According to the ICCCM spec [1], one should subtract the base size from
the window size before checking that the aspect ratio falls in range.
This change fixes shrinking Firefox Picture-in-Picture windows when
running KDE Plasma (with KWin as the window manager).
[1] https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.2.3
This is a neverending story. I was seeing problems in tests where
the nested mainloop was picking up unrelated timeouts.
Break down and make this async. This changes the ordering in which
the (de)serializers are registered. If this is causing issues, we
can introduce priorities or something else.
According to XDND "The XdndLeave message cancels the session.",
issue one when cancelling a drag, so the dest side has an opportunity
to forget about the GdkDrop.
The drag source might be cached and held alive, only disposed after
future drag begin operations. Ensure the drag surface gets hidden
properly or might might stay transparent but mapped till then.
We were always adding ASK to the list of possible
actions, and preferring it. This was causing the
ask cursor to show up when both the source and
the target support ASK, even though it is only
meant to happen if you hold the Alt modifier.
Instead, use one of the supported actions as
preferred action.
When creating a new GdkDrop object on drag_enter, take pending
source_actions and action into account. The code to store the
pending actions was already there, they were just not passed
on to the drop object when we create it.
We need to set the drag to NULL in gdk_wayland_drag_drop_done,
otherwise, all future drags will be considered local after the
first local one. Worse, they will also provide the wrong data.
The GdkDrop emit... apis take root coordinates.
That should be changed to surface coordinates,
eventually. For now, make the functions fill
the x, y fields.
Don't store coordinates as shorts. Use doubles,
as everywhere else. Also add x, y in addition
to x_root, y_root, and actually return those
in gdk_event_get_coords.
When a new popup surface is created, it may end up
getting a resume-events signal from its frame clock
without having seen a flush-events first.
Don't unpause events in that case, since it messes
up the displays pause counter.
This was causing criticals with tooltips.
Otherwise the icon "jumps" to the cursor position with its top left when
the animation starts.
This is especially visible if the dragged item is big, like when dragging
mails in Thunderbird.
We use a compilation symbol in our build to allow the inclusion of
specific headers while building GTK, to avoid the need to include only
the global header.
Each namespace has its own compilation symbol because we used to have
different libraries, and strict symbol visibility between libraries;
now that we have a single library, and we can use private symbols across
namespaces while building GTK, we should have a single compilation
symbol, and simplify the build rules.
The existing xdg-shell protocols do not support minimization in a way
that allows us to implement the GdkSurface API; the only minimization
operation does not come with a state notification, nor it comes with
a way to undo itself.
Closes: #67
The "iconified" state is mostly an X11-ism; every other platform calls
this state "minimized" because it may not involve turning a window into
an icon at all.
Using gsettings for this information does not work
in sandboxed scenarios, where settings are per-app.
Since the Wayland protocol provides this information
nowadays, just drop the old code for reading
the gsettings.
The event may end up freed after delivery, ensure to keep a ref in order
to emit the matching emulated crossed event matching a proximity event.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
The code managing this accounting mixed seat and tablet output lists,
can't bode well. Fixes invalid reads on list elements, as there are
dangling pointers.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
This is the Vulkan version of eglSwapBuffersWithDamage(), and
it's always a good idea to limit the number of pixels we're
pushing to the GPU and/or swapping into the display.
This is a requirement for using VK_KHR_incremental_present.
Vulkan Wayland drivers translate the VkPresentRegionsKHR to
wl_surface.damage_buffer(), which a v4-only request.
When calling gdk_wayland_surface_export_handle(), if we pass
some 'user_data' but no 'destroy_func', GTK4 crashes. That's
because in xdg_exported_handle() we are unconditionally calling
destroy_func -- even when it's NULL.
Fix that by checking if there's a destroy function before calling
it.
Fixes https://gitlab.gnome.org/GNOME/gtk/issues/2179
The xdg_output.done event is deprecated in xdg-output v3, so clients
need to rely on the wl_output.done event instead.
However, applying the changes on the fist wl_output.event when using
xdg-output v3 may lead to an incomplete change, as following xdg-output
updates may follow.
Make sure we apply xdg-output events on wl_output.done events with
xdg-output v3.
https://gitlab.gnome.org/GNOME/gtk/issues/2128
Previously, the manufacturer property of the GdkMonitor was NULL,
and having at least PNP id at GdkMonitor.manufacturer makes it
possible to distinguish between different monitors programmatically.
xdg-output v3 marks xdg-output.done as deprecated and compositors are
not required to send that event anymore.
So if the xdg-output version is 3 or higher, simply set the initial
value `xdg_output_done` to TRUE so we don't wait/expect that event
from the compositor.
https://gitlab.gnome.org/GNOME/gtk/issues/2053
Windows/surface's aren't supposed to be explicitly moved by any external
part, so don't provide API for doing so. Usage throughout Gdk is
replaced by the corresponding backend variants.
The generic layer still does the heavy lifting, leaving the backends
more or less just act as thin wrappers, dealing a bit with global
coordinate transformations. The end goal is to remove explicit surface
moving from the generic gdk layer.
To separate how toplevels and popups are configured, a first step is to
introduce a resize-only vfunc for backends to implement. It's meant to
only configure toplevel windows, i.e. popups. Currently it's used for
both types, but introducing the resize-only API is a first step.
Configuration should happen in response to the xdg_surface.configure
event, not in the events that preceeds it. Do this by making all
configured state pending until the committing "configure" event. Also
split up toplevel vs popup configuration in a more clear way.
When unreffing the stream from a different thread, the close function
will schedule its cleanup asynchornously in the main thread.
We need to make sure the stream object stays alive for as long as
that hasn't happened, so ref() it.
Fixes#2003
Instead of the toplevel driving popups, have the popups listen to the
frame clock themselves. Otherwise, if the toplevel for some reason isn't
drawn by the compositor and stops drawing new frames, popups wouldn't
get painted either.
To make a frame clock tick as long as any of the associated surfaces
expect to receive ticks, make the surfaces inhibit freezing the clock,
instead of directly tell the frame clock to freeze itself.
This makes it so that as long as any surface using a certain frame clock
is not frozen (e.g. just received a frame event from the display
server), the frame clock will not be frozen.
With this, the frame clock is initiated as frozen, and won't be thawed
until any surface inhibits freeze. It will be frozen again, when every
surface has that previously inhibited freeze uninhibited freeze.
The xdg_output v2 interface has a `name` property that reflects the
output name coming from the compositor.
This is the closest thing we can get to a connector name.
The migration from GdkScreen's monitor API to GdkMonitor left out a way
to get the connector's name of a monitor.
While there's no real guarantee coming from the underlying graphics
system that the connector's name is stable, some system components may
use it to uniquely identify a monitor until the next plug in/out event.
This gives us marks to track the duration of processing certain types of
GdkEvent. It also provides some basic struct information in cases where
having that information would likely be useful for debugging.
The Wayland backend has a hack to work around
a race with popover mapping: If the surface size
changes before the initial configure, we hide and
show the surface. Unfortunately, the code was doing
this in a way that is externally observable (by
listening for surface state changes), and popovers
were observing it and hiding themselves in response.
Avoid this by not going through the GDK frontend
code for this.
1) In the SetWindowPos() function (and the WINDOWPOS struct) the
"hWndInsertAfter" argument/field means the window that will be
directly above after the change, not the window that will be
directly below. MSDN says "precedes" for SetWindowPos(), but
WINDOWPOS documentation is more precise: this is the window
behind which the affected window will be placed. Apparently,
Z-axis goes back-to-front.
Therefore, logging should be reworded correctly.
2) When we switch away from the application and then switch back
to a transient window, we need to bring up its transient-owner
(and its transient-owner's owner and so forth) as well,
otherwise our transient (modal) window might be transient for
something that might not be visible.
3) When we bring up a window, we should bring all of its children
(popup windows) on top of it.
Because Windows doesn't provide a function to bring one window
on top of the other, we have to work around this by calling
SetWindowPos() twice, swapping the windows between the calls.
Similar to previous removals of g_cclosure_marshal_VOID__VOID we can remove
other marshallers for which are a simple G_TYPE_NONE with single parameter.
In those cases, GLib will setup both a c_marshaller and va_marshaller for
us. Before this commit, we would not get a va_marshaller because the
c_marshaller is set.
Related to GNOME/Initiatives#10
This uses the new sysprof-3 ABI to implement the capture writer. It also
uses the statically linked libsysprof-capture-3.a that is provided with
Sysprof for the capture writing to ensure that we do not leak any symbols
nor depend on any additional libraries.
The GTK_TRACE_FD can be used to pass a FD for tracing into Gtk. Sysprof
uses this when the Gtk instrument is selected for recording.
If we set c_marshaller manually, then g_signal_newv() will not setup a
va_marshaller for us. However, if we provide c_marshaller as NULL, it will
setup both the c_marshaller (to g_cclosure_marshal_VOID__VOID) and
va_marshaller (to g_cclosure_marshal_VOID__VOIDv) for us.
Root coordinates are going away, so this
api does not make sense anymore. Use
gdk_surface_get_device_position instead.
We still keep this as internal api for
root-coordinate using backends.
The X backend was storing global coordinates
in surface->x/y, and keeping the parent-relative
positions in its own fields. Switch this around
to store the relative position in x/y, as is
expected by the frontend.
This function returns the position relative to
the surface parent, so will always return 0 for
non-popups. The out arguments don't need to
allow-none either - nobody passes NULL for these.
We maintain offsets for popups, so we can translate
coordinates between surfaces that are attached directly
or indirectly to the same toplevel. Add an api for that.
CSS does not do exponents, so printing numbers close to 0 as 1.234e-15
does not work.
Also up the accuracy to 17 digits because that's what everyone else
uses.
GTK4 doesn't have WS_CHILD windows anymore, so hWndParent argument
to CreateWindowEx() is always interpreted as the owner window,
not the parent window.
A window with an owner:
* is above the owner in Z-order
* is destroyed when the owner is destroyed
* is hidden when the owner is minimized
This is enforced by the OS.
GTK can only allow this for popup windows.
Desktop window must never[0] be an owner.
[0]: https://devblogs.microsoft.com/oldnewthing/20040224-00/?p=40493
Popups can't be active or inactive, so emitting GDK events
in response to WM_ACTIVATE makes no sense for these kinds
of GDK surfaces.
The jury is still out on whether we should block (return 0)
or ignore (don't return anything) this message.
Blocking WM_NCACTIVATE (which we currently ignore) is definitely
not an option - it completely breaks input somehow.
1) Handle GDK_SURFACE_POPUP in RegisterGdkClass()
(for now pretend it's the same as GDK_SURFACE_TOPLEVEL)
2) Remove useless code from GDK_SURFACE_TOPLEVEL case in _gdk_win32_display_create_surface()
(now there's just GDK_SURFACE_TOPLEVEL there, no need for a type check)
3) Have a separate case for GDK_SURFACE_POPUP and ensure that
it doesn't get WS_CHILDWINDOW (and neither should GDK_SURFACE_TEMP).
There is no need for popups to connect to the frame
clock to pause and unpause events on the display -
the toplevel already does it.
And don't connect to paint either - handle paint
on popups recursively.
Somewhat change the order of initialization (to be closer
to what Wayland backend does).
Also remove the wrapper field that is no longer needed -
it used to hold a pointer to the main GdkWindow instance,
which wrapped GdkWin32ImplWindow. Since impls are gone,
nothing is wrapping anything anymore.
Fix a substitution error, where wrong pointer was added
to the hash table. Added a comment to ensure that future readers
(including myself) won't be confused by the fact that we're
inserting a pointer instead of the handle itself.
Since we are now sharing frame clocks with multiple
surfaces, we can no longer dispose them unconditionally
when a surface goes away. Only do it if we are a
toplevel (without parent).
This was showing up as criticals on exit when opening
and closing any popover in widget factory.
Now that popups share the frame clock of their
parent, we have to be much more careful about
freezing the clock, since that may stop updates
for another surface.
This commit makes two changes that make the
X11 handling of the frame clock more similar
to the Wayland backend:
- Use gdk_surface_freeze_updates instead of
gdk_surface_freeze_toplevel_updates to avoid
affecting the frame clock
- Bail out early in before_paint/after_paint
if the surface is frozen, to avoid affecting
the frame clock
Together, these two make the X11 popup surface
type work without freezing updates for the toplevel.
With separate clocks, the phases are not coordinated,
which messes with GTKs size allocation machinery treating
the entire widget tree as a whole, and causes us to
run into assertion where popups get drawn before they
are allocated.
This api is meant to mimic xdg-popover.grab - we
show the surface, and dismiss it when we get events
on other surfaces. For foreign surfaces, the compositor
handles that for us; for our own, we check outselves
before delivering events to GTK.
Make them use o-r windows, and move
with their parent.
We do a sort-of ok job on stacking order
here - whenever the parent window gets a
ConfigureNotify, we just restack all popups
directly on top of their parent. This is good
enough to keep popups on top of their parent
while we drag it around, and it gets the popup
to disappear when raising another window on
top of the parent.
Store popup parents separately from transient-for
parents, since these are separate concepts with
different behaviors. And we need the parent in
the frontend, so we can use it in the fallback
move-to-rect implementation.
We don't need the complicated wrapper system anymore,
since client-side windows are gone. This commit moves
all the vfuncs to GtkSurfaceClass, and changes the
backends to just derive their surface implementation
from GdkSurface.
We want to use a gdk_surface_new_popup for popups,
and align the constructor names with the surface
types, so rename
gdk_surface_new_popup -> gdk_surface_new_temp
gdk_surface_new_popup_full -> gdk_surface_new_popup
The temp surface type will disappear eventually.
All the information in it is already contained
in the surface object we pass along, and none
of the backend implementations were using the
attributes at all.
We are not creating such surfaces anymore, and
they were only ever meaningfully implemented
on X11. Drop the concept, and the api for determining
if a surface is input-only.
We still need to keep the vfunc around, since the
fallback implementation of gdk_display_get_monitor_at_surface
uses it. So, a GDK backend must either have root coordinates
or always return a monitor from monitor_at_surface.
We still need to keep the vfunc around, since the
fallback implementation for move_to_rect uses it.
So, a GDK backend must either have root coordinates
or implement move_to_rect.
