X11
On W32 this prevents toplevels from automatically becoming valid
drop targets with a useless drop type.
(This commit is cherry-picked from the gtk-3-22 branch)
https://bugzilla.gnome.org/show_bug.cgi?id=786509
Instead of allowing people to pass a uint user-data, insist on them
comparing mime types.
The user data was a uint instead of a pointer anyway, so uniqueness
could not be guaranteed and it caused more issues than it was worth.
And that's ignoring the fact that it basically wasn't used.
Change constructors to reflect that.
While doing so, also add a fallback argument to the cursor constructors,
so it is now possible to create cursors with fallback.
The check used to achieve discarding events not meant for the window
widget itself (because they are handled in the regular paths). Using
the target widget is the equivalent now.
Use g_value_set/get_boxed() in gtk_window_get/set_property(), case PROP_ICON.
icon_from_list() shall always add a reference to the returned icon.
gtk_window_set_icon() must accept icon != NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=789870
We disconnect from the GDK window, so the renderer can't keep any useful
state.
Plus, we might be using an entirely different window next time we
realize (after a call to gtk_window_set_display() for example) that should
use a completely different renderer anyway.
And have a priv->display instead of a priv->screen.
Includes turning gtk_menu_set_screen() into gtk_menu_set_display(),
because that function just forwards to its window.
If the compositor prefers server-side decorations and the client doesn't
customize the title bar, we disable client-side decorations and let the
compositor know. Otherwise, we continue to use client-side decorations.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
https://bugzilla.gnome.org/show_bug.cgi?id=781909
As Timm Baedert pointed out, the previous fix made the
menubar go on top of popovers, which is just wrong. Instead,
make gtk_window_snapshot handle all direct children of the
window, taking care to stack popovers correctly.
This patch makes that work using 1 of 2 options:
1. Add all missing enums to the switch statement
or
2. Cast the switch argument to a uint to avoid having to do that (mostly
for GdkEventType).
I even found a bug while doing that: clearing a GtkImage with a surface
did not notify thae surface property.
The reason for enabling this flag even though it is tedious at times is
that it is very useful when adding values to an enum, because it makes
GTK immediately warn about all the switch statements where this enum is
relevant.
And I expect changes to enums to be frequent during the GTK4 development
cycle.
Clarify that ::destroy, not ::hide*, removes a window from its app, by
replacing the mention of open windows with the blurb on destruction from
:application, completing commit 7db4bee4b6
Also link to the equivalent gtk_application_(add|remove)_window() calls,
since Application.add_window() already links back to Window:application.
* unless you use gtkmm…
https://bugzilla.gnome.org/show_bug.cgi?id=639931
Instead of relying on special values of edge constraints, this
patch adds an internal-only gdk_window_supports_edge_constraints()
function that by default returns FALSE, and is implemented by
GdkWindowWayland and GdkWindowX11.
This way, we can properly detect server-side support for this
feature and adapt accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
The last touch on this patch series is making GtkWindow able to
selectively adjust various UI details based on the different
tiled edges. The main driver here is that we don't want to show
shadows on edges that are constrained.
This patch adds the necessary code to do that, while still
maintaining compatibility with the old ways.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
GTK windows don't have their tiling states really
hooked into the client-side decoration code, and
the only effect it has is disabling the resizing
edges.
With the introduction of per-edge tiling information,
we are backed by much more precise data on how the
window manager wants the app to behave.
This patch, then, fixes GtkWindow to take into account
per-edge tiling information. For compatibility purposes,
the previous tiled field was kept, and thing will just
continue working if no edge information is supplied.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
Do not connect to get_settings_for_screen() if we have no screen…
Use g_signal_connect(), not connect_object(), to match how set_screen()
makes this same connection, and how finalize() already disconnects it.
https://bugzilla.gnome.org/show_bug.cgi?id=705640
Since setting a clip is mandatory for almost all widgets, we can as well
change the size-allocate signature to include a out_clip parameter, just
like GtkCssGadget did. And since we now always propagate baselines, we
might as well pass that one on to size-allocate.
This way we can also make sure to transform the clip returned from
size-allocate to parent-coordinates, i.e. the same coordinate space
priv->allocation is in.
That means the whole hierarchy is getting destroyed, leaving those
behind incurs not only in a leak, but also on weak refs (and unintended
repick) to happen in the wrong moment.
As we now refrain from sending the crossing events if there's an
implicit grab, those events must be sent on button release when
the implicit grab is broken.
Check the grab widget (both explicit and implicit) and check for a cursor
from the target widget up to this grab widget. If the target widget is
outside the grab widget, only the grab wigdet's cursor will be checked.
This also means that we have to ensure the cursor is updated on button
releases, as an implicit grab being deactivated must trigger a cursor
lookup from the target widget.
We don't draw or size-allocate the titlebar when the window is
fullscreen or undecorated, so reflect this by setting it to
!child_visible. This can happen when changing the value of the decorated
property while the window is shown.
We can just replace window comparisons with coordinate matching, the
cursor corresponding to edges is now set in a capture-phase motion
handler, as cursors aren't set on GdkWindows anymore.
There should be no circumstances where an implicit grab is requested but
no focus exists, there's however circumstances (like windowing grabs taking
input to a different window) where we might get implicit grabs being undone
when then new window didn't create a focus for the pointer itself.
Only if they fall outside the grab widget, in that case the widget holding
the implicit grab won't be receiving events anymore, so we can just undo
it.
We now rely on toplevels receiving and forwarding all the events
the windowing should be able to handle. Event masks are no longer a
way to determine whether an event is deliverable ot a widget.
Events will always be delivered in the three captured/target/bubbled
phases, widgets can now just attach GtkEventControllers and let those
handle the events.
Unlike GTK+ grabs which are global to all/one device, the implicit grab
is per focus, which means each may have implicit grabs on different or
the same widget.
Each toplevel will keep its own tracking of the current ongoing foci,
add the plumbing that will allow to create/update/remove those as they
come and go.
The user data passed when exporting a Wayland window was supposed to be
freed using the destroy_func, as is commonly done. This was previously
broken, as the user data was just NULL:ed when exported, and only
actually destroyed when unexporting before having exported.
While e016d9a5db fixed this, it introduced
a regression, as GtkWindow was nice enough to free the memory anyway
after having received the exported handle, causing it now to double
free.
https://bugzilla.gnome.org/show_bug.cgi?id=782109
This was only every implemented under X11, and with CSD,
this is clearly in the application realm. We should not
pretend that we can support it on the toolkit level.
https://bugzilla.gnome.org/show_bug.cgi?id=775061
and remove gsk_renderer_get_for_display().
This new function returns a realized renderer. Because of that, GSK can
catch failures to realize, destroy the renderer and try another one.
Or in short: I can finally use GTK on Weston with the nvidia binary
drivers again.
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
Instead of having a gsk_renderer_set_window() call, pass the window to
realize(). This way, the realization can fail with the wrong window.
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
We need to unrealize the children manually for that to happen, but so it
goes.
The order is necessary because we want the renderer to still be alive
while children are unrealizing.
We want to unrealize the renderer only after all widgets have been
unrealized. Otherwise, the widgets cannot release rendering resources
like textures.
and gtk_snapshot_render_frame() to be direct replacements for the
old gtk_render_*() functions.
Use them to replace Cairo usage completely in gtk_window_snapshot().
We now try to emulate cairo_t:
We keep a stack of nodes via push/pop and a transform matrix.
So whenever a new node is added to the snapshot, we transform it
by the current transform matrix and append it to the current node.
Switch code to use gdk_display_is_composited() instead.
The new code also doesn't use a vfunc to query the property but rather
requires the backend to call set_composited()/set_rgba() to change the
value.
Includes the ability to turn on updates in the inspector. Animations are
now run via a tick function which allows us to neatly overlay a
semi-transparent red rectangle and fade it out over time.
It also probably enables way more, but somebody with more UI neatness
than me needs to figure out what it eanbles first...
Before, we would immediately invalidate the GdkWindow of the widget, now
we call the parent's GtkWidgetClass.queue_draw_child() function.
This allows the parent to track redraw queueing of children.
By default GtkWidgetClass.queue_draw_child() will again chain up to its
parent while respecting the GdkWindow hierarchy for clipping.
GtkWindow is then the only widget actually invalidating the GdkWindow.
This essentially moves redraw queueing from GDK to GTK.
These complicate a lot of GdkWindow internals to implement features
that not a lot of apps use, and will be better achieved using gsk.
So, we just drop it all.
Add a new ::measure vfunc similar to GtkCssGadget's that widget
implementations have to override instead of the old get_preferred_width,
get_preferred_height, get_preferred_width_for_height,
get_preferred_height_for_width and
get_preferred_height_and_baseline_for_width.
The details of the modelview and projection matrices are only useful for
the GL renderer; there's really no point in having those details
available in the generic API — especially as the Cairo fallback renderer
cannot really set up a complex modelview or a projection matrix.
Since we use an FBO to render the contents of the render node tree, the
coordinate space is going to be flipped in GL. We can undo the flip by
using an appropriate projection matrix, instead of changing the sampling
coordinates in the shaders and updating all our coordinates at render
time.
Render nodes need access to rendering information like scaling factors.
If we keep render nodes separate from renderers until we submit a nodes
tree for rendering we're going to have to duplicate all that information
in a way that makes the API more complicated and fuzzier on its
semantics.
By having GskRenderer create GskRenderNode instances we can tie nodes
and renderers together; since higher layers will also have access to
the renderer instance, this does not add any burden to callers.
Additionally, if memory measurements indicate that we are spending too
much time in the allocation of new render nodes, we can now easily
implement a free-list or a renderer-specific allocator without breaking
the API.
We need a virtual function to retrieve the GskRenderNode for each
widget, which is supposed to attach its own children's GskRenderNodes.
Additionally, we want to maintain the existing GtkWidget::draw mechanism
for widgets that do not implement get_render_node() — as well as widgets
that have handlers connected to the ::draw signal.
And replaces its usages in GtkTextView/GtkStyleContext with a hard-coded
0.04 which was the default value for cursor-aspect-ratio. Also remove
the public gtk_draw_insertion_cursor which used draw_insertion_cursor
which in turn looked up cursor-aspect-ratio
And with it, gtk_widget_get_visual() and gtk_widget_set_visual() are
gone.
We now always use the RGBA visual (if available) and otherwise fall back
to the system visual.
The cursor was set using gdk_window_set_cursor() even in
gdk_window_new().
So instead of having yet another flag, just make the users of that flag
call gdk_window_set_cursor() directly after the window was created.
X11 was the only backend to support it and people can just override it
using XSetClassHint() directly.
The docs already advertised the function as "Do not use".
Keep the existing call to XSetClassHint() in place, so that we keep
setting the same values as in GTK3.
Setting the shadow width earlier as done with commit 4cb1b96 to address
bug 771561 proved to cause unexpected side effects on size_allocate
signal propagation.
As the window is sized correctly earlier, the size_allocate signal is
not emitted again in gtk_widget_size_allocate_with_baseline() which
prevents clutter-gtk from relocating its child widget correctly.
To avoid this issue, revert commit 4cb1b96 but make sure the values
passed as min and max size is never negative in Wayland as this is a
protocol error.
With this, the min/max size will be wrong for a short amount of time,
during the state transition, until the shadow width is updated from
gdk_window_set_shadow_width().
This approach is much safer and less intrusive than changing the
size_allocate logic in gtk.
This reverts commit 4cb1b9645e.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=771915
Otherwise, with CSD, we could have a discrepancy where gtk uses the
right values for the shadows whereas the gdk backend still uses the old
values, leading in some cases to invalid or negative min size being
computed (which, in Wayland, leads a protocol error).
https://bugzilla.gnome.org/show_bug.cgi?id=771561
The main corpus of the documentation for gtk_window_get_size() is still
full of X11-isms, so we should port it to something that is more
backend-agnostic. Additionally, having some examples would be nice for
application authors looking at a way to appropriately use this function.
Introduce a private API meant for abstracting how to get a handle
of a window that can be shared with other processes. The API is
async, since some implementations will require that. Currently,
only X11 is supported, which doesn't.
Based on a patch by Jonas Adahl.
This matches the behaviour of Mutter, Metacity and traditional X11
window managers on the window manager side, and is what we want
for at least gnome-terminal. I can't think of any reason why we'd
want incremental resize in any other tiled window.
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=760944https://bugzilla.gnome.org/show_bug.cgi?id=755947
If we have an application that never goes idle (or takes a long time to
go idle), the close buttons in CSD decoration don't work properly.
While it's not clear why the usage of an idle was added in the first
place, keep on using it to avoid unexpected reentrancy problems, but
change the priority to G_PRIORITY_DEFAULT.
https://bugzilla.gnome.org/show_bug.cgi?id=768485
This partly reverts 9f5b9c0e07, which
removed the check for GtkWidget-window-dragging in the multipress
gesture. This check is still needed for widgets which have this style
property set (e.g. menubars and toolbars) can maximize the window on
double click -- but those widgets which have it set to FALSE shouldn't
maximize the window.
GtkHeadeBar checks the window type hint to determine if the regular
buttons such as menu, maximize or iconify should be visible in the
header bar.
However, an application may very well use a "normal" toplevel window and
set it transient and modal afterwards. In such a case, the iconify
button would remain visible, and the user can hide the window, but being
a modal, the parent window would remain insensitive.
Check for the window type, modality and transient relationship to decide
whether or not the regular toplevel buttons should be visible in the
header bar.
https://bugzilla.gnome.org/show_bug.cgi?id=767052
glade-previewer places a gtkwindow inside another toplevel gtkwindow,
updating the shadow width for the client induces a busy loop where the
parent will grow continuously until it crashes gnome-shell/mutter.
To avoid the loop, do not update the shadow width if not dealing with a
toplevel window.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=761651
Commit cdc580463e made it so that
unresizable windows can't be smaller than a set default size but it
lost the logic to ensure these windows remain at least big enough to
comply with their requisition.
https://bugzilla.gnome.org/show_bug.cgi?id=764174
While this commit was found to make emacs windows shrink (and it was
reverted in the gtk-3-20 branch for that reason), that was the only
observed breakage, while the reversal broke several of our unit tests.
Closer study of the emacs sources revealed that it does some really
unsupportable things like doing its own X event handling behind GTK+'s
back and freely mixing sizes of GtkWindows and GdkWindows obtained in
various ways. I've filed a bug against emacs with suggestions for how
to avoid the shrinking window, regardless of this commit.
Original commit message:
It seems this branch is not needed anymore. It was originally added in
1999 to support gtk_widget_realize(), but all those reasons seem
obsolete today.
Instead just call gtk_widget_realize().
If you end up at this commit when bisecting:
There is no bug that made me remove this code, it was purely meant to be
cleanup / dead code removal. I seem to have introduced a new bug or
bisecting wouldn't have let you here. So it seems we should just revert
this commit.
Some other widget might have mapped and raised another child window of
the toplevel in the meantime, causing the popover window to be covered.
Raise the popover window to avoid the issue.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763627
Some applications set both a default size on their gtk window and a size
request on the corresponding gtk widget.
Until now, the default size was ignored for fixed size windows, so this
had no effect and remained unnoticed, but with the recent change for
client-side decorations, the default size is now used even for fixed size
windows, which can cause the resulting fixed size window to be much
smaller than expected with the size request.
For fixed size windows, if we have both a size request and a default
size set, prefer the size request as before.
https://bugzilla.gnome.org/show_bug.cgi?id=763749
commit c3dc0d80f1 fixed the behavior of
GtkContainer widgets requesting an IMMEDIATE resize-mode.
However, GtkWindow has been stomping on resize-mode during realize()
since commit addcc64b9c. The combination
of factors that led to this not being a visible problem during all this
while is uncertain, but this now causes the Shell to continuously try to
relayout its ShellEmbeddedWindow (a GtkWindow subclass).
This commit separates the resize-mode as set internally by GtkWindow
from the one set with the external API, so that GtkWindow only changes
it when it had not been set before by the subclass.
https://bugzilla.gnome.org/show_bug.cgi?id=763650
This makes toplevels pseudo-transparent wrt this mimetype, so if
the drag source offers this mimetype and not another that was
managed by the destination-side widget hierarchy, the window will
be an acceptable target for this mimetype, allowing it to trigger
whatever is meant to in the source side.
https://bugzilla.gnome.org/show_bug.cgi?id=763387
Under Wayland, popovers use subsurfaces, and we end up getting
configure events for these delivered to the toplevel they're in.
To avoid triggering resize loops, ignore configure events that
are not for the toplevel window itself.
https://bugzilla.gnome.org/show_bug.cgi?id=763351
One important aspect of non-resizable windows that we need to preserve
is that they shrink when their content requires less size.
Previous changes to allow the default size to be applied to fixed size
windows would have prevented all fixed size windows from shrinking when
their content requires less size.
Allow shrinking for fixed-size windows unless a default size was
specified.
https://bugzilla.gnome.org/show_bug.cgi?id=762974
Previous commit to address the default size introduced a regression
with fixed size windows if no default size was given, the resulting
window would end up much smaller than its actual content.
If a window is not resizable (with gtk_window_set_resizable ()),
the size given with gtk_window_set_default_size() is ignored.
The solution to this would be to use gtk_widget_set_size_request() but
that's a GtkWidget API and therefore does not take into account the
client side decorations when in use with GtkWindow.
Refactor the code so that gtk_window_set_default_size() (which is a
GtkWindow API) gives the expected result on non-resizable windows as
well.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762974
Will make GTK+ more willing to use CSD for all normal windows without
being asked to. Lack of desktop composition will, of course, prevent
it from using CSD (in theory).
GTK_CSD=0 will force CSD to NOT to be used whenever
possible (i.e. in cases where CSD is not specifically requested
by a window, by design).
https://bugzilla.gnome.org/show_bug.cgi?id=759899
We connect to the titlebar widgets change notification regardless
whether it is internally created or not, so don't make the signal
handler disconnection conditional on that either.
Presently, Gtk will only send a startup notification completion message
for the first window that is shown. This is not good for the case of
GtkApplication, where we are expected to participate in
startup-notification for all windows.
We have avoided this problem by manually emitting the startup complete
message from after_emit in GtkApplication.
Unfortunately, this causes problems for windows that are shown with a
delay. It is also a dirty hack.
The reason for the original behaviour is simple: there is a static
boolean in gtkwindow.c which controls it. We remove this.
Instead, clear the startup notification ID stored in GDK when sending
the completion message. GtkApplication will re-set this the next time
an event comes in which needs startup-notification handling. In the
non-GtkApplication case, newly shown windows will still not send the
message, since the cookie will have been cleared.
Finally, we remove the hack from GtkApplication's after_emit.
This will probably cause some regressions in terms of lingering startup
notification messages. The correct solution here is to always use
gtk_window_present(), including when merely opening a new document (with
a new tab, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=690791
Quite a few applications use GTK_WINDOW_POPUP to create various
temporary windows and place then on screen. That works fine on X11 but
on Wayland there is no global coordinate system for regular surfaces.
If the application is using a gdk temp window and set a parent with
gtk_window_transient_for(), the gdk wayland backend has all it needs to
create a subsurface that can be placed at will by the application.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759738
67ab00e01e removed the fake configure code in gtk_window_show() and
replaced it with a simple gtk_widget_realize(). The initial allocation
code in realize() only allocates the natural size or the last requested
size which now no longer is set, resulting in a too small first allocation.
This builds a configure request to compute the allocation size instead
which includes default size, CSD etc..
This problem could be seen in case of a GtkPaned in a GtkWindow with a
default size set and the pane position set as well. The first allocation
would be the natural size of the GtkPaned which would clamp the pane
position if too larg. Only the second allocation would fill the parent
window using the now wrong pane position.
https://bugzilla.gnome.org/show_bug.cgi?id=759705
When clicking "Cancel" on the "Do you want to use GTK+ Inspector?"
dialog, unregister the update_debugging idle handler. Also, steal
reference to 'inspector_window' while gtk_destroy_widget(), to make
further gtk_window_update_debugging() calls as a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=759764
Instead of having old and new style, now have a GtkCssStyleChange opaque
object that will compute the changes you are interested in for you.
This simplifies change signal handlers quite a bit and avoids lots of
repeated computation in every signal handler.
Since we're no longer doing geometry widgets, don't send
base size and increments to the window manager anymore either.
This avoids an ugly 2 pixel gap to the right and bottom of half-tiled
terminals under gnome-shell.
Applying the client-side decorations in the configure routine greatly
increases the chances of having the right size for the GtkHEaderBar and
border shadows.
Yet, it may be possible that these sizes change at a later point in
time, if for example the GtkHeaderBar grows in height while adding new
controls.
Mention this possible pitfall in the documentation for
gtk_window_resize().
https://bugzilla.gnome.org/show_bug.cgi?id=756618
Just like we did for the default size, that reduces the chances of
having the headerbar missing or wrongly sized when computing the client
side decorations controls.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
It seems this branch is not needed anymore. It was originally added in
1999 to support gtk_widget_realize(), but all those reasons seem
obsolete today.
Instead just call gtk_widget_realize().
If you end up at this commit when bisecting:
There is no bug that made me remove this code, it was purely meant to be
cleanup / dead code removal. I seem to have introduced a new bug or
bisecting wouldn't have let you here. So it seems we should just revert
this commit.
Widgets such as gtkfilechooser may be saving their size and position on
the unmap callback, if the client-side decoration header bar is removed
first, the reported size will be wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
Fix a regression introduced by:
commit 6866d1c widget: Make gtk_widget_queue_allocate() not resize
Where the dropdown menu in Firefox would not be relocated after the
toplevel window is moved.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=758609
Just like it happens for window dragging, we're likely to not see the
matching button release for this event, so we must reset the controller
manually here.
https://bugzilla.gnome.org/show_bug.cgi?id=758661
Before calling gdk_window_move_resize(), store the full configure
request, not just width and height.
Fixes firefox randomly losing position of its dropdown windows.
https://bugzilla.gnome.org/show_bug.cgi?id=758609
Before the resulting window size would differ if the default size was set
before adding a headerbar vs after. Now the saved state is again the actual
requested size and it is adjusted at the time we request a window size.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
GtkHeaderBar will not show the maximize button if the window in not of
type normal or not resizeable.
Use the same restriction for double-click actions as well.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=757530
An application may use gtk_window_get_size() to retrieve the current
window size and later reuse that size with
gtk_window_set_default_size().
gtk_window_set_default_size() and gtk_window_get_default_size() should
also take client side decorations offset into account.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
Getting the shadow width must not call gtk_style_context_set_state()
because that will invalidate the node and cause a style-updated emission
which can cause gtk_widget_queue_resize() calls.
And calling queue_resize() from get_preferred_size() essentially means
the size is permanently invalid because you invalidate it while
querying it.
This causes flickering of windows when going from/to backdrop state. To
avoid this we either need to fix the theme to not have different shadow
sizes in those cases or we need to ensure the window doesn't flicker in
the first place.
At the time gtk_window_move() or gtk_window_resize() get called, there
is no way to predict if a popup window will actually draw its shadow, so
applying an offset in this case may end up with a wrong size or
positioning for such windows.
Changing the logic in gtk_window_should_use_csd() as previously done to
address that issue will cause some other breakage as popup windows may
not draw a shadow but still need CSD.
So best is to actually apply client side decorations offset for regular,
top level windows only. This is actually a lot simpler and safer and
less likely to cause additional breakage.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
git commit a5b1cdd0 introduced a regression where CSD windows are not
resizable with metacity.
Reason being that metacity does not support "_GTK_FRAME_EXTENTS" and
therefore gtk_window_supports_client_shadow() would always return FALSE.
This explains why it works with window managers which support
"_GTK_FRAME_EXTENTS" such as mutter/gnome-shell or xfwm4.
Partially revert commit a5b1cdd0 to reinstate the logic in
get_shadow_width().
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=757805
The list of popovers will specify the stacking order, a
_gtk_window_raise_popover() private call has been added so popover
widgets can request being on top.
Also, the stacking on popovers is ensured on gtk_window_size_allocate(),
after the size/stacking changes on the child widget have finished, this
will ensure popovers are kept on top of window contents.
https://bugzilla.gnome.org/show_bug.cgi?id=756670
Previous commit 305b34a "GtkWindow: fix move/get position with CSD"
introduced a regression because some windows presumably use shadows but
actually don't, resulting in a negative offset being wrongly applied.
Problem is that get_shadow_width() would return non-zero shadows even
for windows that have no shadow, thus causing the negative offset.
Fix the logic in get_shadow_width() and gtk_window_should_use_csd() so
that get_shadow_width() returns accurate values.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
This commit toggles the big switch. We now don't run size_allocate()
from the toplevel up anymore in cases where we don't need to.
Things might be broken in subtle ways as a result of this commit. We'll
have to find them and fix them.
Widgets that already have a resize queued don't need to walk the whole
parent chain and queue another resize. It's enough to do it once per
resize.
This also means that sizegroups cannot use the shortcut of just
invalidating the first widget in the group anymore. That widget might
already have a resize queued while others don't.
Ignore the geometry widget passed to gtk_window_set_geometry_hints().
Usind the widget itself was a hack that complicates the size request
machinery.
It is also incorrect in that it doesn't respect height-for-width.
Last but not least, it was only used by gnome-terminal and that
application can easily work without it.
Take into account and compensate for the size of the client side
decorations widgets in gtk_window_move() and gtk_window_get_pos()
including gravity.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
When client side decoration is used, the size passed to
gtk_window_resize() or retrieved from gtk_window_get_size() for top-
level windows also accounts for the client side decorations widgets
such as the title bar or the shadow borders.
Add up the size of these additional controls to the given size to get
the size expected.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
If a window is decorated, we need to draw the frame and shadow, even if
it is app-paintable - it's just nonsense to have a frame that we handle
events on, but expect the app to paint it. (We paint the titlebar in
any case.) If a client wants to handle all painting, it should use an
undecorated window.
https://bugzilla.gnome.org/show_bug.cgi?id=756886
Make it what it is - the enum - so that that it is sure that the hint
will fit in the field. Without this, any hint that doesn't fit in 3
bits will be truncated to the 3 least significant bits, causing
unexpected behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=756496
Once a window is maximized/fullscreen, resize increments should be
ignored otherwise the window may appear smaller than the screen size.
That also applies to configure requests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=751368
Check whether the given popover even changed size in
_gtk_window_set_popover_position. If not, just move its GdkWindow
without calling gtk_widget_queue_resize. Using popover_get_rect here is
still relatively costly, but popover_size_allocate would be doing that
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=755435
To GtkGesture machinery, if an event triggers a controller/gesture signal,
and gesture reset/cancellation as a result, the event has been managed
after all.
Commit e3bd895667 effectively changed the return value of the
wrapping gtk_event_controller_handle_event() function, which broke some
paths (eg. gtk_popover_button_press() wouldn't while the GTK+ grab was
active for this reason because the button press event was consumed early
on gtk_window_check_handle_wm_event()).
That patch is not too off-track given potential child widgets' behavior,
we want nonetheless to distinguish the denied vs cancelled paths here
(because GtkWindow itself relies on the GtkGesture behavior described in
the first paragraph on the begin_move/resize paths), so just reset
gestures after the event has already gone through the GtkEventController
so the return value is unaffected.
Traditionally a sequence is set to GTK_EVENT_SEQUENCE_DENIED state when
it is to be ignored, which means it is dormant, but still managed by the
gesture (accounting, "denied" sequences still make "slots" in multitouch
gesture busy, etc...).
This gesture will run for all button presses and releases in the window
though when presses happen on the "window content" region, and we can't
account for every children to be as educated as setting the proper mask
on every window, or ensuring events will be propagated as they should.
In order to cater for this, just reset the gestures, we can live without
such accounting in these specific GtkGestureSingle gestures.
https://bugzilla.gnome.org/show_bug.cgi?id=754098
This reverts commit 3eacfa88f2.
Apart from the patch not being correct, we don't want to expose private
structures in header files if we can avoid it.
And this type-checking overhead is not an optimization that is even
measurable.
https://bugzilla.gnome.org/show_bug.cgi?id=754932
Instead of queueing a new idle handler every time we call
gtk_window_update_debugging(), only queue one if none is queued that.
Saves a lot of work, in particular when templates create context menus
for every row in a large listbox as in the gtk-demo listbox example.
This ensures that windows appear in the inspectors tree when
they are created, and it prevents GTK_DEBUG=interactive from
coming up with an empty object tree.
https://bugzilla.gnome.org/show_bug.cgi?id=752664
The previous fix was falling into the crack between
realized and mapped - we would apply the state when a window
is just realized, then unset the _initially flag, and then
when the window gets mapped, we'd undo the state. To fix
this, go back to the way things were when these flags were
first introduced.
https://bugzilla.gnome.org/show_bug.cgi?id=752765
Go back to use these variables only for pre-mapped state changes.
Their use got muddied over the years, and it was hard to keep track
of what is acutal state, and what just a queued request.
1. This confuses the code as it's using the old type hint with the new
type hint on GDK window creation
2. It only existed as a workaround for old code that directly accessed
window->type_hint which hasn't been possible since 3.0.
This behavior has been made optional on add_popover() time, text handles
will keep being able to overflow the window, in order to allow text
selection on views too close to the window edge.
Regular GtkPopovers are reinstaurated to the previous size positioning
logic though, that is, limited by the visible area of the window.
Under Wayland, fullscreen/maximized windows may not cover the entire
area when a size increment is specified.
Ignore size increments for fullscreen/maximized windows just like most
window managers do under X11 so that windows with size increments can
still be fullscreen or fully maximized under Wayland as well.
https://bugzilla.gnome.org/show_bug.cgi?id=751368
Since 740bcf5, we use these properties to properly compute shadow widths
for unmapped windows. If a client calls gtk_window_maximize and a window
manager unmaximizes a window, we should draw borders, so we need to
reset these when we get the property notification.
This queues an unnecessary resize on the toplevel, and is not needed
anymore, now that GtkWidget does not call
gtk_style_context_set_background() on the window's GdkWindow anymore.
The WM isn't aware of O-R (popup) or offscreen windows. If somebody
maps an offscreen or a popup GTK+ window before the main window, we'll
complete the sequence before a "real" window is mapped. Make sure to
ignore these for startup notifies.
Don't add the container border to the title request size; it
is only used for the child widget.
Don't call gtk_widget_get_preferred_width_for_height() for
the title bar with an unrelated height and subtract the title
bar height before querying the child widget width.
Guard against negative size requests after substracting the
borders/shadows and the title bar.
https://bugzilla.gnome.org/show_bug.cgi?id=751341
In the non-CSD case we checked for 0x0 window size requisition
and replaced it with 200x200 so the window was still visible.
This no longer works in case of CSD as the shadow and title bar
are always added to the requisition resulting in a titlebar/shadow
only window in case there is no child widget (this is currently
visible under wayland or when setting GTK_CSD=1).
Instead of special casing the final window size, special case
the child requisition paths instead. This gives us the same
requisition in both, CSD and non-CSD cases (the header bar
has a too large minimum width atm so the resulting window is
still not the same)
https://bugzilla.gnome.org/show_bug.cgi?id=751341
This error resulted in warnings like
"pixman_region32_init_rect: Invalid rectangle passed"
In case the window is smaller than handle_size * 2 the resulting
edge window got a negative size. Prevent that by limiting the
handle size to half the respective edge length. This also
prevents the corner windows from overlapping in case the window
is too small.
The old should_use_csd() function would return FALSE if the GTK_CSD
environment variable is unset; the change in commit c5e5ee6749
made it return TRUE if GTK_CSD is unset. This has a cascade effect
on the window size, which causes invalid rectangles to bubble down
to Pixman.
https://bugzilla.gnome.org/show_bug.cgi?id=751140
This will be the widget that the popover relates to (::pointing-to in
GtkPopover, ::parent in GtkTextHandle).
Additional API to check the popover/parent relationship between widgets
has been added, which will be useful wherever this is necessary in a
generic manner.
https://bugzilla.gnome.org/show_bug.cgi?id=750993
The change in 03213b9509 changed the rules
as to when CSD can be enabled, but it also unconditionally enables CSD
with the implicit assumption that client-side shadows were the real
issue, and that we could work around that by drawing our own borders.
This also means that setting a titlebar for a GtkWindow will enable CSD
unconditionally.
In reality, some window managers (like Matchbox) *only* support
server-side decorations, and will ignore all hints to the contrary, to
the point of drawing decorations at random locations on top of the
window.
Since CSD are enabled unconditionally, the GTK_CSD environment variable
is also not a suitable escape hatch.
In the grand tradition of asking ourselves if we should do something
just because we can, we should split the environment checks from the
checks on what the user requested; by doing that, we can also check
when enabling client-side decorations, and ideally bail out if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=750343
Even if a window doesn't support client side shadow
(gtk_window_supports_client_shadow returns FALSE), don't assume the
shadow width is zero, as CSD may have been enabled anyway (meaning
priv->client_decorated is TRUE). In that case we still need to report
the correct width.
https://bugzilla.gnome.org/show_bug.cgi?id=749451
If CSD is enabled with shadow even though it "shouldn't"*, the width
should still be calculated correctly. This fixes a regression caused by
b1e5ad469c.
* gtk_window_should_use_csd () returns false
https://bugzilla.gnome.org/show_bug.cgi?id=748615
The window state 'client_decorated' will only be set the window is being
realized. If anyone tries to get the shadow size before that it'd get
the with as if there always was no shadow.
This avoids negative sized opaque regions caused by the allocation being
smaller than shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=748615
Requires Vista and newer.
* Create surfaces with cairo_win32_surface_create_with_format
* Provide an rgba visual that can be distinguished from the system visual
* Make rgba visual the best available visual
* Enable alpha-transparency for all windows that we control
* Check for appropriate cairo capabilities at configure time
(W32 - 1.14.3 newer than 2015-04-14; others - 1.14.0)
* Check for composition support before enabling CSDs
* Re-enable transparency on WM_DWMCOMPOSITIONCHANGED
Windows that were created while composition was enabled and that were CSDed
as a result and will look ugly (thick black borders or no borders at all) once
composition is disabled.
If composition is enabled afterwards, they will return back to normal.
This happens, for example, when RDP session is opened to a desktop where a GTK
application is running. For W7/Vista windows will only re-gain transparency after
the RDP session is closed. For W8 transparency will only be gone momentarily.
Windows that were created while composition was disabled will not be CSDed
automatically and will use SSD (WM decorations), while windows that are CSDed
manually will get a thin square border.
If composition is enabled afterwards, these windows will not change.
This is most noticeable for system menus (popup menus are often generated
on the fly, system menus are created once) and some dialogues (About dialogue,
for example).
https://bugzilla.gnome.org/show_bug.cgi?id=727316
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
To calculate the shadow width, we look at the value of priv->fullscreen
and priv->maximized.
Those fields will have the actual value only after GTK receives back a
window state event though, so they will be wrong in _realize(). Look at
priv->fullscreen_initially and priv->maximize_initially too, to avoid
the size changing right after realize, which would make the window
flicker if maximized at startup.
https://bugzilla.gnome.org/show_bug.cgi?id=747808
It turned out that using mwm hints to instruct wms to
create border-only decorations is not really working
universally. So, instead of doing this, render a solid
frame without shadow on the client-side to handle this
case.
https://bugzilla.gnome.org/show_bug.cgi?id=746222
Signed-off-by: Olivier Fourdan <fourdan@xfce.org>
On popover_unmap(), perform the gtk_widget_unmap() call last, so the
GtkWindowPopover data is ensured to be alive throughout the function
if the popover widget is destroyed right on ::unmap.
https://bugzilla.gnome.org/show_bug.cgi?id=745829
Now that this is split in two separate gestures, both must be reset
when the WM grabs the pointer. Also, do on resize drags like on move
drags, and claim the gesture before resetting, so the ownership is
properly transferred across any other widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=745969
This reverts commit fb9a6bb6d8.
In a recent test, I've found that Xfce and Mate now support
this, so they will not be affected by this requirement. And
adding the check back will solve the 'client-side shadow'
problem in KDE.
Postpone until the last moment whether the target widget still
potentially uses updates from this sequence, or window dragging
actually applies because all gestures on the target went to denied
state.
This fixes window dragging on empty space in a headerbar that is
contained in a paned (as in e.g. gedit).
https://bugzilla.gnome.org/show_bug.cgi?id=745562
The gesture is hooked to the capture phase, so it works for buttons in
header bars and whatnot. In order to be friendly to the widget it is
capturing events from, an ugly hack is in place to avoid capturing
events when the target widget has a gesture that would consume motion
events.
is_visible() wasn't the right check to perform here before unmapping,
and gtk_widget_unmap() already avoids being doubly called by checking
gtk_widget_get_mapped() anyway.
If the grab belongs elsewhere, the window won't claim the sequence right
away. The sequence may still be claimed afterwards when window dragging
starts, but simple clicks won't be consumed this way.
This makes it possible to close popovers when clicking on the title region,
while still permitting touch/button 1 interaction for every other purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=743257
On the wayland backend, set up GDK_WINDOW_SUBSURFACE windows
for popovers. In the popover code, the popover-relative-to-parent
calculation had to be tweaked, and it's been made to always prefer
the given popover position, since there's no sizing limitations.
https://bugzilla.gnome.org/show_bug.cgi?id=738891
Currently we only take into account the window GActionGroup for
activating the accels.
However, the application could have some custom GActionGroup in the
chain of focused widgets that could want to activate some action if
some accel is activated while that widget is focused.
To allow applications to set accels on widgets that use custom
GActionGroups, simply use the muxer of the focused widget, which
already contains the actions of the parents.
https://bugzilla.gnome.org/show_bug.cgi?id=740682
This event might not have an action yet, but certainly accounts, and
should be triggering recognition.
This fixes a crash when attempting to drag CSD windows through touch. As
since cfaec2d2f5, gtk_gesture_single_get_current_sequence() would
rightfully return NULL if the gesture didn't enter recognition, making
event lookup fail.
Under wayland, the compositor doesn't have a 'overall window alpha'
knob, we just need to add the alpha to the buffers we send.
Client-side alpha, if you want to call it that.
Implement this by reusing the existing alpha support for non-toplevel
widgets. As a side-effect of the implementation, windows with RGBA
visual under X will now also use per-pixel alpha, instead of
overall alpha.
When the window is on a non-default screen, popover_realize
ended up passing a visual and a parent_window from different
screens into gdk_window_new, which doesn't work. Fix it by
using the visual of the parent window.
When a new screen is set on a window, we unrealize it, to
recreate all the resources. But we don't reset the client_decorated
flag, so realize() doesn't call create_decoration() - which makes
sense, since the decoration already exists. But the side-effect
of create_decoration() is to select the rgba visual, and visuals
are per-screen.
Fix this by looking for the rgba visual in set_screen(), and
replacing it with the rgba visual for the new screen, if necessary.
When gtk_window_set_titlebar (win, NULL) is called, we were taking
an early exit and forgot to re-map the window. This does not normally
happen in practice, but glade is about to get a 'csd' switch which
lets one toggle back and forth between titlebar and no titlebar.
If the menubar has an app-menu popover, and it is shown at the time of
disposing the window, it will attempt to transfer focus back to the
previous focus widget when undoing modality, even though the dispose()
code already did set_focus(NULL) previously.
At the time the popover is removed, there aren't many hints as to whether
the toplevel or the focus widget are being destroyed (ie. not still under
in_destruction), so just swap the order of these two calls.
For every other popover, this would all happen within dispose/destroy,
which is handled better.
Binding signals can return a boolean indicating whether they
handled the event. Use that here and return FALSE if the
inspector keybinding is disabled.
Instead of hardcoding these actions, consult the settings.
Note that not all of the actions supported by gnome-shell are
implemented here, only maximize, minimize, lower, and menu.
https://bugzilla.gnome.org/show_bug.cgi?id=729782
