Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 5.13 integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I3dcd963b1c5cea0b2197f1589398d8a9ed18f46f
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. As stated in the docker docs, you might get errors when
attempting to connect to a machine or pull an image from Docker Hub.
For instance, Error checking TLS connection: ...
The solution is to regenerate TLS certificates of docker machine after
machine resums.
Change-Id: I8781ac0f0790aeda6cc778aee9c44d03c2b788d3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QTextFormat::setAnchorName()/anchorName()
- QTextList::isEmpty()
Change-Id: Ic1f5317980d116c846def3645d2a6cd61ba8679d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Windows and macOS, the containers are deployed into a virtual
machine using the host network. All the containers share the same
hostname (qt-test-server), and they are connected to the same network
domain (local).
When running test in such platforms, use the single-name SSL certificate
(qt-test-server.local) for SSL related tests.
Change-Id: Idf33e01e8dd8814510d848b87b59b5fc0edc903e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemDelegate::comboBox() is flaky because sometimes the used
QTableWidget does not yet have the focus which prevents a correct
editing. Fix it by explictily setting the focus on the widget after it
is shown.
A similar fix was added for dateTimeEditor() in
9822d57d85.
With this patch the test no longer fails for my on opensuse, therefore
remove the blacklisting.
Task-number: QTBUG-67282
Change-Id: I907db662ca347f8e8d31e5be215a100377b159ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Non-local ASM labels break for this test when compiled with clang.
Change-Id: I15bd250a991c3b03bbc88459a6358090bd157444
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
COMPOSE_CONVERT_WINDOWS_PATHS is supported by Docker and available
for you to configure the docker-compose command-line behavior. It
enables path conversion from Windows-style to Unix-style in volume
definitions. Users of Docker Machine and Docker Toolbox on Windows
should always set this to true.
Change-Id: Ib59756ad68482fdd889ce39ab1ab0118b5fc9071
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently only available for the OpenSSL backend to use but doesn't
actually rely on anything OpenSSL specific.
Move it so it can be used by the Schannel backend in an upcoming patch
Change-Id: Ia29b153bf3f29cff0d62a41ec5dd7d4671a18095
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While it's not common it still occurs, perhaps especially with 127.0.0.1
Can be tested by attempting to connect to https://1.1.1.1/ using Qt.
Change-Id: Idad56476597ab570b8347236ff700fa66ab5b1f4
Fixes: QTBUG-71828
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change b86d0b6215 rearranged the
sequence of function calls when generating code adding QTabWidget
and QToolBox pages, not taking into account that the iconCall()
has a side effect (writing out icon definition) Revert that part
and add a comment.
Fixes: QTBUG-72980
Task-number: PYSIDE-797
Change-Id: Ie8fbaa36f21cd4408fb1f491195da5c260708e6c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Docker compose file supports variable substitution. When running
docker-compose up, Compose looks for the environment variables from
shell and substitutes the values at runtime.
Change-Id: I5255ead82276fac7db24ee74af453f83ca20bbe6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no docker bridge on Windows. Docker document recommends using
port mapping to connect to a container. The problem is that it causes a
port conflict if the user is running a service that binds the same port
on the host. This change applies the same solution of macOS to deploy
the docker environment into VirtualBox and use the host network option.
Task-number: QTQAINFRA-2294
Change-Id: Iedcb8daa39373f02adb59f02eae2775f02870c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adds support for Schannel, an SSL backend for Windows, as an
alternative to OpenSSL.
[ChangeLog][QtNetwork][Ssl] Added support for Schannel on Desktop
Windows. To build Qt with Schannel support use '-schannel' during
configure.
Task-number: QTBUG-62637
Change-Id: Ic4fb8ed3657dab994f9f4a4ac5cbddc7001a0a46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The cursor test sometimes fails due to the fact that the topLevel widget
has not yet reached it's fullscreen geometry. This means the
QGraphicsView is to small and the test will fail.
Avoid it by simply removing the topLevel widget since it's not used at
all.
Change-Id: Ia7b34f283a917a35b6665e6333a01378575a5a04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The bool is assigned on the previous line: QTRY_VERIFY will not do
anything because the statement is already true.
Change-Id: I067290e19ffd100819b2b631af431c6013623a00
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was an implicit effect before which stopped working after
dec7961709. Reintroduce it as some
projects used this side-effect as a way to abort the initial
highlighting.
Change-Id: I5340ee9882a242bc8b5f7f843f1cfe793a65d357
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When debug_and_release option is in use, qmake will generate one
mata-Makefile and two additional leaf Makefile (Makefile.Debug and
Makefile.Release). In such case, testserver.pri will be included in all
three passes. The problem is that the mata-Mafile is used to invoke leaf
Mafile recursively. The docker test server should only be integrated in
the leaf Makefile.
To resolve this problem, this change uses "!build_pass" condition to
determine whether this is a pass of meta-Makefile, and then skip it.
Change-Id: Ibc48d657680e089ebaa1bc356b87eb4cfd9f4580
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using the overload of QCoreApplication::processEvents that takes a
maxtime argument, the function will keep processing events until there
are no more events, or until it times out.
The problem is that the function doesn't distinguish between events that
were on the event queue when the function was called, and events generated
by processing events as part of its own execution. If for example a widget
calls update() in its paintEvent, the function will spin for the entire
duration of maxtime.
That doesn't work for qWaitFor, where we need to check the predicate
between each pass, so we use the overload of processEvents that doesn't
take a maxtime. That's fine, as we have our own timeout logic.
Change-Id: I9738d7d0187c36d4a5ddfcd3fd075b0bd84583c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as we normally do in other tests, using localhost.
Change-Id: I7969d7bfd50b545adae7e23476d17b6224e9a8fc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests of smb protocol only work in the CI network. Therefore,
the docker-based test server for Windows can't pass all the tests of
QNetworkReply.
These two tests should be reworked when adding Samba server to the
docker-based test servers later on.
Task-number: QTBUG-72861
Change-Id: I54e639b5414760ee929d0d28fe10f9e021aff7dc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As the mnemonic has no meaning when it is in a dockwidget title, we
should just treat it as a literal ampersand instead and display it
as such.
Fixes: QTBUG-54485
Change-Id: I96c856ce2771a68d226f48f8f47affc24f1c53cd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This allows anticipating and reusing internal allocations of
QPainterPathElements instead of using the common `m_myPath = QPainterPath{}` pattern.
[ChangeLog][QtGui][QPainterPath] Added clear(), reserve(), capacity().
clear() removes allocated QPainterPath elements but preserves allocated memory, which can be
useful for application with complex paths that are often recreated. reserve() and capacity()
follow QVector semantics.
Change-Id: I763461e2a421feda9053d3eb512af2fcf07ade2b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The refactoring of dnd with f8944a7f07
added a regression which results in a need to reimplement
dragMoveEvent() on the drop side. Before this change it was possible to
accept the dnd in dragEnterEvent() without again accepting it in
dragMoveEvent().
Fix it in a similar way it's done in
QGuiApplicationPrivate::processDrag() by prefilling the first simulated
QDragMoveEvent with the values from the previous QDragEnterEvent before
it is sent to the drop receiver.
Fixes: QTBUG-72844
Change-Id: I1300dd02b7f1d9dcd44ecefa8335f92ad6c6cafa
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit c1fc47b06a.
CI is now running on 18.04 hosts and vmx is enabled on that level.
As the update in QTQAINFRA-2288, the macOS 10.13, openSUSE 42.3
and Ubuntu 18.04 had vmx enabled inside the VM.
Change-Id: I6ec4094ca826418f46f417b3cab89678bb089417
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The keyboard search in QAbstractItemView did not handled Key_Space
because this is also an edit trigger. It was also consumed if no edit
was started.
This patch changes this behavior and triggers the keybaord search when
the editing was not started.
Fixes: QTBUG-48505
Change-Id: I58e0d283f863c9b12ac5d2f6171f15522bd7c30a
Reviewed-by: David Faure <david.faure@kdab.com>
The keyboard navigation did not consider the disabled state when trying
to find the new index under all circumstances. This lead to a
non-working PageUp/Down/Home/End navigation when the first or last item
was disabled or hidden.
Fix it by explicitly checking if the calculated item is hidden/enabled
and skip it in this case.
Fixes: QTBUG-44746
Fixes: QTBUG-34832
Change-Id: Ifa3b64a405e67b792db5db9d186d426fcfe183fb
Reviewed-by: David Faure <david.faure@kdab.com>
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
Since QSqlDatabase::database() cannot be used to access another database
from another thread, then the overload is provided to make it possible
to clone with just the connection name. This will handle the cloning
internally safely then.
Fixes: QTBUG-72545
Change-Id: I861cc5aa2c38c1e3797f6f086594a1228f05bada
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When eliding text we would check for the existence of the ellipsis
character and fall back to using the dot if it was not available.
However, when font merging was in use, we would also use ellipsis
from a fallback font if available. This could cause the metrics
of the text to increase if the fallback font had larger metrics,
and the result was that text could shift when elided.
It is better to prefer the dot from the current font than to use
the ellipsis from a fallback, so we only use the ellipsis if
it is in the main font.
[ChangeLog][QtGui][Text] Fixed a bug where eliding text could
change the height of its bounding rectangle for certain fonts.
Fixes: QTBUG-72553
Change-Id: Ib27fc65302465ddce661801bcc5ae32e55f1aeb9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
since we'll refuse to continue with a handshake, failing in initSslContext()
on a disabled protocol versions. Then, functions like waitForEncrypted,
connectToHostEncrypted, startServerEncryption and startClientEncryption
should either bail out early (who needs a TCP connection which we'll
abort anyway?) or bail out whenever we can, as soon as a disabled protocol
was found in a configuration. This change also makes the behavior
of different back-ends consistent, since it's a general code-path
that reports the same SslInvalidUserData error. Update auto-test to
... actually test what it claims it tests.
Task-number: QTBUG-72196
Task-number: QTBUG-72179
Change-Id: I548468993410f10c07ce5773b78f38132be8e3e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The keyboard navigation with MovePageUp/Down and MoveEnd did not honor
disabled cells in all cases which lead to inconsistencies in the
navigation (esp. since MoveHome does honor them correctly).
Therefore make sure that all four move operations work consistent by
refactoring the code to use common functions.
Fixes: QTBUG-72400
Change-Id: I63fa3b626510d21c66f4f9b2b1bfb3261728ecaf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
C++11 added the new enum class key as well as enum struct. While the
former is likely the most known and used, the later can be used in the
same contexts and with the same effects.
Currently moc doesn't parse enum struct while it does for enum class.
This patch fixes this.
[ChangeLog][moc] moc now parses enum struct the same way as enum class
therefore that keyword can be used with the Q_ENUM macro as well as
Q_FLAG and Q_DECLARE_FLAGS.
Change-Id: Iaac3814ad63a15ee4d91b281d451e786b510449c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per RFC 6176 (2011) and RFC 7568 (2015).
Code-wise, we're left with the decision of what to do with a few
enumerators in QSsl::Protocol; I've made TlsV1SslV3 act as TlsV1,
and adjusted the description of AnyProtocol.
A new test was introduced - deprecatedProtocol() - to test that
we, indeed, do not allow use of SSL v2 and v3. protocol() and
protocolServerSide() were reduced to exclude the (now) no-op
and meaningless tests - neither client nor server side can
start a handshake now, since we bail out early in initSslContext().
[ChangeLog][QtNetwork][SSL] Support for SSLv2 and SSLv3
sockets has been dropped, as per RFC 6176 (2011)
and RFC 7568 (2015).
Change-Id: I2fe4e8c3e82adf7aa10d4bdc9e3f7b8c299f77b6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There was a comment in the code that said:
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
It's not clear what that was referring to, but in its current state,
a slider with invertedControls set to true will not behave as expected:
pressing the left arrow key will decrease its value instead of increasing it,
and vice versa for the right arrow key.
As stated in the documentation (and by its name), invertedAppearance only
controls the appearance of the slider, and not the effect of key events.
Remove the comment and use invertedControls instead.
Change-Id: I13296cbda9244413978ef0d7f0856065f74fd0bf
Fixes: QTBUG-25988
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Don't do several tests at once in the test function. Instead, move
the extra tests to the data function. This makes it possible to easily
add a self-contained test (i.e row) for an upcoming fix.
Task-number: QTBUG-25988
Change-Id: I65c8d7620f01107f8f59c96896b1a641d97f5fdc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add a lookup for the affected enum values and use the names instead.
Task-number: PYSIDE-797
Change-Id: I6be166409000aff83d9465c9a3b2f37b44c5c085
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This solution is composed of two features:
1) C++ code generated by RCC uses two symbols exported from QtCore that
are only present if the feature was compiled in. If the feature was not
compiled in, this will cause a linker error either at build time or at
load time (if they were functions, the error could be at runtime).
2) Binary files generated by RCC have a new header field containing
flags. We're currently using two flags, one for Zlib and one for
Zstandard.
This means we now have binary RCC format version 3.
Change-Id: I42a48bd64ccc41aebf84fffd156545fb6a4f72d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Insufficient memory was allocated when asking GetDIBits() to convert to 32bit.
Fix allocation size and use a QScopedArrayPointer.
Fixes: QTBUG-72343
Change-Id: I45f79c913a243316e01bc6efed08e50ccc7d25f4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Changed 0 to nullptr, used more C++-style casts, simplified some
code for searching a button, and changed foreach to range-based for
loop.
Task-number: QTBUG-44131
Change-Id: I211b12751b0e2591d1d14294c31b51d52bb4e3f6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the QTreeWidget functions is/setFirstItemColumnSpanned() to
stay in sync with the other deprecated functions
(selected/expanded/hidden) so they can get removed in Qt6.
Also add a small unit test for them.
Change-Id: Ie1cb5d7163c2d56d653c21e841ccaf7d38569787
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the widget to which the scroller was assigned is deleted, the
QScroller ought to be deleted too, to avoid filtering events and then
following a dangling pointer while trying to react.
Fixes: QTBUG-71232
Change-Id: I62680df8d84fb630df1bd8c482df099989457542
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Robert Griebl <robert.griebl@pelagicore.com>
Verify that it does cut in after the specified time has elapsed.
Task-number: QTPM-1385
Change-Id: Ib18e8d6af28339f79cca4d62b869287ce07b8cc1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Match the environment tst_selftests.cpp uses for subtests more
faithfully. Extends b22e50acda. In the process, tweak how crashers
are handling, in preparation for the watchdog test.
Change-Id: I09a046460f6f3bff0b12069fad6c1437d89572ce
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
One test for bad data for the column, another for a bad QFETCH.
Incidentally extend blacklist testing by blacklisting them.
Reorganise a QEMU condition that needed extended as part of this.
Task-number: QTPM-1385
Change-Id: Iac72ada19760321c5c9264ddfff7740d1fdd0700
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Currently, a tile rearrange will move the active subwindow (if any)
to position zero (top-left). This ignores any tiling order set via
setActivationOrder(). This change removes this move so that the set
tiling order is respected when a tile operation is performed.
Fixes: QTBUG-43356
Change-Id: I2c481f0ffe45e42e811c6b6d476eb4cb65aa5d1f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch introduces a private 'API' to enable server-side OCSP responses
and implements a simple OCSP responder, tests OCSP status on a client
side (the test is pretty basic, but for now should suffice).
Change-Id: I4c6cacd4a1b949dd0ef5e6b59322fb0967d02120
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QListWidget::(is|set)Item(Selected|Hidden)() are deprecated for a long
time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I4567e740f1ebb5841b2e5b50c601fb83a782950c
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QMdiAreaPrivate::resizeToMinimumTileSize() does not take into account
scroll bars when calculating the minimum size for the QMdiArea widget.
As a result, if scroll bars are enabled or showing during a tiling
operation, the top-level widget incorrectly expands in size (instead of
utilizing the scroll bars). Therefore, we should only resize the
top-level widget if scroll bars are disabled.
Fixes: QTBUG-40821
Change-Id: I3a8b7582d23fdf12d2b09f3740eea6b60bb395c3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To unlock dev branch, we need to disable the Docker-based test server on
Linux for short-term. With this change, we can force update the SHA-1 of
docker images in both qt5 and qtbase. During this transitional period,
the Linux platform should keep using the remote test server.
Change-Id: I4c07abf36154382e5d667ca733901b6d7fda9677
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Fix clang-tidy warnings:
- Use range-based for and streamline some code
- Use nullptr
Change-Id: Iad43490d0e968baa76d54d3bf81558a48b19cdbd
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix deprecation warnings - replace qFindChild/Children() with
QObject::findChild/Children() and replace some 0 with nullptr.
Change-Id: If2f01d12fa91d09d98a61f73b0449a6773ac93db
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
MD4C now makes it possible to detect indented and fenced code blocks:
https://github.com/mity/md4c/issues/81
Fenced code blocks have the advantages of being easier to write by hand,
and having an "info string" following the opening fence, which is commonly
used to declare the language.
Also, the HTML parser now recognizes tags of the form
<pre class="language-foo">
which is one convention for declaring the programming language
(as opposed to human language, for which the lang attribute would be used):
https://stackoverflow.com/questions/5134242/semantics-standards-and-using-the-lang-attribute-for-source-code-in-markup
So it's possible to read HTML and write markdown without losing this information.
It's also possible to read markdown with any type of code block:
fenced with ``` or ~~~, or indented, and rewrite it the same way.
Change-Id: I33c2bf7d7b66c8f3ba5bdd41ab32572f09349c47
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
So we add the QTextDocument::ResourceType::MarkdownResource enum value to indicate
the type. QMimeDatabase is generally unable to detect markdown by "magic", so we
need to use the common file extensions to detect it (the same extensions as declared
in the mime database XML).
Change-Id: Ib71f03abd535c17e5a8c99bd92d0a6062e972837
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's necessary to make the test pass on certain platforms.
Change-Id: I717d492df437c0ffb75b21d9ef23ce602160fad1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We have a problem. Our types don't play well with the std unordered
containers, because they do not specialize std::hash. We therefore
force our users to come up with an implementation, hindering
interoperability, since any two developers are unlikely to come up
with compatible implementations. So combining libraries written by
different developers will result in ODR violations.
Now that we depend on C++11, and thus the presence of std::hash, we
still face the problem that the standard does not provide us with a
means to compose new hash functions out of old ones. In particular, we
cannot, yet, depend on C++17's std::hash<std::string_view> to
implement std::hash<QByteArray>, say. There's also no std::hash for
std::tuple, which would allow easy composition by using std::tie().
So piggy-back on the work we have done over the years on qHash()
functions, and implement the std::hash specializations for Qt types
using the existing qHash() functions, with a twist: The standard
allows implementations to provide means against predictable hash
values. Qt has this, too, but the seed is managed by the container and
passed to the qHash() function as a separate argument. The standard
does not have this explicit seed, so any protection must be implicit
in the normal use of std::hash.
To reap whatever protection that std library has on offer, if any, we
calculate a seed value by hashing int(0). This will be subject to
constant folding if there's no actual seed, but will produce a value
dependent on the seed if there is one.
Add some tests.
A question that remains is how to document the specialization. Can we
have a \stdhashable QDoc macro that does everything for us?
Task-number: QTBUG-33428
Change-Id: Idfe775f1661f8489587353c4b148d76611ac76f3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If any non-breakable content (such as a link) already went past
80 columns, or if a word ended on column 80, it didn't wrap the rest of
the paragraph following.
Change-Id: I27dc0474f18892c34ee2514ea6d5070dae29424f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When reading a document like
# heading
- list item
and then re-writing it, it turned into
# heading
- # list item
because QTextCursor::insertList() simply calls QTextCursor::insertBlock(), thus
inheriting block format from the previous block, without an opportunity to
explicitly define the block format. So be more consistent: use
QTextMarkdownImporter::insertBlock() for blocks inside list items too. Now it
fully defines blockFormat first, then inserts the block, and then adds it to
the current list only when the "paragraph" is actually the list item's text
(but not when it's a continuation paragraph). Also, be prepared for applying
and removing block markers to arbitrary blocks, just in case (they might be
useful for block quotes, for example).
Change-Id: I391820af9b65e75abce12abab45d2477c49c86ac
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The tests of QNetworkReply keep failing due to VT-x is not available in
Coin environment. The VT-x/AMD-v feature is necessary when starting the
virtual machines. Before VT-X is added back to the CPU features, the
macOS platform should keep using the remote test server.
Task-number: QTQAINFRA-2288
Change-Id: Ib37d0e7a5fb1fb4ed5484f925f5023b19467e672
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Adds a test case for 199f9c5448.
Task-number: QTBUG-59310
Change-Id: Iee26f8bc21884da36471935f64524b62c3f79ff4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Certain fonts with multiple styles have the same family name. When
loading these as application fonts we were not specific enough when
querying for the text metrics. This meant that e.g. the bold version in
a font family would get the metrics of the regular one.
Fixes: QTBUG-67273
Change-Id: Ic988d62cddde0a1f77ddcaf2891cadc21c9b31e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
You cannot manipulate variables in custom target dependencies, so the
following code was invalid:
i386_d.depends = EXPORT_VALID_ARCHS=i386
In order to still build the fat binary, we split the project in four,
one for each architecture, plus one to create the final package.
Change-Id: If08cf54e2e4098a7e10df41b7ea8d2bf699f58be
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a focus frame is set around a widget that exist inside a
QAbstractItemView, both the focus frame and the widget will
be scrolled when the table is scrolled (since the focus frame
is a child of the view). The result is that after the widget
has been scrolled (which will move the focus frame to the
correct position as well), the focus frame will be scrolled
next, and therefore away from the widget.
This patch will catch this case by always adjusting the
focus frame position when someone tries to move it. Trying
to move the focus frame away from the widget it tracks
will anyway be flaky.
Fixes: QTBUG-63877
Change-Id: Ic2aacc4fafc219280e32092c258a7539d0db9cd0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It would crash if there is no screen at 0,0.
Change-Id: Ic84d75b3d8b917fe3696530cbe843e82923ba676
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The previous implementation leads to infinite chain of showing/hidden
line edit under circumstances described in QTBUG-54676. We basically got
the situation when size hint were calculated differently depending on
the line edit visibility state. In this case toolbar layout have to
show/hide extension button and line edit a lot of times and can never
leave this "loop" (please note, that the chain is much more complicated
in reality):
Resize toolbar -> Set layout geometry -> Size is OK to display line edit
-> Set layout geometry -> Hide extension button -> Set layout geometry
(wrong size is calculated here, so "run out of space") -> Hide line edit
-> Set layout geometry -> Show extension button -> Set layout geometry -
> Size is OK to display line edit ... And we're in the "loop"
Clear button is hidden if there is no text in a line edit.
In the previous implementation, the button was always visible, only
opacity was changing in order to "hide" the button. It resulted to
incorrect size hints (regular and minimum).
In the current implementation the button is really hidden/shown, and
size hints calculated correctly.
Also updated unit test for line edit.
Remove code duplication in functions for calculation text margin
Fixes: QTBUG-54676
Change-Id: I4549c9ea98e10b750ba855a07037f6392276358b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
This will be the only options for Qt 6, so make sure the code compiles now.
Change-Id: I23f791d1efcbd0bd33805bb4563d40460954db43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary to provide details for the key too,
when the server is using DHE-RSA-AESxxx-SHAxxx.
Amends 7f77dc84fb.
Change-Id: I8ab15b6987c17c857f54bc368df3c6c1818f428c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
keyboardInputInterval() is 400ms by default which slows down the
testcase without a good reason.
Set it to 100ms which speeds up the testcase from 20s to 10s on my
system.
Change-Id: Ib883c5d3f09f8e896ae56a8fc8df2233be63de01
Reviewed-by: David Faure <david.faure@kdab.com>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QGraphicsProxyWidget::setWidget() is checking if the newly assigned
widget is already assigned to a child proxy widget without checking if
the child has a widget assigned at all which lead to a nullptr reference
if it is not the case.
Therefore check if the assigned widget is a valid pointer.
Fixes: QTBUG-15442
Change-Id: I006877f99895ca01975bdcad071cfcf90bea22ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows and WinRT only have on event dispatcher class so that failing
test cases in one test will most likely also happen in the other.
Change-Id: Ib047c6870e6e02f3cf8deaaa6e438ed0ac7e2d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Fix some clang nags (QFileInfo::exists(), raw string literals).
- Update the version numbers in the baseline to be 5.12 consistently
to make future modifications easier.
- Introduce another environment variable to redirect the diff
output to stderr. This can be used to generate a diff for applying
when making larger changes to uic.
Task-number: PYSIDE-797
Change-Id: I3f6716f0fe8e5939f6bef3965d90b2bb2c37f4c4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Replace the generation of #ifdef's for the macros by QT_CONFIG
checks. Implement it using streamable classes to make it easier
to switch the output language later.
Task-number: PYSIDE-797
Change-Id: I28b5ed3ec80cd525a3df0cd54d9be4f09149cde4
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Including 4f7ad5ec44
to make appimage not ambiguous
Change-Id: I8db13fc785b267c09667ef38430bf98135c7f0d6
Reviewed-by: David Faure <david.faure@kdab.com>
We document being able to parse more than 8-bit per color, but were
ignoring everything after the first 8 bits.
Change-Id: Ic85ab04b0836e6979a623e294eebd5084c1a9478
Fixes: QTBUG-71373
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QTBUG_7714_fullUpdateDiscardingOpacityUpdate2() would fail when
it moved to another screen if there is one to the left.
Change-Id: I3f8edc04c31dffc5a3bd005d9e5170dd68151df7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QTreeWidget::(is|set)Item(Selected|Hidden|Expanded)() are deprecated
for a long time but not marked as such. Therefore explicitly mark them
as deprecated so they can get removed with Qt6.
Change-Id: Ie4971350de61326811e0788df0d359ed3c442869
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView::initializeSections() was calling updateHiddenSections()
with wrong parameters which lead to an inconsistency in the hidden
section handling.
updateHiddenSections() needs the first and last index which got removed.
Therefore we must pass the new section count for logicalFirst.
Fixes: QTBUG-55461
Change-Id: Ica06125cf19bdd500f55fd9cd59ace1795f3703f
Reviewed-by: David Faure <david.faure@kdab.com>
When calling setDocument (directly or through the constructor) a delayed
rehighlight is initiated. Previously, if any text was changed before
this rehighlight could run it would cancel the rehighlight, even if the
changed text only caused a new block of text to be highlighted.
Fixes: QTBUG-71307
Change-Id: Ib09b664d90906f5b4427105f0e45469806f3a779
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since the comma character was originally used as a separator, we
need to extend QFont to have setFamilies() so that we can avoid
joining the family strings together. This enables us to see the
family name as a single string and for multiple family names,
we have families().
Subsequently, this has added functions to QTextCharFormat to
account for multiple font families too. So it is now possible to
set a single one directly with setFontFamily() and multiple ones
with setFontFamilies().
This also bumps up the datastream version to 19 as QFont now
streams the families list as well.
[ChangeLog][QtGui][QFont] Add setFamilies()/families() to aid using of font families with commas and quotes in their name.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 19 to account for changes in the serialization of QFont.
Fixes: QTBUG-46322
Change-Id: Iee9f715e47544a7a705c7f36401aba216a7d42b0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By accident, when we erroneously tried testing TlsV1_3 on macOS with
SecureTransport (which does not support TLS 1.3) we hit this quite
subtle problem: it can happen that a server-side socket is never
created but a client (after TCP connection was established) fails
in TLS initialization and ... stops the loop preventing
SslServer::incomingConnection() from creating its socket. Then we
dereference nullptr.
Task-number: QTBUG-71638
Change-Id: I8dc5a4c53022a25aafe2c80a6931087517a48441
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Remove the conditional inclusion of DTLS versions, they made difficult
and unnecessary ugly adding new protocols (something like TlsV1_2OrLater + 4).
2. OpenSSL 1.1.1 first introduced TLS 1.3 support. OpenSSL 1.1 back-end is
compatible with OpenSSL 1.1.1, but would fail to extract/report protocol
versions and set versions like 'TLS 1.3 only' or 'TLS 1.3 or better' on a
new context. Given 1.1.1 is deployed/adapted fast by different distros,
and 5.12 is LTS, we fix this issue by introducing QSsl::Tls1_3 and
QSsl::Tls1_3OrLater.
SecureTransport, WinRT and OpenSSL below 1.1.1 will report an error in case
the application requests this protocol (SecureTransport in future will
probably enable TLS 1.3).
Saying all that, TLS 1.3 support is experimental in QSslSocket.
Done-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Done-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4a97cc789b62763763cf41c44157ef0a9fd6cbec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows a user to efficiently watch for services with a common
domain prefix.
This is exposed in the API via a wildcard character in the service name.
For example creating a watcher on "org.mpris*" will match
"org.mpris.foo" "org.mpris.bar" and "org.mpris" itself. It will not
match org.mprisasdf.
Internally the argument match rules have been expanded from a single
QStringList to a struct containing args and arg0namespace. This was done
so that we can easily use argpath in match rules in the future.
Change-Id: I55882ab603cc6ba478e8c0ea9a6800f6e483a50c
Reviewed-by: Kai Uwe Broulik <kde@privat.broulik.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This avoids memory allocation and data copying in e.g.
QObject::property().
Detected by heaptrack's "Temporary allocations" counter in an
application using the breeze widget style (many animations).
Change-Id: Iabdb58a3e504cb121cce906ef707b0722de89df6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented a new proxy model to transpose the source model.
Rows will become columns and vice-versa.
Both flat and tree models supported.
[ChangeLog][QtCore] New class QTransposeProxyModel to
swap rows and columns of the source model.
Change-Id: I902963c6b81aa0f63b5ad2bddca538f28b565084
Reviewed-by: David Faure <david.faure@kdab.com>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The tests would rely on the window manager giving it focus a bit too much.
Change-Id: I1b28def2c95a4f0a9665a7cf6e0c14db03df98d5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QSqlQuery::bindBool() did not check if the bool is correctly bound
as part of the WHERE statement. Add a new test to query for the bool
column and check if there is exactly one row returned.
Fixes: QTBUG-38891
Change-Id: I0bd1ceb1b30e50f67f44f5b06d68683195b78b29
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
QTableWidget::isItemSelected/setItemSelected() are deprecated for a
long time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I77fffe2786751306115c3f5da0ef98ff84e35b1a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView/TableView::sortByColumn(int) was deprecated a long time ago
but never got removed. Therefore mark it with QT_DEPRECATED_SINCE(5, 13)
so we can remove it with Qt6.
Also sync the handling of the sort order changes in QTableView with the
one from QTreeView.
Change-Id: I0371d9a9c21116edaa9125835827f1a200075d36
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView only had functions to either expand all items or until a given
depth. What was missing is to expand all subitems for an index
programmatically which is added with this patch.
[ChangeLog][QtWidgets][QTreeView] Added expandRecursively() to expand
all items below a given index
Fixes: QTBUG-10482
Change-Id: I8fc4d50b0b7e90245840c99a0188f13c0670253a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, corrected an inaccurate XFAIL message (an XPASS is
normally an error, unless blacklisting ignores it so turns it into a
BPASS). Added the missing .tap file to its expected output.
Documented the similarity to the silent/ selftest.
Task-number: QTPM-1385
Change-Id: Id74a1353d54af2f3bfe2c764e33c1f051958ab21
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The testlib selftest sets various things in the environment for
crashing tests; the generator for its expected output should set the
same things, as they affect what output is produced.
Change-Id: Iec2ed59982ea1043582573530c33619d8e8ed08e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If the two lines have identical texts, the comparison returns true.
So don't complicate various other conditions on the way there with
filtering out that case; deal with it first so they don't need to.
Change-Id: Iebd230704ce5f53d12d5afa64aab30f83bb9d407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Added operator[] to QCborValueRef and mutating operator[] both there
and in QCborValue. If the value (referenced) is not a container, it
is replaced with a map and a reference into the result is returned.
If the value is an array and the key is a string, negative, or more
than 0xffff, the array is first converted to a map.
Change-Id: Ibbc9e480fb25eb3d05547c8a1b99e762b2a68b68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This way there is only one for loop, which is more optimizer friendly
Change-Id: Iaa02026627d5259c3eea1ff5664e8f22664eef73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before reading the configuration of a docker machine, the machine shall
be created and started. Otherwise, the docker command will complain
about "cannot connect to the Docker daemon".
If the docker machine has not been created, the make check will be
immediately terminated, and then print the error message. If its status
is not running, the machine will be turned on by a start command.
Change-Id: I7f4c322e7bdf29e4e4203e0e1bbc2e5c8cf677be
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some of the enums were cast to int on comparison. That just makes it
harder to know what the values were.
And verifyClientCertificate had 4 cases which were named the same as 4
others.
Change-Id: I09e8e346a6f416236a92073cf9a8f349938d37ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
52f1692b84 introduced a possible fix for
this flaky test. Therefore unblacklist them to see if the change really
fixed the issue.
Task-number: QTBUG-64639
Change-Id: I759d66aac7641505487e88254d16750e87c97350
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ife72db5a0d7cb8abe55c60c519087e2b60f26990
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moc shouldn't artificially introduce calls to possibly overloaded
operator&. It can cause odd side effects in a user code.
Change-Id: Iaa1b491fe6a1a5ebd4dfa1172359dc792cc7604f
Fixes: QTBUG-68191
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the creation of the symbolic link/junction from the _data() slot
into the actual test function. The parameters are passed by a newly
introduced struct. This ensures only the symbolic links/junctions that
are actually needed are created. It can then no longer happen that
filtering for one data row invokes recursive deletion of the mountpoint
junction.
Also use of the newly introduced convenience createSymbolicLink()
in canonicalFilePath()
Task-number: QTBUG-63989
Change-Id: Ia78fd4ad6097136934ab5a375f4c352713d0f115
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add properties enabled_features and disabled_features the respective
library targets.
This makes it possible to query the enabled classes in dependent libraries
(for example, Qt for Python).
Add a test verifying whether the Open GL configuration is reflected
correctly in the feature properties to the existing test_opengl_lib
autotest.
Change-Id: I645c947073dbb36da3be81de6bc62ee0ba1e73d6
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When a QTextCursor survives its QTextDocument, the internal
QTextDocumentPrivate pointer is set to null. There are checks for
this in all the QTextCursor functions to skip out early if such
a QTextCursor is used.
However, when executing the "if (d->priv)" condition in setters,
this will access the non-const operator->() of QSharedDataPointer
and detach the QTextCursorPrivate, and in the copy constructor of
this class, there was an unprotected call into priv->addCursor().
In theory, we could cast all the checks for d->priv to avoid
detaching, but in practice this doesn't matter, since the setters
will typically detach anyway later on.
[ChangeLog][QtGui][Text] Fixed a crash that can happen when calling
a setter on a QTextCursor after its QTextDocument has been deleted.
Task-number: QTBUG-70293
Change-Id: I8f6dc5bb344d1d824f673c0c220b68b7fee237a8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replacing the qmake test with the one corelib/thread/thread.pri uses
for those classes.
Change-Id: Ie803190b821736c89b056ae51b7dfe92046189eb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were handling this properly, but not testing them. I guess we weren't
testing because the condition is a valid intermediate state, so
hasFailure() is correct it returning false.
Testing inspired by the bug reported in
https://github.com/intel/tinycbor/issues/137
Change-Id: Ib47c56818178458a88b4fffd1554ecfdd0af637e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTreeView has a special implementation of keyboardSearch() which is not
consistent to the base implementation regarding the selection behavior:
- currentSelectionStartIndex is not set which results in a wrong
mouse selection behavior afterwards
- only the current index is set but not the current selection
Sync the behavior by calling setCurrentIndex() directly in QTreeView
too.
One problem remains with this patch - the key handling is still
different between QAbstractItemView and QTreeView for repeating key
presses.
Task-number: QTBUG-18862
Change-Id: Ife79d146cf16d6ecbf9f86540777dae15aa1ffb0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Initialize the lastDir properly, to avoid the stroking algorithm doing
direction-change handling for a single line. That could cause a cap to
be painted for a single FlatCap line.
Also fixes a bug in tst_qpainter, revealed by the above fix. The
result drawPolyline was erroneously compared to the result of drawing
the lines individually, for a case where the former correctly paints
the pixel of the join point in the corner, while the latter by
coincidence used to paint the same pixel as a cap because of the bug
above.
Task-number: QTBUG-70101
Change-Id: Ie20eda33214cfe9e7627f17ef4c7a5b3835c9c24
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is already blacklisted for macOS 10.12 and reproducing in 10.13.
Task-number: QTBUG-61037
Change-Id: I464e42d0ae5ab24104250edc69a90454ba605eaa
Reviewed-by: Liang Qi <liang.qi@qt.io>
As the test was unstable, we qskip the failing parts
instead of mark the whole test insignificant.
Task-number: QTBUG-50842
Change-Id: Ib8f5b7ead07d65cc624fa72b190ecee0338c8183
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Instead iterating through all rows to get the number of hidden items,
iterate over the hidden items which are fewer items.
Also don't create a temporary vector with visible flow positions by
remembering the count of hidden items before the working index and
adjusting them appropriately which gives a significant performance
boost when working with a large data set.
[ChangeLog][QtWidgets][QListWidget] Speedup handling of hidden items
when working with large data sets
Task-number: QTBUG-68977
Change-Id: I599b6e97945c245f02229145baad8363ec2bf2f5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
tst_QMdiSubWindow::setOpaqueResizeAndMove checks if a resize of the mdi
subwindow works as expected by simulating mouse events. Those events are
sent to fast and therefore the operationMap of QMdiSubWindowPrivate is
not yet updated which let the test fail. There was already a call to
qWait(250) to wait for the 200ms timer but sometimes (esp. in virtual
environments) the timer was not triggered after this period.
Fix it by checking if resizeTimerId is set back to -1 which means that
updateDirtyRegions() was called.
Change-Id: I961ba80589d2f725a6858ba70b84fb35750a6964
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Both sqlite3_open_v2 and sqlite3_close are documented to return an error code:
https://www.sqlite.org/c3ref/open.htmlhttps://sqlite.org/c3ref/close.html
However, those were ignored (other than checking whether the operation
succeeded), causing QSqlError::nativeErrorCode() to always be "-1" when there
was an error while opening/closing the database.
Additionally, the error string needs to be read (via sqlite3_errmsg16) in
qMakeError *before* d->access is set to 0, or the databaseText() will always be
"out of memory" no matter what error actually happened.
Task-number: QTBUG-70506
Change-Id: I75cbf178c9711442e640afd26c4502214d20c598
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The default values for varchar columns were not decoded properly.
Task-number: QTBUG-46968
Change-Id: Ie13d48c316cd694240f7e287010b97afc8c6c341
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test was computing GMT with a suffix added to it for the offset;
but when the offset is zero there's no need for it. Cleaned up the
logic so that it only checks for a "padded to two digits with zero" if
the number is single-digit (and use string arithmetic in preference to
wantonly complex .arg()ing; and use simpler names). Since we don't
try to check anything unless GMT does appear in the string (because
the actual zone ID was used, instead of GMT with an offset), the case
of zero offset has nothing more to check than that GMT was present,
the precondition for checking anything.
Task-number: QTBUG-70322
Change-Id: I0b8abe7e63d9d72fa9cf32f188b47a78a849044b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
It's not thread-safe so should only be used within systemData()'s
locked code. This eliminates the last callers of it by making it a
local function of the compilation unit, exposing a method from
QSystemLocale() to get round its use of private parts. Make the
constructor for QSystemLocale only stomp its _systemLocale global if
previously unset, but let instantiation still clear
globalLocaleData.m_language_id, so that it can be used as a way to
trigger an update to system locale data.
Change-Id: I908dca9fd30bbf20f42321ab8f9094f2fa37b7b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On platforms where char is signed, like x86, the following is an error
(narrowing conversion):
unsigned char x[] = { '\xc3' };
Change-Id: I495bc19409f348069f5bfffd15518f9ef4e43faf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemView::indexAt() was disabled since Qt 5.0 (and maybe earlier)
maybe due to it's long runtime (15s on my machine).
Speed it up by checking only some special positions inside the visual
rect (borders, center) as it will likely not fail on other positions but
succeed for the ones which get tested.
Task-number: QTBUG-22470
Change-Id: I5c7135757049176f9daca4afc1b7f40c75b9ecd9
Reviewed-by: David Faure <david.faure@kdab.com>
When the first row(s) of a QTableView is hidden, PageUp could not reach
the first visible row because logicalRow(0) is taken without checking
if the row is visible.
Task-number: QTBUG-70215
Change-Id: Ic7820352b8988accb685ea7d16908d3fa8bf2847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
It takes multiple source models and concatenates their rows into a single model.
With full unit tests.
[ChangeLog][QtCore] New class QConcatenateTablesProxyModel, to
concatenate the rows from multiple source models.
Change-Id: Iaf4f325473adef106f423677fdc5ee0e35e87d35
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Otherwise the QGLWidget's context may be owned by and used by the swap
thread when the resize happens on the main thread.
Change-Id: Id415747572e6b988924618b1df0efdee5fcb1805
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Before this fix, QStandardItemModel::itemData returns
a map containing role 255 which is used internally to store the flags.
This role is an undocumented implementation detail so it should
not be returned to the user.
[ChangeLog][QtGui][QStandardItemModel] itemData does not return role 255
Change-Id: Ibead3cba84cfe92b3c664bc8ce87508cbcbdc9bd
Reviewed-by: David Faure <david.faure@kdab.com>
Before this patch QStringListModel::setItemData emitted dataChanged
twice if the roles map contained both DisplayRole and EditRole.
This fixes the duplication.
Increased efficiency of QStringListModel::itemData
Task-number: QTBUG-67511
Change-Id: Ibaea17530f15627a3cb8003e5284e54001731ded
Reviewed-by: David Faure <david.faure@kdab.com>
Implemented the virtual method moveRows to allow row movement.
[ChangeLog][QtWidgets][QListWidget] Implemented moveRows in model
Task-number: QTBUG-69807
Change-Id: I212b560b8778306a0315d9d5e4710efcc7dbbe44
Reviewed-by: David Faure <david.faure@kdab.com>
A virtual method clearItemData was added to QAIM for Qt6.
This patch implements that method to all Qt concrete models for which
it makes sense.
Task-number: QTBUG-69616
Change-Id: If980fcfc36f723128bc56ec4587c5c3a338dbbcc
Reviewed-by: David Faure <david.faure@kdab.com>
This new test double-checks the bugfix for QSortFilterProxyModel::insertRows
in commit 70ba75519d. Previously, when using QComboBox on top of
QSortFilterProxyModel and calling QComboBox::addItem with row==rowCount(),
an empty item was inserted in one place, and then another item was modified
(instead of the inserted empty one). This test checks that the above bugfix
indeed fixes the behavior of QComboBox::addItem when used in this manner.
Task-number: QTBUG-69158
Change-Id: Id01345e0525694a57250c656222d626e2267aa8e
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
There was a QStringView::compare(QString, CaseSensitivity) but it's
good that the symmetric also exists
Change-Id: Ic789f11d41eb8cfa393cb51c19bd1f89bb87d912
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some people suggested the later, so let's have a second look at it
before it's too late.
Although I was in favor of the former I'm now having second thoughts.
connectTo() is meant to only be used in classes which have a clear dominant signal,
but there are rare classes that have two (example: QAbstractButton::toggled, QAbstractButton::clicked).
QAbstractButton::connectTo() would be ambiguous if we ever wanted to add these shorthand connects
to QtWidgets
Change-Id: I198ad3326d31dcf89b9c47a299124572ee7b11b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They were incorrectly attempted to be read as Indexed8, instead use
the RGBA64 formats to read them with full accuracy.
Task-number: QTBUG-45858
Change-Id: I14fc3cb0d59fa2fc0e68fd870f3b32352c34161f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This is marked to be removed in Qt6, so switch to
SE_ItemViewItemCheckIndicator internally and define the old value as
copy of the new one instead of the other way round.
Change-Id: I9e9804a7ff0e9b2ae1e24698d45b2cbd44423420
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
...not just the debug flag. The information is saved outside of the CBOR
map for two reasons:
1) removing the hack that depended on how QCborStreamWriter and
TinyCBOR internally work, allowing for the extra parameter to be
written directly. We wouldn't be able to use that hack anyway and would
have needed a further, uglier hack to encode a byte whose value we
don't know.
2) outside the map, this information can be parsed more quickly and
then we can discard any plugins we shouldn't actually load.
Since we're doing this for a flag, I decided to move the Qt version
there too for reason #2.
Change-Id: I61ecce6b1324410bbab4fffd153d4e5fc696d19e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In preparation for Qt 6 deprecating the binary JSON format. Also reduces
the size of the metadata a little: for the xcb platform plugin, it went
down from 264 bytes to 138; for the jpeg image plugin, it went from 320
to 135.
I've had to change the signature so older versions of Qt won't try to
parse the CBOR data as Binary JSON. Unfortunately, before QJsonDocument
could get a chance to reject it, qJsonFromRawLibraryMetaData() needed to
allocate memory and that causes crashes with Qt < 5.11.2.
Change-Id: Ieb48f7c0dd0e4e0fb35efffd153bee34e16ce347
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's almost completely blacklisted anyways, and the parts that are
not are flakey.
Change-Id: I4601d751a2963c94c62ec439dd78b874034069a0
Reviewed-by: Liang Qi <liang.qi@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
For ControlType != QSizePolicy::DefaultType, qCountTrailingZeroBits()
is used which, MSVC 15.8.1 does not consider constexpr due to built-ins.
Exclude the check by #ifdef.
Task-number: QTBUG-69983
Change-Id: Ifc3dc3d94a804246bee1705fc8f3ac9b04ee4d32
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Synced QMetaObjectBuilder::MetaObjectFlag with the MetaObjectFlags enum
from qmetaobject_p.h. Also added a few comments for Qt 6.
Change-Id: Ieccd5cf8d512a6bf7256b2f4db88d45662774536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This feature is needed to register complex types (e.g. Q_GADGETS) at
runtime, using a single constructor method and added type parameter.
Without having the type id available to the Constructor it is impossible
to specialize behavior, thus requiring separate constructors for each
type. Generating these separate constructors at compile time is easy,
but not at runtime.
[ChangeLog][QMetaType] QMetaType can now register constructor for a set
of dynamic types.
Change-Id: I6071271d0e157864594dd07b4bc3a0abbeb15a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To avoid bothering the user who just wants to build all the test cases
in qtbase. It is better to move the docker related testing to the check
target. Then, it won't break the build procedure and force users to
finish test server provisioning in advance.
Change-Id: I2c4212297342c3eec7bcbebff9f991b7346d9503
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit e798e8a03b)
To avoid bothering the user who just wants to build all the test cases
in qtbase. It is better to move the docker related testing to the check
target. Then, it won't break the build procedure and force users to
finish test server provisioning in advance.
Change-Id: I2c4212297342c3eec7bcbebff9f991b7346d9503
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
the test uses CoreFoundation api directly, so it must link it
explicitly.
amends 6c8f32388b.
Change-Id: I76b7d8ab41d6a66138eb45bd0f067cfee8e96cb8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test uses CoreGraphics api directly, so it must link it explicitly.
amends b0abe20d4.
Change-Id: I734bfbedff56df731c1e528670f686565b63f3b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These autotests are not currently working with the Ubuntu 18.04
platform being introduced to the CI.
Task-number: QTBUG-70227
Task-number: QTBUG-70226
Task-number: QTBUG-70224
Task-number: QTBUG-70223
Task-number: QTBUG-70209
Change-Id: Ibe7cafd37763d7d305d8c3d9ec17bc6339db744a
Reviewed-by: Liang Qi <liang.qi@qt.io>
When QSqlQueryModel or QSqlTableModel is created it will create a
QSqlQuery which defaults to using the default QSqlDatabase connection.
If this connection belongs to another thread then it will throw a
warning as this is not safe to use. Since the QSqlQuery is always
recreated when a query is set, the instance which is a member of
the class can effectively be invalid until a new one is set.
Task-number: QTBUG-69213
Change-Id: I68a5dd59fe62788f531d59a0680da11b118ee383
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The previous implementation wrongly calculated the necessary data type
to hold the offset indexes. It looked at the amount of elements,
but instead we should look at value for the last element in the offset
array
Change-Id: I84c6985dc3c329df3bbc5a14f9789170877b65bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were missing a few languages CLDR knew about; so add them to the
list in enumdata.py (and add trailing commas to lists to make future
additions not need to change the prior last line; python is perfectly
happy with this).
[ChangeLog][QtCore][QLocale] Added support for Western Balochi, Ido,
Lojban, Sicilian and Souther Kurdish.
Change-Id: I0d24cff46a0ae8db48ec1db8762088f877319982
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This function allows to generate an array of offsets of substrings in
a string at compile time. This produces less verbose and easier to maintain
source code.
Change-Id: I5774b8b91906f6191f2b1244a676c07e7eb15b47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The table and macros weren't extensible enough for non-Latin-based
languages.
Change-Id: I950f06de57aaf6bd0b24e0056e4acee2fb655f3d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This autotest fails on the Ubuntu 18.04 platform.
Task-number: QTBUG-70153
Change-Id: I2a2b0075a046664cdf5733d8629f634b4e33dc6f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The test fails in a few cases due to the simplistic internal
implementation of TLD-checking, but it's still useful to run the tests.
Change-Id: Idafaed13506fbac2e67b1d2ba72da2f0c4e2904c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test had some shortcomings:
- Flakyness due to not waiting for the file dialog list
to be populated.
- It assumed that the hardcoded directory name
____aaaa... always would show first in the list. This may
not be true on Windows, where names like .designer show above.
- On failure, the test directory would leak.
This manifested in failures like:
FAIL! : tst_QFiledialog::clearLineEdit() '(fd.directory().absolutePath() != QDir::home().absolutePath())' returned FALSE. ()
To fix this, use QTemporaryDir and introduce predicates that
can be used to check whether the dialog has been populated
and the right file/directory is selected by pressing cursor down.
Use the temporary directory as not to pollute the home directory.
Change-Id: Ic504b91325993dcd6099c99e125e7ed8ff1d7672
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit fd38c97a6c.
Apparently our actual VMs for 10.13 don't get this right, although the
ones used in testing did (prompting the fix this reverts). We
probably have mis-configured VMs, but this is the quick-fix to get
development moving again.
Task-number: QTBUG-70149
Change-Id: Ib96755d8e21d9b226e22fc985f13f34fa04117b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Under certain circumstances, if you had a widget with a QOpenGLPaintEngine,
and drew QStaticText into this, and then later had Qt Quick access the same
cache and try to resize it, we would get a crash because the resize function
would have a pointer to the paint engine and try to access its shader manager
(which would now be null, since this is outside the begin()/end() phase of the
paint engine.
The solution is to reset the paint engine pointer to null on the cache once it
has been populated and it is no longer needed.
[ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText,
QOpenGLWidget and Qt Quick in the same application.
Task-number: QTBUG-70096
Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- three more tests cases on expected .qrc generation
- a new test comparing data read via resource with
the same data directly read from the original file
Change-Id: Ic34e68c9fc3fa110110161b57d4129ae44419020
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented the virtual method moveRows to allow row movement
[ChangeLog][QtCore][QStringListModel] Implemented moveRows
Task-number: QTBUG-69807
Change-Id: I518f48a321bd755ab56f2fe84883d27324cc42ec
Reviewed-by: David Faure <david.faure@kdab.com>
Fails on previous 42.3 and also 15.0. Just covering "opensuse" saves
us from new commits every time we upgrade our openSUSE. We have a bug
open of it after all.
Task-number: QTBUG-51399
Change-Id: I5c0869daea41b1886faba3d0caaa0804a3705d54
Reviewed-by: Liang Qi <liang.qi@qt.io>
_q_interpolate<T> subtracts 2 arguments of type T,
for unsigned types this can cause wrapping around
Task-number: QTBUG-57925
Change-Id: Iffa59f413579a3d5de8cb728fe71443d8e8a04aa
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We want to store the metadata size and get it from the plugin in Qt 6.
Change-Id: Ieb48f7c0dd0e4e0fb35efffd153bebc2914d9a3c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Frameless obscured windows do not receive WM_PAINT/expose events on
Windows. Qt::WA_Mapped needs to be set on them to ensure updating works.
Task-number: QTBUG-39220
Task-number: QTBUG-52039
Task-number: QTBUG-58575
Task-number: QTBUG-63927
Change-Id: Ic6c11f2be96378b6a6b61296f1f3e13cd49b50a6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After updating MinGW toolchain from 5.3.0 to 7.30 test starts to fail.
Task-number: QTBUG-69947
Change-Id: I850d854b27e1cb4e1dd2cb600e8e79bd18bff4a0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
They have been blacklisted on windows and macOS previously. Now failing
on WinRT as well.
Task-number: QTBUG-69962
Change-Id: I30ca23005b082e820ee896fa36a8984a1536ad6b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Assume two MIME types A and B are registered, both with the same glob
pattern, A being parent of B, A with some magic rule, and B with another
magic rule. Given a file that matches the glob pattern and the magic rule
of A, the resulting MIME type depended on the order of registration of A
and B, because it would just check if some glob matching MIME type was
also a subclass of the magic matching MIME type.
The patch prefers the the MIME type that matches by magic if that
matches by glob pattern as well (i.e. A in our example).
The "recommended checking order" of the spec does handle that case.
Task-number: QTBUG-44846
Change-Id: I2af43f6199faf9a42cd9c35d3a045441afbd6217
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch implements the support for QRegularExpression in
QSortFilterProxyModel.
[ChangeLog][QtCore][QSFPM] QSortFilterProxyModel now supports
QRegularExpression.
Task-number: QTBUG-46810
Change-Id: If932d55f98f9b8bcf3a72c03ffd51da52cb50ad1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
The match method still uses QRegExp. This patch updates the code to use
QRegularExpression and translates the wildcard patterns to a suitable
form for QRegularExpression.
[ChangeLog][Core][QDir] QDir now uses QRegularExpression internally for
wildcard matching. Note that QRegularExpression might not give the
exact same result as QRegExp as its implementation follows strictly the
glob patterns definition for wildcard expressions. Nevertheless, the
tests for QDir return the same results as before.
Change-Id: I095959443ac7362f7534e35454eff038061fca82
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This patch refactors the wildcardToRegularExpression method to generate
a simpler regular expression. It also fixes some shortcomings of the
previous implementation.
Tests have been updated to ensure all cases are properly supported.
Change-Id: I454e3fe8fe0bb663b2f319d6fa2fa8aec626c50d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QAccessible::StaticText should be mapped to UIA_TextControlTypeId instead
of UIA_EditControlTypeId.
Task-number: QTBUG-69894
Change-Id: If2f8f55d2be492c02a3af5b1813ca12cf774a33a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
After the behavior of setItemData has been changed following QTBUG-45114,
QStandardItemModel was lacking an interface to clear all the data from a single index.
Task-number: QTBUG-69616
Change-Id: Ide0b5bb6358439fc42c474df8b044fbace6def8d
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: David Faure <david.faure@kdab.com>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
The API originally proposed was flawed in the sense that the setter
function would use a modified version of the parameter given which would
have make it a black box for the user. This patch fixes that by removing
that setter and providing a static method that will return the pattern
suitably modified to be used by QRegularExpression the same way the
escape method does.
[ChangeLog][Core][QRegularExpression] Implemented support for wildcard
patterns through a static method.
Change-Id: I0054bcaffd7525dac569f54fa81f73b7e4544b2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I've tried to reproduce the failures in the CI a couple of times now,
but it keeps passing. Let's leave some debug output in the test so
that if/when it does fail, we might know a bit more about why it does
so.
Task-number: QTBUG-69492
Change-Id: I5b39ac692e9026ce4b25cd13d342b11e061b777b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
tst_QtEndian's transformRegion_template() was getting a
signed/unsigned comparison warning when T was unsigned in a
QCOMPARE(T-value, 0); so use T(0) instead.
Change-Id: I78cb2ab96f79393def65ed2c020aa3039017ab92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Problem:
CMake Error in CMakeLists.txt:
A logical block opening on the line
.../qtbase/tests/auto/cmake/CMakeLists.txt:149 (if)
is not closed.
Broken by change 02ed1b36da
Change-Id: I6c04721edbccaa9fcdb53af92d33dfa87eeaebb8
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
They have a separate type that we can't recognize directly, but we
can check if we can recognize the QFlags<T> form, though we have to
add a lot of template-conditions to avoid triggering QFlags static
asserts.
Change-Id: I00853682c5376dd3cc411ff151f47bce2389e277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds support for 16bit per color image formats in QImage. This makes it
possible to read and write 16bpc PNGs, and take full advantage of the
16bpc paint engine.
[ChangeLog][QtGui][QImage] QImage now supports 64bit image formats with
16 bits per color channel, compatible with 16bpc PNG or RGBA16 OpenGL
formats.
Task-number: QTBUG-45858
Change-Id: Icd28bd5868a6efcf65cb5bd56031d42941e04099
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Test that we don't silently replace an invalid TLS configuration with
the default one (for now, the only thing that is considered to be
non-valid - is having non-DTLS protocol set).
Change-Id: I6f714b009cf1345a085a3f26d638fc31330f1a94
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This autotest fails on Ubuntu 18.04.
Task-number: QTBUG-69892
Change-Id: I3673d06f06fcd8db307fc53c27724b227978f20d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A weird behavior of the DTLS server example, when linked with 1.0.2,
exposed that client code, requesting an invalid protocol (for example, SSLv3)
can end-up with connection encrypted with DTLS 1.2 (which is not that bad,
but totally surprising). When we check the protocol version early in
setDtlsConfiguration() and find a wrong version, we leave our previous
configuration intact and we will use it later during the handshake.
This is wrong. So now we let our user set whatever wrong configuration they
have and later fail in TLS initialization, saying -
'Unsupported protocol, DTLS was expected'.
Auto-test was reduced - the follow-up patch will introduce a new
'invalidConfiguration' auto-test.
Change-Id: I9be054c6112eea11b7801a1595aaf1d34329e1d2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QTRY_VERIFY was needed because the window doesn't initially have a handle,
and QTest::qWaitForWindowActive(QWidget *) only checks the active state of the
widget if it does, returning false if not.
This broken logic should be fixed, but for now let's make it clear what's
actually going on by using an explicit wait for the window handle.
Change-Id: I6dd89e0894efed14f4b9a2562dfe8ca76b5ef89c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's useful to know how many times the signal was emitted, because it
gives us insight into why the test may have failed, especially when
it's difficult to reproduce.
Task-number: QTBUG-69492
Change-Id: I94796ed880512b060e0a724c87edde8c3b91bb7c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests could change this property, and since the majority of the tests
share testWidget instead of creating local instances, we should be
thorough when cleaning up.
Change-Id: I6039fb6857f4f788f809b1d1fd491b4ef34923ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The majority of the test reuses testWidget. While this may be faster
than creating a QDateTimeEdit instance on the stack for each test,
it introduces issues when certain properties aren't unset when cleaning
up. This happens easily when new tests are introduced which rely on
certain properties, for example.
Rather than making the newly introduced step-modifier-related tests
use testWidget, this patch goes with the simpler option of hiding
testWidget, just like other tests currently do.
Eventually we should probably switch to using local instances
everywhere.
Task-number: QTBUG-69492
Change-Id: I4d5625be0b7c72db793346f43fe3a7e7c1241f13
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69648
Change-Id: I08bd892e2b6a733f3cda32091463745e8b8feed7
Reviewed-by: Simo Fält <simo.falt@qt.io>
By making the test independent of fixed top level widget sizes, it can
also be run on platforms, that do not support this feature.
Task-number: QTBUG-68297
Change-Id: I6945d259801360a9819b9b631d0a7497d3d27a9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We had 30s and 60s only, which isn'tenough for the Qt CI.
Task-number: QTBUG-69741
Change-Id: I00e04a465fcf4fc1a462fffd154782999e84ef8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The majority of tests use QPluginLoader::setFileName implicitly, which
refuses to do any work in static builds. Therefore the majority of tests
are skipped. But in the future we'll get tests here that for example use
QPluginLoader::staticPlugins() and for that we want to include the
sub-directory in the build and test run.
Change-Id: Ib8ec274e22ac8050feaca8967eb8626b53876b92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I'm intentionally not testing improperly-paired surrogates, since those
can't be encoded in CBOR.
Change-Id: I0d3cc366baaa49f3ad28fffd154240287ce34c22
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before libnss-mdns package is added to boot2qt dependency, the QEMU
devices should keep using the remote test server. There are two Linux
QEMU devices using 'linux-generic-g++' and 'linux-lmx7-g++' target
mkspec.
Relates to yocto/meta-boot2qt (Change-Id: I480f45)
Change-Id: I7870d3a184109e0abf712b4513148cf9a4520189
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
with a case when we fail to ignore/pre-set one of possible
verification errors.
Change-Id: I23b06243b61acef1ef3576c51529f3ef6601ba7d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's actually how ignoreVerificationErrors (and QSslSocket::ignoreSslErrors)
are used to set the expected/known verification errors before handshake.
Auto-test updated too.
Change-Id: I9c700302d81ddb383a4a750fafd594373fb38ace
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A default-constructed QJsonObject has no data payload, it is only a pair of null
pointers. So, when it becomes necessary to 'materialize' such an object, a
special global emptyObject constant is used as the substitute payload. There is
a small problem with this global constant though, namely that it's is_object
flag is unset. In other words, the emptyObject is not an object, but an array.
Fix by setting the is_object flag on emptyObject.
The example code in the bug report
QJsonObject parent;
QJsonObject child;
parent["child"] = child; // 1
child = parent["child"].toObject(); // 2
child["test"] = "test"; // 3
runs into this problem on line 1. Inserting the default-constructed child means
inserting a copy of emptyObject. On line 2 a pointer to this copy of emptyObject
is retrieved and cast to an object. But it's not an object, it's an array, so
things go wrong hereafter.
Specifically, on line 3, two inserts are performed, one from operator[] and one
from operator=. Each insert increments a compaction counter. The second insert
triggers compaction (QJsonObject::insert calls Value::requiredStorage calls
Data::compact) and compaction branches based on the is_object flag. Replacing
line 3 with
child.insert("test", "test");
causes the example to appear to work since compaction is not triggered and the
JSON serializer does not look at the is_object flag. Still, any further insert()
calls would trigger compaction and memory corruption.
Task-number: QTBUG-69626
Change-Id: I8bd5174dce95998bac479c4b4ffea70bca1a4d04
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If we ever need to add QCborValue to the bootstrap library, it's
unlikely that we'll need this part. And by splitting it, I can make the
code handle more cases, that hadn't been properly handled before.
Change-Id: I2f630efbbce54f14bfa9fffd154160c0ad893695
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no such file, if one of the "directory" components of its
path is not, in fact, a directory. Added a test for non-existent file
(specified to give empty canonical file path) as well as a test for a
file in a sub-directory of a known file. The former incidentally
tests for QTBUG-29402, fixed long ago.
Change-Id: I60b80acc0f99f0a88cdb1c4d191af7384f3a31c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use one QStringLiteral instead of repeating a QLatin1String(), that
was passed to a function that has to convert it to unicode; do the
conversion at compile-time.
Reducing i % 256 is fatuous when i ranges from 1 to 100.
A QFile will close() itself on destruction, no need to do it explicitly.
Especially when *not* close()ing the *other* QFile that was left open.
Change-Id: Idb39312d9c9beaf082b7cead574bc6bb9bb3a775
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we wouldn't even *try* to truncate if the file was open for
appending. The combination may be an eccentric choice but - at least
when it's combined with reading - I can imagine use-cases for it; and
we should (at least try to) deliver what we're asked for, even if we
can't think why anyone would want it. So actually enable truncation
when asked to.
Amended some tests to check this works and corrected the QIODevice
documentation of mode flags (which misdescribed the special case that
implies Truncate). Removed special-case code, to apply truncate when
writing but not reading, since it's been made redundant by the
pre-processing of mode done in QFSFileEngine::processOpenModeFlags().
[ChangeLog][QtCore][QFile] When opening a file, if Truncate is asked
for, or implied by other flags, it shall be attempted, regardless of
what other options are selected. We previously did this on Windows;
now we do so also on Unix (even when appending).
Task-number: QTBUG-13470
Change-Id: I1e08d02cfbae102725fccbbc3aab5c7bf8830687
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For keys, QSettings escapes all characters outside of [-a-zA-Z0-9_.]
by using percent encoding, and changes '/' to '\'. That is,
settings.setValue("qt.*", true)
will be written to an .ini file as
qt.%2A=true
This means that QSettings can not be used to write general-purpose
qtlogging.ini files. Fix this by applying the reverse transformation
method from QSettings when reading in the .ini file.
[ChangeLog][Logging] Qt will now accept qtlogging.ini files
written by QSettings.
Task-number: QTBUG-69548
Change-Id: I55b7a8b433291268dc6855901f72b1c04f8ee6d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
More Qt-style and more natural, also, shorter names.
Change-Id: I97bd68a8614126d518a3853027661435dc4e080d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Keep the original class name around for a little longer so we can
generate the correct scoped enum in the moc output.
Task-number: QTBUG-47652
Change-Id: Ib5934316fa786cc475335b03c86b8ec2dc239055
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When we have the named keys and not just integer values, we can output
something unambiously that closer match how the enums should be used.
Output of enums without proper metadata is left unchanged
Before:
QSurfaceFormat::ColorSpace(DefaultColorSpace)
QPainter::CompositionMode(3)
After:
QSurfaceFormat::DefaultColorSpace
QPainter::CompositionMode(3)
Change-Id: I537e879ba8b5c555b2aae9ba831facc88d430443
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The copy-assign operator tests against other.d being NULL but the
copy-constructor didn't. This can only matter if the value being
copied has been moved from, so we could probably replace with an
assertion in practice, but we should at least be consistent.
Amended test to check this case too; and verified new test crashes
without this fix.
Change-Id: I46872a677775944bbdf6a9112e719873e574ae60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch renames rather awkward 'remote' into more conventional
'peer' (similar to what we have in QAbstractSocket).
Change-Id: Ifc45e538b8adf9cc076bd7aee693277829fd94dc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All test cases use QPluginLoader which will not work for static builds of
Qt.
Change-Id: I7dcddcd5213681bd3ae4cd85e49ee0bb5748f687
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Visual Studio complained about the usage of a potentially uninitialized
variable which made compilation fail.
Change-Id: I0bc9d1e47d3b00b047912164c3bc4197a2058f85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The code I introduced in 4ee7425794 only
dealt with systems that reasonably used a 64-bit off_t parameter. Turns
out that we don't turn on largefile support on 32-bit Android, which
meant that the fix caused a regression.
[ChangeLog][QtCore][QFile] Fixed a regression that caused QFile::map()
to succeed or produce incorrect results when trying to map a file at an
offset beyond 4 GB on 32-bit Android systems and on some special Linux
configurations.
Task-number: QTBUG-69148
Change-Id: I2c133120577fa12a32d444488bac3e341966f8d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The helper application is only needed for Unix platforms, so there is no
need to build it for other configurations.
Change-Id: I4ebb896c66d3ded016f72fdbe631ec2f1276db22
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turned it into a data-driven test, with the old start-of-time as one
row, in order to add a regression test for an alleged MS API bug in
Windows XP.
Task-number: QTBUG-12006
Change-Id: I632ecc854f50f4183a990c8a27826ede9bd20e55
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCommandLineParser::addOption returns false in case of an error.
Tests should check it.
Change-Id: I3507e1c236a15a7c0a77c0c80f8dba65b664a535
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This function can be used to create std::array without the need
to explicitly provide the size of array. It also has a specialization
that allow to generate sorted array at compile time. Sorted array can
be beneficial for example in binary search.
Change-Id: Ifc7e06e451812fce2ab94293959db5e9cc038793
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add a framework for reading and decoding stored graphical texture file
formats. Includes decoders for the PKM and KTX formats.
This is basically the same texture file reading that was added to
qtdeclarative for 5.11, but has been refactored to be independent of
the scenegraph and opengl.
Task-number: QTBUG-67026
Change-Id: I87d8117550d8a2112f4f58c03e9ac6b3249cbc5a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
ObjectBoundingMode has inconsistent behavior and is deprecated in
favor of ObjectMode.
Change-Id: I748f6283f3db5869bb9a67c08bf5f16abc6f95b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69599
Change-Id: I575e6f52a539e03ab37ca62e580889854ddb9781
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
Wrong test was blacklisted for this commit.
This reverts commit 85607bd70d.
Change-Id: Ica5272799afec88c05e2cd137835bcdcb587836e
Reviewed-by: Simo Fält <simo.falt@qt.io>
Using QFileSystemEntry::isAbsolute() broke handling of resource paths.
Extended QDir::absoluteFilePath() tests to cover absolute resource path
and some UNC variants also resolved in the same fix.
Amend existing filePath tests to use drives where needed.
Task-number: QTBUG-68337
Change-Id: I4f02cf67828ad93e562857118f8442037f18bab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A RAII style class which calls a function at end of scope.
Example usage:
auto cleanup = qScopeGuard([] { <my cleanup code> ; });
[ChangeLog][QtCore] Introduced QScopeGuard.
Task-number: QTBUG-62894
Change-Id: Ife67f5c76255a1fafbae03367263da0bac9a0070
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The "boot2qt" platform needs to be blacklisted,
not "ubuntu-18.04".
This reverts commit 0d49ac0ffc.
Change-Id: I768a66c56f5fc7e0771473152579ed1c01bbbdb9
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Eight bytes into the Binary JSON header there's a 32-bit little-endian
size, which qJsonFromRawLibraryMetaData uses to determine the size of
the stored metadata. That value is passed as a size to QByteArray, which
means certain values could cause crashes due to being too big or via
sign-extension in 64-bit.
[ChangeLog][QtCore][QPluginLoader] Fixed an issue that could cause a
crash when certain damaged or corrupt plugin files were scanned.
Change-Id: I117816bf0f5e469b8d34fffd153dc5425cec39a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It might have been fixed in the three years since it was marked
insignificant, and we can't investigate the crash while it's not
tested.
Task-number: QTBUG-50747
Change-Id: I99cdeb55e207d10fe524cd5f4868f042c64eb7d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Kept the intended word (rather than "number system" or "numeral
system" as might seem more natural) since CLDR's
common/supplemental/numberingSystems.xml uses numbering in its name
and in the XML tag-names in its contents. Thanks to Kari Oikarinen
for noticing, in review.
Change-Id: I85077611f9de8c4e812e1b5324fa2e99868b7b95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should improve reporting and ensure we know about each failing
case, not just the first, when one fails.
Change-Id: Ic00272201f69a2fd8508df23b1d746ea605aa539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Cleaned up some related #if-ery in the process.
Change-Id: I70f3152f2096ec34f36782fa1c3329f51c9b34f0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Routine update in preparation for 5.12
* omitting Chakma because QLocale can't represent the zero digit,
* de_DE no longer uses vorm./nachm. but AM/PM
[ChangeLog][Third-party code] Updated CLDR to version 33.1
Task-number: QTBUG-67654
Change-Id: If20c47bb030abc3700b4f5a592152e617e2767c2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Rewrote some of them away, in the process, using string arithmetic.
Change-Id: Ie1a29abefab001889a22a8bc66c7eee608496786
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
This is preparation (the WS-only parts) for splitting up some
over-long lines, in the course of which I also fix some indentation.
Change-Id: I800490e328b5e16d40685dff04c09cd145d5eacf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
When using actual memory allocation, limit to 64 MB, not the full file
size. On most systems, the memory map technique will work, so this won't
even be tried. In any case, we don't need the fix for the OOM situation
that was applied in commit e211ab76d7.
As for the memory mapping technique, this commit limits the allocation
to reasonable values given the virtual memory addressing space. Half a
gigabyte is probably acceptable on 32-bit systems, where there should be
a contiguous space for the OS to allocate the file in. This commit also
fixes an overflow when converting from qint64 of the file size to ulong
(32-bit on 32-bit platforms and on Windows).
For 64-bit systems, we currently limit to 1 TB.
Change-Id: I117816bf0f5e469b8d34fffd153dc1705a8eedc4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There was no public API for doing case-insensitive comparisons
of QStringView.
Task-number: QTBUG-69389
Change-Id: I1b021eefec35e135b97fb87704c8dc137232d83d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixing some issues that could cause intermittent or environment-dependent
failures. One kind regards the use of multiple QTest::mouseMove()
calls in sequence internally using the QCursor API, causing timing
dependent failures. Switching to the override that does not require the
QCursor API, where possible. Other test could fail depending on the size
of the screen.
Change-Id: I4a368955ddbb48f729dcdf74c20eb163329936b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The logic seems to be simple - if client code on error signal
tries to close TLS socket and this socket has buffered data,
it calls 'flush' and 'transmit' or even 'startHandshake' as
a result, which in turn will set and emit error again. To auto-
test this, we initiate a handshake with pre-shared key hint
on a server side and both client/server sockets incorrectly
configured (missing PSK signals). We also do early write
into the client socket to make sure it has some data
buffered by the moment we call 'close'.
Task-number: QTBUG-68089
Task-number: QTBUG-56476
Change-Id: I6ba6435bd572ad85d9209c4c81774a397081b34f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch allows the developer to pick which keyboard modifier
increases the number of steps a QAbstractSpinBox takes when the user
interacts with it.
The modifier can be either Qt::ControlModifier (default),
Qt::ShiftModifier or Qt::NoModifier. Qt::NoModifier disables the step
modifier. Note that on macOS, Control corresponds to the Command key.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QStyle] QStyle::SH_SpinBox_StepModifier allows
the developer to pick which keyboard modifier increases the number of
steps a QAbstractSpinBox takes for the following interactions:
scrolling, up/down keyboard keys and the spin box buttons. The
Qt::ShiftModifier can now be used, or the feature can be disabled
using Qt::NoModifier. Previously, only Qt::ControlModifier could be
used as the modifier.
Change-Id: Ib5518127e86a8f67798a9a1d6e860c6e35896e6f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Do not return false for loading an empty .qm file - that is, a valid
file without any translations. We're already shipping empty .qm
files for English translations of Qt since a while, mainly as a
stop for the QTranslator::load(const QLocale &, ...) logic.
Note that QCoreApplication::installTranslator() will still return
false for an empty translation file - which is ok, because it
arguably does not make much sense to install it.
[ChangeLog][QtCore][QTranslator] It is now possible to load qm files
without any translations. This is particularly useful for the
language the untranslated strings are written in; logic to
load translations can now handle the source language like all
other languages.
Task-number: QTBUG-31031
Change-Id: Ibcb84aa755538cb2fa21b14f8635295a58440bbb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This flag was introduced to serve as a replacement for a dedicated "interactive" boolean
argument in method calls guarded by Polkit.
Change-Id: Ida91c9872e70f8ca6672563d0ca6642f38c498ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To resolve the challenge of connecting Docker containers from the host
without extra user-efforts, Avahi is used to publish the Docker-based
test servers (Docker containers) on a local network. It is a free
Zeroconf implementation, and it provides multicast DNS (mDNS) service
discovery. By default, mDNS only resolves hostname ending with the
".local" domain. In this change, the domain name of test servers is
changed to "test-net.qt.local". As stated in the standard, the DNS query
for a local domain will be sent to the mDNS multicast address. It avoids
the need for root access to modify system files.
Task-number: QTQAINFRA-1686
Change-Id: I255fba0720ee6d0e84c9cb5ca9289d4466578922
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Handle hard zero independently in each coordinate, otherwise hard zero
is never equal to anything but itself.
Task-number: QTBUG-69368
Change-Id: I8b1131472bb92efc706a04e0b067e2211a5ccb0c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QByteArray] QByteArray::toInt(),
QByteArray::toDouble() and the other number conversion functions
now ignore leading and trailing whitespaces, as their QString
counterparts already did. For consistency reasons, the same
behavior was added to qEnvironmentVariableIntValue() also.
Task-number: QTBUG-66187
Change-Id: I8b5e478ea8577b811d969286ea9e269f539c1ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and various other cleanups.
This patch re-factors tests that relied on QCursor API (directly or indirectly via
QTest::mouseMove widget overload) to use the QTEST_QPA_MOUSE_HANDLING code path.
Misuse of QCursor API causes tests to be flaky.
Removed Qt::X11BypassWindowManagerHint as it is not really needed. Based on
the comment where this flag is used, it would be needed for all test functions
that use mouse events. That assumption is not valid. A window is expected to have
received its final position when QTest::qWaitForWindowActive() returns. There were
issues with this on Unity, but those have been fixed.
Un-QSKIP-ed QTBUG_6986_sendMouseEventToAlienWidget for Q_OS_WIN.
Un-QSKIP-ed hoverEnterLeaveEvent for all platforms.
Un-QSKIP-ed bypassGraphicsProxyWidget for Q_OS_MAC and Q_OS_WIN as the test
passes on those platforms. According to QTBUG-33067 it used to crash with 5.2.0.
Removed unnecessary mouseMove() and stray mouseRelease() in mouseDoubleClickEvent().
Removed unnecessary show()/setVisible() on items that are being added to the scene -
items are visible by default.
Among other randomly spotted issues, one worth mentioning is that when adding
items to the scene after the view is already shown, we need to ensure that the scene
is updated (e.g QSignalSpy + QGraphicsScene::changed) before interacting with it. As
an example, mousePressReleaseEvent() only passed because of random luck that the
invalid coordinates were still within the bounding rect of the button. This patch
does not attempt to cleanup all instances of this anti-pattern.
Task-number: QTBUG-52546
Task-number: QTBUG-26948
Task-number: QTBUG-33067
Change-Id: I2ccbc004c1cb4f5b31c70c8568ee591c458d8446
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Similar to commit cd64a96b31 we also need
to normalize the strings before comparison in order to be compliant with
the ECMAScript test suite.
This patch also adds the remaining test cases from
built-ins/String/prototype/localeCompare/15.5.4.9_CE.
Since the same tests are also failing with strcoll/qt_compare_strings,
this simplifies the code to always normalize except when using ICU
(which gets it right by default).
Change-Id: I16b32da7fc70dc7e6725c49f66fe9941d0bf3a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This makes QCborValue more future compatible, as code written today for
tags that QCborValue does not recognize will continue to work if
QCborValue gains support for it in the future.
This change also obviates the need for reinterpretAsTag(), which I had
not written unit tests for as I knew this change was coming.
Change-Id: I052407b777ec43f78378fffd15302bdc34f66755
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing network test server has some limitations. Most notably, it
is not accessible by every Qt developer. Also, some services don't allow
simultaneous access, which causes flaky test results.
Instead of centralizing all the services to one physical machine, the
idea is to build up several dedicated servers inside separate Docker
containers.
1. Create testserver.pri and integrate it into the make check command of
Qt Test.
2. Define QT_TEST_SERVER flag for changing test parameters at compile
time.
Task-number: QTQAINFRA-1686
Change-Id: I0422ddb97eb8c11b4818771454851d19671253b1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
According to RFC 6347 a DTLS server also must retransmit buffered message(s)
if timeouts happen during the handshake phase (so it's not a client only as
I initially understood it).
Conveniently so an auto-test is already in place and needs just a tiny
adjustment - handshakeWithRetransmission covers both sides.
Change-Id: If914ec3052e28ef5bf12a40e5eede45bbc53e8e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Variable was declared outside #if-ery but only used inside,
leading to warnings when the define wasn't set.
Change-Id: Iad6a236bdf76b8ca0a58a84509d19f7e1a3e2df2
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
Change-Id: I9b07208413b9e101569a22505ad41f07ade4062b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
This matches an earlier fix for tst_QDateTime.
Change-Id: Idaf34a9d60d84202fd41d15455209457cc281f60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Questions:
1) should QCborMap::extract return value_type (a pair) instead of just
the value?
2) should the both return the iterator to the next element too, like
erase()?
Change-Id: I052407b777ec43f78378fffd15302a9c14468db3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change only adds them to the registry and reserves the IDs. The
next commit will handle conversions.
Change-Id: I56b444f9d6274221a3b7fffd150d2d49f40940c2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Similar to the changes made for tst_QLibrary:
0ac09c40f2
but even less intrusive.
Change-Id: I4bc0ba385e639f07f9b39cf8ba9542c27be8a3ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ambiguous template instantiation for types that derive from both
a QObject and Q_GADGET. For such types we treat them only as QObjects
as they extend the functionality of the gadget.
Task-number: QTBUG-68803
Change-Id: Ic42766034e14e5df43c4e6f7811e2c0be1dc7e74
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To make the minimum amount of changes:
- Extract the library files into the expected hierarchy.
- Introduce a variable with the path to the directory.
- Make the static function a member function so it can use the variable
Change-Id: Ibf3106c3606d198a8deb8cb2a5cbde57207221c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes sure the tests are skipped on Wayland.
Task-number: QTBUG-62188
Change-Id: Ia50d6cc02fbbac0fb6b77a16eb6372c1adb422d8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Input value which is over the highest acceptable value, but consisting
of a number of digits equal to or less than the max value should be
considered intermediate.
[ChangeLog][QtGui][QIntValidator] Input value with over the highest
acceptable value, but with equal or less amount of digits than the maximum
value is now considered intermediate.
Task-number: QTBUG-59650
Change-Id: I71a77c9c266f0f3b62c71ac6cb995019385c1cf5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The existence of the helper application confuses Coin which will
result in an error.
Change-Id: I3edf3f27acbe133b180d41a8ae950991e9a5b5da
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I53d5238ff36706eb9c6f8eb04b954ec595ca30de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I55078563304959c41e0dd9bb7bb91a6fc51e005a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTableView::doItemsLayout() updated the scroll offset for the vertical
header after layouting was done. Since the scroll offset affects the
viewport of the editors, the adjustment was done too late.
Therefore we update the scroll offset right after the scrollbars are
set inside QTableView::updateGeometries()
[ChangeLog][QtWidgets][QTableView] Fixed calculating geometries
for editors
Task-number: QTBUG-48244
Task-number: QTBUG-49548
Change-Id: I3b057764cf99d42d861928a1c73277d34b440f9a
Reviewed-by: David Faure <david.faure@kdab.com>
It was observed on OpenSUSE VM in CI - apparently, even after succesfull
read from UDP socket error was not UnknownSocketError. While it's under
investigation, the DTLS auto-test should limit itself by DTLS things and
barely test IO success (socket-wise) when needed.
Change-Id: I0773a02c591432b0d6c894f4131f70e41dc7ed72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It all started from the compiler's warnings about 'this' captured but
not used in lambdas. While fixing this it was noticed that 'client' socket
has a lifetime longer than the test case itself (the socket has a parent,
which is tst_QSslSocket object). The 'server' socket was simply leaked.
So there is no guarantee that some of them (or both) later, after the
test failed in one of QVERIFY, for example, does not emit 'encrypted'
upon receiving more data; this will result: in reading/writing from/to
invalid memory location (captured local 'encryptedCount') and/or probably
exiting event loop when it's not expected to do so.
Change-Id: I51de0493d989a5ba36de2cef58d35526c0e26cda
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QTest::addRow expects a format specifier; this usage makes GCC complain
with -Wformat-security. Use the "old" newRow call instead.
Change-Id: Ieed8e4f64ff5e3d0d4e87325629d20ed6839ff9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using SSE 4.1 because of the need for PMINUB.
Change-Id: Ib48364abee9f464c96c6fffd152ebd3f8ea7fe94
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
With ICU and on macOS it appears that the comparison is done on a
canonical form, while CompareString(Ex) does not do that, as the added
test verifies. Explicit normalization fixes that.
As a bonus, this also unifies the code path between regular Windows
and UWP by unconditionally using CompareStringEx (which requires
Vista or later).
This issue surfaced while running the ECMASCript 6 Conformance Test
Suite in QtQml.
This re-uses the existing test for localeAwareCompare, which was
disabled on Windows, macOS and Linux with ICU (the common case).
Change-Id: I52440fce60b54745ead1eff005ec51e98e2a79ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I034752b4e5d22b98f6def95fb53c2b1947dded03
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The previous approach of having the signalbug helper in a subdirectory did
not work for shadow builds, as QFINDTESTDATA would not find that dir. By
putting both test and helper into the same directory, the helper will be
found in the test's current working directory.
The second problem was that not putting executables into debug/release
subdirectories might have lead to the WinRT AppxManifest being overwritten
by the wrong configuration. When Qt is configured with -release for
example, it was possible that the debug manifest (Manifest files are
always created next to the target) is written last and thus contains
debug VCLibs as a dependency.
Change-Id: Ia39315432860405642542449296c16dd2ae9fa9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: I86640b22c9e7a258965805a661e1e8c3ead8d012
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
A follow-up of 9d078c8f147ea875e862360b0d7480201fbbcff7 in qtqa repo.
Change-Id: Ib7c1f5cf325e9ad0066aae139b0dc72bc0184b32
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Need to do the same for startsWith() and endsWith(). indexOf() is a lot
harder.
[ChangeLog][QtCore][QByteArray] Added compare(), which takes
Qt::CaseSensitivity as one of the parameters. This function is more
efficient than using toLower() or toUpper() and then comparing.
Change-Id: Ib48364abee9f464c96c6fffd152e69bde4194df7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When an internal DnD occoures in IconMode, the item is moved to it's new
place but the logic in filterStartDrag() has no clue about the fact that
an internal move happend. Therefore the item gets deleted. Fix it by
changing the event's drop action to Qt::CopyAction to avoid the deletion
as it is done within QListWidget DnD code.
[ChangeLog][QtWidgets][QListView] Do not delete item on internal move.
Task-number: QTBUG-67440
Change-Id: I873d3c9fa76e107e108d9af0dcf8cecd1e18a18f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
After the move to PCRE2, optimizing patterns has been a thorn in the
side due to the fact that PCRE2's JIT compiler modifies the pattern
object itself (instead of returning a new set of data, like PCRE1
did). To make this fit with the existing behavior, a read/write
lock was introduced, with the read part locking when matching and
the write when compiling (or JIT-compiling) the pattern.
This locking strategy however introduced a performance issue,
as we needed:
* to acquire a write lock to compile/optimize the pattern (incl. the
common case where the pattern was already compiled, so bailing out
immediately);
* to acquire a read lock during the actual match, to prevent
some other thread from optimizing the pattern under our nose.
This was due to the "lazy" optimization policy of QRegularExpression
-- optimize a pattern after a certain number of usages. The
excessive amount of locking effectively limited scalability.
Simplify the code, and drop that policy altogether: since JIT
compiling in PCRE2 is faster and pretty much "always recommended",
just always do it for any pattern (unless it gets disabled via
env variables) when compiling it.
This allows to go back to a plain QMutex, and now the actual
matching doesn't require acquiring any locks any longer. Of course,
there is still a mutex acquired just before matching for checking
whether the pattern needs recompiling in the first place; this can
probably be further optimized via double-checked locking (using
atomics), but not doing it right now.
This shift makes a couple of pattern options controlling
optimization useless, and allows to centralize the 3
QRegularExpression tests (which were actually the very same test,
just setting slightly different optimizations strategies).
While at it, install a stress-test for threading, with the idea
of running it under TSAN or helgrind to catch bugs in
QRegularExpression's locking.
[ChangeLog][Important Behavior Changes][QRegularExpression] Regular
expressions are now automatically optimized (including JIT
compiling) on their first usage. The pattern options
OptimizeOnFirstUsageOption and DontAutomaticallyOptimizeOption no
longer have any effect, and will get removed in a future version of
Qt. QRegularExpression::optimize() can be still used to compile and
optimize the regular expression in advance (before any match), if
needed.
Task-number: QTBUG-66781
Change-Id: Ia0e97208ae78255fe811b78029ed01c204e47bd2
Reviewed-by: David Faure <david.faure@kdab.com>
Before the fix is applied this test fails because QFINDTESTDATA will
return "/usr/" instead of the folder with the same name in the current
directory.
The 'usr' folder can't be located 'next to' the application since this
does not trigger the issue (QFINDTESTDATA looks for the folder next
to the executable early on). So we put it in a subdirectory and change
the current working directory to its parent directory.
Change-Id: I627679dcb6f2f6954264e23bfc1a71de3bff7203
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The ObjectBoundingMode coordinate mode of QGradient allows specifying
the gradient coordinates relative to the object being painted. But if
the gradient brush also has a transformation, that transformation is
applied in the logical, not object, coordinate space. That behavior is
counterintuitive. However, changing it now would break existing
code. Instead, we introduce a new coordinate mode enum with the
expected behavior, and document the old one as deprecated.
This prepares to fix the bugs below in qtsvg, by making
it possible to specify the same behavior in Qt as SVG has.
[ChangeLog][QtGui][QGradient] Add ObjectMode coordinate mode
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 18 to account for changes in the serialization of QGradient.
Task-number: QTBUG-59978
Task-number: QTBUG-67995
Change-Id: I8820a2555359812f3e1a46e37d6ac2cc29a2091d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
winrt still has some issues with some character sets. These
tests are skipped/blacklisted for now and will be investigated.
Task-number: QTBUG-68297
Change-Id: I898e3383a4673b6dc87815a75e705f3302a4cbba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A change between 5.11 and dev has modified the position of testqrc
inside the resource list. Adapt accordingly.
Change-Id: I697103f4b8c9e93bb613e814c47a4e68e9a997ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In order to get winrt CI checked, the network tests are being skipped
for now. As soon as winrt has landed in CI, these will be fixed and
re-enabled.
Task-number: QTBUG-68297
Change-Id: I692d72f9e0c97840bd7396551b4e707eec845ebb
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test is somewhat similar to tst_QSslSocket but is smaller (in scope, will
grow in future), it has no QTcpSocket/QAbstractSocket-specific things and
has more DTLS-specific code. At the moment it does not use our network
test server, all work is done in the same process with two QUdpSockets
and two QDtls objects. We test (both on client/server ends):
- parameters validation (for all functions that do this) and
the correctness of error codes/handshake states
- handshake procedure (with/out certificates and with pre-shared keys)
- timeouts and re-transmissions during (D)TLS handshake
- peer verification (and related verification errors)
- aborted/resumed handshake
- encrypted I/O
- DTLS shutdown
For now, this test is OpenSSL-only.
Task-number: QTBUG-67597
Change-Id: I27006bfe3d6c02b89596889e8482a782c630402a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... by adding a prefix to the resource.
On android there is a resource ("qpdf") which gets included in the root
in all applications, included from "src/gui/painting/painting.pri".
So we move the test data to a sub-folder.
Task-number: QTBUG-68596
Change-Id: I67f2ed79a32c68d9a76cafba8ef23fe0da7c0fe8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"terminate" and "terminated" both fail on Android since
QThread::terminate not supported on Android. So we should skip them.
Task-number: QTBUG-68596
Change-Id: Id0d1dde2cfa02bb2978e5dd16087bf8f3bf112b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QDateTime::springForward(), we test correct handling of times
in the gap; these are formally invalid and a mktime() implementation
may reasonably reject them causing our date-time code to produce an
invalid result. So handle that case gracefully in the tests, only
insisting on consistency between the two ways of preparing the date.
In one test, package the repeated code I was going to adapt into a
macro to save repeitition.
Task-number: QTBUG-68832
Task-number: QTBUG-68839
Change-Id: Ib8a16ff007f4e75ab2ccff05b1ccf00a45e50dc8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android doesn't use the proper zone-abbreviation, so just check it
starts with the right date-time. Revised the way the #if-ery for that
is handled, to avoid repetition of the (now more complex) condition in
the two tests affected.
Task-number: QTBUG-68833
Change-Id: Iceb5469f46c69ba5cdbaf7ca050ad70f2bb74f44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Have a test expect what it does produce rather than fail what we can't
fix.
Task-number: QTBUG-68837
Change-Id: Icda7bd9968682daf97d46d597f8bb0433560cde2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They used different messages for the same excuse, which weren't well
worded in any case; and their #if-ery was differently decorated.
Change-Id: I28f5032693aff1036cb086ac4032c669110a5cb5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This part of DTLS is relatively easy to test: we never do a complete
handshake. Certificates, verification, ciphers, etc. - do not matter
at this stage (to be tested in tst_QDtls). Errors are mostly insignificant
and can be ignored or handled trivially.
The test is OpenSSL-only: SecureTransport failed to correctly implement/
support server-side DTLS, the problem reported quite some time ago and
no fixes from Apple so far.
Task-number: QTBUG-67597
Change-Id: I21ad4907de444ef95d5d83b50083ffe211a184f8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When an item is explicitly hidden, then it should stay that way even if
its parent is reparented. The item itself needs to be explicitly shown
for it to be made visible.
Task-number: QTBUG-54843
Change-Id: I0c6eea9a936f82d5874e3246292bd16365440411
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68865
Change-Id: Ia245f72826be071e5617c417e3d9f50bdcc689a9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68864
Change-Id: Ib4baa458b80eea5861e89145b85d865e9a78989c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68862
Change-Id: Ib02c28ede135c9ba4303dbf0224b32b080762a31
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68861
Change-Id: I343d8b583d105a7e1cc336e94399cde9eb261e9c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on QEMU armv7 builds.
Task-number: QTBUG-68866
Change-Id: Idb4bf39712a22c40f6d779a46ad2dd1f456ef48b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 and QEMU builds.
Task-number: QTBUG-68860
Change-Id: I1907e713e8c743cf5cf8e284df516600a0c03dba
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It appears that in the 5 years since we deprecated this function, people
have not stopped using it. The removal of qt5_use_modules() caused lots of
troubles in packages still using it when they were compiled against Qt 5.11.0.
Instead, let's revive this function and keep it for the Qt5 life time.
See discussion on qt-development mailing list:
http://lists.qt-project.org/pipermail/development/2018-June/032837.html
Change-Id: Ic263e3bb6706268cb9ea38a0711665f166a3aa9e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QString::sprintf(), like the C printf-family, always includes two
digits in any exponent it outputs. Up to 5.6, number() and arg()
taking a double did the same; but changes at 5.7 to enable opting out
of the leading zero this implies for a single-digit exponent
accidentally opted out of it in args() and number(). This commit
fixes number() and arg() to include QLocaleData::ZeroPadExponent in
the flags they pass down to the C locale's doubleToString(), restoring
the prior behavior, including consistency with sprintf().
[ChangeLog][QtCore][QString] Formatting of doubles with single-digit
exponent, by number() or args(), now includes a leading zero in that
exponent, consistently with sprintf(), as it did up to 5.6.
Task-number: QTBUG-63620
Change-Id: I10c491902b8556e9f19e605177ead8d9fd32abd9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If there is a parent (typically an itemview) then StatusTip events
should be sent to that. However in the case of there not being a parent
then the event should be sent to the QHeaderView itself.
Task-number: QTBUG-68458
Change-Id: I2a8c11c973210c7adf1bf29443f224f968a357a9
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It was the same in all test rows, so move it from the _data() to a
fixed value in the test. Also, don't implicitly coerce C-string
literals to QString.
Change-Id: Ieee4c7ffbf251c4b69b5acd79125dfa93eb51d6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This property allows to change the default behavior in
which list items occupy the entire width of their column.
Setting it to Qt::{AlignLeft,AlignRight,AlignHCenter} will
reduce their widths to the minimum values, thus allowing to
have intermediate free space. Then the user will be able to
begin selections by mouse from this space.
[ChangeLog][QtWidgets][QListView] Added itemAlignment property.
Task-number: QTBUG-56606
Change-Id: Iae55c251379be4e45d0c0d69175ff4388b5785b4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is very similar to QJsonDocument, but there's no QCborDocument.
QCborValue is that.
[ChangeLog][QtCore] Added QCborValue, QCborArray and QCborMap, classes
that permit DOM-like access to CBOR data. The API is similar to
QJsonValue, QJsonArray and QJsonObject, respectively.
Change-Id: I9741f017961b410c910dfffd14ffca50dd8ef3ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When pasting text, it is possible that part of the text is still pasted
but part of it is not. For example, if there is a maximum length set then
only the first part of the text is pasted and the rest is dropped. In
this case it should still emit inputRejected() as not all of the input
was accepted. This amends c901cdadc0.
Change-Id: If7906767be27e88ed9914c50bf0427833de5b8fa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QIODevice represents considreable overhead, even with just QBuffer, for
parsing simple things. Benchmarking showed it was spending 25% of the
parsing time inside one QIODevice function or another. So this commit
accomplishes two things:
1) it increases the buffer size from 9 bytes to up to 256, which should
reduce the number of calls into the QIODevice
2) if the source data is a QByteArray, then use it directly and bypass
the QIODevice, thus increasing performance considerably
Change-Id: I56b444f9d6274221a3b7fffd150c531c9d28e54b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Adjust line positions to deal with negative leading which isn't included
in height of QTextLine.
Change-Id: Id7918968c0f9d7e65700b9e7a08fc5d761883f22
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
As the full range of TIME is '-838:59:59' to '838:59:59' then we cannot
use QTime as the object to store this data in. Therefore a QString is
used instead for passing the data to and from. This does not impact
existing code using QTime already as it will still convert it from
the QString to a QTime to give the same result as before.
[ChangeLog][QtSql][MySQL] The TIME data type is now treated like a
string-based type in order to respect the full range of the TIME data
type.
Task-number: QTBUG-57028
Change-Id: Ieb7105bff3043b845f76bc873d088e6bac1e4f10
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the fbo had samples > 0 set, it would use a temporary fbo with
a default configuration losing the HDR precision.
Change-Id: I7e9966165b3100f148c4ad24738f3ee71273f29a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The implementation of QTransform::transposed() had a wrong assumption
about the type of the result.
Task-number: QTBUG-68630
Change-Id: Ia5ce794efe773d74fb5fdaff3da8cae2b452e7e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The test doesn't make much sense on platforms that don't support window
activation.
Task-number: QTBUG-66849
Change-Id: I875314d026d666173ec345d0864ad41d66179783
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test is actually passing, so just enable it.
Task-number: QTBUG-66849
Change-Id: Ie1566b9e5e19f5ab6d919624aa14662a1d4483ec
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Link to a bug report so we can track the failures and figure out how to fix
it in Qt Wayland or if we should skip the tests in a proper way. I.e. with
platform capabilities or similar.
Task-number: QTBUG-66849
Change-Id: I7a16333c7d2284eb9da6efd4515891438e9976b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Unlike QNAM, our toy http2 server sends payload as one big chunk as soon as
it fits in the receive window's size. Internally, 'frame writer' splits this
payload into many DATA frames of the appropriate size (imposed either by the
default value or the one from the client's SETTINGS frame). If some test fails,
we can end up with a server waiting for the writer to send all the DATA frames
though it is not needed anymore - there is nobody to receive them after a failure.
This patch moves such a loop into the test server instead and stops the loop early
if needed.
Change-Id: Iea2dcd718d8f83386fd16004807f6447bf999435
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently when doing comparison with std::tuple the fallback toString
method is called which returns a Q_NULLPTR thus not allowing proper
diagnostic of the values that triggered an error. This patch
adds support for std::tuple to improve the tests output readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of std::tuple on
failure.
Change-Id: I046a55e2ce44c3f7728d51e4745120d38aa5e007
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtWidgets][QLineEdit] Added inputRejected() signal for when
a key press is not accepted by the QLineEdit. For instance, when an
invalid key is pressed for a validator set.
Task-number: QTBUG-57448
Change-Id: I39182a78b07b37c6da01905b8da4c57930e3454b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Nothing in this test references date-times.
Change-Id: I4005cda550d54abe46370963b1e91fab9829298d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Similar to Qt::GlobalColor, the presets allow the user to create
brushes based on predefined gradients, quickly getting pretty pixels
on screen.
The presets are based on the linear gradients from WebGradients, a
free collection of gradients, hosted at https://webgradients.com/.
The few radial and blended gradient presets have been excluded.
Change-Id: I1ce8f2210a6045c9edb8829ab3eddcc313549127
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Avoids an unused function warning.
Change-Id: Id221595920e9a34eb83b66fe123d664f60fcae05
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qFuzzyIsNull has a fixed range, where qFuzzyCompare can tell if numbers
are different in a more relative range. Without it QPointFs that are
heavily scaled will be interpreted as identical, when they are quite
different at their own scale.
Task-number: QTBUG-60359
Task-number: QTBUG-62161
Change-Id: Ic4ba90e9e994aedff5548d690f053eb309b0a60b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
