sqlite cannot be supported as Windows phone is
missing the needed memory mapping functionality.
Change-Id: I20e89292b9c7802c7402e8095854b72a9f21e614
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
As a side effect, this fixes wrong line break in "Third Party Libraries" section.
Change-Id: Ie6510fa94626a1c586621948a4681efdcf61f8b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows configure does not have -device-option yet.
A hack for android already generated the
qdevice.pri. But it did this even if no android
was build, so merged the device-option with the
android generation of qdevice.pri. The qdevice.pri
is generated earlier in the configure steps than
before to match the linux configure and allow
to set device options before the config.tests
are run.
Change-Id: I753cf0d5eba1479792a685d6e1f5acb38b970893
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
both variables are available class-wide anyway.
Change-Id: I97c13de9ead44638e9310b62f02d8cd1c910df94
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This option is required to build qtmultimedia without
Windows Media Foundation backend. In this case,
a full DirectShow backend will be build instead.
Change-Id: Ib29ba81ca6cbb00b609cc97fab7da29e61d31d6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A previous commit (7582bb5) added a line to disable xkbcommon
when building for Android. A similar line needs to be added to
handle QNX builds.
Change-Id: I34e91d989567b17e7e21b87d9c377360e4e56f68
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
shifts the makefile generation one directory level up.
this allows the top-level configure to leave the makefile creation
entirely to the qtbase configure.
this is not very clean modularization-wise, but consistent with -skip.
Change-Id: I7ee2d2f29f2e6619d61fe9b55faa0bacdf3c44c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's already done by the working directory.
the unix configure already did it that way.
Change-Id: Ia88d0877a2e24bc40a7083c2164982dec47f913b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the directory is sufficient nowadays.
the unix configure already did it that way.
Change-Id: I887e5ad594aef1f7bf5f4f92a6bdf0a13e4d0372
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
amends 0a1b89bff, which took care only of the unix version.
Change-Id: Idb82881a9c47e67c973500721fd499bcf41a848b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A top-level vcproj (really a .sln file) only makes sense when sub-
projects are generated too, since the solutions generator will ignore
all non-generated projects.
Originally-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Iff09279d5760b5114a4cfb9b58ad677f2f69fa58
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids that syncqt needs to forward to a yet unexisting file (which
will have a yet unknown location, when syncqt is run at packaging time
already).
the %inject_headers syncqt config variable remains, so it can be told
not to purge "foreign" files.
Change-Id: I127ff6e0b7d5702fb0acaee9a5b7940b482d3608
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this overrides the magic that makes examples only install their sources
in production builds.
packagers may want to force the build of the examples, so they can
package them up for demo purposes.
this is actually why we formerly had the split between demos and
examples ...
Task-number: QTBUG-30788
Change-Id: I5633f69404c5aa6846f5496e8f161a273a7a7da3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it belongs there (technically, it would not hurt to actually call it
from within autoDetection()).
Task-number: QTBUG-31095
Change-Id: I7eb53762513eb9cebfd22317c8f44fe123eb91dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
clearly, nobody's been maintaining them for an extended period of time.
Change-Id: I41c6b40026f107d34f7964934f36bc727fb6b795
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, rename it to syncqt.pl and rely on qtPrepareTool()'s new
ability to correctly invoke it as a perl script even under windows.
the wrappers themselves have been trivial at this point, so there is no
added value in keeping them, either.
Change-Id: I77cf65edbcfaa48ed1900defe940d4eb4b82d5b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
Several modules, including DBus, MySQL, and OpenSSL have
configure options of the form <MODULE>_PATH, which is used
on Windows (where pkg-config is not present) to specify the
locations of third-party libraries. These switches had been
implemented by adding extra variables which were referenced
in .pro files, to add the appropriate compiler and linker
switches. This is undesirable because it means there are
two independent paths for adding the switches to the build,
which can get out of sync with each other, and indeed this
had happened for some of the DBus tools.
To remedy the situation, all three of the switches were
reworked so that they added values directly to the principal
variables that are used in the project files. This reduces
maintenance, by ensuring that the pkg-config and non-pkg-config
paths appear the same to the rest of the build system.
Change-Id: Iae342f1d14b79fbcfef9fe38aadc803ad3141799
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The lack of eventfd(7) switches and auto detection
caused cross-compilations to fail on Windows hosts,
for builds targeting POSIX systems which do
not support eventfd(7), such as QNX and BB10.
Change-Id: Ic8f53c64066ece6f16d4dbc79c089b058401e632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For now there's only one architecture per host/target, but
this will change once we start detecting the CPU features
for both device and simulator on iOS.
For convenience we set QT_CPU_FEATURES to the resolved
value of the current architecture, so that simd.prf still
can use QT_CPU_FEATURES directly.
Change-Id: I28e8b339a5c30a630e276165254dba09a3da6940
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
QT_CPU_FEATURES is internal and only used by simd.prf, which is
also internal. This matches the available CPU features which are
detected using config tests and written to CONFIG in qmodule.pri.
Change-Id: I8eb35448e2954a54c228d3617f29afc0283a7db5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default lib and include dirs are resolved using the target
compiler and with a sysroot, so they are not relevant for host
builds.
Change-Id: Iceb2eb865d0732b9a6f5896ad126200ae8e8a04e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We now have host_build to distinguish the two, and we load
qconfig.pri from both the host and the target mkspec, with
host_build set correctly.
Change-Id: I8b8b80d5487d10bb1d4585d27d10300f609a7775
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Upgrades ANGLE to dx11proto (dx11-MRT-support tag), which splits out support
for DirectX9 & DirectX11. The DX9 codepath is used by default;
CONFIG+=angle_d3d11 must be passed to the ANGLE project to build for DX11.
Existing patches to ANGLE have been updated (or removed if no longer
needed), and a patch has been added to make DX9/DX11 codepaths mutually
exclusive.
Change-Id: Ibe13befadb94f04883eca449d0ee1f0da955ff92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Axel Waggershauser <awagger@gmail.com>
REDUCE_EXPORTS -> QT_VISIBILITY_AVAILABLE
REDUCE_RELOCATIONS -> QT_REDUCE_RELOCATIONS
!QT_GETIFADDRS -> QT_NO_GETIFADDRS
These will be used for Android build on Windows.
Change-Id: I2cde989e41dc5b7f9bef1345e935cc7e19aba983
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the dlls being in lib/ is kind of an accident (a side effect of how
qmake builds them). in fact, the libdir should be entirely irrelevant
for windows deployments (and indeed, the SDK is delivered with dlls only
in bin/).
Change-Id: If47e72b24774721a61ba63847f6132f88ff110be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's weird that the output from the two variants is differing, and that
after building qmake it appears to hang.
Change-Id: I2ac3ace11e958effe787b13e1300eb1d2839ae98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Make sure we actually link against the static version of the ICU libs for
static builds.
Task-number: QTBUG-29478
Change-Id: Ida7b439f11c5393bee43bfe804f9ec84bf272b34
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Should be applied to Qt modules. Not interesting for third party
users.
Change-Id: I8fce821af397e3ace011a426c762319f6d30004f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
this makes it possible to exclude modules from the build without moving
their sources out of the way. substitutes the much-requested -no-webkit.
not adding a symmetrical option, as it is relatively pointless:
to build only specific "leaf" modules, you only need to run
"make module-qt<module> ..." once you configured. and removing
particular "intermediate" modules is achieved with this very option.
Task-number: QTBUG-26697
Change-Id: I25cebdbd029885a2c653c4cde696f9bb78691768
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change the default libexec directory to 'lib' on Windows for default
configurations. This makes sure that e.g. qtwebprocess can actually
find & load the right Qt libs.
A separate libexec directory was introduced to avoid conflicts between
a system-wide Qt in PATH and a custom Qt installation. However, since
there are no system wide Qt installations on Windows this isn't an
issue, but getting the executables to find its Qt libraries is.
Alternatively we could have also placed it in the 'bin' directory.
However, putting it in the 'lib' folder carries the notion that,
unlike the binaries in the bin, the libexec executables might have
to be deployed with a target application.
The exception is when a separate archdata prefix is specified, and
$$archdata/lib won't contain Qt libraries. In this case we use libexec
like on the other platforms too.
ChangeLog: [Qt for Windows] Fixed launching of QtWebProcess.exe by
changing default libexec directory to 'lib'.
Task-number: QTBUG-29661
Change-Id: Icbb15fb98474d6fef8ac9310f2e2b482d3282f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is plenty of tests which rely on the non-presence of the variable,
rather than it being empty.
Task-number: QTBUG-29400
Change-Id: Ifa8aa68192750521869767e2d4d3796794f4d8f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
if the user just set an empty spec, everything will go wrong anyway.
Change-Id: I5ddaa2f0be1be96132260af8c869ba38e02eb3d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
config.summary has been opened in text mode, so the line feed character
should be "\n" instead of "\r\n".
Change-Id: Id73b0d698487cdd6f48902f3ae988c6a9fa59407
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the times when directory names starting with a dot were a problem under
windows are sort of gone. for well over a decade.
Change-Id: Ia1a0782c878a055cc5c094c6b3e4df0741368433
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
they cannot be legally used outside qtbase - it's the antithesis of
modularization.
Change-Id: I847844ea0ddce599f130f396d68cb61fa8f34135
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Moving variables to qmodule.pri allows to build all qt modules with user defined
command line arguments passed to configure script.
Task-number: QTBUG-27566
Change-Id: Ifa7991e9024df3fb4b1fd6536ee0d19b7c63d15e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When having a directx sdk, angle does get auto enabled
for all windows platforms. Windows CE directx builds on top
of opengl es 2, so if there is directx, there is also a
opengl es 2. So don't add more layers of indirection for
Windows CE. As well angle does not build for Windows CE.
Change-Id: I211a1de29431cd05d5cd60188f503d2cd299c9b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This aims to mimics the behavior of the -device option already present on the
configure shell script
Change-Id: Ia28306f5ed74b9cfa812aa3efa6b79d0bafa4994
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make sure that INCLUDE, LIB paths are again considered in configure
checks on MinGW. While gcc itself doesn't care about the variables,
qmake automatically adds them via -I, -L...
This broke with 9c2ec72b95.
Change-Id: Ic6214eeea9eb7c92961c37c3aa76c4fcaddb22b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Check presence of Direct X SDK depending on
compiler version.
Check for presence of the headers d3dcompile.h and
intrin.h (SSE2) as well as d3d9.lib and the shader
compiler since the header d3dcompile.h is
also present in MinGW.
Change-Id: I7ee9701f4f9dc175ed2d733db79dda46de4d69f1
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
- Introduce function for key prompt for usage in
verifyConfiguration() and showLicense().
- Prompt only once in verifyConfiguration().
Change-Id: I7028da1bda703a424e39477bd06b2639475739a4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
"-no-opengl" didn't clear the default value for "OPENGL_ES_2", which
meant "opengles2" got configured in.
Task-number: QTBUG-27840
Change-Id: Id7b8e3e268571d820bebfb3700d3961ec96be7fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so they are uniformly available to all modules.
Change-Id: I734f703c5923c42cb26f1456ed960cecc01c4b41
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need to generate a .qmake.cache file in the config.tests
directory on Windows to ensure that the config.tests can
actually be compiled before the qmodule.pri is created.
Task-number: QTBUG-27708
Change-Id: I8d9397a8cbdb2aa19a5318497177d76049f9fa91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This option is opt-in (default: no). When configured with
"-proxies-system-default", Qt automatically picks up the system
proxies.
Change-Id: I8cc002f29587854f448d97117b08c43d8eedec76
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
ANGLE is a component that implements the OpenGL ES 2.0 API on
top of DirectX 9. See the following for more info:
http://code.google.com/p/angleproject/
ANGLE is now the default configuration on Windows. If you
want to use desktop OpenGL, you should build Qt with the
following configure options:
-opengl desktop
To configure Qt to use another OpenGL ES 2 implementation,
you should use:
-opengl es2 -no-angle
Task-number: QTBUG-24207
Change-Id: Iefcbeaa37ed920f431729749ab8333b248fe5134
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a new non-native style for Qt.
It is intended as a replacement for the now aging
Plastique and Cleanlooks styles.
Change-Id: I30c0518a69e4e3b8b2b05ee7d84c3a5a1f307578
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qstringmatcher.cpp and qchar.cpp are included in qstring.cpp and
qunicodetables.cpp is included in qchar.cpp so these files should
not be compiled as standalone objects.
Change-Id: I323e0878af28b9e5fb2f659fb8077347b93fa439
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
stack-protector-strong gives performance benefits over
stack-protector-all and is still checking more than -stack-protector,
so seems to be a good middle way and we want to use it when it is
there.
The -shared option for the compiler (not the linker) prevents a
RIM internal version of qcc from forcing -fPIE, and should not harm
in general when set.
In addition, add a method "compilerSupportsFlag" for Windows as is
present in the Unix configure script.
Change-Id: Iba300e9cb82f34043e7b36f8e45287a1aed2a1a5
Original-patch-by: Greg Bentz
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
QMake can fail at arch detection, so remove
the silence here and fail when qmake does
not produce any Makefile.
Change-Id: I8826867952665a68f7205acf99ee6f1c9ead8513
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If one compiles ICU with MinGW the .lib files also have a lib prefix.
Take this into account when checking for ICU availability.
Upstream bug report: http://bugs.icu-project.org/trac/ticket/9603
Change-Id: Ia1ca49053b0ab41de45eec13799d94d5e934c42e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Make sure that defaultTo() and therefore autoDetect() actually keep
the "auto" setting for MSVC. We check for this later on in
verifyConfiguration.
Change-Id: Iebf1ef415161a09bbc871baa31ff9dc56d54acac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The default is the current behaviour: strip on installing release, no
strip on installing debug. This option does not change the
installation of debug builds because qmake does not support that.
Change-Id: Ic208d5ffe860d5f1ee1cafdc944e12001673d33f
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ia087beb886bbaec1a0976cd924440d8904044879
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Add line breaks where it's looking awkward in cmd.exe , and new lines
where needed. Also adapt some descriptions to the configure shell script
output.
Change-Id: Ie784e715f51f7ff692ee85f7c960dc4583b65b23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix help output for -no-fontconfig, introduced in commit 1838a6c2.
Change-Id: I686000d51c56fde56179dcebef31b0783c0dfc29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Also check for c++11 support in configure.exe (which is also used by MinGW builds).
The c++11 check is therefore moved from 'unix' to 'common' directory.
Change-Id: I082848f032c2770e52e34f331b83820f395c06b6
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
we don't need it any more, as the makefiles are self-contained now.
Change-Id: I1a560a8331856e246e03c55ec1b1dd1a5cb112e4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the bootstrap does not need CamelCase includes, deprecated headers and
whatnot, so just don't do it. the full thing will be run on qtbase by
qmake.
Change-Id: Idffdd4750a73574c8c32ee75d00080abfe37e03c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
for faster bootstrapping without a full syncqt run
Change-Id: I648f0a8fb09be021590c46e8e5e15667a316c817
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it needs no special env variables any more
Change-Id: I60a7ab6eabb9280b02cd510418c0842d05fc1306
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The -developer-build option in the configure shell script is right after
-force-debug-info, move it to the same place in the Windows version.
Change-Id: I9b944f8591011ce9987a4fb98f7d02d88160d9e8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Displaying config.summary sometimes results in an infinite loop because
the loop condition only checks that failbit and badbit are not set.
The eofbit may be set with failbit and badbit not set.
Change-Id: I209480fbf114365fd4fdf1289c988a386f9f2562
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It did not compile because at the time qconfig.h was preprocessed,
QT_NO_ICONV was already defined, causing the #define QT_NO_ICONV to
fail. It should be guarded like most other defines in qconfig.h.
Also fix QT_CUPS=no, QT_ICONV=no, QT_GLIB=no, QT_NOTIFY=no and
QT_LARGEFILE_SUPPORT=64 the same way.
Change-Id: Ic9e0295756c35cb7c62e18eb9b63b1410e7de051
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qurl.cpp was removed from the Makefiles on 6ab6b0fc1c,
but I missed the .pro file. You're not supposed to use the .pro file
anyway, it's just for opening in Creator.
But if you forget to remove the qmake build step, it would get compiled.
Change-Id: Ia52ae7349e195df58f76f8d2c5f8b46adfdc7454
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Under Windows it's quite possible that OpenSSL, DBUS or MySQL is
not installed into a central place. If -I and -L is
passed at configure time, it is added to all targets,
and if that path contained a conflicting header things would go
wrong.
Change-Id: Ic3338c49aa6eaa91b3abf5341e709ef604bf7aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i think this was a vestige from the old wince build proces
Change-Id: I13305de627c65fc1c93ba6d2383557ff5ea7a147
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
msvc cannot use the same library for debug and release builds
if openssl libraries are linked statically into the network library.
Change-Id: Ic27ede2d9531b94aff4c50c1699947ce72caf286
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Without this, if you ran 'nmake qmake' or 'jom qmake' in qtbase's
top directory, it would simply tell you that 'qmake' was up to date.
After all, there is a directory called 'qmake' there.
Change-Id: I6cdb405e8106c137ecbab27923e524b924b19c84
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Detect CUPS availability automatically when cross-compiling from a Windows
host.
Change-Id: Ife9bb90732c39794a7b760ced4aaea232612fe54
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Do not build windows styles when the target platform is not Windows. This
makes a difference when cross-compiling.
Change-Id: I2184d39ed253af1069c5cdcd6a848611cff24789
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Enable auto detection for iconv when
cross-compiling from Windows hosts.
Change-Id: I699e0a31d938403f5e80e74be90df87f11f361ba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
All auto detection tests were failing
because the default mkspec was not yet
installed during the time they were run.
Change-Id: Iad14580f38d1539d9831917e5c9c707eae4c0c90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this stopped the installation of mkspecs for windows ce
Change-Id: Ic57337904b88e4460f9f4110b08ecefb1a2eed8b
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
qmake is needed by autoDetection()/tryCompileProject() to be able to build the
tests. This patch also add a new method - generateQConfigCpp() - which
generates qconfig.cpp, needed to build qmake.
Change-Id: Ic304a364a13a2b3c28433f2a299df222a56fed67
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this was disabled before but
I2631ff687881278ba42edacd237a2130c103b69f
enabled it per default
Change-Id: Ic5a8e50d116cf6b15719668faf055967a6f34e06
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
now that the default specs really only forward to the real specs,
it is not necessary to copy any auxiliary files.
Change-Id: I169a61a045063b796062fe6af3a2afbe3f1c9da0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Remove a non-ascii character from configureapp.cpp to let it to be
compiled successfully with MSVC2010 x64.
Change-Id: I0b016630be49e8731cc438abca4ef959124138be
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake can now produce proper mixed-target projects
Change-Id: I797f055f6e1487b9aefb75eee91d6c2cc4e6e56e
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
always use normalized path separators, except when running native
commands or printing (note however that the qmake -query output will now
be consistently normalized).
Change-Id: I6ae920c3bc656cb517d1f4e4e5518cf79e002169
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Modify configure.exe to run some configure-time tests and check if
the SSE and AVX compiler features are supported.
The tests themselves required a bit of changes to compile with
MSVC. The include in sse4_2.cpp was wrong. And for whatever reason, it
didn't like the volatile variables, which GCC, Clang and ICC have been
happy with. This should produce no effect in compilation, though: even
dead code must be syntactically correct. We're not running the output.
Change-Id: Ibe5d0904a378a7efed853c7215f88a2ddcefb1b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Added three new methods, which are meant to be used internally to
configureapp.cpp:
- int platform(): returns an integer representing a platform
- QString platformName(): returns the platform name string to be used when
displaying the license agreement.
- QString qpaPlatformName(): returns the value to be defined as
QT_QPA_DEFAULT_PLATFORM_NAME.
Currently supported names are Windows, Windows CE, QNX and Blackberry. Default
is "Windows".
Change-Id: Ifa4d1b9c02cda956be9becdf8db195d3d494f1d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When trying to detect the target architecture, configure.exe will look for a
file called 'arch.exe'. However, in some situations such as when
cross-compiling on a Windows host to a Unix host, and depending on the
toolchain being used, the output file generated by config.tests/arch may
simply be called "arch" instead of "arch.exe", causing configure.exe to fail.
This patches configure.exe to handle both naming schemes.
Change-Id: I5798f716d732388c707564d4d45c4887ab3d3d9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Move CUPS code around to create a new CUPS printsupport plugin, this
fixes QPrinterInfo for CUPS which depends on the plugin to work.
It QT_NO_CUPS is defined then the plugin is not built and only Print
to PDF is supported under Linux.
* Move unused genericiunixprintersupport plugin to start new CUPS
printsupport plugin
* Split QPdfPrintEngine to create QCupsPrintEngine
* Remove LPR related code from QPdfPrintEngine
* Move CUPS specific code from plugin base class to derived CUPS class
* Remove forcing CUPS print engine to use PDF mode as PDF is now Native
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove all QT_NO_LPR uses
There is now no CUPS specific code left in printsupport/kernel except
QCUPSSupport which is needed for the dialogs.
Task-number: QTBUG-23060
Change-Id: Ie8fa4512a2424edc8943068e0fa9fb714cc42db9
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: John Layt <jlayt@kde.org>
- Add QWindowsEGLContext usable for ANGLE and Windows CE.
- Add QWindowsEGLStaticContext containing the display
for resource cleanup.
- Add EGLSurface to QWindowsWindow.
- Add a -angle option specifying the path to the external
ANGLE installation to configure, add libraries to
the mkspecs.
Initial-patch-by: Jabot Corentin <corentinjabot@gmail.com>
Task-number: QTBUG-24207
Change-Id: I5f80b1efb6996da7c5d70aa3720f7801c9e4c6af
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
If the system's compiler has extra features on top of the base
settings enabled or if the mkspec or $CXXFLAGS variable included some,
record them.
This will allow us to choose whether or not to use our own special
compilers, based on whether the system default compiler contains it or
not.
Change-Id: I87cada9fab4cfa58846a831d0a7c7b50d8fa87fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For the Unix part, this now obeys the -v option, printing the full
command-line it used to compile, allowing testers to identify why
something went wrong.
Unfortunately, it requires a full compilation cycle, instead of just
preprocessing. Just one more among the many on Unix, but maybe a
noticeable slow-down on Windows.
Change-Id: I654b70d99887e04c96731a5b91be9ad555e4d8fe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The hash value is not correct after choosing a different license.
Also, Unix configure does not report it.
Change-Id: I988fffc923c3894e8141a91fc50747e30e20966b
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
commit d60d98450a adds the support for
unix configure. This commit adds the same for Windows configure.
Change-Id: Ibcc604154fd7d0d9c6112ae5459d9bb842daf180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.
Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QMAKE_RPATHDIR, QT_LIBINFIX and QT_NAMESPACE were previously set in
qmodule.pri on Windows, and qconfig.pri on platforms other than Windows.
Make the behavior consistent, move them to qconfig.pri.
qconfig.pri is the correct file because these variables need to be
visible for _all_ users of Qt, and not only the other Qt modules (the
ones who load qmodule.pri).
Change-Id: I4d517488a80b134a78ebde8d3196bdab3c3ab991
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add some more of the prefix options that are
already implemented to the usage information.
Change-Id: I89ee37ebc6deee8b6a5fd5a1c16d26ae3ead1f30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This doesn't compile with a typical cross-compilation setup, which
generally won't include cups headers. The commit should have been
rejected, but wasn't, due to a bug in the Qt Project CI.
Since it now causes all other modules depending on qtbase to fail their
CI, it must be reverted to minimize disruption while the commit can be
amended and/or the test toolchain updated to include cups headers.
This reverts commit 80f7a38890.
Change-Id: I315ae275b37de358a74af28ab7bd691c9849acba
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
CUPS is the only supported print system on UNIX, LPR/PS support has
already been dropped but some LPR specific code still remains.
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove LPR related code from QPdfPrintEngine
* Remove all QT_NO_LPR uses
* Remove most QT_NO_CUPS uses, use QT_NO_PRINTER where necessary
Some QT_NO_CUPS uses remain in QPdfPrintEngine, these will be removed
in a following change implementing a CUPS plugin.
Change-Id: I439b6fad9cf88c3d24aa48e49475f49ad310dbad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Support mkspecs in subdirectories for cross compilation
under windows. Mkspecs in subdirectories are separated by
slashes.
Change-Id: Id3954cc38df2922b20156589335faad989ec0537
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure.exe's Makefile is created by configure.bat. While severely
lacking, it is what gets executed when the user configures, so
developers modifying configure.exe should use that too.
Change-Id: Ib216889594d08c980bfae6d2dbbb27ee9901375a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Except for the perl sources, just in case.
This helps if you need to open the output files in, say, notepad.exe.
Change-Id: Ibf46b74af2efd6936586650e1405750bfef17952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Let configure generate the QT_QPA_DEFAULT_PLATFORM_NAME in
qconfig.h. This allows us to override the platform name
using a configure argument.
This commit adds -qpa <platform> that lets the user specify
the default platform at configure time. Note that the default
platform is not checked against the tree since plugins are
allowed to exist outside the Qt source tree.
In the absence of -qpa argument, configure checks the mkspec
for a variable named QT_QPA_DEFAULT_PLATFORM. This check is
implemented only in the unix configure because it will be primarily
used in custom mkspecs (devices, boards).
If -qpa argument is absent and the mkspec variable is absent,
the default value is determined based on the OS as below:
Unix - "xcb"
Windows - "windows"
Mac - "cocoa"
QNX - "qnx"
Done-with: Jørgen Lind
Change-Id: I0df31811a1b901a3242bfada1232e596ebda04f4
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a global integer, to be used as a seed for the hash
function itself. The seed is randomly initialized the first time a
QHash detaches from shared_null.
Right now the seed is not used at all -- another patch will modify
qHash to make use of it.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I7519e4c02b9c2794d1c14079b01330eb356e9c65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This change will be needed during migration from QByteArrayData to
QArrayData.
Change-Id: I0c8d6f9ed3ef7c33af62736af55259a8f9a70c0f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add to list of disabled build parts (see
b9a498bf51).
This fixes the tests are currently built in developer-build
despite "-nomake tests".
Change-Id: I43282112e03328dd89d8c874ca31b0483742ddb3
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The only use of QUrl in qmake, moc, uic and rcc is due to QVariant's
internals, so let's disable it. This means those binaries are now
probably a lot smaller since the parsing and IDNA code don't need to
be present.
Change-Id: Ie156b0817d119b2ba5d3dcb9712a9fea2ee7d4a1
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Needed by QtWebKit now.
Change-Id: I177d8dcf6063a14501f7ba3081b43a29a48661c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This will be used later on as a base class for QTemporaryFile and
QSaveFile.
Change-Id: Ic2e1d232f95dc29b8e2f75e24a881ab459d3f037
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Do not write Q_BYTE_ORDER to qconfig.h in the configures. Instead,
we #define Q_BYTE_ORDER in qprocessordetection.h, since many CPUs only
support a single endian format. For bi-endian processors, we set
Q_BYTE_ORDER depending on how the preprocessor sets __BYTE_ORDER__,
__BIG_ENDIAN__, or __LITTLE_ENDIAN__ (instead of using a compile test
to do so).
For operating systems that only support a single byte order, we can
check for Q_OS_* in addition to the preprocessor macros above. This is
possible because qprocessordetection.h is included by qglobal.h after
Q_OS_* and Q_CC_* detection has been done. Do this for Windows CE,
which is always little- endian according to MSDN.
Change-Id: I019a95e05252ef69895c4b38fbfa6ebfb6a943cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This fixes the build for Visual Studio 2011.
Change-Id: I8c43eef851d76f8cdde13a57ea3dcd9cf32df0ab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the only difference is in the copy & del commands. the msys tools are
tolerant about windows paths, so this just works.
the in-makefile variant detection is stolen from tools/configure/.
Change-Id: Ia283c1fe2e2aaa8cd5b1dfd7ae29244115f07d65
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
switch blocks are noisy. this is nicer.
reshuffled the LibraryLocation enum to make table lookups possible and
future-safe.
using pointer-free tables to avoid adding data relocations.
Change-Id: I70ec2c2142ce02a15e67284e4b285d754d930da3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After commit e0acf65043, configure.exe
built with the x64 compiler could detect the same compiler twice,
breaking the -platform detection even when only one compiler is in the
path. Fix this by taking advantage of the CompilerInfo struct ordering
and ignore detection of the same compiler.
Change-Id: I583230520d2e0859196f9d7c8af31adbb981a6ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Makefile.mingw was using the test command which requires sh.exe. This
adds support for bootstrap using cmd.exe instead.
Change-Id: Ieb67843170d2745ce119cc8feaa5433aa82fd7d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
x86 processes get redirected to the 32 bit area of the registry,
while 64 bit processes access the registry in raw form.
Added the registry paths for 64 bit processes to see the 32 bit
registry keys for MS visual studio. (Wow6432Node)
This problem was revealed when we stopped including configure.exe
as a binary checkin to git. Running configure in an x64 compiler
environment results in creating an x64 configure.exe
Change-Id: I5e3e51ddbf20ccc65abf1833bf23ee5670bd973e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
it is *ugly* to have the binary in the repository.
this adds a few seconds to the windows build, as the configure needs to
be rebuilt, obviously. that's almost negligible.
Change-Id: I40ffde23b3c3af2b6bab3e78cd0a9f433214b563
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
it doesn't serve any puropse (any more?) and it breaks the mingw build.
Change-Id: I02a5e7502586e7e9f5956991498ff602eff66e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
Before -mp and -no-mp affected only projects built with Qt.
There was no way to turn off msvc_mp for the Qt build.
Qt projects can add msvc_mp themselves.
Task-number: QTBUG-23929
Change-Id: I08b9ec762c59d2604635d73396044a74f717728c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This method has been deprecated since Qt 4.2.
QDir::toNativeSeparators() replaces it since then.
Change-Id: I49e6e1bfd50f26aa30134e599ee82067709549a7
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Avoids conflict with macro on Mac OS.
Change-Id: I3426c2dc514240d80996d823b7a552c13a09f99e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
At the moment users of Qt must detect if it was compiled with SSL
support by testing for QT_NO_OPENSSL. This means that any code that is
conditionally compiled this way is tied to the presence of the openssl
backend. This commit makes it possible to implement new SSL backends
during the Qt5 lifetime without breaking this code. People can still
test for QT_NO_OPENSSL if they really need openssl, but if they simply
want to know if there's SSL support at all they should use this define
instead.
In addition, this commit changes the public API headers to use the new
define.
Change-Id: Ib57a71aa65836ac9351f120a487bfeb8009d9515
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
There's no good reason to still differentiate between 'Nokia' developers,
and Qt developers outside of Nokia, inside configure. Just use
-developer-build -opensource -confirm-license.
Change-Id: I8726947dae0c70412eb52bf9d88eda4aa061ef26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.
Fixes link failure when building qtdeclarative with jom on Windows.
Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In a Qt 5 world, these have no relevance, so remove them.
Task-number: QTBUG-23022
Change-Id: I2f52c7aa1fcb8234046dd95b4d702791d20514fa
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
See qcocoaaccessiblity.h for details.
For now only the first level of the hierarchy is
made accessible.
Also add tools/accessibilityinspector which is an
utility for inspecting and debugging the Qt
accessibility tree.
Change-Id: Iff520bec26b3761feb0c2e00471feb379daaa735
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
As windows' fontdatabases also uses functionalities from
qbasicunixfontdatabase it was renamed to qbasicfontdatabase. But instead
of iterating over the font directories' files it uses system calls to
obtain the list of fonts and uses registry values to find the according
filenames to add.
The native font engine was still kept. It can be activated by adding
fontengine=native as platformargument.
Change-Id: I7197bed5d18b8a33d4aa97ce91bfa1cd281b80ea
Reviewed-on: http://codereview.qt-project.org/5839
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Sanity-Review: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
If qtbase was configured to build both debug and release versions of
libraries, it makes sense for any modules we are building to do the
same by default.
Change-Id: Idb5f78a7414b6ed2bacf295ad01f259fca435410
Reviewed-on: http://codereview.qt-project.org/4702
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
